How to make the facade of the house beautiful for little money? Finishing the facade of the house with your own hands - from what and how Do-it-yourself facades of private houses

The question of what is cheaper to finish the facade of the house is relevant for almost all owners of private buildings. After all, on the one hand, I want the cladding of housing to be of high quality and aesthetically attractive, and on the other hand, it is obvious that unjustified expenses in the pursuit of "exclusivity" and stunning appearance are useless. Rare are families who can afford any solution without regard to its cost.

But also go to extremes, stopping at the very budget option, without an objective assessment of the ability of the selected material to "resist" an aggressive outdoor environment - wind, rain, frost, snow, etc., definitely not worth it. Unless, you want to see in practice the effectiveness of the saying "the miser pays twice."

Of course, it will not work to decorate the facade of the house cheaply, but choose optimum material, which, other things being equal, will have a lower price, is quite realistic.

Criteria for a competent choice

In order to decide how best to finish the facade of the house and at the same time not lose money financially, it is very important to clearly define the criteria that help identify the advantages and disadvantages of one or another option.

First of all, you should pay attention to the appearance of the finished facade. Of course, the "presentability" of the cladding is a very, very subjective concept, directly dependent on the personal tastes of the owners. However, such parameters of the materials used as:

• number of proposed color variations and invoices
• resistance to fading and other visual defects,
• similarity to natural raw materials (if an imitation product is considered)

under no circumstances should it be left unattended. They will help to make an objective impression about the product.

The next quite obvious criterion is the durability of the material. Agree, it will be very sad if the inexpensive facade of the house turns out to be a real headache with the need for annual re-innovation work. If the type of cladding you like good term services - know you are on the right track.

It's no secret that facade material It's not enough just to choose. It still needs to be installed. The complexity of the task, the presence of seasonal restrictions, the volume of auxiliary elements and materials - all these factors must be taken into account.

And finally, the total cost outer cladding. This should include:

• material cost per kilogram or square meter;
• the price of components, tinting, necessary equipment;
• the cost of installation (and, if necessary, preparatory work).

Ceteris paribus, you can safely focus on the final cost of finishing the facade when choosing.

Popular options for exterior home decoration

Most often, owners of private houses prefer facade cladding:

• siding;
• facade plaster;
• block house;
• facing brick - ceramic or clinker;
• facade tiles.

Siding - a good choice or not?

The main types of siding used for cladding the facades of houses are vinyl and basement. Aluminum is rarely used in residential construction. Key Benefits material - safety, relative ease of installation, ease of maintenance.

And the most obvious drawback is the artificial appearance. And, we can say that this fact almost crosses out all the advantages. In Europe, for example, siding is used only when it is necessary to clad utility or temporary buildings. And although basement siding, unlike vinyl, imitates natural brick or stone, it still “breathes” with plasticity.

As for the service life, siding manufacturers assure that their “children” are able to serve faithfully for 40-50 years. But in practice, this figure is usually much less, since the material is fragile when severe frosts, unstable to deformation, prone to burnout. Cases when it is sad to look at siding after 5 years of operation, unfortunately, are not rare.

When installing siding in the cold season, it should be borne in mind that the material has high rate thermal expansion.

average cost

Vinyl siding will cost you about 200 rubles / sq. m. The total cost of such a cladding, taking into account installation and necessary auxiliary elements, is about 1500 rubles / sq.m.

Basement siding is a more expensive pleasure. The material itself costs an average of 400-500 rubles / sq.m. The actual cost of finishing the house with him is 3000 rubles / sq.m.

Advantages and disadvantages of plaster

Plaster - a coating that can provide the facade with a decent appearance; waterproof, breathable. Depending on the connecting link, facade plasters are:

• mineral (base - cement);
• acrylic (base - acrylic resins);
• silicate (base - liquid glass);
• silicone (base - silicone resin).

The variety of textures and colors of this material is very limited. In the vast majority of cases, such lining must be additionally painted. And the texture can usually be chosen either rough or rustic.

The service life of a facade finished with plaster is 7-10 years. And although over time the plaster becomes stronger, to mechanical damage she is not standing.

Installation subtleties

It takes 6-8 weeks to decorate a house with an area of ​​150-200 square meters with facade plaster. Surfaces must first be primed. "Wet" processes make the installation of facade plaster highly dependent on weather conditions and the season.

Note! The low vapor permeability of acrylic plaster makes it impossible to use it in "tandem" with such a heater as mineral wool.

Only mineral plaster is “suitable” for a gas-foam concrete base.

average cost

1. Mineral plaster. The cost of the material is about 40 rubles / kg. Consumption of plaster per square meter - 3 kg. The total cost per square meter, including payment for installation and all necessary materials, is 2000-2200 rubles.
2. Acrylic plaster. The cost of the material is 50 rubles / kg. Consumption - 1.5 kg/sq.m. The total cost is 2500.
3. silicate plaster. The cost of the material is 100 rubles / kg. Consumption - 2.5 kg/sq.m. The total cost is 2800.
4. Silicone plaster. The cost of the material is 100 rubles / kg. Consumption - 3 kg/sq.m. The total cost is 3000.

Block house features

Block house - a subspecies of lining, with its front surface imitating a rounded log. This material is natural and environmentally friendly, but rather expensive and short-lived. Not fire resistant. Of the flaws in appearance, knots, cracks, wormholes and other defects characteristic of wood are possible.

When buying a block house, you should make sure that it is not "raw" - otherwise there is a high risk that the material will rot.

Important! Block house, like any wooden surface located on outdoors, needs periodic updating - coating with special protective compounds, etc.

average cost

The price of a block house largely depends on the type of wood. The cost per square meter can range from 400 to 1000 rubles (including installation work and necessary processing- 3000-4000 thousand)

Facing brick - quality and durability

Facial ceramic brick- this is an environmentally friendly material from natural raw materials (clay), manufactured using a special technology. It is frost-resistant, durable, demonstrates low moisture absorption and good sound insulation. Facing clinker bricks are produced in the same way as ceramic ones, but are fired at a higher high temperature, so that there are no voids in it. Compared to ceramic, it has even better physical characteristics.

Facing brick has a wide range of textures, shapes and colors. With it, your facade does not risk fading. The only possible external drawback is the appearance of efflorescence.

A house finished with front brick will look luxurious for decades. Clinker brick is an example of durability, it is able to withstand more than 150 freeze-thaw cycles.

Facing the building with bricks should be taken into account even at the design stage (the material is laid on the main foundation). Otherwise, additional strengthening of the foundation will be required.

average cost

The spread in material prices is quite large, but, of course, having the status of a leader in terms of durability and quality, facing bricks simply cannot be cheap. Professional brick laying is also quite expensive. Therefore, the average Russian rarely chooses this option for finishing the facade.

A square meter of ceramic brick will cost 1200-3000 rubles, clinker - 3600-4000. A square meter of finished, beautiful and insulated brick facade in general, it will require up to 6000 rubles.

Facade tiles: pros and cons

Facade tiles are a modern and reliable building material. Not afraid of moisture, strong, durable. At quality styling- provides excellent appearance of the house. The service life of a facade finished with ceramic tiles can be tens of years. True, much depends on the quality of the adhesive solution.

Mounting facade tiles is usually not easy. The process becomes more difficult:

• the need for careful preliminary surface preparation;
• the difficulty of achieving straightness of the seam;
• high brittleness of the material before laying.

average cost

Facade tiles, in comparison with brick, demonstrate the final result that is no worse in terms of quality and aesthetics, but costs much less. The price per square meter of material is 1000-1500 rubles, while the actual cost per square meter of such cladding usually does not exceed 3000.

Really inexpensive decoration of the facade of the house can only become if you do it yourself. As you can see, some materials, at first glance, seem extremely cheap, but in practice, taking into account the cost of all auxiliary elements and the entire scope of work, it turns out that this is not the case. And only if you decide to take on this rather difficult work on your own, you can talk about significant savings.

This video will acquaint you with the rules for installing vinyl siding:

When choosing materials for facade cladding, it is very important to objectively evaluate their "perspective" - ​​how long they will last, how often they will need maintenance and renewal, what investments and how soon they may require.

It will not be superfluous to look on the Internet at photographs of various types of facades, to feel which “performance style” you like best. The appearance of the house should not just be liked - you should be in love with it. It has been proven that this moment directly affects the psychological comfort of staying inside or near housing.

To understand how cheaper it is to finish the facade of a house, photos of various cladding options are unlikely to help, but they will clearly contribute to a clear idea of ​​\u200b\u200bwhat awaits you in the end when referring to a particular material.

Having thoughtfully weighed all the nuances, we are sure that you will be able to make the right decision, which will be optimal for your family, both from a financial and aesthetic point of view.

Do-it-yourself facade decoration of a private house has recently become more and more relevant. This is dictated by both economic and aesthetic considerations. Many owners want to make their home original and embody their idea of ​​the beauty and aesthetics of the exterior of the building. When doing all the work with your own hands, this is the easiest. In addition, you can save a lot, do everything efficiently and choose the best materials for the job.

Thanks to the current abundance of various materials, there is a huge mass of options for finishing the facade of a private cottage, house or cottage. It doesn’t matter what exactly the building is made of - chopped logs, bricks, aerated concrete or anything else - there is a decent way to decorate for each option.

Finishing the facade of a wooden building

The decoration of the external walls of a wooden house is of particular importance due to the "capriciousness" of this building material. It is hardly worth talking a lot about the properties of wood, which strongly absorbs water, tends to dry out, change its volumes, etc. It is much more important to decide how to protect the facade of a wooden house so that the walls remain intact for a long time, and at the same time the building looks beautiful.

Finishing the facade of a cottage made of chopped logs is simplified by the fact that this material contains the so-called sapwood. it upper layer wood, rich in natural plant resins. They protect the walls from decay. This chopped log compares favorably with the same beam or logs. But no matter what the wooden building was built from, its facade should still be protected from heavy rainfall and other natural factors.

Painting a wooden building

The walls outside the wooden house can be simply covered protective layer paint (photo), trim with siding or decorative bricks. Painting the facade with your own hands is the easiest and cheapest way. Finishing in this case comes down to wood treatment with an antiseptic, and then painting. Attention: you need to buy special paint - for external work!

This method is suitable if the owner of a private house does not have any special requirements for finishing the facade and if the walls of the wooden structure are in a completely presentable form (the house is built from high-quality, perfectly polished timber, for example). But if the house is old, and its facade needs repair in some places, it is better to close the tree with siding or brick.

Finishing the walls of a wooden structure with siding

Siding is now the most sought after material in the construction and repair of the external parts of the building. It has a lot of advantages:

- low price;
- simplicity and ease of installation, which can be done by hand without any special knowledge in the construction and repair field;
- very long term operation;
- excellent protection of the walls of the house;
— neat appearance;
- the ability to easily hide a layer of insulation under the panels.

There are many types of siding, but plastic is the most commonly used. It is unpretentious in installation and operation, very light, due to which it does not create a completely unnecessary additional load on the facade of the house. It is easy to mount it with your own hands in the shortest period of time (photo).

Before sheathing the building, you can immediately insulate its walls. To do this, use mineral wool, expanded polystyrene and similar porous materials that retain heat well. The insulation is laid between the bars of the crate, after which the siding itself is mounted on top of it.

Finishing a private house with decorative brick / stone

Finishing the facade with a layer decorative brick- the most beautiful, presentable and reliable way of registration. It can be used both in wooden and in brick, block and other buildings.

The photo above shows a diagram of such a finish. To wooden wall of a private house, the insulation boards will have to be fixed with the help of special hardware with a wide hat. To a wall made of brick or aerated concrete, the insulation can simply be glued with special glue.

Reinforcing is applied on top of the expanded polystyrene plates in 2 layers. cement mortar, which will strengthen the walls and be the base for finishing decorative material(brick, plaster). A fiberglass mesh is laid between the layers of the reinforcing solution. Plaster must be applied to the ground coating.

Do-it-yourself facade decoration with decorative plaster

The facade of a private house does not have to be sheathed with siding or trimmed with decorative stone / brick. You can also do simple plastering. However, with modern possibilities, it is not at all simple. If you decide to make plaster with your own hands, you will need patience and strict adherence to technology. Otherwise, after drying outer coating crack or even peel off.

With the described shortcomings, plaster is a very beautiful, environmentally friendly and practical coating. There are many varieties of both the plaster itself and the methods of applying it to the facade. Regarding the material from which it is made, there are 4 main types:

1. Silicate. Produced from waste glass production, it has good strength. Silicate plaster "breathes" and passes water vapor.
2. Mineral. Produced from a mixture of cement and additives. The good thing is that it is cheap and resistant to fungus.
3. Acrylic. The composition of this plaster includes synthetic resins, thanks to which the material not only "breathes", but also perfectly tolerates frost, and is distinguished by excellent plasticity.
4. Silicone. The most expensive, made from complex combinations of polymers and has all the advantages of a high-quality modern finish coat from this series.

Plaster bark beetle

Also, plaster can have a different structure: be more or less homogeneous in composition, have the so-called "pebble" or mosaic texture. Bark beetle plaster is very popular. Such a finish is made from a more or less homogeneous plaster structure by rubbing a freshly applied coating with a plastic trowel.

If you decide to make such an effect with your own hands, it will take a little practice. After applying a smooth layer of plaster, it must be rubbed into different directions: horizontal, vertical and circular. As a result, chaotic strokes are obtained on the surface of the material, which produce the effect of a tree eaten away by a bark beetle.

Some important points in working with plaster

Before applying plaster, the surface of the walls must be properly prepared. If the previous coating is in poor condition, it must be removed. Carefully remove dirt, loose pieces of old plaster. If the previous layer holds well and has no defects, it can be left. Simply apply transverse grooves so that the new coating "grabs" better with the old one.

It is possible to form a relief not only by rubbing, but also by the splash method. In this case, small portions of plaster are sprayed with sharp and short strokes on the walls.

And mandatory for any type of finish is the use of a level, or level, during operation. The coating must be applied evenly. These are the main methods and ways of finishing the facade of a private house, which, with some practice, can be done independently.

Everyone knows that the facade of the house is its face. A beautiful and well-groomed appearance always makes a positive impression. Also, the decor of the facade of the house allows you to draw conclusions about the tastes of the owners of the house. The design should be not only original, but also functional, that is, it should have heat-saving, moisture-proof, fireproof qualities.

This insulation technology allows you to give the exterior of the building a unique appearance.

Natural stone facades - elegant, reliable and durable

Decorative plaster yellow shade- the color of optimism and joy of life

Modern technologies make it possible to produce durable and beautiful facade decor from a wide variety of materials.

Styrofoam

Polyfoam is one of the most common materials. Wide application the production of foam decor received due to a number of advantages:

• ease;
• strength;
• high resistance to temperature changes;
• simple installation;
• low cost;
• invisible seams between products.

Facade decor made of polystyrene foam can be mounted independently. Most often, the following elements of home decoration are made from such material.

In terms of strength and frost resistance, polymer-based panels are superior to many building materials.

Due to the decorative appearance and the richest color range, facing bricks remain in demand in the construction of houses and cottages.

The list presented in the table is far from all the decorative elements that can be created from foam.

Metal panels will last a long time even under harsh climatic conditions

The solid appearance of the building is given by a wall of marble stone.

Stone wall decoration will last a long time even under harsh climatic conditions

As already mentioned, the installation of foam products is affordable and does not have any particular difficulties. It is quite possible to decorate the facade yourself. To do this, you will need to follow these steps in sequence:

1. Clean the surface from dirt, dust.
2. Prime the wall and leave it to dry overnight.
3. Prepare all the necessary materials for fastening (glue, studs, dowels) and wall processing after fixing the parts (mounting foam, primer, paint).
4. Mark the location of the decorative elements on the facade, the sequence of their fastening, strengthen the dowels in the wall.
5. Check all foam products for cleanliness, drill holes for dowels (it is necessary to ensure that there is no exit to the outer surface).
6. Apply glue to the parts and fix them on the facade.
7. Carefully seal all seams with foam.
8. Prime the surface and cover with paint.

Wet facade on the walls

A large mansion with trees and a fountain - elegant, reliable and durable

Glass fiber reinforced concrete

Fiber-reinforced concrete is a kind of durable stone made of artificial fibers (outwardly resembles a natural stone). Glass fiber reinforced concrete is much stronger and more reliable in operation than the previously considered foam. Architectural products look like a shell up to 25mm thick, which is attached to the surface. Fiberglass concrete is distinguished by the following qualities:

• high strength;
• crack resistance;
• reduced fragility of elements (achieved due to the possibility of minor deformations);
• moisture resistance;
• resistance to sudden temperature changes;
• ease;
• ease of installation.

Decorative plaster will give the wall a unique look

The walls of the house made of facing bricks do not heat up in the heat and retain heat in the winter when frost cracks

A metal roof will last a very long time in all weather conditions.

In spite of big number The advantages of fiberglass concrete, there are several of its disadvantages:

1. Compared to analog materials, the mass is greater.
2. High price.
3. Complex fastening system.
4. The need for accurate installation drawings.

Important! For the development of drawings, it is better to contact specialists who can accurately calculate the location of each component of the glass fiber concrete decor on the facade of the house.

Attention! All work is carried out after the completion of the construction of the walls.

Finishing the facade of the house under the stone is the most popular and successfully raises the status of the owner

Wooden balcony will be a great place to relax

polyurethane foam

The architectural elements of the facade decoration made of polyurethane have the following advantages:

• high strength;
• lightness (especially in comparison with glass fiber reinforced concrete);
• resistance to temperature changes;
• very strong and reliable fixing on the surface;
• no deformation
• the ability to create any patterns without restrictions.

Thanks to the decoration of facades with decorative plaster, any building acquires an elegant and respectable look.

Acrylic siding retains its strength throughout the entire period of operation, does not fade and is resistant to temperature extremes

This type of wall decoration will withstand the effects of precipitation and low temperatures for many years without losing its shape.

Installation can be done without the help of specialists. The main thing is to perform all actions accurately and accurately. The installation sequence is as follows:

1. Thorough cleaning of the facade.
2. Marking the location of the decor elements of their fasteners.
3. Installation of dowels in the designated places.
4. Processing the back surface of all parts fine sandpaper and drilling holes in them for dowels.
5. Primer of all elements (then it is necessary to dry during the day).
6. Attach to wall with adhesive.
7. Fastening with nails.
8. Finishing joints, grouting nail heads.
9. Painting.

Polymer concrete

Products for facade decoration made of polymer concrete are no less popular. They may include the following components:

• quartz sand;
• crushed stone;
• resin.

Its main difference from the materials discussed above is a striking resemblance to natural stone. The products themselves are light in weight and easy to install. According to the sketch, you can order the production of decor of absolutely any shape or size. It all depends on the desire and imagination of the customer.

In addition to facade decoration, polymer concrete is often used to create columns and stair railings.

This insulation technology allows you to give the exterior of the building a unique appearance due to the abundance of decorative paints.

The choice of facade decor

When choosing a material for the manufacture of facades, it is necessary to take into account the general style of the building. The main thing is that the whole finish looks harmonious, there is no congestion.

Experts recommend the horizontal division of the building with the help of decor, when you want to emphasize its solidity. Such kind of fit buildings with few floors. But high house with a short facade it is better to transform with vertical elements.

The combination of decorative elements of different directions in a common plane requires careful preparation and thoughtfulness of the entire composition.

The mustard color of the walls will give a solid look to the building.

Wood siding is an environmentally friendly material that does not corrode.

This type of decoration will give the exterior of the building a unique appearance.

Which architectural decorative elements belong to which type are presented in the table:

Thanks to wet facade on the walls interior spaces no condensation will form

Fiber cement panels withstand the effects of precipitation and low temperatures for many years without losing their shape.

To individual decorative elements include:

1. Stucco. In most cases, it can be made from artificial stone(it is possible to choose a material that is as similar as possible to natural stone), polymer concrete, polystyrene. To create it, light materials are selected.
2. Moldings. This group may include window frames, different type crowns and cornices, window sills, unique in their architecture. They contribute to the original zoning of the building.

The choice of material largely depends on the volume of decorative elements and their location on the facade.

Video: Facade of the house. Finishing materials for home decoration

50 photo ideas for finishing the facade of the house:

What to choose for facing the facade of the house, what material is better, how long will it last, how much does it correspond to the architectural features of the building and interior decoration? Perhaps these are the main issues that the owner of a private house has to solve at the final stage of construction or overhaul, when the time comes to choose materials for finishing the facade of a private house.

Decorating a home is like clothing for a person - it protects and decorates

Facade decoration, as part of the general idea - what to look for

The choice of materials for facade decoration depends on many factors. Of course, there is no universal answer to the question of what is better to veneer the facade of the house. Here are just the main points to consider:

facade is the appearance of the building, forming the impression of its architectural features;

the exterior of the house should organically fit into the general space of the site, taking into account the rest of the buildings and the landscape;

style must be consistent national traditions;

design and materials of external and internal decoration should harmoniously complement each other and work on general idea;

cladding should be carried out using energy-saving technologies.

Installation of insulation is increasingly perceived as an obligatory part of the finishing work.

And the main task, which must be solved - to meet a certain budgetary framework.

style classic

There are such classic finishing materials for the facades of private houses: brick, wood and plaster. They also use natural stone, but tiles from it are expensive, so they often choose a modern analogue - facade porcelain stoneware.

Brick

This finishing material cannot be called cheap in terms of a one-time investment.

Facade decoration can turn a frame house into a brick one

But taking into account the service life of tens of years, the absence of the need to repair the facade and ease of maintenance, the situation is changing to the exact opposite - this is one of the most advantageous species lining. But it also has its own hierarchy:

Facing ceramic brick. The most inexpensive type - the price of a single one starts from 7.60 rubles. and can reach up to 17 rubles. per piece (depending on the manufacturer and the decorative texture of the front surface). The cost of 1 m2 lies in the range of 390-850 rubles.

Hyper pressed brick. The price of one building block is twice as expensive as ceramic bricks, but this type has its own formats, so it is better to compare prices for 1 m2 of half-brick masonry. Relatively inexpensive option will cost 900-950 rubles, with a textured surface - twice as expensive.

Clinker brick. The most durable, but also the most expensive type of facing brick industrial production. If we slightly round the prices, then 1 pc. will cost from 20 to 90 rubles, and 1 m2, respectively, will cost 900-4300 rubles.

Variegated Bavarian clinker brickwork gives the house a special chic

Brick hand molded. Like clinker, it is an elite material. Piece cost from 40 rubles. and higher (there are models more expensive than four times the lower price). But taking into account different formats it is better to quote the price of 1 m2, and it starts from 2100 rubles. and can reach the mark of 14,000 rubles.

The prices shown do not include shipping costs. masonry mortar and work. And if you still carry out insulation, then you need to add the costs for this part (although this stage is common for most facade cladding technologies).

If you choose clinker or hand-molded bricks, then there is an opportunity to save money - choose a domestic manufacturer (lower price thresholds are indicated specifically for him). But the standard of quality is considered to be products from Germany.

And to dispel claims of benefit ceramic tiles brick - price clinker tiles almost does not differ from brick, and the cost of 1 m2 of hand-molded tiles can reach the level of 8000 rubles. And it all depends on the chosen trademark. When choosing a tile, you can save only on the foundation due to the lower weight of the cladding.

The weight of the tile is clearly less than that of the brick

On our website you can find contacts construction companies, which offer the service of finishing and warming houses. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

Therefore, when it is necessary to choose how to clad the facade of the house inexpensively and beautifully, it is better to use domestic facing bricks.

Wood

This material is also in demand for finishing country houses in rustic style, and for modern cottages in today's popular eco-style.

Therefore, all types of facade wooden panels are "in use":

Facade lining. It differs from the interior only in thickness (14 mm and above). The cost of 1 m2 depends on the type of wood, grade and humidity. Inexpensive pine lining of natural humidity costs 170-220 rubles, and larch of the Extra class will cost 1200-1350 rubles. (which is comparable to the cost of domestic clinker bricks). The width of the panel also affects the price of a "area unit" - a narrow lining is cheaper.

Sheathing a house with clapboard is one of the most inexpensive and attractive options.

Imitation of a bar. This is practically the same lining of the “standard” type (with a chamfer), but thicker. The minimum price of 1 m2 of pine grade "BC" is 220 rubles. (with a thickness of 18 mm), and for class "A" and a thickness of 21 mm you will have to pay one and a half times more. A larch panel with a thickness of 20 mm will cost at the level of 800 rubles / m2 (class "AB") and 1400 rubles / m2 (class "Extra").

External differences from the usual facade lining there is practically no imitation of timber

Block house. The difference from lining is a rounded surface “under a log” (imitation of a log house). Pine with a thickness of 27 mm and a width of 135 mm will cost around 300 rubles / m2 (“BC”), a thickness of 45 mm and a width of 230 mm - 650-750 rubles / m2 (“A”). The same larch block house costs an average of 2.5 times more.

Block house imitates the wall of a log house

Planken. Another type of sheathing board, but without fastening between a "thorn-groove". It happens with an oblique and straight profile, and the most characteristic difference is the gap between the panels. It costs approximately the same as an imitation of a bar.

Planken fits perfectly into modern architectural style

Plaster

This is the most inexpensive type of facade decoration. But even here there are "economy" and "extra" classes:

Mineral facade plaster based on cement, lime and mixtures thereof. The simplest type of leveling plaster costs from 220-250 rubles. per bag of dry mix weighing 25 kg. At a consumption rate of about 12-15 kg per 1 m2 (with a layer thickness of 10 mm), it is necessary to spend only 110-120 rubles per "area unit". Plus primer, work and facade paint.

An example of finishing with mineral facade plaster

Mineral decorative plaster. If you plaster in two layers - the main and decorative, then they also use plaster such as "fur coat", "bark beetle" or "pebble". A bag of 25 kg costs - 360-800 rubles, but due to the thin layer, the consumption is less - from 2.5 kg to 4 kg per 1 m2, and this will increase the price by another 60-120 rubles / m2. In total, about 250-400 rubles / m2 should be spent on all materials for inexpensive finishing of the facade of a house made of mineral plaster. But these are prices. domestic manufacturers, "foreign" decorative plaster can cost at least 3 times more.

Plaster with the effect of "bark beetle" is always in stock with any type of binder

Acrylic plaster. Sold in finished form or diluted to the desired consistency with water. Consumption from 1.5 to 3.5 kg/m2 (the thinnest layers can even be applied with a spray gun). Depending on the weight of the packaging, 1 kg of domestic plaster costs 70-90 rubles. Taking into account the expense, the cost of materials finishing lies in the range of 100-300 rubles / m2. Plus, you need to add the cost of a leveling layer of mineral plaster, primer, work and paint.

Acrylic facade plaster looks good not only in one color, but also with their combination

silicate plaster. Ceresite per kilogram costs 100-120 rubles, which, at a consumption rate of 3-3.5 kg / m2, determines the cost of finishing coating materials at the level of 300-400 rubles / m2 (but this is not a purely silicate binder, but in combination with silicone resins ). And it is more expensive than finishing with acrylic plaster. If you choose a mixture of imported production, then the cost of finishing doubles.

Silicate plaster with a rough surface is not afraid of temperature changes and high humidity

Silicone plaster. If you do not take into account the "hybrid" Ceresite and mixtures with a binder in combination with acrylic polymers, then in its pure form the most inexpensive facade silicone plaster in terms of a kilogram costs at least 150 rubles, and on average - about 200 rubles. Consumption, like the rest decorative coatings, depends on the grain size of the filler (layer thickness), and can range from 2.5 to 4 kg/m2. Therefore, this type is the most expensive - the cost of the finishing coating is 350-800 rubles / m2, and this is already comparable to the price of facing with domestic ceramic bricks.

The colors and textures of silicone plaster allow you to choose it for any artistic design.

Siding

This is the general name for a whole group of materials that differ in the material of manufacture and performance characteristics. Many factors influence the formation of prices, and the spread of prices even in one category is very large. Therefore, the statement about the low cost of this type of finish is not entirely correct. Although there is a certain hierarchy here, and the question arises of how to finish the facade from the presented types of siding:

Vinyl wall siding. The price of products of a domestic manufacturer starts from 165 rubles / m2 and reaches 500 rubles / m2 (and this is with the same thickness of 1.1 mm). For imported siding, you will have to pay twice as much - up to 1000 rubles / m2.

Vinyl siding - inexpensive and aesthetically pleasing

Vinyl plinth siding. It differs from the wall one in greater thickness and high mechanical strength. Therefore, for domestic manufacturers, the price starts from 470 rubles / m2 and reaches 1300 rubles / m2. To buy imported siding, you have to pay 1000-2000 rubles. more.

Visually about vinyl siding, see the video:

Metal siding. In terms of price, it doesn't cost much more than vinyl wall siding. Moreover, the cost is affected not so much by the origin as by the thickness of the metal and the type of coating. But in any case, the price difference is not so significant. For example, domestic siding 0.4 mm thick coated with polyester costs from 260 rubles/m2, and Finnish siding 0.5 mm thick covered with pural will cost 800 rubles/m2.

Metal siding can be made in many textures, including wood grain. Video example:

Fiber cement siding and WPC sheathing(wood-polymer composite). Approximately the same cost materials - 1000-2000 rubles / m2. main reason high cost - import. But when compared with foreign vinyl basement siding, then this is the same price category.

WPC siding does not visually differ from planken natural wood but will last much longer.

If the task is to finish the facade of the house inexpensively, then domestic-made vinyl or steel siding is part of hinged facade- most best option. Although here it will also be necessary additional expenses for accessories (up to 30% of the cost of the panels).

Conclusion

The most popular species facade finishing. In principle, in each category there are options that allow you to meet 500 rubles. at the cost of materials square meter. And you just need to decide which one best suits the architecture of the house, landscape and interior decoration.

How to make a house facade: finishing options

The question of how to make the facade of the house, and make it unique, beautiful and practical at the same time, is very important. It is almost impossible to overestimate it, because it is the facade that determines the appearance of any house.

The very first impression of the house and its owner will be determined by the successful selection of finishing materials. In addition, high-quality performance of all facing works is important. Facade works related to outdoor work. Therefore, they should be performed after completing the main construction works with walls and roofs.

Beautiful facade of the house

It is not difficult to do the cladding of the facade of your house yourself, with your own hands. The main thing in this matter is knowing what to do and how. Well, some building skills must also be present.

Attention: It is worth deciding what is more important for you - time or money. Do it yourself - save money, trust the experts - save time.

So, the walls are removed, the roof is mounted, the main concern of the owner of the building is the task - how to make the facade of the house. I want the house to look original, unique and that all the details of the facade are in harmony with each other.

There are many ways to finish the facade, as well as ways to achieve your goals. And one of these ways is to use different options for facade cladding.

There are many cladding options. And the owner of the house is faced with an important question: what to make the facade of the house from. Most often, facade decoration is necessary in cases where the house is built of brick or cellular concrete.

Frame houses require facade finishing. If the house is wooden, then the facade is rarely finished. Wood is not the material that needs refining.

So: how to make the facade of the house?

Types of facade decoration

ceramic brick

Cladding with ceramic bricks

It is difficult to name such an area of ​​construction, wherever ceramic bricks are used.

In its manufacture, a special technology is used, thanks to which it receives serious advantages:

1. Frost resistance. which is very important for our climatic conditions.
2. Durable. The service life is calculated in decades.
3. Capable of removing harmful substances. Property of interest: the unique ability to remove harmful substances that environment.
   Rainwater promotes self-cleaning of facing bricks on the facade of the building.
4. The facing brick possesses durability and stability. atmospheric, short-term mechanical influences do not cause any change in appearance bricks.
5. The presence of a variety of colors and different textures.

Clinker tiles

Finishing with clinker tiles

It may happen that facing ceramic brick for the facade of the house becomes too expensive. Among the materials for facade cladding, there is something to replace it, but at the same time, the facade will look like a brick one. Such a substitute is clinker tiles.

She is able to imitate a brick, while repeating its shape, size and color. Everything is exactly the same, except for the thickness. It has all the advantages of a brick, plus it can be considered that the tile is very convenient in transportation and installation. The configuration of the inner side allows you to firmly connect it to any surface.

Stone: natural or artificial

Artificial stone on the facade

The facade can also be finished with natural stone. But it refers to expensive materials and besides, it is heavy and not very convenient to handle. For this reason, the stone was also replaced in the form of an artificial finishing stone.

And the very concept of "artificial" refers only to the fact that it is involved in its creation. human technology rather than natural phenomena.

All components of this material are absolutely safe for humans, environmentally friendly material.

Cladding with fiberglass panels

Fiberglass panels that mimic natural stone, began to be used not very long ago.

Their advantages include the following properties:

1. Lightweight and easy to install.
2. High aesthetics - natural stone is reproduced in all details.
3. Fast finishing work. This greatly reduces labor costs.
4. Fiberglass panels are able to imitate almost all types of natural stones.
5. Resistant to temperature changes, resist atmospheric influences, are not affected by fungi and mold.
6. Do not lose color under the influence of ultraviolet rays.
7. High strength characteristics.
8. During years are able to retain their properties.

siding finish

Benefits of vinyl siding

Finishing the facade of the house with siding is one of the easy, simple and economical ways of facing the facade. With the help of siding, both the alteration of the facade of the house and the creation of the facade during the construction of a new building can be carried out.

Among its advantages:

1. Relatively lower price per unit area.
2. Fast and convenient installation.
3. Serves as a reliable protection against external aggressive manifestations.
4. Does not create additional load on the walls and on the foundation.
5. It has high aesthetic qualities.

Attention: When purchasing siding, pay attention to the fact that it is from the same batch of production and make a certain reserve. Otherwise, you can not get into the shade.

The siding can have both a polymeric covering, and a paint and varnish. Polymer - more durable.

Siding is mounted very simply, so it is quite possible to do it yourself without involving expensive specialists. Moreover, the installation instructions do not look complicated. One has only to answer the question: what is the best way to make the facade of the house: vinyl siding or metal.

They have common positive traits, but there are differences. In both cases, preliminary alignment of the walls is not required. They have many colors and shades.

Metal siding is non-combustible, withstands severe temperature changes, and has a service life of more than 50 years. Among the disadvantages are the relatively high cost, dents after impacts and the rather large weight of the facade.

Reliability of metal siding

Vinyl siding is particularly lightweight, and for this reason it can be mounted without resorting to outside help. It does not fade in the sun and attracts buyers with a lower price.

The choice of material for the facade is not a very simple matter. The presented photos and materials can help in this choice. Undoubtedly, you will be proud of the facade of your house.

On demand " finishing photo domestic houses » found 12216 a photo

Photo Interior Finishing Houses

House design inside. 200+ photos.

Home interior design needs to be taken seriously.

It is important that the chosen style makes it cozy and harmonious. How to choose the style of the interior of the house? In order not to make a mistake when choosing an interior style, you need to decide on the answer to some questions. What interior style do you like and think is the closest? What should be the color scheme of the premises? How many people will live in the house, their age and hobbies?

What functional areas would you like to see in the house? The answers to these questions will help the interior designer most accurately choose the style and create the interior of the house, in which all family members will feel comfortable. recipe with photo French meat with potatoes in the oven

The cost of a home interior design project. The area of ​​the object. Up to 100 m2. 101 - 200 m2. 201 - 400 m2.

401 - 600 m 2. 601 - 800 m 2. 801 - 1000 m 2. From 1001 m 2. Working drawings. 2000 rub. / m 2.

1900 rub. / m 2. 1800 rub. / m 2. 1700 rub. / m 2. 1600 rub. / m 2. 1500 rub.

/ m 2. 1400 rub. /m 2. Three-dimensional visualization.

Gift. Gift. Gift. Gift. Gift. Gift. Selection of materials. +300 rub beautiful make-up photo step by step.

/ m 2. +300 rubles. / m 2. +300 rubles. / m 2. +300 rubles. / m 2. +300 rubles. / m 2.

300 rub. / m 2.

Finishing the facade of the house with your own hands - from what and how

300 rub. / m 2. Complete interior design project. 2300 1600 rub. / m 2. 2200 1500 rub. / m 2. 2100 1400 rub. / m 2.

2000 1300 rub. / m 2. 1900 1200 rub.

/ m 2. 1800 1100 rub. / m 2. 1700 1000 rub. / m 2. The minimum cost of the contract: happy birthday greetings to a man beautiful pictures 150,000 rubles. Advance payment: 5000 rub. The discount for the full design project is valid until July 1st. How to get an additional 10% discount?

The complete design project includes all working drawings, three-dimensional visualization of all rooms and selection of all materials.

Order a design project. View the contract for the development of an interior design project. House design inside.

Photo from portfolio. Nothing was found matching your criteria. Design of the house inside the house at the address mo, p. Korenevo, kp pearl korenevo, 207 sq. M. 64 photos. 64 photos 64 photos 64 photos 64 photos 64 photos.

Design of the house inside the house at vil. Filino, dnp woodland, pos. Nikolsky lakes, 160 sq. M. 50 photos. 50 photos 50 photos 50 photos 50 photos 50 photos. house design inside the house at mo, Istra district, kp park avenue, 335 sq. M. 90 photos. 90 photos 90 photos 90 photos 90 photos 90 photos.

House design inside the house at mo, pos.

Meshcherino, southern valley, 250 sq. M. 52 photos. 52 photos 52 photos 52 photos 52 photos 52 photos. Show more show all photos. Renovation of a private house inside. The specialists of the foundation group of companies will not only develop a competent design project for the interior of the house with detailed 3d visualization, but also implement it on a turnkey basis in as soon as possible actually high level with three-stage quality control.

There are many options for interior decoration of the house. Conventionally, they are divided into three large classes: Redecorating, which involves easy updating of the interior, painting or wallpapering, updating walls, floors and ceilings, without rough and capital works; overhaul, with the demolition and erection of walls, electrical alteration, new flooring, full-fledged roughing and finishing work, laying the necessary communications; business class repair, involving major repairs using complex modern materials, the latest technologies and innovations in engineering.

Interior decoration of the house.

Interior design ideas. Wall decoration inside the house can be either complete or partial, which implies some design styles. For wall decoration, they now use mainly decorative plaster, modern wallpaper, all kinds of panels and cladding. For home interior decor classical style use frescoes, pilasters, stucco, friezes and moldings.

In modern creative interiors of houses, wall painting, wood trim, clinker brick and stone decoration.

An equally important element of decor in the house is the floor. It can be laid out in a single color, combined or mosaic tiles, as well as various options parquet. In addition, today there are many modern solutions, for example, self-leveling floors or microcement floors, which are perfect for home and cottage design in trendy styles such as loft, techno, avant-garde, Mediterranean and others.

If the emphasis in the interior is on the walls, then the floor should be decorated in neutral or light colors. If a solid light color scheme was chosen for the walls, contrasting options may be suitable for decorating the floor, for example, black and white floors or floors with metlakh tiles, as well as artistic parquet.

Country house interior styles.

The interior design style of a house is determined not only by its design features, but by the general preferences of all family members living in it, reflecting their character and hobbies. The design of the house inside is better to create, adhering to any chosen style. The design of the house in a classic style will create a feeling of harmony and comfort. Such an interior will always be relevant, because the classics, like " black dress» never goes out of fashion. The interior design option in ethnic style is suitable for lovers of travel and a free lifestyle.

In such an interior, much attention is paid to small objects, elaboration of details and color solution. Modern styles such as loft, minimalism, avant-garde, contemporary will appeal to young couples and creative families.

For older couples with children, cozy and thoughtful styles, such as Provence, Scandinavian, Art Deco and Neoclassic, are suitable. The interior in eco, country or bungalow style is suitable for decorating the home of nature lovers and natural materials.

The designers of the foundation group of companies can offer many more options for the interior design of suburban private houses - the choice is always up to the client.

Contact for design decision your home to the professionals of our studio!

Construction »Finish» Articles »Where to start interior decoration at home

Why start home decorating?

Before you start decorating your home, you should at least think about how much work you expect.

Of course, if you don't finish the first time, then the work will be much less than if you finished in a new house.

Here is a short list of templates that will help answer the question - where to start the interior decoration of the house:

• it is advisable to start the interior decoration of the house from the furthest from the entrance to the rooms, not to take it immediately for all rooms;
• In the process of painting or masking a surface, remember that it is best to do it from top to bottom;
• Areas that don't need embellishments are best covered so they don't need to be cleaned.

It is best to carry out internal processing only if all work is completed when installing load-bearing partitions and accessories.

All doors, windows and windows must also be installed. Take Special attention selection of tools to help you get the job done.

How to make a house front: installation guide, price, photo

You will need the following kit: screwdrivers, drops, spatula, hammer, level, tape measure, electric drilling machine, reamer and wood, as well as some other tools, it all depends on the type of finish.

Leave ahead of time to think about where your home will be the outlet, all the water, and the switches.

Internal Finishing work must be performed on flat surfaces, so it is sometimes convenient to use gypsum boards to make any surface a right plane. This will make the end much easier. For correct installation such drywall constructions you will also get a special mounting profile.

A recorded drywall plate can be repaired at special adhesives but it is a complex process. Drywall will help you store finished materials.

When drywall sheets are installed, it is important to seal the seams between them tightly, which is done with ordinary putty. After that, you only need the colors of the wall in desired color, or insert wallpaper.

There is another general way wall decoration - the use of PVC panels.

Thanks to these panels, you do not need to deal with additional procedures on the walls, you can forget the background and color. The joints of these plates are sealed with special plates that always come with the plates themselves.

Soil preparation is carried out using various screeds and mixtures that are self-levelling. When the mixture is drained, only the laminate remains on the floor, but of course you can use any other flooring.

Installation of laminate flooring does not take much time, and the material is reliable and worthy of the aesthetic appearance.

wall decoration

Wall alignment

wall decoration

Internal and external finishing is made with spacers and house interiors.

Wooden cladding is extremely popular in suburban housing construction. What will be discussed:

• about finishing technology;
• how to cover the walls and ceiling with the pedestal itself;
• from the cost of completing the work.

Working with wooden substrates as finishing material is not such a difficult process, so any more or less qualified carpenter can solve it.

To be able to cover.

Wall rooms. When decorating the walls inside the room, the position of the panel can be vertical or horizontal, which greatly affects the visual effect of the room. Panels installed horizontally will visually make the room look longer and more vertical - shrink the space but make it "higher".

Ceilings. Underlayment is a widely used material for embedding ceilings in wood, not just houses.

The front of the building is often often trimmed with this material.

Wood lining - what building material is it?

Designed - The planned trip is about two inches thick (usually less than 1.2-1.5 cm), which is used primarily for indoor internal walls and ceilings, and is often located in outer houses finishing (mostly) houses. For the outside end, and the so-called "street" is often used, so it's only two inches thicker, and the outside fits perfectly.

Phases and technologies.

Before using the finishing panel, it must lie indoors for at least one day, the packaging must be removed.

This is done to equalize the humidity of the room and wood. After that, you can continue working. The first phase requires the preparation of the wall.

Some ideas about transforming the facade of a house

If the wall is smooth, the lining can be fixed directly on it, if it is not installed - install the so-called. Beacons, their roles will have wooden rods of the desired section, located at the level, but perpendicular to the chosen direction.

If necessary, the resulting precipitate is insulated and sealed by water vapor resistance.

The padding must then be cut into the boards that are needed and attached to the finished box. After completion of work, the panels can be covered with tonic compositions or varnishes.

As you can see, this is a simple process, it can be easily managed without the participation of experts.

In the same case, if you do not have the desire or ability to complete yourself, our services can be used.

It will be difficult for you to stop, but everything will be done efficiently and professionally.

If this page of our site was useful to you, share it with your friends and acquaintances:

Kitchen. wall decoration

Wall closure due to the specifics of this room should be scheduled for regular wet cleaning. The most common wall decoration in private houses and apartments is the white washing of the upper part of the walls with chalk while painting the lower part of the walls ( Oil paint) with oil paint.

The upper part of the walls can be painted with paint on water based. If you choose kitchen glue, it is recommended to use a damp and film-resistant background. But during this time, the usual background is very good quality, which can play the role of washing - you can wipe them off with a towel without any damage. Recently, many have started using extruded polystyrene tiles to complete kitchen walls.

As with other materials used to fill the walls of a room, this method has both pros and cons. We will talk about them in the corresponding chapter. Good view to the kitchen and wooden walls.

And the walls, clad in wood, are completely washed away and seem to heat up in a room where the walls are covered with wooden strips. However, with this version of the kitchen part is somewhat reduced. And finally, tiles. There is no better finishing material than a kitchen worktop tile that contains all the kitchen utensils.

You can, of course, if you want, and the ability to cover all the walls of the kitchen. Typically owners use combined options for finishing kitchen walls, each one chooses their own. On the kitchen wall almost everything is tiled; if there is an angular version of the location kitchen equipment, 2 walls are tiled. The remaining walls - depending on the aesthetic needs and financial capabilities of the owner: chalk, paint, wallpaper, extruded tiles, wood.

The range, as you can see, is quite wide.