Finishing the walls, ceiling of the dressing room, its interior (photo above) is a responsible matter that requires a competent approach. The dressing room refers to a multifunctional room where all clothes remain, in which there should not be high temperature, but be warm enough to relax, cool down, drink hot tea after the steam room.
It is better to enter the bathhouse from the south side so that the snow melts faster and the door is less likely to be covered with snow.
The dressing room serves as an obstacle to the entry of cold air into the steam room and must retain heat inside the room, which is why the windows and doors are small in size. The door from the dressing room to the steam room is opened inside the dressing room, which protects clothes from excess moisture.
The area of the dressing room can be different sizes, usually no more than 6 m². How to decorate a dressing room and does it need to be insulated?
The usual items in this room are hangers, a bench, there can be a table and a shelf in the corner as a means of additional hygiene. Refrigerator and TV too great choice, but one can only dream about this, and for many these delights are inaccessible.
Why focus on the worst, thoughts are material, and we only need the best.
Selection of materials or what they offer
The important point, as presented in the video, is to create a relaxing, comfortable and pleasant atmosphere inside the room for long conversations with friends. Preference is given to the traditional, original Russian style of finishing the bathhouse.
Deciduous wood (birch, linden, aspen) and coniferous (spruce, pine, fir), the presence of a samovar, spoon, matryoshka, drying bag, bagel.
The waiting room must meet certain requirements:
- A well-insulated space that does not allow through wind.
- The optimal room size is 140x230 cm.
- One visitor should be located in an area of just over a meter to feel comfortable.
- An important role in the dressing room is given to lighting; the window is not placed too low, and it is not customary to curtain them. Preference is given to artificial lighting.
Attention: The dressing room is arranged with shelves for shoes, with comfortable seats; if the bathhouse is heated with coal, you need a special box with a lid and a space around the box that is convenient for cleaning.
Materials for finishing a dressing room are not as important as when finishing a steam room or sink (see Interior finishing of a bathhouse sink using different materials); panels from coniferous trees, for example pine panels. The temperature in the dressing room is low and there is no need to worry about resin discharge.
You can order the finishing of the dressing room to specialists, but there is a second option, doing the work yourself, which is much preferable, and the price is lower, and the savings have never hurt anyone. Pine panels emit a pleasant aroma that has the smell of pine needles and has a beneficial effect on the human body.
Instructions for performing panel installation work are provided below:
- Work on wall insulation is carried out first.
- Mineral wool or foam plastic are used as insulation, which retain heat well and are much cheaper than other materials.
- Mineral wool is fixed to the walls and ceiling with wooden slats.
- The foam is fixed special fastenings to the ceiling and walls or inserted into the voids of the finished frame (sheathing), precisely cut to size.
- The frame (lathing) for pine panels is made wooden beams and fits exactly construction level dowels.
- Pine panels are secured with ordinary nails or self-tapping screws.
A little about the floors in the waiting room
Agree that it is unpleasant to step on a cold, not necessarily concrete, floor with warm feet. Selecting the right materials for a dressing room is not as easy as it seems.
The dressing room is a place where people run out in negligee, and from which moisture gets onto the floor, spreading through the holes and cracks. It refers to a space where there is high humidity and evaporation.
The floor surface should be comfortable, warm, non-slippery when wet, and promote health.
Since ancient times, bath procedures have been considered one of the most effective ways maintaining excellent health and even treating certain diseases, which is why baths are widely valued all over the world. The article will discuss how the dressing room is finished when building your own bathhouse.
The dressing room is the face of the bathhouse
Naturally, the fundamental room in the bathhouse is the steam room, since the condition of the bathhouse visitors depends on its functionality, efficiency and safety. But the bathhouse does not end with a stove, steam and a broom, and you can complete the pleasure of the procedures by visiting a comfortable relaxation room. The dressing room usually serves as the main recreation area.
It may seem to some that it houses only a locker room, but in fact it can be turned into a spacious room with space for comfortable sofas, chairs, table. Also, a table for brewing tea will fit perfectly into the interior of the dressing room. Later in the article, the process of decorating a dressing room in your own bathhouse will be described in more detail.
Functional purpose of the dressing room
Main functional purpose the dressing room is to protect the steam compartment from the penetration of cold air masses into it. However, today the bathhouse is not just useful procedures, but also one of the best ways pastime.
Accordingly, the arrangement of the dressing room should be aimed at expanding functionality: comfortable seats for relaxation, a table for several people and what is most needed is an area for brewing delicious tea, which will complement the positive feelings from the procedures performed.
The locker room can be designed either in an open type or in the form of comfortable lockers in which several visitors can place their belongings at once. A chest of drawers can be installed nearby for various accessories and personal items.
You can create light in the dressing room using electric lighting devices, but natural light is better sunlight nothing can happen. Accordingly, the most extensive windows will be very useful and effective in increasing the level of illumination inside the dressing room.
But it is worth remembering that windows are one of the main structural elements, causing heat leakage from the dressing room and the bathhouse as a whole. It would be wisest to use double-glazed windows that meet all the required criteria regarding quality windows. But also double wooden frame will cope with the protection of the dressing room no worse.
It is important to consider thermal insulation finishing premises, since this will balance the temperature difference between the steam room and the dressing room. If you plan to use a sauna all year round, then you can install an electric fireplace in the dressing room. If the room has sufficient space, you can additionally install a massage table or a large soft sofa in it.
Features of the interior design of the dressing room
Decorating the interior of a dressing room in a bathhouse does not require any frills if we are talking about chopped wooden bath(read: " "). The main task when finishing a log house from the inside is its thermal insulation and the treatment of wood with various impregnating compounds that extend the maximum service life of the material. If we are talking about finishing old buildings, brick buildings etc., then the dressing room needs to not only be improved functionally, but also its decorative design needs to be updated.
It is worth saying that the amount of materials used in finishing the dressing room is limited due to the high humidity inside the bathhouse. However, this does not prevent you from creating a high-quality design for the dressing room, which will look original in the photo and upon visual inspection.
The wealth of color and texture solutions will allow you to easily create a design in the waiting room that matches any modern or classic style. You can choose the most harmonious combination colors, or vice versa, use the method of contrasts. Also, the design of the dressing room can be improved with decorative elements and accessories familiar to residential premises.
Optimal materials for finishing work
The tile must have optimal strength characteristics, and also easily withstand temperature changes, which are simply inevitable in a dressing room (more details: " "). Special surfaces without a slip effect will be very practical and will increase the level of safety in the room.
We can say for sure that it is impossible to decorate the inside of the dressing room, and to be more precise, it is unsafe. We are talking about various synthetic floor coverings And facing materials: laminate, linoleum, etc. The reason for this is their intolerance to high humidity and the tendency to secrete various substances harmful to the human body.
When it comes to how to arrange a dressing room, every specialist will confidently call wood the best material. It can withstand the most extreme operating conditions, and will also create a microclimate in the dressing room that is beneficial for the human body. Also, the wood looks original in the photo and upon visual inspection, which allows it to be combined with any finishing materials.
Polyvinyl chloride wall panels for dressing room decoration
PVC is one of the most practical and cheapest materials sold in a large color palette, which allows minimum costs decorate a beautiful dressing room with a certain style. Another advantage of this material is its ease of installation. The work of installing it is within the capabilities of every person with a basic set of construction skills.
On level wooden walls such panels can be mounted without using a special frame. The work uses specialized fittings and guides that hide the joints between the panels. To the right size the material is cut using a sharply sharpened construction knife.
It is only worth noting that, like any plastic material, it cannot be mounted on heated walls separating the dressing room from the steam room.
What is rubber paint
This material was introduced to the construction market relatively recently, but has already gained high popularity. Given paint material is universal and can be applied to almost any surface in rooms with high humidity conditions. When the paint hardens, an elastic layer is formed that is resistant to stress, cracking and peeling during use.
No way preliminary work There is no need to prepare the coating for applying rubber paint. You can limit yourself to only the simplest leveling of defects and cleaning from dust, dirt, stains, etc. If necessary, the surface should be strengthened special compounds deep penetration.
Rubber paint can be applied like regular paint using paint brush or roller. Spacious rooms can be easily processed using a spray gun (paint gun).
Facing block house in the dressing room
A block house is a type of lining that imitates the texture of a log wall. The material shows its best qualities in spacious rooms. Most effective decor the dressing room becomes proportional to the increase in the radius of its curvature. The width of one panel can be from 90 to 260 centimeters.
When installing the material, it is necessary to take into account that the block house is attached to the sheathing. During installation, it is necessary to take into account that the total thickness of the structure will collectively take the value of the thickness of the sheathing beams and the panels themselves (1.3-5 centimeters).
The disadvantage of the material is that the panels are difficult to join in the corners of the dressing room. It is necessary to adjust the parts for laying them in this part of the room using a jigsaw. Cutting panels at an angle of 45 degrees is an accessible technology, but not always advisable. It is best to entrust this work to professionals, since without experience it is almost impossible to join panels in the corners of the room.
The main difficulties arise when installing such elements electrical system rooms, such as sockets and switches. It is inconvenient to treat those areas of the room where the panels meet window and door blocks.
During installation electrical wiring allowed to lay it down open method. Electric wire You can attach it to the block house using metal brackets or lay it in a cable channel.
Lining is the most popular finishing material
This material has proven itself with the best side, since there are three main categories A, B and C, which leads to a wide price range. Accordingly, each owner will be able to choose for himself optimal material. The lining is laid horizontally, which provides maximum moisture protection, preventing liquid from penetrating into the joints between the boards.
The lining is made from natural wood of various species. The thickness of one board can reach from 1.1 to 2.2 centimeters. The most popular options for covering a dressing room are those with a thickness of 1.4 and 1.6 centimeters. The lining can be installed on a flat base without sheathing. If in promotions increased level humidity, then lathing is required. The step between vertical slats should be from 0.6 to 1 meter.
The board of the material has a special groove and tenon, which allows installation of the flooring very simply and with the maximum level of joining of the boards. Most quality look The material is eurolining, manufactured according to European standards. Special milling channels are applied to the back side of the boards, which allow the floors to be effectively ventilated from moisture.
Types of wood used in finishing the dressing room
Naturally, the most common and best-studied material for finishing dressing rooms is wood. Exists large number its types, which are selected taking into account positive characteristics and characteristics of each breed.
Today on the construction market you can choose the following types wood materials:
- Oak. The same type of wood that matches the main operational requirements. It is characterized by the following positive qualities: high mechanical strength, water resistance and maximum long term operation. Oak wood releases phytoncides, useful substances for the human body. From the medical side of the issue, oak is useful in that its smell leads to a decrease in blood pressure and tones the blood vessels of the brain.
- Abash. This is deciduous wood African tree, characterized by low heat capacity, solid structure and low mass. When used, abashe wood retains its properties for a very long time. appearance. There are no knots on the surface, which makes it possible to avoid processing the material before installation. None healing properties there is no such wood.
- Canadian cedar. Interesting wood species high humidity, resistance to temperature changes and fire resistance. The strength of the material is high and during operation it does not lose its positive qualities. Heating Canadian cedar releases essential oils with beneficial antibacterial properties. These substances have a particularly good effect on the immune system and for eliminating diseases of the respiratory system.
- Linden. Boards made from this species are very different beautiful texture and color, as well as a high degree of moisture and sound absorption. It is very simple to process linden boards, and in extreme temperature and humidity conditions they do not change their level at all. technical characteristics. Besides pleasant smell linden wood releases into the air useful substances that have a positive impact on work nervous system. People staying in dressing rooms lined with linden wood experience a general uplift in mood, a surge of vitality, etc.
- Aspen. Home distinctive feature Aspen lining is absolute moisture resistance and increased strength of monolithic boards. Under mechanical load, aspen products do not deform; they can be easily processed and installed. In its pure form, wood may lose its color during use, but special means for treatment will help quickly return the coating to pleasant light colors with a greenish tint. Aspen has approximately the same effect on the human body as linden.
- Larch. The strength of lining made from such wood exceeds the values characteristic of oak and pine, which makes its processing extremely difficult. The service life of such wood can reach a whole century, and as a bonus to all technical qualities the aesthetic appearance of honey-colored boards is added. Inhaling the substances released by such wood is considered an excellent prevention of any colds. It also turns out positive effect for people suffering from hypertension.
- Pine. One of the most durable types of wood, which in its main characteristics is comparable to oak. It is worth highlighting its main drawback, which is the release of resins when heated. The heated resin itself can cause burns upon contact with the human body. It is best to cover with pine boards only those areas of the dressing room that would be difficult for a person to reach. The substances released by coniferous trees have bactericidal properties and are very useful in the fight against various respiratory diseases. Also highlighted essential oils, increasing general level protective properties immune system, etc.
Bottom line
The article describes in detail the main features and nuances of how to decorate a dressing room on your own. If you follow finishing recommendations and use quality materials, then you can get cozy place, in which the effectiveness of the adopted bath procedures will only increase.
All installation work can be entrusted to specialists who will take responsibility for all stages - from procurement necessary materials(at the request of the customer) before their installation and commissioning of the waiting room.
The dressing room is the second most important place in the bathhouse after the steam room. Here a person rests and how comfortably he is furnished will depend good mood. Finishing the dressing room is a crucial moment; here you need to take into account many nuances, from the right choice of materials to interior design.
The main, but not the only function of the dressing room is to prevent cold street air from entering the steam room. In addition, it serves as a storage place for bath utensils, and if space allows, then for a certain supply of firewood.
To relax after the bath procedures in a good and comfortable way, again, you cannot do without a dressing room with installed benches, a table and clothes hangers.
Material for interior decoration of the dressing room: selection rules
The dressing room is not a simple room and has special requirements. And it is these that you should focus on when starting finishing. The slightest mistake can reduce the quality of the effect of bath procedures and reduce the service life of the bath as a whole. More frequent repairs will be required.
Requirements:
- The width of the room should not be less than 1 m, and per visitor there should be from 1.3 square meters squares;
- The design of the dressing room begins with its insulation and lining to prevent the occurrence of through wind;
- The room should have good natural light, the windows can be wide. But it is worth doing them as much as possible. This will allow you to avoid hanging curtains to create a private environment. And it will prevent the air from cooling at floor level;
- The interior of the room must include benches or sofas, and, if possible, a table. You can’t do without a closet or several hangers.
Pay attention!
If the dressing area is small, then it is better to choose wood as the material for furniture.
As a last resort, a sofa will do made of leatherette.
Interior items made of fabric will not last long due to high humidity.
What material is suitable for finishing the dressing room?
The design of the dressing room begins with the choice of finishing materials, and this is not so easy to do. The room is exposed to moisture for a long time, but must remain warm, so tiles not acceptable to him. It gives a feeling of coolness, which is inappropriate here.
Traditionally wood was used various breeds. Paint treatment is undesirable - naturalness is the basis of the bath interior.
It is not only beautiful, but also practical:
- wood has an attractive appearance;
- This warm material– it heats up quickly and maintains the desired temperature level for a long time;
- a pleasant aroma has a beneficial effect on human health;
- properly selected wood does not rot for a long time without additional processing.
How and how to decorate the dressing room - preference should be given to hardwood, as it is more durable and dense in structure - linden, aspen, birch, alder.
Conifers - pine or spruce will have to be treated with water-repellent, odorless paint, which is absorbed into the thickness of the tree. As finishing material suitable - planed logs, lining, tongue and groove boards.
Special attention is given to gender. It is made waterproof and non-slip by dry wide boards. Porcelain tiles are less common, but you can only walk on this floor with special shoes - it is not too warm.
How to decorate a dressing room
Finishing is not limited to a set of technical actions for insulation and wall covering. To make it pleasant to relax in and convenient to care for the bathhouse, the interior of the dressing room is thought out to the smallest detail. Traditionally for interior design use the style of a Russian bath - it creates special atmosphere and comfort.
The walls are lined with clapboard - the direction is not of fundamental importance. It can be vertical, horizontal and even oblique.
The ceiling is covered with boards with a mandatory vapor barrier underneath. But this is not all; it is not enough to comply with all the rules and regulations. We also need to arrange the situation.
Furnishing the premises
If the room is small, then you can limit yourself to a few stools and clothes hangers, but you shouldn’t forget about the aesthetic component - it’s good to hang thematic paintings, brooms, and bath paraphernalia on the walls.
When the area of the room exceeds minimum dimensions, then turning around in the design will not be difficult. It’s interesting to create unusual and beautiful interior. The choice of furniture should be done at the stage of construction of the bathhouse. These can be large sofas with faux leather trim, wooden benches or chairs.
The furnishings of the room should be ergonomic and functional. Before you sheathe the dressing room, you need to decide on the style, perhaps more suitable finish timber with imitation logs.
All elements of the environment are subject to certain requirements:
- safety from fire - sufficient distance from the furnace firebox; if this is excluded, then cover the area nearby with metal to protect against sparks;
- environmental friendliness of all materials - exclude plastic from the interior;
- compliance with the chosen design direction to create harmony.
Organization of the dressing room includes the presence structural parts– a closet, bedside tables or even a sideboard for dishes, if cooking and eating food is expected there.
If you move away from the classics and add a little luxury, then furniture with curved legs and carved backs will come in handy. Decorating a dressing room, if done in compliance with all requirements, will be a pleasant experience. Instructions for many decorative material allows their installation in the bathhouse.
Conclusion
The design of the dressing room begins with its lining and insulation. This cannot be avoided even if the walls are built from thick logs 200 mm in diameter.
The interior decoration of the room is to create a comfortable environment combined with practicality - non-slip warm floors, walls and ceiling made of natural breathable wood. The video in this article will tell you in detail about the process and types of dressing room finishing.
The dream of every summer resident and owner of his own private house is to build a bathhouse on his own site. Baths may differ in design, material, size and many parameters, but they always have one thing in common - there is no bath without a dressing room.
The theater begins with a hanger, and the bathhouse begins with a dressing room. Here they not only undress and leave their clothes, but also relax between steam baths, drink tea or cold kvass at the carved wooden table with comfortable benches.
What is a waiting room for?
The dressing room is built in such a way that moisture from the steam room does not penetrate into it and the clothes remain dry. Light should penetrate into the dressing room, but not cold air
, so the window is made small. Exterior door It should also be low, retaining heat as much as possible. Regular front door has a height of 2 meters, and the door to the dressing room rarely exceeds 160 - 170 cm in height and 60 - 70 cm in width.
It is better to place the entrance door to the dressing room on the south side. This will protect from the cold north wind, and even in winter snow drifts on the south side there will be fewer.
The door to the steam room is made even lower. This door should open not into the steam room, but into the dressing room. This stops the penetration of steam, and the air in the waiting room will remain dry. Technical purpose of the dressing room – creating an obstacle to cold air entering the steam room. You can relax in the dressing room to get maximum pleasure from taking water procedures.
The dressing room can be built of any size, but usually its dimensions are 2x3 meters. In this small room It is quite possible to place a table with benches and a hanger. Selecting options interior decoration quite big.
Typically, a bathhouse built from logs does not need additional covering. The main task in this case is good insulation and treatment of wood with impregnations., protecting the tree from negative influences.
If the building still needs interior decoration, then there are quite a lot of options. It should be noted that due to high humidity the selection of materials for interior decoration must be taken seriously.
Materials suitable for finishing the walls of the dressing room.
- PVC. This inexpensive and practical material is easy to install, and smooth wooden walls do not even require a frame. The choice of colors is wide, allowing you to create a design in any style. But plastic cannot be used on the wall between the dressing room and the steam room, since when heated it can become deformed and release harmful substances.
- Rubber paint. A new product that is quickly conquering the market. This paint can be applied to any surface. The paint is waterproof, does not peel off or crack.
- Block house imitating log walls, fits perfectly into the interior of the dressing room, however, it must be installed carefully, especially at corners, at junctions with windows, doors, and near sockets.
- Lining. The sheathing board is positioned vertically to prevent moisture retention. Its thickness must be at least 16 mm. On flat wooden surfaces, the board can be laid without lathing.
Which wood is best to use for cladding the dressing room?
- Oak. Meets all requirements, moisture resistant, strong, durable. It has antiseptic properties and has a positive effect on blood vessels and pressure.
- African abash is characterized by low heat capacity, hardness, resistance to deformation and good operational properties.
- Canadian cedar is resistant to high humidity, fireproof, and does not deform due to temperature changes. When heated, it releases antibacterial essential oils.
- Linden has great stability of texture and color, does not release resin when heated, absorbs sounds and water, and emits a pleasant relaxing aroma.
- Aspen is impervious to moisture and does not deform. May lose its appearance over time, so it needs processing. The aroma of aspen is soothing.
- Larch is durable and therefore difficult to process. Withstands difficult operational properties and is durable. Reduces blood pressure and strengthens the immune system.
- Pine is ideal for finishing a dressing room. It is resistant to rot and fungus, does not crack or deform, and is also durable. Over time, the pine acquires a pleasant reddish tint. It has bactericidal properties and improves immunity.
Floor finishing can be made of wood or use ceramic tiles with anti-slip coating.
Waiting room design options
Dressing area design
The main quality that a dressing room should have is convenience. When coming to the bathhouse to take a steam bath, vacationers should not think about where to undress, where to put things so as not to get them wet or dirty. Therefore it is necessary to provide comfortable benches, clothes hangers and shelves.
In addition, it is advisable to arrange the dressing room so that there is a place for gatherings with friends and relaxing after the steam room. The interior of the dressing room should be comfortable and functional.
Russian style
Most traditional style for a bath. The room can be easily transformed with the help of various traditional little things: fragrant oak and birch brooms, bunches of dried herbs, decorative bast shoes, a large samovar with a shiny side and a bunch of bagels. Wicker chairs, carved wooden benches and tables, carvings on wooden panels, birch and rowan motifs, dishes and towels with ornaments. You can be inspired by the interiors of traditional Russian village houses.
Bring elements to the dressing room home comfort, like in grandma’s country house, it will help upholstered furniture and textiles - cute curtains, tablecloths, napkins and towels. A high-quality built-in hood will help protect all things dear to your heart from excess moisture.
Goblin style
Quite a popular solution. Furniture of rough design, often imitating stumps and snags, natural and plant patterns, animals and plants carved on wood. The decor will be complemented by a mirror framed by a frame made of driftwood, painted with dark varnish. Hang brooms and bunches of dried herbs. This dressing room gives the impression of a fairytale forest house, feeling close to nature. In the photo you can appreciate the charm of this style.
Yacht style
This style is also quite popular in modern baths. It is great for rooms that combine wood, metal and plastic. If your dressing room contains these elements, then you just need to stylize them. To turn a dressing room into a real captain's cabin, you need:
- chrome visible metal parts and surfaces. Pipes that were previously hidden may become bright accent yacht design;
- fur is another important attribute. A fur blanket or animal skin on the wall or floor will perfectly complement the interior;
- the door to the boiler room, various control levers and other elements of the technical part can be highlighted and stylized;
- on a floor made of an excellent, strong board, a red carpet made of moisture-resistant material will look great;
- clapboard is perfect for wall decoration; oak will look good in this style;
- decorative elements and furniture should be selected that are moisture-resistant and durable.
You can see excellent examples of yacht style in the photo.
Classic style
In the bathhouse you can feel not only like yachtsmen, but also aristocrats and nobles. To do this you need to select classic design. Furniture with graceful shapes, curved legs, skillful carvings, gilding, shelves with an interesting elegant design, curved antique hangers. Textiles will help create the right atmosphere - a luxurious tablecloth, stylized furniture upholstery.
Furniture
What kind of furniture is needed in a bathhouse? You certainly won’t be able to do without a bench and a hanger, this minimum required. But this does not mean that nothing else is needed in the waiting room. At all a small chest of drawers or whatnot would be useful, where you can put clean clothes, towels, tablecloths and other necessary things. Of course, if possible, then in the dressing room you can place not only a chair and benches for relaxation, but also a refrigerator or even a TV.
If you want to place a sofa in the dressing room, then choose upholstery made of leather or leatherette; due to high humidity, textiles will quickly become unusable. If you don’t like sitting down on your skin after a steam room, then buy a bedspread made of natural fabric. All textiles in the dressing room should be easy to wash and dry quickly. For long service life of furniture and decorative elements in the dressing room, you need to ensure that vapor barrier and insulation are done according to all the rules.
Choose the design you like or come up with your own. Each dressing room looks different and bears the imprint of the owner’s character. See interesting ideas you can in the selection of photos.
Compared to the old Russian bathhouse, the layout modern bathhouse an additional element was added - a dressing room.
The functions that this room performs are important:
- It serves to protect the relaxation room, boiler room, pool from high humidity and steam escaping from the steam room;
- A warm dressing room allows you to enter from the street not immediately into the steam room, but as if into the living room and serves as a connecting link between the rooms. This is also often where the oven is located;
- This room is spoken of as the face of the bathhouse, so special attention is paid to how the dressing room looks inside.
The photos of the dressing room design presented in the article allow you to see what interesting elements and materials can be added to the interior of this room.
The traditional purpose of the dressing room is to use it as a changing room and storage of bath brooms. A samovar is also placed here and gatherings are organized. This room is a walk-through room and has important technical knowledge.
The design of the dressing room is the personification of the entire style of the bathhouse. For traditional bath It is especially welcome to use the Russian style directly. The Russian style will be given by fragrant bundles of brooms, a traditional samovar, and bast shoes on the walls used to decorate the walls.
For those who prefer a cozy home style, it is recommended to decorate the room with fabrics, curtains on the windows, hang pictures, and put a sofa.
IN last times The yacht style is gaining great popularity. It is characterized by a combination of cold metals with soft tissues, warm wood with plastic structures.
A fairly popular solution is the design, which is called the goblin style. The decor of the room is complemented by rough-shaped furniture made in the form of stumps, snags and other decorative elements. Brooms and bunches of dried grass are also used, which are hung on the walls, thus creating the effect of unity with nature.
Furniture and materials for finishing the dressing room
The only furniture in old-style Russian bathhouses was benches, and the walls were left completely untreated.
IN modern construction For wall decoration, lining and natural stone. Although the stone is used extremely rarely due to its high cost.
For finishing you can use budget option– pine lining, not very different high quality compared to other types of materials. This material is well suited for decorating a dressing room where there is no extreme heat. The knots on the panels will serve additional element decor. The panels are mounted vertically to prevent moisture from accumulating on them.
The following finishing options are also used for wall decoration:
- Processing rubber paint, which is water-resistant, does not crack or peel. You can use any surface to apply it;
- Interesting design The dressing room will be covered with wall cladding using a block house. Particular attention is paid to joining elements at corners;
- Another inexpensive and practical material is PVC. To install it on a flat wall, no frame installation is required. Wide selection color range allows you to choose a color to suit every taste and create a unique design style. All walls of the room cannot be finished with plastic, otherwise the plastic on the wall adjacent directly to the steam room may begin to deform, releasing toxic fumes.
Wicker furniture will be functional and comfortable for the dressing room. It is not expensive, does not take up much space, and is also easy to maintain and use. The only condition is the need to control air humidity, which can be done using special dryers and ventilation.
Lighting occupies a special place in the design of the dressing room. Traditionally it is set to soft, muted. This is done so that every person, opening the door of the bathhouse, leaves worries and worries behind, and tunes in to relaxation.
Also, one should not forget about the floor of the dressing room, which should be warm in order to make it more pleasant to leave warm bath without experiencing discomfort (see: What is the best material to make a bathhouse floor from).
Interesting and functional design not only the bathhouse, but also the dressing room allows you to make your vacation as pleasant and useful as possible.
