Liquid thermal insulation corundum specifications. Technical characteristics of liquid thermal insulation corundum ®. Application technology on wooden surfaces

The heat-insulating liquid material produced by KORUND, based on its physical properties and consistency, is very similar to ordinary white paint, which is used to paint standard surfaces. Thermal insulation KORUND has only positive reviews. All this is due to the fact that the material consists of a high-quality acrylic binder component, ultra-thin ceramic microspheres with the composition of rarefied air and a specially developed composition of fixatives and catalysts.

In the production of such materials, special additives are also used, which completely exclude the appearance of corrosion and fungal accumulations in conditions of high humidity. Thanks to this composition, liquid thermal insulation KORUND (read reviews on our website) is flexible, soft, light and extensible.

After application, the insulation forms an elastic polymer sheathing, which has unique properties in comparison with.

The new generation material has already proved its reliability as a temperature preservation component. In addition, KORUND thermal insulation technical characteristics are favorable for combating corrosion and the appearance of condensate on cold surfaces.

Varieties of materials KORUND

Thermal insulation products of the KORUND company have several varieties:

• CORUNDUM ANTICORE

A versatile material that can be applied directly to rusty surfaces. Before application, it is enough to walk over the surface with an ordinary metal brush to remove the dry layer of rust.

The insulation has an additional anti-corrosion property. This significantly reduces the cost of preparing the treated surfaces.

• CORUNDUS CLASSIC

It is an ultra-thin material with good thermal performance. During transportation, the liquid composition of the insulation is practically not divided into fractions.

• CORUND FACADE

This type of material is applied in layers (thickness from 1 mm), so it subsequently looks like. FACADE heat-insulating paint reviews from customers are also only positive. This ultra-thin liquid heat insulator is used for concrete surfaces.

FACADE paint also received excellent reviews when used together with ANTIKOR paint.

The principle of operation and scope of insulation KORUND

The essence of heat-insulating materials of the liquid-ceramic structure KORUND lies in the needs of those areas where it is extremely necessary to preserve and save heat inside buildings. Thermal insulation paint KORUND (characteristics), the temperature of which implies the use on the territory of different countries (Russia, Belarus, Ukraine, Kazakhstan, South Korea, Asia and the European Union), has high elasticity.

KORUND materials are widely used in interior walls, roofs, concrete floors, window slopes, cold and hot water piping systems, steam pipelines, cooling systems.

Liquid thermal insulation KORUND, reviews of which say that it can also be used for insulation of refrigerators, trailers, tanks and other containers.

The temperature regime for the use of materials ranges from +250 o C to -60 o C.

Specifications and Benefits

The main technical indicators of heat-insulating paint (reviews) are as follows:

• does not collapse under the influence of ultraviolet radiation;
• the method of application is similar to paint;
• has the effect of a thermal barrier;
• does not pass moisture and is not exposed to saline aqueous solutions;
• protects the surface from moisture, temperature difference and precipitation;
• does not support combustion (at a temperature of 800 ° C, the material undergoes decomposition with the release of nitrogen and carbon oxides, at a temperature of 260 ° C, the material simply begins to char);
• KORUND thermal insulation also shows technical characteristics in terms of environmental friendliness of the product (does not contain harmful organic compounds);
• 1 mm thermal insulation layer is comparable to 50 mm rolled insulation.

The main advantage that KORUND heat-insulating paint has: characteristics, heating temperature.

It is possible to work with liquid heat-insulating paint without additional ventilation. Compared to other thermal insulation materials (coarse and hard), liquid paints are applied much faster and easier.

In addition, a thin liquid layer of insulation is much lighter in weight, for example, than a thick-walled material.

1. 
   ISOVOL insulation is one of the recent discoveries in the modern generation building materials market. ISOVOL insulation, the technical characteristics of which indicate high thermal insulation performance, is intended for ...
2. 
   The production facilities of the PAROC brand are located in Sweden, Finland, Lithuania and Poland. Official representative offices from which you can purchase PAROK insulation (technical characteristics and properties are located ...
3. 
   ISOROC produces a wide range of heat-insulating materials intended for use in a wide variety of places in buildings and structures (in walls, ventilation shafts, various ceilings, roofing, pipelines...
4. 
   Extruded polystyrene foam is a very popular product in the building materials market. The qualities and properties of this material are recognized as truly unique, as they make it possible to facilitate the building structure...
5. 
   ISOBEL insulation is a new productive material that is produced using innovative technologies on the latest foreign-made equipment. It was created on the basis of mountain basalt rocks. Heater IZOBEL,...

Corundum - thermal paint developed by Russian specialists and a new word in thermal insulation of any surfaces. Some types of this paint work even at temperatures above 500 degrees. And all because the material is not combustible.
Easy to apply, Corundum is a thermal insulation that lasts for a long time, from 15 years, and in terms of heat preservation replaces an additional wall of one and a half bricks.
Thermal paint is a unique development that gives protective properties to the walls of buildings, facades, concrete slabs. Using corundum paint, you save money on thermal insulation.

According to its composition, it is a suspension, water-based or varnish-based, which covers various surfaces well, even with irregularities. The consistency of the paint is pasty, the color is gray or white. It is convenient to work with a brush, roller or sprayer. The greater the thickness of the thermal paint, the higher the thermal protection will be. Its service life is from 15 to 40 years.

Insulation paint - multifunctional. It keeps heat well, does not allow water to penetrate into structures, and protects against mold formation. Corundum thermal insulation extends the service life of pipes, tanks, refrigeration equipment, air conditioners. Keeping warm is the main purpose of thermal paint, so it is indispensable for thermal insulation of pipes. The materials currently used are short-lived and harmful to humans. Pipes covered with corundum thermal insulation endure exposure to precipitation and sunlight.

According to sad statistics, a huge number of fires occur through the fault or with the direct participation of heat-insulating materials. Often the walls are lined with combustible thermal insulation, and in case of fire, fire with lightning speed with the help of this insulation spreads throughout the building, spreads to the roof and neighboring entrances. To prevent this from happening, use heat paint. It is an inexpensive, safe in all respects material that does not support combustion.

Liquid thermal insulation Korund passed climatic tests, which showed that the effectiveness of protection of coated products is maintained for at least 10 years.

Thus, ultrathin thermal insulation Corundum is an effective technological material that meets all the requirements that apply to this class of thermal insulators. Among its shortcomings, it can be noted that in the presence of performance characteristics inherent in all ultra-thin insulations, it differs in an unfavorable way by a higher price.

An innovative material that appeared relatively recently, but has already managed to attract a lot of attention in relation to itself. Why? The liquid base of ceramic thermal insulation Corundum changes the idea of ​​insulating materials after the first use. The substance forms a fairly thin film, which has protection from an aggressive environment and a minimum thermal conductivity. An interesting point is the weight of the thermal insulation material before and after application. When the composition dries, its weight decreases to an insignificant figure and is almost invisible.

The use of such material as liquid ceramic thermal insulation Corundum has very specific goals:

• Protection from external factors and maintaining integrity;
• Insulation of pipeline systems;
• Thermal insulation of the room.

Korund has made sure that its products are as effective as possible for its customers by presenting the following products to the market:

Classic

It has multifunctional properties and is resistant to temperature runoff (-60/+200 °C) and is able to withstand short-term critical temperature points (up to 260 °C). Designed specifically for the insulation of the main elements of the building: plumbing, heating boiler, walls, openings, facade decoration and other partitions, which protect the premises from climatic conditions.

Facade

This thermal insulation from Korund was created to insulate the facade of the room (residential or not, it does not matter). It has good adhesion to many surfaces, that is, high-quality use is available with almost any facing material. It has a high rate of resistance to weather vagaries and retains a greater amount of heat generated in the room, compared to foam insulation.

Anticorrosive

A unique coating to protect and prevent the effects of rust. It has a high rate of resistance to corrosion. The mixture has been widely used for thermal insulation and protection of reinforced concrete and metal structures, pipes, which are used everywhere, as well as other metal products used in construction. It boasts such an opportunity as applying the mixture to the surface without first removing traces of plaque and rust.

Winter

Insulating coating, which is designed for conditions with low temperature properties. Thanks to its special composition, it is resistant to adhesion from surfaces after application. Including those surfaces that have a different basis - liquid and solid. In addition, such a coating protects well from the effects of alkali, salts and many acids.

The use of liquid material - ceramic thermal insulation Korund

The use of such a heat insulator does not require special expensive tools. A standard air gun will work well. It is also possible to work with such improvised tools as a roller and a brush. The application itself is simple and fast. The coating that forms the heat insulator from Corundum is even and seamless. This property has a good effect on the preservation of heat.

Liquid thermal insulation Corundum is a kind of coloring material, after application of which, a high-quality ceramic thermal insulation layer is formed on the surface, which also protects the surface from the negative effects of corrosion.

What is liquid thermal insulation Korund

Do you need to carry out internal thermal insulation of the walls of the room, while you want to lose a minimum of free space? Or do you need to insulate the walls from the outside, but at the same time you want them not to lose their attractive appearance and so that a minimum of money is spent on such insulation measures? Then the only correct solution would be the use of liquid thermal insulation Corundum.

Residents of our country have been living in houses with non-insulated walls for many years. And all this because they are afraid of a long, laborious and expensive process of warming. But today there is a material that can effectively, quickly and inexpensively solve this problem. And this material is liquid corundum thermal insulation. If you go through hardware stores, you can find a lot of ceramic-based heat-insulating materials. But relatively recently, scientists have developed such a heat-insulating material that is better in its technical and operational characteristics than analog materials, while its cost is no different.

Scope of liquid thermal insulation Korund

Due to the fact that Corundum thermal insulation has a liquid consistency, it has a lot of advantages over its direct counterparts, since it can be applied to a wide variety of surfaces:

• Roof;
• window slopes;
• Pipes;
• Facades of buildings;
• Various kinds of containers;
• Internal and external walls;
• Cooling chambers.

In order to prevent any condensate from forming on the surface of the pipeline, and hot water to come to you with meager heat losses, it is recommended to treat the pipes with Corundum liquid thermal insulation. The duration of the operational period of such a coating is equal to 15 years, such thermal insulation can withstand significant temperature fluctuations from -50 to +250 degrees, no analogue can boast of such technical and operational characteristics, and this is subject to a relatively low cost of material.

Advantages of liquid thermal insulation Korund

The main advantages of liquid thermal insulation Corundum include the following positive points:

• The application process can be carried out independently, for this a regular brush or sprayer can be used;
• Just one millimeter of liquid thermal insulation Corundum will provide the same properties as 600 mm of rolled thermal insulation material;
• It is considered a waterproof material, is not affected by the negative effects of saline and ultraviolet radiation;
• Provides visual access to the inspection of the isolated surface;
• It is a fire-fighting material that does not support the combustion process. When exposed to 260 degrees, the material is charred, but if the temperature rises to 800 degrees, then the process of decomposition begins with the release of nitrogen oxide and carbon, and these substances stop the combustion process.

Thermal insulation corundum

The ultra-thin liquid ceramic thermal insulation Korund offered on the market is the optimal solution for many cases in terms of its product protection efficiency, durability, ease of application, but unfortunately not the price. Ultra-thin thermal insulation Corundum is a water-based liquid composition, the main component of which is a polymer latex composition. Its scope is from covering the walls of buildings and structures to thermal insulation of various types of pipelines (air, water pipes). It is also used for application to various types of industrial equipment.

Properties of liquid ceramic thermal insulation Corundum.

Like all ultra-thin thermal insulations, in addition to direct thermal protection, Corundum also prevents corrosion. In addition, the material has dielectric properties. However, in terms of price-quality ratio, it is somewhat inferior to analogues - for example, Aktorm liquid thermal insulation.

Corundum, like all representatives of this class of materials, has a significant advantage over traditional insulation with mineral wool, as it lays down in a continuous layer, leaving no gaps. In the case of mineral wool, unprotected areas always remain, which are channels for the flow of heat. In addition, Corundum is very simply and quickly applied to almost any kind of surface. In this case, it does not really matter whether it is a plane, a rough wall, or complex-shaped equipment. The composition lays down in an ultra-thin layer, providing maximum thermal insulation, the application process itself is almost the same as conventional painting and does not require much time. The composition can be applied at temperatures up to -10 ° C, which is approximately equal to or even slightly inferior to that of Aktorm thermal insulation.

Thermal insulation corundum - prices and discounts for wholesale buyers

PRICE for 1 liter - 330 rubles. WHOLESALE DISCOUNTS %

With all the positive qualities, Corundum thermal insulation is also affordable. You can choose convenient packaging and save on installation: the paint is applied with a sprayer or brush. Consumers who have used Corundum clearly distinguish this thermal paint from similar ones. Even if you don't have special equipment, just putting your hand to the wall covered with Corundum, you will feel warm, while the unpainted wall will cool your hand.

Corundum - the warmth of your home!

• The material is made in accordance with TU-5760-001-53663241-2008
• Sanitary and epidemiological conclusionNo. 34.12.01.576.P.000315.06.08 dated 18.06.2008
• Fire safety certificate No. SSPB.RU.OPO58.N.00117 dated 02.07.2008

Liquid ceramic thermal insulation CORUNDUM similar in texture plain white paint which can be applied to any surface.

Liquid thermal insulation CORUNDUM consists of a high-quality acrylic binder, an original composition of catalysts and fixatives, ultra-thin-walled ceramic microspheres with rarefied air. In addition to the main composition, special additives are introduced into the material, which exclude the appearance of corrosion on the metal surface and the formation of fungus in conditions of high humidity on concrete surfaces. This combination makes the material light, flexible, stretchable, with excellent adhesion to the surfaces to be coated. After drying, an elastic polymer coating is formed, which has unique thermal insulation properties compared to traditional insulators and provides anti-corrosion protection.

Liquid thermal insulation CORUNDUM- a new generation of thermal insulation that has proven its reliability as a means of maintaining surface temperature, suitable for use in almost all atmospheric conditions. In addition, heat-insulating paint CORUNDUM helps fight condensation on cold surfaces and corrosion (modification of Corundum "Anticor" contains special inhibitors of the corrosion process). Liquid thermal insulation CORUNDUM passed tests according to standard standards in Russia, in the neighboring countries (Belarus, Ukraine, Kazakhstan), in the European Union, in Asia (South Korea). The product has high performance in such characteristics as elasticity and resistance to weathering (after polymerization, drying). The microstructure of liquid thermal insulation gives excellent thermal properties, and ensures a long service life without the need for multiple repairs. Under standard operating conditions, the service life of liquid thermal insulation Korund will be at least fifteen years. The full service life of this heat insulator, subject to the application process and the absence of an aggressive environment, will be almost half a century.

OPERATING PRINCIPLE OF LIQUID THERMAL INSULATION CORUND

The essence of the unique thermal insulation properties of the liquid-ceramic material CORUNDUM consists in spheres that are able not only to insulate the covered body, but also to retain heat.

FIELDS OF APPLICATION OF LIQUID THERMAL INSULATION CORUND

Korund material is highly effective in thermal insulation of building facades, roofs, internal walls, window slopes, concrete floors, hot and cold water pipelines, steam pipelines, air ducts for air conditioning systems, cooling systems, various tanks, tanks, trailers, refrigerators, etc. It is used to exclude condensate on cold water pipes and reduce heat loss in accordance with SNiP in heating systems. The material is operated at temperatures from - 60 ˚С to + 250 ˚С. Service life of material from 15 years.

ADVANTAGES OF LIQUID HEAT INSULATION CORUND

• Applied like paint, acts as a thermal barrier.
• A layer of coating 1 mm thick provides the same insulating properties as 50 mm rolled insulation or brickwork 1-1.5 bricks thick.
• It is an insulating material that does not support combustion. At a temperature of 260°C it chars, at 800°C it decomposes with the release of carbon monoxide and nitrogen oxide, which helps to slow down the spread of the flame.
• Environmentally safe, non-toxic, does not contain harmful volatile organic compounds.
• Does not break down under the influence of UV radiation.
• Impermeable to water and unaffected by aqueous salt solution. The covering provides protection of a surface against influence of moisture, an atmospheric precipitation and temperature drops.
• An additional advantage that liquid thermal insulation provides is the ability to work indoors without additional ventilation. The application of liquid thermal insulation is much easier to apply and saves on installation costs compared to previous generation thermal insulation. The use of an ultra-thin thermal insulator also saves space by reducing the thickness of the insulation layers. Additionally, the use of this heat-insulating material makes possible a radical weight reduction of the entire structure and significantly reduce the cost of building materials. Not to mention the increase in the comfort of being in a heat-insulated living space and savings on heating and air conditioning costs.

Technologies in the field of building insulation do not stand still. Not so long ago, a new development was introduced into production, which allows to improve and facilitate this process as much as possible. This material is called thermal insulation corundum. Its use is not yet so common and not universal, but there is confidence that it has a great future, and it will revolutionize the thermal insulation market.

Important. The material has passed all tests and is fully certified.

The consistency of corundum is liquid. Thermal insulation resembles a suspension or white paint. You can insulate it with a surface of any material. The method of application is the same as that of conventional paint. After drying, a specific coating with elastic properties is formed. It has unique technical and thermal insulation characteristics. For comparison: 1 mm corundum can replace 60 mm mineral wool or a wall one and a half bricks thick.

Coating composition is unique

The composition of this coating is unique. Physicists and chemists in Europe and the USA have been working on its development for many years. It consists of microscopic ceramic balls filled with vacuum (rarefied air). These micro beads bind high quality acrylic polymers, thanks to which the material has excellent adhesion (adhesion) to all surfaces (plastic, metal, propylene).

The intensity of the action of rarefied air molecules located in spherical cavities endows liquid thermal insulation with unique properties.

Corundum also contains water. It occupies 47% of the total volume. After application, part of the water evaporates, and part participates in the process of hardening of the applied thermal insulation.

In addition to the base, corundum contains additives that prevent corrosion and the formation of mold and fungus in high humidity conditions.

Specifications and modifications

Thermal insulation indicators

Superfine thermal insulation corundum favorably differs from other heaters in its performance:

• thermal conductivity - 0.0012 W / mS;
• heat transfer - 4.0 W/ms;
• vapor permeability - 0.03 Mg / MchPa;
• water absorption - 2%;
• t operation - -60°C + 260°C;
• service life - more than 10 years;
• low fluidity;
• safety for humans and the environment;
• does not support ignition (charred at +260°С).

The paint protects the treated surface from condensation and is not destroyed by ultraviolet light, aqueous salt solutions and alkali.

Unlike other heaters, corundum does not create any load on load-bearing walls and other building structures, and also protects metal elements from thermal deformation.

The application of thermal insulation results in a seamless coating that does not allow cold to penetrate through the joints (as with the installation of other heaters).

Important. Corundum paint allows you to operate painted surfaces without problems. They can be inspected at any time, which makes it possible to restore the damaged heat-insulating layer in time.

There are 4 modifications of ultra-thin insulation:

• Korund Classic. Heat-insulating paint for processing various types of plastic, propylene, metal, brick, stone.
• Corundum Antikor. Designed for thermal insulation of metal surfaces covered with rust.
• Corund Facade. Liquid facade insulation. Allowed for indoor use.
• Corundum Winter. It is distinguished by the presence of frost-resistant additives (minor pieces of foam glass, flame retardants and inhibitors), which allow the paint to be applied at temperatures down to -10°C.

Application and consumption of corundum

For the correct application of paint, there is an instruction for its use. The main role here is played by the preparation of the surface to be painted:

1. We get rid of all irregularities on plaster, concrete or brick, cover up cracks, remove old paint, dirt and dust.
2. Serious damage is better to first level out the draft, and then finish the plastering (relevant for walls).
3. We cover the area to be treated with an antifungal agent, let it dry and apply one or two coats of primer.
4. On the finished dry surface, we gradually apply corundum heat-insulating paint. First, one layer 0.5 mm thick, then the second (the first must dry completely) of the same thickness and the third similar layer. For greater effect, the layer of heat-insulating paint should be 1.5 - 2 mm.
5. On top of the thermal insulation (after it has completely dried), decorative coatings are applied.

When calculating paint consumption, first of all, it is necessary to take into account the material and thickness from which the surface needed for processing is made. We also take into account the thickness of the thermal insulation layer.

Advice. Thermal insulation corundum can be used at the temperature of the painted surface ≥+5°С ≤ +150°С.

Laboratory studies have shown that the consumption of corundum thermal insulation with a layer thickness of 1 mm is 1 l / 1 m 2 (without taking into account the method of application and the type of material being painted). In actual use, we add the percentage of overrun (work in calm weather, without wind):

• painting with a brush of metal - 4%, concrete - 5-10%;
• when applied with an airbrush on metal - 15-25%, on concrete - 35-40%.

To make the calculation as accurately as possible, use the corundum thermal insulation consumption calculator. To do this, you will need instructions on the site and the following values: the length and height of all walls and the number of layers of paint. These values ​​are entered into special windows on the computer monitor screen, and the calculation is made.

As we can see, corundum thermal insulation is an ideal choice for insulation. The uniqueness of the development, excellent technical characteristics, ease of application - all this contributes to a good result and, importantly, a significant reduction in labor costs and working time.

"... Reduction of energy losses,
percent, probably by 30, simply due to the fact that a little bit
tinted. It's amazingly simple. The device is guided, really one of
them - cold. She doesn't release anything. And the second is to smoke there
can..."

- Prime Minister of the Russian Federation: Dmitry Anatolyevich Medvedev.

Insulation Corundum is a special paint that forms a ceramic thermal insulation coating which also protects the surface from corrosion.

You need to insulate
internal walls of the room, losing a minimum of area. Or maybe you
want to insulate the outside of the building, but without
damaged the appearance of the building, but also did not spend a lot of money on expensive
cladding materials? Or maybe you need to produce as soon as possible
high-quality insulation of any pipeline or tank?

Some people live for years with
uninsulated walls in cold panel houses simply because
they are afraid of the costly and difficult process of wall insulation, and this
true. But in all these cases there is material capable of
solve all problems with thermal insulation as quickly and extremely
effectively. This material is liquid ultrafine thermal insulation Corundum.

Walking through specialty markets in
any area of ​​our country, you can find a great variety of ceramic
coatings for thermal insulation, for example: mascoat, tsm ceramic, thermal
coat, Isollat, Astratek, Alfatek, etc. But now our scientists have created
a material that has revolutionized the thermal insulation market
liquid coatings, and this material is an ultra-thin
heat-insulating paint Korund, utterly superior to any other
liquid thermal insulation, and even cheaper than some of them.

The fact that this coating is liquid,
gives it a great many advantages in comparison with other types
coatings, for example, the possibility of easy application to the facade of a building,
window slopes, roofs, concrete floors, interior walls, and
various pipes, any containers, trailers, cooling chambers or
tanks. To prevent condensation from forming on the cold water pipes, and
hot water pipes delivered water to you with minimal heat loss, you
you can coat them with Corundum. Liquid thermal insulation Corundum is able to withstand temperatures from - 60 to + 250 degrees Celsius, and its service life is more than 15 years!

Superfine thermal insulation Corundum
is the first independent Russian development that is not
someone's analogue, in the production of which imported
components of the highest quality, and yet it has
acceptable price. This production is certified
guarantee to the consumer that the quality of Corundum thermal insulation is always
will be consistently high. The quality of this product is constantly
confirmed by positive customer reviews, so that the quality
Corundum thermal insulation is our pride. By purchasing this item, you
be sure to buy it again, as to compete with it in the ratio
quality-price-durability cannot be achieved by any other material for
thermal insulation.

To date, four modifications have been developed
thermal insulation Corundum. You can find a more detailed description of them at
pages on the links, and below will be a summary.

The modification Korund Classic was the first to be developed. In general, it is difficult to call it a modification, because this is exactly the Corundum thermal insulation that was developed for the first time.

Following the light saw a modification called Corund Anticorrosive.
The main feature of this modification was the ability to apply it even
on rusty metal, it was only necessary to clean off the loose flakes of rust
with a brush, and then it was already possible to fearlessly apply Corundum Anticorrosive,
using the instructions. This modification is a complete
anti-corrosion and thermal insulation coating and not just a corrosive preservative.

After Korund Antikor, a modification of Korund Zima was developed,
which feature was the ability to apply it at a temperature
air -10 degrees Celsius. Corundum Winter is the newest
development among ultrafine liquid materials for thermal insulation.
Other similar materials cannot be applied at ambient
temperatures down to -10 °C, since their minimum threshold is limited only
five degrees Celsius.

The next modification was Korund Facade,
which could be applied in layers less than one millimeter at a time, but
at the same time, its ability to pass steam was no worse than that of more expensive
facade coatings.

Also, two new modifications of Korund for specialized purposes have now appeared on the market:

The first is Korund Volcano - a modification that can withstand operating temperatures up to +540 degrees Celsius.

The second modification is called Korund
Anti-condensation, which protects the application surface from the formation
condensate is more efficient than, for example, Korund Classic.

This ceramic thermal insulation
can be applied to any surface due to its liquid
state of aggregation, and, in addition to protection against heat loss, also protects
surface from rust, water penetration and sound, which allows
use this thermal insulation in any of the cases listed above.

For the first time, such liquid coatings for thermal insulation
surfaces were developed by NASA under the US government order to cover
space shuttle surfaces. Further tests showed that
this material can be used for more "earthly" purposes of activity,
for example, in industry, construction, etc.

Most of all, this insulation
applied to steam pipelines, hot water pipes,
equipment of boiler rooms, as well as roofs and walls of residential buildings, public and
industrial premises. Moreover, insulation was applied both from the outside
sides of the room, as well as from the inside.

Although the scope of such a coating was much wider than that in which they were usually used. Liquid thermal insulation
could be used as excellent protection against corrosion, chemical
impact, as well as to reduce the heat loss of metal structures.
Here are the most common examples:

Garages and hangars.

Crane beams.

Overpasses and bridges.

Hot water pipes.

Gas and steam pipelines.

Air conditioning systems.

Cold water pipes to prevent condensation.

Boiler equipment and hydrants.

Heat exchangers.

Steam boilers.

Underground and surface oil pipelines, as well as oil storage facilities.

Hot mixing chem. tanks.

Water storage.

Cooling chambers.

Internal coating of military and special vehicles.

Refrigerators.

Auto - and railway tanks with liquids.

Subway and train cars to provide sound insulation in addition to thermal insulation.

Ship engine rooms.

Coating of ships, boats, etc.

In addition to this list, the scope of such thermal insulation
growing all the time. If you look more creatively at where it can be
apply, then the use cases of ultra-fine liquid ceramic
thermal insulation will increase significantly.

The use of liquid thermal insulation
coatings under normal conditions, gives a guarantee of at least 10 years of service,
if it is applied on the outside, and 25 years - if it is applied on the inside
side of the room.

The following will list the advantages of ultra-thin ceramic thermal insulation KORUND:

This coating is easy to apply
absolutely any surface, be it concrete, metal, brick, plastic or
any other coating, incl. various equipment with uneven
surface.

Absolutely easy to adhere to propylene, metal or plastic, which gives the surface protection from air and water.

The material is waterproof and
immune to the effects of salt dissolved in water. 100%
protects the surface from precipitation, moisture and sudden temperature changes.

Reduces heat loss and provides corrosion protection.

Prevents the appearance of condensate on the treated surface.

For good thermal insulation
a layer 1 mm thick is sufficient. This layer replaces
half a centimeter of mineral wool insulation or brickwork in 2
brick thickness.

Insulation can be applied to a surface having any shape.

Due to the low weight and absence
the need to apply a large amount of insulation, absolutely not
creates a load on the treated surface.

Protects metal structures from deformation under the influence of temperature.

Up to 85% of the radiant energy falling on it is reflected from the insulation.

No need to stop work
equipment for the inspection of machined equipment or parts that, in
in turn, reduces the cost of compensation for downtime of this
equipment.

The insulation is immune to UV radiation.

Since liquid thermal insulation is quite
quickly applied, this gives a reduction in labor costs for its application - its
can be applied very quickly with a brush or special paint
equipment.

If the coating is damaged, it is very easy to restore it.

Does not burn. But not just does not burn, to
In addition, it reduces the rate of spread of fire, since at a temperature
flame above 800 degrees, Corundum thermal insulation begins to release oxide
nitrogen and carbon, which give the effect of slowing down.

Liquid thermal insulation Corundum is environmentally friendly, does not emit toxins and does not contain hazardous volatile compounds.

Resistant to solutions of salts, alkalis and acids.

It has a relatively low price with the effectiveness of more expensive materials.

It has the lowest thermal conductivity of all insulating materials - 0.001 W / m ° C (at an ambient temperature of + 20 ° C).

Superfine ceramic thermal insulation Corundum
is a mixture with many ceramic and vacuum balls,
inside which there is a vacuum, which are in suspension in
liquids, which include acrylic polymers, synthetic
rubber and pigments. This composition gives this thermal insulation an unprecedented
flexibility, adhesion and low weight.

Thermal insulation is a homogeneous mass of white color, after drying of which a thin insulating coating is formed.

Thermal insulation Corundum can be diluted with water for use in non-ventilated rooms.

Can be applied to rubber
plastic, metal, concrete, glass, brick, wood and so on. Requirements,
which are presented to the surface before application are not large - it
must be clean, free of grease and rust (excluding Corundum Anticorrosive) and
have an acceptable temperature for this modification.

Superfine thermal insulation Corundum
can be applied both with a brush and with a special paint
equipment. In the second case, the highest
performance.

The thickness of one layer of thermal insulation can
reach a maximum of 0.4 mm. 20 minutes after
a layer is applied, a waterproof coating is formed on it. one layer
dries for about a day at room temperature. The next layer is applied
only after the previous one has completely dried.

Insulation consumption when applied by roller
is approximately 0.5 liters per square meter. If
insulation is applied with special painting equipment, then the consumption
is approximately 0.4 liters per square meter of surface.
More or less consumption depends on the type of surface and the required
thermal insulation.

Applying the material is as easy as painting any surface with ordinary paint or varnish.

Ultra-thin ceramic thermal insulation Korund is produced in containers in the form of plastic buckets with a capacity of 20 liters.

Try the quality of the ultra-thin liquid thermal insulation Korund, and you will be satisfied with the result!