Quality siding for your home. Which siding is better - acrylic or vinyl. On the principle of arranging a hinged facade system

When choosing what is better to sheathe the house from the outside, so that it is beautiful, fast and cheap - many stop at such material as siding.

It would seem that everything - the problem is solved, the lining is selected.

However, this is only the beginning of the journey. After all, in fact, siding is such a popular material that there are many varieties of it on the market. And there are new ones all the time.

So, for example, when answering the question of which siding is better vinyl or acrylic, it is important to note that acrylic siding differs from vinyl siding in addition to the percentage of acrylic in greater UV resistance. The rest of their characteristics are identical.

And when choosing which siding is better, aluminum or steel, it is important to understand that the difference is only in the structure of the core. It is impossible to check this visually. And it’s not yet a fact that you will be given the correct information.

Therefore, it makes sense to compare only those materials that differ significantly from each other, namely:

• wooden siding (block house);
• (PVC, plastic);
• (steel, metal siding).

Which siding is better vinyl or metal

The table shows the comparative characteristics of the three, based on these data, we can draw a definite conclusion which material is suitable for specific tasks.

Additional Siding Comparison

Are there differences within the same species?

metal siding

It should be noted that metal siding can be made from steel different type coatings.

Comparative characteristics of coverage by type are provided in the table.

Vinyl siding

Parameters of different brands vinyl siding presented in the table.

Calculation of the cost of siding for facing a house

On the total amount the cost of cladding the facade with siding is influenced by a number of factors.

Comparative parameters:

• Siding cost

  Calculated according to the formula:

  The price of the material + the cost of additional elements and components.

  Material cost = price per square meter * number of square meters. Similarly, the cost of additional elements for siding is considered.

  To calculate the amount of siding, you can use a special one.

• Fastener cost

  For the types of siding under consideration, the amount will be approximately the same.

• Cost of delivery

  Depends on the size of the siding and accessories to it. The vinyl panel is quite long, but it bends well. Wooden panel of small length. They can be easily brought to the Gazelle. Metal siding 6000mm long. requires application vehicle with suitable body length. This may affect the shipping cost.

• Installation cost

  Installing a block house will take more time if you install it yourself or money if you involve professionals. With vinyl and metal, the situation is reversed.

• Availability of a guarantee.

  The longer the warranty period, the better for you as a buyer.

• Lifetime costs.

  The highest costs for wood siding. Vinyl and metal siding are low maintenance.

• Energy efficiency

  Wood retains heat better than any comparable material. For vinyl siding, this figure is negligible. Metal siding does not contribute to the preservation of heat at all and requires the use of insulation. Consequently, the low energy efficiency of the material will either lead to additional costs for heating the house, or to additional costs for its insulation.

Conclusion

We hope that provided in this article Comparative characteristics shed light on what types of siding are, what are their distinctive characteristics. This information will answer the question of which siding is better vinyl or metal, and states why.

AT recent times Increasingly, homeowners, if they want to sheathe the facade of the house, prefer siding. This material improves the aesthetic performance of the house and, more importantly, protects the building from the effects of aggressive external environment. Siding is easy to install and does not require special tools. But how do you choose siding for your home? This will be discussed in this article.

Siding is made from different materials. These include metal, wood, PVC and vinyl. The panels obtained as a result of processing successfully imitate other materials. Siding imitating brick appearance houses that are aesthetically pleasing and more expensive, even though it will actually cost you less to finish the house. Siding that imitates stone will give your estate solidity despite the fact that the mass of the cladding itself will be insignificant, and wood-like siding will create an imitation in the best ecological traditions with high rates fire resistance.

If you decide to choose one of the siding options, you should consider that each of them has unique characteristics, advantages and disadvantages.

Varieties of siding

Now you know all the types of siding, their advantages and disadvantages, and it's up to you to decide which siding is better. Below are some more recommendations to consider when buying panels for facade cladding.

What to pay attention to

It is important to pay attention to the width of the panels. It should be the same over the entire surface of the siding.

Sometimes they try to sell the products of unskilled specialists under the guise of a defective batch of a reputable manufacturer, but you should not succumb to such tricks, even if the price of the material is very low.

If you live in an area where gusty winds are not uncommon, then check to see if the panels have a hurricane lock, which is a small bend at the top, near the mounting hole. If you buy siding with a hurricane lock, then even with strong winds your facade will remain intact.

Steel siding can withstand severe frosts, so if you live in the north of the country, then it is better to buy just this type of facade cladding. However, vinyl panels are more resistant to deformation. If the house you want to clad is newly built and will shrink in the future, then it is better to purchase vinyl panels.

Siding color High Quality the same from all sides, and this indicates that the material was dyed in bulk. This type of staining is more resistant to aggressive environmental influences, the color does not fade and does not crumble.

When making a purchase of siding, immediately take care of purchasing installation accessories, because without them installation of panels is impossible.

If you have any questions on the topic, then write comments to the article. Our experts will provide you with comprehensive information on your question. Did our article help? Then share how it was useful for you.

Video

Choose siding carefully and listen to the recommendations of experts:

In this article, we will look at the features of siding that you should pay attention to when choosing this finishing material. Material, color, design - these are just some of the criteria for the right choice.

Main selection criteria

Of the huge number of different materials for facade decoration, many prefer siding. And this is not surprising, because it is very attractive in appearance, easy to install, resistant to different types adverse effects and is inexpensive.

But the question arises, how to choose the right siding for the house so that it is of good quality and lasts a long time. To do this, you need to pay attention to the following parameters.

Material

There are several main types of siding:

• Vinyl. The most common type of material made from polyvinyl chloride. It is quite light and plastic, does not weigh down the construction, is easy to install and maintain, and is very diverse in color and texture. This is one of the most advantageous materials for sheathing, because it has an attractive cost and a long service life. Among the shortcomings can be called a lower environmental friendliness and the degree of insulation of the building (compared to other types).
• Metal. Such siding has a very high strength, is not afraid mechanical influences well insulates the building. However, it adds weight to the building, is relatively expensive, and has less variety in colors and textures.

• Wooden. The most environmentally friendly material with a large color variety. But it is prone to decay, has a shorter service life, and is fire hazardous. In addition, this option will become completely irrelevant if you are interested in the question of how to choose siding for wooden house.
• Ceramic. This type siding is very beautiful, has a noble appearance, is characterized by increased environmental friendliness and resistance to adverse factors. At the same time, its cost is quite high, and its weight is heavy.
• Cement. By analogy with ceramic siding, this siding has increased strength and is resistant to various aggressive environments, environmentally friendly. However, its appearance is not so attractive, and the cost and weight are high.

Based on the foregoing, it is permissible to conclude that vinyl siding will be the best option in terms of price / quality ratio. In second place is metal, and in third - ceramic.

Colour

Color is an important parameter not only in terms of aesthetics, but also in terms of cost. This is because the coloring pigment is one of the most expensive panel components. It is on it that many manufacturers seek to save money. If you are interested in how to choose siding for a summer house / house by color, then please note that the color should be uniform, without different bands and color spots.

Important! Some panels have a brighter exterior and a lighter exterior. This means that a smaller amount of pigment was added to the composition of the materials. Such siding has a lower cost, but similar to the usual one - performance characteristics.

Design

The design features of the panel can tell a lot about the quality of the material. When thinking about which siding to choose for your home, carefully consider the material of each brand. good panels must have:

• Homogeneous surface and structure. There should be no bumps, bumps, etc.
• Same mounting holes. As a rule, they are oval in shape and should be located strictly in a straight line and have a single size.
• It is also very important that each panel in the batch has the same look. Otherwise, problems with the installation and connection of sheets to each other are not ruled out.

Once you have determined how to choose the right siding for your home based on external characteristics it is important to consult with a specialist. It is best to contact the managers with questions of interest. hardware store where purchases will be made.

Questions to the seller

Before choosing a siding for your home / cottage, consult with the seller, look at the reviews on the Internet. The consultant is obliged to provide you with information about the supplier of the material and the terms of the guarantee. Here it is important to pay attention to the country of origin, the region of sale of this brand, the warranty period, the defects that are included in it.

Be sure to check if the installation instructions are attached to the siding. If not, then you have the legal right to claim it. Otherwise, if this instruction is not followed, the panels may be damaged, and the supplier will refuse to compensate for the losses.

Other important points

If, based on the above parameters, you have already determined which siding to choose for a wooden house (or a house made of other material), you will subject it to a small final check. To do this, just take the sample presented in the store and bend it at the nail holes. quality material should not crack/break. Otherwise, such panels will not withstand the loads and will quickly break.

Attention! It is important to look at the siding to the light. It should not give shine - the glossy surface will be very hot from sun rays which may cause the panel to warp. And finally, pay attention to the packaging. Most the best option there will be a rigid cardboard box that will protect the sheets from deformation during their transportation.

When wondering how to choose siding for a summer house or a house, pay attention to its appearance, material, color and design. In this case, do not hesitate to find out the information you are interested in from the seller. Thanks to this, you will make a worthy choice and get quality panels with long term services.

If you need to quickly and efficiently finish the exterior walls of the house, then siding will be the best solution. This is the name of the finishing material, which is produced in the form of panels and serves two purposes: protecting the facade from adverse effects and giving the building a more attractive appearance.

But different finishes have different characteristics, so it is very important to choose the best way, that's what we're going to talk about in this article.

Types of siding and their features

This is not a rating. different options because they are very different in their characteristics. This is detailed description the merits and demerits of each solution. Please read all the information below carefully and you will be able to decide which material is best for your situation.

Vinyl siding

This option has the following features:

Illustration	Description
	Made from extruded polyvinyl chloride. This is a very cheap raw material, and thanks to this, the cost of this type products is the lowest among all. For a square meter you will pay from 70 rubles, which is very, very cheap.
	Service life is about 10 years. This is the smallest indicator among all options. But, given the cost, even such a period can be considered quite good, because during operation you do not need to paint the surface, it is enough to wash the walls with a hose to refresh the siding and remove dust and dirt from it.
	: temperature changes, high humidity, precipitation. Pests are not dangerous to him, he does not rot and is not affected by a fungus, which is also important. The material does not conduct electricity, this is also a big plus.

As for the disadvantages, they are:

• Finish looks pretty cheap.. This factor is most often mentioned by those who choose other options;
• The material does not resist deformation very well.. It breaks on impact. Particularly problematic are injuries in winter period, since at low temperatures the siding becomes very fragile;
• The surface begins to fade after a few years. Although manufacturers claim that this will not happen, such a problem does occur.

Acrylic siding

Outwardly, this option is similar to the previous one, but it has many differences:

Illustration	Description
	Made from acrylic polymers. This raw material is an order of magnitude better than PVC, so the coating is much more reliable and durable. The service life of such options is 50 years, which is several times longer than that of the above type of finish.
	The surface does not fade in the sun. Walls retain color vibrancy much longer, so the finish will look fresh in a few years. Another plus is that the material does not reduce its strength during the entire period of operation, while vinyl becomes more brittle over time.
	Resistant to chemicals and non-flammable. This increases the safety of the finish and allows the surface to be washed using detergents.

The main disadvantages are the following:

• The cost starts from 180 rubles per square. Plus, expensive components further increase the cost of plating;
• Doesn't look very presentable. It's still plastic, albeit of high quality, an inexperienced person will not see the difference.

If you are thinking between vinyl or acrylic siding these sections will help you make a decision. It's simple: if you need cheap, then vinyl, if quality is important, then acrylic.

wood siding

Considering the types of siding, one cannot fail to mention this traditional option, its advantages are as follows:

Illustration	Description
	Presentable appearance. The natural texture of the wood looks great. It's not cheap plastic and anyone will appreciate the quality of the finish.
	Environmental friendliness. The material allows the walls to breathe, does not contain components harmful to health. This is perfect solution for a wooden house, since the same material is used for both construction and sheathing.
	Good heat and sound insulation performance. Wood retains heat much better and dampens sound vibrations than plastic and metal.

Have wooden elements and cons:

• High price. A square meter of unpainted material will be approximately 600 rubles, and a painted one will cost 1,300 rubles and more;
• Labor intensive installation. The rest of the options are much easier to mount;
• The need for protection. You will have to treat the surface with special compounds every couple of years;
• combustibility- the tree is fire hazard.

metal siding

This option is gaining more and more popularity due to the following reasons:

Illustration	Description
	Attractive appearance. Special coatings are applied to the surface of the steel, which very realistically imitate various materials: from wood to brick and natural stone. At the same time, the cost starts from 250 rubles, which is not much for such an option.
	Strength and durability. Such a coating resists deformation effects much better. At strong blows the surface may be wrinkled, but will not crack or fall apart. With temperature changes, the metal does not reduce its strength, which is important in regions with long winters.
	The material is not afraid of adverse effects. The metal is not damaged by fungus and mold, it is not spoiled by pests. If necessary, simply wash the walls with a hose and they will look like new.

Main disadvantages metal coating are:

• Low noise isolation. If the walls are not insulated, then noise may occur inside the room during rain;
• Corrosion in exposed areas. If paint is knocked off the surface, then rust can form there, the same thing happens on unprotected ends.

Panels cannot be cut with a grinder! They overheat and rust much faster.

Many people think which option to choose - metal or vinyl. Everything is clear here: metal is better in all respects.

fiber cement siding

Highly interesting solution which has a number of advantages:

Illustration	Description
	Eco-friendly material. It consists of cement, sand and cellulose fiber. Finished elements are characterized by very high strength and resistance to deformation. The surface is hard to damage as it is very hard.
	Attractive appearance. This finish looks modern and is used on different buildings.
	High Performance: Long service life; Not afraid of changes in temperature and humidity; Does not burn; Not damaged by mold; Almost does not fade in the sun.

As for the minuses, it is only one - a relatively high cost. Price square meter is approximately 1000 rubles. But if we take into account the quality, it is clear that the price cannot be low.

Conclusion

You have learned the pros and cons of all the main types of siding and will be able to choose the best option based on the characteristics of each option. The video in the article will help to understand the issue even better, if something is not clear to you - ask in the comments.

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

It is widely known that the construction of the foundation, box and roof of the house is only 30% of its total cost. At least 30% of the funds go to interior work and, finally, 40% - the price of the facade. At the same time, from exterior finish largely depends on the comfort of living in the house and its efficiency. Vinyl siding is one of the most successful facade materials for both a new building and the restoration of an old one. It is lightweight, does not increase the load on the foundation, is quickly and without problems mounted, and can also be part of effective insulation Houses.

The popularity of this facade material has led to the fact that there are several dozen large siding manufacturers on the domestic market. In construction supermarkets, there are many stands of such companies with samples of materials, and they all have an attractive appearance, big choice decors and, according to sellers, excellent performance. However, after several years of operation, it often turns out that the facade has faded, and the panels have deformed under the influence of temperature differences. Of course, in order for the siding to serve for a long time, it must be installed correctly, but the main thing is the quality of the material itself.

Therefore, the choice of the manufacturer is very important. There are several simple criteria to distinguish a reliable company:

1. Time on the market finishing materials. If a company has been producing siding for several decades, its facade panels operated in real houses all this period. And their quality is well known to builders and ordinary buyers, whose reviews form the reputation of the company.
2. Availability of certificates of conformity, product test reports, implemented quality control system.
3. Wide choice of shades, decors and additional elements.
4. Large dealer network. It means prompt resolution of issues with delivery, marriage or return.

This review presents siding manufacturing companies with the best reputation in the Russian market, operating for decades and recommended by experienced installers. When distributing places in the ranking, the following were taken into account:

• price-quality ratio;
• customer reviews;
• presence in the assortment of the company additional elements and fastening systems;
• siding test results in independent laboratories.

Top 10 Best Siding Firms

10 U-Plast

Original decor
Country: Belarus
Rating (2019): 4.4

The Belarusian company U-Plast is one of the largest manufacturers of facade materials in the CIS market. The company purchases tooling and equipment for factories in the USA and Germany. Raw materials for the production of vinyl siding are predominantly European. Quality control at the company's enterprises is very strict, so the probability of marriage is minimal. The company produces several series facing materials, differing, first of all, in the type of relief. Timberblock siding imitates overlapping flat plank facade cladding, Spruce decor looks especially natural. The Stone House series is plinth panels"under the stone" with the original double lock, which avoids the use of vertical docking strips.

According to customer reviews, U-Plast siding demonstrates good value for money. However, the frost resistance of the panels leaves much to be desired: it is desirable to mount the facade at positive temperatures. The U-Plast company produces not only siding, but also everything you need for cladding, thermal insulation of the facade and drainage of water from the roof: together with the panels you can purchase full set for their installation, insulation system and drain. The company even offers specialized tool for cutting plastic.

9 fine-ber

Large selection of shades
Country Russia
Rating (2019): 4.5

Vinyl siding under the Fine Ber brand has been produced since 2001. The company's factories operate on American equipment, and the products comply with international standards ASTM quality. Sading is available in two versions: Standard (ship timber) and Blockhouse. The assortment of the company also includes facade panels with decor imitating natural stone and spotlights. The choice of colors is wide: there are pastel, natural shades, as well as a collection of rich, dark decors.

The first batches of siding produced by the company began to cause consumer dissatisfaction with poor UV resistance, especially dark shades. Therefore, the company's technologists have made great efforts to improve the light fastness of products. And they succeeded - laboratory tests at the research center Russian Academy Science "Polysert" proved that 2000 hours of heavy-duty light radiation does not change the color saturation of the siding.

8 Profile Vox

Extremely durable and frost-resistant siding
The country: Poland (Produced in Russia)
Rating (2019): 4.6

This company has been present on the European market of facade materials since 1992. Her credo is to provide customers with the most convenient installation and comfort during the operation of siding using innovative technologies. In the assortment of the company as a regular vinyl cladding good quality, as well as several premium lines. The KERRAFRONT series is a two-component siding with a particularly strong outer layer and a foamed inner layer, which has increased mechanical strength.

The MAX-3 line features a special development of the company - a three-layer material consisting of a durable decorative coating, soft inner layer and thermostable substrate. This design guarantees the special resistance of the siding to temperature extremes and mechanical damage. Customers like the great look and variety of panel decors, as well as the ability to purchase everything for facade works in one place: the company produces material for finishing the plinth and spotlights.

7 TEKOS

Excellent protective coatings
The country: Belgium (produced in Russia)
Rating (2019): 4.6

Tecos, whose production facilities are based in the Tver region, is part of a large international group of companies TECO, headquartered in Belgium. Therefore, it is not surprising that the company was one of the first to bring an innovative development to the Russian market - vinyl siding with acrylic coated. This technology makes it possible to produce facade material with excellent fading resistance at a cost that is only slightly higher than the price of classic vinyl.

According to customer reviews, Tekos siding retains color perfectly, even its dark varieties do not fade. For more better protection facade from ultraviolet radiation, the company offers customers its unique development - ProVinTec siding varnish. In addition to increasing the chemical strength of the facade surface, this tool increases its physical strength which reduces the chance of chips and scratches.

6 grand line

High impact strength
Country Russia
Rating (2019): 4.6

This company produces a fairly wide range of various building materials, including metal and vinyl siding. The company is characterized, first of all, by a serious scientific approach to product quality. In order to test their facade material in conditions closest to real operation and to test the SUNPROOF GL UV protection technology, the company's engineers conduct full-scale experiments at open test sites in the Kaluga region and Krasnodar Territory. Siding samples that have been exposed to everything since 2014 natural influences at these test sites, show no visible color changes.

The excellent shock resistance of siding deserves attention. High Performance durability is provided by the SHOCKPROOF GL system. The average value of impact energy that the company's vinyl plastic can withstand is 10 J, at the level of the best American samples, while the standard requires only 7 J. grand line three lines of vinyl siding: Tundra, Classic and Acrylic (panels with a particularly resistant surface). The company provides a 50-year written guarantee for its products, subject to proper installation.

5 FOUNDRY

Best Design
Country: USA
Rating (2019): 4.7

This company produces facade panels for those who most appreciate individual design. Siding is very practical, durable and comfortable material, but its popularity leads to the fact that many houses look like twins and differ from each other only minor details. Designers and engineers of TAPCO GROUP, which produces FOUNDRY siding, have done their best to develop an unusual facade material that is as easy to install as classic cladding panels. The visiting card of the company is the collections "Schepa" and "Dranka". The texture of the plastic is chosen to create the illusion of a roughly sawn wood, and the color transitions of natural shades emphasize the relief.

The most important technological advantage of FOUNDRY siding is that it does not require vertical connecting elements. The facade turns out to be seamless and completely individual - for 14 meters the pattern on the panels is not repeated. Another advantage is the excellent fire resistance of FOUNDRY products. Thanks to a specially selected polymer composition, the siding of this company has a fire safety class A, which corresponds to Russian standard G1. The only drawback that the front panels of the company have is the high price.

4 Nordside

Optimal price-quality ratio
Country Russia
Rating (2019): 4.7

Production of vinyl siding by Nordside is organized in St. Petersburg. The company has been operating on the Russian market for 16 years and has proven itself as a reliable manufacturer that takes the quality of its products seriously. Nordside facade materials are specially adapted to the harsh Russian winters and are resistant to fading. The company's assortment includes several successful lines of siding of various shades and textures: "Karelia" and "Classic" are distinguished by light, pastel colors, and "Lapland" - more saturated colors.

The company's products are ISO certified, production is carried out under quality control Finnish company Adytum Oy. The owners of houses sheathed with this siding are especially pleased with the frost resistance of the panels, and the most popular color among domestic buyers is sandalwood. In addition to vinyl facade materials, the company also offers drainage systems and spotlights, so consumers have the opportunity to complete the entire exterior decoration of the house in the same style.

3 Alta Profile

Best Selling
Country Russia
Rating (2019): 4.7

The Russian company Alta-Profil is trying to meet the needs of customers in terms of pricing: the cost of vinyl and basement siding of its production is one of the lowest on the market. At the same time, the color scheme and the choice of textures are the richest. The line of foamed siding Alta-Board deserves special attention - this is a facade material with an increased sound insulation coefficient, increased strength and excellent decorative qualities. According to customer reviews, the Economy series is prone to rapid color loss under the sun, but dark colors older lines outperform competitors in UV resistance.

Another advantage of the company is the fact that, in addition to siding, it also produces a system for its fastening of its own design, elements for organizing a drain, drainage, as well as roof coverings. Thus, the buyer can get the whole complex technical solutions for exterior decoration of the building, which saves time and money. It is the combination of excellent service and reasonable price- the reason that Alta-Profile siding is the leader in sales in Russia.

2 Mittens

Best color fastness
Country: Canada
Rating (2019): 4.8

Canadian company Mitten has been manufacturing vinyl siding for 60 years. The experience gained over the years and scrupulous attitude to product quality allow the company to give a 50-year written guarantee for all its facade materials. Special attention the company's technologists pay to ensure the panels' resistance to ultraviolet radiation: even the dark colors of the Sentry Mitten line will retain their color unchanged for at least 25 years.

The shades of Mitten vinyl siding are specially selected to look as natural as possible on the facade of the building - they are complex, pastel and natural. The surface structure imitates cedar wood. The thickness of the panels reaches 1.2 mm, and the strength is one of the highest among competitors. A very serious product quality control system has been introduced in the production, so marriage and color sorting are excluded. The cost of siding, of course, is quite high, but given the excellent performance characteristics, it is fully justified.

1 Dock

Buyers Choice
Country Russia
Rating (2019): 4.9

This company began its work on the Russian market of facade materials in 2005 and quickly became one of the largest manufacturers of finishing panels. The company offers customers vinyl and basement siding with a wide colors and a wide range of accessories. The company's plant is located in the Moscow region, but all equipment and raw materials are purchased in Germany, and the quality control system in production is distinguished by true German meticulousness. Buyers have the opportunity to purchase not only siding, but also to order its installation, therefore it is not surprising that Döcke constantly occupies the top lines in the ranking of the most successful facade panel manufacturers.

The company produces three series of vinyl siding: Standard, Premium and Lux. All of them are of excellent quality plastic and color fastness - the company gives a guarantee of 50 years for its products. But there are many more colors in the Premium line, as well as a reinforced hurricane lock, which allows such siding to be used in areas where strong wind- a frequent occurrence. Lux is a design series that mimics texture exactly. valuable breeds tree. Thanks to an extensive network service centers the company provides its customers fast delivery products and wide selection decors.