How to close the sewer pipe in the bathroom. Cap of invisibility, or how to close the pipes in the bathroom with ceramic tiles. Detailed description of masking options

In any room of the apartment where water is supplied, there are a number of pipes that, by their presence, spoil the overall picture of the design. Therefore, in each project of an apartment or house, builders and designers use different techniques to hide pipes and communications.

How and why to hide pipes in the bathroom

So why hide pipes? The answer is simple.

From a purely aesthetic point of view, you don’t want to see plastic or metal pipes in a luxurious bathroom lined with, for example, Italian tiles.

But, in addition to beauty, one should not forget about practicality, and therefore everything must be done so that the pipes are not visible, but at the same time, easily accessible in case of problems with water supply or sewerage.

Competent disguise of economic communications sets itself such a goal - beauty and functionality.

How to hide pipes in the bathroom

There are four objects in the bathroom that require piping:

bath;
wash basin;
toilet;
washing machine.

And each of these objects require a separate water supply and sewerage. Therefore, the placement of all plumbing objects, which they all are, needs to be thought about in advance.

It is ideal at the stage of reconstruction of the premises to think over everything in order to competently, correctly and conveniently conduct all communications to them. These issues should be discussed with the builders and the designer if you are not doing the project yourself. Only in such a tandem can one understand what, how and where to place it correctly.

After you have figured out where and what you will place, you need to decide how exactly you want to hide the pipes. There are several options.

INSTALL THE PIPES INTO THE WALL

Installing pipes into the wall is the most aesthetically accurate method. From a practical point of view, pipes embedded in the wall become practically inaccessible.

This method will require a lot of effort to implement it, because in order to hide the pipe in the wall, you need to drill special grooves and lay pipes in them. You will also need holes for wider sewer pipes.

Please note that for of this type gaskets fit only polypropylene, plastic and copper pipes. The method by which pipe joints need to be connected is welding or soldering.

There is one more trick - before laying pipes, provide them with thermal insulation using pipe insulation. It will protect the pipes from condensation when they are already inside the walls, and will also allow the pipes to expand, which inevitably happens with any pipes over time.

When mounting pipes into a wall, ensure that you have access to at least the pipe joints. Otherwise, if you need to get to them, you will have to break the walls. There are a large number of options for doors and hatches that are built into the wall in order to provide access to communications.

Interesting solution for the bathroom - it was placed on an elevation, in which all the pipes were hidden, and a hatch for communications was brought out on the side. Beautiful, practical and comfortable

BUILD A SPECIAL PIPE BOX

A special box for pipes - the method has taken root very well in many bathrooms in Russia. And this is not surprising, because the box, on the one hand, looks like a closet, and on the other hand, it does not block access to pipes.

Also, the boxes have several significant advantages over the same mounting in the wall - large-sized, large pipes can be hidden in it, for example, like a sewer riser.

In addition, the box allows you to place a water heater and shelves inside, on which you can store household items and products for washing the bathroom and toilet. Also, this method is just perfect for a bathroom in which all the pipes are behind the toilet along the wall.

The pipe box can be made from drywall, chipboard panels.

As for chipboard and wood, the first should only be moisture resistant, and the second should have an impregnation that will protect the wood from moisture.

It is best to first change the old pipes for new ones so that they do not spoil the box due to condensate. Or at least put an insulating cover on the pipes, which will prevent it from forming.

The box has one significant drawback - in the event of a leak or other problems, you will have to disassemble it all, so you need to take care of the quality of the pipes and their connections in advance so that you do not have to re-do repairs later.

HIDE COMMUNICATIONS IN FURNITURE

It is just as convenient to place pipes in furniture as in a box. Visually, nothing is visible, but always at hand and within easy reach.

But in the case of pipes in furniture, you need to be sure of the quality of the pipes and the joints with which they were connected. Otherwise, the cabinet or cabinet is damaged and cannot be restored. Therefore, you have a choice - either change old pipes for new ones, or leave them in open form.

Increasingly popular in recent times idea - hanging cabinets for the washbasin. Very fresh and stylish

In this case, it was possible to combine three in one. In one pedestal, they managed to immediately place pipes to the sink, toilet bowl and, along the way, hid communications for the shower cabin

FALSE CABINETS OR CURTAINS TO COVER THE PIPES

False cabinets or curtains to cover pipes are more decorative. After all, it is convenient in that it does not require a lot of costs and time for its implementation.

All you have to do is choose your favorite curtain and hang it in the frame of the washbasin.

This solution looks very cute and is ideal for a shabby chic or country style kitchen. And besides, in the event of a pipe leak, you can immediately notice the problem and fix it.

A door with false drawers, behind which the washing machine is actually hidden along with all communications. Original and comfortable

So, we have examined 4 simple and affordable ways with which you can easily hide water and sewer pipes away from the eyes of residents and guests of your home.

By following simple rules for the installation and quality of pipes, boxes and boxes will serve you for many years without requiring replacement and repair.

No matter how original and stylish the design in the bathroom is, the whole effect can easily come to naught. Blame the pipes, which are very conspicuous. To save the situation, you need to remove these communications away. Let's look at how to close the pipes in the bathroom so that there is access to them for after-sales service and elimination of accidents.

Selection of materials and requirements

First and important criterion- small mass. The material should be chosen in such a way that it is not necessary to construct heavy frame structures. fit wooden slats or aluminum profile.

Moisture resistance is also important. Water in the bathroom is a common thing. Everything that will be used for finishing should not be subject to the damaging effects of moisture. Preference should be given to such materials that will not absorb moisture, as well as change their shape in the presence of water on the surface.

Resistance to various kinds of chemical influences is important. For cleaning in bathrooms and toilets, household chemicals are used. When performing general cleaning, often chemical treatment subject all surface elements without exception. Therefore, facing materials should easily withstand contact with household chemicals.

Hidden pipes in the bathroom and bathroom - it's always the right decision. The box can be made of drywall, MDF, plastic panels. You can also apply. They have a large selection of textures and can accurately imitate brick, wood, mosaic.

Before hiding communications, you should check their reliability. If you close the pipeline, in which there are even minor defects, the structure will soon have to be hastily dismantled.

How to choose a method of masking utilities

There are many ways to close the pipes in the bathroom. Options vary depending on the shape of the structure and the materials used. Let's look at the most simple and popular solutions.

Drywall box

Be sure to purchase drywall, which is designed for use in wet areas. It differs from conventional analogues in the presence of a special coating. The sheets are impregnated with impregnated and antifungal compounds. Moisture resistant differs in color from ordinary drywall. It can be distinguished by the green tint of the surface.

A frame made of a rack profile will be used as the basis for the future box. Profile size - 27 x 60 millimeters. Guides will also be used. Their size is 26 x 27 millimeters. The supporting structure is built first, and already cut-to-size plasterboard sheets are mounted to this base.

Stages of making a box

First of all, mark the walls and floor. Having determined the most protruding point of the pipes on the vertical wall, you need to retreat from it about 3-5 centimeters and draw a line. The same principle is used when marking horizontal surfaces.

Then, rails are mounted along the line with dowels. To do this, use a guide profile. To these rails are attached crossbars from the rack profile. The parts are connected with crabs at a distance of 15-20 centimeters.

You need to create cushioning for the structure. To do this, in places where it is adjacent to the pipes, a special tape is laid. Next, the finished structure is sheathed with plasterboard strips. When installing sheets, you need to follow the front side. She must be outside. In the process of screwing self-tapping screws, it is necessary to recess their hats into drywall.

After that, you can proceed to the manufacture and decorative design doors. A technological hatch is cut in the box. To hide it, the door is seated on hinges. Then the body and the door, together with the hinges, are finished.

Collapsible rubbed with a grater, plastered with careful sealing of all seams. To enhance the strength of the finished box before filling, it is recommended to equip the corners with a perforated corner. In order for the putty to fit better at the joints between the sheets, the edges of the drywall are chamfered. If this design will hide the communications of the heating system or hot water supply, then holes should be made in the upper part - through them warm air. In case of water leaks, an additional small hole is made at the bottom of the structure. This is necessary in order to quickly detect a leak and timely repair pipes in the bathroom.

In the process of fixing the profiles to the floor surface, the slightest displacement should be excluded. Any, even a small error affects the quality of the design. She will look ridiculous. If the floor and walls are tiled, care must also be taken during the drilling process - with inaccurate actions, the tile can crumble and crack. This is especially true for ceramics. Use only special drills, not universal ones.

Use of ceramic tiles

This process is very similar to working with drywall. But to hide the pipes under the tiles in the bathroom, it will take much more effort. The main advantages of ceramic tile boxes: beautiful appearance and good moisture resistance. The design of tiles easily fits into any design, while communications will be invisible, formed additional area for storing useful household items. The finish can be matte or glossy. The shade of the tile should not differ much from overall design bathroom. Only in this way will the box fit well into the interior.

Let's look at how to close the pipes in the bathroom with tile trim. As a basis, metal or wooden frame. When working with wood, all elements are pre-treated with water-repellent compounds. This is important because such material immediately "leads".

To make things easier and prevent possible mistakes in the process installation work, it is better to make an approximate design sketch with all important dimensions. Also, it will not be superfluous to designate the places for fastening the elements of the box. This will greatly facilitate the installation process.

Manufacturing steps

The first step is to mark the zones where communications take place. Then a frame is made from a wooden lath or a metal profile, which is then securely fixed to the surface of the floor, walls and ceiling. After that, the base is sheathed with any available material. It can be moisture resistant plywood or chipboard.

The front part of the structure should have a hatch - repair or installation of pipes in the bathroom will be much easier. cladding material (in this case Chipboard or plywood) is pasted over with a reinforcing mesh. Next, ceramic tiles are laid on the grid. The service hatch door must also be pasted over with a mesh. The seams between the tiles are rubbed, and then covered with mastic against the fungus.

Expert Ideas

The design and shape of the frame largely determines how the pipes are laid in the bathroom wall. With the help of a ledge, you can hide the communications that take place in the combined bathroom. In this case, the built-in drain tank is also hidden in the box.

You can hang the design at the level of the sink. This solution will allow not only to hide the pipes from the eyes, but also provide an additional place where you can store household chemicals and other necessary things.

As doors, you can use ready-made plastic products. Their range is quite wide. The presence of an inspection hatch is very important if the pipeline has meters, valves or other controls. Otherwise, you will have to disassemble the structure in order to check the meter readings or turn off the water.

We use plastic panels

Bathroom decorative panels are simple and affordable way, with which the pipeline is hidden. Due to the wide colors These panels can be used to create designs for any interior. Convenience also lies in the fact that each element of the panel is easily interchangeable. This greatly simplifies tasks when partial disassembly of the structure is needed.

The only disadvantage of plastic bathroom panels is poor fire resistance. Although most manufacturers guarantee that in the event of a fire the product will only smolder, the smoke is no less dangerous for the human body.

Installation of panels is carried out on a ready-made frame. The same metal profile is used as the basis. Before starting the sheathing of the frame, a starting molding is attached to it with the help of self-tapping screws. To hide the head of the screw, fixing is done through the shelf, which is covered by the next panel.

Cut blanks are brought into the molding. They are strung on each other. Each panel should slide in tightly to the end. And for reliability, its free side is fixed with self-tapping screws. When joining adjacent panels, the edges should fit tightly into the locks already installed panels. At the end of the installation work, an external molding is installed. They also get off the junction of the frame with the surface of the floor or ceiling.

Here's how to close the pipes in the bathroom with plastic panels. In fact, if you have certain skills, it is not so difficult. The main thing is to be careful and careful.

We hide the pipes radically

You can hide communications in a more crude way. They are walled up right into the wall. So you can hide not only communications, but also add some free space to the bathroom or bathroom. It should be taken into account that according to building codes not allowed to ditch brick partition wall and a thin-walled partition in panel houses.

In addition, this work is quite difficult, the main drawback is the impossibility to get access to the pipes in the event of an accident in a short time. When choosing this option, the risk of leakage should be taken into account.

There should be no joints in the wall. Fittings and pipes made of polypropylene are used for installation - they are easily soldered into a single whole. For hot or cold water supply, the strobe must be equipped with a sleeve made of foam rubber or thermoflex. These are the basic rules for laying these communications in the wall.

Conclusion

So, we figured out how to close the pipes. As you can see, you can perform this operation different ways. Upon completion of the work, the interior in the bathroom will be truly complete and harmonious.

Agree, even the most original design solution bathroom interior design can come to naught due to unsightly engineering communications. You can save the situation by skillfully disguising unpresentable elements.

At the same time, it is not necessary to be a virtuoso in the construction business - it is enough to choose finishing and Construction Materials, prepare tools and stock up free time.

We will show you how to hide the pipes in the bathroom, while providing access for system maintenance. After studying our instructions, you can independently transform the bathroom, saving money on the services of plumbers.

The first thing to do before you start sealing the pipes in the bathroom is to decide on the appropriate material.

When choosing a material for hiding pipes in the bathroom, it is not entirely correct to be guided by the purely aesthetic component of the products.

Criteria to consider when choosing a material:

lightness. So that the design does not clutter up the already limited space, it is necessary to select materials for fixing which there is no need to build heavy frames. You can use ordinary wooden slats or metal profiles.
moisture resistance. High humidity in the bathroom is a common occurrence. The materials used in its arrangement will certainly be influenced by it. Therefore, preference should be given to those options that do not absorb moisture and do not deform when it settles on the surface.
Sustainability to the effects of chemicals. Without the use of household "chemistry" to maintain cleanliness in the bathroom is quite problematic. During general cleaning of the premises, all vertical and horizontal surfaces are subject to processing. Therefore, the materials used for their lining must painlessly endure direct contact with household cleaning products.

Great for hiding communications in the bathroom decorative MDF plates, Wall panels from plastic, sheets of moisture-resistant drywall.

in cladding wall structures decorative hardboard slabs covered with a layer of melamine laminate and gypsum 3D panels will look interesting

Various textures popular in last years gypsum 3D panels are able to imitate wood, brick, mosaic and create on the walls whimsical patterns.

Important point: regardless of type facing material before closing the pipes, you should make sure that they are reliable. By closing a pipeline that has defects, there is a high risk that in the near future it will be necessary to disassemble the structure in an emergency manner.

Possible ways to disguise

There are many options that suggest how you can hide the pipes in the bathroom. They differ in the form and purpose of the erected structure, as well as the types of materials used. We offer to consider the most popular among them.

Image gallery

The steps for masking communications during the installation of a hanging toilet in a mixed bathroom will be presented by the following selection of photos:

Image gallery

If desired, the box can be completely brought out to the level of the sink. Such a solution will make it possible not only to hide all unsightly communications, but also to provide additional space for storing bottles with household chemicals.

To cover the inspection hatch, it is convenient to use ready-made plastic doors, which are on sale in a wide range of colors and sizes.

The arrangement of the inspection hatch is necessary condition if the part of the pipeline to be decorated is equipped with valves, meters or any other items of equipment.

Masking pipes with tiles and mosaics looks appropriate in bathrooms, especially if they are made of the same material.

Method #3. Closing with plastic panels

Decorative plastic panels are a simple and at the same time inexpensive option for hiding communications. A wide variety of types, colors and options presented on the construction market allows you to create a design that harmoniously complements the already equipped interior.

Structures made of plastic panels are also convenient in the sense that all their elements are interchangeable - this greatly simplifies the task if it is necessary to partially dismantle the structure

The only drawback of plastic panels is the low fire resistance. Although many manufacturers guarantee self-extinguishing products, they are no less afraid of smoke than open fire. Therefore, in the bathroom, the pipes of which are decorated with plastic panels, you need to beware not only of fire, but also of ordinary smoking.

Installation of plastic panels is carried out on a pre-assembled frame, the basis for the manufacture of which are all the same metal profiles. Before sheathing the frame, first a starting molding is attached to it with screws.

Often, in the construction of a frame for fastening plastic panels, they prefer to use lumber. They are easier to cut and process than a metal profile:

Image gallery

Very many, planning high-quality and modern renovation in the bathroom, be sure to pay Special attention pipelines. The first question that arises at the initial stages of planning is how to hide the pipes in the bathroom in such a way that they do not take up free space and at the same time are hidden from view as much as possible. In this article we will answer this question and show examples in the photo.

Before closing the pipes in the bathroom, it is necessary to decide in what way they will be closed, while taking into account the features of the building, the size of the room and financial possibilities. The first step is to decide what type of wiring will be, open or closed. Only then can you decide whether to hide the pipes in the bathroom in the walls, in the floor screed or in special boxes from drywall.

Choosing the type of wiring

Before you remove the pipes in the bathroom, you need to choose the type of wiring based on the number of consumers in the room and the distance between them. To date, there are two main types of wiring:

The collector type of wiring is used in cases where many consumers are installed in the bathroom. So that they do not suffer from lack of water or pressure as a result joint work, each of them is supplied with a separate line from the main distributor. Hiding pipes in the bathroom with this scheme requires a large number places, since the system is quite voluminous.

The sequential scheme is used in small rooms with several consumers, to which water is supplied from a common line through separate branches. So when the valve in the washbasin is open, the pressure in shower mixer decreases significantly if it is located farther down the pipe. Such wiring takes up little space and open pipes in the bathroom can be easily hidden in the wall or under the screed.

Hidden or open wiring

At this stage, you must choose whether to close the pipes in the bathroom tightly or leave them open. If the room is spacious and allows you to arrange open wiring in special boxes without a noticeable loss of free space, then this type of wiring is usually used. But if the bathroom has limited space, then here we hide the pipes in the bathroom in such a way as to free up the maximum usable area. The choice of wiring depends on which pipes will be used in the plumbing of the room.

Important! For styling concealed wiring walls need to be chipped. However, the breach of integrity load-bearing structures Absolutely forbidden. Therefore, before hiding the riser in the bathroom, you need to make sure that the wall is load-bearing.

It is also worth considering that not all pipes are able to provide reliable connection for many years and in this case, before blocking the pipes in the bathroom, it is necessary to ensure Free access to the connection areas for technical inspection or repair in case of leakage. For hiding under a screed or finishing materials, only suitable poly propylene pipes where the connection is through hot soldering. Seal pipes in the bathroom from other materials with crimp or threaded connections Not recommended.

Rules for laying hidden wiring

In order for the renovated bathroom to look as spacious as possible and all of its plumbing elements work perfectly, it is necessary to follow a number of basic rules when planning wiring:

use as few connections as possible when drawing up a diagram and laying;
when soldering polypropylene pipes, the material of the pipes themselves and connection fittings must be the same;
before hiding the pipes in the bathroom, be sure to provide inspection holes at the connection or installation points additional units for quick service access.

Important! If we hide the pipes in the bathroom using any type of wiring, it is advisable to provide hot and cold pipes with insulating materials to prevent condensation.

Options for masking pipes in the bathroom

To date, there are several main types of masking pipelines and sewers from the eyes. The most common are:

laying highways in a concrete screed on the floor;
disguise using furniture elements;
laying highways in the wall;
boxes and niches made of drywall or wood.

Each of the options answers the question of how to hide communications in the bathroom and below we will consider them in more detail.

Laying in concrete screed

This wiring method is the most practical and easy to implement, since it allows you to lay highways along the shortest path. Before you wall up the pipes in the bathroom under the screed, you need to consider what will lie on top floor tiles and access to highways will be completely blocked. Therefore, it is necessary to use only polypropylene pipes with thermal insulation so that condensation does not form and the hot main does not lose heat. Masking pipes in the bathroom in this way is carried out in cases where the walls in the room are load-bearing and their removal is impossible.

Important! If an electric floor heating system is used in the room, then before closing the riser in the bathroom with a screed, the lines must be laid around the perimeter of the room so that the pipes do not intersect with heating elements gender.

It is also worth remembering that propylene pipes tend to expand when heated. In order to provide sufficient space for expansion, before hiding the pipes in the bathroom, in addition to thermal insulation, a corrugated sheath is installed on the main, which gives enough space for thermal deformation. Before covering the pipes in the bathroom with cement, you need to make sure that the thickness of the screed is sufficient to completely close the pipes and create flat surface under tiling.

Closing pipes with furniture

The use of furniture elements as pipe lining in the bathroom is also a very common camouflage option. If part of the line is laid in a screed, and the outgoing pipes exit vertically along the outer part of the wall, then it is enough to purchase lockers desired height and before covering the pipes in the bathroom, remove back wall and cut holes for pipes. After that, the cabinet leans against the wall and covers the visible part of the highway. However, this option cannot always be implemented beautifully, and usually bare pipes in cabinets quickly collect condensate. In such cases, before closing the riser in the bathroom with furniture elements, it is necessary to additionally insulate the pipes.

Installation of wiring in the wall

This does not mean sewing pipes in the bathroom in finished wall the method of chipping, and the installation of highways in the wall during the construction of a house or redevelopment of a room with the construction of new partitions. In prefabricated panel walls, often the thickness of the slab is not sufficient for complete pipe laying. Before you hide communications in the bathroom during panel construction, you need to make sure that the working wall is not load-bearing. AT load-bearing walls only vertical cutting is allowed.

During the construction of walls or the construction of new partitions, before sealing the pipes in the bathroom by laying in the wall, polypropylene pipes with thermal insulation and corrugated protection are also used. Pipes are laid in advance in the space between the bricks and filled with mortar so that voids do not form.

Boxes and niches for closing pipelines

Closing the pipes in a drywall bathroom is the first solution that comes to mind when other masking options are not possible, since this option is the fastest and most convenient to implement. Creating a box is the simplest, fastest and least expensive idea, but it has a significant drawback. The tub for the pipes in the bathroom occupies extra space and especially in small rooms it is very noticeable.

Before closing the communications in the bathroom with plasterboard or wood, a special frame is created from aluminum profiles or wooden bars. Then this design is sewn up with plastic panels, drywall, ceramic tiles or decorative wood according to the design of the room. The pipe box in the bathroom allows you to create inspection hatches in the right places through which technical inspection or repair of communications will be carried out.

Important! If you already have to create such structures in small rooms, then before sewing up the pipes in the bathroom, carefully consider the design of the box and try to use it inner space for storage household chemicals, mop, broom and other household items.

Use of decorative screens and overlays

Before disguising the pipes in the bathroom, you should pay attention to such modern products as decorative screens or overlays that allow you to hide pipes and decorate the interior of the room at the same time. Screens for pipes in the bathroom are ear-ready frames different sizes with guide skids along which plastic or glass doors move. The price of such products is not high and they are mounted very quickly. Their use significantly speeds up the process and they are mainly used as inspection hatches for important nodes plumbing and providing quick access to them.

Also, pipes in the bathroom can be closed with special decorative overlays, which are made mainly of plastic or wood. Pipe linings in the bathroom can have different color options or imitate materials such as stone, marble, wood. Such products will good decision for those who do not know how to hide the riser in the bathroom quickly and beautifully.

This material can be used as a guide for those who still cannot decide where to hide the pipes in the bathroom, saving space or simply updating the appearance of the bathroom.

How to hide pipes in the bathroom, close the riser in a box

How to hide pipes in the bathroom. Selecting the type of piping. Description of options for hiding communications in the bathroom.

How to hide pipes in the bathroom

Conducting repair work in the bathroom, you will most likely want to know how to hide water and sewer pipes. This will help increase the aesthetics of the room as a whole. The complexity of such an event lies not just in the capital concealment of all communications from prying attention. This must be done in such a way as to leave them available for ongoing revision or repair in the event of an accident.

Project stage

To decide how to hide the sewer pipes in the bathroom, you should carefully analyze and study the communications layout. It is very important to draw up an accurate project, because in apartment building all systems are interconnected. Because of this, if communications are not properly connected, problems may arise for both you and your neighbors.

To correctly hide the pipes in the bathroom, you need to decide in advance where the connection points for plumbing fixtures, possible branches and turns of the pipeline will be located, and mark the wiring diagram right on the wall.

You can also draw a schematic plan for the location of communications on paper. It is important to consider the scale, but it is better to clearly indicate the dimensions.

When planning to hide pipes in the bathroom, it is necessary to lay them in the shortest route and with a minimum number of bends and turns.

Communication masking methods

Pipes located horizontally are hidden under the screed, and risers (pipes running vertically) are hidden under the plaster. This method involves carrying out concomitant construction works, such as strobe device, applying a layer of plaster, laying tiles.

Communications can also be hidden by building a system of moisture-resistant drywall or OSB. This is done in this way - a special metal profile is attached to the wall, to which sheet material is screwed using self-tapping screws.

You should also not neglect the insulation - before fixing the sheets of drywall or plywood, it is recommended to lay a layer of foam on the wall or mineral wool. After the structure is assembled, it can be pasted over with tiles.

You can also assemble furniture structures in the form of shelves or cabinets that will help with disguising pipes. In addition, there will still be enough space inside to store items necessary for the household, for example, household chemicals.

In the end, pipes can simply be painted over with paint, decorated with artificial lianas, pasted over with multi-colored mosaics or stucco moldings from foam - in general, you can do everything that your fantasy tells you.

You need to remember to exclude the method of simply tightly hiding the places of threaded connections, fittings, valves and meters. Access to them should be easy.

Basic rules for hiding communications

To give the bathroom aesthetics and increased comfort, as well as to free up as much space as possible, it is advisable to mask all pipes if possible. There are a number of rules, the implementation of which will enable pipelines to function for a long time and reliably:

number of connections should be minimal;
fittings, such as fittings, squares should be placed from the same material as pipes;
valves and inspection windows must be equipped special hatches for access to the main devices of pipelines;
it is desirable to wrap the pipes waterproofing layer to avoid sweating, i.e. condensation.

Detailed description of masking options

There are several ways to hide the pipes in the bathroom under the tiles. Photos, examples of which you can see in the gallery of our site, clearly demonstrate this.

To hide pipes under a screed or plaster, professionals recommend using only polypropylene or copper pipes not equipped with threaded connections, but firmly soldered or welded. To choose the most suitable option for you, you need to familiarize yourself with the features of each of them in detail.

We hide communications in a coupler

This hiding method horizontal pipes the most aesthetic, as they will be hidden so that it will be almost impossible to find them.

Before laying the pipes are placed in a special corrugated hose. They need to be laid along the shortest route, after which a layer of cement or concrete screed. The layer thickness should be 2-3 cm above the pipes. After the screed has completely hardened, it is laid on the floor top coat, such as tile, linoleum or laminated panels.

It will be useful to remember that before the solution has completely hardened, the bathroom cannot be used, since hot water passing through the pipes can lead to cracking of not completely hardened concrete.

Tunnel device

For the manufacture of niches in which communications are laid - the so-called strobe - it is reasonable to use an angle grinder or grinder, with a victorious or diamond disc.

Next, you need to make two parallel cuts at a distance corresponding to the cross section of the pipe, after which, using a chisel and a hammer, remove all excess concrete between the cut grooves. A manual process will become long and tedious, so it is wiser to use a hammer drill with a chisel attachment.

Hoses with pipes are placed in the finished grooves, after which they are covered with plaster. From above, you can lay the finishing floor covering.

In places of threaded connections, valves or fittings, it is necessary to mount inspection hatches to provide access to them when the need arises.

The advantages of this method of masking pipelines include their complete concealment under the floor. However, this method has its drawbacks. Access to the pipes in the event of an accident will be limited by the size of the inspection hatch. In the event of a breakthrough, it will be very difficult to locate its location. To do this, you will need to completely tear off the decorative coating.

Therefore, the pipes laid in the walls should only be of high quality. In this case, many problems can be avoided.

Plasterboard constructions

Consider how to close the pipes in the bathroom with drywall. This is one of the most common ways to mask a sewer riser. Boxes of several levels will be an excellent solution that allows you to hide communications, visually increase the space, while at the same time getting nothing limited access to the pipeline. The design consists of galvanized profiles fixed to all planes of the room, to which drywall sheets are screwed with special self-tapping screws. It is this material that acts as the basis for laying tiles.

It is important to take into account the need to equip these systems with inspection holes for control at the joints, valves, meters, filters.

Another method of masking pipes with drywall is the construction of an additional partition, the so-called false wall. To do this, you can apply another technology. Below is an example of how to hide the pipes in the bathroom with your own hands with plastic panels. As a rule, this method is used in large bathrooms.

Masking partitions can be straight and oblique. Oblique false walls are located at an angle relative to the bearing walls. They also need to be equipped with inspection hatches for access to communications.

Roller metal shutters

Installation of a roller shutter will completely solve the issue of gaining access to the pipeline. It can also be equipped with shelves for storing household items. In particular, it would be ideal to store household chemicals there. Since the roller shutters are locked with a key, you can not worry about the safety of the kids. Installation of this device will not be any particular problem, and it is easy to match the color to the tone of the tile.

However, such shutters may not stylistically match the interior design of the bathroom. In addition, they are made from rather unreliable materials, and the shutters can be easily crushed or broken if carelessly handled.

Masking pipes with furniture

One of the most convenient and functional methods of hiding pipes in the bathroom will be furniture systems. Well-chosen furniture will bring elements of luxury to interior design. As a rule, to hide communications in the bathroom, cabinet systems with shelves equipped with sliding or hinged doors are often used. This choice depends on total area bathroom and the location of plumbing fixtures in it.

Usually, laminated chipboard is used for the manufacture of furniture for bathrooms, and it must be moisture resistant. At the end of the installation, it is necessary to treat all gaps and joints with silicone sealant to protect the furniture from contact with water. Although chipboard is considered moisture resistant, it can become unusable from the constant influence of water.

Masking the water supply, sewerage and heating in the room with the help of furniture has a significant disadvantage, such as low resistance to water. Of course, manufacturers make all countertops and laminated boards for bathrooms moisture resistant, although, as a rule, this does not save furniture either - it quickly loses its attractive appearance.

This can be partially avoided if you regularly monitor the degree of wetting of the furniture in the bathroom. To do this, wipe it dry after each visit to the bathroom. In addition, it is necessary to regularly check the places where the silicone sealant is applied for deformation.

An important advantage of this method of hiding conductive communications in the room is high aesthetics, as well as functionality, since cabinets can be used as additional system storage.

In short, solving the problem of hiding pipes in the bathroom requires a thoughtful and planned approach. Since with improper installation of piping without water supply, almost all residents can remain in the riser at the entrance. To prevent this from happening, you should take into account all the nuances of such work and choose the most suitable method of masking for your bathroom.

How to hide the pipes in the bathroom under the tiles with your own hands

When renovating a bathroom, many are wondering how to hide the pipes in the bathroom under the tiles. A photo and description of all solutions to such a problem will help you with this.

Wall chasing

The ideal option is to hide the water pipes in strobes (knocked out furrows in the wall). However, few people know that in load-bearing walls allowed only vertical chasing no deeper than the occurrence of connecting reinforcement (violation of its integrity is not allowed). Horizontal strobes can significantly weaken the strength of the wall, so they are strictly prohibited. It is also unacceptable to lay pipes in reinforced concrete floors.

Horizontal gating of walls is allowed only if the wall is not load-bearing.

Any threaded connections.

Free access must be provided to water meters and stopcocks

Sealing with sand-cement mortar

Frame for a drywall box

In the event of a leaking pipe, removing the sheet of drywall and fixing the problem is much easier than gouging concrete. That is why the method of hiding communications with drywall sheets followed by tile stickers is the most common.

Profile UD (guide)

Attaching self-adhesive tape

Fastening profiles with direct hangers

The rack profile is inserted into the groove of the guide

The frame is assembled from wooden slats

Ready-made frame for the box, assembled from metal profiles

Drywall box. Bottom view

Drywall installation

To protect yourself from the appearance of mold, for arranging false walls and boxes in the bathroom, you should use moisture resistant drywall(with GKLV marking). Most often, these sheets are green color, but some manufacturers produce it in other colors.

Drywall to the profile is attached with self-tapping screws

Drywall can also close the pipes leading to the toilet

A ready-made inspection hatch can also be bought at a hardware store.

The original locker will not only close the pipes, but also become a storage place for household supplies

How to hide pipes in the bathroom in the wall, under the tiles

From the article you will learn several ways to hide the pipes in the bathroom in the wall or under the tiles. Added a lot of photo and video material.

ABC of repair

Build your own home from foundation to roof

How to hide pipes in the bathroom

Photo 1 - Hiding pipes in the bathroom

Sewer and water pipes, being in plain sight, can spoil even the most original design so you need to hide them.

Rules to be observed when hiding pipes

To make the bathroom look stylish and at the same time all systems work properly and for a long time, you need to follow a few rules:

Use pipes with a minimum number of connections, which is ensured by competent wiring and correct placement equipment;
Use connections that use the same material as the pipes. At the same time, the margin of safety should also be identical, or better, it would be higher.
To have quick and convenient access to taps, valves and other items of equipment during revision or emergency repairs special hatches should be provided.

Photo 2 - plastic pipes in the bathroom

To prevent the formation of condensate on the pipes, use insulating materials. If the pipes are planned to be hidden in the wall, such insulation will also allow them to expand freely, which is especially true for pipes with hot water.

Photo 3 - Insulating material for pipes

Several ways to hide pipes

If there is a need to hide communications in the bathroom, then there are several proven methods.

Masking pipes with furniture

Hide all communications behind hinged, or built-in furniture- the most simple, fastest, and at first glance inexpensive option. For example, if the pipes are mostly vertical, then you can buy a regular pencil case, right size. It remains only to remove the back wall and make the necessary cutouts on the panels at the top and bottom. The result is a cabinet in which you can put a lot of different things, among which there will be pipes.

Photo 4 - Masking pipes behind the nightstand

However, this method has a significant drawback. In the place where the pipes pass, always high humidity, and it is difficult to choose furniture that can withstand such a load for a long time. Can be refinished on all surfaces waterproof material but it takes a long time and is not cheap.

Installation of pipes in the wall

This method is convenient if the house is just being built or redevelopment is being done. To hide pipes in the wall you will have to ditch, however, if the walls are panel, then such work in the horizontal direction is prohibited. Quite often, the walls are not thick enough to perform such work.

Photo 5 - Installation of pipes in the wall

It should be remembered that metal pipes, as well as any communications with threaded connections, cannot be used for wall mounting. It is important to properly piping, and be sure to take into account tile thickness if cladding will be carried out. Next, you need to lay the insulation. It remains only to produce plastering work, close the pipes and can be lined.

Photo 6 - Pipes in the wall in the bathroom

Photo 7 - Pipes in the wall in the bathroom

How to use boxes and niches to mask pipes

The construction of the box can be considered one of the ways bathroom remodeling quite simple and convenient. Metallic profile of the desired shape, or several wooden bars of the required length and section, are sheathed with sheets of drywall, which needs subsequent finishing. It is easier and faster to build a box using plastic panels.

Photo 8 - Box for pipes in the bathroom

Niches for masking pipes are erected in a similar way, but they allow you to hide not only plumbing lines, but also washing machine, washbasin, etc.

Boxes and niches have a serious drawback - they occupy an area that in the conditions small room very important.

Closing pipes with a special screen

Currently, the choice of screens in stores is quite wide. It is a frame with two guides, to which plastic or drywall panels are attached.

Photo 9 - Screen under the bath photo

The cost of the screen is low, while it looks very original and attractive. In addition, it is easy to remove, which makes access to communications quite easy. The disadvantage is the same as that of boxes and niches - it takes a few centimeters of usable area.

Features of masking pipes with a plasterboard wall. Instructions for use

This option is easy to install, as well as low cost. Install plasterboard wall it is better in rooms that have not yet been inhabited, where the place of the partition is determined by the owner. This option for masking pipes is also suitable for large bathrooms.

The first step is to prepare everything necessary materials and tools.

Now you can start building the frame:

Photo 10 - Installation of a drywall box for pipes

Photo 11 - Mounting the pipe box

Now you can proceed to the sheathing of the frame with plasterboard:

Prepare blanks of the desired size. To speed up the process, this work can be done in advance;
Fixing sheets with self-tapping screws, the type of which is determined by the materials used. Their hats should not go deep;
All excess sheets must be removed with a saw or jigsaw. If its length is insufficient, then the joint should not coincide with the transverse crossbars.
Cut holes for the output of pipes and an inspection hatch;

Photo 12 - Mounting the pipe box

Photo 13 - Finishing the box with tiles

Installation of a drywall pipe box video

When choosing a way to hide pipes, you need to be guided by the size and style of the bathroom, as well as personal preferences and financial capabilities. You can use any of the above options, while no one limits you in creating your own method, which will be more interesting and practical.

How to hide pipes in a bathroom

ABC of repair Let's build a house on our own from the foundation to the roof How can you hide the pipes in the bathroom Photo 1 - We hide the pipes in the bathroom Sewer and water pipes

Communications in the bathroom or in the kitchen, like annoying relatives who spoil general form and reduce the level of comfort in the entire room.

It happens that the owners work long and hard to create a really beautiful and stylish interior.

However, pipes and risers treacherously strive to put all efforts in vain, standing out from the overall picture and attracting undue attention to themselves.

In addition to aesthetic dirty tricks, such details can spoil in another way, for example, cold pipes can significantly reduce the temperature in the bathroom and at the same time increase the degree of humidity in the room.

Due to the constant condensation that forms on them, which in turn will drip onto the floor and will need to be wiped regularly.

They will harmonize with general design while creating complete picture morning fees for your favorite work.

Ways to hide communications

There are several ways to accomplish the task at hand.

However, the simplest situation will be the one when the repair in the room is made from scratch and all the little things are taken into account.

The implementation of which can be thought out initially, so that later there will be no problems.

Installation under tiling

The plumbing in the bathroom must be done before the plaster is done. So that an even layer of plaster does not have to be made too thick, communications should be “drowned” in the wall, for which they make channels for pipes.

This is done elementarily - with light movements of the grinder, cuts are made according to the initially drawn scheme for parallel laying of the water supply. Depth and width are taken into account based on the relevant parameters of the pipes.

After the "cuts" are made, we proceed to stripping the resulting channels. This can be done with a chisel or puncher. The choice of tools depends on how much you love and appreciate your neighbors, who will undoubtedly appreciate the melodiousness of construction equipment.

It is worth noting that modern plastic communications will not require any additional thermal insulation, and after plastering the wall, it will be possible to proceed with the installation of ceramic beauties.

What about sewer pipes?

You probably already figured out that in this case it is unlikely that it will be possible to drown the pipe into the wall because of the huge diameter. We'll have to resort to less radical, but no less effective methods, namely decorative cladding, specific, eye-catching, areas of the bathroom.

As a rule, it will be necessary to make a frame, which is a box that frames the sewer section and cover it decorative material, similar to the one used for wall decoration.

The shape of the frame may be different, but for greater convenience it is better to use rectangular section boxes, at least for those sections that are located horizontally. For risers or vertical pipes, you can make a box with a round, semicircular or oval section.

Frame cladding

Similarly, you can do with the entire plumbing system. The frame can be installed on all surfaces, it will hide all the pipes, but in this case the area of \u200b\u200bthe room will decrease. If such an outcome is not terrible for you, then you can safely proceed.

However, it should be mentioned important detail like water pipe insulation. The fact is that even the most modern plastic products are not immune from the occurrence of condensation on them, even if not a significant formation of moisture, which can cause excessive dampness in a room where the humidity is already significantly increased.

To prevent the above destructive or at least unpleasant processes, it is necessary to wrap the pipes heat-insulating material, say flexible rubber or glass wool.

In order to finish (in a good sense of the word) frame, you should use moisture-resistant materials that, when faced with the water element, will not give up and withstand the onslaught, retaining their original appearance.

For such purposes, they will fit perfectly:

Plastic;
Textolite;
Styrofoam tiles (1-2 cm thick);
Ceramics;

With the exception of ceramics, all of the above is mounted on the frame using ordinary self-tapping screws, while the corners and joints are masked with decorative overlays that are mounted on silicone. To close the box with tiles, you first have to build a solid foundation.

To do this, you need to use a special mesh made of nylon or steel with a mesh size of 2x2 mm. Then the resulting surface is covered with tile adhesive and after a day, you can start laying the tiles, behaving at the same time as if there was no grid and the ceramics lay on an ordinary wall.