How to make a wooden deck. How to make a comfortable deck chair? Preparation and manufacture of a sun lounger

Do-it-yourself deck chair (drawings with dimensions will be provided in the article below), it is quite simple to manufacture. But before buying the material, it is better to calculate the amount of wood in advance, and the fabric is selected stronger.

Previously, during periods of scarcity, ordinary tarpaulin and an untreated dry board were used to homemade furniture such a format.

It was possible to meet a comfortable and thoughtful sunbed (aka a deck chair) only in places for recreation. Now everything is simpler, and almost for free, creating comfortable garden sliding furniture for yourself and your family is as easy as shelling pears.

Kinds

For the simplest reclining chair made of wood, aluminum or plastic, there is the following types or types:

1. Children's sun lounger.
2. Beach.
3. Country.
4. For a house or apartment.

The difference is always environment, and if at home you can put a compact sliding chair like a deck chair, then at the sea or by the pool there is always such furniture that is resistant to moisture (salt).

But to make it simple, convenient and inexpensive, let's consider just a simple type of deck chair on two frames, with a crossbar and a fabric back. This is a portable type of furniture for relaxation, so everyone can assemble the same sliding chairs for the whole family.

Self-manufacturing

Where to begin? Well, of course, with the size. What will be the manufacture, the deck chairs will only be stronger.

Drawings and dimensions

And you will need to assemble two frames of this format for one deck chair:

Which will give a simple design as a result:

Let's start like this:

1. Choose a pine board or timber. If it is not possible to bring / order, then we are looking for birch pallets. Now it's easier to get quality material. Any type of wood must be processed. Moreover, we plan, skin and paint before assembling into one whole. Already the second layer of paint or varnish can be applied at the end.
2. Next, we look at the drawing and notice that there are power elements. These are crossbars that necessarily crash into the frame. And for such a procedure, a hammer, chisel or carpentry power tool was created ( manual frezer, suppose). Here it is important to do as it was always in the stools of the Soviet period: fastening the "thorn-groove" to half the thickness of the frame bar. And everything will fall into place. It won't be easy to unroll.
3. The power bars on the frame are the same boards, but we attach a decorative or ordinary tarpaulin to them. Synthetic fabric will work too. But we make sure that it does not stretch, otherwise the fifth points will eventually go into the ground.
4. So, two frames are ready, and two stops on movable hinges. We assemble the structure together at the expense of bolted connections or special movable fasteners (the store will always prompt you with a choice).
5. Collected. The fabric remains. But it needs to be cut out. More on this later.

For simplicity, we give dimensions for the drawings.

1. Back. Frame. 1219x38x19 mm in the amount of two pieces. 610x38x19 mm one piece. 648x38x19mm is one joke. 610x64x19 mm one piece.
2. Seat. Frame. 1118x38x19 mm 2 units. 603x38x19 mm 4 units. 565x38x19 mm one unit. 565x64x19 mm one unit.
3. Back support. 381x38x19 two pieces. And a dowel made of wood longer than 650 mm in the amount of 1 pc.

Materials and tools

To make a solid, proper seat, look at the following drawing:

Need to fold the cut piece thick fabric and sew indents. But you can make a two-layer coating without saving. To do this, fold the measured segment inside with the front sides, stitch along the sides. But in the center (similar to a pillowcase), we leave space for carefully turning the seat on the front side. Then you can simply secure the longitudinal seams with one more stitch.

But needs loops or pockets to connect everything together. So we measure in advance already on a wooden frame required size pockets, then we tuck our rag and sew. It is important to measure so that there is an average condition between overly stretched and sagging.

In working with fabric and wood, we need to take:

1. Plane.
2. Hacksaw.
3. fasteners.
4. A hammer.
5. Chisel.
6. Sewing machine.
7. Measuring tool.
8. Paintwork materials for polishing.

Be careful with fasteners. Once iron or steel is exposed to moisture, it means that it is necessary to protect them with paint. It is also recommended to use quick-drying adhesives in those joints where there will be play. But in no case do we apply adhesive to the threads, because it will be problematic to disassemble the structure later.

How to use and care

In order not to complicate the work, you can do this:

Then the frame can be made monolithic, and the bright fabrics of the seat can be easily washed in a typewriter. Another plus: you can make several pockets for different weight and growth. There will be a universal design that even a schoolboy can set up.

Decor

There is more than enough room for imagination. Here's what happens without haste, savings and hack:

And if you take four more bars and movable fasteners (clamps, bolts, etc.), then the sun visor will come out. What is always in place in good weather:

Replacing the fabric with boards, we get the simplest bench-chaise lounge in terms of labor costs. The idea is not new, but available:

When there is no time for cutting and sewing, you can again make a lattice base, and buy a bedding from IKEA for this space:

The collapsible design, although it does not look so expensive, has a significant advantage - this is mobility. And you can fully relax if you add portable steps to the same frame. And for this it is not necessary to invent something:

Chaise lounges are prefabricated or stationary - this is simplest form country furniture. There has never been anything complicated in their design. But in working on furniture for relaxation, as in any business, you need to adhere to an independent or subtracted plan.

How to make a deck chair for the garden with your own hands, see the instructions in the following video:

Not so long ago, a deck chair was considered exotic, and only wealthy people could afford it. We saw sun loungers in colorful magazines and American films, but even with a strong desire, an attempt to buy something like this for ourselves would have turned out to be a failure - there simply were no sun loungers on sale.

Well, everything passes sooner or later, and the information revolution generously endows us with new opportunities. Now anyone can find on the Internet a manual on how to make a sun lounger with your own hands. However, such plans are often difficult to implement, especially for a beginner. They require the use of a large number of expensive tools, and therefore remain unfeasible for many.

This master class is a pleasant exception to the rule. The deck chair presented by the author has simple design and a clear system of folding and adjusting the backrest. If you approach the issue of choosing materials correctly, you will need a very modest arsenal of power tools and, in extreme cases, you could well borrow some of them from friends and acquaintances.

In addition, given the fact that the deck chair is made of natural wood, it can easily be used at home as well, instead of a couch or armchair in the living room. It quickly folds and unfolds, has a completely finished appearance. A beautiful textile mattress will complement the image, and the deck chair will perfectly fit into the interior of your home.

In order to make a deck chair with your own hands, you will need:

Materials:

Pine board 20 - 30 mm thick;
- slats with a section of 30 x 30 or 40 x 40 mm for the manufacture of a backrest folding system;
- natural or mineral oil for woodworking, drying oil or varnish for woodworking;
- screws and small nails;
- glue for gluing wood materials;
- metal one-piece loops for fixing the back: two larger ones and a smaller pair;
- a ready-made mattress with ties for fixing it or fabric, batting, foam rubber and threads for its manufacture.

Instruments:

Miter saw, circular saw or wood saw;
- a grinder if you are using old or unpolished boards;
- screwdriver or Phillips screwdriver;
- electric drill;
- clamp with a device for drilling pocket inclined holes(optional, but makes the job much easier);
- paint brushes;
- construction tape measure and square;
- pencil.

Step One: Sketch and Layout the Chaise Longue

A product layout is simply necessary if it itself consists of a large number of parts. It will not allow you to get confused in their countless list and will significantly speed up the entire work process. In addition, you will have a complete list of parts and their exact size. Well, without this, then?

But everything is preceded by a sketch. This sketch on a sheet of paper by hand gives rise to an idea and lays the main outlines of the image of the future product. That's where you should start.

In your case, the computer layout of the deck chair is already ready and you can safely take all the dimensions indicated in this master class as a basis. But first, write down on paper the entire list of parts that you have to make. Specify their sizes opposite and only after that proceed to work.

The detailing you have collected should be transferred to the material in the form of markings. Use a pencil for this to easily correct crept in errors. Also use a construction square. Especially if you plan to use a hand saw to cut the boards. It will allow you to mark angles at 45 and 90 degrees, and accuracy is never superfluous.

So, mark up the parts and start making them. Saw the boards into pieces of the length indicated on your list. You will need:

Two longitudinal frame parts 1850 mm long;
- five transverse frame parts 470 mm long;
- four blanks for legs 280 mm long;
- four - five boards for the base of a deck chair 1270 mm long;
- two side long boards for the base of a deck chair 190 mm long;
- two small slats for supporting the backrest when folded, 580 mm long;
- three bars for the manufacture of the backrest 43 mm long;
- four - five boards for the base of the back;
- two slats for the backrest folding system, 230 mm long;
- one horizontal rail for backrest folding system 460 mm long;
- six small pieces of rail for the backrest folding system - three on each side.

All indicated dimensions should be specified, since the author indicated them in inches. They also depend on the thickness of the boards you are using. To figure out the dimensions in your case, always start with the general values ​​and work your way down to the finer details.

Start by assembling the deck chair frame. Remember that it is customary to assemble any frame with screws. This ensures the relative strength of the entire structure. However, it often happens that screws alone are not enough. Then glue is also used. Such combined connections serve very well and do not require repair for a long time.

Assemble the chaise lounge frame with glue and screws and fix the legs. Fasten the base parts to the frame with small nails. In parallel, make the back panel.

Inside the hole for the backrest on the sides, screw two support rails on which the backrest rests when folded and on which sections of the rail (teeth) are attached to adjust the inclination of the backrest. Fix your teeth.

Connect the back to the frame using a pair of one-piece metal hinges. Also make a U-shaped piece for the back and secure it in place with the smaller loops. Check backrest adjustment.

Any furniture sooner or later is subject to wet cleaning. Untreated wood hardly tolerates such processing, and the result often turns out to be zero. Therefore, the tree must be treated with suitable paints and varnishes.

The author decided to leave the wood unpainted so that it could be seen that it was made from natural wood. In this case, the most reasonable option would be to varnish the deck chair with a matte or semi-gloss transparent varnish.

Since furniture is usually used very intensively, you should choose a varnish that will give the most durable and wear-resistant coating. For example, profile furniture varnish. Apply it to the surface of the wood in several layers and let each one dry thoroughly.

Sun loungers are comfortable lightweight armchairs, which are often equipped with places to relax. They are installed on beaches and near outdoor pools. To give this item may be part of the exterior. On it you can relax after a busy tiring day, swim in the gentle rays of the sun or take a nap in a shady place away from human eyes. In this article, we will look at how to make a deck chair with our own hands from wood, show drawings, as well as photo and video instructions.

To begin with, you should decide on the type of deck chair. It can be made from wood, aluminium, plastic and synthetic fabrics. We will focus on a practical and easy-to-manufacture option - a deck chair made of wood.

Wood for the product and its design is selected depending on:

• your preferences;
• the availability of improvised materials;
• financial opportunities;
• style of your garden.

When choosing wood for a future deck chair, physical and mechanical properties should be taken into account. certain types tree. For example, beech, ash, larch or oak will last the longest. It is durable and durable materials Moreover, they are aesthetically pleasing. But this type of wood is quite expensive and exceeds other types of wood in weight, which makes it more difficult to move finished products.

Chaise longue made with my own hands, will not only save your money, but also ennoble the garden, give it exclusivity. There is a wide variety of wood deck chair designs.

A folding chair is more convenient, as it will not be difficult to move it, and in rainy weather it can be easily folded and hidden (which is important for wooden products). With just one movement, you can turn a chaise longue into a comfortable chair.

materials

So, from the materials we need:

For back legs:

• 2×4×122 cm - 2 pcs.
• 2×4×61 cm - 1 pc.
• 2×4×65 cm - 1 pc.
• 2×6×61 cm - 1 pc.

For seat legs:

• 2×4×112 cm - 2 pcs.
• 2×4×60 cm - 4 pcs.
• 2×4×57 cm - 1 pc.
• 2×6×57 cm - 1 pc.

Back support:

• 2×4×38 cm - 2 pcs.
• Wooden rod with a diameter of 1.2 cm, length 65 cm - 1 pc.

Fabric seat:

• Fabric 137×116 cm.
• Wooden rod with a diameter of 1.2 cm, length 55.9 cm - 2 pcs.

To fix details:

• Bolts and nuts - 4 pcs.
• Washers (under the bolt head and nut) - 8 pcs.
• Joiner's glue.
• Screws.

Instruments:

• Drill.
• Sandpaper or grinder.
• Needle file of round section.

Preparatory processes

All parts must be pre-treated, namely, sanded and treated with special impregnations to protect wood from corrosion. Then the product will serve you much longer.

As can be seen in the drawing, crossbars are installed at the bottom of the seat legs, thanks to which the position of the backrest is fixed. If you plan to install only one plank, you should first make cuts in place of the planks: 20 cm from the edge, then 25, 30 and 35. You also need to make holes for the bolts on the back frame, retreating 41 cm on each side. On the seat frame should retreat 43 cm from the top. And on the support of the back of the deck chair, make a hole in the center from the edges.

Frame assembly

First of all, the back frame is assembled. A plank with a size of 2 × 6 × 61 cm will carry the main load, so its fastening should be given Special attention. Its fixation should be performed as securely as possible. Be sure to leave a gap of 1 cm between the two planks. It will be necessary for attaching the fabric.

Based on the above diagram, assemble the seat frame. After that, fold the back and seat frame. Previously, on the back frame from the top bar, drill holes on both sides at a distance of 41 cm, and on the seat 43 cm. Fasten them with bolts and a nut. Between the racks of the frame, be sure to lay the washer.

Nuts may loosen during use. To prevent this, tighten one more locknut. Nuts can also be planted on paint or glue Moment. To adjust the free play, first tighten the nut and then loosen it slightly. Then let the glue/paint dry.

Now you can install the back support. Fasten the planks to the back with bolts and use washers in the same way. A large dowel is pressed into the prepared hole in the planks using glue.

The fabric for the seat should be strong enough. Suitable canvas, tarpaulin, jeans and other types of fabrics resistant to wear.

The fabric should be folded in half and stitched, stepping back 1.5 cm from the edge. Then we turn it out. We bend the edge of the fabric for the rod, which fixes the fabric seat between the slats, and stitch it. We do the same with the reverse edge.

Then the edge of the fabric should be inserted between the slats and the rod should be installed in the bend. Thus, the seat will be firmly fixed, but at the same time it will not be difficult to remove it for washing.

Final Processes

At the final stage of manufacturing a deck chair, it is desirable to eliminate the remaining or formed irregularities and roughness with a needle file or sandpaper. After that, if desired, the product can be covered with paint or varnish.

Of course, using this construction, you have many opportunities to improvise. For example, instead of a fabric seat, you can simply install more slats all the way to the joint. It depends on your preference.

This design is completely different from the previous one. But nevertheless, making it with your own hands is not at all more difficult. Such a deck chair is not very convenient to move, but on the other hand, with careful execution and careful processing, it is quite aesthetic and easy to perform.

Of the tools we need:

• drill;
• sandpaper;
• saw;
• roulette;
• marker.

From materials:

• 2.5 × 8 × 60 cm - 13 pcs. (slats for sitting);
• 5×10×21 cm - 2 pcs. (longitudinal bars for the frame);
• 5×10×50 cm - 2 pcs. (cross bars for the frame);
• 5×10×35 cm - 6 pcs. (chaise lounge legs);
• 5×10×88 cm - 2 pcs. (back of the product);
• 5×10×39 cm - 3 pcs. (back of the product);
• 2.5 × 8 × 88 cm - 6 pcs. (slats on the back frame);
• 5×10×60 cm - 1 pc. (beam for fixing the back in the desired position);
• wood screws;
• studs for fixing;
• paint or varnish;
• wood impregnation.

The first step is to process the wood. Then you need to make a frame. To do this, take 2 longitudinal beams of 215 cm each and 2 transverse beams of 50 cm each. We connect them with screws.

Next, take 13 planks of 60 cm each and fix them on the frame with self-tapping screws, leaving a gap of 1 cm between them. To make the distance even, you can use centimeter spacers in the form of planks. Thus, we got the seat.

The next step is to install the legs of 35 cm from the timber (the length of the legs can be changed as desired). From the side of the seat, to strengthen the structure, we make double legs.

Next, we make the back of two bars 88 cm long and three bars 39 cm. The back frame should freely enter the main structure, it is also necessary to leave a small gap between these blanks.

Now fix the back boards in longitudinal direction. The end boards can be rounded to give them a more aesthetic appearance.

To make the backrest move up and down easily, make through holes at a distance of 9 cm from the edge of the seat through both structures. Fastening is carried out using special studs.

After that, at the base of the deck chair, you need to make 2 grooves into which the support bars will be placed. Due to this, the back can be fixed in different positions. One groove is made at a distance of 9 cm from the pin, 5 × 10 cm in size. The next groove is 20 cm from the previous one 5 × 5 cm.

A bar 60 cm long is laid horizontally in the first groove, which will hold the back in the desired position. If you want to change the position of the backrest, then the beam is shifted into the second groove.

Following such a scheme, the process of a wooden deck chair is practically completed. It remains only to sand the structure, varnish it or paint it.

original ideas

We invite you to review original design sun lounger making. For its manufacture, logs Ø75–120 mm are required. To do this, you need to prepare the following tool:

• logs;
• electric saw;
• drill;
• self-tapping screws;
• staples;
• set of drills.

The manufacturing process is as follows:

• First, cut logs 45 cm long.
• After you create the layout future design. To do this, take electrical tape and use it to draw a contour directly on the floor.

• Next, make holes in the chopped logs.

• All elements are interconnected. Each log is twisted 4 long self-tapping screws. You can use a socket wrench to tighten them.

• Now you can turn the resulting design and test it. If it is unstable, then eliminate this defect.
• To make the chaise longue more stable, fix the brackets on the back side.

Although this work process is quite troublesome and time-consuming, the result will please your eye. At the same time, such a chaise lounge will be a great addition. suburban area.

If you have your own ideas for making a deck chair, then write about them in the comments to this article. If you find it difficult to come up with your own design, then use the drawings below. We hope the information provided will help you make your own deck chair.

Video

In the video provided, you can learn more about the technology:

Blueprints

The presented drawings will help you design a deck chair with your own hands:

How nice it will be after a hard day's work on your backyard to lie down on a comfortable sun lounger made by yourself. There is currently a large number of a variety of sun loungers made from the most various materials. And now we will tell you how you can make sun loungers yourself from wood and fabric, as well as how to properly monitor them so that you can enjoy your vacation in the country for decades.

Chaise lounge for a summer residence - a description of the design, types of products and their characteristics

Chaise lounges have their own special design, back frame, seat and armrests, so that a person feels as comfortable and comfortable as possible in it. We are talking about both reclining and semi-sitting versions of a deck chair, which contribute to the maximum relaxation of all the muscles of the human body.

It is these qualities that a classic rocking chair has, which you can make yourself, having all the necessary drawings with calculations and design sketches available.

Due to the lightness of the design, summer sun loungers can be moved to any place. personal plot depending on whether you want to lie in the sun or in the shade. Folding wood and fabric products are very convenient, as they can be removed indoors when it rains, and they will not take up much space.

The wooden deck chairs are high level durability and are renowned for their long service life with proper care.

Today, having a competent and accurate drawing in your hands, you can make yourself a folding or lightweight hanging deck chair that will fit quite aesthetically into the exterior of the entire backyard.

Types of sunbeds and deck chairs

Depending on the type of construction, sun loungers can be divided into several varieties:

• Monolithic frame. This is an outdoor chair in which all the elements are connected to each other "tightly". Such a product is very durable and can withstand even the heaviest loads. It is absolutely safe even for small children under 1 year old. But, meanwhile, such a product during its operation can create some inconvenience. It is impossible to make your own adjustments and change the angle of the backrest in such a chaise longue, it does not fold and therefore it is inconvenient to move it from place to place, as well as store it in small spaces(pantries, closets, etc.).
• Monolithic chairs with special inserts have a beautiful appearance and are characterized by a high degree of decorativeness. They are equipped with additional inserts, which are made of materials of different characteristics, which reduce the degree of strength of such a design. But, meanwhile, they look very aesthetically pleasing and spectacular.
• Portable folding deck chair designs have special movable mechanisms that allow you to quickly change the position of the backrest at your discretion. This applies to the entire sun lounger as a whole. If necessary, a person can easily change the degree of inclination of the backrest, headrest, as well as the lower footrest. Portable folding sun loungers you can take with you on a trip due to their extremely compact size when folded. They practically do not get dirty during long-term operation.

Gallery of sun loungers and their types

Designer chaise longue - rocking chair with strong metal hoops instead of legs Original deck chair for country house Folding chaise longue with canvas seat, plastic handrails and metal frame Plastic folding chaise longue with soft mattress Wooden deck chairs for summer cottages Original deck chair made of wood with soft mattresses in the form of a spiral Chaise lounge rattan with repositioning back An original designer deck chair that you can make yourself from chipboard sheet Chaise lounges with a spring seat on a metal base

Preparation for creation: select a drawing and determine the dimensions

Before you start making a deck chair for your home, you need to decide on optimal design and choose the most optimal and uncomplicated option that you can easily do on your own without the help of masters.

The main thing is to find accurate and competent drawings that will make it easy to cope with such work and, as a result, get a convenient and maximum reliable design for summer holiday on their personal plot, as well as near a river or lake.

We choose materials for assembling a convenient and durable design: tips for choosing

Let's take a look at the types country chaise lounges, as well as the types of materials from which they are made. Their advantages and disadvantages, as well as what materials can be purchased for their manufacture.

1. Chaise lounges made of wooden boards and beams are considered the best, as wood is an environmentally friendly natural material. Today you can see the most various options sun loungers and deck chairs, ranging from ordinary outdoor chairs with a movable back to the most comfortable models that exactly follow all the contours of the body of the seated person. Since the back of such a deck chair can be fixed in several different positions, a person can always take the most comfortable position for him while relaxing for sleeping or contemplating nature. It should be noted that wooden deck chairs are quite heavy, so usually their frame is equipped with two wheels for easy movement of the product around the backyard. As a convenient addition, you can sew fabric mattresses with soft padding, which will be attached to the frame using ordinary rope ties. Since the tree is afraid of water, it is not recommended to put such sun loungers near pools, rivers or lakes, where water can constantly fall on them or they will absorb a large amount of moisture. Water will contribute to the swelling of the wood, as well as its deformation. Even if the boards and timber are well treated with various means, covered with a water-repellent deck varnish, it's still not worth the risk. When buying lumber for the manufacture of a frame, it must be borne in mind that the most durable and high-quality boards and beams of larch, oak, birch, teak, hazel, and spruce are considered. Pine is the cheapest, but it must be well dried and carefully treated with antiseptics.
2. Plastic deck chairs are budget option, which are usually installed near swimming pools, on city beaches and in other in public places. They cannot be made at home, but they have affordable price, easy to care for, and also not afraid of moisture.
3. Sun loungers in the form of swings and rocking chairs can provide a wonderful holiday for both adults and children. Chaise lounge frame - the swing clings to a strong hook on a reliable metal support and then just floats in the air. At the top of the counter, an umbrella or a large visor is usually placed, which protects vacationers from hot weather. sun rays.
4. Highly unusual option can be called design model rocking chairs, which has round supports in the form of two strong iron hoops. Such a deck chair can be easily folded and moved to another place.
5. Wicker lounge chairs are great option outdoor furniture for relaxation, which is made from natural natural materials: popular rattan, resilient vine or durable hemp. Products can also be made from synthetic fibers. Since wicker chairs are considered premium furniture, their cost is quite high. Rattan products are distinguished by their beauty, design refinements and excellent style solutions.
6. Chaise lounges from pallets or pallets, which are used to move and store goods, will be an excellent cost-effective inexpensive option, because such wooden structures can be bought at a bargain price if they have already served their time and are unsuitable for operation. They will need to be slightly repaired, sanded and painted with multi-colored paint, and then you can assemble a deck chair for your home. From two pallets fastened together with bolts or self-tapping screws, the base of the structure is made, and an inclined back is made from the third. They look very beautiful and aesthetically pleasing, and also have a long service life.
7. Fabric sun loungers on a wooden or metal frame are the most convenient, comfortable and easy to handle. The basis here is a frame made of wood or metal, on which a seat made of dense fabric (canvas, tarpaulin, jeans, teak, mattress fabric or camouflage) is put on.

Wood and fabric are environmentally friendly clean materials, so this deck chair will be a great option for giving, where there are small children. Minus such street construction is the fragility of the fabric, but if it breaks or loses its aesthetic appearance, you can always replace it with another one and the deck chair will again be like new. wooden frame can be sanded and re-lacquered or painted, and metal can be processed sandpaper and also paint with a special water-repellent paint for metal.

It is best to buy a metal profile seamless, since the deck chair frame will have to “hold” enough big weight man, and he must be strong.

If possible, purchase stainless or galvanized pipes, which are the least susceptible to corrosion and have a long service life.

Calculation of the required amount of material for construction: working tools

In order to make a wooden deck chair with a fabric seat at home, we do not need complex and expensive tools, so even an inexperienced novice master will be able to make such a design for his country or suburban area at the lowest cost.

For the device of the back we need wooden planks these sizes:

• Two pieces 19x38x1219 mm;
• One piece 19x38x610 mm;
• One piece 19x38x648 mm;
• One piece 19x64x610 mm.

For the manufacture of the seat frame, boards of the following sizes are needed:

• Two pieces 19x38x1118 mm;
• Four pieces 19x38x603 mm;
• One piece 19x38x565 mm;
• One piece 19x64x565 mm.

For the manufacture of support for the back of the structure:

• Two boards 19x38x381 mm;
• One wooden round dowel with a diameter of 12 mm (length 648 mm).

To make a fabric seat, we need:

• Two pieces of awning, denim, camouflage, mattress or other durable fabric (cut size 1372x578 mm);
• Two wooden dowel diameter 12 mm (length 559 mm).

For fastening the structure:

• Four bolts with nuts size 6x50 mm;
• Twelve washers for nuts;
• Wood screws size 4x50 mm;
• Ordinary PVA glue or special glue for wood products.

As tools we will use:

• Round file;
• Fine-grained sandpaper or grinder;
• Roulette;
• Electric drill;
• Bulgarian or saw (manual, electric or gasoline);
• putty for wood;
• Construction pencil or marker;
• Water-repellent varnish or paint;
• Hammer and screwdriver;
• Square.

Wooden elements must be re-sanded, coated once every two or three years. protective equipment, varnish or water-repellent paint and then the deck chair will serve you much longer.

Video: Making a simple sunbed

Video: How to make a do-it-yourself wooden sun lounger with a movable back

Video: How to make a metal structure with your own hands

A wooden deck chair with a fabric seat will be the most lightweight design in manufacture and comfortable for summer country rest. If you make several designs with your own hands, then you don’t have to worry that you will have nowhere to relax on warm summer days with your big and friendly family. Both adults and children will be able to comfortably accommodate on the territory of a personal plot or near a river that flows nearby and enjoy beautiful views of natural landscapes and flowing water.

How to ideally end a troublesome and tiring day on fresh air? the best way relax after working in the garden will be relaxing in a sun lounger with a glass of freshly squeezed juice in your hands. At the same time, it is very important that the deck chair fits perfectly into the environment and gives a feeling of peace and tranquility. Can't find the right one country furniture in the shops? Then it's time to learn how to do it yourself.

Types of sun loungers for summer cottages

Before you make a deck chair yourself, you should decide on its type. However, experts advise not to experiment, using modern technologies as a basis. plastic materials, different bad quality and fragility. Better look for quality wooden base with a flat, smooth surface. The only drawback of such property will be its large weight, but this problem can be solved by installing rollers on the legs.

Work materials

To make a deck chair out of wood with your own hands, you need to prepare the following materials and tools:

• a slab of glued wood, the thickness of which will be at least 2 cm;
• boards (0.25 cm) and bars (0.45 × 0.45 cm) for finishing works and creating a frame;
• electrical appliances (jigsaw, screwdriver, drill);
• drills with a diameter of 0.4 cm;
• 4 rollers 10 cm each;
• corners (as for attaching a bed);
• sanding sheets;
• varnish and paint to decorate the structure and protect it from damage.

For homemade deck chairs, it is better to use sheets of spruce or other coniferous tree. They perfectly resist moisture and are not afraid sudden changes temperature. These materials can be bought directly from construction centers or made to order from a cabinetmaker (carpenter).

Overall dimensions of the product and getting started

You can make a wooden deck chair according to the dimensions of your body or individual sizes future owners. Can you stop at standard size- 60 × 190 cm. After the dimensions are determined, you can start working:

• form the sidewalls from the bars and fold the frame of the structure, attaching the details with the corners;
• finish each outside finished frame with prepared boards;
• proceed with further assembly.

Stages of creation do-it-yourself deck chairs

1. Make blanks for the legs of the product using bars desired height. Usually their height is about 5-10 cm, but you can choose other sizes.
2. At a distance of 5-7 cm from the edges of the long bars, fasten the legs using long screws.
3. Attach a roller to the center of each leg. To do this, take screws of a smaller length (about 3 cm in length).
4. Via electric jigsaw start cutting the elements of the lattice to create a deck chair with your own hands. Most suitable size for planks - 8 × 60 cm.
5. Start screwing the planks to the frame of the lounger, using special spacers to create ideal gaps (1-2 cm will be enough).
6. After assembling the structure, it must be sanded and painted in a suitable color.

If you decide to make a folding deck chair with your own hands, divide the wooden lattice into two parts, which can then be connected with ordinary door hinges. At the same time, it is important not to forget about important detail – mounting plate. It should rest on a stand secured with screws.

Below is the drawing for the slatted chaise longue:

Making a deck chair on a frame basis using dense fabric

Another popular and in an easy way making a deck chair for a summer residence with your own hands is a deck chair made of material on a frame. It's lightweight and comfortable suburban option, which with one movement of the hand can be turned from a sunbed to a chair and vice versa.

You will need the following materials and tools:

• two slats of wood 0.25 × 0.6 cm of different lengths (120 cm, 110 cm, 620 cm);
• wooden slats 2 × 2 cm (65 cm - 1 pc., 2 pcs. 60 cm and 50 cm each);
• high-quality dense material 2 × 0.5 m;
• drill;
• bolts and nuts of suitable diameter;
• PVA glue;
• sandpaper "zero";
• round file.

Choose a durable fabric that is not afraid of exposure to sunlight and moisture. The ideal option becomes jeans, canvas or tarpaulin. Reiki is better to choose from oak, birch or beech (they have increased hardness and strength).

To make light sun loungers for giving with your own hands, you need to prepare the slats of the desired length and sand them.

Assembly steps

• you need to drill holes suitable for the selected bolts on each long rail, always retreating 7-10 cm from their edges; all irregularities should be immediately sanded with a needle file until smooth surfaces are formed;

• at the head of the frame (indicated in Figure "B"), several holes should be drilled at once for subsequent adjustment of the inclination of the seatback;
• to create a seat, you need to make two more holes at the ends of long rails; their diameter must match the diameter of the prepared round laths (in this case- 2 cm); to keep the slats stronger, grease their ends with PVA glue;
• combine the structure "A" and "C" with the screws passing through the upper holes, then in the same way combine the resulting module with the element "B";
• stretch the fabric by wrapping the edges on the crossbars and sewing a few seams with strong threads (this procedure can be done before final assembly products, then you can sew the material using a conventional sewing machine).

How to make a deck chair with your own hands even more comfortable?

To provide additional comfort to your sun lounger, a mattress should be laid on it. Take measurements of the finished design, buy enough fabric and filling material. You can sew a mattress in any known way.

Now you will be able to independently design a deck chair for your summer cottage, without resorting to the help of specialists and the advice of friends. There is nothing complicated in this matter, if you clearly follow the instructions and follow the information. Learn with us and improve your skills!