Board gate. Wooden gates with their own hands. How to do everything right? Tools and equipment for woodworking

Wooden gates can be quite attractive, but only if you take into account all the necessary nuances when installing them. Knowing the technology of their creation helps a lot to save money and get the result you need.

There will be no need to explain to designers and developers what exactly is required of them, to carefully select the delivery package, and so on.

Peculiarities

You can make gates out of wood either sliding or swinging; no one makes them lifting and lifting-turning, because this excessive complication of the design is not always realizable.

The type of wood laying allows you to make the fence either solid or discontinuous, divided into blocks.

Advantages and disadvantages

The obvious positive aspects of wood are:

• Availability. Finding the right material in any quantity is easy;
• Relatively affordable prices. Much less than the metal fee for a similar design;
• Ease of handling and installation. Almost anyone can make wooden gates, and their installation is much easier than installing steel ones;
• No need for welding equipment;
• Sufficiently long service life and the reliability of the structure being created (if everything is done correctly and the care is in accordance with the norm);
• Ease of repair. Replacing a board is much easier than correcting defects in a metal sheet or profile.

The disadvantages of wood are also quite obvious: this is both a relatively lower strength and susceptibility to fire (special processing only lowers it, in addition increasing the cost of the entire structure). It will be necessary to treat wooden products with means that stop the process of decay.

Kinds

It is not at all necessary to create simple wooden structures; a very competent step is to use beautiful gates. The main difference is always in how the parts are connected to each other. The traditional solution is a hinged product, which is made simpler than other types and serves flawlessly for a long time.

You can select such groups of gates from a tree as:

• "Chess";
• Made from picket fence;
• Deaf closed fences.

Sheathing is done both on a metal frame and on a wooden one. In urban conditions and with an acute shortage of space, retractable structures are in demand much more than classic swing systems. The only problem is that they are created much harder and require the mandatory involvement of professionals.

Please also note that the bearing mechanism with automatic rollers is expensive and capricious; if handled carelessly, it easily fails. It is possible to mount carved elements on any type of wooden gate both from above, and from below, and on the frontal plane.

materials

Wooden gates will show all their advantages only with careful selection of the appropriate material. In many cases, simply wood-clad steel frames are used - this is a relatively heavy option, but it is stronger and safer than solid wood construction.

Expensive valuable wood species are used only occasionally, in most cases limited to simple pine details. After all, they are quite beautiful, allow you to create a pleasant appearance and at the same time are very resistant to destructive influences. Budget projects provide for the creation of gates mainly from a picket fence.

Dimensions

Standard gate sizes are 300-400 cm wide. Keep in mind that your needs may be far more important than this generally accepted standard.

When the site is built up, it is desirable to make a wider passage so that trucks and special equipment can easily drive in and out. Be sure to leave a gap from the bottom edge to the ground, otherwise it will be inconvenient to use the gate when snow melts, an ice crust forms or after heavy rain.

Style and design

The antique gates look elegant and romantic, and this is exactly the case when pine details are unsuitable. A relatively economical solution to the problem is the use of larch, and the density makes it possible to prevent the action of many negative factors.

Alternatively, you can use iron gates with forging elements that mimic the look of natural wood. It would be even better to fill the sashes with wooden parts. To connect such dissimilar materials will help bolts equipped with a semi-countersunk head without edges. The frame needs to be drilled, then the boards are pulled up to it by 2 or 4 fasteners. The nut is always left on the inside of the structure.

How to do it yourself?

Anyone can make wooden gates and gates, even people who do not have much experience in such matters. But success cannot be achieved if you do not prepare a good set of tools and materials. It always includes:

• Pencils, rasps;
• Squares, screwdrivers, levels, self-tapping screws;
• Planers, plumb lines, crowbars;
• Tanks for the preparation of concrete mortar;
• Bars made of wood;
• Metal constipation;
• canopy;
• hinges;
• A set of rails or a picket fence for the outer skin of frames.

Before buying lumber, you should find out the required size (height) of the structure, the size of the gate. We must not forget that it will be necessary to deepen the support pillars by 1 m into the ground otherwise stability cannot be guaranteed.

Before installation, each wooden pole is completely impregnated with antiseptic agents, and the underground parts are additionally treated with resins or bituminous mastics.

The territory must be prepared: stones are removed, clods of earth are broken and leveled. It is advisable to mark the support points and mounting directions with the help of stakes, cords. It is almost impossible to do all the work alone, so assistants are always invited. You can hang the sashes only after the concrete has completely dried.

The poles are set up like this:

• A drill makes a hole 100 cm deep;
• They look so that the planes of the pillars turned towards each other are slightly further apart than the width of a standard gate;
• In this case, the distance should not exceed 1.2 m;
• The hole is sprinkled with sand for 0.05 m and thoroughly spilled with water so that its shrinkage is completed as soon as possible;
• Add 50 mm of crushed stone;
• The underground shares of the pillars are fired with gas burners or blowtorches;
• Guided by measurements, with the help of a plumb line they put the pillar itself, fall asleep with rubble and ram;
• From above, the stone cushion is covered with cement mortar.

The frame for the sashes is formed using a jigsaw, with which pieces of timber of the desired length are easily cut. The ends of these pieces are drilled and wooden nails are driven into the holes.

To fasten the jumpers, they take galvanized self-tapping screws, put them horizontally or diagonally. Be sure to sheathe the frame with slats, otherwise the gate will easily sag and quickly deform. Burrs and other imperfections of wood are easily removed when using planers with a well-sharpened working part.

Solid gates are formed by laying boards with nailed rails on the frame and drawing cut lines. If the top is rounded, it is most convenient to mark it with a compass. Lattice structures are more complicated, here each rail will have to be marked and cut off separately. The connection of structural parts will be simplified if you use wood screws.

When setting up a gate, always make sure that it locks securely and does not swing open by itself. Only by eliminating such a problem, it is possible to install valves and a lock.

Prefabricated stainless steel constructions are the best option for fittings., anodized metal is slightly worse. Attaching the gate to brick pillars is possible if a couple of hinges are left outside at the time of their construction. The connection of the overhead parts of the hinges with the horizontal crossbars of the gates or gates is preferably done with bolts.

Wooden gates or wickets can even be hung on metal or concrete poles. This is done with the help of suspension units, which includes a hook, nuts and a clamp (a couple of units are enough). In order to be able to put a lock, a loop is made near the valve in such a way that the shackle will also go on the handle. For painting wooden gates, it is recommended to use polyurethane-based yacht varnish as the most durable and reliable. But it should also be applied in at least two layers.

For owners of private houses, the times have come when absolutely everything can be purchased for arranging the territory. But many prefer to do everything on their own, which significantly reduces costs and is the pride of the owner. If the fence is made of wood, then it would be logical to make wooden ones, besides, it is not difficult to make them with your own hands.

Advantages and disadvantages of wooden gates

Wood is a cheap and practical material that can be easily processed. Gates made of this material are light, environmentally friendly and will perfectly fit into the style of almost every house due to their natural appearance.

At the same time, this material is not without certain disadvantages, since it requires constant processing and care. Wooden gates are not distinguished by high strength and durability, and are also prone to fire. But with proper maintenance, this can be avoided.

Preparatory work

Before proceeding with the direct manufacture of wooden gates, you need to prepare everything. First of all, you should make measurements and a drawing. If there are no special skills to draw up a professional drawing, it will be enough to schematically display the main elements and dimensions on paper.

When measuring, you should set the length between the two ends of the fence. Divide the resulting value in half - this will be the approximate width of one sash. To determine the exact size of the sash, you should take into account the width of the support posts, as well as set the gap for mounting the hinges that will connect the support posts to the sash.

The optimal gate height is considered to be 2 meters, while the support posts should be about 3 meters, since about 1 meter must be immersed in the ground.

• roulette;
• level;
• screwdriver;
• plane;
• wood saw;
• welding machine;
• self-tapping screws.

The material must be selected carefully. The presence of knots, as well as blue on the surface of the tree, is unacceptable. Support poles can be made from metal pipes or wooden beams. Regardless of the material chosen, the cross section of the supports must be at least 15 centimeters. For the manufacture of sashes you need the following:

• metallic profile;
• wooden boards with a section of 10 x 2.5 cm.

To attach the sashes to the supports, loops in the amount of 4 pieces are required. Having calculated the amount of material that is necessary for the manufacture of the gate, it should be noted that it should be taken a little with a margin.

Production and installation of gates

Despite the fact that the manufacture and installation of wooden swing gates is a simple process, a certain sequence in the stages of work should still be observed.

Installation of supports

First of all, you need to install support poles. If the support is metal, then it must be pre-treated with an anti-corrosion agent, and if wooden, then with an antiseptic. Next, two holes are dug to a depth of at least 1 meter. The deeper the hole, the more stable the structure will be. At the bottom of the pit, it is recommended to fill in a little rubble. When installing wooden poles, the part that will be in the ground should be treated with a bituminous solution, which will prevent the wood from rotting.

The pillars are inserted into the pits and filled with concrete mix. The verticality of the installation is controlled using a level, because the reliability and integrity of the entire structure depends on it. At this stage, you should take a break of about 3-5 days so that the concrete hardens and gains the necessary strength.

Sash manufacturing

In order not to waste time in vain, during the period of concrete hardening, you can begin to manufacture the wings. You need to start with the frame. It can be made of wood, but a more reliable design will be from a metal profile. Frame parts are cut. Then it must be laid out on a flat surface, aligning the corners, which should be straight. When welding corners, it is recommended to apply additional metal plates to stabilize the frame.

The rigidity of the frame is achieved with the help of diagonals and a cross beam. All elements must be welded, and the welding points cleaned with a grinder or a special brush for metal.

Next, prepare the outer skin. To do this, measure the desired size of the board - a little more than the height of the frame - and cut it. Fasten to the frame with self-tapping screws. After that, the surface must be carefully sanded.

After the sashes are ready, hinges are attached to them. At the final stage of installation, the sashes should be hung on the supporting poles using hinges. For a more durable gate design, it is better to use welded hinges, they hold the leaf more rigidly and do not loosen during operation.

The final stage of work

In order for swing wooden gates to serve for a long time, they must be treated with an antiseptic agent, which is recommended to be applied in at least two layers. After the antiseptic has completely dried, the surface can be coated with stain and varnish or any wood paint. Considering that the tree is prone to fire, it is recommended to treat the sections with a special fire-fighting composition every 3-4 years.

A deadbolt can be installed on the inside of the doors, which will serve as a reliable protection against break-ins. Many swing wooden gates are equipped with an electric drive, with the help of which the gates open and close by pressing the button on the remote control.

During operation, it is recommended to constantly tint the wooden structure, and lubricate the hinges with oil, and then the gate will last for many years.

Does the fence need wooden gates and a gate? Our company provides a full range of services for the installation of a fence, order wooden gates and a turnkey gate for summer cottages at affordable prices with installation, the price of a set of gates and gates depends on the size, as well as on the finishing material. We install various types of gates throughout the Moscow region, you can order both automatic swing gates and turnkey sliding gates. A wooden gate with installation will create the final appearance of a successful site.

Gates and gates can be made of larch, pine or spruce according to your desire, while any wood is treated with antiseptic solutions, which significantly extend the life of the gate.

We offer you the installation of sliding gates, swing gates, both mechanical and automatic with electric drive.

The main advantages of wooden gates and wickets

1. Environmental friendliness - wood is a natural material that conveys the natural beauty of nature and the aroma of resin to structures.
2. Reliability - the specialists of the company "ALL FENCES" will perform wooden gate in compliance with all technologies, which will make it durable and reliable. Gate installation carried out by fixing the structure to the pillars, the material of which is selected based on the combination with the general type of fence (metal, brick, concrete).
3. High quality - we use only durable types of wood that are not subject to decay.
4. Aesthetic appearance - wooden gate can be not only deaf, but also contain elements of wood carving, which will give a special elegance to the outwardly simple design of the gate.
5. Optimal price - cost wooden gates and gate in the company "ALL FENCES" is very attractive - see for yourself!

If you are looking for a quality wooden gate at an attractive price - contact us! We are always glad to new clients!

Prices for the manufacture of wooden gates with delivery and installation

Gates are not only an integral part of protection, but also a decorative element of the site. Significantly reduce the cost of work can independently manufacture structural elements and directly installation. Various materials are used for production, new processing methods, ways of functioning appear. Wooden gates are suitable for a cottage, a summer residence, a house, a garage. If you decide to make the gate yourself, below is information on how to prepare and protect the wood, how to calculate the consumption of materials, draw up a work plan, install and sheathe the structure.

Advantages and disadvantages

Until recently, wood was the most common and affordable material. Wood is easy to process, has a low cost. Basic skills in using tools were enough to make wooden structures - fences, gates, gates. Raw wood fencing is rare these days. Usually, they are used as temporary limiters of the site during the improvement of the site, the construction of a house.

Wood is a versatile material that is used for retractable, swing, lift-and-turn structures. The gate is the first thing guests notice. Therefore, they have become an indicator of the status, impeccable taste of the owner. Garage doors made of wood are usually made of a lift-and-turn type. The only limitation in the use of the material concerns the lamellas in roll mechanisms. The wooden canvas has a low strength in this case. Often a metal frame is sheathed with wood. Wooden sliding gates in this way of sheathing the base increase the thickness of the leaves and the total weight.

Wood as a material for gates has the following advantages:

• ease of processing;
• speed of installation;
• affordable cost;
• beautiful texture;
• reliability.

Buying wooden blanks will cost less than metal ones. Various types of wood and sizes of boards are presented in hardware stores to buyers with any material possibilities. In addition, in the Russian Federation you can get from 50 cubic meters of wood for free, depending on the region, you can learn more about this from the video:

Woodworking tools are available and do not require special skills. While for processing metal parts you will need a welding machine, an angle grinder. Properly treated, quality wood will last for decades, even in harsh weather conditions. When broken, a wooden canvas can be easily repaired by replacing the board. The easiest to manufacture and self-install are swing wooden gates.

There are also disadvantages to using wooden gates:

• low mechanical strength;
• with poor processing - a short service life;
• high flammability.

For gates, usually not valuable species of expensive wood are used, but larch and pine resistant to moisture and decay. The internal frame made of metal will increase the strength and durability of the structure.

Preparatory work

Before starting the processing of the material, it is necessary to draw up a schematic structure of the structure, taking into account the location of the elements. Preparing a diagram and accurately measuring the opening is important in calculating the expected material consumption and will save time during installation. It is possible to make wooden gates and gates on your own. You will need basic knowledge in woodworking, skills in working with carpentry and joinery tools, and patience.

After measuring the gate opening, you need to draw up a drawing of the future structure, observing the proportions of the height, length of the leaves, the distance between the supports, the location of the gate. It is taken into account in the scheme of the place of attachment of constipation, canopies, decorative elements. Door leaf boards are suitable for sizes 100 by 25 mm, frame - 80 by 60 mm. The blanks will decrease in size as a result of processing by 5-10 mm. In the calculations, it is necessary to take into account technological gaps from 10 mm, possible deformation, expansion of the material. When purchasing boards, you need to clarify their purpose, the degree of drying. For the production of gates with your own hands, a carpentry edged board is best suited. Such lumber is less prone to deformation and delamination. It is enough to dry fresh boards for one year in a well-ventilated area.

Preparatory work should include the manufacture of special supports from logs or wooden beams. Reliable supports deepen into the ground to a depth of 1 m.

It is recommended to leave a distance of 200 mm from the longitudinal elements of the frame to the edge of the board. Canopies are attached at the same distance. Gates with a height of more than two meters are additionally reinforced with an average vein. If the gate frame is made of wood, be sure to use braces to maintain strength and geometry. When sewing the canvas, the boards can not be placed close. Leaving gaps will prevent buckling, deformation of the canvas due to increased humidity. If the gaps between the boards are unacceptable, you need to buy a grooved board.

Required Tools

You will need wood for the gate:

• bars for the frame of the gate with a section of 40 by 40 mm;
• slats for sheathing the frame 20 by 40 mm;
• round or square bar for supports with a diameter of 100 mm or more.

For the processing of lumber, assembly and installation, you need:

• wood saw or electric jigsaw;
• plane;
• drill with a set of drills;
• drill garden;
• plumb lines;
• rasp;
• a hammer;
• screwdriver, screwdriver;
• self-tapping screws;
• components for concrete mix (cement, sand, crushed stone);
• basin for mixing concrete;
• roulette, level;
• marking pencil;
• sandpaper;
• blowtorch;
• primer;
• brush;
• antiseptic for impregnation.

Required metal parts of the structure:

• canopies for gates - 2 pcs.;
• hinges, latch for the gate;
• loops for a padlock (if the gate will be closed from the outside).

Manufacturing and assembly process

In order to make a wooden gate with your own hands, you need careful preparation. Only after drawing up a design scheme, collecting the necessary materials and tools, you can start production and installation.

Installation and installation of poles

Post installation steps:

1. Clearing the site and determining the location of the pits.
2. Digging holes with a drill or a bayonet shovel to a depth of at least 1 meter, with a diameter of 10 cm more than a pillar.
3. Cutting pipes with a grinder and inserting them into prepared pits.
4. Backfilling the gaps with crushed stone.
5. Checking the verticality of the support with a plumb line.
6. Compaction of crushed stone to strengthen the foundation.
7. Mixing a liquid solution (1 part three-hundredth of cement to 3 parts of sand).
8. Pouring mortar into pits. Wait for complete drying.
9. Brick cladding. If you add washing powder to the mortar during laying, this will prevent the composition from settling. The correctness of the angles is periodically checked with a plumb bob.
10. After installing the pillars, their tops are equipped with caps (ready-made or cut from galvanized steel). This improves drainage performance and looks aesthetically pleasing.
11. Folded brick rows are embroidered after drying.

Parts of the wooden supports that will be underground must be treated with a water-repellent resin or bituminous mastic to prevent destruction.

The gates are mounted on poles. Therefore, they must be installed correctly, securely, with rigid fasteners. For the normal functioning of the structure, sagging is unacceptable. To prevent violation of the geometry of the gate, it is important to observe the perpendicularity of the supports in relation to the ground. Strengthening them into half a brick will not allow the pillars to warp. This width must be taken into account when drawing up a preliminary drawing.

Instead of wooden poles, you can install metal, brick or concrete supports. As an additional stiffener at the top of the support, it is recommended to fasten it with a horizontal beam.

Frame erection

The basis for the frame can be made of wood, metal profiles. In the second case, you will need a welding machine to connect the parts. If the gate frame is wooden, the timber is cut into the necessary parts and laid out on a flat place in the form of future gates. After checking the verticality and horizontality, holes are drilled in the bars. Details are fastened with self-tapping screws. It is fashionable to additionally strengthen the center and corners with the help of a cross beam and metal corners. Beams for reinforcement are attached across the frame crosswise at an angle of 45 degrees.

For fastening, you can take self-tapping screws or use dowels from dry wood. Nagels must first be coated with epoxy glue. To fix the skin in the center of the frame, a jumper is additionally installed. In the corners, jibs are attached - bars of 30-40 cm. When erecting a frame, its size should be taking into account the protrusion of the sheathing boards by 20-25 cm. It is convenient to collect and sheath in a horizontal position on the ground.

Sash manufacturing

The sheathed frame must be hung on the installed supports. After preparing the wings, metal hinges are attached. They are hung on the frame or on support poles. The optimal location of the loops is calculated in this way. From the top and bottom of the support, a distance of ¼ of the total height is planned. After marking, lancet hinges are attached, on which the sashes are installed.

The lower edge of the leaves must be at least 5 cm from the ground. Otherwise, snow or ice that has fallen will prevent the gate from opening. To prevent the sashes from opening from the wind, they need to be adjusted. When marking the attachment points, it is advisable to use a level.

Gate installation

Before installing wooden gates, the hinges are screwed to the leaves. At the same time, "capercaillie" are inserted. Before screwing in the bolts, holes are drilled to a depth of several centimeters in pre-marked places. Their diameter should be less than the diameter of the screw. This trick will make it easier to screw in the bolts. It is important to keep the distance from the ground to the sashes from 5 cm. After installation, the closed sashes are fixed with a padlock or a metal pin. The coating on the wooden surface is applied after the installation of the gate structure.

Structural sheathing

The frame is sheathed with boards, slats or a picket fence. The elements are attached to the base with self-tapping bolts. Various mounting options are used. For example, a picket fence is fastened without gaps vertically or boards with clearance diagonally.

Sheathing elements are cut to the desired dimensions in the required quantity. Pine boards are often used for sheathing. This type of wood is the most protected from climatic influences. After trimming, the elements are planed on all sides and attached to the frame.

When installing boards with gaps, a wooden lath is used as a template. The rail is taken equal to the length of the board and the width of the gap step.

Boards fixed with screws are cut in a straight line. The place of cut and unevenness on the surface is polished with sandpaper. The edges of the sashes can be insulated for better sealing and better thermal insulation.

Impregnation and coloring of wood

Installed sash remains coated with a primer, antiseptic solution, varnish. Wood coating products must be designed for outdoor use. Processing sequence:

1. Sanding wood with sandpaper or a grinder, including the processing of side surfaces.
2. Sealing the pores with putty and re-sanding after drying.
3. Toning for the appearance of the shade and texture of wood.
4. Applying a primer.
5. Coating with the first layer of varnish.
6. After drying, apply a second layer of varnish.

If iron forging is used as a decor, decorative elements are attached before grinding and painting. To protect the wooden canvas during the fastening of forged parts, a thin tin sheet is used. After varnishing, the joints of iron and wood are treated with a sealant.

Finally

For self-manufacturing and installation of wooden gates, you will need minimal skills in working with construction tools and your patience. All steps are simple and can be done if desired with your own hands. Like any construction work, a high-quality result is a combination of strict adherence to the recommendations of professionals, the use of high-quality materials, and accurate measurements. Wooden gates, as the face of your home, with a competent approach and periodic maintenance, will last for many decades.

When it comes to installing gates in a country house or in a suburban area, you should first of all decide what they will be, because it is the gates that catch your eye first. It is from them that guests begin their acquaintance with homeownership, so it is worth taking their construction quite seriously. It must be said right away that this task can be performed in different ways and from different materials. The choice must be made based on personal ideas about beauty, however, it is unlikely that anyone will argue that if there is a wooden fence, the gate should be made of wood.

Gate manufacturing

Before you make a wooden gate or gate with your own hands, you need to decide on their size and intended appearance, for which it would be quite advisable to make a drawing and calculate the amount of materials needed. After that, you can begin to perform the main construction work.

First you need to install the pillars supporting the entire gate structure. For wooden gates and gates, wooden poles are best suited. Regarding the material suitable for the material of the pillars, oak should be chosen. Its strength characteristics are quite consistent with the required.

The entire column, and most importantly, that part of it that will be underground, must be treated with special compounds that will prevent the negative effects of moisture.

After the pillars are prepared, they must be dug in. To do this, in predetermined places, you need to dig two holes about a meter deep.

At the bottom of each of them, sand and crushed stone are poured in two layers as a protective cushion. Layers need to be compacted to achieve the best effect. After that, poles are installed in the pits, the verticality of their installation must be checked using a building level, and it is better to use a water level. To achieve the greatest strength of the installation, the space that forms between the pillar and the walls of the pit should be filled with crushed stone. In order to save money, you can use chipped brick. After filling half of the space, the rubble must be tamped, then filled up again and tamped again, this must be done until the entire pit is filled.

Crushed stone is cemented on top for greater strength. In principle, a cement-sand mixture can be used to fill the entire space, but this will entail additional material costs.

Production of alignments

While the concrete hardens, it is necessary, without wasting time, to proceed to the manufacture of the gates themselves. First you need to build a kind of frame frame with your own hands. For these purposes, a wooden beam is suitable. If we consider the process in more detail, then it is necessary to assemble a rectangular frame of a pre-calculated size. It should be remembered that the frame must be smaller than the finished gate.

So, the individual parts of the frame are fastened together with self-tapping screws. Depending on the size of the wooden gate, the frame can be additionally reinforced with both transverse bars and bars fixed diagonally. As soon as the frame is ready, it is taken with boards, or with a solid wall, or decorative gaps are left, depending on the overall style. When the gates are ready, they need to be fixed on the poles. For these purposes, as a rule, suspension loops are used. Usually one part of them is attached to the post, and the second to the gate alignment. Given the material of manufacture, two attachment points are enough - at the top and bottom.

Completion of works

As the final stage in the construction of wooden gates in the country, you can designate the mounting of handles and all sorts of heck and bolts. These actions are necessary not only to avoid spontaneous opening, but also due to the fact that the gate must perform not only decorative functions, but also protective functions. If we talk about how expedient it will be to build a wooden version of the gate, then it must be said that such gates are quite practical and able to perform their functions for at least a dozen years. Of course, for this the tree must be prepared, that is, treated with special compounds that prevent the appearance of both rotting and wood pests. And also for greater aesthetics, wooden gates can be coated with a special varnish.

In conclusion, we can say that if you need not only to build practical and quite aesthetically attractive gates, but also to make them yourself, without spending a lot, then wooden gates are the most suitable option. With proper installation, such gates can serve faithfully for many years and be both the pride of the owner and the envy of neighbors. And usually, the more pride that either causes the owners, the more envy it causes the neighbors, but that's another story.

A photo

Video

We bring to your attention a few more gates made of wood for inspiration.