Balcony door seal adjustment. Adjustment of a plastic balcony door. Types of adjustments and necessary tools

In most apartments, the layout provides for a place for a balcony - although it is not always used correctly, it is quite possible to store at least a mountain of old things there. But what to do if the balcony plastic door has sagged, how to adjust it? Such questions have to be solved independently, which means that a certain scheme is required for this.

Is it possible to solve the problem on your own?

In fact, in most cases it depends on the type of problem that has arisen. That is, the question that concerns you will sound, not “How to adjust the plastic balcony door?”, But “Why does it not close?”

Almost every happy owner of balconies faces such problems - metal plastic doors may deteriorate over time. This is mainly due to the sagging of the hinges under the door's own weight. So now you will learn how to properly adjust the plastic balcony door, while avoiding many unpleasant problems in the future.

Why don't the doors close?

First you will need to answer exactly this question, and you can start working later. As it was said before, common cause there may be sagging of the door under its own weight, but this is not the only reason.

After all, the balcony is exposed to climatic and temperature influences, and therefore the fittings can become unusable. If this is exactly what happened, then you will have to look for the answer to the old question: “How to adjust the plastic balcony door?”, Because it is the adjustment in this case that will help solve the problem.

Problem Diagnosis

• The balcony door may touch the threshold - in this case, you must make great efforts to close it, lifting it by the handle. Here the problem is most often in loops - metal-plastic structures generally suffer from such problems. However, balcony doors are prone to such unpleasant cases more often, which is logical, given their dimensions.
• Also, the door can cling middle part, which will be an indicator of the deformation of the mechanism - it takes the form of a "barrel". Sagging loops can also be involved here, but more often the temperature deformation of the mechanism is the cause.
• If your door does not close completely, then you will have to ask yourself a slightly different question: “How to adjust the plastic balcony door for clamping?” It is in the clamping mechanism that the problem will lie.

Individual cases are mechanical damage lock or door handle. In this case, you just need to replace this part yourself.

Necessary tools for work

As with any repair work, it will not be possible to get by with improvised means, it is best to have a real set of tools at hand (however, every second man has one today). Here are the tools you will definitely need:

1. Wide flat screwdriver.
2. Crosshead screwdriver.
3. Pliers (it is better to have round-nose pliers on hand).

In addition, you will need to find adjusting keys that fit exactly the adjusting screws on your doors. Such information can be obtained either during self-examination, or on the manufacturer's website.

How to eliminate sagging?

If the problem found is caused precisely by sagging loops, then solving it is quite simple - you just need to pull top corner sashes to "their" loop. It sounds like you have a hard job ahead of you, but it's not. The door just needs to be lifted up. But in order to avoid problems, you are given an answer to the question of how to adjust a plastic balcony door with a diagram, a certain procedure:

• The first step is to install the door in a pivot position.
• The second step is to turn the screws on the top leaf (they should be near the hinge). You need to turn clockwise, because you need to pull the sash to the hinge, and not vice versa, relieve pressure.

The third step is to lift, in fact, the door. To do this, you need to use the lower screws - they are also located on the sash. The screws on the end are turned until the door stops clinging to the threshold.

The door should open and close easily, without effort. During the test, light pressure on the handle should be enough - if so, then you did everything absolutely right.

How is sash displacement eliminated?

This is the second most common problem with balcony doors. In this case, the door will cling to the middle part, and therefore it must be moved closer to the hinges.

With most metal-plastic doors, you can do this without removing the entire door from its hinges - Maintenance provided by the design.

• Door adjustment starts with the bottom screw. It is located near bottom loop: with the adjusting key you turn it until the door is in place.
• The same procedure is repeated with the top screw. As a result, you should get exactly standing door.

This may not solve the problem, for example, the hinges may be deformed at all, or even if fine adjustment the door continues to cling to the middle section. In this case, you should contact the manufacturer or the installation company - the latter often introduce such problems in cases with free repairs.

How to eliminate blowout?

In addition to the two already described causes of all problems, there is one more - no less common, but considered more of a consequence than a cause of the problem. The third situation that requires your intervention is blowing under the balcony door. This can happen when the door is closed position loosely pressed against the frame, leaving a gap between them - often imperceptible, but sometimes quite material. So here's a diagram for you on how to adjust a plastic balcony door that blows through:

• Adjustment of pressing the door to the frame from the side of the lock can be done either with an adjusting key or with pliers - you just need to rotate the pins that lock the elements.
• From the side of the hinges, in turn, the clamp is strengthened by pulling the hinges to the frame (how this is done was described above).

Conclusion

By now, you should have already understood that you can fix such malfunctions as sagging hinges, shifting sashes or blowing out on your own. The main thing here is to remember that each company makes balcony doors according to own design and therefore must be treated with the utmost care. However, the principle remains the same for everyone. So, we figured out how to adjust the Rehau plastic balcony door.

All malfunctions of a balcony door or window that occur during the period warranty service, eliminates the installer.

But as soon as this period expires, an invitation from a specialist will be required, which can be very expensive. However, many problems can be solved on your own, you just have to learn how to do it right.

Features of the occurrence of malfunctions of balcony doors

When the installation of a new balcony door is completed, the installers make its initial adjustment, thanks to which the door functions flawlessly for some time. However, this does not last indefinitely, over time, the density of the fit of the door decreases, the room enters cold air or other malfunctions appear and do not even help to prevent it.

With windows, they occur much less frequently than with a door. Many problems can be solved by adjusting the pressure of a plastic balcony door, which must be done correctly and in a timely manner. After all, solving small problems is easier than fixing large problems.

Therefore, it is not worth waiting for the balcony door to stop closing. If you notice that cold air enters the room, and the canvas is not quite tightly pressed against the frame, call a specialist or do the adjustment yourself.

Ensuring the normal clamping of the balcony door with your own hands

How to check the tightness of the door clamp

1. In order to determine whether adjustment of the pressure of the plastic balcony door is required, you need to take a sheet of paper, place it on the frame of the open door, close the sash and try to pull the sheet towards you.
   Such an action should be carried out around the perimeter of the door.

At the same time, it is important to note the strength of the efforts that have to be applied. If it becomes easy to do this, then the door leaf has lost its former pressing density.

1. If there are suspicions that door leaf it is not exactly level with respect to the box, you can do the following manipulation: close the door, circle the sash with a simple pencil, open the door and evaluate the evenness of the line.
   It is not forbidden to use the level.

With these simple methods, you can always identify problems in a timely manner and respond to them.

How to adjust the balcony door yourself

A plastic balcony door differs in many ways from a wooden one. Its main advantage is the possibility of a relatively simple.

On the modern market can also be found various designs plastic doors, however, the principle of their operation is similar, as well as the principle of their adjustment. Therefore, there is a general algorithm for correcting faults.

In order to do this, you need to have the following set of tools:

• screwdrivers (cross and flat);
• hex keys (better if it is a set);
• pliers;
• roulette;
• plastic pads.

The sequence of work when adjusting the door

Attention!

The sash is lowered by turning the screws in the clockwise direction, raised - in the opposite direction.

1. How should the pressure adjustment of plastic balcony doors, largely determines the design of the door. If the pressure is adjusted with a special striker on the profile, then it is necessary to place the hexagon in the corresponding groove and turn it half a turn.
   If you have a special trunnion, you will have to use pliers to turn it. The minimum pressure will ensure that the trunnion is parallel to the profile, the maximum pressure will be perpendicular.

And the last. If the situation cannot be corrected with screws, you can “pull out” the door a little. To do this, remove the glazing beads and insert plastic gaskets under the profile.

Thus, subject to the instructions presented, it will not be difficult to restore the normal clamping of the balcony door. You just need to correctly identify necessary funds and work with them carefully.

After installing double-glazed windows on the balcony, various difficulties often arise in the operation of the door. They can be fixed with service center(especially if the work was guaranteed). However, in most cases, it is quite possible to adjust the plastic balcony door on your own.

It is important to learn how to determine the cause of a malfunction and use the appropriate tools for repair. To do this, there are several simple test and step-by-step instructions that will be discussed in detail in the article.

Types and advantages of plastic balcony doors

Today, plastic doors are widely used, which have almost completely replaced outdated wooden counterparts.

At the same time, they can be equipped with different mechanisms, depending on which doors are distinguished:

In most cases, balcony doors are combined with windows that can be located along different sides from it (to the right, to the left and less often on both sides).

There are also free-standing doors, and they also have their own classification:

• consisting of one half (single-field)
• consisting of two halves (two-pole).

Schematically, these options are shown in the figure.

All of them have their own peculiarities in the mechanism. door lock, however, according to performance characteristics differ little. Accordingly, the problems associated with wear are approximately similar.

Along with plastic, metal, glass and even classic wooden doors are made, but the last two groups are much less common. Reason for popularity pvc doors in their simplicity and reliability:

• doors are easy to use - they are comfortable to close, open and use in any mode;
• they are quite durable and correct installation and operating conditions can work trouble-free for many years;
• they are easy to maintain in case of breakdowns;
• doors are aesthetic and fit easily into different types design.

Balcony door device

Before you understand how to adjust the plastic balcony door, you need to briefly understand its device.

In most cases it is used classic version with two windows and one door located to the right or left of them, as shown in the diagram below.

The door consists of the leaf itself and fittings, which perform two important functions:

• fastening the door to the jamb;
• ensuring the closing and opening of the door in different positions.

Handle and lock

The main elements of the fittings are a handle and a lock, which ensures reliable closing of the door and comfortable opening. Depending on the features of the locking mechanism, locks can be with a latch (roller or latch) or without it, as shown in Figure 1.

The handle is usually mounted only from inside the room. This is inconvenient in cases where it is necessary to close the door while on the balcony (for example, in winter). In these cases, an additional handle is installed from the outside, allowing this function to be implemented.

NOTE. In the case of installing a second (external) handle, it is important to make a lock from the inside so that outsiders cannot enter the apartment from the outside.

You can visually evaluate the convenience of such a device here.

Also, balcony doors can be made in different design, color, glazing area - for example, as shown in the photo.

Possible problems with the operation of the lock can be associated with the following reasons:

• Misuse is redundant mechanical pressure, strikes on the mechanism.
• Natural wear and tear of components.
• Pressure from the side of the door due to its skew towards the lock.
• Incorrect installation work.
• Poor quality materials.

Visual video instructions for repairing the lock mechanism

Latch

Along with the lock, the locking element is often equipped with a special latch, with which you can adjust the desired width of the open door. This is necessary in cases where the door is not equipped with a hinged mechanism, but it is required to open it for ventilation. The latch also prevents children or pets from accessing the balcony.

Schematically, the latch consists of the door fixing mechanism itself, which is attached to the surface with self-tapping screws, and a regulator that determines the opening width, as shown in the diagram.

Video latch mounting features

Determining the quality of the door on the balcony

All the problems that arise with the operation of the balcony door can be divided into 2 large groups:

• associated with improper installation;
• appearing with natural wear and tear.

Video - installation features of a balcony door and windows

Immediately after installation new door You need to check the quality of your work. There are some simple tests for this:

1. When closing the door, it is important to make sure that it is firmly pressed against the plastic surface along the entire perimeter.
2. The door must not move vertically - i.e. Normally, it runs perfectly parallel to the box.
3. When open, the door must remain stationary in the absence of influence (wind).
4. The door closes softly, without any extra effort;
5. The door lock is fully functional and functions in all modes (if the door is equipped with a folding mechanism).

Of course, along with this, the product should not contain any external defects, scratches, damage, etc.

Diagnosing problems: step by step instructions

To properly adjust the plastic door on the balcony, you first need to accurately determine the cause of the malfunction.

Door adjustment is needed in cases that are easy to determine on your own:

• The door closes tightly, with extra effort.
• When opening the doors, you also need to apply force.
• Air can be felt from under the door.
• In a calm position opened door cannot lock in place, “creeps” to one side.

Replacing the rubber seal

Very often, the problem area of ​​such a door (as well as many others) is the tightness of the closure. In winter and in windy weather, this is easy to check by the air entering inside.

ADVICE. Checking the tightness of the door closing is very simple. Walk along its perimeter with a lit lighter and pay attention to the flames. If it even sways a little from air currents, it means that there is a small gap in this place.

Basically, the problems are related to the condition of the special seal (usually rubber). It may show mechanical defects:

• uneven occurrence;
• lagging behind the surface in certain places;
• relief, swelling of the layer;
• scratches, cracks.

Accordingly, the rubber is replaced with a new one. This is the most correct option, since the seal is quite affordable, and repairing a damaged product will not allow it to serve as long as we would like.

The seal usually lasts a long time and only needs to be replaced when it is clearly worn. The sequence of actions for replacement will be as follows:

1. First you need to remove the old filler, carefully dismantling it around the entire perimeter.
2. Then a new rubber mount is inserted into the groove.
3. The seal is evenly lined around the perimeter, while it cannot be pulled - in this case, when cooled, it will stretch even more, which may cause cracks.
4. In the knots, it is glued with special glue.

NOTE. The seal will last much longer if it is impregnated 1-2 times a year with a special silicone solution. You can buy it in the relevant companies involved in the installation of plastic doors and windows.

Visually, the replacement of the rubber filler is shown in the video

Here is an option with plastic windows, but replacing the seal on the balcony door is no different.

Door Hardware Repair

The problem with the rubber seal is the easiest option for problems. However, that is what needs to be checked first. The situation is more complicated with deviations in the lock or other door fittings, because of which it cannot lean against the surface perfectly tightly around the entire perimeter.

In this case, the diagnostic sequence will be as follows:

1. First you need to slightly open the door and attach a sheet of paper to the surface.
2. Next, close the door so that it firmly presses the sheet.
3. Now you need to try to pull out the paper - normally it is pulled out very hard.

If at the same time the paper is removed from the clamping space quite easily, then there is a small malfunction. They can be eliminated by setting constipation to the maximum.

The sequence of actions will be as follows:

If the clamp is not tight enough, then you need to move on to a more complete study of the problem:

NOTE. If the width of the strip on the side of the jamb is about 3 mm, and on the side of the door handle it is 2 times larger, this clearly indicates a marriage during installation. In this case, you cannot fix the problem yourself. and the whole door will need to be reinstalled. To check this, you need to measure the width of the doorway at the top, middle and bottom. The values ​​must fluctuate within 1 mm.

If it is found that the door is already somewhat of the required size, while it is evenly narrowed, then the problem can be solved in another way - the sealing rubber must be replaced with the one that is supplied with plastic entrance doors.

This rubber is wider and can easily compensate for the difference found.

Balcony door: step by step repair instructions

To adjust the plastic balcony door, it is important to collect all necessary tools so that during work it was possible to perform all necessary actions At the same time:

• a set of different screwdrivers of all kinds;
• pliers;
• asterisk keys;
• hexagons of different sizes.

Further, the sequence of actions depends on the type of problem and the mechanism of the door itself. If it is normal, i.e. works only in the "open-close" mode and does not have a folding function, repairs will be much easier.

1. First you need to remove the white lining from the canopies, if any.
2. On the reverse side is a screw - it must be unscrewed with a hexagon.
3. Carefully turn the horizontal screw to achieve the optimal position of the door. For example, if the door clings from above, the top 2 screws are lowered.
4. Next, you need to check the position of the door, how it closes, and, if necessary, make additional adjustments.

NOTE. If the door diverges strongly, it can be adjusted by simultaneously turning all three connecting screws.

To adjust the clamp, due to the weakening of which drafts occur, a striker is used.

It has a hole where the hexagon is inserted and rotated halfway.

Video features of repairing a balcony door

the video material discusses the adjustment of the pressure of a plastic window, but its mechanism is similar to a balcony door

Ensuring correct operation of the handle

It often happens that it is not necessary to adjust the plastic door on the balcony itself, but the loose handle interferes correct work locking device. In this case, the problem is determined by extraneous sounds, turning the mechanism.

The situation is solved very simply - first, a decorative overlay is removed from the handle, and then the screws that fix it to the surface are pulled up to the stop.

Video instruction on how to adjust the plastic door on the balcony

Hinged balcony door: step-by-step repair instructions

The repair of the door, which, along with the usual mode, functions in the tilt mode, is not fundamentally different. But since the fittings in this case is more complicated, that is, its own characteristics.

door sagging

When the door clings to the threshold and noticeably sags, then the sequence of troubleshooting steps will be as follows:

If the door is located above the norm

In the opposite case, when the door clings to the top, the work takes a little longer. In this case, you need to adjust the position of the door using the screw in the scissors, as shown in the photo.

To do this, the door is opened, the screw is rotated with a hexagon until it takes the correct position. Then you need to check the correct operation - open and close several times.

Ensuring correct clamping

To properly adjust the pressure, you need to perform the following steps:

The door is opened and closed several times to check the quality of the work.

NOTE. In order for the door to work correctly and the fittings to last as long as possible, it can be lubricated a little with machine oil every year.

Problems that cannot be fixed on your own

All considered small-term repair work maintenance of a balcony door can be divided into 2 large groups:

1. Work related to leveling a sagging or pulled up door.
2. Work on regulating the force of pressing the door to the plastic surface.

However, there are some types of malfunctions that are associated with factory defects or mechanical action on the door that cannot be fixed at home:

1. Door hinges torn from the surface.
2. Complete or partial destruction of fittings (lock mechanism or door hinges).
3. Violation of the integrity of the seams of the frame or door, made during welding.
4. Crack or broken glass in package.

Such types of violations are eliminated only by professional workers. Often the question arises of completely replacing the balcony door with a new one or replacing the fittings.

NOTE. If a situation has arisen that you need to get into the apartment through covered balcony, then you can do this by simply breaking the glass. The fact is that replacing a double-glazed window is much cheaper than repairing the door itself, or even installing a new one. In addition, it is faster and easier to implement without calling additional services.

Repair of the door on the balcony is carried out only in case of obvious malfunctions. It is quite possible for a person without professional skills to adjust a plastic balcony door.

In each modern apartment plastic doors to the balcony. They are distinguished by many advantages: ease of use, unpretentious maintenance and speed of installation. Possible problem, arising after prolonged operation of the mechanism - skew and loose fit of the sash. Therefore, it is useful to know how to adjust the plastic balcony door in order to eliminate loosening due to regular opening, closing and airing.

Before proceeding with the diagnosis of the problems that have arisen and the subsequent repair, it is worth understanding the structure of the structure. There is a base unit, as well as spare parts for a plastic balcony door. Moreover, among the accessories there are both irreplaceable and optional parts. As a rule, in door block includes the following elements:

• a frame made of PVC profiles that connect special fasteners;
• sash assembled according to a similar door frame principle;
• hinges, thanks to which the structure closes and opens;
• handle and latch for PVC balcony doors;
• a sealant that ensures the tightness of the closure of the sash;
• double glazed balcony door.

In addition, the device may include additional elements, expanding the functionality of the balcony door: stoppers, mechanical or hydraulic sensors and other details.

The device of the handle may also differ: it can be stationary and movable, one-sided and two-sided, shell handles for balcony doors are popular. The latter option is in demand in families with children, as well as among people who smoke, because the shell handle allows you to conveniently close the door while on the balcony. For an apartment on the first floor, a good idea is a handle with a lock - a balcony latch for plastic doors, which allows you to secure the balcony from intruders.

When adjustment of a balcony plastic door is required

The price of a plastic balcony door is quite high, but buying an expensive high-quality model does not save you from frequent cases of mechanism breakdowns. It's all about its frequent use, leading to a decrease in the tightness of the sash.

In addition, double-glazed windows provide excellent sound insulation, while PVC guarantees durability. However, it is these materials that noticeably make the structure heavier, as a result of which it begins to sag under its own weight and ceases to close tightly. As a result, a noticeable draft appears in the room, and the insulation of the balcony does not help.

The normal position of the plastic door is as follows:

• if the door is open, it does not move on its own;
• no sash displacement;
• the leaf is tightly pressed against the profile of the door frame.

If so, intervention in door mechanism not required. However, if you notice the slightest deviation, you immediately need to repair plastic balcony doors. You should not delay calling the master, because with each opening and closing the situation will worsen. As a result, this can lead to balcony doors not closing at all.

Helpful advice! If the door installation warranty has expired and you do not want to contact a specialist, you can watch the video self adjustment plastic balcony doors and fix the problem with your own hands.

Types of balcony door malfunctions

If you are adjusting a plastic balcony door with your own hands, it is important for the success of the repair to determine the causes of the malfunction. Most often, the problems are as follows:

To test the door for tightness, slam the door with a regular landscape sheet of paper. Try to drag the sheet around the perimeter of the door. If it moves easily, the design has lost its tightness and needs to be adjusted.

Evaluate also the tightness of the pressure of the seal: unequal pressure of the gum, as a rule, indicates sagging. Determining the side of the offset is simple: pay attention to the place where the seal is squeezed and check if there is a trace from the sash on it.

How to determine the skew of the door leaf

If you suspect that the structure is skewed, cover the sash, and then run around the perimeter closed door with a simple pencil. Open the door and compare its outlines with the drawn line. The presence of irregularities indicates that the door is skewed. For the accuracy of the result, use the building level.

Suppose, as a result of measurements, you learned that the width of the drawn strip is 8 mm (an error of 1 mm is permissible). So, everything is in order, and there is no skew of the door. If the width of one strip is 12 mm, and the other 4 mm, this clearly indicates that the door is skewed by 4 mm.

Note! Sometimes it turns out that from the side of the loops the width of the strip is 3-4 mm, and from the side of the handle 6-7 mm. Such indicators indicate a narrowing of the sash by 4-6 mm - this is a manufacturing defect, and it makes no sense to move such a door.

Also check the width of the opening on all sides of the frame. The difference in measurements should not be more than 1 mm. Otherwise, the opening will be in the shape of a barrel - this happens if the installation is incorrect, when the middle of the frame is drawn to the wall more than the top and bottom. Such errors also lead to loose clamping. By measuring the width of the sash from all sides, you will determine the correct length of the impost. The difference between the three measurements should not be more than 0.5-1 mm. With indicators different from the norm, the length of the impost differs from the required one and causes the door to skew.

How to adjust a plastic balcony door: step by step instructions

To avoid mistakes or accidental damage to the double-glazed window of a balcony door (the cost of which is quite high), you need to figure out how to adjust plastic balcony doors correctly. When carrying out work, it is not necessary to overpay for the master: you can adjust the balcony door with your own hands - video instructions can be easily found on the Internet.

You will need quite a few tools to get the job done:

• hexagon;
• crosshead screwdriver;
• flat screwdriver.

Instructions and video: how to adjust plastic balcony doors when sagging

If you notice that when opening and closing the door, it scratches the lower edge of the frame, this indicates a sagging sash. Adjustment in this case can be vertical or horizontal.

Stages of horizontal adjustment:

1. Open the door wide to swing position.
2. A screw is located near the top hinge at the end of the sash. Take the hex wrench and turn it clockwise 2-3 times.
3. Remove the plugs covering the holes leading to the top screws.
4. Turn all screws under the plugs clockwise.
5. After adjusting the mechanism, check if the door now closes freely. Tighten the screws again if necessary.

To understand how to adjust balcony doors vertically, do the following:

1. Lift the door evenly and locate the screw at the bottom end of the hinge, located along its axis.
2. If the screw is covered with a plug, carefully remove it.
3. If you turn the screw clockwise, gently lift the door, if against, lower it.

Balcony door pressure adjustment and door handle adjustment

To tighten the handle for a plastic balcony door, you must do the following:

1. Slowly and carefully turn the plastic cover at a right angle.
2. Under plastic lid find screws for fastening. Pull them up.

If the handle does not turn well, sometimes it is enough to lubricate the lock special material, which does not contain resin and acid. In case of a complete breakdown, it is worth buying a handle for plastic balcony doors, unscrew the screws, remove the old part and put a new one in its place.

Helpful advice! good option is to install a magnetic latch on the balcony door. It will avoid too frequent exposure to door handle every time you close and open the door, which will have a beneficial effect on its durability.

If it blows from plastic balcony doors, it sure sign loose pressing of the sash. It is necessary to adjust the pressure of the plastic balcony door. To figure out how to adjust the plastic balcony doors to the clamp, look for locking elements on the door leaf. They are responsible for the density of the clamp.

Using a key or pliers, rotate the locking elements until the door is in the desired position. Professionals recommend periodically self-adjusting plastic balcony doors depending on the season. It is enough to figure out how to adjust the plastic balcony doors for the winter, and you can easily loosen the clamp in hot weather and compact in the cold season.

Sometimes adjusting the hinges does not help solve the problem, and then you can eliminate the tightness of the clamp with the help of a trunnion. For this you will need. To maximize the door pressure, install the trunnion perpendicular to the profile. To, on the contrary, achieve a minimum pressure, position the pin in parallel.

Replacing the seal and adjusting the door when the frame is scratched

It may turn out that adjusting the door pressure did not bring the desired result. This happens because rubber compressor worn out, and any door adjustments are meaningless without replacing it. For this you need:

1. Pull out the old rubber. This is done without much effort and you will not need additional tools.
2. Remove dirt from the inside of the groove.
3. Install new seal. Make sure that the side bend falls on the end of the sash.

Helpful advice! To facilitate the work, remove the sash from the frame: this way access to rubber gaskets will be free from the side of the loops. It is better to prefer a seal from the same manufacturer as the installed doors.

If the balcony doors do not close well and touch the frame, scratching its center, follow these instructions for self-adjusting plastic balcony doors:

1. Lower the sash to the bottom hinge.
2. Insert the adjusting key into the side screw and tighten the sash.
3. If the position of the door does not return to normal, repeat the procedure with the upper hinge.

Russian manufacturers of door structures are known in all CIS countries. Only the characteristic "Russian" already tells a lot about the consumer, who is counting on the purchase of high-quality and at the same time affordable products.

Varieties of door structures produced in the Russian Federation

At the plants and factories of the Russian Federation, entrance and interior doors, steel and solid wood, as well as lightweight options - MDF and veneered doors are manufactured.
Russian interior doors meet all the requirements of European standards. Most manufacturers have received ISO certificates, which guarantee the quality of production at all stages: from the selection of environmentally friendly pure wood before the sale of the finished door kit end user.
As for the door opening mechanisms, here Russian manufacturers also keep up with their colleagues from Europe and the USA. All configurations and a wide range of the lineup that meet any practical and aesthetic needs.
Types of mechanisms:

Features of Russian entrance doors

The most popular, perhaps, are the entrance doors "Russian Standard". They are also known as metal doors Russia. We are talking about super-strong and at the same time very stylish door sets that have increased characteristics of resisting any burglary attempts. These steel structures remain aesthetically attractive, because they are stylized as a tree. Entrance doors perform all protection functions, while embodying the most relevant and fashionable design solutions.
steel doors"Russian Standard" as a frame have a solid sheet of metal, 1.5 mm thick. Frame space filled mineral wool, which provides additional insulation and soundproofing. In addition, the input kits are equipped with a special seal, which eliminates any drafts and blowing.
Sheets steel protect systems from any deformations and attempts of direct breaking. And three types of locks (lever, cylindrical and one-sided night) - also from attempts of rough penetration with the help of tools, master keys or additional equipment (the so-called intellectual breaking).
A large assortment of input kits reflects the manufacturer's catalog. Some models look so that you will never suspect that they are made of steel.
Entrance doors Russian production is a proven durability as well as perfect combination cost and quality.

Wenge doors in the interior

Technical characteristics of interior doors

Domestic factories offer several types interior structures. Each variety has its own technical advantages and also different in price.
What are interior doors?

The main advantages of kits from Russia