Programmable thermostat. TEPLOCOM wireless room thermostats for heating systems Wireless room thermostats

To ensure comfort and save energy during the operation of an individual heating system, Bastion has developed a line of thermostats and heat controllers under the TEPLOCOM brand.

Room thermostat- a device for adjusting and maintaining a comfortable temperature in the room. The user sets the desired comfortable temperature in the room, and the thermostat, controlling the climate equipment, maintains the set value. The use of a room thermostat increases comfort and provides significant savings. Energy savings of more than 30% can be achieved depending on the type of room thermostat

Types of room thermostats

Mechanical room thermostat

A mechanical thermostat is based on a temperature-sensitive element that changes its mechanical properties under the influence of temperature. Expanding and narrowing the temperature-sensitive element closes or opens the relay, thereby turning on or off the heating equipment. The disadvantages of a mechanical thermostat are a very large error, lack of flexible settings, no indication and no economy mode. A mechanical room thermostat does not allow for maximum comfort and great savings.

Electronic room thermostat

The electronic room thermostat is the most modern way to regulate the temperature. It is based on a temperature sensor and an executive relay. The electronic thermostat provides high accuracy of temperature maintenance, indication of the temperature and the state of the boiler, the ability to turn on the economy mode, the ability to program, which allows you to maintain maximum comfort and economy.

TEPLOCOM electronic thermostats use a highly sensitive temperature sensor with a small error, which allows achieving maximum control accuracy.

All TEPLOCOM thermostats have a frost protection function, in any mode set, the thermostat will give a signal to turn on the boiler when the temperature drops to 5 °C.

Programmable room thermostats provide greater comfort and savings. The programmable room thermostat automatically changes the temperature according to the schedule. For owners of a country house, a programmable thermostat will maintain an economical heat mode on weekdays, and by the time it arrives, it will switch to a warm-up mode in advance.

Bastion programmable thermostats have additional functions:

Pump protection function. In summer, when the heating pump is not used, the thermostat once a day gives a signal to turn on the pump for 15 seconds to avoid its acidification. Thus, periodically scrolling the thermostat extends the life of the heating pump.

The function of setting the minimum and maximum temperature values. TEPLOCOM thermostats are designed so that it is convenient for the user to adjust the temperature at the touch of a button, but for child protection, TEPLOCOM programmable thermostats have the ability to set a quick temperature control limit.

vacation function. When leaving, the user sets the number of vacation days and the temperature value during the vacation. At the end of the holiday, the thermostat will switch to the main program.

Modern heating systems should not only provide the necessary amount of heat, but also make living in the house really comfortable and at the same time achieve energy savings. Room thermostats in the home heating system allow for precise temperature control in individual rooms of the house or apartment. The use of modern wired and wireless room thermostats can achieve a reduction in overall energy consumption.

Modern room thermostats allow:

• ensure accurate and efficient temperature control;
• provide different modes of operation of the heating system at different times of the day;
• provide programming of operating modes by days of the week or during specified periods;
• ensure a reduction in energy costs;
• provide separate regulation of air temperature in different rooms of the house.

Wired and wireless room thermostats

Remote thermostats for heating systems are usually divided into two groups:

1. wired thermostats;
2. wireless thermostats.

Wired room thermostats

Wired thermostats are connected to a gas heating boiler or other heating appliances using wires. The cost of wired thermostats is lower. The design of the devices is simple, and they have high reliability in operation. Wired thermostats can be mechanically or electronically controlled.

Wireless room thermostats

Wireless thermostats are connected to the gas boiler via radio and do not require a separate wired line.

Structurally, wireless thermostats have two blocks. One block is the control, the second block is the receiving device. The control unit of the wireless thermostat is installed indoors in a convenient location. The thermostat receiving unit is installed directly next to the heating boiler or other heating equipment and is connected to it. The maximum distance between blocks may vary depending on materials, wall and floor thicknesses and ranges from 20 to 100 meters.

The control unit can be equipped with an LCD display, temperature sensors and control buttons. The thermostat control unit can play the role of a programmer and allows you to program the operating modes of the heating equipment.

When choosing a wireless room thermostat, you should pay attention to the technical characteristics of the device, functionality, and reliability of the device. A quality room thermostat should have a long factory warranty.

TEPLOCOM wireless thermostats for heating systems

A well-known Russian manufacturer of power supplies and automation devices, the company " Bastion» launches a line of modern thermostats TEPLOCOM TS. A detailed description of all TEPLOCOM room thermostats can be found in the Thermostats section.

In TEPLOCOM wireless room thermostats the signal is transmitted over a radio channel, and the thermostats are powered by batteries.

To install a wireless thermostat, there is no need to lay wired lines, this is especially true if the thermostat is installed after repair work in the house. The high transmission power of the radio signal makes it possible to install the TEPLOCOM wireless thermostat in any room. To transmit information, a frequency of 868 MHz is used, which makes it possible to increase the signal transmission distance.

In TEPLOCOM wireless thermostats two-way communication between the thermostat control unit and the receiver unit is used. This approach can significantly increase the reliability of the system by controlling the transmitted information.

Wireless thermostat TEPLOCOM TS-2AA/3A-RF

• the presence of an LCD display;

Wireless thermostat TEPLOCOM TS-Prog-2AA/3A-RF

The wireless thermostat has the following features:

• signal transmission at a frequency of 868 MHz;
• large range of wireless connection up to 100 m;
• high power relay contacts up to 250 V, 3 A;
• wide adjustment range from 5 °С to 35 °С. ;
• the presence of an LCD display;
• temperature indication in the room;
• indication of the boiler operation mode;
• indication of the operating mode of the heating system;
• indication of emergencies;
• control of the availability of wireless communication;
• possibility of temperature calibration;
• limiting the boundaries of temperature change;
• the ability to turn on the night mode;
• Possibility of programming weekly operating modes;
• the ability to turn on the "vacation" mode;
• the ability to change the hysteresis value;
• the presence of the function of protecting the pump of the heating system;
• support for normally open and closed control logic;
• the ability to connect to a thermal drive or a heating boiler.

TEPLOCOM wireless room thermostats are reliable devices that allow you to effectively control your heating system. TEPLOCOM thermostats can be connected to gas boilers from various manufacturers.

The factory warranty period for TEPLOCOM room thermostats is 5 years!

Built-in thermostats are installed in the same way as flush switches. Power is supplied via a 220 V network. The advantage of this type is the absence of batteries (batteries).

Programmable room thermostats provide greater comfort and savings. The programmable room thermostat automatically changes the temperature according to the schedule. For owners of a country house, a programmable thermostat will maintain an economical heat mode on weekdays, and by the time it arrives, it will switch to a warm-up mode in advance.

Make an individual schedule

TEPLOCOM thermostats use a highly sensitive temperature sensor with a small error, which allows for maximum control accuracy.

Peculiarities. The built-in programmable room thermostat TEPLOCOM TS-Prog-220/3A provides

• Built-in housing in the socket
• Direct control of thermal drive and boiler
• Large LCD display
• Room temperature display
• Boiler status indication
• Temperature calibration
• Setting an individual program for weekdays and weekends
• Setting the maximum and minimum temperature limits
• Setting the display brightness
• Frost protection function of the system
• Working with normally open and normally closed thermal actuators

Wired electronic room thermostat. Powered by two AA batteries, 2 pcs. Relay contacts - up to 250 V, 8 A. Adjustment temperature - from 5 °С to 30 °С. Hysteresis - ±1 °С. LCD display. Indication of room temperature. Relay status indication. Low battery indication. Thermostat on/off button. Freeze protection of the system. Work with normally open or normally closed logic.

Guarantee: 5 years

Product code: 911

Price with VAT

Boiler control. Savings on heating up to 3000 rubles per month.

Created for:

Advantages

Convenient push-through mounting simplifies wall mounting	Universal connection for normally open and normally closed loads suitable for all types of climate systems
Convenient temperature setting
Safe shutdown in summer - the thermostat goes into frost protection mode. In the event of an unexpected cold snap at the beginning of the next heating season, the thermostat will not allow the system to freeze

Display

TEPLOCOM TS-2AA/8A easy to use, unlike analogues, it provides indication of the current temperature, set temperature, relay status, indication of imminent battery discharge.

Possibility of safe shutdown of the thermostat with the transition to frost protection mode.

It does not require a 220 V power supply to the thermostat, as it is powered by batteries. The battery charge is enough for more than a year - the circuitry uses an economical power consumption mode and an optimal screen size.

in thermostats TEPLOCOM a highly sensitive temperature sensor with a small error is used, which allows achieving maximum control accuracy.

Features TEPLOCOM TS-2AA/8A

• LCD display;
• room temperature indication;
• boiler status indication;
• low battery indication;
• thermostat on/off button;
• protection of the system from freezing;
• work with normally open or normally closed logic.

Specifications TEPLOCOM TS-2AA/8A