Wooden gazebo benches. Do-it-yourself bench in the gazebo - an overview of the simplest solutions. The classic bench

A gazebo without furniture is like cheese without milk and sausage without meat. It is of no use in this performance. You won’t rest in it after a hard day’s work and you won’t arrange gatherings with friends. That is why the arrangement of the gazebo should be taken seriously. If you want to save money at the same time, then in principle you can always make furniture for the gazebo with your own hands. How to implement it? This will be discussed in the article.

How garden chairs and a table in the gazebo will look depends largely on how the constructed structure looks like, namely, we are talking about the materials from which it is made and its configuration. So, the furniture can be:

Portable or built-in. It is up to you to make built-in furniture during the construction of the gazebo or after the completion of this process. You can also make a built-in table with portable chairs / benches or vice versa. It all depends on your preferences. If you decide to install built-in furniture, then you should take into account the fact that the distance between the table and the bench should be within 5–10 cm.
From different materials. For example, if the gazebo is wooden, then in order to achieve harmony, tables with chairs made of wood should also be made. And if the frame of the building is made of metal, then the base of the table with chairs should be appropriate.
With different width benches. A person with normal weight will feel comfortable on a bench 40–60 cm wide. If you and your family members do not have problems with being overweight, then benches of this width can be made. Well, if the situation is different, then it is better to add a few centimeters to the proposed width.
Various configuration. If you have a hexagonal gazebo, then the best option for its arrangement there will be a six- or octagonal table. Another option is to make the table round. In a rectangular gazebo, it is better to install a rectangular or oval table. That is, the table according to the configuration should correspond as much as possible to the shape of the gazebo.

The table is the essential item in the gazebo. Of course, you can purchase a plastic table, which is of low cost, but it is much more pleasant to make this design yourself. You can make furniture High Quality, on affordable price and according to the design you like.

Before you make a table / chairs for the gazebo, you should purchase the appropriate building materials. The easiest way is to take a large log, cut it in half horizontally, process it with a planer and install it on the corresponding leg. But this solution may not be practical. Therefore, we suggest you build a table from boards and beams. The result is a strong and stable structure.

All measurements and preparation of parts must be done very carefully. It is better to make a table from an expensive quality wood. Before you start buying and cutting wooden elements, draw a drawing of the table on paper. Put dimensions on it, which will allow you to calculate the amount of material with maximum accuracy.

First, make a countertop. Alternatively, assemble it from boards or use a ready-made furniture board. The optimal size of boards for the manufacture of countertops is 75 × 25 mm. To prevent loosening of the tabletop, attach several guide bars to it from the back. The easiest way to fix them with self-tapping screws.

If you arrange the guides diagonally, then you will have the opportunity to make in the table drawer. It will be possible to store various little things in it.

So, to make a box under the tabletop in the middle of the long edge of the table, fix 2 beams with a section of 50 × 50 mm. The distance between the bars should be 30 cm. C inside bars, fix 2 slats. They will serve as guides for the drawer. It's time to make a box of the appropriate width, that is, equal to 30 cm. Stuff the same 2 slats on the sides of the box and the slats corresponding to its width in front and behind. Place the drawer under the countertop.

If the table is mobile, then all you need to complete its manufacture is to install 4 strong legs. But, in cases where the table is built-in, to install it, you must first install the foundation. It can be concrete or brick. A simpler solution is to make stable strong legs, dig them in and concrete them.

The frame of the table should be 15–30 cm smaller than the tabletop. This must be taken into account when installing the legs.

If massive bars were chosen as the legs for the built-in table, then before installing them in the recesses, the wood should be treated with a special protective composition from decay. Then install them, check the verticality, fix and fill the solution. For the table to be stable, you need to wait a few days for the concrete to harden.

The optimal height of the table is 75–80 cm. This means that the height of the legs depends on the thickness of the tabletop.

Before screwing the screws and installing the mounting brackets, lubricate the attachment points with an adhesive, for example, PVA with fine sawdust.

Next, attach the tabletop to the legs. Sand the table and apply an antiseptic on it, and then a flame retardant. After the table has dried, you can open it with varnish or paint it. Apply paintwork in several layers. The structure is ready.

The gazebo can be equipped not only with benches, but also with chairs or sofas. You can make any of the listed seating products from the remains after construction. For example, a seat and a back can be built from the remains of a tree, and a chair / bench support from a stone.

Benches can be installed on both sides of the tabletop. In this case, they must correspond to the length of the table. They can also be installed along the perimeter, so that all vacationers can see each other in the process of communication.

For convenience, the table can be made folding or not installed at all. So, to make a bench without a back, you will need:

wooden seat;
4 legs;
fixture.

Such a simple bench can be made in just a few hours. To make it, you just need to connect a wooden seat with legs. The principle of operation here is the same as in the manufacture of a table with legs from a bar.

To make a wooden folding chair you will need:

screwdriver / drill;
plane;
jigsaw;
chisel;
grinder;
cutters for grooves;
drills for making holes of various diameters;
wood screws, having a length of 7 cm and a diameter of 8–10 mm;
varnish/paint.

Beam with a section of 25 × 40:

for a long leg - 91 cm long, 2 pcs.;
for a short leg - 55.7 cm long, 2 pcs.;
for sitting - 31.5 cm long, 2 pcs.;
34 cm long, 6 pieces;
for the back - 42 cm long, 1 piece;
for jumper - 34 cm, 1 pc.

Jumper with a diameter of 18 mm, length 34 cm - 3 pcs.

card loop for attaching to the back leg of the chair and the bottom of the seat - 2 pcs.;
bolts Ø=8 mm, length 70 mm - 2 pcs.;
washers for Ø=8 mm - 6 pcs.;
furniture dowels Ø=10 mm, length 50 mm - 2 pcs.;
cap nuts - 4 pcs.;
waterproof glue for woodworking;
hairpin Ø=8 mm, length 470 mm with double-sided thread.

First of all, make a plan of action and draw a drawing. Cut out pieces according to size. They need to drill holes and make grooves with a cutter. Build the connections in this order:

On the support bar, insert the slats into the groove with a spike.
Glue the details.
Insert furniture dowels into the holes at the ends of the seat, having a depth of 30 mm.

In the next step, assemble the chair frame:

To the racks you need to fix the back with glue, and on their lower side - the crossbar.
The seat dowels should be inserted into the guide grooves on the legs.
Install the stud under the seat by screwing M8 cap nuts on both sides of it.
Glue the cross bars into the back leg.
Bolt the front and back legs together to make a folding chair.
Now you should screw the seat to the rear legs. This can be done using ombre loops.

Finally, the chair or chairs, if you have collected several, should be painted with protective agents.

The manufacturing technology of a folding chair was given above and, perhaps, not everyone will master it. And it will take a lot of time to make several of these folding chairs. Therefore, we will now look at more simple methods production of furniture for the gazebo.

One way is to use saw cuts big trees. You need to cut the trunk from both sides to fix the bench from the tree. On two large saw cuts, you can install a massive countertop, which is also easy to make. Connecting the tabletop to the base is very simple. Next, you will need to process the tree and install the entire structure in the gazebo. The photo shows how simple this design is.

If you need less massive benches, then saw the trunk lengthwise into 2 parts. Make a notch in it from the bottom side for installation on saw cuts of a smaller diameter. Lay the trunk on the "legs" in the gazebo and process the wood.

Do you only have stumps at your disposal? Do not be discouraged, it will be quite possible to decorate your original gazebo with furniture from them. Small stumps will be used as chairs, and a large stump will be used for the base of the table. The photo shows a tabletop in the form of a cut of a large saw cut, but if you don’t find one, then it can be made from a wooden shield, cutting it out, for example, in a rounded shape.

A built-in table in the gazebo can be built from brick, possibly left over from construction. This design will serve you faithfully for many years.

To make this table, you need to follow the step-by-step instructions:

First of all, strengthen the base for setting the table. Dig a small hole, fill the bottom with rubble and level it. Lay a waterproofing layer on it. Then fill the base with concrete.
Now make a square table base. Dimensions: 2-3 bricks in length and 6-8 in height.
Place a countertop on this base. It could be wooden shield or a piece of stone. It all depends on your financial capabilities.

A simple wooden table won't take you long to make, but will last a long time. Approximate dimensions are shown in the photo.

Manufacturing sequence:

Make a drawing. Prepare tools/materials.
Supports may have different shape, but are usually used X-shaped legs. To make them, fix 2 bars in the center at an angle of 45º. For reliability, they should be strengthened from above with additional slats.
X-shaped legs should be connected with two bars, which are installed parallel to each other and correspond to the length of the table.
The tabletop can be made from 5-7 boards. Install it on prepared supports. Use furniture corners as fasteners.

Upon completion of all work, treat the table with paints and varnishes.

This article describes different methods making garden furniture that can be used to equip a gazebo. One of the options will be right for you. Perhaps you have already done this work? From what material did you make furniture for the gazebo? What materials and drawings of furniture would you recommend to our readers? Your recommendations can be very helpful. Share your experience in the comments to the article.

Video

The sequence of manufacturing garden furniture for the gazebo:

A photo

This selection of photos will help you decide on the choice of furniture for the gazebo:

Scheme

The schemes we have proposed will help you make furniture for the gazebo with your own hands:

The gazebo is one of the main attributes of country life. Here you can relax, play board games, chat with friends, arrange small family "gatherings". But for all this to become possible, a table and benches must be installed in it. Garden furniture not only fulfills its main function but also creates an atmosphere of warmth and comfort.

Wooden hexagon table big size fit into any conversation

Types of tables for gazebos

According to the shape of the tabletop, there are 3 types of tables:

square (rectangular);
round;
polygonal.

The most popular and convenient are round tables. The smooth shape turns them into perfect option for all types of gazebos.

In the manufacture of tables, several materials can be used: metal, plastic, wood, as well as their combinations. Each of the options has its pros and cons. Metal tables are durable, but they are expensive and get very hot in the heat. Plastic options They're inexpensive, but they don't last long.

The combination of wooden tabletops or seats with brick bases looks very interesting, especially if the same materials were used in the construction of the gazebo.

Most available material wood is considered for the manufacture of furniture in the gazebo. Wood is environmentally friendly, easy to process, and has an acceptable cost. Wooden table can be bought at any specialized point of sale, but the owner will be especially proud of the furniture made by himself.

Preliminary preparation

An approximate scheme for the construction of a wooden rectangular table and benches

Before starting work, you need to consider several important points:

The size of the table must match the design of the gazebo. If the space is small, then it is better to dwell on the classic version - a tabletop fixed on a solid rack. If space allows, then you can install a table on two supports.
The shape of the countertop should be in harmony with the configuration of the gazebo. For example, polygonal or round tables are considered a good option for 6-sided buildings.
The optimal table height is about 80 cm. But here you need to focus on average height family members.
It is advisable to think in advance whether the table will be portable or stationary and decide on the number of legs.
The size and arrangement of furniture should not impede movement within the building.

Portable furniture - great option for small arbors. If necessary, it can simply be removed or rearranged to another location.

Instruments

For the manufacture of wooden table You will need a specific set of tools:

electric or chainsaw (you can use a simple hacksaw);
chisel;
axe;
a hammer;
electro cutter;
roulette;
sandpaper.

If you have the skills, you can easily make a wooden table of any shape with your own hands.

Some nuances of the installation process should be taken into account:

Fasteners must be made of stainless materials.
Nails can loosen over time, so assembly is best done with anodized wood screws.
To extend the service life, wooden parts must be treated with special antiseptics.
If the upcoming work is new for the master, then it is better to practice in advance on unnecessary details.

Wooden portable table

A portable table made of boards is a strong, stable, reliable and lightweight design. The dimensions of the countertop should correspond to the dimensions of the gazebo itself.

Assembly steps

Tabletop:

Mark the required length of boards.
Cut material.
Fix boards.
Using self-tapping screws, install several guide bars on the back of the structure.

Legs:

Table legs are made from the same material as the tabletop.
The number of supports depends on the size and shape of the table.
The legs of the structure must be stable.
When installing supports, the level of the floor should be taken into account. The slope of the surface must be compensated for by different leg lengths.

Each element of the future table must be carefully sanded and treated with an antiseptic!

At the end of the assembly, at least 2 layers of varnish must be applied to the product.

Timber table

For work, you will need from three to five bars.

An example of a rectangular table made of natural timber

strong and reliable table it will turn out only from even and carefully fitted bars to each other.

Stages of work

Legs:

Measure 4 pieces of timber: two - from 0.5 to 1 meter wide, two - a little smaller.
The long bar will become the base of the legs, and the shorter one will lie on top.
Fit the material to each other, connect with carpentry glue or self-tapping screws. For reliability, the bottom side can be fixed with rails.
Cut off another piece of wood equal to the length countertops.
Lay it across the assembled structure.
Further, the collection proceeds similarly to points 1-3, only at first the timber is laid shorter, and then longer.
Fasten the parts with wood glue.
Lay and fix wide thick boards on top.

In order for the wood to grab as tightly as possible, let the table stand for several days under heavy oppression (for example, under several bags of mortar).

In conclusion, it is necessary to process sharp corners and sand the surface. Don't forget about protective equipment: water-repellent compositions and parquet varnish which will extend the life of the table for several decades.

Table on the base

A wooden table in the gazebo will become a more reliable structure if you install it on the foundation.

Assembly steps:

Make a tabletop and legs, but do not connect them.
Dig as many holes in the ground as there are legs at the future table.
Install racks.
Check the verticality of the legs.
Fill the holes with concrete.
Wait for the solution to dry completely and fix the countertop.
Cover the structure with several layers of varnish.

Stump table - simplicity and originality in one bottle

Table for giving from a stump - original solution gazebo design

A table for a gazebo can be made from an ordinary stump. It will be an original and environmentally friendly design that will appeal to lovers of everything unusual.

To work, you need a wide stump. If there is nothing suitable in the country, then the material can be found in the nearest forest.
Dry the workpiece.
Using a chisel and a chisel, remove the bark from the stump.
Level the surface with a planer.
Sand her down sandpaper.
Clean cracks from dust.
Coat the structure with varnish or paint for wood.

In order not to damage the floor of the gazebo, you need to use wheels or a furniture stand to install the table.

This table itself is original decoration gazebos, but for additional decoration, you can use mosaics or tile pieces.

A round wooden table is one of the most popular solutions for a gazebo.

If the gazebo small size, then you can install round table on one leg.
Assembly steps
Leg:

To make a support, it is necessary to take a beam with a cross section of at least 10 by 10 cm.
Drill a hole in the bottom of the future leg.
Clean the recess from dust and coat with epoxy glue.
Insert a pin made of wood or metal into the hole (with its help the table will be kept on the floor).
Drill a hole in the floor.
Make 4 sawn spacers and fix them on the support with self-tapping screws or glue.

Tabletop:

Take a grooved board and assemble a rectangular or square shield from it.
Drive a small nail into the middle of the structure.
Build a homemade compass. To do this, take a long thread, tie one end to a nail, and to the other - to a pencil. Pull the thread and draw a circle on the tabletop.
Cut the workpiece.
nailed to bottom side designs 3-5 crossbars.
Connect the base and table top.
Fix the structure to the floor.

Hexagon table

A table on two legs with six sides will become excellent choice for a small gazebo

The manufacture of a hexagonal table is preceded by a certain preparation. It is necessary to draw up an accurate drawing of the product, make calculations, cut and process the material.
Assembly process:

Draw a circle on the ground and mark the corners of the future countertop.
Using self-tapping screws, secure the outer row of boards.
Take 6 boards and fix them with each other in longitudinal direction according to the following scheme: one end is attached in the center, the other - in the corners.
Lay out the transverse rows of boards, starting with the outer row.
Make legs and fasten them on the inside.

Video - Do-it-yourself hexagonal table

Mobile table

Mobile furniture in the gazebo - compact and lightweight

The advantage of a mobile table is the ability to remove it for the winter (which will extend its life). In addition, during friendly gatherings, the table can be taken out of the gazebo, freeing up space for dancing or other purposes.

The installation of a mobile structure differs little from the assembly of a stationary one.

Take 2 beams, the length of which is 8-10 cm less than the length of the countertop.
Fix the boards with self-tapping screws, making sure that there is a free distance of up to 5 cm to their ends.
Screw the longitudinal bars to the tabletop.

The cross and longitudinal bars must be fixed at a right angle.

Make 4 square legs and secure them with spacers.

Benches (benches) for gazebos

Making a bench for a gazebo is no less exciting process. Subject to standard sizes 3 people can easily fit on it.

Benches in the gazebo will save space and help accommodate many guests

Assembly steps:

Take boards 15 cm wide and 3.5 cm thick (the length of the material should correspond to the length of the wall along which the bench will be installed).
Process the blanks with an electric planer.
Round and sand sharp corners.
Cut a piece of timber (5 by 5) along the length of the boards.
Also prepare 2 pieces of each 40 cm from the timber.
Take 5 bars measuring 30 by 50 mm and cut off the corners of each on one side - you will get stops under the seat.
Saw off five 50-centimeter bars and cut off the corners on both sides.
Paint and varnish all the details.
After drying, fasten the beam (5 by 5) to the posts of the gazebo.
Install 2 supports under the beam.
Fasten the prepared stops over the timber after 50-70 cm.
Substitute a special spacer under each stop.
Fix the boards on the stops.

Making wooden tables and benches for a gazebo with your own hands is a great chance to show your skills and save money. family budget. The only thing you should not forget about the observance of safety rules and the choice of reliable and durable materials. And then each visit to the gazebo will be a pleasant reminder of your own skill.

If you have landed on this page, then most likely you have a need to buy or make a bench for a gazebo.

This article will collect the most interesting options for benches and benches that you can equip your recreation area with. We will also analyze the construction process wooden bench on your own, as you can save money on this subject, and get even better results.

Set of wooden benches and table

You can read more about the furniture in the gazebo in the publication -.

Many owners do not pay this furniture Special attention. They put what came to hand first, and forgot. The table gets dirty over time, the chairs are deformed, the bench staggers, and no action is taken.

I would like to draw attention to the fact that the recreation area should be at least neat and comfortable. If at least one of these factors does not match real situation It's time to think about changing it.

The meaning of wooden benches and benches is about the same - to put people on flat surface to be comfortable and safe. Depending on your desire, you can add a back to the design of the bench, then the gatherings will be more comfortable (although this is not always appropriate).

Massive wooden bench

Below are photos of options for arranging gazebos with benches. Examples will be shown with and without backs, as well as from a combination of materials - wood and metal.

Bench without back

Easiest, cheapest and reliable option this is a shop. It fits perfectly into any interior, does not take extra space and allows you to sit at the table maximum amount of people.

As with any seating furniture, one of the most important indicators is its stability.

You will be surprised when you start checking country furniture your friends or even your own, and you will not find almost a single item that would ideally stand on the surface (if you have not dealt with this issue before).

The bench may be flat, but the floor surface is no longer there. A number of questions immediately arise - to change the floor, sit on an unstable bench, or modify it to match the unevenness of the floor?

These are the problems that summer residents face when it comes to organizing a recreation area. So buying or independent production a good shop may be more difficult than you originally calculated.

Bench with back

The variant with a back is more comfortable and aesthetically pleasing. Its design is noticeably more complicated compared to the shop. To install it, you may need an emphasis on a wall or a “dead” mount to the floor.

Therefore, before looking at anything, it is necessary to measure the dimensions of the inner area of the gazebo and ask yourself the question - what optimal size benches should be and how to place it.

In terms of appearance and quality, they can be completely different.

It can be a thick solid oak that will stand for another 50 years, or it can be a structure made of boards that will rot, deform and require additional care.

There are many ideas (I have seen over 30) how to make a bench out of old furniture- chairs, beds, chest of drawers and the like. If you approach this issue creatively, then the result will not be as "collective farm" as it seems at first glance. A couple of examples are below.

From old chairs

From an old bed

From wood and metal

You could see similar pairs of tables and benches on city streets, parks and squares. Most often it is a metal base and wooden table top(if we are talking about a table) or a wooden seat and back (if we are talking about a bench). This design allows you to reduce the size of the furniture, which is extremely important in the limited space of the gazebo.

folding

A convenient option for giving is a folding bench. Due to its design, it is very easy to carry it from place to place - this is especially true for those who will constantly carry this bench from home to gazebo and vice versa.

If this option solves your problems of a similar plan, then for 1850 rubles you can buy it in the store " wooden world».

Set of table, benches and chairs

Online stores rarely offer to buy a single item. The most common are kits. different formats, the basis of which is a table, and in addition there are already chairs and / or benches. By the way, in addition to the bench, we talked about this in detail in another publication.

I would also like to introduce you to them, it is likely that one of the examples will hook you and decorate the interior of your gazebo in the future.

Larch table, benches and chairs set

Instructions for self-production

It seems to be such an elementary thing - a bench. He sat down, leaned on his back, stretched out his legs, rested. But if you think about its design, then a completely logical question will arise: “How to make sure that it does not tip back?”.

In order to answer it correctly, it is necessary to study the experience of professionals and amateurs who have already studied this moment. Below we will look at an example of building a wooden bench for a gazebo.

Building material and tool

To make a bench, we need:

Sergey Kudravets with a board

Boards (can be unedged);
A circular saw;
cutter;
Bulgarian with a grinding wheel;
Screwdriver;
Self-tapping screws.

What parts does the bench consist of?

All the work is to make four parts of the bench from the board, after which they are all connected. To create a shop you will need to cut out:

Tabletop (seat);
Jumper (dressing);
Two legs.

All parts are shown in the photo below. Before you start working with a tree, you need to create a drawing of the shop that you need. "Anyhow what" size does not fit, you need to take the dimensions from the gazebo, and then design our product.

Components of a shop

Video

Below are two approaches to making a bench (amateur) and a bench (professional). Both items are made in-house from classic building material- tree, but the approaches are completely different, as is the end result itself.

The first video will show the shop described above. This video will teach you how to make it yourself. The second is more for self-development, because not everyone has such a workshop at hand in which one can create (in the good sense of the word) such things.

amateur approach

The video is presented by the channel " Workshop of Sergey Kudravets". In it, Sergey talks in detail about how to make a reliable and simple bench out of unedged pine boards. The above list of building material and tools is just made according to this video.

Professional approach

An amazing video instruction in which the author shows the entire process of making a wooden bench. The channel is called The adventures of the pieces of wood”, the author very pleasantly shares information with the audience, and the work process itself is simply mesmerizing. I personally watched it just for the sake of self-development. I was very impressed with how aesthetically everything is cut, folded and fastened.

Every day it is getting warmer and warmer, which means that very soon the holiday season. And why do you need a cottage? Someone to grow vegetables, fruits, herbs. Some people like to barbecue. I want to show and tell you about how to make a table and a bench for a gazebo with your own hands. There are a lot of ideas, so get ready.

Let's start from a durable option - a bench and a table made of wooden decks. The material is not particularly pliable, quite heavy and expensive. But very durable too.

The design is extremely simple. But it requires special tools(circular saw, etc.). Usually, after the construction of a bathhouse, etc. decks remain. It is for such cases that this is the best option.

If a special material no, you can make such a table. Interesting structure, antique. In general, we love :)

Also, it is worth paying attention to at least interesting option, albeit more expensive. Big table and many small benches and chairs.

Sometimes there are bench chairs that are built into the gazebo itself.

As well as more presentable chairs that can be placed not only in the gazebo, but also in the house.

In general, everyone decides for himself what to choose, what bench and table to make. It's a matter of taste. That's all, drop your options in the comments.

Benches and benches in the country and in the garden are primarily a place of rest. But just putting up a bench is not interesting. After all, you can create beautiful corner. In order not just to relax, but to enjoy nature and the fruits of your labor. There are many interesting ideas. And often the most simple designs such that these benches with their own hands can be made by any person whose arms grow from their shoulders.

Photo of original benches (ideas for summer cottages and gardens)

Everyone knows what ordinary benches look like - they have seen it more than once. But the usual - the simplest - something does not want to. Especially if you have already begun the process of decorating the site or are just planning. Why not start from the bench? And there and other decorations will catch up. It's worth just getting started.

In the garden or near the house, I want to have more greenery: beautiful and different flowers. - that's good, but why not combine them with a bench.

What could be easier? Two wooden boxes in which flowers are planted and between them a pair of planed and polished boards. You can put this bench near the wall, and fill a couple of long boards on the wall - there will be a back.

Not everyone likes flower beds made of wood: wood requires care, and without it it quickly loses appearance. It is especially difficult to care for a tree that comes into contact with the soil. Instead of wooden boxes can be, for example, stone or concrete pedestals.

It is very easy to make such a bench in the country with your own hands. You can find ready-made concrete flower beds or do something similar. You can buy a board processed, or you can do it yourself. Instead of a board, there may be half a log - depending on the style in which the site is made out. Fastening the seat is easier with metal corner. It is attached to concrete with dowels, to wood - with self-tapping screws from below or through bolts.

If someone has large plants in durable flowerpots, you can implement next idea. In this embodiment, the bench covers the plants. To avoid surprises, flowerpots must be very durable ....

There is a similar version of a bench made of boards and without plants: it may need to be placed on or in. The supports are made up of boards of the same size, and the seat is made of timber.

Bench made of boards - a non-standard option

And more variations on the same theme: hollow building blocks. Processed bars are inserted into the holes. This is the bench seat. Just round the edges of the beam, or it will be uncomfortable to sit.

For this garden bench, it is desirable to find large blocks with thick walls. If not, you need to securely fasten the blocks one to the other. The whole task is to fix the blocks first (for example, with studs), and then to them - the bars (with bolts or dowels).

Log benches

If your site is decorated in a rustic or ethno style, the standard approach will not work for you. It is best to use logs in this case - with or without bark - this is your choice.

Seat for a bench made of logs - sawn along the trunk of a large or medium diameter. The back is either a smaller diameter trunk, or just a cut closer to the edge. The legs can also be made from narrow pieces of logs (see the photo below).

Log bench - quick and easy

The legs and seats are interconnected with metal pins: a hole of a slightly smaller diameter is drilled under the pin in both parts. The pin is hammered into one of them, the second part is planted and also hammered, but they are not hitting the pin, but the wood. So that there are no traces, a piece is laid unnecessary board and they knock on it with a hammer (or sledgehammer). Such a connection should be quite reliable, but to be sure, you can install two or three pins, or you can chop off a little log, making a flat area on the same size on both connected parts. By increasing the area of support, increase the reliability of the seat fastening: after all, the log weighs a lot.

Bench option without back

Another interesting option in the style of "ethno" is presented in the photo above. It is implemented in stone, but you can also make this bench from a log. The seat is a very thick board, the legs are a large part of the deck large diameter. A groove is cut in the deck for laying the seat. If you have a tool (you can make a cutout with an ax, a grinder or a chainsaw), it's easy to do.

Often in the country you need a desktop. From a log you can make not only a bench, but also a table. A variant of such an ensemble is in the photo. Only the tabletop is made of boards, all other details are logs different diameters or half.

A greater degree of processing is inherent in the next bench in the same style. The back, legs, armrests are made of thick and not very thick branches, the seat is made of sanded and processed (peeled and sanded) unedged boards.

Another bench is almost also made. Only boards and branches are located in a different direction and a different view is obtained. A do-it-yourself bench of this type does not require much skill. AT this case The more careless the work is, the more decorative the result.

Wicker back - you will meet infrequently

Around the tree, you can make a platform for relaxation and a bench. The designs are simple, making the flooring is generally simple.

You can add a rest group and. And you can put it above the bench - this is the “ancestor” regular arch- one of the types of light gazebos. And so that relaxation is completely complete, you can do, or.

From metal and wood

Few people will put completely in their country house metal benches. Of course, they can be very beautiful, but in the summer they heat up to incredible temperatures, and when it gets a little cold, you can’t sit on them, because they are too cold. Benches made of metal and wood are deprived of these shortcomings. Legs and load-bearing structure are made of metal, and the seat and back (if any) are made of wood. Moreover, there are also interesting benches in modern design.

Rectangles are welded from the profile, jumpers are welded to the side walls, on which the seat boards rest. Simple, stylish, reliable, functional.

In a more advanced form - with armrests, backrest, soft cushions on the seat, this design may look like in the photo. The wide seat turns the bench into a sofa, and cushions add comfort - fabric-covered furniture foam rubber. The tables are made in the same style - a frame made of corrugated pipe and a tabletop made of boards.

One important point: if you are making a seat or tabletop from several adjacent elements, they do not need to be joined back to back. There should be a gap of 3-4 mm between adjacent boards / bars. Wood swells and shrinks. In order for the surface to remain relatively flat during these processes, a gap is needed.

If smoother lines are needed - for families with children - you can bend the pipes and make garden benches and a table with rounded edges. This garden furniture is completely safe. An ordinary round or professional pipe is bent, leaving on the sides in the shape of the letter "P" with wide back. The length of this back is the length of the bench. For the table, the dimensions are made a little larger: the legs and the back are longer.

Make two identical blanks on the table and bench. Next, cut the boards of the same length. For a seat about 40 cm, for a tabletop at least 55 cm. Attached to pipes furniture bolts with a flat hat. To prevent the caps from sticking out, a hole of a slightly larger diameter is drilled under them.

Board benches

The largest group is benches and benches made of boards. There are designs that are more reminiscent of sofas, especially if you lay them on soft pillows- and you can lie down.

garden furniture in modern style easy to assemble: rectangles with partitions made of thinner boards, interconnected.

Even the usual design of a country bench can become exclusive if you approach it with imagination: wooden wheels are used instead of legs and armrests. It turned out to be a designer thing.

A bench made of boards with a back and wheels instead of sides - looks interesting

And the simplest possible one is a board with legs in the form of the letter “X”. Such shops were built centuries ago, you can see them today.

From the boards you can make a bench in a modern style: in the form of the letter "P". With such a design the main task- ensure rigid fixation of the legs and the seat: the bursting forces are not compensated by anything. In this case, it is important to take a thick board or timber so that it does not sag. You can put the board "on edge": so the rigidity will be greater. To increase reliability, you can install corners from below.

The photo shows a 45° cut. Having a miter box or circular saw Precise cuts are easy to achieve. By precisely docking the workpieces and fastening them, we get an angle of 90 °. If the seat does not bend, it will serve for a long time ...

An interesting and reliable version of the bench is shown in the photo below. The legs are assembled from boards of different lengths: every second one is shorter by the width of the board for the seat. Interesting idea. It is easy to make such a bench: it is important to maintain the dimensions, and everything is connected very simply: with nails into the face of the seat.

original benches

Here, it seems, what else you can think of .. but it turns out, a lot. For example, attach the seat to a large stone.

Make a structure out of bamboo trunks.

Or stone.

Sitting in winter will be unpleasant, but beautiful ...

How to make a bench: photo reports

We will not make benches from stone - not everyone has the equipment, but from different pieces of wood - we can. Let's talk about the manufacture of simple, but unusual designs. So that a bench made with your own hands is a source of pride.

Bench without back

The design is simple, but it looks interesting due to the specific material. For the legs, a bar with rounded edges is used. If you have logs small size, you can trim them on the sides. You get almost the same effect. Such material is not so rare, the legs are unusually assembled from it: the bars are laid one on top of the other flat. This adds zest and adds appeal.

This bench without a back has a length of about 120 cm, a width of about 45 cm, a height of 38 cm. You can round the edges of the beam with a cutter, or you can find a similar profiled one. It costs more, but it will be easier to work with it: it is already well processed and connects simply.

Depending on the found section of the beam, calculate the length that you need. Determine how many bars will have to be stacked one on top of the other to get the height you need. In this case, it took 5 bars per leg. Total 45 cm * 5 pcs - 2.25 m. It took 4.5 m of timber for two legs. A board 40 mm thick and 90 mm wide was used on the seat. For the seat you need 5 boards 1.5 meters long. It turned out 1.2 m * 5 pcs = 6 m.

First, we cut and process the boards for the seat. Their edges must be rounded. If not grinder or a milling cutter, you will have to work with sandpaper, but you can find such a board or arrange at a sawmill to have it processed and polished for you: there will be much less work. So, we cut the boards of the same length, grind and varnish (with or without tinting - your choice).

Fold the leg bars one near one, aligning their edges. Using a square and a pencil, draw lines where the fasteners will be placed. The distance between the lines is 7-10 cm.

You can take metal pins, or you can make dowels - carved from wood. Holes are drilled under them slightly smaller than the diameter, the depth of the hole is half the length of the pin. Then they are hammered into one part, a second part is pushed into the same hole from above. The connection is reliable, but to be sure, you can add glue, although then the design will turn out to be one-piece.

With a pin connection, the main task is to make holes strictly one above the other, so that the parts mounted on the pin give a smooth edge. We did part of the work - we drew lines where we will drill, now we need to measure the same distance from the edge. Let's create a template for this. We take a piece of plank with a width of about 1.5 cm. At this distance from the edge of the bars, we will drill holes. Having applied it exactly along the edge, we mark the intersections with the applied perpendicular lines.

We will install the pins in a checkerboard pattern, so we will drill holes through one intersection. Also, holes on one bar with different parties do it in a checkerboard pattern. In a similar way - on the pins - the legs are connected to the seat: two pins for each bar.

Technologically, this type of connection is correct, but it is complex and requires a certain skill. You can do it easier. Fold all the bars one on top of the other, secure with clamps, drill through in two or three sets - in the center and along the edges, connect with a long hairpin, with washers placed under the cap and nut. To the legs of the seat strip assembled in this way, you can nail it on top or try to make a pin connection.

The bench is made by hand. Remaining finishing work

If you nailed the seat, use some wood putty. suitable color, add some very fine sawdust and stir. Coat the joints with this composition. When dry, smooth with sandpaper. Sand all parts to a smooth finish and coat with lacquer or wood paints for outdoor use (preferably not covering, but which leave the grain of the wood visible).

How and with what you can paint wood read. It refers to lining, but painting techniques remain the same, and the compositions must be taken for outdoor use.

DIY bench from broken chairs

In any household you can find two old chairs. They should be the same and still strong enough. We disassemble the chairs, leaving the part with the back and legs. We connect the two backs with the help of bars of a suitable section.

For greater rigidity below, at a distance of about 20 cm from the floor, where the chairs used to have lintels, we make another frame with transverse bars. It can be used as a footrest or for storage of any things.

After grinding, we paint the resulting structure. This time the paint should be normal: different breeds wood can only be painted over with covering paints. Apply with a brush or spray bottle.

The point is small: cut the seat out of thick plywood (thickness 8-10 mm) and cover it with foam rubber and fabric.

Pallet garden chair/bench

Everything is useful in the economy. Even from cargo pallets you can make garden furniture. Moreover, there is no need to disassemble them: we use one for the seat, we will make the back from the second. All you need is well-crafted planks for the armrests and bars for the legs.

In one of the pallets, we strengthen the attachment points by inserting pieces of bars. After inserting, we fasten it with self-tapping screws on one side and on the other.

From a bar with a cross section of at least 100 * 100 mm, we cut four identical segments 80 cm long. We fasten them in those places that have just been reinforced. We leave 20-25 cm on the legs. We fasten with four long self-tapping screws - 150 mm and not shorter.

It is important to maintain verticality and leave the same distance on the legs. Then the seat will stand straight. If there are errors in height, you can try to file, but then you will have to cut from above - so that the armrests are even. So try to screw it straight. Deviations from the vertical can be dealt with only by screwing the leg again.

We attach a second pallet to the rear racks, and on the sides - planks for the armrests.

It remains to cut a piece of furniture foam rubber and cover it with a cloth. You can make pillows for the back. If you are not going to process everything thoroughly, but to make a loft-style chair, go over with sandpaper or a grinder, treating all surfaces to smoothness. You can cover with paint, giving the wood a dark color.