Do-it-yourself children's slide drawings. We make children's slides with our own hands. A set of necessary tools

Slides, like swings, are one of the most popular entertainment for children on fresh air. Any playground is equipped with a slide.

AT recent times some parents are afraid to send their children to the playground themselves, especially during rush hour. By itself, the slide is almost not dangerous and is equipped with a number of protective equipment. But the public slide itself carries a danger in the form of other children.

Imagine what will happen if several children climb a sufficiently high hill and decide to fly off the hill with a caterpillar? Often such experiments end in failure. Therefore, now some parents, at every opportunity, limit their children from such dangers and build similar slides in their yard, in the garden, and even in the garden.

The matter remains small - to design and build such a slide.

Types of slides for children and the age of the child

For starters, you need to decide on view of the slide. There are a huge number of them: small, medium, very large, plastic, metal, double, with a whole range of additional features.

Often found in playgrounds slides of metal. This design is easy to mass production and durable. Convenient to use large quantity children.

But regarding security such a slide has a number of disadvantages:

The height and sharp angle of the slope make the metal slide dangerous for very young children.
In the sun, a metal slope can heat up to very high temperatures.

In a relationship perfect combination slide size, relative safety and convenience the best option counts wooden slide. She can be like standard view, and with various additions in its design.

There are double-sided slides with space for a rope and rope ladders. Such slides attract the attention of children much more.

And in hot summer time children will love to play inflatable slide. The slope of such a slide ends directly in a pool of water. Children from three years of age can use this slide under the supervision of adults. The pool is not recommended to fill deep, especially if your child cannot swim.

What material to choose?

For the smallest children, slides are made from plastic. This design is a low ladder (usually not higher than a meter) and a plastic ramp, which has the lowest possible angle of inclination for safe use children.

But to make such a slide on your own is impractical. Better buy finished product, given that the market can be found as the most budget options, and more expensive.

The best material for self-made slides is wood. The tree is flexible in terms of creating the most various designs, not expensive and ecological.

Create metal carcass slides is a tricky business. Additional equipment, materials, skills are required. Therefore, those parents who want to pamper their children opt for a tree.

Some masters successfully combine a slide from wooden base and a metal or plastic ramp of a suitable size.

It can be purchased at hardware store, or order from the factory.

Do we make a slide out of wood?

Consider wooden model slides for children 3-8 years old with a metal ramp.

We will need:

12 bars for the base;
several boards for flooring the top of the slide;
flat board for the ramp pallet;
metal or plastic slope;
2 boards for the railing of the slope;
boards for stairs;
nails;
plywood.

First you need to build base for slide. The design of our base will be the simplest, but at the same time quite stable. It will be a rectangle one and a half meters high and a meter wide. To build such a rectangle, we need 4 one and a half meter beams and 8 meters.
We will find it in the garden or on any other site where we plan to install a slide, free place. Let's start base assembly. Of the four meter bars assemble the square, firmly hammer it together with nails.
Now take one and a half meter bars and fix them perpendicular to the resulting square in the corners. Complete the base using the last four pieces for the roof of the rectangle. Base top board for extra stability and security.
Cut the appropriate size squares of plywood and nail them to the sides and top of the base. If desired, the resulting walls can be painted.
The next step is attaching the slope to the base. First, set the ramp railing at an appropriate angle so that the child does not fly to the ground during the game. The resulting bumpers must be at least 15 centimeters. Under the railing, attach the base - a flat board.
Now install directly by yourself slope. The fixing process is very simple. With a special stapler for metal, attach the ramp to wooden pallet, pressing it firmly and spreading it evenly.
Then you can start building stairs. Decide on the height of the child who will use this slide. Based on this, you can determine the most suitable distance between the steps of the stairs and the height of the railing.
Choose a convenient stair angle. The smaller the angle of inclination, the easier it will be for the child to climb the hill.

The last part of the construction of the children's slide is installing railings on stairs and top. They should be high enough so that the child feels safe and does not panic at the top of the slide. The wood intended for the railing must first be sanded so that there are no knots and hitches.

Drawing of a simple wooden slide

When building, keep in mind that it is better to make a slide “for growth” so that it lasts a long time.

On video detailed wizard Class:

Do not doubt the decision to build a slide. This is quite a feasible task for most parents. Such a slide can be many times safer for your child. You will take into account all the nuances, combine security aspects and find a compromise that allows you not to worry about how your child spends his leisure time in the future.

Or he simply does not have a slide near his house with which children could ride.

The slide can be not only fun entertainment for kids, but also for children in their teens.

Everyone loves to go down fun, laugh and run a race, moving down a fun slide.

Parents who made slides with their own hands can be pleased with themselves, because your children will definitely thank you. And their laughter good mood will not leave anyone indifferent.

We make a children's slide with our own hands

Alas, plastic parts slides for children are not yet sold in stores, and it is not possible to produce them independently, outside the factory conditions. Therefore, we stock up on wood. You will need:

wooden boards 2200x150x20 in the amount of 5 pieces;
do-it-yourself beam for a children's slide 450x100x50 in the amount of 5 pieces;
timber 700x100x50 in the amount of 2 pcs.

We need three boards to build the basis for the descent of the children's slide.

To make it as convenient, comfortable and safe for kids to ride, they should be polished almost perfectly. It is also important to make these three boards of the same thickness.

To make the slide for children or to be as smooth as possible, you will need an ordinary grinder with grinding wheels.

Boards to the bars should be fixed on top of the slide with your own hands so that they do not bend during operation. In order for them to be attached to the bars, holes should be made in accordance with the chosen fastening method.

The tree must be smeared with a special putty, which clogs all the extra holes. To certainly protect yourself from irregularities, you can process the surface of a children's slide, made with your own hands a second time with a grinder, and then cover it again with putty.

It is important to buy wood putty. When you apply the mixture, you must wait until it is completely dry, only then continue to work.

How to make a side slide for children with your own hands

Now we need to prepare the side parts of the future slide. To do this, we process the tree in a similar way using grinding tool, and then we install the sidewalls and attach the base of the children's slide to them, which will serve as the starting point for the descent along the slide itself.

The slope of the slide for children is usually about 55 degrees.

The side parts must be attached to the bars, as well as to the base of the slide using self-tapping screws.

In addition to what we attach at the second stage of the sidewall, we still need to make the sides for the slide.

Any requires the presence of sides different swings and slides, because it is better for children to go down, and for the sake of safety, this should be taken into account. Firstly, it is convenient with the sides, and secondly, the child can fall in the middle of the track.

The sides need to be properly sanded, and then coated with an antiseptic.

Any wooden detail for a children's slide that you make with your own hands, you need to process antiseptic since rain, snow and others precipitation can ruin the quality of the tree.

In addition, insects do not sleep and also pose a danger to the life and reliability of your slide.

To clearly understand how to make a slide with your own hands, you can draw a diagram on which all the details, sizes, scale and angle of inclination of various parts will be marked.

We fix everything with self-tapping screws, and in some places with long nails. So that the nails do not hurt anyone, they must be driven deep into the tree.

You also have to make a do-it-yourself children's slide, which can be in the form of steps.

Handrails are nailed to the steps, with the help of which kids of almost any age can climb the hill.

It is advisable to grind all the details several times so that no one gets hurt.

How to make and install a children's slide with your own hands

After the slide for children is ready, you need to cover it with paint in several layers:

we apply the toner on the hill with our own hands (stain);
apply yacht varnish (when the stain dries).

Yacht varnish is also called super gloss, because it shines very well, and it will be more convenient to move on it than just from a wooden varnished surface.

In principle, in terms of functionality, this coating is not inferior to ordinary metal slides.

After the last coat has dried, sand again and then apply last layer coatings.

What is important to remember when installing a children's slide that you made with your own hands:

slide supports are buried to a depth of 60 cm;
the supports of the slide for children are dug in and laid with bricks - this will serve as a kind of fortification.

Of course, the pit can be filled with concrete in order to plant a hill tightly, but the first option, which is the easiest to translate into reality without extra costs.

In addition to the fact that you can make a swing, a slide, horizontal bars, there is an option to create one that will be used in the summer.

AT this case Whatever your idea, it is important to consider the presence of an antiseptic that covers the tree to prevent moisture and decay. However, it is the tree that serves as the main material for the equipment of a makeshift playground, therefore Sander you will still need it.

Please your and neighbor's children, do not be lazy and make a slide for children!

Parents who have small children often have to visit playgrounds so that the child swings, plays in the sandbox, and rides down the hill. But adults do not always have enough time for such events, especially if the site is far away. Having your own plot, you can make such entertainment for a child at home. This will solve many problems of parents, and the child will always play under supervision. Today we will talk about how to make a children's slide with your own hands from improvised materials.

A metal slide is a common building from Soviet times. It was installed on the playground along with the sandbox. Metal is the strongest and durable material. But under the influence of external negative factors, it undergoes corrosion, so it is better to use stainless steel or galvanized metal for the manufacture of slides. At self-manufacturing slides at home must have a drawing at hand.

From materials and tools you will need:

metal pipes with a diameter of 15-25 mm, rods;
corners with a section of 50x50 mm, 20x20 mm;
sheet iron with galvanized coating;
multi-colored paints, cement, crushed stone;
welding machine, Grinder, crowbar, hammer.

Having prepared necessary materials, at the site of the future installation, proceed to the manufacture of the structure according to the drawing:

Start manufacturing with a frame. For top platform from the corner, weld a square measuring 1.5 x 1.5 m. Place stiffeners crosswise inside it. Weld on top of the square to the corners a metal sheet not less than 1 mm thick of the same size. If possible, use corrugated iron, it will give stability, and the child will not slip on the playground.
Weld the finished platform to the racks. For their manufacture, you need a pipe with a diameter of 25 mm and a length of 3 m. To the ends of the racks, the lower part of which will be concreted, weld the heels from any metal scraps.
Under the welded frame, mark and dig 4 holes about 1 m deep with a drill. Tamp the bottom with small stones or rubble. Lower the frame racks into the pits, aligning the structure with a plumb line. Knead cement mortar with rubble and fill in the holes. After about a week, the solution will completely harden and you can continue building.
From a 20 mm pipe for stability, cross-weld the frame strapping between the uprights. From the edge of the platform down to the ground at an angle of 45 °, weld a descent from 2 corners with a section of 50x50 mm parallel to each other. Across the corners, weld strips for steps from corners with a section of 20x20 mm at a distance of 20 cm from each other. Sew up the plane of the steps wooden planks or corrugated iron.
On both sides of the stepped descent, weld handrails from 15 mm pipe. Sew up the openings between the handrails and the descent metal mesh or thin rods.
The chute is made from 2 pipes with a diameter of 20 mm. Bend the lower part of the pipes with a pipe bender or by heating with a cutter. You should get a design from a steep descent, smoothly turning into horizontal plane. top weld gutters to the other edge of the site. Fix stiffeners between the pipes of the gutter. From above, weld galvanized sheet metal with a thickness of at least 1 mm. If it is not possible to make a descent from solid galvanization, then weld smaller sheets with an overlap along the descent.
Curve the sides of the gutter fence from a 15 mm pipe. They need to be welded parallel to the bottom at a height of 30 cm, and the sides are sewn up with galvanized sheet metal. In several places, weld supports for the gutter from any remnants of the pipes.
The metal structure is ready. It remains to process it with a grinder to eliminate all sharp protrusions. The design can be decorated with multi-colored paints to make it attractive to the child. The bottom of the descent does not need to be painted, otherwise the coating will reduce slip.

Wood slide

Wooden slides at home are easier to make on your own; welding is not required here. Wooden structures are less durable than metal ones, but a beautiful playground with a sandbox, a house, rope ladders and other equipment can be made from wood. For DIY construction, it is better to use wood conifers. From materials and tools you will need:

4 beams with a section of 100 x 100 mm, a bar with a section of 50 x 50 mm, edged board section 25 x 150 mm;
galvanized iron 1 mm thick or linoleum;
self-tapping screws, nails, antiseptic, varnish or multi-colored paints;
cement, crushed stone;
electric planer, grinder, screwdriver, hammer, sandpaper.

Work, as always, start with drawing up a design drawing. Decide whether there will be a slide with or without a house, and draw a diagram of it. This will make it possible to calculate the consumption of material, as well as facilitate further construction.

Everything is ready, you can start carpentry work:

From the remnants of the material, make wooden benches or a sandbox near the slide. They will decorate the playground, bringing joy to children.

Plastic slides

Do it yourself plastic construction will not succeed, it is only bought in the store. Such slides are produced in one piece and collapsible. The owner can only install a slide on the site. Collapsible models are better suited for giving. They are easy to disassemble for storage. winter period. This will prevent theft and vandalism at a time when the cottages are left unattended by the owners.

AT plastic models use different gutters, which is very popular with children. They are screw, tubular, straight and other shapes. If the child still wants an unusual descent, and the parents do not have enough money to buy, you can do it for a summer residence or at home combined option slides. The fact is that the gutters are sold separately. They are also made in any shape to order. You will only have to make metal or wooden frame and attach a plastic trigger to it.

A playground built independently for a summer residence or at home will decorate the yard, provide children with entertainment in the summer.

In contact with

Children have always loved and love to ride on carousels, swings. Now these children's structures are made in industrial scale. They can be purchased in many outlets. But some of them can be built and on your own. In this article we will look at how to make a children's slide.

Building Requirements

Territory country house is great place for the installation of a children's slide. Making it for children is not very difficult if you follow certain rules:

The age of the children does not at all affect the fact that the design must include such mandatory elements as fences and railings. During the game, the child becomes inattentive and may fall from a height, and these elements will help him maintain balance.
For the construction of the building, you need to use only environmentally friendly clean materials which will be harmless to children's health. It is forbidden to use structural elements which are highly flammable.
When building a children's slide for a summer residence, it is preferable wooden materials. Metal constructions in general, they are no worse than wooden ones, but they have some drawbacks. We must not forget that for children the most active time of the year is summer with burning sunbeams. So that children do not get burned on a very hot metal, a structure made of this material will have to be placed in a shaded area. A wooden structure can be placed in any convenient location. There are also plastic slides, but their material is not very durable and can crack at any time. In addition, such designs are widely represented in stores, so it makes no sense to make them yourself.

The slide must be designed in such a way that it is primarily safe for children. There should be no slotted partitions and dangerous gaps in the children's structure, since children in the heat of the game can stick any part of the body into the existing hole and get seriously injured during the descent. All details must be calculated to the smallest detail, otherwise unforeseen troubles may happen.

Manufacturing process

To build a children's slide, the first step is to build a descent. It is made from several boards, which should be the same in width and length. wooden base must be carefully polished so that children can descend comfortably and safely. The boards are connected to each other with several bars with bottom side.
After the descent is built, it is the turn of attaching the side structural parts to it. In the course of work, it is necessary to determine the height of the structure that the children will climb and the angle of inclination of the exit. Slides of factory production have standard sizes: 1.3 m - height, 55º - angle of inclination. These parameters must be followed during construction. homemade design. The side boards should be of such length that their ends go up to the platform and serve as a kind of handrail for grabbing before descending. Side boards are attached on both sides to the base of the descent using self-tapping screws. The sides, as well as the descent, must be well sanded, sharp corners cut and smoothed sandpaper or grinding wheel grinders. These safety measures will prevent children from being injured while playing.
After the descent is ready, they make markings for a children's structure. drill for garden work holes are made in the ground, into which bars are installed, the ends of which are coated with mastic on the underside. It will not allow the tree to quickly rot. After that, the installation site of the bars is poured with concrete.
In the upper part of the beams, with the help of a saw, grooves are cut of such a depth and width that the strapping strips can be inserted into the racks without any problems. These wooden elements connected to the bars with self-tapping screws. Strapping straps will perform 2 functions at the same time. Firstly, they will make the design of the children's slide more rigid and stable. Secondly, they will play the role of a protective fence. At the same time, children will feel safe on the playground.
2 more wooden beams are attached to the resulting frame structure. A ladder will be attached to them on one side, and a ready-made descent on the other. Then it's the turn of the device wooden floor, which is constructed from boards using self-tapping screws. Small gaps are left between the floor boards so that water can escape through them during and after precipitation. For greater bond strength wooden structures fastened with metal corners.

The children's slide has been made, and now the children will be able to enjoy their free time with pleasure.

Do you think children's play is unsafe? Are you afraid that your child might get hurt while looking for adventure? The best way out of the situation is not to prohibit, but to provide safe place for games! Moreover, making a children's slide with your own hands is not so difficult. To do this, you need a minimum of material, construction tool and a little imagination. BUT practical tips on construction, structural drawings and recommendations regarding the choice of building materials can be found below.

What you need to know to build a children's slide

The proverb about the need to measure several times before cutting off is especially relevant when building a play complex for a child. After all, mistakes in this matter are unforgivable!

Playground slide with swings

Five golden rules for the game slide

First of all, a children's slide should be safe and comfortable:

The descent must necessarily have a “brake platform” - a section where the slope is parallel to the surface of the site. Otherwise, the descent speed will not decrease, which may cause injury to the child.
The length of a do-it-yourself children's slide should be exactly twice as long as the height of the structure. So, if the length of the slope is 5 m, the height of the launch pad cannot be more than 2.5 m.
Within a radius of 1 m near the descent zone there should not be any buildings or fences. This is necessary so that the child cannot hit, having accelerated strongly.
It is necessary to provide a special coating in the descent area (sand, rubber mats, etc.). In rainy weather there should not be a swamp!
If a sandbox or a hammock is placed under the structure, you need to sew up the “ceiling” in advance and make a roof over the launch pad (to drain water). Otherwise, sand from children's legs will fall on the heads of those who are located below.

How to choose material for a ramp

The choice of materials for covering the descent is not so great. And, given the requirements that ensure the safety of the child, it is completely narrowed down to several options. But, before listing the features of these materials, let's figure out what it is impossible to make a children's slide from with your own hands:

Polycarbonate (especially cellular). This material, firstly, does not slide well, and secondly, when broken, it forms dangerous chips. In addition, in the summer, polycarbonate expands, forming waves. Therefore, the slide in hot weather will quickly fall into disrepair.
PVC panels. A very fragile material that is not able to endure harsh winters.
Glass mats. Categorically not recommended for contact with the skin of a child.

Winter slide from monolithic polycarbonate

How to achieve a "mirror" wood surface

Building a wooden children's slide with your own hands is a reality! But only if you are willing to set aside a few days to make a slippery wooden ramp. Indeed, in order to apply several layers of yacht varnish and sand the surface in between applications, it will take a lot of time.

What is attractive wooden slide

Advantages of a wooden slide:

The child will be surrounded by environmentally friendly, natural materials.
The surface will not heat up as much in the heat as, for example, metal.
In winter, a wooden slope can be filled with water and turned into an ice slide.

Disadvantages of a ramp made of wood:

If there is sand on the site, then the varnished surface will become unusable very quickly. Children will bring sand on their clothes and scratch the stingray with it like sandpaper. So be prepared to renew your coverage every year!
The slightest oversight while grinding the surface - and the baby is provided with splinters and scratches after riding.
Sliding speed by wooden surface in any case, it will be low, which will quickly make the wooden slide uninteresting for growing children.
In the summer, it will not be possible to convert the slide into a water park, that is, to supply water to the slope.

A selection of drawings of a children's slide made of wood for DIY:

A simple drawing of a wooden slide

Low slope for small children

Game complex with a slide

simple model

Advice! Instead of wood, it is better to use Finnish plywood to cover the slope of the slide. It is much more moisture resistant and perfectly tolerates the effects of precipitation.

Secrets of the slippery surface

A few secrets on how to make a children's slide made of wood really slippery:

Wooden descent (dry and sanded) can be coated with a special oil that protects the surface (for example, "Pinotex"). This must be done in several layers. Thanks to this procedure, the tree will not lose its smoothness, and moisture will roll off well without destroying the surface.
Layer-by-layer sanding of wood after each application of varnish will help to achieve the effect. mirror surface and make the slide really slippery.
Plywood slope can be covered liquid acrylic used for bathroom refurbishment. In addition to excellent glide, this option is also good because you can choose almost any color of the coating! But it should be remembered that scratches form quite quickly on it, into which dirt will invariably accumulate. This will not affect the functionality of the slide, but appearance designs will be damaged.

Escape from polished wood

Advice! The joint of plywood sheets looks much more aesthetically pleasing if their edges are sawn off with a jigsaw at an angle of 45º. In this embodiment, the sheets are arranged as if overlapping, and one element “creeps” onto the other.

Metal coating - we take care of the safety of the baby

A ramp made of stainless steel or galvanized sheet is a “classic of the genre” during the construction of a do-it-yourself children's slide. But this solution also has its drawbacks.

Firstly, in order to cover the entire slide, you must either overlap or spend money on a much more expensive sheet of metal bigger size(sheets are available in lengths of 2.5 and 6 m). There is a third option - to allocate time for the search construction company, which agrees to "cut off" the necessary piece of stainless steel from the existing roll.
Secondly, stainless steel (like other metals) gets very hot in the sun. Therefore, it is recommended to place the ramp on the north side in order to reduce the intensity of lighting of the structure. But such a layout is not always possible on the site!
Thirdly, thin steel is very sharp and completely unsafe for a child. An inaccurately bent corner can cause serious injury to the baby! Therefore, it is necessary to bend the sheet very carefully, firmly fixing it to the base shield.

Metal slide with handrails

Advice! Instead of a galvanized sheet to cover the slide, you can take an alucobond (aluminum panel) and attach it to liquid nails. The advantage of this solution is color palette material!

Secrets of a good metal slide:

The shield under the stainless steel sheet should be perfectly flat, without protrusions and drops. After all, stainless steel is extremely thin and does not compensate for surface flaws. For this, it is better to pre-sheathe the boards of the structure with fiberboard boards.
It is not recommended to buy mirrored stainless steel, as it heats up much faster and more strongly on sunny days. Much more best option- polished stainless steel.
The sheet should be much wider and longer than the slide itself. Indeed, for the safety of the child, this coating around the entire perimeter must be bent and hidden under a kind of baseboard or board.

Advice! It is necessary to fasten a sheet of metal only along the edges (to the sides and bottom). It is absolutely impossible to make fasteners on the surface of the slope of the slide!

Slide from flooring - cheap and cheerful

Another interesting and inexpensive option- covering the slide with a sheet of linoleum. The advantages of this solution are obvious:

the material is relatively cheap (you can buy scraps that are sold at half price);
under linoleum is not needed ideally Smooth surface due to its thickness and softness;
the base does not rot under this material, it protects the tree from moisture and temperature changes (if the linoleum is on the sides, in the summer the slide can be made water);
linoleum softens impacts and does not form dangerous sharp corners, chips or splinters, as other coating options.

Linoleum slide suitable for home

But such a slide has enough disadvantages:

the coating must be changed annually due to its rapid wear;
in very hot weather, linoleum can melt, which is dangerous in terms of getting burned;
the sliding speed on this material is quite low;
the design with linoleum does not look very aesthetically pleasing.

For optimal glide, you can provide felt or felt mats for skating.

We build a wooden slide for a child - step by step instructions

The dream of every child is a multifunctional playground with which you can realize any ideas for games. So, step-by-step instruction to build a children's slide with their own hands.

Competent preparation is the key to successful construction

Preparatory stage:

Take off fertile soil at the construction site and level the ground. Fill the site with sand and let it settle, compact (it is advisable to complete this stage in the fall, and start building the slide in the spring).
Prepare wooden blanks (kosour, railings, boards for steps and "tunnel", timber for the base): if necessary, dry everything, saw it to the selected dimensions and carefully sand it, and then impregnate it with a protective mixture.
Paint steps, handrails and boards for the “tunnel” with multi-colored enamel in 2 layers with intermediate sanding.
From the 12th plywood, cut out the side elements (for lining the tunnel) and the sides of the slide. Treat the elements with impregnation.

Technique for mounting the base of the structure

Frame installation:

Build a foundation. To do this, it is necessary to make holes with a garden drill, install reinforcement in them according to the level and fill everything with concrete.
Weld the corners to the reinforcement. In the pillars for the base of the slide, make cuts and mount the timber on the corners, securing everything with self-tapping screws. Connect the poles to each other with braces.
Make a ladder: fix stringers (preferably added on the back side of the board for additional rigidity of the structure), fill steps on them.
Mount the launch pad to which the ladder leads.
Next, make a base for the descent from a bar and install a curved metal profile (25x40) for the ramp.

Bearing structures

The final stage - we finish the construction

Do-it-yourself ramp and sheathing for a playground for a playground:

Lay a plywood shield on the base for the slope and make a galvanized iron flooring. Bend around the perimeter of the sheet and attach from below to metal profile. In the boards that form the platform, cut a gap and also wrap the iron flooring there.
Under the slope, make a tunnel from the boards. Sew up the sides with plywood.
Install the sides on the slide and the railing on the stairs.
Mount hipped roof and cover it with pre-treated plywood.
Sew up the side parts of the structure with plywood sheets and cut holes in them for a climbing slide.

Organization of the slope and sheathing of the slide

Creative slides - we make the dreams of a child come true

Children's imagination is strong and sometimes incomprehensible. In the imagination of a child, even the simplest hut can easily turn into a beautiful castle! Therefore, for fun, a simple descent with a ladder will be enough for kids. However, there are a lot of options on how to make a children's slide with your own hands in an extraordinary way and with fiction - examples in the photo.

Downhill Treehouse

Protected by a stone lion

Advice! In order to keep interest in the slide for a long time, it is desirable to provide additional entertainment elements on the launch pad.

Playground- the dream of every child aged 3 to 13 years. And in order for the play area to meet the changing needs of children, you need to think through all the details at the planning stage. For this, you may need to invite a specialist who will save you from having to make a children's slide with your own hands. And then a real gaming complex will appear on your site - safe and comfortable.