Install a fence made of welded galvanized mesh. How to make a sectional metal fence from a welded mesh. With polymer, PVC coating

The fence performs not only the function of protecting property from the penetration of outsiders, but also an aesthetic, decorative function, being an ornament land plot. While earlier stones, bricks, wood were used for fencing, modern welded metal meshes allow you to quickly recreate the fence. required height, strength and custom design.

The advantage of fences made of welded mesh

Sectional metal fences welded mesh they are light in weight, they are durable and resistant to aggressive external influences, the installation of such fences is not laborious, it is done by hand in a short time, besides, the mesh does not create shadows and is optimal in pricing. When defects appear, it is easy to replace damaged areas.

Welded mesh for the fence - photo

Types of metal welded mesh for the fence

Metal meshes are made by welding wire of various thicknesses at the points of contact (spot welding). At the same time, the cells can be of very different sizes and shapes - from standard square and rectangular, to unusual polygonal (rhombus, trapezoid and others). A layer of polymer or other coating is applied to the surface of the grid to protect it from corrosion. The result is a canvas, which is used for fences.
Varieties metal mesh for the fence, depending on the type of coverage:
Welded mesh with a polymer (polyvinyl chloride) coating, usually such a mesh has a green or other color. The polymer is applied to the surface of the wire by immersing it in a solution or applying powder dyes in special cabinets.
Mesh welded galvanized and non-galvanized. The manufacturing process may differ in the order of steps. Either an already galvanized wire is welded, or, on the contrary, a mesh is produced, which is then galvanized or sent for sale uncoated.
Mesh welded with galvanization and polymer coated. This mesh is the most durable, but at the same time very expensive. For a conventional fence, the use of such a grid is impractical.

The mesh is produced and delivered to consumers in the form of panels and rolls. Rolls are produced weighing from 50 to 500 kilograms, up to two meters high. The length of the mesh in a roll is from 15 to 33 meters.

Installation of a sectional metal fence

The first stage is to study the territory, as well as measuring the required length of the future fence.
In places where the fence will pass, you should level the soil, remove shrubs and trees, remove large stones and foreign objects.

Installation of supporting pillars without the use of concrete.

Racks before installing them in the ground (concrete) must be protected from corrosion. To do this, we apply a layer of paint, bitumen on the lower part of the columns, or wrap them with a piece of roofing material.

The convenience of installing support posts without the use of concrete lies in the fact that without the use of concrete, you can install a fence at any time of the year, even in winter. Besides, installed fence easy to dismantle if necessary. The method is optimal for installing a fence on heaving soil.

We will literally hammer the fence into the ground. Therefore, it will be necessary to prepare small diameter depressions in the soil for supporting pillars. All wells must be of the same depth and located on the same line, so that the fence eventually comes out perfectly even. The distance between wells takes from 250 to 300 cm.
We insert metal racks into the prepared recesses and hammer them into the ground. The depth of the wells is taken equal to 1/4 of the length of the support column. However, if the depth of soil freezing is too high, then the depth of the pit should be increased.

Pay attention to the verticality of the installed pillars and their height, which should be equal along the entire perimeter of the fence. Use a tape measure building level and threads stretched over pegs for easy alignment of supports.

In the space between the soil and the walls of the pillars, we fill it with a butch of fine fraction (a mixture of crushed stone or gravel with sand) and carefully tamp it down.

Careful tamping ensures the immobility of the pillars and the strength of the installation of the fence.

Installation of supporting pillars with concreting

Similarly to the first method, it is necessary to mark a place for wells on the site, dig them out, checking the distance between them and the depth.
We insert racks into dug wells and fill them concrete mortar.
So that the pillar does not deviate, for the period of hardening of the concrete solution (two days), it should be strengthened with spacers.

Particular attention should be paid to the pillars located in the corners of the site and those on which the gate (gate) will be fixed. Such racks require particularly strong fastening, as they bear additional loads.

The foundation for the fence tape monolithic

Such a foundation is able to withstand significant loads and provide proper reliability and stability to the future fence.
Before starting work, you should make markings and dig a trench. In this trench, we additionally dig holes for the pillars. Install wooden formwork into the trench. We lay reinforcement for strength. We install racks and fill the entire trench concrete mix. We strengthen the pillars with spacers for the period of solidification of the solution.

Fastening the metal mesh to support pillars
In order to fasten a sectional metal fence to the supporting poles, you will need: brackets with bolts and nuts to ensure that the mesh is pressed against the pole (or clamps instead of brackets); connecting clips for joining canvases, a screwdriver, corners, a welding machine.

We prepare sections of a fence for installation. We lay them out next to the racks.

We weld metal corners on the racks. They will serve as a fastener for the fence sections.
In the corners of each section, we drill holes through which we fasten the sections with screws.

Another method allows you to do without connecting brackets, but it will be difficult to dismantle the fence if necessary. For this section of the fence we connect with metal corners on racks and weld them.

Welded mesh fence - photo

If instead of sections a canvas is used, the edges of the two rolls should be attached to each other, one extreme wire should be removed and the edges of the canvases should be connected with it, forming a single monolithic one. After that, we unfold the grid and fix it on the racks with brackets or clamps.

Video - welded mesh metal fence

Welded mesh- This is a metal wire that is interwoven using spot welding. The main criteria for buying it are the size, shape of the cells (i.e. diamond-shaped, rectangular, trapezoidal) and the thickness of the wire itself.

Advantages of a fence from a welded grid is simplicity installation work, which the user can perform independently, increased anti-corrosion properties of the fence, excellent rigidity, environmental friendliness and minimal maintenance requirements.

You can have us, the company "Integrated Supply of Metals".

To date, there are several types of welded mesh:

non-galvanized

galvanized

Color coated galvanized

PVC coated

Grid to create a 3D fence.

Non-galvanized mesh is a steel wire with a thickness of up to 10 mm. If you have limited financial resources, then we recommend buying this particular variety, because it is the cheapest. However, compared to other types of welded mesh, its service life is much shorter due to the influence of weather conditions.

The fence made of welded galvanized mesh differs from the previous version in that zinc is applied to the wire. By the way, you can immediately buy a roll of galvanized metal.

Polymer-coated galvanized mesh is the strongest and most durable. The only thing that can stop you is a fairly high cost. Not every owner of a summer cottage can afford to buy such a grid.

The PVC fence is usually made in green (but at the request of the customer the manufacturer will paint it in any color) and covered with a polymer coating using a special powder paint or by dipping the material into the polymer.

Mesh for creating a 3D fence is a new product, the production of which requires a certain bend, which leads to the so-called three-dimensional effect.

Installation work

So, you have decided to install a welded mesh fence yourself. The installation of the fence itself consists of the following steps:

markings;

digging holes (pits);

installation of support pillars;

mesh tension.

In order to mark the site, you need a rope, tape measure and stakes. The rope is stretched between the pegs, after which the places where the poles will be located are indicated. Optimal distance between them - about 2-2.5 meters. If it is only, then the deflection of the grid is possible in the future. Also, you immediately need to make a margin of 15-20 cm for the thickness of the pillar and the size of the foundation.

When installing, be sure to note that on a site with a large slope it will be quite problematic to pull such a fence, because in an inclined position it is impossible to fix the mesh with high quality.The only way out of this situation is the terracing of the area, it provides for the installation of pillars of greater power and length at the places of difference, i.e., on the one hand, the grating is mounted lower, and on the other, higher.

The depth of freezing of the earth (the depth of the pit should exceed it by 20cm)

Post size

Keep in mind that the diameter of the holes should be larger diameter poles a couple of centimeters. In the depth of the well should go to the level of ¼ of the length of the pillars, the size of which is from 50 cm.

If you want to put a fence in the country, then the most preferred option is to use metal poles, because they are more durable and reliable than wooden ones. Wall thickness metal pipes should not be less than 2 mm, and a diameter of up to 12 cm.

Direct installation of the fence

First of all, install the corner posts, because they have the most emphasis and pressure. Also, before installation, place a layer of sand or fine gravel in the well.

The next stage involves the following work:

the pits are filled with a pre-prepared concrete solution (1 hour of cement, 3 hours of sand);

the columns are inserted into the well and aligned;

the concrete base hardens and after a couple of days you can finally complete the work.

After the concrete has hardened, by welding it is necessary to attach hooks to the posts to fix the welded mesh. To organize the hooks, wire, screws, nails, or other improvised materials that you can find and that can be bent are used. By the way, you can also buy special fasteners(clips, staples), U-shaped clamps, so as not to bother with it. Next, you can proceed to stretching the direct mesh.

To do this, gently straighten the roll and secure the net with hooks in several places near the first post. By the way,if you do not first cut the mesh into sheets, but fasten it immediately with a roll, then use staples to make it as reliable as possible. For increased strength of the fence, it is recommended to thread a thick wire with a diameter of about 4 mm through the first and last row of cells.After the mesh is hung, the wire should also be welded to the pole.

Next, gradually unwind the mesh from pole to pole for exactly one span, and after a certain distance from the mount, thread a vertical rod, due to which the mesh will be stretched. This is done so that it stretches evenly without deflection.

It is most convenient if the installation of the grid will be carried out by two people, i.e. one person pulls the grid at the top, and the second - from the bottom. Thus, you will get a smooth and perfect fence. After the site is fenced, you should bend the hooks on all the posts. And that's it, the fence is ready. If desired, the fence can be painted in any color you want.

Some Helpful Tips

So that the cement does not harden, prepare it first separately for each pit.

It is best to install the fence in the season when the ground is loose and easier to dig (this is spring or early autumn)

If you decide to use the mesh in a roll, then unfold it and leave it in this position for a couple of days so that it straightens out for ease of further installation.

Best to apply metal poles, because wooden ones may not withstand a heavy mesh.

When constructing a barrier, it is not always possible to use materials that have a monolithic surface. This most often applies to situations where it is necessary to distinguish between adjacent garden plots on which are grown various plants. In this case, it is most advisable to build a fence from a welded mesh with your own hands. Such a construction will save the neighboring and own territories from shading and will not interfere with the full development of plants, thereby causing dissatisfaction with people living in the neighborhood.

Material selection

First of all, you need to choose from what type of material the fence from the welded mesh will be made. There are four main options that differ from each other in coverage.

Mesh without coating

It is usually sold in rolls and is cheap. Its use will be appropriate among bushes, since the surface of this fence will rust very quickly. Painting will be economically inexpedient and time consuming. On the other hand, if there is dense vegetation on the border of the plots, and it is necessary to protect yourself, mainly from migratory animals, then this option is quite acceptable.

galvanized mesh

Perhaps the most practical will be just such a material. It is not much more expensive than the first one, and taking into account the total price of the entire structure, the difference will be about 10%. After all, the price of the structure includes poles, hardware and components for concreting supports.

Galvanized painted mesh

Its coating is applied according to the same principle as on corrugated board. First, the product is galvanized, and on top it is also painted. This is a very durable cover. The only thing it is afraid of is abrasive exposure. Rains and irrigation of the garden lead to regular spraying of the soil-containing substance, which leads to the abrasion of the protective layer and subsequent corrosion. Therefore, it is recommended to fix such material slightly above the ground surface, and if necessary, seal bottom space you can apply the construction of a concrete or other base.

Polymer coated mesh

This type of protection is the most expensive, but also the most effective. It is resistant not only to temperature effects, but also to friction. In the most viewed areas, it is worth using this option, since it has a beautiful appearance and will allow without additional costs to isolate the territory along the entire required height.

In addition to the fact that the material differs in the type of coating, it may also differ in the method of execution, which happens:

Welded flat mesh
Welded mesh 3d for fence

The last title is issued specialized enterprises, which, as a set for this item, supply special poles and fasteners to create an aesthetic and reliable fence.

Preparation of tools and material for the fence

Once the welded mesh for the fence is selected, you can proceed to preparatory work, one of the stages of which is the completion of the contractor essential tool. This is an important stage, since the inability to carry out this or that operation will greatly slow down the construction, and the material prepared and laid out on the site will interfere. Therefore, it is best if all the necessary components are already purchased and delivered to the construction site. Here's what will be needed:

Instruments

Surely everyone assumes that you will definitely need basic tools, such as:

Level
Pegs
Roulette

Digging tool

Any means for digging holes that can be found on the farm will do. Yamobur can be used both manual and electric. Of the shovels, the “American” will be the most convenient, since it has a curved end, and this is very convenient when digging holes for poles.

Container for mixing solution

Concrete mixer (if any)
Trough with chopper or shovel (optional)

Mesh mounting tools

Welding machine (if fasteners will be used with it)
Drill
screwdriver
Screwdriver
Bulgarian
Rebar section or thin pipe to stretch the mesh

materials

Let's figure out what materials will be needed to install a welded mesh fence and decide on their choice.

pillars

As pillars, it is best to use round or profile pipes with a diameter of 40-150 mm. The use of concrete or wooden poles. In the latter case, it would be better to protective treatment wood.

Cross jumpers

To create additional rigidity for the mesh coating, you can use a thick wire threaded through the mesh. Also, spans can be attached to pipes or fittings attached between the pillars in their upper and lower parts. You can not do this if the supports are often installed, and the mesh has sufficient rigidity.

Wire can be used up to 5 mm. Reinforcement or pipe for rigid fastening is recommended to be used from 10 mm.

fasteners

To attach the grid, you can use:

Bolt-hooks (the best option)
self-tapping screws
metal plates
U-shaped clamps
Clamps with bolts and nuts

Support concreting materials

Cement
Sand
Rubble stone, slag or crushed stone

Fence installation

Like any other type of fencing, metal fence from a welded mesh, you need to start doing it in stages.

Plot marking

With this procedure, it is necessary to take into account, first of all, the distance between the future supports. It depends on their height, the thickness of the selected material, the parameters of the material that will close the spans.

The recommended distance in such cases is usually 2-3 meters. More frequent arrangement of racks will entail additional consumption of material for them, a greater distance will require the use of transverse stiffeners, which will have to save the mesh from sagging. When marking, it is necessary to take into account the dimensions of the rolls or finished sections of the mesh, as well as the dimensions of the entire area. All these values \u200b\u200bneed to be compared and plan the distance between the supports in such a way that the joints of the fence cover fall on the surface of the racks.

Pole installation

To do this, you need to dig or drill holes in the marking places. Depth can be 0.7-1.2 meters. It depends on the size of the racks and the density of the soil. It is also worth considering the landscape of the earth's surface. On the slopes the depth of the pits needs to be done more. This is not only necessary, because in such places the soil tends to slide, but also because streams of water flow along the inclined surfaces when it rains. This leads to a softening of the soil and a decrease in its ability to hold objects fixed in it.

After the pits are ready, prepared supports are installed in them and concreted. At the same time, it is necessary to strengthen the installed racks with wedges in order to avoid the appearance of a roll during the pouring and drying of concrete.

Mesh installation

Installation is best done no less than 7-10 days after the concreting of the supports. It was during this time cement composition will gain the required mounting strength. Although many masters install the grid the very next day, this is not the best option.

If transverse pipes are involved in the fastening, then they must be immediately welded or attached with self-tapping screws. It is better if these stiffeners are placed between the sides of the racks that look at each other. With a carefully selected size of the jumpers, they will act as spacers and protect the supports from convergence under the influence of mesh tension.

When used against sagging wire, it is threaded after hanging the net, but before tensioning.

The diagram below shows various options fixing the welded mesh with clamps

The mesh covering of the fence can be fixed in several ways:

Welding
With clamps
By hanging on hooks
Self-tapping screws and pressure plates

It is important that when attaching the mesh to produce its timely tension. If the installation is carried out on hooks or self-tapping screws with plates, then first you just need to hang the material on them, and then perform a uniform tightening.

When welding fastening, it is necessary to stretch the mesh immediately until the final fixing. You need to stretch the material by threading it vertical pipe or fittings mentioned above. There must be at least two people involved in this process. One produces tension, the other at this time fastens the mesh to the post. The use of a vertical rigid rod is due to the need to produce uniform tension over the entire height, which will be very problematic to do by hand.

Now it remains only to decide on the method of attaching the grid and begin installation

Final actions

After hanging the mesh cover, you need to check the level of all racks, paint the fastening joints (if necessary), poles, transverse pipes or stretched wire.

A sectional fence made of welded mesh, with proper preparation, can be built by anyone with minimal training House master. There are several recommendations, following which will help to get the best result:

It is important at all stages to monitor the level of the installed pillars and not to apply excessive force when pulling the mesh.
Before painting any metal surfaces must be thoroughly cleaned sandpaper, degrease with solvent and prime. This will ensure the durability of the paint and protect against additional costs further.
If it is planned to perform under the main fence concrete base, then it must be done together with the concreting of the pillars.
For any work with cutting and welding mechanisms, you should not forget about your own safety measures and use protective equipment and clothing.

Photo of welded fences

We picked interesting photos fences from a welded grid. Please note that, nevertheless, the installation and installation of this type of fence is quite simple and budgetary. Therefore, this type of fence is more suitable for summer cottages.

A metal fence is installed to protect your property.
This is its main function, but a modern fence is usually installed
with an eye on the "appearance" of the house, landscape design and other details that ultimately create what is commonly called an individual style.

Therefore, when choosing a fence for your home, it is very important to take into account such moments as: the combination of the style of the fence with the style of the house, the strength of the structure, the connections of all parts of the fence, the presence of an anti-corrosion coating, etc.

High-quality 3D metal fences are one of the strongest and most durable types of fences.
Therefore, it is recommended to install a 3D metal fence.

The fence serves as protection and is an external manifestation of the quality of life, the hallmark of the house, the style of its inhabitants. A modern and stylish fence can be the pride of the owner.
Fences can be very diverse, as well as their purpose: protection from gusts of wind, child safety, hiding not too beautiful places of ownership - each of these cases requires its own individual approach.

Our company presents 3D welded fences on the Russian market.

Sectional fence made of 3D welded mesh in terms of durability it is not inferior to a brick or stone fence.
The fencing elements are industrially manufactured from high-quality steel on automatic machines. Installation of a panel-type fence is much faster than the construction of any other capital fence.

Purpose of panel welded fences 3D:

cottage settlements- protections for cottages and houses;
railway railings, highways;
park areas;
fences industrial facilities;
administrative buildings and territories;
sports facilities and territories;
car parks and car dealerships;
storage area fencing.

Advantages of 3D welded mesh fencing:

reliability and quality;
high color fastness;
does not require maintenance;
ease of installation;
cover warranty - 10 years.

Durability of 3D welded railings:

durability and high quality products is achieved thanks to a special steel processing technology - microcrystalline phosphating. Microcrystalline phosphating is a technology recognized and used in the automotive industry. Unlike conventional amorphous type phosphating, this technology can guarantee the high quality of products and increase the durability of products by 3-4 times.

To date, welded fences are presented in the most popular
on the Russian market color: moss green (RAL 6005).
All profiled products are covered by a company guarantee.

3D welded railings mean reliability, quality and ease of installation.

The company "Vash Zabor" specializes in the manufacture of a variety of fences for objects for various purposes, including country estates and summer cottages. Our masters will promptly produce and qualitatively install any type. The requirements of different categories of customers for country fence, are often very different - it is very important for someone that it be pretentious and pompous and correspond to a mansion made in vintage style and surrounded by smooth lawns. Other clients prioritize such fencing type selection criteria as practicality, functionality and low cost. We can recommend fences made of welded mesh, economical, durable and easy to install.

sectional fences of this type have other advantages - they are durable, not susceptible to aggressive influences environment, they have a small mass, which ensures ease of transportation to the installation site. Mesh sections, unlike high solid fences, freely pass Sun rays, which is very important if suburban area It is used not only for recreation, but also for growing horticultural crops. In addition, welded mesh fences can be easily repaired or replaced with a new segment if damage and defects appear.

Types of welded meshes used in the construction of country fences

Welded metal mesh is made from wire of various sections by spot welding. The cells of such a grid can have different size and form. The mesh surface is coated with a layer of polymer or simply zinc coating, reliably protecting it from corrosion.

Type protective coating welded meshes are:

polymeric with the application of a polyvinyl chloride coating by immersing the mesh in a dye solution or by powder coating in special cabinets;
galvanized with a protective layer applied either to the wire or to the finished mesh;
having double protection - both galvanized and polymer layer.

Installation of fences from a welded mesh

Masters of the company "Vash Zabor" in a short time mount fences made of welded mesh sectional type on sites of any complexity, including slopes. The perimeter of the fenced area is marked out and holes are dug or small wells are drilled at the places where the pillars are installed. The columns are installed in prepared pits and concreted. In this case, it is necessary to ensure that the holes for the pillars should be at least 2 times wider than the cross section of the support. Their depth is usually 0.6 meters.

The solution hardens for about a day, after which sections of the fence are attached to the posts. More cheap option fences made of welded mesh - rolled, in which the mesh is pulled using a special device for this. A well-mounted fence made of welded metal mesh looks attractive and easily fits into any style of a country or country estate.

Our prices for fences made of welded mesh