Overview of nozzles for a drill for work in the country. Types of nozzles for a drill for cutting metals Safety rules

Nozzle-scissors "Cricket" Enkor 14210 is used in conjunction with any drill. Designed for cutting metal up to 1.6 mm thick. It is fixed in the cartridge, which drives the nozzle mechanism. Works on the principle of cutting scissors. Allows both linear and figured cuts, suitable for cutting material during ventilation and roofing work.

Nozzle for cutting metal "Cricket" manufactured by Enkor is intended for installation on devices with a rotary chuck - they can be represented by drills or even small ones.

Due to its design, it is able to completely replace specialized scissors, carrying out easy cutting of steel, aluminum and other metal sheets. The advantage of the model is small dimensions, low weight, as well as a well-thought-out design that minimizes the percentage of torque losses.

Video review of the nozzle Enkor "Cricket"

Characteristics of the scissors nozzle "Cricket" for metal up to 1.6 mm Enkor 14210

The device is designed to complete screwdrivers and corded drills that have a power of at least 0.4 kW - this indicator is average for this category of tools. This somewhat limits the scope of its application, since devices with a less powerful drive may be presented on the market. The internal mechanism is a standard hex shaft - such a shaft provides a more secure fit than a round one and has a much lower chance of slipping.

The maximum thickness of the cut steel sheet, not subjected to additional processing, is 1.6 mm. When working with alloyed or high-carbon materials, the manufacturer recommends reducing this value to 1 mm. If the operator needs to work with aluminum, copper and other relatively soft metals, then the sheet can have a thickness of 2 mm. Thanks to this, the "Cricket" attachment is a good alternative to traditional hand tools. The width of the cut track does not exceed 1.6 mm - this value allows for significant material savings when performing complex work with small objects.

Also, the functionality of the device includes the possibility of pre-drilling holes with a diameter of at least 11 mm. The length of the nozzle is 180 mm, which makes it possible to work in confined spaces with the maximum level of convenience.

Features of the nozzle-scissors "Cricket" Enkor 14210

The undoubted advantage of the nozzle for metal is the absence Supplies, a counterweight cutting wheels for grinder and jigsaw. "Cricket" will help not only to quickly cut sheet metal, but also to quickly make a hole large diameter in sheet metal. Also with this nozzle, you can cut holes of arbitrary shape from pre-drilled holes with a diameter of 11 millimeters. In addition to all of the above, it is important to point out that the Cricket nozzle is very simple and convenient to use, does not require adjustment at all, which means that even a beginner can easily master it, and a professional will appreciate the convenience and speed of work.

For more reliable fastening of the device, a plastic handle and a punch are used - they are included in the delivery. This allows you to significantly improve the accuracy of performing permissible types of work. A weight of 0.4 kg does not significantly increase the load on the operator's hands compared to the dead weight of the appliance. Drill attachment for cutting sheet metal up to 1.6 mm thick. Works with any drill.

At correct selection the number of revolutions of the drive shows excellent cutting results: it does not crease the edges of the metal, and at the same time they do not turn out sharp.

Characteristics

Contents of delivery

1. cricket
2. blister

Features of metal scissors Enkor 14210

• Ideal for punching holes in false ceiling(panels) for spotlights.
• For working with metal sheets up to 1 mm thick.
• Well cuts not thick metal 0.3-0.4 mm.
• Be sure to use safety goggles and gloves.

Advantages

• Suitable for cutting metal tiles, both along and across the wave.
• Cut edge without burrs.
• Does not heat or melt the coating
• It is indispensable for working with a painted sheet, metal tiles, which are not allowed to be cut with a grinder.

Who has not encountered during the repair the need to cut a metal part? Among the masters, most likely there is no person who would refuse a powerful portable tool. In most cases it is used:

• grinder disk;
• milling machine;
• scissors for cutting metal.

But modern market power tools does not stand still, and now there is a nozzle on a drill for cutting metal.

Various types of cutters, as a result of repeated repeated movements, carve metal using a matrix. As a result, durable metal can be processed. In this way we cut, make holes or grind metal surface. Point influences allow you to work accurately, without disturbing the structure of the elements. In addition, the natural protective layer products.

Using nozzles, you can act on the following metals:

• two-millimeter aluminum plates;
• copper, brass, iron, zinc and steel elements;
• galvanized parts 1.5 mm thick;
• stainless steel 0.8 mm thick.

Drill use

It's no secret that a drill can be used not only as a drill, but also as a multifunctional tool. There is a whole set various devices facilitating the work of the worker.

For example:

• cutter for metal for a drill avoids monotonous self made file;
• nozzle scissors on a drill provides the ability to cut metal sheets and elements;

• drill attachment for cutting metal tiles in turn helps to accurately cut the roof from sheet metal at any angle.

Working with this kit requires some skill, but over time you will understand the advantages of this method.

Let's consider each option in more detail.

For cutting tiles

Another name for this drill attachment is cricket. The set is used for both smooth surfaces and profile iron sheets. The advantage of this cutter is the ability to create a smooth cut, without burrs and bumps.

The cricket drill attachment is convenient to use for:

• cutting thin-sheet products;
• cutting parts from metal sheets.

Since its application does not depend on spatial arrangement, you can easily cut a horizontal, and even a vertical sheet.

Nozzle scissors

Of all the nozzles presented, this is the least similar to a drill. She turns the drill into electric instead of nibblers. They work according to the principle straight cut , cutting through the metal with sharp edges using mechanical force. This is a rougher way to cut metal and plastic. Such scissors perform only a straight cut, it is very difficult to change its direction during operation.

This set is more suitable for cordless instruments.

cutter

In another way, this nozzle is called cone. It is designed for processing wood and metal products:

• cutter replaces a file;
• significantly speeds up the grinding process;
• eliminates defects.

One set may include cones different shapes, so for each specific situation you can choose the most suitable nozzle. Some of them outwardly practically do not differ from the drill.

Crowns for metal

In addition to the main nozzles, there are other devices, for example, a crown for metal. This is a special drill designed for making wide holes.. Its use is due to the need to lay communications. The downside of a crown for metal is its roughness: the edges of the hole made require additional processing. It is in such cases that the cutter comes into play.

The set of crowns can include both simple edges and with diamond-coated. They can be used to drill concrete floors and fat a metal sheet.

riveter

Such a nozzle as a riveter on a drill differs from a conventional cutter or cutter. It is used to connect or secure with small rivets. Riveting is a rather tedious process if done by hand. In addition, you will have to use several conventional riveting tools at once. That is why riveting with a drill and a riveter is very popular with builders.

Unique fastening method requires some preparation. Special holes are pre-made in the parts using conventional drills. The riveted parts are securely connected to each other, forming a strong connection.

The nozzle on the drill helps to process metal quickly and efficiently without special expensive machines. They can be used with different types of drills, but its power should not be lower than 2700 rpm. Of course, a drill is not always able to replace professional tools, but for unstable repair work she fits perfectly. Ease of use is also a plus: you do not need to spend a lot of time mastering any nozzle.

metal cut different ways: mechanical (drilling, milling and countersinking), gas, hydraulic, laser, plasma and other methods.

angle grinder - angular Grinder"Bulgarian"

Mechanical cutting with grinder, guillotine, circular saws or tape machines used in small farms and medium-sized enterprises. The main disadvantage of mechanical cutting is the rough effect on the material. As for strengths, then we can note the economy and high precision processing.

Types and application of nozzles for a drill

Replacing the nozzle with a drill was faced by many who started repairs. A well-chosen tool allows you to get rid of many problems, for example, from grinding work. Nozzle for drill external characteristics resembles a punch. Metal cutting is carried out due to the matrix and circular rotational movements.

Nozzle on the drill "Cricket"

AT construction stores Various products are sold, among which are:

• The nozzle "Cricket" is a cutting scissors. "Cricket" makes an even cut on a flat and profiled metal. It is worth noting that "Cricket" can be used to process polycarbonate or plastic. "Cricket" is ideal for cutting sheet steel and profiles. In addition, the drill attachment can be used for cutting plastic and polycarbonate.

The thickness of sheet metal should not exceed 1.5 mm, stainless steel 1.2 mm, and aluminum 2 mm. "Cricket" is considered universal because it allows for horizontal, vertical, and internal cuts. The accessory is considered indispensable in roofing, especially when the roof is covered with a profile or metal tile.

• "Steel beaver" is used for cutting corrugated board, metal tiles and other flat profile sheets. "Steel beaver" copies the scheme of operation of cutting shears, however, during processing it does not form sparks and does not burn protective covering. The nozzle is able to effectively process different sheets metal, but not more than 2 mm;
• Special attachments allow different types cutting. For example, curly and curvilinear are often installed on a drill when replacement gutters are required. drainage system or when repairing ventilation parts. The following types of nozzles are common in the construction markets: ASKO YT-160A, EDMA NIBBEL and Sparky NP 1.8 L. The listed models are easy to install the device and do not have significant differences in the scope of application. The difference between them is only in the thickness of the processed sheet. This option is best checked with the seller.

Nozzles for grinders and circular saws

At first it was said that the Bulgarian is universal tool, its capabilities cannot replace only a drill. It is used for cutting, grinding, polishing, sharpening and other types of work.

Discs are made of heavy-duty abrasive materials. The classification of canvases for grinders is based on their size, discs are known from 115 to 230 mm in diameter. The thicker the disc itself, the greater the force of impact on the material and the higher the speed.

Despite their versatility and many positive feedback, the grinder also has several disadvantages, for example, it damages neighboring sections of the workpiece and becomes the root cause of corrosion development.

Circles for a circular plate are divided into two categories: discs for soft materials(wood, plastic, tiles, etc.) and metal. Devices for cutting metal products differ from their counterparts in a negative sharpening angle, that is, the teeth are directed in the opposite direction from the direction of rotation. It is worth noting that specialized nozzles are found on the construction market, for example, for laminate or plastic.

Circular saws modern type can process the material without heating it. That is, the processed part can be taken with bare hands, without fear of burns. It should be noted that cold cutting technology is used only in expensive models.

The difference between a drill and other tools

The drill is not suitable for efficient processing of thick metal sheets. The maximum that she can cut is steel sheet 2.5 mm thick. Among hand tools the grinder stands out, this tool is able to effectively process metal blanks of almost any thickness.

As for circular plates, they are distinguished by high productivity and processing quality, however, the machine is not suitable for processing thick sheets.

Video: Nozzle H1 on the "grinder"

HPM is an analogue of the actuating mechanism of punching shears. It works on the principle of a die cutter. The source of movement for it is the electric motor of the drill. rotational movement from the cartridge is transmitted to the connecting rod-crank mechanism of the nozzle. This mechanism converts it to reciprocating and sets the punch in motion. The latter creates a cutting line of the desired shape and width.

Taking into account the coincidence of the schemes of operation of the actuating mechanism of shears and HPM, we will consider the principle of operation of the latter using the example of the kinematics of electric punching shears.

Explanation for the figure:

1 - matrix holder;

2 - matrix;

3 - punch;

4 - slider;

5 - connecting rod;

6 - crank shaft;

7 - electric motor.

The rotation from the electric motor 7 (through a two-stage cylindrical gearbox) is transmitted to the shaft of the crank mechanism 6. From it, the reciprocating motion is already transmitted through the connecting rod 5 to the slider 4. The punch 3 is fixed in the slider, and the matrix 2 is in the die holder 1. The material to be cut is placed into the gap between the die and the punch. When the latter moves down, it is incised and moves in the right direction (possibly in any direction). Successive notches form a continuous cut line. The cut workpiece is separated along it.

What metal can be cut

The following metals can be machined with HPM:

• aluminum. Thickness ≤ 2mm;
• copper, brass, sheet iron, pure zinc and steel coated with zinc - thickness up to 1.5 mm;
• stainless steel, up to 0.8 mm thick.

What determines the quality of the cut

Enterprises, taking into account market demands, produce NRMs that operate on the same principle, but, of course, various designs. They have different specifications:

• some HRMs are designed for strictly defined grades and sizes of materials, have a simple design, higher reliability and lower cost. Devices of this group provide higher quality products. But if you need to cut various metals, you should purchase a whole line of such devices. Therefore, they are used in the mass processing of metal of the same size;
• others are universal nozzles"for all occasions". They are more complex, more expensive and the quality of processing on them is somewhat worse. For getting best quality products, you should choose a tool with a set of dies and punches.

You need to work with nozzles carefully so as not to damage the surface of the sheets. It is very important to choose the right number of revolutions of the drill. This will allow you not to crush the edges of the metal, and they will turn out sharp. For example, for metal of small thickness it is better to use a drill with a speed of 2700 ... 3000 rpm. Proceed directly to the cut should only be when the armature of the tool has gained optimal speed.

Nozzle "Cricket" for cutting metal

Very popular device HRM "Cricket". Consider it using the example of the Enkor 14210 model, which can be used in conjunction with any drill.

HRM "Enkor 14210" is designed for cutting metal up to 1.6 mm thick. It is fixed in the cartridge, which drives the nozzle mechanism.

Works on the principle of cutting scissors. Allows for all types of cuts. The use of tool steel for its production makes it possible to ensure maximum strength. The design causes a low level of noise and mechanical losses.

Nozzle for a screwdriver for cutting metal "Steel beaver"

The second very popular HPM device is the Steel Beaver screwdriver bit.

It is designed for cutting flat and profiled sheets (for example: metal tiles, corrugated board, etc.). In the process of cutting metal NRM "Steel Beaver" does not burn the protective layer metal coating(does not form sparks), which ensures safety anti-corrosion coating metal.

Characteristics of the NRM "Steel Beaver":

• recommended rotation speed of the drill rotor, rpm: 1500…3000;
• minimum cutting radius, mm: 12;
• permissible changes in the direction and angle of the cut, degrees: 360;
• maximum thickness of the processed sheet, mm:
  • steel - 1.8;
  • stainless steel - 1.2;
  • copper and aluminum - 2;
• weight, g: 400.

SPARKY nozzle

Cutting metal with a screwdriver or drill: advantages and disadvantages

Compared to other equipment, HRM has a number of advantages:

• high quality cutting with the ability to cut any shape;
• high economy. It is explained by the fact that consumables are not needed;
• high performance;
• the ability to process many grades of metal;
• comfortable operating conditions;
• the ability to work in conjunction with an electric or pneumatic drill (a screwdriver is allowed);
• does not require expensive maintenance.

However, despite all the advantages of NRM, it has disadvantages. To ensure high quality cutting, certain skills and dexterity are required. In addition, it damages adjacent sections of the workpiece and often becomes the root cause of corrosion.

What not to expect

In general, you should not think that HPM will always be a replacement for several tools. Unfortunately, its power is incomparably low compared to electric scissors. professional level. This attachment is not designed for effective processing of thick metal sheets. It should be remembered that the maximum that it can cut is a steel sheet 2.5 mm thick. In the conditions of professional and, moreover, industrial metal processing, a more powerful specialized tool, among which the Bulgarian stands out. This tool is capable of effectively processing metal workpieces of almost any thickness.

To the entry "Nozzle for a drill for cutting metal" 2 review(s).

Leave your review

When performing construction or repair work, it often becomes necessary to cut a metal blank. To do this, use special equipment in the form of a cutter, grinder or. However, it is not always available. You can cope with the task with the help of a nozzle on a drill for cutting metal, which will cut products of small thickness.

Many craftsmen are accustomed to using a drill for its intended purpose, namely for drilling holes. But not everyone knows that this tool can be turned into a multifunctional device, supplementing it with special nozzles, fixtures and stands, which will make the drill universal and indispensable in any job.

With the help of special nozzles for a drill, which can be bought at any specialized store for affordable price, drilling of various diameters, cutting, grinding, polishing, twisting, mixing and milling can be carried out. There is also a pump attachment for a drill, designed to pump fluid. The attachment for plucking chickens is simply indispensable in household. With the correct and competent use of additional prefixes, the result will not be the worst quality, as well as when using a special single-purpose device, but the cost of such a universal tool will be several times lower.

By purpose, all existing nozzles are divided into:

• equipment for drilling holes and crowns;
• scissors for cutting metal;
• stops;
• corner fixtures;
• grinding and polishing nozzles;
• equipment for milling wood and metal;
• sharpening devices;
• transfer nozzles.

When working with any nozzle on a drill, you must follow the safety rules:

• the equipment must be securely fixed in the tool chuck;
• the drill must be held with two hands, which is especially important for powerful models;
• constantly adjust the pressure of the tool;
• work in personal protective equipment;
• after completion of work, do not touch the drill for several minutes to avoid burns.

What are drill bits for metal cutting?

Equipped with a special nozzle for cutting metal conventional drill turns into a punch or cotter pin. Device punches metal product due to the implementation of numerous reciprocating movements along the internal cavity of the matrix. As a result, an even cut line 3.1 mm wide is formed with the protective layer on the surface of the metal sheet preserved.

Important! The maximum efficiency of the nozzle is achieved only when used in conjunction with electric drill, the rotational speed of the cartridge of which is at least 2700 rpm.

The metal nozzle on the drill can handle the cutting of such metal products:

• aluminum, up to 2 mm thick;
• made of brass, copper, zinc, galvanized steel and sheet iron, up to 1.5 mm thick;
• made of stainless steel, up to 0.8 mm thick.

Using a drill bit for metal cutting has a number of advantages:

• the cut is of high quality;
• there is no need to constantly purchase consumables, which saves money;
• provides high productivity when cutting metal;
• versatility of the device;
• the equipment is convenient and easy to use and maintain;
• the nozzle can be used for electric and pneumatic drills;
• with the help of a nozzle it is possible to carry out cuts of any configuration.

Despite all the advantages listed above, in order to get a high-quality cut, some skills and dexterity are required to work.

Popular nozzle models

Today there are a large number various models nozzles for a drill, thanks to which you can not only cut metal in a straight line, but also make curly cuts. This is required for installation. ventilation ducts, roof structures, gutters. Using the nozzle allows you to cut in any spatial position without making any preliminary adjustments.

Nozzle types:

• cutting nozzle "Steel beaver" is used for cutting metal tiles, corrugated board and any flat profile sheets;
• universal nozzle "Cricket" is used for cutting profile metal, polycarbonate and plastic;
• special nozzles for curly and curved cuts are represented by the EDMA Nibbek, ACRO YT-160 A, Sparky NP 1.8 L models, which differ in the thickness of the processed sheet.

Nozzle-scissors on a drill"Steel Beaver"

A classic drill attachment for cutting metal tiles and any flat sheets from metal in the form of a freely rotating shaft in a bearing with a fixed eccentric, it works on the principle of a crank mechanism with the difference that energy is supplied here for rotation.

A complete cutting tool support part located on the frame, and movable - connected to the eccentric. It is the movable part that performs reciprocating movements during the rotation of the shaft. A mandatory element of the design is the handle, which is fixed perpendicular to the axis of rotation of the spindle. During the increase in load, a reactive torque occurs, due to which the drill advances relative to the nozzle.

It should be remembered that the tool must be placed strictly vertically relative to the workpiece when making a cut. Failure to do so may result in damage to the product and injury to the operator.

The device resembles metal scissors. The drill attachment is used for cutting flat products or profiled sheets with large radius bends. The cutting line is easily controlled. During tool operation, the protective layer of the coating is not burned, which eliminates the formation of sparks and the likelihood of burrs. You can perform continuous cutting of products of any length. You can buy a drill attachment for cutting metal tiles and flat metal sheets for 1600 rubles.

Using the “Steel Beaver” nozzle for a drill, you can make a figured cutout for mounting roof ventilation elements or a gutter

Sheet cutting is performed at a drill speed of 1500-3000 rpm. The cutting angle is 360 degrees, the minimum radius is 12 mm. With the help of the “Steel Beaver” nozzle, you can cut:

• copper or aluminum sheet 2 mm thick;
• steel - no more than 1.8 mm;
• stainless steel - up to 1.2 mm,

Useful advice! For cutting a profiled sheet with bends of small diameter, use cutting shears of the Cricket type.

Nozzle on the drill "Cricket"

Nibblers "Cricket" got its name due to the characteristic noise during operation of the device. The nozzle is similar to the previous model, but has a different design of the working element, consisting of two cutting heads. The principle of operation of the nozzle "Cricket" is similar to an office hole punch. Accurate holes are squeezed out in the metal during oscillatory movements of the cylindrical striker with a high frequency. Thanks to translational movements along the marked line, it is possible to obtain an even cut.

Nozzle-scissors "Cricket" are used for cutting metal thin and profile sheets, and polymeric thin-sheet products up to 2 mm thick. Work can be done horizontally and vertical plane. Due to the ability of the tool to rotate 360 ​​degrees. can drill large round holes and make artistic cuts. You can buy a nozzle for a drill for cutting metal "Cricket" for an average of 1500-4000 rubles.

The tool can cut metal with stiffeners and various profile stampings in two ways. The first option involves repeating the surface of the profile, bending around the edges. It is used for products with an average bending radius. For cutting metal tiles, another cutting option is used, according to which the tool moves along the stiffeners without bending around the sheet profile.

Before you buy a nozzle for a Cricket drill, you should consider the main drawback of the tool. Due to the fact that the nozzle punch has a diameter of several millimeters, when cutting the product, a cut of a certain width is formed, which leads to certain material costs. The result is crescent-shaped metal chips with sharp edges, which should be disposed of immediately for safety reasons.

Useful advice! When working with the tool, do not wear soft shoes.

Nozzle for drill "Cricket" does not require adjustment, easy to use and maintain

One of the most popular models is a scissor attachment "Cricket" for metal up to 1.6 mm Enkor 14210. The tool is able to cut a sufficiently thick metal sheet in a straight or curved direction. You can buy a nozzle for a drill for cutting metal for 1300 rubles. Main Feature tooling is that during the cutting process a path is formed with a width of only 1.6 mm, which provides enough good level material savings.

The device can be installed not only on a drill, but also on a screwdriver. The metal cutting attachment is lightweight, which does not add weight electrical appliance. The kit includes a replaceable handle, which increases the accuracy of the work. The device has a low noise level due to its special design, which makes working with it more comfortable.

Nozzle on a drill for sharpening drills

This device consists of a plastic case, inside which a special-shaped emery wheel rotates. It is he who allows you to form the required sharpening angle on the working part of the tool. The circle is mounted on a shaft, which is connected to the drill with a special coupling. It is activated when the tool is turned on.

Many modern models have an end cover on the body, in which there are holes of various diameters for sharpening drills different sizes. These holes are made in such a way that the element for sharpening is in contact with the emery wheel in a certain position.

The principle of operation of the sharpening nozzle is simple - when the drill is turned on, the chuck rotates the whetstone located inside

The process of sharpening the drill is as follows. The product is inserted with the cutting part into the nozzle hole of the corresponding diameter. After starting the drill, the emery wheel begins to rotate, sharpening half of the drill bit. Then the product is turned over in the hole by 180 degrees, and the procedure is repeated. This sequence of actions is performed several times until the required parameters of the cutting part of the drill are reached.

A drill attachment for sharpening drills, which you can buy on average for 350-500 rubles, has 15 holes with diameters from 3.5 to 10 mm. Products can be sharpened at an angle of 180 degrees thanks to special form stone. Simple design device allows you to perform work quickly and without special skills.

Related article:

Types of structures, their characteristics and features. Review the best manufacturers machine tools. Comparative characteristics rates.

However, it should be remembered that the device is intended for sharpening cutting edges. For a full-fledged sharpening of heavily worn products, an emery wheel will not be enough for a long time.

Useful advice! When buying a nozzle of a certain model, you should consider the diameter of the drill chuck.

There is also another type of additive. This is a nozzle for a drill for sharpening knives and scissors, which is presented in the form of two emery wheels planted on a shaft and located at a certain distance from each other. The price of such a device is about 250 rubles.

The nozzle for and scissors for a drill is easy to operate, does not require special skills in its use.

Nozzle for a drill for grinding

Using a grinding attachment on a drill, old coatings, corrosion, nicks, scales are removed from the surface of the product. It is used for grinding glass edges, metal parts and products from other materials. Due to the small size of the equipment, hard-to-reach areas can be processed. average cost products is 500 rubles.

Grinding drill attachments are used for preliminary rough preparation of the base for future polishing. It is made in the form of a rod, on which grinding material is fixed in the form of a brush or sandpaper. There are various types of such devices that are used for specific tasks.

A cup attachment for a drill for grinding wood or other material is represented by a rod mounted on a chuck and a cup-shaped body filled with light or hard bristles. The body is made of metal or durable and lightweight plastic. Usually such a nozzle is used to remove old coating or corrosion from the surface.

Another variation is the disc attachment for a metal grinder, where the bristles of the grinding material in the form of a brass brush or steel wire are directed towards the edges of the disc from its center. This additive should be used very carefully, as it can easily damage the coating. The plate nozzle has a movable or fixed rod, which is fixed on the cartridge. Sandpaper is attached to it with Velcro.

Useful advice! It is better to purchase nozzles with a movable rod, which allows you to adjust the angle of the drill, while smoothly following the contours of the material.

Petal or fan grinding head represented by a rod on which pieces are fixed sandpaper or other abrasive material. It is used to perform radius grinding or surface treatment with complex profile. It can also be used for grinding holes, as well as carbide cutters or cutters that work on the principle of a file.

Grinding abrasive stones, mounted on the stem, are used to remove sagging, burrs, boring holes or leveling the weld.

Drill bits for polishing

After grinding the base, it is necessary to give it a smooth surface. This is done by polishing using special nozzles. They can be made from felt, wool, foam or felt. According to the degree of softness, they can be hard, soft, super soft and embossed. According to the method of fastening, nozzles with a stem, with Velcro and with a holder-lock are distinguished. Fan or disk nozzles are used for polishing discs, end devices are used for holes. The average price of a product is 250-300 rubles.

Many motorists have in their arsenal a nozzle for a drill for polishing a car. However, when choosing this product, you should consider some features:

• the device must be of high quality and professional;
• for efficient and safe polishing procedures maximum amount the speed of the drill should not exceed 3000 rpm, which is indicated in the characteristics of the device, otherwise the paint will simply burn out;
• the nozzle must be from a well-known brand;
• the device should not be included in the budget products;
• for polishing each individual part of the car should be used special nozzle designed specifically for this purpose.

The process of polishing a car with a drill is a very complex and time-consuming process that requires certain skills. If there is no experience, first you need to study all the subtleties this process, master the basic techniques presented in the videos on the Internet. It is better to start with inconspicuous areas of the body. The tool is configured to the desired parameters, taking into account required number revolutions. The nozzle should not be pressed too hard against the surface to high temperature don't burn the paint.

Nozzle for a drill for plucking birds

Plucking a bird is a very time-consuming process, especially when it is necessary to process several carcasses. Therefore, many farmers were constantly looking for new solutions not only to make work easier, but also to reduce the overall time. For this purpose, a feather attachment for a drill was specially developed, which removes feathers from a bird in a matter of minutes. It is similar to a dishwashing brush, only silicone fingers act as bristles here, which, when the shaft rotates, pull feathers out of the carcass. At the same time, the bird is brought from different sides.

Nozzle for a drill for plucking birds, which you can buy on average for 1500 rubles. processes poultry carcasses in just 2-3 minutes, leaving not a single feather. The result is smooth, undamaged skin. The device is effective not only for processing chickens, but also gives a good result when plucking geese. The drill attachment can be used not only for fresh, but also for frozen poultry.

Useful advice! It is not recommended to scald the carcass with boiling water before using the nozzle, which will reduce the efficiency of the processing process.

The main advantages of the drill attachment, which you can buy at any specialized store, are the speed, ease and portability of use, which does not require certain skills and additional processing of the carcass before plucking. A significant disadvantage of the device is that after this mechanical process, damage remains on the carcass, which worsens it. appearance. Therefore, if the bird is intended for sale, it should be plucked manually.

Other types of nozzles

When it is not possible to make a hole in the usual mode, you need to use an angled nozzle for a drill. The working head of such a device can be rotated at different angles relative to the axis of rotation of the drill chuck. The main disadvantage of the equipment is the increased risk of drill failure. Therefore, the most popular is angle nozzle for a 90 degree drill, which is fixed on the neck of the drill. The price of the product is an average of 800 rubles.

For craftsmen who are engaged in the manufacture of furniture, cutter bits are very popular. various kinds. They can be backed and pointed. With their help, you can make grooves of various shapes and depths, process holes and remove defects. The cost of equipment is in the range of 350-450 rubles.

To mix a solution of different consistency, a mixer nozzle for a drill is used, which is selected taking into account the density of the solution. So for mixing glue, liquid putties and other fluid mixtures, spiral devices are used that prevent splashing of the solution. For mixing concrete, nozzles with a tail in the form of a hexagon are used. Mixing mixtures with this nozzle will be carried out quickly and efficiently. However, in order not to reduce the efficiency of the device, it is necessary to maintain the volume of the mixture for kneading. The price of the nozzle is 500 rubles.

Useful advice! When choosing a mixer attachment for a drill, it is necessary to take into account the power of the tool. An increase in load can lead to burnout of the winding.

Indispensable in concreting is a vibrator for concrete on a drill, the price of which is about 900 rubles. It is used to compact the concrete mass during its laying, namely, it is designed to remove bubbles and air layers from fresh concrete. The nozzle requires a drill with a power of at least 1500 watts.

For woodworking home master you just can’t do without a nozzle on a drill for cutting wood, average price which is 2000 rubles. To pump liquid, you can use a nozzle-pump.

A wide selection of different attachments, attachments and accessories makes the drill a versatile tool that is indispensable for repair work and other household needs. living conditions. It's simple and optimal solution, which will avoid the purchase of expensive specialized power tools.