Bird trills delight the soul, and gentle swaying soothes. Garden swing on summer cottage needed not only by children, but also by adults. Moreover, it is absolutely not necessary to buy the same type of model covered with fabric. It is much more interesting to create an original designer item yourself. How to make a garden swing with your own hands? What is better to choose for the frame, metal or wood? Tips from experienced craftsmen, drawings, a selection of photos and video instructions are in this review.
Homemade swings and their classification
As a child, it seems that the “winged swing” can reach the sun. Growing up, we remember this wonderful feeling of carelessness. And subconsciously we want to repeat it. This is quite possible, because swings are not only for children:
- family. They look like a bench with a high back, suspended on strong supports by chains;
- mobile swings can be moved to another place if necessary;
- the hammock is the ultimate champion for relaxation;
- swing-gazebo. Suitable for several people to relax;
- balancer or pendulum. A floor structure in the form of a log, throwing itself on one side or the other, depending on the weight of the players;
- swings - sofas. Soft construction with the ability to implement the most daring design solutions;
- swings - “boats”.
According to the manufacturing method, swings are divided into:
- frame;
- frameless.
By installation method:
- stationary;
- portable - easy to remove and put away in another place.
The frame can be made from a number of materials and their combinations:
- plastic and fabric;
- tires and chains or ropes;
- wood and chains;
- rounded and non-cylindered beams;
- metal.
Choosing the right option
Before you begin construction, you need to decide on the purpose of use and the material of manufacture. If a child under 3 years old needs a swing, then a purchased or homemade stationary, stable option is suitable. For children over 5 years old - lightweight plastic or wooden hanging swing. They can be attached to the beam of an awning in front of the house or to a strong tree branch. A noisy group of children will appreciate the entertainment in the form of a balance beam (pendulum).
Attention! Products made from processed wood and metal are considered the most durable. To “winter”, it is enough to cover them with polyethylene. Purchased swings with a plastic base covered with fabric must be disassembled for the winter and stored in a dry, warm room.
If you want your garden swing to serve not only as a place to relax, but also as an accent piece landscape design, then you can prefer noble forging or wood eco-design.
For the older generation, durable benches with a high back and canopy are ideal. For noisy young people - swinging sofas with a lot of colorful pillows or hammocks for relaxing with a book.
Original design from a car tire
A swing that any beginner can make from scrap materials. To make it you will need a car tire, a strong rope and the ability to tie sea knots.
Installation steps:
- Drill four holes in the tire. 2 on each side.
- Insert a rope into two holes located nearby and tie it firmly at the bottom, under the tire.
- On the second side repeat the same steps.
- Choose a suitable tree branch or any other crossbar. Hang the improvised swing on the beam. The main thing is strong components that ensure safe swinging.
Such installation will not take much time, but will bring children a lot of joy.
Children's entertainment made from board and rope
The easiest swing to make, which does not require special skills and materials, is a beam suspended on a rope.
Attention! A wooden swing without a back is unstable, so it is recommended to build it for children over 7 years old. If you want a swing with a back, you can cut off the legs wooden chair and attach it with a rope to the base and back.
For installation you will need:
- edged or unedged board 3-4 cm thick and 15-20 cm wide;
- strong rope;
- antiseptic, varnish;
- hacksaw or saw.
Step by step guide:
- Cut a piece of board to the required length.
- Sand until smooth.
- Cover with antiseptic and varnish.
- Cut 2 grooves along the long sides of the board closer to the corners.
- Make 2 more cuts on both sides about 3 cm from the corners.
- Thread the rope from groove to groove with three “stitches”.
- Attach the rope to any cross bar.
The fastening feature guarantees the strength of the structure. The rope will not come undone or fray at the bottom.
Making family swings from wood and metal
An evening conversation on a regularly swaying bench promotes mutual understanding. And if you decorate wooden frame nice pillows then comfortable stay guaranteed!
Advice. The thickness of the slats for the seat of the swing bench should be greater than for the backrest.
Before construction you need to prepare everything you need:
- 15 pine or spruce boards 10x25x2500 mm;
- 1 board 150x50x2500 mm;
- chain, equal to length swing;
- 40 self-tapping screws size 80x4.5;
- 200 self-tapping screws 51x3.5;
- 6 carbines;
- 2 screws with rings 12x100;
- 2 screws with rings 12x80;
- drill, jigsaw, circular saw, hammer, plane.
Action plan:
- Cut boards 1.5 m long.
- Cut 6 shaped parts for the base of the bench from the thickest board.
- Having arranged 6 parts in 1 row, attach wooden planks to them with self-tapping screws. The plank should be fastened first at the ends, then in the middle. It will take 17 boards for the seat and 15 for the back.
- Make two armrests and the remaining wood.
- Attach a screw with a ring to the bottom of the armrest.
- Attach the finished swing to any crossbar. If it is not there, then you can dig 2 beams into the ground, concrete them and connect them with a transverse board.
- Attach 2 more rings to the top crossbar.
- Stretch the chain and hang the swing.
A properly constructed structure will be solid and reliable, and will last for several seasons.
Sturdy base for any type of seat
You might want to hang a swing bench or a couple of children's rungs from boards on chains. The main thing is to mount a reliable base that can withstand both a small load and several adults.
For construction work the following elements are required:
- beams 100x100 mm;
- boards for constructing a base and canopy;
- concrete;
- self-tapping screws;
- hammer, hacksaw, drill, tape measure.
Advice. The part of the beams intended for burial in the ground should be treated with bitumen varnish or resin.
Step by step instructions:
- Determine the location for the swing. This stage is important because the design is not portable.
- Dig 4 holes, 1 m deep each.
- Place the beams in the holes so that they cross at the top, resembling the letter “l”.
- Fill the base with concrete.
- Fasten the beams with self-tapping screws at the intersection points at the top.
- Knock down wooden flooring from half the slats.
- The second half consists of a canopy with a horizontal crossbar and jibs that strengthen the structure.
- Finish the finished frame with varnish.
Any type of swing can be attached to such a base using rings, a carabiner and a chain.
What to choose, chain or rope?
The safety of the swing directly depends on the type of suspension. Rope is a fairly strong option, especially if secured with maritime hub. But over time it can stretch out or fray. Therefore, such a suspension is recommended only for children's swings that are not subject to heavy loads.
Attention! The optimal rope is a nylon rope with a cross lay of 24 mm or more.
The chain is a more durable option that can withstand increased load.
Pros of using a metal chain:
- strong;
- the weakening of the ring is immediately visible;
- optimal for weak swinging.
- When mounted on bearings, it swings very strongly. This means that it is necessary to install a swing speed limiter;
- In large rings, babies can get their fingers pinched.
A garden swing is not just a place to relax, but also an original “highlight” of any site. A rational choice of design, construction taking into account all the nuances and careful care will ensure a “long life” for the swing.
DIY garden swing - video
DIY garden swing - photo
Garden swings are great fun, leisure and casual play. There is always a lot of joy and children's laughter around them. By placing them on the site, you will get another place for a pleasant pastime. This is especially true for young parents. Following simple safety and design rules, make a children's swing with your own hands.
Children's outdoor play has an indispensable attribute - a garden swing. With some effort and creative ingenuity, adults can create a fairy-tale element from them magic garden. After all, childhood is a time of miracles and fantastic discoveries! It is not at all necessary to buy large play complexes or entertainment areas. You can quickly do it yourself simple design, and as a result, the child enjoys the rocking, and you enjoy the sonorous laughter of children!
Most DIY outdoor frames are made for just one child. Let's highlight the types according to the main parameters:
Body position
A do-it-yourself wooden structure, for example, can provide two positions - sitting or standing. The first option is suitable for kids preschool age and, as a rule, it is additionally equipped with a backrest and a fastening between the legs at the front. Otherwise, the risk for the child to fall out increases.
Children's metal swing, on which you can stand, are more designed for teenagers. In this case side mounts not needed. The child stands with his feet on the board and holds on to the rope ropes with his hands. In addition, wooden children's hand holders must be attached across them.
Mounting method
There are two ways to make a swing for a baby - hanging and frame. The simplest one is to hang the finished board from the top support point. It can be located either without a canopy or under it.
Homemade frames require you to first build a seat, which is then hung on it in advance. installed supports. This process is more labor-intensive and time-consuming, but these garden swings are reliable and durable. And the photos confirm this.
Preparation process
Safety
For a child of any age, safety is main criterion. Make sure there are no solids nearby vertical supports or buildings that can be hit. Children's hanging swings require a covering of sand or soft grass at the bottom. As a last resort - from wood, if this is the floor of the veranda. Place them so that your child is in full view.
When choosing a material, consider its lightness and safety. After all, children's wooden swings, like any other, are used intensively, so there is always a risk of injury. To lower it, install the back, side and front fastenings. They are a must if you plan to ride small children under 7 years old.
For fastening, choose ropes; they will not heat up and you cannot stick your fingers in them. Regularly check the integrity of all parts, including those made from wood yourself. Lubricate children's metal swings.
A quiet place that calms you down after hard work, relieves stress and lifts your spirits - aesthetically...
Planning (installation location and drawing)
What is more important to you - a plot or a garden swing? If it’s a garden, then choose a free area, away from buildings and flower beds. It can be fenced off from the rest of the site with a low fence or border. In this case, a suitable space may well be in the depths of the garden, out of sight. Outdoor swing for children in such a place will be unsafe.
Do-it-yourself children's swings made from different materials may require a little restructuring. It may be necessary to empty the veranda by removing everything unnecessary, heavy and fragile from it. Or cut down an old tree that threatens to fall with rotten branches during the next heavy rainfall.
It is advisable to make the area next to the house with a canopy or under a tree with a wide crown. When children are frolicking in the yard in the summer, take care to provide shelter over their heads from the scorching heat. sun rays. It’s good if it’s a veranda or pergola, for more details about the manufacture of which, see. Children's swings for the dacha are installed taking into account the swing radius, so there should be free space nearby.
To understand how to make a children's swing at the dacha with your own hands, first sketch the design on paper. Choose the required form. Below you can see typical drawings and options that describe in detail the process of creating a swing for children and teenagers.
Tools
Garden swings and accessories for them depend on the material.
As standard you will need:
- Roulette and ruler.
- Pencil or chalk for marks.
- Nails, self-tapping screws, nuts, galvanized bolts, screws.
- Garden auger, shovel.
- Cement, sand, crushed stone.
- Primer and paint.
Wooden children's structures will also require:
- Saw, jigsaws.
- Metal corners for fastening.
- Chain or rope for hanging the seat.
- Hammer, drill.
- Glazing antiseptic.
When creating a swing with your own hands from metal, you need to have the following:
- Hacksaw for metal.
- Bulgarian.
- Welding machine.
- Chains, carbines.
- Pipes, angles and strips the right size.
For tires, you can limit yourself to fastenings and chains or use a strong rope. It is suspended from the upper support.
Do-it-yourself hanging swings made of plastic can be made from similar materials. Most often they are hung by ropes or ropes.
If the main material is fabric from which a seat for a children's swing is made, then you will also need small wooden beams.
What material to choose and how to make it
Tree
It is warm, durable and can withstand frequent use. At the same time, it is light, swings well and does not hit the child too much when falling. By sanding the wooden seat, you can paint the garden swing in almost any color.
Good quality, suitable for general style landscape, a wooden swing on a summer cottage is a joy for children and for...
A children's swing made of wood with your own hands will be just the place where you can show maximum imagination, taking into account the preferences of the child himself. For example, build a standard structure for children on your own in the form of the letter “G” using curved wooden sticks, beams, vines, giving the shape of a revived fairy-tale person.
Or use a jigsaw to make the character you want from a finished log. Wooden child seats can be a simple plank attached to ropes. But the child will remember them forever, and he will enjoy spending time here. Especially if you combine such a design with a slide.
Experiment with your own wooden seat. In addition to a simple rectangular board with or without a back, you can build seat in the form of a circle, airplane, flower, horse. A regular chair without legs will also work.
Metal
For swings, this material is used less often, because it requires long processing and expended resources. And the finished structure, although more durable and static, is heavy in weight and dangerous. It is not recommended for children to install metal swings on their own, but they are suitable for older children.
It’s good if the children’s metal swing is covered soft material, pillow or rope. This will not only soften the blow, but will also prevent the hard parts from heating up excessively in the sun. To do this, you can install a canopy made of durable fabric or polycarbonate.
Tires
Just like tires, used tires provide adults with a rich field to work with their hands for their beloved child. This material is easy to process, and working with it will take you a minimum of time. Tires are cut with a hacksaw or a special knife to obtain different figures. By securing them with bolts and hanging them by hooks, we get economical option for the street with your own hands.
Consider the weight of the child, because such material may deteriorate faster. Children's swings made from tires are well suited for children of primary and secondary school age. But small child It will be unsafe on them, especially in structures without a backrest and additional fastenings. In addition, in the summer the rubber heats up and can rub delicate skin and contribute to the occurrence of diaper rash.
– very budget method entertain children and teenagers. They can be easily moved from one place to another and stored in a utility room for the winter.
Plastic, skateboard board
The finished plastic seat in the form of a chair or a rectangular board is secured with chains or a cable. The likelihood of injury from a collision with plastic is minimal. Such children's swings for the dacha require constant attention, because with temperature changes or the weight of the child, the material can crack.
How to make a swing yourself from a skateboard? Remove the wheels from it and attach the ropes. People swing on it while standing, holding with their hands the wooden crossbars, which also serve as additional support.
Fabric, twine
Durable fabric or tarpaulin is a godsend for those who like to do everything with their own hands. Fastenings, usually wooden, are attached to the sewn pieces of fabric. Such children's hanging swings are made in the form of a hammock, a cocoon with holes, a chair or a cone.
Children's swings for the dacha are perfect for kids. They quickly fall asleep in these soft bassinets. An older child can relax there with a book or player.
DIY children's swing made from a circle and ropes. They are also suspended by ropes, and the seat is a circle without a back. Its bottom consists of ropes woven in a circle or crosswise. Weaving can take a long time, but this option is convenient, safe and versatile. The swing is attached quite close to the ground, and the likelihood of injury when falling is reduced to almost zero. And the wide surface allows you to both sit on it and lie down.
Build a children's swing for your dacha with your own hands, involving the child if possible and turning the whole process into a game. This way you will get better good relationship with the baby, and your authority will grow in his eyes. Whatever result you get, it will remain a source of pride for both adults and children. Garden swings for children are touching memories for a long time!
Today there are a huge number of accessories designed for the garden. One of them is a garden swing, which will not only become an attractive element of landscape design, but also very useful design. Both children and adults love to swing on swings, because this activity calms, lifts the mood and has a positive effect on human health.
Which swing is best for a summer house?
For the construction of swings, only 3 types of materials are used - wood, metal and plastic. Each person decides for himself which one to use when making a swing for his own garden. To do this, it is necessary to study the advantages and disadvantages of different models.
Main features of wooden swings:
- practicality and versatility . Wood is a material from which you can build not only the usual single swings, but also cozy sofas with several seats;
- ecological cleanliness . Wood is of natural origin, so the material is absolutely safe for human health;
- harmonious combination with the landscape . A swing made of wood fits perfectly into any garden design. This advantage distinguishes the structures from their metal counterparts, which require appropriate design of the entire site;
- safety . Wood is considered a fairly soft material, which significantly reduces the number of injuries received. This is especially important if children will swing on the swing;
- ease of installation . Absolutely anyone who is at least a little familiar with construction work can make a wooden swing with their own hands;
- efficiency . The monetary costs will not be large, since the material itself is inexpensive.
Characteristics of metal swings:
- durability - This is perhaps the main advantage of such products. Metal is an eternal material that will not rot or break;
- reliability such a swing is undeniable. The material is characterized by hardness and stability;
- practicality . Metal is not afraid of exposure to negative factors environment, he is not afraid of rain, snowstorms, or ultraviolet radiation;
- low cash costs . Compared to wood high quality, then the metal will cost less;
- variety of models . Swings made of metal can be dismountable, welded or forged. Every consumer can always choose suitable option specifically for your site;
- metal swing are able to decorate any plot or garden with their original look , however, designs require appropriate stylistic design, otherwise they will not look very harmonious;
- garden swing made of metal you can do it yourself , but this will require appropriate skills and abilities.
Metal swings have many positive characteristics, however, they also have some disadvantages. For example, the dense structure and hardness of the material is good, but only on the one hand, on the other hand, the possibility of receiving various blows and injuries increases significantly. To prevent the metal from rusting, it is necessary to periodically coat it with a layer of special paint. In addition, many people believe that metal swings are inferior to wooden swings in terms of aesthetic features.
Pros and cons of plastic swings
As for plastic swings, experts find more disadvantages than advantages in them. Such children's swings for the dacha are distinguished by their low cost and a variety of colors. Among the disadvantages are:
- plastic designs do everything design decoration garden plot cheaper;
- Such swings are suitable only for children, but teenagers and adults will not be able to use them;
- harmful fumes are perhaps the most significant disadvantage of the material. IN hot weather The plastic heats up and releases toxic substances into the air that can cause negative impact on children's health. For this reason it is better from plastic structures refuse altogether.
Types of garden swing designs
In addition to classification by material, garden swings can be divided according to the method of fastening the moving part of the product:
- horizontal swing - such models are probably familiar to every person since childhood. The structures are long crossbars that have a fulcrum in the middle. In order to swing on such a swing, you need two kids with approximately the same weight;
- swing with vertical suspension intended for individual use. Among such structures there are many various types: from simple bungees to solid original sofas and benches.
Swings also differ in location, and they can be placed either as part of an entire play complex for children, or stand or hang separately.
Showing your imagination, you can combine these two features in any way you like, resulting in amazing designs. For example, sofas suspended on chains, as well as circular swings resembling gazebos, are especially popular today.
No less important is the classification by size:
- product for the whole family . As a rule, they look like a bench with a comfortable high back. Several people can swing on such a swing at the same time;
- children's products with mandatory fastening belt. Such swings can be different: include a seat and a suspension, or have seats in the form of armchairs, etc.;
- portable models Convenient and mobile, they can be positioned wherever needed.
How to make a wooden swing with your own hands?
If desired, you can make a wooden swing with your own hands. It is necessary to decide in advance on the material, design and purpose. In order to decide what appearance the product will have, you can look at photos of wooden swings on the Internet.
To work you will need:
- wooden beams 100x100 or 50x100 mm. It doesn’t matter if the structure turns out to be massive, but you won’t have to doubt its strength;
- boards needed to construct the seat. The footage of the wooden parts is calculated in accordance with the drawing of the wooden swing;
- chain or strong ropes and carabiner;
- concrete mortar;
- nails and screws;
- metal corners.
The tools you will need are a hacksaw, a hammer, a drill, a tape measure and a screwdriver. After everything is prepared, you can begin the main process of work, which consists of the following steps:
- Making a load-bearing support
Initially, a lower frame is constructed on which the vertical bars. The dimensions of the bars are set in accordance with the dimensions of the seat future design. All these measurements are recorded in the drawing of a wooden swing. The most optimal dimensions will be the following: depth - 60 cm and length - 180 cm. The frame must be slightly wider than the seat, about 50 cm. This condition is necessary for better stability and reliability of the entire structure.
After all the materials have been measured and prepared, you can begin to fasten the beams with metal corners. When making and installing a garden swing from wood with your own hands, you must also take into account the type of surface on which the structure will stand. If the swing is mounted on open ground without asphalt and concrete, then the beams from which the lower frame is made must be covered with bitumen. This composition will reliably protect the wood from rotting.
At the highest points, the lateral supports are shaped isosceles triangles They are connected by a crossbar from which the seat is suspended. We lay out the lower part of the support, the swing platform, with boards. The side supports are installed at an angle to each other in pre-prepared holes. The supports are filled with concrete mortar. The transverse beams are mounted. The ends of the beams are treated with resin or bitumen varnish. The crossbars are fixed with metal corners on self-tapping screws. Between the side “L” - shaped racks the crossbar is installed and attached to them with large nails through clamps Support structure ready
After the frame is ready, vertical bars are mounted on it, which will play a role support pillars. Installation is carried out using self-tapping screws and metal corners. The end result will be a pair of triangles; a horizontal crossbar should be secured to their tops.
- Seat manufacturing
First you need to assemble a frame from bars. In total, you will need two such frames: one for the seat, the second for the back. Plywood or slats are attached to these frames - it all depends on which option suits you best. The seat is also connected to the back by corners.
Experts recommend leaving an angle of 120 degrees between the seat and backrest - this is the angle that will be optimal and most comfortable for sitting. Another element for additional comfort will be armrests, but they are not required.
Seat design diagram Seat mounting options for swing Wooden seat
- Fastening
Hooks or staples are attached to the top crossbar. A chain or cable is passed through the holes in them. Their length is calculated so that a person sitting on a swing can reach the ground with his toes.
After this, the seat is attached. If desired, the design can be supplemented with an awning. To do this, you should build a frame from beams, and then stretch any waterproof fabric over it.
All joints are fixed with metal corners. Powerful screws are screwed into the crossbar for attaching chains. Lastly, the seat is attached to the crossbar. Ready-made swing for a summer cottage
A wooden seat will be hard, so it is recommended to place a couple of cushions on it for comfort. For long service life For such accessories, it is better to make covers that can be updated or removed for cleaning at any time.
If you were wondering how to make a reliable wooden swing with your own hands, then you already know the answer.
Video instructions
How to make a swing from metal?
You can make a metal garden swing with your own hands, without the help of specialists. To do this you will need the following materials:
- 9 metal pipes with the same diameter;
- 8 corners;
- two metal arcs with a diameter of 16 mm and a length of 25 cm;
- 2 wooden elements;
- a couple of pieces of furniture foam rubber and 2 zippers;
- cable.
The tools you will need are a welding machine, as well as metal paint.
DIY metal swing - diagram Metal swing diagram Hook fastening diagram
Stages of making a swing:
- Preparatory work. This stage is very important, since it is at this moment that all calculations are carried out, and then a drawing of a metal swing is created.
- Making a support. Based on the calculations carried out, a drawing is created that will help you make a garden swing from metal with your own hands. The pipes are prepared for welding: the rust is removed from them, the required length is measured, and a chamfer is removed from both sides at the joints at an angle of 45 degrees.
Based on the intended diagram of the swing, it is necessary to weld the pipes. When the support is ready, arches are attached to the upper part, on which the swing will then be mounted. The structure is coated with special metal paint.
The pillars are mounted into the ground. There are 2 bearings on the crossbar. Grooves into which the crossbar fits.
We must not forget that the practicality and aesthetic appearance of the future product will depend on the professionalism of the welder. For this reason, you should not start work if you are not confident in your abilities; entrust this task to specialists.
- Creating a seat. Segments metal corner welded according to the previously planned garden swing pattern. Seat inserts are cut from wooden canvas, and then they are inserted into ready-made metal rectangles. For sitting, you can sew soft mattresses that will become a comfortable addition to the entire structure.
Seat parameters Back parameters Required places for welding metal parts Finished seat design
- Installation of swings on supports. For reliability, you should use either special fasteners or a strong rope. It is important to secure the rope well so that it stays in one place; this is done using fasteners.
Mounting the seat on a pre-prepared support Fastening on a chain It is important to pay attention to the strength of the fastenings - bolts and chains. It is possible to fasten the seat to the main structure using a carabiner. Fastening the seat to the support
- Installation of the structure. It is best if the swing is under a canopy or in a shaded place. Metal structure will be stationary, since its weight does not allow the swing to be moved.
Features of making children's swings in the country
When building a structure intended for children, some important nuances should be taken into account:
- the swing should be as strong and stable as possible;
- It is mandatory for children to have seat belts and special guards on swings;
- when making a swing, you should take into account the height and weight of the child;
- it is very important that the baby has the opportunity to reach his toes to the ground and stand up independently;
- all materials used to create the structure must be environmentally friendly, safe and hygienic.
All these conditions must be taken into account when building a children's swing for the dacha with your own hands, because only in this case can you be completely confident in the safety of your child.
How to make a swing from tires?
The swing can be made of wood or metal, however, if you want to simplify the task using available materials, then ordinary tires are quite suitable. You can attach such a product to a tree branch or place it near any body of water.
The advantages of such a design include ease of manufacture, cost-effectiveness, as well as new sensations that every person who uses such an invention will feel. In addition, to make a garden swing from tires with your own hands, you do not need any drawings or diagrams.
Stages of making a swing:
- First you need to install two pillars, which can be wooden or metal. It is very important that the posts are strong enough to withstand all expected loads.
- A crossbar is mounted into the upper part of the beams, and bolts with rings are cut into it, into which a rope or chain is threaded.
- At the bottom, the rope will be attached directly to the tire itself.
Take an old tire without serious damage Wash the tire thoroughly inside and out with a cleaning solution Purchase three medium-diameter U-bolts Drill six holes (two at equal distances from each other) for the chosen fasteners Bolt holes Check in advance that the holes for the bolts are drilled correctly bolts Paint the tire with spray paint of the desired shade and let it dry thoroughly Now place the bolts in the holes and secure with washers inside The result will be a design like this. For the upper part of the swing you will need a strong chain with fastenings. To create reliable design you will need four U-shaped fasteners. To each of the bolts in the tire you need to attach a fastener with a chain. On the other side, connect the chains using one fastener. Secure the two ends of a small chain intended for attaching a carabiner there. You can hang the swing in any place convenient for you!
When creating a swing from a tire, it is necessary to take into account the mass of each element, since if used wooden poles Their tensile strength is important. In general, this design is more suitable for adults or older children, but not for toddlers. For greater reliability, it is recommended to use a metal chain rather than a rope as fastenings.
Now you know how to make a garden swing with your own hands, all that remains is to choose the most suitable design and materials, and you can get to work.
Reading time ≈ 10 minutes
How nice it is to sit on a bench after a long day at work. And it’s even more pleasant to relax on a garden swing, which will give you gentle rocking and soothing coolness. Unfortunately, it is not always possible to buy such a design. After all, the cost of such swings is high, often exorbitant. Therefore, let's talk about how to build gardens to enjoy a pleasant stay in the fresh air.
Beautiful garden swing in the country
The undeniable advantages of garden swings. Varieties
At the dacha or in the yard country house garden swings are an indispensable attribute of landscape design. Besides wonderful place for relaxation they perform many functions:
- resting on them, you will easily gather your strength;
- calm the nervous system;
- beautiful design helps transform the entire yard;
- a convenient place to work on a laptop or read books;
- You can nap on them during the day (especially for children);
- suitable for pleasant tea drinking and conversations with a glass of wine;
- Children are helped to train and develop the vestibular apparatus.
As you can see, the advantages are really huge. Therefore, it is logical that their popularity is so high among the population. The design, in fact, is not very complicated, so even a beginner in construction can build such a swing at home.
Another advantage of building your own is that it will fully comply with your wishes. You can decorate or decorate it yourself, choose a special shape and size. The main thing is to follow the instructions during construction, then everything will definitely work out.
Before you start making a garden swing, you need to consider what they are. For example, for purpose:
- for children;
- for adults;
- for the whole family.
Depending on the location there are:
- stationary swing;
- mobile swing. They are convenient because you don’t need to be tied to a specific place. You can easily and quickly move it to another area.
If we talk about the main materials used, the swings are:
- made of wood;
- made of metal.
The design can also be very different.
Hanging.
This option is simple. All you need to create such a swing is a crossbar, a high-strength rope and a seat (it is better to choose one with a backrest).
Hanging garden swing
Frame.
Often used for children. They are strong and stable and easy to move. So at any time you can move the swing to the shade or another place you like.
Frame garden swing
Crafting on a tree requires crafting a seat. Everything else is as simple as shelling pears. After all, making a frame in in this case no need. After constructing the structure, it must be secured to a tree (make sure that the branch you use is strong) or a beam. For fastening, a cross-stranded rope with a diameter of at least 24 mm is suitable (especially for swings on which children will ride).
You can replace the rope with a chain suspension. This will make the entire structure much stronger. To prevent the chain links from harming children (fingers can get caught in the links), you need to place it in suitable size plastic pipes. As an option, you can take a chain canopy with a small caliber. It is worth noting that to install a frame garden swing, you should choose the right place on the site, avoiding trees and various types of fences.
Choosing the right support
A support for a swing is not just a structural element, but its main component. The safety of being on the swing and the permissible amount of swinging will depend on its strength. Most often, the material used to make the support is wooden beams, metal pipes and corners. For a summer house, a support in the shape of the letter A is often sufficient. For this, a frame is built from two supporting elements. They connect with each other cross beam, which is installed horizontally. Its placement occurs at the level of one third of the column above ground level.
The crossbar itself, on which the seat is then hung, must be mounted to the racks, which are located vertically. Use bolts for fastening.
Important: metal swings must be fixed in the soil. Because in the process of swinging, the “leg” of the pipes becomes loose and turns out of the ground. To prevent this, support frames are created. As an alternative, concreting can be done in the trench.
But to secure the wooden structure more firmly, you need to bury the “legs” of the garden swing to a considerable depth (at least one meter). You can also fill it with concrete mortar. But before concreting it is necessary to carry out preparatory work. Apply to the support bitumen mastic so that the “legs” are well soaked. This will protect the wood from rotting processes. Bricks are laid at the bottom of the pit.
Video: DIY metal garden swing
DIY construction of a metal garden swing
Metal is a durable material and is heavy enough to ensure that the entire structure of the garden swing is strong and stable. This choice is ideal for building a swing that teenagers and adults will ride on. Also metal base will be more wear-resistant to heavy loads.
Metal garden swing
Be sure to use a drawing to ensure the entire installation is done correctly. Therefore, further presented step by step instructions so that you can build a garden swing with your own hands from metal (drawings and dimensions, photos will be given below) in your dacha. Of course, options are selected individually. And in the photo we show only one of the possible ones.
Drawing of a garden swing made of metal
The construction of this installation begins with the preparation of materials:
- cut the pipes according to the required dimensions;
- burrs and sharp protrusions should be removed using sandpaper.
- Form the base. To do this, the supporting elements must be fastened at an angle of 45 degrees. Then install the crossbar. It should be strictly perpendicular to the racks themselves. At this stage, you should use a welding machine to connect all the elements as firmly as possible.
- It is necessary to make recesses to secure the support. Pour sand into the bottom and compact it well. Then install the support and pour over it concrete mortar. The entire structure is left for at least a week so that the solution dries well and sets.
- Once the filling has dried, you can begin attaching the seat. Before installing it, you need to use welding machine weld special hooks. The seat itself is hung on ropes (high strength) or on metal beams.
- The final stage is painting all the elements of the garden swing. This measure is necessary not only to give the design an attractive appearance. By painting it, you will protect your creation from rust and corrosion. It's also possible various decorations to your taste and imagination.
Ready-made garden swing made of metal
If you feel that this option is not within your power, then you can stop at a simpler copy of it. In this case, you need to stock up on a regular metal profile (diameter 50 mm).
Drawing of a simple model of a metal swing
Attach special metal brackets to the drain (transversely). To do this, use bearings and a welding machine.
Install the seat on the hangers and attach it to the structure itself. Most often you can find metal rods or chains as suspensions.
A simple version of a metal swing
The creation of exclusive models looks original and attracts the attention of others. It could be forged products or a swing made from channels, or rather from their scraps. Self-made swing benches look interesting.
Wrought iron garden swing
Wooden swing
They are especially popular. After all, wood is always popular as a building material. Building a garden swing with your own hands from wood is as easy as making it from metal. Drawings and dimensions, photos from the Internet will help you. You just need to use suitable projects, then you will get perfect result, and the photo of the homemade product is proof of this.
DIY wooden garden swing
Such designs have their advantages:
- naturalness and environmental friendliness;
- presentable and original appearance;
- strength (in case of impregnation with specialized solutions and substances).
Drawing of a garden swing made of wood
The most suitable tree species are birch, spruce or pine. For construction you will need:
- wooden pole – 2 pcs.;
- crossbar;
- rope - about six meters;
- hooks or suitable hangers;
- elements for fastening the structure ( ideal option use of bolts).
If you have wooden beam, That excellent option there will be a swing on four pillars. But this design requires some attention and effort.
- First you need to make a support. Two parts of the beams need to be assembled in the shape of the letter A, as shown in the photo.
- After this, you need to secure the crossbar.
- In order for the installation to be as strong and reliable as possible, you need to use short bars.
- From the same beams you need either a seat. And don't forget about the backrest for maximum comfort.
Beautiful garden swing
Construction of a children's garden swing
The process of building a swing for children is similar to the construction of an adult version. We need a detailed design diagram, drawing the dimensions and locations of elements for fastening. When using drawings for adults, be sure to optimize it for children.
- It is necessary to make racks. They must be the same size.
- The racks are installed at a distance that directly depends on the width of the future seat.
- Both supports should be connected with a crossbar.
- Particular attention should be paid to the reliability of connections. To do this, you need to measure as accurately as possible the angle at which the elements of the racks, which are located vertically, will connect.
- You also need to ensure that the crossbar itself is equally distant from the ground level.
- Before installation, you need to dig a trench. A special cushion of crushed stone is created in it. Supports are also installed there. After installation, everything is filled with concrete.
- The entire structure is polished; the corners also need to be rounded. This is necessary in order to make the swing safe for children.
Children's swing
Your dacha will sparkle with new colors when such a swing made by on our own. It is not only useful, but also incredibly beautiful.
Fastening system
There are various systems fastenings for garden swings, namely:
- carbine - made from the following types: with rectangular cross-section(designed for beams) and with round(for bars);
- anchor - type of fastening passes through;
- staples and hooks - intended for children's models;
- clamps – needed for fixation in case of hanging the swing on cables.
Therefore, carefully study the features of each system. After all right choice fasteners allows you to make the swing not only durable, but also reliable.
Rope swing
The most classic models are rope and log swings. This option is considered the easiest to manufacture. To implement such an idea, you will only need to make four holes. Use a wide log as a base. You need to thread a rope into the holes made.
Rope garden swing
Using the same ropes, you need to put on the seat board. But you need to be careful. This option is not entirely sustainable. To prevent the seat from flipping over, make four holes on the side and thread ropes through them.
The ends of the rope must be tightened well and tied with strong knots. And the swing is ready to use.
Today, DIY garden swings make a chic and unforgettable impression. You just need a little patience and attention. What kind of swing will it be? Metal frame or wood mobile? It's up to you to decide, but the swing should definitely be fun. And see all the most interesting things about building a garden swing yourself in the video that you will find below.
Video: wooden swing
Holidays with children can be made even more enjoyable by providing interesting elements and structures.
This is both a barbecue area and playground or a whole complex.
In this article we will look at the manufacture and assembly wooden swing for the dacha, drawings and photos various options structures.
Drawings
Advantages in self-production structures weight:
- choosing a design that is comfortable and functional according to your own taste and desire;
- a product made from natural wood is environmentally friendly and durable (with appropriate processing);
- saving money (purchasing a finished product is always higher, and there is not always a guarantee of quality);
- the tree will fit harmoniously into the setting, and the canopy over the structure will allow you to enjoy the measured swaying and fresh air without the risk of getting burned under the scorching heat.
Did you know?In Ecuador, in the city of Banos, there is a swing, riding on which brave tourists can soar over an abyss more than 2000 m deep and admire the view of the Tungurahua volcano.
We adjust the board to the required dimensions, place them on a straight surface (on the floor) in the position in which they will be assembled, measure the width of the base and the angle at the top of the future rack. In the upper part, two racks will be fastened together with a cross beam. Therefore, the angle is measured, taking this detail into account; the easiest way to take measurements for cutting off excess wood is to apply a short block of the same width to the parts of the supports folded together, and draw a marking line with a pencil.
Use a jigsaw to cut off the excess parts and assemble all the parts together. Secure with a clamp for complete immobility and make sure that the bottom of the rack is not warped, a level will come in handy here, remove excess.
Make the second stand in the same way.
A board of the desired size can be made rounded along the edges protruding from the fastening for aesthetics.
Next, we assemble the support: before screwing in the bolts or screws, make sure that all the corners of the structure correspond to the calculations.
The rack is not ready yet: it will need additional side bars for reliability. We try on a beam of suitable length to the bottom of the rack, the distance from the floor corresponds to the level of the future hanging bench.
Mark the cut lines with a pencil, making sure there are no distortions using a level. Install the prepared cross member in the desired location, secure it with a clamp and fasten it with bolts.
In the same way, make and install crossbars in top corner the posts are approximately 20 cm below the mounting point. We add fasteners at the top for final fixation - the base of the swing is ready.
Important! Remember, all fasteners must be galvanized: this will protect the wood from cracks and extend the life of the wooden product.
Bench
Let's move on to the bench. In order not to miss anything when making a swing for the dacha with your own hands, check the diagrams and drawings. Make frame parts for the bench of the desired size, grind and sand them, mark and cut grooves in the right places. Don't forget about armrests, they can be made curly.
Then the frame needs to be assembled and secured with a clamp (one tool is not enough here) in order to more accurately calculate the width and length of the back and seat parts. Start making bench parts for a wooden swing, it’s not difficult to make them yourself, the main thing is to take accurate measurements.
Two long parts with a groove machined lengthwise (for lamellas) and tenons at the ends. A thin strip, narrowed on one side (to match the width of the groove) and equal in width to two bases, will be needed during assembly to close the groove recess between the slats. Cut the plank into pieces equal to the width of the gap between the slats. Next make lamellas, depending on the length of your bench, there will be from 10 to 12 of them on the back, located perpendicular to the bases, do not forget to sharpen the tenons on both ends for the grooves made in the bases.
For the seat, make slats that are longer than the length of the bench; they will be located parallel to the longer bases of the seat. The number of slats also corresponds to the width of the seat.
All the parts are ready, start assembling the bench.
Assemble the back: install one of the bases with the groove up, mark the location of the lamellas with a pencil. Lubricate the groove with a stamp and install all the lamellas one by one, and then the choppers that cover the gaps between them. Also secure the top base with glue and secure the assembled back with clamps.
Next, assemble, coat all the grooves with glue, and fasten the frame for the bench with bolts. Place the prepared backrest on the frame, coat the tenons going into the grooves of the two side frame guides with glue.
Grind, sand, fix the seat slats with glue and press with a clamp.
The DIY wooden swing is almost ready, all that remains is to install the suspension and canopy.