How effective is a diesel heat gun. Diesel fuel heat gun: principle of operation, review of the best models and reviews The main characteristics of the equipment

If you need to heat a workshop (workshop, garage, change house, hangar), or you cannot continue repairs in winter due to low temperatures and high humidity in the building, or your car when severe frosts does not start, then thermal diesel guns will become an indispensable thing in this matter.

Essentially, a heat gun is heat generator for space heating. In it, the air flow is heated by the combustion of liquid fuel. It consists of a cylinder with a built-in fan, pump, nozzle and burner. At the very bottom is the fuel tank. The principle of operation of a diesel heat gun is simple:

• from the tank, with the help of a pump, fuel enters the nozzle;
• a combustible mixture begins to spread from the nozzle under pressure;
• fuel ignites in the chamber;
• the fan pumps air through the cylinder;
• at the exit we get a jet of very heated air.

heat gun on the diesel fuel there are 2 types:

1. Heat generator direct heating.
2. Heat generator of indirect heating.

Direct heating heat generator

The diesel heat gun of direct heating is not equipped with a chimney and has the simplest design. Therefore, once-through heaters are inexpensive, compact, easy to use and reliable. The fuel is ignited using a spark plug, in some models - from electrical arrester. The heated air stream, together with the exhaust gases, enters the building that needs to be heated.

The use of such a heater is possible only in non-residential buildings with a good ventilation system or on construction sites (open).

Device shown below diesel plant direct method heating.

Indirect heat generator

A diesel heat gun of indirect heating is used in all cases, as a direct-flow one. But due to the fact that gases are vented to the outside, the range of its application is significantly expanded:

• in construction;
• agriculture;
• in production shops;
• for drying plaster (putty) in the cold season;
• concrete heating;
• drying facades during facing works;
• for heating trenches;
• heating of greenhouses, farms in animal husbandry;
• home heating, etc.

The design of diesel heat guns with exhaust gases contains closed cell, in which fuel burns, and a chimney. The fuel is supplied under pressure to the nozzle, in the chamber it is sprayed in the form of an aerosol and ignites. Air is blown into the unit by a fan. To maintain the combustion process through the holes located at the back, part of the air enters the chamber. The rest of the flow moves between the casing of the heater and the combustion chamber, where it is heated. The smoke leaves the chamber through the chimney and is discharged outside, bypassing the room.

The use of such diesel heat guns is allowed for heating garages, rooms with people in them, pavilions. But during the operation of the heater, oxygen burns out, so you need to ensure ventilation to compensate for his loss.

A liquid fuel heat gun can also be multi-fuel. This means that the unit is able to operate on waste oil, gasoline, diesel fuel, kerosene. Often this kind of heaters are used in places with a sufficient amount of oil products and their waste. It can be: fuel depots, car parks or car services. At the same time, the problem of fuel and lubricants waste disposal is solved and heating is obtained free.

The figure below shows the operation of a multi-fuel generator.

Diesel infrared guns

The liquid-fuel infrared heat gun heats large rooms with high efficiency and at the same time efficiency. It can also be successfully applied to outdoors. This type of heat generator heats the objects themselves, towards which it is directed. Air heating comes from objects heated by the rays, and the height of the ceilings in the room does not play a significant role. These features result in significant fuel savings.

Using this property, it is convenient to heat up objects in the open air pointwise.

How to choose a heat gun

Before choosing a heat gun, there are a few important things to consider.

Most heat guns have a handle temperature control, with which you can adjust the operation of the unit to a predetermined temperature in the room, after which it turns off. The device does not turn on if the temperature on the display is lower than in the room. Also, diesel heaters are equipped with protective system from overheating.

How is heat gun power calculated?

The thermal power of the device is calculated by the formula: V * T * K = kcal / h, where:

• V is the volume of the room (width * length * height), in m3;
• T is the difference between the temperature outside and in the room, in degrees Celsius;
• K is the coefficient of thermal dissipation.

For different types premises, the values ​​of the coefficient are set:

• from 3.0 to 4.0 - a room in which thermal insulation is not provided, for example, a structure made of wood or sheet metal;
• from 2.0 to 2.9 - a room with poor thermal insulation. A simple building with one brick masonry;
• from 1.0 to 1.9 - a building with middle level thermal insulation (laying in 2 bricks and several windows, standard roof);
• from 0.6 to 0.9 - building with thermal insulation High Quality. brick building double insulated. Double glazing on windows. The base under the floor is of sufficient thickness. On the roof, for insulation, high quality material is used.

An example of calculating the power of a thermal diesel gun:

• V = 150 m3;
• T = 29°C ( outdoor temperature-10°С, required indoors +19°С, the difference will be - +29°С);
• K = 2 (one-brick building);

We substitute the data into the formula: 150 * 29 * 2 = 8700 kcal / h, despite the fact that 1 kWh = 860 kcal / h. So: 8700/860 = 10.116 kWh. Thus, we learned that to heat this building, a liquid fuel heat gun with a minimum power of 10 kWh is required. It is recommended to buy a unit with some power reserve.

Advantages of diesel heat generators

When using diesel heat guns, there are several positive points:

• excellent performance characteristics;
• ease of maintenance;
• power can reach up to 230 kW;
• very low fuel consumption;
• battery life more than 10 hours;
• works well at low temperatures;
• the ability to quickly heat large areas.

Based on the above positive points, it is safe to say that the heat gun is the most effective device for heating residential and industrial premises.

Which have sufficient technical potential to maintain a comfortable temperature. If you need to work in a cold, unheated room, then there is an excellent option for creating normal conditions in the form of a device such as a solar heat gun.

An important advantage diesel unit to keep warm is high performance and long service life without additional refueling. In principle, these are the same fan heaters, and the device is provided a heating element which is reliably protected from external influences.

How do solar heat guns work?

The interior quickly reaches the right temperature if operated with suitable technical parameters. This device traditionally consists of:

• heating element,
• safety element,
• fan,
• Corps,
• fuel tank.

If you follow the safety precautions, a diesel fuel heat gun allows you to warm up rooms of various sizes in a short time. Diesel fuel burns in the unit, the air is filled with thermal energy, and then the fan heater comes into operation, capable of driving air masses through the heating zone.

It is necessary to choose such units in which an effective output of diesel fuel combustion products is provided. Otherwise, the use of such devices can be detrimental to the room in which the equipment is located. It is necessary to create a safe design with the forced removal of harmful fumes that appear during the operation of this technique.

indirect heating

Thus, the purchased Aurora diesel gun must have necessary characteristics optimally suited to the specific conditions.

If the equipment is indirectly heated, then it is best to use it in, since in similar units a special pipe is provided that removes exhaust gases. It is enough to fix an additional hose to the branch pipe and ensure its outlet to the street so that there is no harmful effect of fumes.

Wherein thermal energy will be almost in full be kept in the garage. This device with indirect heating it is preferable to gas units, which do not always have enough safety equipment to remove harmful elements. In addition, during operation, it is necessary to ensure ventilation of the room, which leads to significant heat loss.

Direct heating units

You need to know how to convert a direct-heated diesel gun in order to avoid mistakes when choosing equipment. Still, such designs are most suitable for rooms in which people spend a minimum amount of time. The operation of such a heat gun is to mix the products of combustion of diesel fuel and air, which leads to a rapid accumulation harmful substances in space. If a person stays in such conditions for a long time, it will lead to negative consequences.

When choosing, it is necessary to carefully study the parameters specified by the manufacturers in order to exclude the negative impact of the equipment on the human body.

For units with direct heating, spacious storage rooms are suitable, different kinds construction and finishing works where rapid surface heating is required. Such a device will be useful if it is not possible to connect to electricity.

Infrared thermal equipment

There is also an electric diesel heat gun, which creates desired temperature due to the heating of all kinds of surfaces in the room, and air masses this process does not concern. Such devices do not provide a fan heater, so the principle of operation is somewhat different from other models of diesel guns.

Residents of private houses are wondering how to create economical heating private house? AT winter time buildings cool down quickly and need a heating system. Today there are many...

In the conditions of our cold winter we can not do without space heating. Often needs to be warmed up separate sections premises or create conditions for working outdoors in frost. Solving the problem of heating buildings under construction, garages, warehouses will help the use of special equipment for heating high power - heat guns. One of the advantages of these powerful fan heaters is their high mobility, they can be easily transported to the right place.

Principle of operation

The heat gun is a powerful air heater. Works just like a regular household heater. The heating element, located in the body of the gun, heats up itself and heats the air flow passing through it. The output is a very powerful jet warm air. Hence the name of the unit - a heat gun.

At the same time, the heat transfer process occurs almost instantly, which allows you to heat the air in the room very quickly.

Manufacturers produce models that run on different types fuel. On the market are:

• diesel fueled units
• on kerosene
• on liquefied gas
• electric heat guns.

Diesel heat guns of direct heating are often used in construction. For example, with a device stretch ceilings mobile heat gun is indispensable. Heat guns can be used when you need to quickly dry the surface

Diesel heat guns

Diesel heat guns are the most popular. This is primarily due to the availability of the fuel used - diesel fuel. Naturally, when diesel fuel is burned, combustion products are released.

With this in mind, there are two main types of diesel fuel heat guns on the market. They differ from each other in the way the exhaust gases are removed:

• diesel guns of direct heating, in which the heated air is discharged directly into the room
• guns of indirect heating. The design of the unit provides for the removal of exhaust gases outside the premises.

The price of the unit directly depends on the design of the heat gun, in other words, on the method of heating the air flow. If it's about diesel guns, then direct-heated guns are about half the price. This design has its pros and cons.

Heat guns of direct heating

The principle of operation of a direct heating diesel heat gun is simple. A powerful fan with an electric motor is located in the unit case. From the fuel tank, fuel is pumped into the combustion chamber by means of a pump. Since the burner is inside the housing, open fire while not. In view of this, heat guns can be used indoors.

When burned, diesel fuel heats the air flow coming from the fan. The heated air flow passes through a special screen and is directed to the object that you want to heat. At the same time, waste products of combustion, the same exhaust gases, dust, soot are discharged together with the air flow into the heated zone.

Therefore, direct heating diesel heat guns can be used in well-ventilated rooms, semi-open rooms or outdoors.

Most often, such units are used if necessary to perform one-time work. For example, in winter, a car engine froze in frost, warmed it up with a cannon, repaired it and drove off. Or in construction industry to speed up the process. The builders completed, for example, a screed, and warmed up the room with a heat gun for fast drying. It is important that people do not stay indoors for a long time during the operation of the unit, so as not to be poisoned by combustion products.

If you are faced with the task of heating a room in which people stay for a long time, you should choose an indirect heat gun.

Heat guns of indirect heating

The device of a diesel heat gun of indirect heating is a little more complicated. In such designs, a special chamber is added - a heat exchanger. Fuel is supplied from the fuel tank to the combustion chamber, while the combustion products of diesel fuel do not mix with the air flow from the fan, but are discharged through the chimney to the outside. The task of the user is only to organize the output chimney from indoors to outdoors.

During the operation of the gun, the heat exchanger heats up itself and heats the air that drives the fan. A heated, and at the same time free from combustion products, air stream comes out of the nozzle of the heat gun. Such units can give an outlet temperature of 50 to 110⁰С.

Heat guns of indirect heating can be used in rooms with working people without restrictions, exhaust gases will not enter the room.

combustion chamber in modern models Made from high strength stainless steel. To protect against overheating, the guns are equipped with thermostats that automatically reduce the intensity of the flame when overheated. The outer casing of the unit does not heat up at all.

By the way, an additional thermostat installed in the room can be additionally connected to the device. In this case, the heat gun will be able to automatically maintain the set temperature in the room. And the unit itself can work up to 16 hours without stopping.

In order to warm up large area, the kit includes flexible hoses - corrugations made of durable material with a diameter of 300-600 mm. With the help of corrugations, you can direct the warm air flow to the right place for organizing local heating.

With the help of heat guns of indirect heating, you can easily solve the problem of heating shops, stalls, warehouses, car washes and exhibition centers.

Infrared diesel heat gun

There is another type of guns that run on diesel fuel. These are infrared heat guns. The design of these units does not include a fan heater. These heaters work on a different principle.

Infrared heaters do not heat the air masses in the room, like the fan heaters we are used to, but objects that fall into the field of infrared radiation. In turn, objects heat the air through heat exchange.

In construction infrared gun using a burner with diesel fuel is heated infrared emitter. He, in turn, heats objects and surfaces in the room, it remains only to direct in the right direction.

The absence of a fan can be attributed to positive moment of this unit. After all, fans work, making noise, and infrared heat guns are almost silent.

How to calculate the power of a heat gun

As you can see, the scope of a diesel heat gun directly depends on the principle of operation. to someone suitable option with direct heating, but for some, these models will be unacceptable.

There is another factor influencing the choice of model is its power. AT different models it varies from 20 to 220 kW. In fact, if your task is to purchase an air heater for mounting stretch ceilings, it makes no sense for you to purchase a unit increased power, after all, his fuel consumption will be many times greater.

In order to determine the choice of model, you need to calculate the required power of the unit. To do this, you need to know the volume of the room. Recall that the volume is easy to calculate, knowing its dimensions - the length, width and height of the walls. In addition, you need to know the degree of thermal insulation of the room, it is indicated by the coefficient of thermal insulation.

The coefficient of thermal insulation is different for:

• uninsulated rooms from wooden structures or metal sheets(for example, a metal shell garage). K warm = 3.0-4.0
• uninsulated brick rooms with a single brickwork, single windows, non-insulated roof (for example, country house). K warm = 2.0-2.9
• standard brick buildings with conventional thermal insulation, such as a standard residential building. K warm = 1.0-1.9
• buildings with improved thermal insulation. K heat = 0.6-0.9

To calculate the power, you need to know the temperature difference between the outside and inside the room.

The power of the unit is calculated as follows: the volume of the room is multiplied by the temperature difference and multiplied by the thermal insulation coefficient.

For an uninsulated warehouse, we take the thermal insulation coefficient equal to 2. Well, suppose that the temperature outside the window is -5⁰С, and we need +16⁰С (the minimum allowable at the workplace). The temperature difference turned out to be 21⁰.

We calculate the required power. 300*21*2=12600 kcal/hour. To convert to the usual kW, divide the value by 860. We get

12600 /860=14.7 kW.

This means that to maintain the temperature in our warehouse at 16⁰, we need a heat gun with a capacity of at least 15 kW.

Diesel heat guns will good decision heating problems of any premises. Mobility and ease of operation, as well as the possibility of choosing a design depending on the purpose, make this heating equipment unrivaled. We hope our material will help you in choosing the right unit for you.

Maintaining heat inside the garage in winter becomes especially relevant if you need to mess with the car, so the heating system must be efficient and reliable. Solar heat guns do a good job with this job. They are sold in stores where you can buy tools, car parts, and much more of that kind. Diesel fuel heat guns are characterized by good performance, save the owner's money, and, if properly handled, do not pose any health hazard.

general characteristics

To understand the advantages of such equipment, you need to know what it is. Diesel heat gun works on simple principle, similar to that used in domestic fan heaters - the air is heated with its subsequent injection into the jet. When he finds himself in a cold surrounding space, hot streams give their energy to the masses of cold air. This cycle continues until there is a complete heating of all inner space to the optimum temperature.

Device

Diesel fuel heat guns are equipped with a reliable metal housing designed to protect the heating element and supercharger from damage or penetration of objects that can ignite and cause a fire.

The design necessarily includes a safety element that turns off the system in case of overheating. Therefore, solar heat guns can be safely turned on to warm up the room in which you are doing something, and at the same time do not worry much. However, no one canceled the observance of safety precautions.

Principle of operation

Diesel fuel heat guns, prices for which start at 3,500 rubles, consist of several basic elements: a fan that drives air through the heater, a heating element, and a housing in which everything is placed. This description is quite general, but there is no need to understand the intricacies of the device of such equipment for those who use it. If a person's profession is the repair of heat guns, then this is another matter.

So, everything is clear with the device, and with the principle of operation, everything is not much more complicated here. Due to the combustion of fuel, the air is enriched with heat. It is driven by a fan through the heating zone. And how exactly the air is heated, and allows us to divide the guns into two categories.

Types of heat guns

Speaking about safety, many may think, but where do they go, because diesel fuel burns out and forms certain substances that need to be removed. All these compounds are quite dangerous for human health, so it is important to take care of their diversion. And then it's time to talk about the fact that there are two types of heat guns on diesel fuel: direct and indirect heating. Each of these species has its own character traits, features and possibilities for use.

Thermal indirect heating is well suited for the garage. This design assumes the presence of a branch pipe - it is designed to remove exhaust gases. A hose is attached to it, which can later be taken outside. This will not lead to any significant heat loss, however, harmful carbon monoxide, as well as other substances that are hazardous to health. That is why the diesel heat gun is perceived by many as the best option compared to gas models. Many gas-powered appliances do not have this method of venting combustion products, so you will need to open the garage for ventilation, which will cause significant loss of precious heat.

Direct heat gun

This option is not suitable for rooms in which there are people, since the products of combustion of diesel fuel are mixed with hot air and accumulate in the room. Therefore, the choice should be based on the most thorough study of information about the device. If you need a heat gun, the instructions for which indicate the impossibility of using it in a room where people are, then you should think about it before buying it.

Scope of application

Solar heat guns can be found in many places. They are usually used for heating, during the installation of stretch ceilings to speed up the heating process of the film, and also wherever there is a need for mobile devices that can quickly and not too expensively heat rooms of different sizes.

The most widespread heat guns, reviews of which from users are mostly positive, were received as heating devices. storage facilities, construction halls, as well as other places where heating is required, but the use of traditional equipment is difficult or impossible for any reason. In particular, such devices become relevant for buildings in which there is no direct connection to electrical networks. The operation of a heat gun also requires a certain flow. electrical energy, but not so much is needed, so a small portable generator is quite capable of coping with such a task.

Special types

Heat guns on diesel fuel that use deserve special attention. This type of equipment heats the room without the use of a fan, while the air temperature does not rise due to its direct heating. Like all infrared heaters, such a gun heats planes and objects, and not the air masses inside the room. heating element here, as in all other cases, it works by burning fuel, but without involving a fan. This makes such a device completely silent during operation, which adds certain advantages to it.

Operating rules

The basic requirements for the use of equipment differ depending on which type of instrument is used. If we are talking about a gun with direct heating, then it is required high-quality ventilation heated zone. Most often, thermal units are used for local heating of rooms with good ventilation or semi-closed type. For heaters that use indirect heat transfer, there are no such stringent requirements, since a chimney can be used to remove combustion products.

Solar heat guns are increasingly used in the installation of stretch coatings in rooms. The operation of such units requires minimum flow fuel, which significantly reduces costs. In this case, the requirements for the organization of the operation of the device require the organization of the removal of exhaust gases, which, as mentioned above, is done very simply.

Advantages

The price of a heat gun can be from 3500 rubles (depending on the power and manufacturer), and its upper limit is not limited. Such heaters are able to work not only on diesel fuel, but also on kerosene or waste oil. Thanks to small additions to the design, such fuel can also be used, as a result of which the efficiency of the equipment increases several times.

The main advantage of such devices is their mobility. They weigh quite a bit, and their bulk is a fuel tank, the dimensions of which depend on the power of the device. Thanks to this, you can easily transport equipment and install it in different places.

Pretty big the lineup allows you to pick up suitable option to solve any problems. The maximum efficiency of the heat gun is ensured even with its minimum size, while maintenance costs can hardly be called significant.

This becomes quite relevant in those moments when you need to quickly and very strongly warm up the room in which repair work. In particular, when installing stretch ceilings. With the help of a gun, the air is heated to the required temperature. Due to the highest mobility of such a heater, it can be brought into the room without any difficulties, and then removed from there. For this, there is no need to attract additional personnel, everything is done by the masters who carry out the direct installation of the coating.

Repair of heat guns is also not particularly difficult. These tasks require minimum set tools and basic knowledge in the field heating equipment operating on liquid fuel.

Advantages

Safety is a significant factor when choosing a heating device. For this setting gas guns far behind diesel ones, and electric ones require access to the power supply network. Therefore, it is the diesel option that can be considered optimal.

Reliability is an important parameter, and it is he who tells what is better in favor of such equipment. A diesel heat gun of indirect heating is practically not subject to breakdowns, and its repair is much easier than in the case of using gas units.

All these factors speak in favor of the fact that this is a reliable, economical and convenient equipment. The only thing that can overshadow the use of such heaters is the requirement for a gas outlet pipe or ventilation.

Conclusion

It is already clear what qualities heat guns have. Reviews of such equipment speak of maximum convenience and ease of use. All those who have had to use it testify that it is modern way quickly and efficiently heat up any room. Such devices are in particular demand among the masters of the repair of premises, since a number of operations are performed with their help. The price of a heat gun is quite affordable, so such a device pays off very quickly.

To ensure targeted heating, heat guns are most often used. Their feature is high power in the supply of air masses. certain temperature. This is due wide application this equipment in construction and industry. A properly selected diesel-fueled heat gun is capable of heating concrete, maintaining an optimal microclimate in the production room, and also protecting plants in the greenhouse from hypothermia in winter.

The principle of operation of heat guns

The organization of the working process in any heat gun provides for the possibility of activating the fan, which provides air supply. In this case, this task is realized due to the energy generated in the combustion chamber of diesel fuel. The design of the unit provides a tank for pouring diesel fuel or kerosene. Through a special filter, the mixture enters the sump, and then the pump pumps it into the nozzle for further use. Usually, a fan is located at the rear of the equipment, which supplies cold air masses to the combustion chamber, distributing diesel from the nozzle in it. Ultimately, the fuel is burned, and already hot masses are sent to the target object. This scheme builds general principle operation of a heat gun on diesel fuel, but there are some differences in the process depending on design features one model or another. At least, there are fundamental differences in the operation of two types of such installations - with direct and indirect heating. It is worth familiarizing yourself with these types of heat guns in more detail.

Types of heat guns

Models with direct heating are distinguished by the fact that during operation they emit a combustion product directly into the operating area - this can be, for example, production room or construction site. Modifications with indirect heating provide for the removal of combustion products outside the boundary of the working object. Obviously, direct heating has serious limitations in terms of use. In particular, such equipment cannot be used in residential areas. In exchange for this inconvenience, the user gets better performance.

In turn, an indirect heating diesel heat gun can also be used in rooms where people are located. Its design includes a mechanism for removing combustion products, which is joined to the chimney channel through a special pipe. That is, in the process of work, heat flows get rid of burning, spreading around the room or workshop in a relatively pure form. True, the operation of such models requires organization ventilation system indoors as the unit will process oxygen.

Main characteristics of the equipment

Among the main technical and operational parameters of heat guns, it is worth noting the power, the volume of delivered air and fuel consumption. As for power, this indicator is in the middle corridor from 10 to 80 kW. For residential premises, installations with a power potential of 15-25 kW are usually purchased. In industry, more productive units with a capacity of about 200 kW are used. In order to ensure future savings, one should also take into account the volume of the combustible mixture, due to which the thermal consumption fuel varies on average from 1 to 6 l/h. The higher the power, the more gluttonous the heat generator. Depending on the area of ​​\u200b\u200bthe room, the volume of warm masses that the installation will distribute is also selected. This figure can be both 200 and 3000 m 3 / h. For a living room, an installation with an initial volume value will suffice, while production facilities, warehouses and construction sites are serviced by high-performance heat guns.

Reviews of the BV 290E model from Master

This is one of the most popular units in which the possibility of removing combustion products is provided. Therefore, the bulk of the users of this model are private traders serving residential premises with a heat gun. Owners note quality work fuel filter, due to which the service life of the equipment was increased. At the same time, the heat generator has a considerable power potential of 81 kW, which makes it universal. In addition to residential premises, this has found application in agriculture and construction. According to the users of the installation, it effectively copes with the heating of building materials, while requiring low costs. According to the totality of operating parameters and financial investments it's a decent option in terms of multipurpose use.

Reviews of the Gryp 28 model from Sial

This model can also be classified as universal in operation, but it also has many successful design features that are highly appreciated by users. For example, many note the reliability of the stainless steel body and the stable function of the air atomized torch. In addition, the unit is provided with an integrated control board, which allows the unit to be used in automatic mode. This addition is especially significant if a diesel-fueled heat gun is designed for operation in a private house. In favor of this model as a solution for domestic use says the environmental friendliness of powder coating. Many owners also point to the ease of physical handling of the equipment. The unit can be equipped with an ergonomic trolley that simplifies its transportation.

Reviews of the model Mistral 85 H from Fubag

Fubag manufacturer is among recognized leaders in the segment of equipment intended for public utilities. The Mistral 85 H model in its line of heat guns is positioned as effective solution just for business purposes. The owners of this unit note the benefits of its use in construction activities, in the maintenance of greenhouse facilities, warehouses and sheds. The combination of the performance of this model and the presence of an exhaust gas system are especially distinguished. In other words, this is a diesel fuel heat gun, which has absorbed the advantages of household and industrial units of this type.

Reviews of the model Jumbo 200 M from Ballu

If you need a high-performance cannon, then you should contact the Jumbo 200 M from Italian manufacturer climate technology Ballu. This heat generator focused on servicing large areas. According to the owners, the plant dries warehouses, production halls, cellars, etc. in short periods of time. Of course, if necessary, the equipment can also be used as a heating system. It is important to note the reliability of the model. The point is that the most frequent malfunctions diesel fuel heat guns are connected with a burner and a fan. The designers have improved the strength characteristics of these parts, so there is practically no criticism regarding the reliability of the Jumbo 200 M installation. In addition to this, many emphasize the benefits of safety and limiting thermostats, which increase the safety of equipment operation.

How to choose the best option?

It is necessary to take into account not only the nature of the intended use, but also the dimensions and the need for availability. additional features. You can build on the power potential and performance indicators. This will help to determine the principle of operation of the gun - with or without the withdrawal of spent combustion products. In accordance with the dimensions of the room, the dimensions that a diesel-fuelled heat gun can have are determined. It is not difficult to install this unit with your own hands, but in the case of models that provide exhaust gases, it may be necessary to additionally equip the structure with pipes and chimney adapters. It will also not be superfluous to calculate in advance the need for electronic control systems with heat gun control.

Most heat generators operate in intensive mode, which increases the value technical measures for their service. The main concern of the user is to clean and replace the filters regularly. In particular, the air filter element, which filters out fibers and fluff, should be replaced every 500 hours of operation. As a rule, it changes at the end of each season. In order to avoid the need to run on diesel fuel in terms of power stuffing, you should regularly take care of the fan. In a contaminated state, it complicates the workflow, which increases the load on the generator. Therefore, the fan should be cleaned at least once a season.

Conclusion

In most cases, heat guns are massive structures, while having an impressive weight. Despite this, such equipment is quite practical in operation and performs its tasks without any problems. Indeed, depending on structural design diesel-fueled heat guns may place special demands on the place of use. This mainly applies to models with indirect heating, the operation of which is possible only in rooms with organized ventilation. But also do not forget about the specifics of the use of units that directly emit combustion products into environment. It is desirable to use such models outdoors or in production workshops where the presence of harmful substances will not pose a danger.