Modern balcony blinds can be used instead of curtains or as an addition to curtains. Their design is such that they can transmit light in different positions of the plates or close the window tightly. This property is especially useful in the bedroom when you still want to sleep in the morning.
Photo No. 1 Through the horizontal slats you can look at the street
The control mechanism is simple, it consists of a cord that lifts the slats, a cane that turns them up or down for horizontal ones, and a cord and chain for vertical ones.
Balcony blinds are made from the following materials:
- plastic;
- aluminum;
- fabrics;
- bamboo;
- wood.
Photo 4. Bamboo lamellas.
Wooden. The most expensive, even if they are not made from precious woods. This is due to the difficulty of technological processing and fitting of the lamellas. Made from veneer valuable breeds wood, and there are no plastic parts in the control mechanism.
Photo 5. Wooden lamellas
Perfectly clean and easy to wipe off the dust. Wooden blinds in the apartment are a sign of the high status of the owner.
Two words about advantages and disadvantages
Advantages:
- easy to install;
- regulate the luminous flux;
- provide air circulation when the window is open;
- close windows from outsiders;
- easily fit into any interior;
- inexpensive.
They have one drawback: it is a continuous system connected by a special rope mechanism. In order to change one lamella, it is necessary to disassemble the entire structure.
Types of blinds designs
What designs are better for balcony blinds and how many use cases are there? There are few types of structures:
- horizontal;
- vertical.
In order to choose suitable blinds, you must first of all focus on the interior design of a balcony or loggia. Many residents remove the walls between the balcony or loggia, thereby increasing the area of the room. Horizontal blinds on the balcony are very compact and take up little space on the window. And made of plastic and aluminum are lightweight.
Tips:
- Remember not to install blinds directly on sliding windows or sliding doors. If they are installed, then neither the doors nor the windows will be able to open. For sliding windows, choose vertical types of structures with fastening to the wall.
- When buying vertical blinds choose one of three ways their openings: right to left, left to right or from the center to the sides.
There is some confusion about the definition of roller blinds and Roman blinds. In fact, neither Roman nor roller blinds for interior spaces does not exist. Roller and Roman curtains are available for interiors, consisting of one piece of material. The difference between them is in the way the fabric is laid. They are attached only to the window or door frame. But they have one drawback: the round body where the roll of material is hidden can be installed on all types of windows except for sliding ones. They are not too heavy and can be fixed with double-sided tape or installed on special brackets attached to window frame. They can also be used on a balcony or loggia.
Do you know that: vertical blinds do not make it opaque. Fabric materials transmit light to some extent.
Blind mounting options
Depending on the design features balcony or loggia blinds are attached to a window or door:
- inside the opening;
- outside the opening;
- directly to the frame.
The design is mounted on special metal brackets, which, in turn, are attached to the wall or ceiling with dowels.
Photo 6. Mounting options horizontal blinds
In all cases, the distance from the box to the blinds should be the same. To be able to freely open a window or door for ventilation.
Fastening vertical blinds to the ceiling or wall will depend on the distance between the slats and the window itself.
Photo 7. Calculation of the distance from the window to the lamella
Distance X depends on battery placement and stop valves. It must be calculated in such a way that the lamellas do not cling to the valve when opening and closing the blinds or under gusts of draft. Width vertical slats starts from 100 mm, so you need to step back from the wall by half the width (50 mm) plus 1–2 cm of margin so that the lamellas do not cling to the wall and do not rub against it.
Fastening to the frame can be done in two ways: with self-tapping screws directly to the window frame and on Double-sided tape. In both cases, fasten horizontal blinds without distortion. Since the window is checked vertically and horizontally during installation, it is necessary to focus on the horizontal edge of the frame.
Tips: When installing self-tapping screws on screws, you must first drill a hole so that the plastic box of the frame or window sash does not crack.
Double-sided tape will hold plastic or aluminum horizontal blinds, but this number will not work with wooden ones. They are much heavier, the control mechanism is made of iron parts in a metal case and requires fixing with screws .
Elite wood and bamboo blinds
Products from natural materials valued at all times. Blinds made of precious wood and bamboo become part of the interior of a balcony or room. The width of the lamellas made of wood or bamboo is 25 and 50 mm, and the thickness is about 2 mm. The rope system holds the lamellas one above the other and is installed in the eaves. It is made of metal, which, in turn, is covered with paints or laminated with a film to match the color of the wood of the lamellas. The control mechanism is identical to other horizontal blinds and allows you to lift and install the slats on desired height. And the second is to regulate the amount of sunlight entering the room. Fastening elite products is no different from fastening ordinary ones: with screws or double-sided tape, to a wall, ceiling or door or window frame.
How to choose blinds
Before buying blinds, you need to measure the window and opening directly. Having decided on the method of fastening, choose the width of the slats less than the window or doorway by 1.5–2 cm and more by 3–4 cm for window glass or flush with the frame. Choose a color for the interior. The fact is that the blinds will become the central place where a person’s gaze will be constantly directed. When choosing a solid color or lamella color, it is best to use the color combination table. Don't reinvent the wheel, everything has already been invented.
There are many color combination tables and everyone can choose the most suitable for themselves. suitable option. It is necessary to decide on the role of a balcony or loggia. If the balcony is planned for relaxation, it is necessary to select calm color combinations.
Conclusions and some considerations
Blinds on a loggia or a balcony for shading a room from the direct rays of the Sun are certainly a useful thing. Decide on suitable type, color, measure the opening and, armed with knowledge, go to the store.
Advice: draw on paper the dimensions of the opening, the window frame so as not to make a mistake in choosing the blinds in size.
Blinds to the balcony optimal solution to create a cozy and modern loggia. A wide variety of such curtains allows you to find perfect option for a specific interior. Narrow, wide, smooth, textured, with or without a pattern, made of various materials and by the most different prices- variety will please the hostesses. Finding an elegant design today is quite easy thanks to huge selection models and manufacturers.
Features and Benefits
A huge plus of blinds: they do not lose their relevance over time and look organic in any room. Previously, they were used as sun protection in offices and cafes, today they are widely used. They are practical, look neat, easy to use. This design is a long lamella connected in one row, the rotation of which is regulated using a simple mechanism.
Lamels are arranged horizontally or vertically, depending on their type. Blinds are similar to curtains, but more practical and functional. They do not crumple, quickly and easily cleaned. Vertical models are impregnated special solution that repels dust and dirt. The design is easily adjustable: the slats can be fully closed, opened or the level of lighting on the balcony can be adjusted as desired.
If the plates are closed, then this does not interfere with air circulation and protects the room from prying eyes. The design allows you to freely open the window for ventilation. Regardless of the type, blinds are easy to install yourself. A large selection of shapes, textures, colors refers to the advantages of the design. Models are attached to window opening, on the ceiling, against the wall.
Despite the objective advantages (protection against sun rays, aesthetics), they have their drawbacks. Plastic models turn yellow over time in the sun, deteriorate, disintegrate. If they are actively used, the mechanism quickly fails. Budget slats can bend, break, sag.
Kinds
Blinds are divided into types according to two criteria - the materials of manufacture and the location of the slats.
Horizontal. The most budget option. Most often, this type of construction is installed on a window with balcony door or on balcony frames separately for each double-glazed window. Horizontal models are simple and consist of a cornice with an adjustment mechanism, lamellas, and a cord for control. They are fixed with a strap attached from below.
The horizontal model is convenient if there are flower pots on the windowsills. The design does not take up much space, looks weightless, does not overlap with space window openings. Lamels reliably protect from the sun, dust. Horizontal models are easily cleaned with a soapy solution, dry quickly. During washing, you can not wet the eaves, otherwise the mechanism will quickly become unusable.
Vertical. The structure is made of aluminum or plastic cornice, vertical slats connected by a chain with runners, weights and a control cord. The slats rotate around their axis, and if they are opened, they are assembled like an accordion. Vertical blinds can be 3 meters, 6 meters high, depending on the window parameters.
They open in several ways: from right to left, from left to right, from the center in both directions. The design is mounted on the ceiling or wall. Lamellas can be made of plastic, fabric, aluminum, be different shades and flowers. For balconies, designers advise using models with drawings that give the interior atmosphere and comfort.
AT closed vertical models are similar to curtains, so they are ideal for decorating balconies. Among the shortcomings: they take up space, it is easy to damage the lamellas, sometimes it becomes difficult to open windows.
Roll. Outwardly, they resemble curtains, since they do not consist of individual strips. Roller blinds are solid. They consist of a thin roller, on which the canvas is wound, and a mechanism with a chain for control. Models are closed, have an additional box, 2 shafts, 2 slats.
They protect the fabric from sagging and wrinkling. Curtains are attached to the frame, wall, ceiling. They are made from materials of different densities. Some models are transparent and transmit light well, diversified and multi-colored.
Pleated. Blinds are horizontal, but differ from the classic ones. The design is metallic profile(plastic), between which the pleated fabric is fixed. The model is controlled by a cord or chain. When closed, they do not let in light, they are attached to the glass contour, window opening or frame.
The design is great for non-standard window openings. They look spectacular and stylish on the loggia. Plisse transform even the simplest interior.
colors
Thanks to modern technologies production and great choice models, shapes and colors of blinds, the buyer can choose the most good option for a specific balcony interior. Today, color models (rainbow), gradient, tricolor have appeared on the market. most popular and classic color in the style of minimalism - white.
photos
Black structures are a spectacular, but heavy option for a balcony. Designers advise to pay attention to soft, rich shades: color sea wave, green, chocolate, peach. The color depends on the model and material, as well as the general situation on the loggia.
How to choose
Length balcony blinds should be less than the window frame by five to ten centimeters. When choosing a specific model, pay attention to the mechanism. It should not make creaking sounds, but function smoothly without causing discomfort. Most the best option for a plastic frame - vertical fabric models. They perfectly cover a window of any size and easily adjust the level of lighting.
On the loggia it is better to choose spectacular models, colored, with a pattern. Ideal for sliding windows vertical structures. When choosing blinds, remember that they should not reach the floor.
When choosing a design, pay attention to the material. Ideally, the cornice should be made of aluminum, not plastic. A high-quality chain connecting the vertical lamellas is white, without a yellowish tint. Blind design is one of the main criteria right choice. The interior of the balcony will depend on the color, style, pattern. Perfect Colors for the loggia: white, milky, beige or bright, mysterious, but not gloomy.
How to choose?
Use the following tips:
- Sliding windows with aluminum frames will not fit models that are mounted on sashes.
- Vertical designs are suitable for sliding windows on the balcony.
- On the windows of the loggias located on the south side, rolled models made of dense material are ideal, and for the north side - vertical ones with thin lamellas.
- Bamboo or wooden structures are suitable for balconies decorated in ethnic style and chalets. The style of minimalism corresponds to laconic plastic models.
- If the loggia is used as a place to relax, it is wiser to choose light-colored fabric blinds.
- Window small balcony it is better to arrange horizontal structures that are mounted on glass.
materials
The price, design, durability, ease of installation, operation and many other factors depend on the material of construction.
metal structures are strong and durable, well cleaned from dust, do not deteriorate under the influence of sunlight, are not afraid of moisture. Minus iron models- rattle when opening / closing, have a simple design, fade over time.
Plastic easy to use, these are inexpensive models, not heavy in weight, not afraid of moisture. White lamellas turn yellow over time, crack, break, and the mechanism often fails.
Wooden. They look expensive and look impressive. The wooden structure does not fade in the sun, does not dry out. The disadvantage of wooden lamellas is that they are heavy, which leads to sagging and problems with the mechanism.
Fabric. Practical blinds, light, practically do not fade in the sun, do not deform, are suitable for different interiors and design styles.
Bamboo. Strong and durable constructions. Look original and exotic. Such models are expensive, so they are rarely used for decorating loggias.
Thread. Fashionable blinds that have an original design. The slats are made of threads without weights and lower fixation. With the help of the mechanism, the structure is easy to shift to the side, rotate. These vertical models are suitable for decorating balconies with panoramic windows.
How to install yourself
It is not difficult to install the structure on the balcony windows on your own. First, decide on the method of mounting the model and take measurements. Remember that they must be accurate. Roller and horizontal blinds are mounted with or without drilling. Installation of vertical is made only by drilling. Next, decide where the structure will be located: on the wall, in the window opening or on the glass.
Before hanging the structure, prepare necessary tools. For installation you will need: an electric drill with a drill for concrete from six mm, self-tapping screws and dowels, a simple pencil, ruler, level, tape measure, screwdriver, screwdriver.
- Check the complete set of the structure, lay out all the details on the table. The kit should include universal fasteners, screws and shutters.
- Attach the structure to the wall or ceiling, mark the mounting location on the left and right with a pencil. Use a level and ruler to determine the exact installation location. From each mark you need to step back two centimeters and also mark the place for fasteners with a pencil.
- Attach the left and right fasteners to the marks, mark the drilling points for the screws. Drill the marks with a drill. The depth should be no more than four centimeters.
- Screw the brackets with self-tapping screws to the wall, window frame or ceiling.
- When installing blinds with a width of more than two meters, install intermediate fasteners.
- Insert the structure into the upper cornice and close the locks of the brackets.
- If the horizontal model is mounted in a window opening, use the following mounting tips.
- As in the previous installation recommendation, check the contents of the blinds. It should include two brackets, screws and an assembled structure.
- Try on the curtains to the window opening and check if the design interferes with opening and closing the window.
- Attach the right and left fasteners to the upper inner part of the window opening, step back from the wall two centimeters to the center, make marks at the holes. Thus, there should be two labels on the right and left.
- The drill needs to make holes according to the marks, their depth should be three to four centimeters.
- Screw the left and right fasteners to the top of the window opening with self-tapping screws.
- Insert the blinds into the upper eaves and close the locks.
- The vertical design requires effort during installation, but it is also possible to make it yourself. It all depends on the length and height of the model.
A balcony or loggia has long ceased to be a warehouse of unnecessary things, but a full-fledged living space. Considerable attention is paid to design, and modern balcony blinds have become an integral part of the interior.
Installation of blinds on the loggia
The device of any blinds is complex structure, and during installation it is necessary to strictly follow all the rules. Exact stepping manufacturer's recommendations will not take much time and effort.
In total, there are several ways to install blinds on the loggia:
- into the window opening;
- overlay;
- on the window sill.
The installation option is selected depending on the characteristics of the window itself and the type of fastening of the blinds.
Before starting the installation, it is necessary to carefully perform all measurements.
It is worth paying attention, when choosing the installation option in a window opening, you will have to retreat two centimeters on each side. It's about the height difference. Such a measure will not allow the blinds to touch the window sill too much, that is, to actually lie on it.
The choice of the “overlay” option involves, when ordering blinds of a certain size, adding five extra centimeters on each side. The height of the structure is determined independently. Blinds can reach or touch the floor.
To mount the blinds in each sash, you need to take a construction tape measure and accurately measure the window width. This takes into account the following factor: the fittings should not interfere with the free opening of the blinds.
Accurate measurements - will allow any design to function properly. This applies even to non-standard windows. However, in the latter case, one has to individual order in order to fit the blinds as much as possible to the size of the window.
Before starting work, you must prepare the following tools:
- pencil or marker;
- construction meter;
- electric drill;
- fixture.
In the process of marking, it must be taken into account that the design of the blinds should not interfere with the opening and closing of the window. On the side where the cord for controlling the blinds is located, according to the rules, an additional mount is installed. This is necessary to reduce the load.
When marking is done, the blinds are applied to the window. It is advisable not to perform the installation alone, this will be fraught with a number of difficulties. It is worth doing all the work together with a partner.
Next, we mark with a marker or pencil the place where a hole for hardware fasteners - dowels or screws will be drilled in the near future. Fasteners are installed using electric drill. Then the shutter mechanism is mounted.
The last stage is a thorough check of the functioning of the mechanism. If the fasteners were installed correctly, then the structure will work exactly as intended. Otherwise, the work will have to be redone.
There are several varieties of blinds, from which you can choose what you really like. Or what seems to be the most suitable for the interior. But before you decide on one or another type of design, you need to consider several factors.
Window blocks and the door leading to the loggia often open.
It is advisable to choose blinds colors that will not be too easily soiled. You should always prioritize blind materials that can be easily removed, washed and cleaned.
Therefore, fasteners must be as strong as possible. It is desirable to stop the choice on blinds made of fabric, paper or polymeric materials. They make significantly less noise than metal and wooden options.
For example, on aluminum frames do not install horizontal blinds. The reason for this lies in the features of fastening such models. They must be mounted directly to the sash.
If the main goal of installing blinds on a loggia is aesthetic appeal, it is best to focus on a variety called "pleated" (we will discuss them specifically later). As practice has shown, such blinds look best on large windows.
Note: If in ordinary rooms you can choose vertical blinds made of aluminum or fabric, then for a loggia the best option will be polymer material plastic that does not fade in the sun.
Horizontal
As for horizontal curtains, it is desirable that a professional be engaged in their installation, if there are plastic windows. Blinds of this type are fixed on the casement windows or close to the walls.
Photo gallery:
Pleated
Pleated pleats are very practical and at the same time beautiful option. In today's market, you can choose from a range of configurations to give your interior a sophisticated look.
Like vertical designs, pleated blinds make it possible to regulate the amount of color and heat entering the room. During installation, no cassette connection is required.
The main advantage of this type of blinds is the ability to install on any type of windows.
Rolled
Roller blinds are ideal for installation on plastic window structures. Roller blinds are deservedly considered the most durable, since the system of folding the material allows you to put it in a special box.
The curtain moves very easily and precisely along the guides, so it is not able to sway. When closed, roller blinds adhere very tightly to the glass, which prevents the curtain from deforming and wearing out over time.
Photo:
Like vertical blinds, roller blinds are optimal for installation on loggias or balconies. At the same time, the design is easy to install both on the window frame and on the door itself. Installation can be done by hand without the help of specialists.
Choosing blinds is based on the material used in their production. There are blinds from:
- tree;
- fabrics;
- plastic;
- metal;
- paper.
Main plus wooden blinds - it's aesthetically pleasing appearance. Blinds are perfectly combined with any interiors. Wooden structures very easy to use and environmentally friendly.
Fabric blinds for the loggia are different high rates not only practicality, but also durability. Special impregnation and processing prevents the blinds from fading in the sun. Another plus is the almost unlimited choice of colors.
Plastic slats for loggias and balconies are very common. They are easy to install and do not require much maintenance. But if you choose cheap option, blinds will quickly lose their visual appeal, turning yellow or cracking.
Metal blinds are chosen for installation on the loggia quite rarely. They do not tolerate temperature extremes and precipitation. They should only be installed if the balcony is used infrequently.
Paper blinds for balconies are very functional. It is better to install them in the form of a roll system or pleated, which were mentioned above.
Blinds deserve a separate paragraph of our article. There is a problem with sliding curtains that work on the "coupe" principle. Due to the fact that the sashes fit tightly to each other, the blinds cannot be installed at a minimum distance from the window.
It is worth immediately discarding the option with blinds, the design of which is intended for classic version plastic windows.
The exit exists. This is the installation of vertical blinds, roller blinds or horizontal blinds. The latter should be located a short distance from the window. Installation of these structures will not be easy if suspended ceilings are installed on the loggia.
The best option is to attach the blinds to the "native" concrete ceiling.
It is necessary to think over the scheme of dividing the blinds into separate fragments. This is important, because only in this way it will be possible to freely open windows, and approach them, as well as directly adjust the blinds.
When working with roller blinds, you need to plan the dimensions so that their joints coincide with the frames, and not with the glass.
If the choice fell on horizontal blinds, then a centimeter gap is made between them. This measure will avoid deformation of the slats during the raising and lowering of the blinds, and during gusts of wind if the window is open.
Owners of apartments and houses with a balcony or loggia should think about the decent design of these areas, which are almost never used to store unnecessary things. This article will help you understand the features of such decorative items, like blinds on a balcony, will acquaint you with their classification, advantages and disadvantages. Publication contains short review existing species structures, as well as recommendations for their use on windows and doors of loggias and balconies with different type glazing.
Balcony windows without blinds look empty and uncomfortable. In addition, nothing prevents the penetration of sunlight into the house, which negatively affects the microclimate of residential premises. Of course, to protect the space from negative impact from the outside you can use curtains, but they are less convenient and practical than blinds.
The range of such structures is quite diverse. On sale you can find narrow and wide blinds with a smooth or textured surface. Some of them can be decorated with drawings. Manufacturers offer customers hundreds of options for products made from various materials. Therefore, before buying blinds, you should understand the features of these structures, their advantages and disadvantages.
The main types of blinds: classification by type of construction
Constructions modern blinds consist of canvases or lamellas, as well as a cornice. Various raw materials are used for the production of products.
Lamellas can be made from the following materials:
- wood;
- metal (aluminum);
- fabrics;
- plastic.
Note! The designs of modern blinds are not universal. picking up desired option for installation on a balcony, it is necessary to take into account not only its decoration, but also the configuration, as well as the type of glazing and other features.
Classification of products by type of construction:
- Horizontal blinds - the most popular type products for installation on balcony windows. Differ in a practicality, convenience and simple system of operation.
- Vertical - canvases or lamellas are placed vertically, which allows you to adjust the direction of the light flux that enters the balcony from the street.
- Rolled - more versatile than other product options, presented on the market in a large assortment.
- Facade or street blinds - installed with outer side building. They perform not only a decorative, but also a protective function.
- Roman - have excellent decorative characteristics are made from natural fabrics.
- Pleated - made from pleated fabric. The design is formed from folds 20 mm wide.
Each product type has own characteristics, advantages and disadvantages that must be taken into account when choosing products.
Why is it profitable to buy blinds for a balcony: common advantages and disadvantages
The high popularity of blinds is due to large quantity Benefits of these products:
- used in production quality materials with a high margin of safety;
- the ability to create a comfortable environment;
- protection of space from prying eyes;
- simple cleaning system;
- Unlike ordinary curtains blinds on the balcony do not crumple and do not tear, they do not need ironing;
- dust-repellent surface (roll and vertical structures);
- the ability to control the level of natural light on the balcony;
- a large selection of colors and decorations;
- affordable cost.
Even when closed, the lamellas do not interfere natural circulation air. Opening a window for ventilation, you can not be afraid that the room will be viewed from the outside. Regardless of what material blinds are made of, these products can be easily installed by hand.
The disadvantages of blinds are not so many. Some types of products are expensive, for example, pleated. But this disadvantage is compensated by ease of care. Unlike other blinds, pleated blinds are washable.
Useful advice! If the balcony is on the sunny side of the building, it is advisable to use roll types products (minirollo).
Characteristics of the main types of blinds on the balcony: photo and review of designs
For balconies, rolled, horizontal, vertical types of structures, as well as pleated, are considered optimal. Each type of product has certain properties and characteristics that must be taken into account when choosing blinds.
When choosing a product in a store, you should pay attention to the quality of the rotary mechanism. Its moving components should move freely, without creaking or extraneous sounds. It is necessary that the parts of a high-quality swivel mechanism work smoothly, only in this case, daily operation will be comfortable.
Features of horizontal blinds on the doors and windows of balconies
Horizontal structures are the most budget option products for balconies. In most cases, these blinds are compact in size. Their installation is carried out on balcony frames, and the products are fixed separately on each double-glazed window.
The design of horizontal blinds consists of the following components:
- lamellas;
- a cornice equipped with a built-in type regulating mechanism;
- mesh made of threads;
- control cord.
Some products have additional elements. They provide fixation of the lower bar, so that the blinds do not sway in strong gusts of wind when the windows are open. The advantage of horizontal structures is their compactness. Narrow and thin plates require a minimum of space, so that there is enough space on the windowsill for growing flowers. At the same time, the blinds protect the plants from the hot sun during the day.
The slats perfectly retain street dust, which is also one of the significant advantages of horizontal structures. To clean the product from contamination, it is enough to dip it in a soapy solution, then rinse thoroughly. clean water. This procedure does not require a large number time, and the lamellas dry out quickly.
Important! In the process of washing, it is strictly forbidden to wet the eaves of window blinds. In this zone there is a rotary mechanism, which fails when water enters. If this happens, you will have to buy new blinds, as they will be unusable.
Disadvantages of horizontal products:
- under the influence of ultraviolet light, the lamellae turn yellow;
- over time, cheap designs dry out;
- with regular use, the rotary mechanism quickly fails;
- with careless handling, the lamellas can be bent, after which they must be replaced.
Horizontal blinds, although they look neat, are not able to create a cozy atmosphere on the balcony. They are suitable exclusively for spaces decorated in a minimalist style.
Which blinds to choose for sliding windows on the balcony: pleated designs
Horizontal, cassette and roll types of products are not suitable for sliding windows. Although pleated blinds are classified as horizontal, their design has a different structure. It consists of a pair aluminum profiles, between which pleated textiles are fixed.
These structures can be adjusted in various ways:
- with the help of a chain;
- remotely;
- with a special pen.
Day/night systems are equipped with additional profile. In addition, the fabric on such products is much denser, therefore, when closed, the canvas practically does not let through sunlight. If the structure is folded, the thickness of the fabric will not exceed 5 cm.
Pleated blinds can be installed in different areas:
- on the window frame;
- along the glass contour;
- into the window opening.
Blinds for sliding windows can be used on double-glazed windows with non-standard form, for example, triangular, round or in the form of a trapezoid. The fabrics are washable. The only exceptions are structures that have metal coating. In this case, the cleaning process consists of wiping the dust with a damp cloth. Pleated designs are made in great variety colors, which allows consumers to choose the perfect option for any style of interior.
What are the features of vertical blinds on the balcony and loggia
Vertical blinds can close from left to right, right to left, and also diverge in both directions from the center. Most often, the installation of structures is carried out on the ceiling or walls. Brackets are used for fixing.
The design of vertical blinds consists of the following elements:
- eaves made of aluminum or plastic;
- lamellas placed in a vertical position;
- a connecting chain equipped with runners and weights;
- control cord.
When closing, the lamellas wrap around their axis, and when opened, they gather into an accordion. These elements are made of aluminum, fabric or plastic. For balconies, loggias and residential premises, manufacturers offer products decorated with various patterns, which gives the blinds the maximum resemblance to curtains. Thanks to special impregnation, fabric blinds are less prone to fading in the sun. In addition, the material acquires dust-repellent properties.
Note! Fabric vertical blinds are ideal for mounting on plastic frames. The size of such products allows you to block windows of any size. You can also install vertical blinds on the door.
Vertical structures can be closed with one movement of the hand, while shading the entire balcony. To achieve the same result with horizontal products, you will have to close each window individually.
Related article:
- do not fade under the influence of ultraviolet;
- do not exfoliate under the influence of moisture due to the protective lacquer coating;
- equipped with control handles of optimal length.
Among the disadvantages of such structures is the high cost and significant weight.
Note! Wooden crafts undesirable to use on balconies with big windows, because during operation problems may arise with swivel mechanism. If you still want to install such blinds, you should abandon the bulky design in favor of small sections.
For the manufacture of fabric balcony blinds can be used different kinds textiles, but the most popular option is polyester.
Advantages of fabric products:
- long service life;
- high resistance to ultraviolet radiation;
- simple operating system.
The disadvantages of fabric blinds include the imperfection of the design. At the edges, the fabric is not protected by anything, because of which its structure may change.
Bamboo blinds for the balcony have the appearance of a woven fabric, characterized by high strength and moisture resistance. Most often, Roman and roll models are made from this material. Products whose width does not exceed 100 cm are equipped with a metal cornice. He is decorated decorative strip repeating the shade of the canvas. Models with a width of more than 1 m have a cornice with wooden lath. Manufacturers mask it with a bamboo tail.
Metal and multiimpressive blinds on the balcony windows
Metal structures are less in demand because they are more suitable for office and commercial spaces than for living rooms. The fact is that the lamellas made of aluminum are very noisy, which is one of the main disadvantages of the design.
Advantages of metal products:
- low cost;
- do not need special care;
- not afraid of the influence of the sun and moisture.
Multiimpressive blinds are products with original design. They can combine several shapes, materials and textures. The advantage of such canvases lies in their unique and unusual design. The range of multiimpressive designs allows you to choose blinds that fit into romantic setting or an interior made in a simple style.
Useful advice! If the kitchen space is combined with a balcony, experts recommend using structures with metal lamellas. They are not afraid of moisture and do not absorb odors. For cleaning it is recommended to use detergents containing no abrasive particles.
What is better to order blinds in size: the choice of the optimal dimensions of the product
In order not to be mistaken with the choice of the size of the product, it is necessary to decide where the blinds will be installed: on the glass, on the wall or in the window opening. If it is intended to mount the structure on the sashes, then optimal width will be equal to the distance between the glazing beads. 3 cm should be added to this indicator. this case The length of the blinds must match the height of the window.
If the design will be installed in a window opening, then the width of the product must correspond to the width of the double-glazed window. In addition, you will need to add the thickness of the side seals. The optimal length of the blinds will be equal to the height of the double-glazed window with an allowance of 2 cm. The canvas should be placed so that the cornice does not cling to hinges and slopes.
If the blinds will be mounted on the wall, their width is selected taking into account the size of the window opening and an additional allowance of 10 cm. The length in this case can be arbitrary. At least 5 cm of free space should be left above the opening so that the cornice can be fixed.
Can window blinds be used instead of doors
AT recent times decorators resort to non-standard design solutions using blinds, installing these structures in doorways. This approach to zoning space looks very original. In order for the blinds on the door to harmoniously fit into the interior of the room, you need to give Special attention choice of construction, its design.
Blinds are not able to become a full-fledged replacement for doors: they do not contain noise and are not able to protect the room from penetration. These structures are used as partitions between two rooms. These products may be used in combination with conventional door leaf. It is desirable that it be glass.
As in the case with window structures, blinds installed in the doorway can be vertical, horizontal, in the form of an accordion or roller shutters. In addition, there are products of the "string" type. They are made of threads and are used to protect the room from the sun.
Blinds can be installed in the balcony doorway only if the balcony or loggia has high-quality insulation and glazing. Raising or closing such a partition will increase the total space of the living space. Most often, the balcony is combined with a kitchen, living room or bedroom. In this zone, you can equip a seating area, a compact dining room, a workplace.
The choice of blinds depends on many factors. Be sure to take into account the purpose of the room and its placement in relation to the cardinal points. If the balcony will be equipped work zone, it is advisable to select products that will help to smoothly adjust the level of natural light. For rooms located on the north side of the building, it is recommended to take blinds with thin canvases.
In a relationship decorative features the choice of design depends on the personal preferences of the owner of the apartment and the style in which the room is decorated. The modern range of blinds allows you to choose products that will match the taste of even the most demanding customers, so there shouldn't be any problems with the choice.
How to install blinds on windows: video technology overview
