How to attach roller blinds to a window. Different ways to install roller blinds on plastic windows. Fixing Mini Roller Blinds with a Spring Bracket

Not many people know that blinds were invented several centuries ago. Today it is one of the most popular decorative and protective devices for windows. The article will discuss how to independently hang blinds on plastic windows. You can find out what types of window curtains are and how to properly install vertical and horizontal blinds.

Kinds

Blinds- one of the types of window curtains, devices in the form of rigid, arranged parallel to each other and adjustable plates, made of various materials - fabric, wood, metal, plastic. They have several functions:

protect from light
decorate the window
regulate air flow.

There are several types of blinds. The most common of them are:

horizontal;
vertical;
roll;
pleated.

Let's take a look at the advantages and disadvantages of each type.

Did you know? The official history of the invention of blinds begins in 1841. It was in this year that their production was patented by the American John Hampton, although the production of rigid curtains was carried out before. So, since the 1760s, they were produced in Philadelphia by the Englishman John Webster.

Horizontal

Horizontal or Venetian blinds are thin plates (lamellas) that are arranged one above the other like a ladder. They are interconnected by a cord that allows you to open and close them, as well as adjust the height. The plates are controlled by a rotary rod. Lamels can be made of different materials - wood, metal, bamboo, fabric.

The main advantages of these types of curtains are:

good sun protection
increased heat transfer;
the ability to control the intensity of lighting;
reliability;
durability;
ease of maintenance and operation;
the ability to visually expand the size of the room;
easy installation;
the ability to use for any premises, including kitchen, bath, balcony;
low cost.

There are no downsides to horizontal blinds. They can be present only depending on the material from which they are made. We will discuss them in more detail in a separate section below.

vertical

Vertical blinds appeared somewhat later than horizontal ones - in 1960. However, they quickly gained popularity and today are successfully used to decorate various rooms.

These are plastic, metal or fabric lamellas suspended on a cornice in a vertical position parallel to each other and connected at the bottom with a cord. They are regulated by a side mechanism that rotates the plates - with the help of a decorative cord (chain) they turn, with the help of a rope they move in one direction, fully or partially opening the window.

The advantages of vertical blinds are:

versatility - the ability to install in window openings, to the ceiling, to the wall above the window, installation in skylights and ordinary windows;
ease of installation;
ease of care;
effective regulation of the flow of sunlight;
good air access when dimming;
the possibility of combining with ordinary curtains;
the ability to visually increase the height of the room.

Among the shortcomings should be mentioned:

inconvenience when shifting to the side when opening the window;
the impossibility of placing flowers on the windowsill when fastened to the window opening.

Rolled

Roller blinds have recently entered the field of view of modern apartment design. Preference is given to them by those who love coziness and comfort in the house. It is they who are able to create them in the bedroom, living room and kitchen. In addition, the appearance of roller blinds is more attractive than other types, while the functionality also remains on top.

They are designed in the form of a horizontal shaft, on which a roll of fabric is wound, and a control mechanism in the form of a cord, a spring holder or an electric drive. The fabric can be lowered and raised to the desired length, completely or partially closing the window. Roller blinds are mounted in the window opening, on the ceiling or on the wall, on the window sash.

The advantages of roller blinds are:

ease of operation;
ease of care - the fabric is impregnated with dust and water-repellent composition;
the possibility of implementing any design idea;
durability;
good protection from sunlight and overheating of the room;
the ability to create any degree of illumination of the room;
environmental friendliness;
ergonomics;
possibility of installation on skylights;
when installed on each sash, there is no interference with opening windows and decorating the window sill;
the possibility of making curtains from transparent materials.

The disadvantages include the price, which is much higher than the more familiar and common horizontal and vertical designs, as well as the fragility of the spring holder.

Cassette blinds are one of the types of roller blinds. This is an option designed for plastic windows. It is assumed that the slats or a fabric roll are hidden in a specially designed box (cassette) attached to the window sash when closing.

This design allows you to save space, free the window and window sill, additionally protect the material from dust, dirt, and deformation. Cassette options are made of fabric, bamboo, aluminum, plastic. There are three types of cassettes: round, angled and flat.

Pleated

Another option for fabric blinds is pleated blinds. As the name already implies, these are fabric curtains assembled in a small fold. Their choice is huge and is represented by various colors, density of fabric material, shapes. Some of them are sewn according to a special pattern.

Thanks to this, pleated curtains can fit into any interior, creating an original atmosphere. This option is a piece of fabric, which is attached to a special profile and is controlled by a chain, cord or electric drive.

Advantages of pleated blinds:

originality;
external attractiveness;
good functionality;
durability;
reliability;
miniature design;
the possibility of designing a window of any shape and from any material.

Original and sophisticated solutions in the interior are not complete without the use of multiimpressive blinds, i.е. those in which the lamellas are made of various materials using a variety of decor.

Varieties of material

As already mentioned, at different times the blinds were made from different textures. Today, the most common materials for window hard curtains are fabric, plastic and aluminum, less often wood. Each of them has both pluses and minuses.

fabric

Textile blinds- this is one of the best options for decorating windows and protecting the room from sunlight in apartments and houses. There are both horizontal and vertical designs.

Many people are drawn to the look and color options of fabric blinds, but are put off by the notion that they require the same maintenance as regular curtains. However, it is not.

Textiles for blinds are impregnated with special impregnations that prevent dirt, dust and moisture from being absorbed. Care will consist only in periodically wiping the material with a slightly damp cloth and vacuuming.
High-quality textile blinds do not fade, do not deform, fit into any interior, and are not too expensive. However, compared to metal, plastic and wooden structures, they have a shorter service life. Textile models are not the best option for the kitchen or catering establishments, as they can absorb odors.

Did you know? The first blinds were made from wooden plates. They were replaced by metal curtains. After World War II, fabrics were also used to make window guards.

Plastic

One of the most purchased types, due to its low price and the possibility of using it in various premises - office, apartment, public, utility, with high humidity. The polymers from which the lamellas are made can be with varying degrees of light transmission, various colors, with or without patterns. They are practical, lightweight, easy to install and maintain, and are sold at the best price.
Among the disadvantages:

creating noise in a draft, with open windows;
some polymers turn yellow under prolonged exposure to sunlight;
cannot be used near stoves and other heating devices due to poor resistance to fire;
release of toxic substances in case of fire.

Aluminum

Along with plastic, aluminum blinds are also popular. They have high strength, durability, fire resistance, ability to withstand different temperatures, moisture. They are often used to protect windows in public places, offices, medical institutions. They have an attractive price. They can be horizontal, vertical, cassette.

Among the shortcomings - a heavier weight, the creation of a noise effect in a draft.

Wooden

Wooden blinds are used in certain types of interiors, they go well with fabric curtains and natural wood furniture. They allow you to create a warm homely atmosphere. They are reliable, durable, durable, environmentally friendly, protect well from the sun. However, they are one of the most expensive options.

Installation technology

Blinds can be installed without the help of professionals. We offer you instructions for working with horizontal and vertical hard curtains.

Horizontal

Horizontal structures can be fixed in four ways:

to the ceiling;
to the wall above the window;
in the window opening;
to window sashes.

First you need to take measurements. The height and width of the window opening is measured with a tape measure. On a sheet of paper, it is necessary to draw a diagram of the window, on which measurements will be taken in the future.

When installing curtains in a window opening their size is calculated by subtracting 1 cm from the height, 2 cm from the width.

When installed above a window opening the size of the blinds is calculated based on the addition of 5-7 cm to its height and 20 cm to its width.

When attached to the sash the width is measured from the junction of the glazing bead with the window on the left side to the junction of the glazing bead with the window on the right side, adding 1 cm.

When measuring height on a blind window 3 cm is added to the distance from the glazing bead to the glazing bead, on the sash - 4 cm.

Video: how to measure horizontal blinds

Conventional horizontal blinds consist of the following elements:

upper part - swivel axle, rollers, cornice, brackets, cord retainer, swivel mechanism, top cover;
the middle part - lamellas and a plug;
lower part - lower cornice, side covers.

The following tools are required for installation:

screwdriver;
pencil;
screws.

The technology for mounting finished aluminum blinds on plastic windows is as follows:

Straighten the structure.
Remove control knob.
Attach fasteners to the top bar.
Attach the structure to the installation site and mark the places for attaching the brackets. The distance between them must be at least 60 cm.
Attach the brackets to the wall, window frame or sash.
Insert the top cornice into the brackets.
Open the blinds and mark the places for attaching the lower clamps.
Attach bottom fasteners.
Insert adjusting knob.

Important!Care must be taken to ensure that the brackets do not get into the control mechanism, cord retainer or caliper..

Video: installing horizontal blinds

If the finished blinds are longer than necessary, they can be trimmed. To do this, remove the side and remove the lower latches from the bottom bar. Then pull out the knots of the cord from the two holes formed and untie them. Remove excess slats. Re-insert the cords into the holes of the bottom bar and tie knots. Return the lower and side clamps.

You can also shorten the blinds in width, but this is much more difficult to do. In order not to spoil the curtain, it is better to contact the master. For trimming, you need a hacksaw with fine teeth. The slats should be folded into one strip and sawn off to the required length. Then polish the ends with a file, if necessary - tint.

Installing roller blinds

To install roller blinds on a wall, in an opening or on a ceiling, you will need drilling and a drill or punch, depending on the material from which the ceiling and walls are made. Roller blinds are attached to plastic or wooden windows using double-sided adhesive tape and PVC brackets without drilling.

If the blinds are attached to the sash, then to calculate their dimensions, you will need to know not only the width and height of the window, but also the depth of the glazing bead. The choice of system will depend on the latter size. With a bead depth of more than 1.5 cm, you need to pay attention to the Uni type system, up to 1.5 cm - Profil and Mini.
Add 3 cm to the width of the glass - this will be the width of the curtain. The length of standard curtains is about 2 m. If they are too long for your windows, they can be cut.

Important! The length of the roller blinds is calculated based on the fact that there must be at least 50 cm of fabric on the roll.

The technology for mounting roller blinds without drilling is as follows:

Install a cap on one end of the roll, and a swivel mechanism with a plastic chain on the other.
Insert the latch into the bracket and fasten it to the bracket.
Install the brackets on the roll according to the instructions.
Attach the curtain to the attachment point.
Mark the mounting points for the brackets.
Make sure that nothing prevents the opening of the curtains.
Degrease the place of attachment of the brackets.
Stick adhesive tape on the sash at the place where the bracket is attached.
Degrease brackets.
Peel off the protective tape of the tape.
Hang the blinds by pressing the adhesive tape at the attachment point.

Video: how to install roller blinds

If you purchased a ready-made curtain, but it does not fit your window, then its size can be reduced. In order to shorten them in width, you will need to cut the roll, web and bottom rail. It is much easier to cut the fabric to length. The fabric is cut with ordinary scissors under the ruler, and then the lower rail is attached to it.

Installation of cassette blinds

Cassette blinds are also attached with adhesive tape. In order to install them, you need:

Print product.
Degrease the attachment point to the window frame.
Attach the cassette to the attachment point and lower the fabric to the lower position.
Mark the location of the cassette attachment with a pencil.
Remove the protective film from the adhesive tape attached to the back of the cassette.
Attach the cassette to the frame, press and hold for a few seconds.
Carefully remove the protective tape from the top edge of the metal fabric guides on both sides.
Install the guides into the groove of the cassette of the shade body and press down.
Gradually removing the protective layer of adhesive tape, press the guides parallel to the frame glazing bead.
Do the same on the other side.
Install a limiter.

Video: installing cassette blinds

vertical

Vertical curtains can be attached in three ways:

in the window opening;
to the wall above the window;
to the ceiling.

They can have left-hand, right-hand and central control. Below you will find instructions on how to install vertical rigid curtains on your own.

In the window opening

To calculate the dimensions, you need to measure the width of the window opening and subtract 1-1.5 cm. Measure the height of the opening and subtract 1.5-2 cm. Measurements must be taken 5-7 cm deep into the opening, since it usually narrows. To make sure that after installing the blinds the sash will open, you need to measure the distance from the top edge of the sash to the upper slope of the eaves installation point. The distance must be at least 4.5 cm. Otherwise, you will have to measure in the overlay. Because the window may be uneven, the width and height must be measured at three points.

You can attach vertical blinds to the window opening in this way:

Mark the mounting points.
Drill holes.
Install brackets.
Insert the cornice into the special grooves on the holders and snap the locks.
Install fabric.
Insert weights.
Fasten the bottom chain.

Above the windows

To calculate the size, add at least 18-20 cm to the width of the window opening on each side. You will also need to measure the distance from the ceiling to the upper corner of the slope. At least 10 cm should be retreated from the upper slope angle. Measurements with fastening to the ceiling are made by subtracting 1-2 cm from the distance "ceiling - window sill", "ceiling - floor" - 4-7 cm.

There was a time when there were no curtains for windows. In the best case, the window opening was covered with a sackcloth or a piece of canvas according to the size of the frame. Time passed, curtains and tulle made our windows beautiful and elegant. What now? We again return to the functional piece of the “canvas”, whose name is blinds.

Varieties of blinds

For home comfort today there are a dozen types of such structures: with vertical or horizontal slats, roller shutters and pleated windows, for roof windows and inter-frame windows, for arched openings or bay windows, beautiful Roman curtains and multi-impressive curtains, with electric or protective (rollers), unusual photo blinds .

This type of window decor is made from different materials: they are wooden and bamboo, metal (aluminum) and fabric, plastic and paper. Among all the blinds, roller blinds are gaining more and more popularity.

There are several types of them, differing from each other in the material used, dimensions, method of attachment and installation option:

Classic open blinds look great on large windows. They are installed with mounts on the ceiling or on the wall or in the window opening. They are controlled by a chain or a spring mechanism. Such curtains occupy a minimum of space, cover a large window space, due to this they have a low cost. At the same time, they quickly become dirty, windows do not open well with them, installation requires male strength.

Cassette closed Uni. The twisted fabric is fixed in a plastic box, which can match the color of the PVC window panels. The cassette is mounted directly on the frame. Due to the chain or spring mechanism, the fabric is untwisted from the roller. Buyers like this type of roller shutter, as the box is hardly noticeable on the window block, the canvas does not interfere with opening the window, and literally moves away from the glass by a centimeter. The window sill is not cluttered with the structure. Two boxes can be installed on each frame: at the bottom and at the top. The curtains will open and close towards each other. Can be mounted on inclined skylights. The only drawback is the high cost.

Mini roller blinds open can be installed on the sash and directly on the frame. The mechanism of the system is chain. These roller blinds are self-adhesive, that is, windows that do not require drilling or are mounted on self-tapping screws or brackets. The mechanism does not interfere with opening the window, the curtain does not occupy the window sill. Due to the invisible line used, the curtain needs to be handled with care. If double-sided tape was used for fastening, it can “melt” from high temperatures and the structure will fall.

When choosing the type and type of roller shutters, do not forget that:

they must comply with the overall design of the room;
if there are large window sills, it is better to leave them for flowers or under the shelves, and choose cassette curtains with a frame mount;
for small windows, roller blinds with mounting on the ceiling or wall are more suitable - this will visually enlarge the window openings.

Installation methods

Before choosing the installation method, you need to decide on the installation location of the roller shutters. They can be installed on the ceiling or the upper slope of the window, on the wall above the opening, in the wall on vertical slopes, on a blind window, on an opening sash, on glass.

Take into account that the longer the mounting bracket, the more the web is wound onto the shaft. For a textured or long canvas, choose the longest brackets.

There are the following ways to install roller blinds:

by drilling a wall, ceiling or window opening, installing plastic or wooden dowels into the holes, fixing the brackets with self-tapping screws or screws;

by drilling the window frame and fastening the holders with self-tapping screws;

without the use of a drill and a screwdriver, by installing curtains on brackets-clamps (clips);

without drilling, by gluing on double-sided tape.

How to assemble?

When buying roller shutters, the kit will include all the necessary fastening materials:

Control hoist with bushings and chain.
Side plugs, latches and brackets of the mechanism with a cross for self-tapping screws (you may have to buy metal brackets for the wall, ceiling or clips for the window sash).
Guide line (synthetic string).
Limiters for the chain, fixing the position of the web at the top and bottom.
Mounting plate and double-sided tape.
Magnets-clamps for attaching the curtains with the lower bar to the frame.

Manufacturers offer a large selection of kits for mounting roller blinds. Choose the one that suits your mounting method, and then you do not have to buy additional individual elements. If your boxless blinds were store-bought rather than custom-made to exact measurements, there may be a problem with fitting the design to size.

You can trim some types of curtains yourself. For this:

measure the window: when installing on the frame, the best experts recommend taking into account the width of the clearance plus the width of the glazing bead - this will be the width of the web and shaft;
unfold the curtain and remove it from the shaft;
measure and cut off the excess shaft with a hacksaw;
cut (saw off) the excess of the lower bar to the curtain;
lay the canvas on a flat surface;

measure the desired width and draw an auxiliary line;
cut off excess fabric with sharp scissors or a construction knife;
the length of the canvas can not be cut, but simply fixed with the help of limiters; if trimming is needed, then disconnect the web from the shaft, cut it off from above and glue it to the shaft again.
The roller blind is now ready for assembly.

Rolleta can be with or without a guide line. It depends on how the structure is assembled. But always start by reading the instructions.

Assemble the curtain without a string as follows:

Determine from which side it will be more convenient for you to use the control mechanism.
Place a roll of canvas slightly unfolded from the top edge in front of you.
Locate the adhesive strip with the protective film on the shaft, remove it.
On the very edge of the fabric, place the shaft on top so that the adhesive strip lies on the fabric.
Glue the canvas to the shaft.
Start winding the fabric onto the shaft by simply turning the shaft towards you and winding the fabric at the same time. Do this carefully, the fabric should lie flat.
Insert a metal or wooden weighting bar into the hem of the bottom edge.
Insert a side lock into the shaft on one side, and a lock with a control mechanism on the other.

The string in the roller shutter stretches the canvas and does not allow it to sag in the roof windows and when the sashes are opened. The fishing line protects the product and keeps it intact longer

There are several ways to attach a string to a window panel. The chosen method depends on the design features of the roller blind. We offer one of the ways.

Assemble the curtain with a string in the same way as the previous method, with the following steps:

The weighting bar for the lower edge of the canvas should be equipped with side holes for fishing line.
Cut the string from the set in half.
There are holes on the brackets where the roller blind will be attached. Pass one piece of fishing line through one fastener and tie with a double knot.
Do the same with the second piece of fishing line and paired fasteners.
Install the shaft with the curtain in the brackets, unfold the fabric to the maximum desired length.
The fishing line hangs freely vertically along the canvas on both sides.
Pass it through the holes on the weight.
Attach brackets with holes for fishing line to the bottom panel of the frame.
Align the canvas, stretch the strings and tie them to the brackets.
Now you can raise and lower the curtain roll, open and close the window - the strings will securely hold the canvas.

This is ideal for skylights.

Step-by-step installation instructions without drilling

You can do without dowels and self-tapping screws if you use the following types of fastening: double-sided tape or clamping brackets (clips). With adhesive tape, fasteners can be glued to the frame and the opening sash of the window or glass. But the clips are used only on the wings.

When attaching with tape, follow these simple instructions:

The frame must be dry and warm, without condensation.
Treat the joints with degreasing agents (both on the frame and on the fasteners).
Mark the attachment points with a pencil, use a level for this. Focus not on the window sill or frame, but on the horizon, otherwise the curtain fabric will warp.
Remove the protective film from the adhesive tape and stick on the fasteners.
Remove the second protective film and attach the fasteners to the frame or glass.
Insert the side clips for the curtain (one is blind, the other is with a chain).
Insert a roller with a canvas into them.

Having decided on the length of the canvas, install limiters on the chain.
At the level of the lower bar, make markings on the frame for attaching magnets.
Put metal washers (hardware) on the adhesive tape and fix it on the frame.
Attach the magnets from the kit symmetrically to the curtain.
Connect hardware with magnets.

Clamps-brackets (they are also clips, they are also spring brackets) are a real fixing find for a home craftsman. They are made of metal and PVC. For plastic windows, it is better to use plastic clips.

For installation, use our simple instructions.

Open the window.
Put on two brackets on top, try on how the window will close.
Mark the places where the clips are attached to the frame so that they do not interfere with the roller blind and the frame.
For safe use, stick the clamps with double-sided tape to the frame (do not forget to degrease the surfaces).
Insert the side fasteners.
Install the roll shaft.
Check the functionality of the design.

You can also see how to install a roller blind on a window in the next video.

Correctly install roller shutters on metal brackets

If before that it was mainly about attaching curtains to window frames, now let's talk about installing structures in a more time-consuming way: using a drill and a screwdriver. In addition to these tools, you will need a level, a plumb line, a screwdriver, dowels, metal brackets, self-tapping screws, a pencil, a pen or marker, a hammer, a stepladder or a table (chair), glue (in the form of PVA or liquid nails) - if you accidentally made a hole larger than necessary, put the dowel on the glue.

You will need all these tools to fix the roller blind box to the wall or ceiling or the upper slope of the window opening using metal brackets. Accurate calculation is very important in this work. Be careful when marking. Extra holes in the wall will not decorate it.

Before starting installation, check if the surface is level. Any bump or dent can interfere with the smooth installation of the structure. Align the wall or, if possible, choose other fixing points.

On the wall

The curtain is installed on the wall for several reasons:

to hide the defects of the window sill and window;
to visually enlarge the window;
to warm up the room.

Procedure:

Determine the center of the window.
Attach the assembled roller shutter with brackets to the wall above the upper slope of the window.
Center it and level it.
Mark with a pencil or marker the attachment points through the holes in the brackets.
Detach the brackets from the roller.
Drill holes according to the marks, install dowels in them.
Using a screwdriver or screwdriver, fix the brackets.
For a line roll, follow the instructions above.
Install the shaft in the brackets, secure with clamps.
Put the web movement limiters on the chain.

To the ceiling

When you need to visually stretch the room, install blinds from the ceiling. They can end at the level of the windowsill or be longer. At the same time, the same metal brackets are used for installation, but they are turned with holes towards the ceiling.

If the level shows you a violation of the horizon due to uneven ceilings, place a small wooden or plastic pad under the bracket to level the structure.

On the upper slope in the window opening

Since the slopes are not always even and horizontally located relative to the floor, be sure to use the level. Otherwise, the canvas may warp, the roller blind will not be able to function correctly. In addition, be especially careful in choosing the size of the curtain. For mounting, use the same metal brackets and our instructions. If you fix the brackets to a wooden wall, ceiling or slope, then this can be done with self-tapping screws without drilling and dowels.

On the frame sash

We have already told you how to fix a roller blind without drilling, now we want to introduce you to the installation of curtains with PVC guides.

The cassette model with a box is installed in the following way:

Remove the side plugs from the box.
Attach the box to the top bead of the frame and mark the holes for attaching the structure.
Using a screwdriver or screwdriver, screw in the screws on both sides.
Put the plugs in place.
Release the canvas, about 10-15 cm.
Remove the protective film from the adhesive tape on the rail.
Carefully glue both guides so that the canvas is under them, slightly pressed against the glass.
Place chain stops.
If your curtain is without a chain, then you need to install a decorative weight included in the kit on the bottom bar.

Another way to install roller blinds is not from above, but in the middle or from below. This original method was made possible thanks to the emergence of a new type of Mix curtains. The design is so interesting and elegant that it will definitely attract your attention. At the base is a guide string along which the canvas moves. In this case, a light box can be located both at the top and in the middle or go down.

Depending on which mounting method you will use, the dimensions of your curtain will be different, although the window is the same.

When you take measurements, remember:

Curtains mounted on the ceiling and wall are the easiest to model. Here you can make a mistake by a couple of centimeters, since they are superimposed on top of the window opening. The model is completely dependent on the vision of the designer. The width should be made about 10 cm wider than the opening, and the length - as desired.
When installing on a wall, please note that the top box will take approximately 5 cm.
The roller blind in the window opening is 4 cm less than the installation site.
The sheet for roller shutters with PVC guides must be exactly the width of the glass, as the guides are attached to the glazing beads.

For the Mini system, the fabric should be three centimeters wider than the glass: one centimeter - on the glazing bead at the handle, two centimeters - at the hinges.
When using a guide string, the width of the canvas is equal to the width of the glass plus 3 cm if you do not want side gaps.
Before mounting on metal brackets, make sure that the length of the leg is enough so that later the roll does not touch the wall. ½ shaft radius + 1 cm - the distance to the edge of the bracket from the wall, necessary for the normal operation of the roller blind.

Humidity in the room where such blinds are used should be no higher than 70 percent.
Since the canvas is impregnated with a special dirt-repellent composition, do not try to clean it often with a wet method. Before use, check the composition of the canvas and the rules for caring for it.

In order for the roller blinds to serve you for a long time, raise and lower them using the control mechanism (chain or weight).

Incorrect measurements. Do not forget - the concept of "web width" is not equal to the concept of "curtain width". Don't forget the fasteners and box.
Inappropriate mounting method. If you have brackets for the window sash in the kit, and you plan to install the box on the wall, then you have made a vain purchase: you cannot install the curtain in this way, and the size will not fit.
Not enough details. In stores, you can buy fasteners and accessories, but you need to start with the seller of the product. And here it is important to be in time within two weeks from the date of purchase. Don't forget the check!
Faith that it will be possible to do without drilling. This does not always happen. Double-sided tape is not omnipotent. Attaching them to a box to a wall or ceiling does not make sense, and it is dangerous.
Uneven mount due to overestimation of his eye. Feel free to use the level! It is always more offensive to redo than to do it the first time with high quality.
Impossible to remove the control unit. When buying ready-made curtains, check their design features: there are models in which the control mechanism cannot be removed. This will result in your window having two right-handed or left-handed curtains. Ugly and interferes with opening the window.
The brackets are too close to the wall. This will interfere with the unfolding and folding of the roll. Consider other details or options.

How to care

But now the moment has come when the curtains are installed and you actively use them. So, soon the question will appear on the agenda: how to clean them?

Since the roller blind is a canvas, it absorbs not only dust, but also odors. Ventilate the room regularly: this way you will get rid of odors, and the dust will be shaken off.
If necessary, you can use a soft cloth or a vacuum cleaner with a cloth nozzle. If you do this with every cleaning, the curtains will stay clean for a long time.

An eraser is a good tool. The canvas is impregnated, and the eraser will wipe off various stains well. Just don't grind to the holes!

If this does not help, remove the box, disassemble it and take the canvas to a good dry cleaner.
Don't have dry cleaning or extra money? Then pour warm water and a non-aggressive detergent without bleach into the bathroom. Put the canvas in the bath and gently rub it with a soft sponge. Rinse the curtain several times. Make sure that detergent (especially granules) does not remain on the cloth.

Professionals know what roller blinds are, how to assemble them and install them. If these processes are done by hand, you will need to find out the principle of curtains.

Roller blinds can be attached to the window in two ways: with double-sided tape or with self-tapping screws to the bracket.

Sequencing

Roller blinds consist of a bracket, a control mechanism, a control chain limiter, a bracket area for fixing curtains, grippers. Some products are equipped with an additional curtain fixation system used for an opening window. Assemble the bracket first. To do this, you need to fix its constituent elements.

Scheme of assembly of the roller blinds bracket.

Double-sided tape is glued to the bracket. If installation work is carried out using self-tapping screws, then the platform is not required. The brackets are connected to the platforms until they click. To fix the parameters of the product, the design is assembled on the windowsill. Then it is applied to the window sash. Make marks with a pencil for the location of the right and left platforms. The next step involves the final gluing of the site to the sash.

Before carrying out this procedure, the surface is degreased. To do this, use alcohol or gasoline for lighters. Double sided tape can only be used once. If the right bracket is fixed, put the shaft on it. Fabric is wound on the last unit. The left bracket is attached to the structure. Make a mark on the location of the appropriate site. The left bracket is disconnected from the platform. The last element is glued on the window profile, taking into account the marks made.

The shaft is inserted into the right bracket. The left analog is fixed. The curtain falls. The location of the magnetic latch will need to be marked with a pencil. The curtain is attached to the sash, taking into account the width of the fabric. If necessary, a specialist can take measurements.

Back to index

Assembly process without box

Roller blinds of various systems, including Mini, are delivered unassembled without a box. The assembly of such a system begins with a section of the package and a study of the instructions. The line is threaded through the holes provided in the corners. Double knots are made at the ends of the line. The string is cut in half. The capsules are inserted into the curtain shaft and snapped into the corners.

Subsequent assembly is carried out simultaneously with the installation of the entire structure. There are several methods of fastening the product in question.

If roller blinds are installed on the sash of a window opening, there is a minimal loss of usable space.

Initially, you need to measure the product.

Roller blinds are presented in the form of a simple design. The fabric is wound on a shaft. The device has a special mechanism for lowering and raising curtains without a box. If such products are made to order, then the canvas does not need to be adjusted. Otherwise, the curtains are cut.

To do this, you need to take measurements. The length of the roll web is the distance between the outer edges of the horizontal glazing beads, the width is the distance between the corresponding vertical elements. The canvas is unfolded and removed from the shaft. A cap with a protrusion is mounted on the shaft.

Roller blinds are spread on a flat surface. On the product, measure the desired width and make a mark. Curtains can be cut with scissors or a utility knife. The next step involves fixing them to the shaft. First you need to remove the protective film from the surface of the last element. The upper edge of the product is folded up by 5 cm. The shaft is placed in a niche with a strip upwards. The installation of the 1st element is carried out in a horizontal position.

Attaching roller blinds to a window or wall is not such a difficult job as it might seem from the outside. If desired, any owner of the apartment can install such structures, while saving a significant amount on the services of professional installers.

To do this, you need a simple set of home building tools and basic skills in working with them. In this article we will try to take a closer look at how to fix roller blinds: methods of fastening in one case or another, a phased installation process, features and nuances of work.

Types of design and options for the location of roller blinds

Roller blinds come in all colors and textures.

Roll-up systems are a modern version of window light-shielding systems that combine the style of vertical blinds with the practicality of classic curtains. More and more people, wanting to update the interior of their home, turn their attention to these convenient and easy-to-use designs.

The rich color range and texture of the material make it possible to use roller blinds with equal success both in residential and office premises. With their help, you can give the interior the necessary direction: in one case, it can be distinguished by grace and a bright play of colors, and in the other, it can be emphasized by a businesslike and strict style.

Design features

All roller blinds are structurally composed of a light-protective fabric and a shaft with controls. The canvas can rise, winding on a shaft, or fall, blocking access to outdoor lighting inside the room.

There are two main types of roll systems:

Open type. The shaft with a strip of fabric wound around it in this case is not closed by a protective box, but is installed on the end fasteners in an open way.
closed type. In such a system, the shaft is installed in a special box. Firstly, it protects structural elements from external damage and dust, and secondly, it gives the curtains a more presentable look. By choosing the right color of the box, you can organically fit it into the surrounding interior.

Roller blind installation work

Method of fastening curtains in relation to the window

In order to hang fabric roller blinds on windows, you will need the following tools:

building level;
pencil;
tape measure or long ruler;
drill or perforator;
screwdriver or screwdriver.

Before proceeding with the self-assembly of the structure, you should carefully read the attached assembly instructions.

Also make sure that the product is complete, check that all parts are included.

Mounting methods

There are several ways to install roller blinds, differing in the place of their attachment and the set of fasteners.

You can attach them to the ceiling, the wall above the window, or directly to the window opening or to each individual sash.

In this case, the following mounting options can be used:

self-tapping screws;
spring brackets;
double-sided mounting tape;
side rail design.

Mounting with self-tapping screws

In this way, you can mount roller blinds on plastic windows, wooden frames, on a wall or ceiling. First of all, you should assemble the entire structure:

It is best to fix roller blinds with self-tapping screws on wooden windows. If you suddenly decide to change the light-shielding structures for others, the holes in the tree can be easily puttied and painted over.

It will be much more difficult to seal holes drilled with self-tapping screws in metal or plastic frames. For more information on installing roller blinds, see this helpful video:

Installation with double sided tape

Adhesive tape will only withstand light structures

Most often, using double-sided tape, roller blinds are attached to the frames of plastic windows. Thanks to the adhesive tape, the window frame remains intact, and after removing the curtains, no holes remain on it.

Since the adhesive tape has a certain tensile strength, it will be possible to attach light-shielding structures of relatively low weight to it, most often intended for one window sash.

Work on the installation of curtains to the window frame is carried out in the same manner as for self-tapping screws. Initially, measurements and marking of the fastener place are made with a pencil and a level, and then the curtain is adjusted to the center of the window.

Before attaching to tape, clean the frame from dust

Adhesive tape on one side is attached to the box or fasteners of the blinds. After that, the protective layer is removed from the outside of the adhesive tape, and the structure is carefully glued to the surface of the frame in the right place.

Instead of tape for roller blinds, you can use building glue or liquid nails. However, it should be borne in mind that the structure will be attached to the frame very firmly, and certain difficulties may arise during its dismantling.

Before attaching the adhesive tape to the frame, it should be cleaned of dust and other contaminants, and, if necessary, degreased with a solvent, gasoline or white spirit.

Mounting on spring brackets

This method is used to fasten roller blinds to opening window sashes. This method is good in that it makes it possible to do without drilling window frames, and also allows, if necessary, to dismantle and reinstall the roll system on the window. See this video for details on attaching roller blinds to windows:

Before installation, you should assemble the curtain structure, and, attaching it to the sash, mark with a pencil the installation locations of the spring brackets. According to the marks, we install the brackets and the shaft attached to them.

We put on the side covers on the brackets, lower and raise the curtain fabric to make sure that the structure is installed correctly and functions normally. We install a stopper on the control chain in the marked place, fixing the canvas in the lower position.

Installing the side rails

Clips for string guides are fixed with self-tapping screws

If the curtain system assumes the presence of side guides in the form of strings, then after mounting the shaft on the window sash or wall, additional elements should be installed.

To do this, take a string, measure it and cut it to the desired length. From the bottom of the frame, on both sides, you will need to install the appropriate clamps for the guide strings. They can be attached using self-tapping screws, double-sided tape or mounting glue. We fasten the string on the edges of the shaft in specially defined places (see instructions). We measure the distance between them and set aside exactly the same size on the bottom of the frame, marking the attachment points of the lower clamps.

After installing them, we pass the string through the holes of the lower bar on the curtains. We attach the lower edge of the string to the lower clamps, so that it is tightly stretched between them and the shaft, forming a guide for the fabric curtain.

As you can see, installing a roller blind of any design is not so difficult. The main thing is to have the skills of owning building tools and desire. In this case, the installation of roller blinds on the windows should not cause you serious difficulties.