Which door to the bathroom. How to choose doors for the bathroom and toilet, taking into account the characteristics of these premises. Features of glass doors for bathrooms

The issue of choosing door frames should be taken seriously.

It should be borne in mind that for rooms with high humidity, and such are bathrooms and toilets, not every door is suitable.

Doors to the bathroom and toilet should:

• To be resistant to moisture, durable and reliable;
• Easy to endure wet cleaning;
• Possess excellent sound and thermal insulation.

Now the doors to the bathroom and toilet do not always have a narrow width. All more people choose doors of the same size as in other rooms.

In order to improve the ventilation of the bathroom, door leaf set with a gap between the floor measuring one and a half - two centimeters.

Another option to ensure air flow is to make special ventilation holes in the door panel.

Types of doors to bathrooms and toilets

An ordinary painted wooden or paneled door is an outdated option.

Today, manufacturers offer a wide range of modern design doors made from quality materials.

Doors made of wood and veneer.

A wooden door, of course, is beautiful, but it is not cheap. Wooden doors to the bathroom and toilet should be varnished to protect against moisture.

A veneer door is a door made from cheap low-grade wood and pasted over with a thin layer of more expensive wood. It is not very suitable for bathrooms, as the veneer is not resistant to moisture.

The door made of newly appeared euro veneer perfectly transfers moisture. Euro veneer is resistant to mechanical damage and does not fade under the action of sunlight. You can distinguish it from natural veneer by the smoothness of the coating.

Doors made of wood and veneer perfectly retain heat and have good sound insulation. When cleaning them, wiping with a wet cloth is allowed and no use of cleaning compounds.

Door frames made of plastic and metal-plastic.

Plastic doors are not resistant to moisture and have a low cost. Their disadvantage is unnaturalness and low mechanical strength.

Metal plastic is not often used for doors to the bathroom and toilet room, as it stands out too much in appearance among other materials, and it is quite expensive. But the quality of metal plastic doors is excellent.

Glass doors.

The glass door is not very popular. The glass is waterproof, perfectly tolerates wet cleaning.

Modern glass doors have high strength. For bathrooms use opaque or frosted doors.

They can be decorated with tinting, mirror coating or stained glass paintings. Glass doors are the best option if there are small children in the family.

Doors laminated with foil and PVC doors.

A laminated door is affordable, looks like a wooden one.

It is very light, resistant to moisture, washes well, but, unfortunately, it has poor shock tolerance.

A PVC door is similar in design to a laminated one, but stronger and more durable. It's perfect for the bathroom.

Doors from several materials.

Such doors are called combined. Usually they are decorated with opaque, tempered or laminated glass inserts.

In plastic doors glass inserts are not made, in MDF - very rarely, and the use of glass in other types of doors allows you to create a variety of interesting variations.

Types of doors according to the way of opening.

The most common is a swing door. Its disadvantage is that it requires free space to open it.

Now the era has begun sliding doors. They are divided into open and secret. In the first case, the bar along which the door leaf moves is installed directly on the wall.

And the second case requires the creation of a special niche in which the door will hide when opened. The second option is the most time-consuming and is not suitable for every type of wall. Open sliding doors have poor sound insulation.

Doors with a secret system are much better with this, but they will cost more. A common disadvantage of sliding doors is their complex installation, so the help of specialists is often required.

Folding doors are of two types:

• In the form of a "book";
• In the form of an "accordion".

In both cases, the door leaf consists of several movably connected parts. When the door is opened, these parts are folded in the form of a "book" or "accordion", respectively.

An accordion door is usually made of plastic, it is affordable. To create door-books, in addition to plastic, various other materials can be used.

We hope that the review of doors given in the article will make it easier for you to make the right decision when choosing a door to your bathroom or toilet.

Photo door for bathroom and toilet

The choice of doors to the apartment is an important and integral stage of repair. If, when buying interior floors, they rely mainly on external attractiveness, originality of the color scheme and decorative finishes, your own taste and wallet, then when choosing a door for a bathroom and toilet, operational properties become the most important criterion. This is due to the fact that in addition to external beauty, compliance with the overall design of the room, the quality of the canvas, the door to the bathroom must be moisture resistant, withstand temperature extremes and condensation. In addition, the product must maintain the privacy of the room.

Material selection

Regardless of whether you choose an interior door or a bathroom ceiling, the types of products differ in the material from which they are made.

• Wooden array;
• Veneer;

• Ecoshopon;
• Laminatin;
• Plastic (PVC);
• Glass.

A popular type of material for the production of doors is MDF panels. They are universal: suitable for any room, available in a huge variety color options, can be decorated with glass or mirror inserts. The advantage is acceptable average price and high resistance to external influences. Among the shortcomings, the tendency of MDF to accumulate moisture is often called, however, the presence of sufficient ventilation in the bathroom will not allow the floor to be deformed because of this. For the bathroom and toilet, they usually select the facade of the product with a concise finish that does not distract attention from the main design of the room (tiles, plumbing, furniture).

Doors are environmentally friendly from solid wood. Despite the rather high cost, such models are very popular: they are durable, reliable, outwardly attractive, do not require additional finishing and fancy jewelry. For use in the bathroom, larch, oak, beech will go. Pine is excluded: due to low resistance to moisture and temperature fluctuations, such a canvas will quickly swell, deform and become unusable.

The above types of wood, coated with wax or varnish, acquire water-repellent properties and are quite suitable as a ceiling for the bathroom and toilet. To maintain the visual appeal and increase the life of the door, it must be carefully looked after.

An alternative to wooden doors are veneered canvases. Veneer is a thin sheet of wood glued to a fiberboard canvas, while preserving the natural color and structure of the tree, the structure itself becomes lighter, and the price is lower. because of natural origin veneer is very sensitive to moisture and temperature changes. Most manufacturers of veneered doors do not recommend the use of such structures in rooms with a humidity of more than 60% and a maximum temperature above 35 degrees Celsius.

Ecoveneer, unlike its natural counterpart, is an artificial material that only imitates the pattern and relief of a tree. In fact, it is a multilayer plastic, characterized by wear resistance, impact resistance, and moisture resistance. This material is perfect for the bathroom. The eco-veneer door does not require complex maintenance, it withstands temperature and humidity fluctuations. In addition, a clear advantage over natural veneer will be a lower cost.

Not all laminated doors are suitable for the bathroom, but only those in the production of which a special durable PVC film thicker than 0.5 mm or two-color laminate.

Such canvases are inexpensive, easy to install, not pretentious in care. Cheaper products are coated with cellulose and impregnated with resins, which is not environmentally friendly, short-lived and absolutely not moisture resistant.

A great choice for a bathroom plastic door or a polyvinyl chloride (PVC) door. It is light, durable, non-flammable, due to the substances included in the plastic, it is resistant to the appearance of mold and fungus. Among other things, it does not absorb moisture, is resistant to condensation. To increase the elasticity of the material and prevent deformation plastic doors equipped with an aluminum profile. It is a mistake to believe that the color scheme plastic products limited: today the range is quite wide, options with glass inserts are also possible.

A stylish element of the interior can be glass doors. Despite the high cost, their advantages are obvious: they are elegant in appearance, have high rates of environmental friendliness, moisture resistance, wear resistance. As a frame for the door structure, an aluminum profile can be used, which has rigidity, does not allow deformation, and is resistant to corrosion. When choosing such a door, you should pay attention to outer coating surface to protect against condensation. If there are children in the family, the glass door must be reinforced with an armor film.

The glass door is perfect for the shower niche in the bathroom. As a rule, they are made of heat-treated glass. A special charm to a glass product will help to give various color pigments used in the manufacture of canvas, decorative textured film or varying degrees of haze, translucency.

Not only a designer, but also just a craftsman in an ordinary apartment will be able to create a unique and at the same time practical and comfortable interior with a glass door without much difficulty.

Kinds

Doors to the bathroom and toilet differ in their design features. It is necessary to dwell on the advantages and disadvantages of various models.

• Swing. The well-known classic swing structures have a number of positive qualities: standard sizes, ease of installation, a huge selection of finishes, affordable price. Separately, there is the issue of using a threshold that increases heat and soundproofing properties doors. A significant drawback may be the lack of free space. If saving space in the apartment is a priority, you should look at other options for interior floors.

• Sliding and coupe. Sliding doors and compartment doors are essentially similar: when opened, they move to the side. The difference is that the coupe has one canvas, and the sliding structure consists of two halves. Retractable systems on rollers will stylishly and originally complement the interior of the room, saving space near the bathroom. But when installing doors of this type it is necessary to provide for the absence of sockets, shelves or hooks along the wall. In addition, the impossibility of installing a threshold for such structures is a critical drawback, because it reduces heat permeability and sound insulation.

• Folding. A folding door will help to organize a narrow space near the bathroom ergonomically. They are available in two versions: "accordion" (3 or more parts) or "book" (two parts). Such a design solution does not require free space either near the door or near the wall, however, when folded, the structure leaves a rather narrow space inside the doorway for entry and exit from the room. This is worth poor soundproofing and a rare presence in outlets quality models of such doors.

Do not forget about the decorative qualities of the doors to the bathroom. To ensure a harmonious combination with the interior of an apartment or house, you can use mirror or glass inserts to finish the door leaf. The bathroom is not complete without a mirror, and if you place one on the door, you can visually expand the usually cramped bathroom.

When choosing a full glass door, it is logical to use a frosted or tinted canvas to ensure the privacy of the room. Matte folding doors also look original.

Dimensions

It is a mistake to believe that the dimensions of the doorway to the bathroom do not really matter. Undoubtedly, the bathroom belongs to the premises with complex performance characteristics. Constant temperature fluctuations, high humidity, accumulation of condensate and steam, as well as a number of other negative factors adversely affect Decoration Materials, including the door frame. The protection of residential premises from the spread of dampness, microorganisms, mold depends on its quality, therefore, it is necessary to pay due attention to the competent selection of the size of the interior ceiling to ensure high-quality housing care. In accordance with accepted standards, the dimensions of interior openings should differ in the same dimensions. The height of the product is 2 m, and the width can be different: 60 cm, 70 cm, 80 cm, 90 cm. Wider doorways are non-standard according to GOST.

Narrow openings (60 cm) are typical for typical Soviet buildings of the "Khrushchev" type. In new buildings, most often the width of the doorway is 70-80 cm, taking into account the needs of residents in the installation of household appliances, plumbing, metal and decorative elements, which simply cannot "pass" into narrower openings. Installing a modern plumbing equipment, such as a shower or jacuzzi, often requires a wider door (80-90 cm).

The use of a canvas wider than 90 cm is justified only in exceptional cases of design ideas in large spacious houses. In a standard apartment, such a wide door overlap violates the comfort and overall harmony of a small bathroom.

Color

To create a harmonious design of the living space, it is necessary to carefully approach the choice of the color of the door panels. It is generally accepted to install all interior floors in an apartment of the same color. This approach is classic: plain doors will not violate the aesthetics of the room, they will succinctly fit into general style and won't draw too much attention. It is allowed to use two shades of doors in the interior, but in any case, the same colors should be selected for the toilet and bathroom.

• For many years of use in the design of bathrooms, white doors have performed well. They are universal for any size room: in small apartments or spacious houses, snow-white doors will create an atmosphere of cleanliness, freshness and accuracy, in harmony with the color of plumbing. Due to the fact that White color does not form clear contours and, as it were, radiates light, a feeling of comfort is created in any area.

• Coated doors are among the most attractive and in high demand. amber oak. Among the huge range of door designs, they have an elegant aristocratic design and will fit into various style solutions.
• Ideal for modern interior Door dark color. Against the general light background of the bathroom finish, the wenge shade door will become an expressive accent. Attractive models with glass or mirror inserts will add a touch of luxury to even the most neutral design. A solid door leaf in black or dark brown shades will help streamline the space, making it more geometric and concise.

• Help create a mood colorful door. It is appropriate to bring a touch of dynamism and brightness to the design of the bathroom, because it is here that the mood for the whole day in the morning and moments of relaxation in the evening take place. bright element will help to cheer up, cheer up. The strict design of the bathroom allows you to experiment: a sea wave, bright crimson, turquoise- the shade chosen to your taste can be successfully entered into the overall idea. double door - perfect choice if you are confused by the question of how a rich door will look in the corridor. On the one hand, the facade complements the interior of the bathroom, and on the other, the corridor.

Design

After choosing a color, you can think about additional decor for the doors. In the decoration, inserts made of wood, plastic, metal, glass or in the form of a mosaic and with a sandblasted pattern can be used. Each door to the bathroom and toilet can be unique and unrepeatable in its own way. At right choice they will add a sense of elegance and sophistication to the space.

Connoisseurs of non-standard solutions in the decoration of the apartment will be interested in the option of using hidden doors, with which you can distract attention or even hide any room from prying eyes, including a bathroom. Invisibility is achieved due to the ability to process the front side for any texture, style and color of the walls of the room. On such doors, you can easily apply plain paint or part of the landscape, paste them over with wallpaper (rolled, washable, paintable, photo wallpaper).

A tile finish is possible if the entrance to the bathroom is located from the side of the tiled kitchen. A similar solution applies to veneer and other decorative materials. A secret door will harmoniously fit into a minimalist style room, because it does not stand out against the background of the walls or looks like only a decorative element.

For creative housewives who always want something special, you can offer to decorate the door to the bathroom on their own using the decoupage technique. it best option for those who love needlework, while not wanting to overpay for expensive decor. From paper, most often from napkins, interesting pictures or patterns are cut out, forming a panel, which is then glued onto the surface to be decorated. The resulting picture can be supplemented with improvised materials such as beads, beads and the like. With a certain amount of imagination, perseverance and skill, you can create a real masterpiece that will surprise and delight guests and household members with its originality.

Which is better to choose?

Given the characteristics of the premises, to prevent the formation of condensate, fungus and mold, it is worth thinking about ventilation. If natural ventilation is not enough, it is possible to provide for the presence of special grilles in the door leaf itself, or (less desirable) install them after. In addition, an extractor hood is often installed in the bathroom, which provides air exchange: warm air comes out, cold air takes its place.

When choosing which door to put in the bathroom, you need to know that the correct opening and closing is guaranteed only when buying a product complete with a box. If you tend to choose a hinged door, which is characterized by the complete absence of a lower rail, remember the need for high-quality fittings, because the comfort and safety of using the structure directly depends on it.

Remember that the undoubted plus in the form of ease of installation of this type of sliding door may not be so valuable, given the fragility of the system as a whole. If you use standard interior doors for the bathroom, supposedly simplifying your task of choosing, you can overpay after 3-4 years, when an illiterate canvas that does not meet the characteristics of the room becomes unusable and will have to be changed again.

Adherents of stylish unique interiors choosing mirrored doors for the bathroom, we recall that they can be not only flat, but also have a rounded shape. You can emphasize the uniqueness of the design of the room, using the design according to the geometric features of the doorway of the bathroom.

Famous manufacturers and reviews

There are many manufacturers, domestic and foreign, on the market for interior floors. Among Russian firms, the following stand out:

"Sophia"

Well-known factory, has been manufacturing doors for over 20 years, has a large number of awards, is one of the recognized leaders in your industry. The production uses modern high-tech equipment that allows to produce high-quality doors in accordance with high international standards. Judging by the reviews, buyers agree that despite the high cost, buying Sophia doors is still worth it, because it’s not a pity to pay for excellent quality, durability, beauty.

"Dera"

High-quality and inexpensive doors, produced in Penza for more than 20 years, have won their niche among the leading companies. As a full-cycle manufacturer (from logging to door installation), the company also offers warranty and post-warranty service for manufactured products. Due to the low cost of good quality interior floors of the company "Dera" are popular, and have earned positive feedback from buyers. Beautiful design, wide selection are also noted by customers, however, the production time is often disrupted and delayed.

"Alexandria Doors"

Manufacturability and innovative approach is the main principle of this company. Products manufactured at the factory in Ulyanovsk meet European quality standards. Door leafs are made from natural and high-quality materials. Impeccable quality, sound insulation, compliance with the terms of the contract - such advantages are noted by the buyers of these doors.

At the same time, not always competent work of installers upsets, sometimes negligent attitude towards customers.

"Volkhovets"

The door according to your individual project can be made at the Volkhovets factory. Production is located in Veliky Novgorod. Quality, the widest range with an adequate pricing policy contributes to the popularization among buyers of the doors of this company. The attitude towards customers, the quality of installation, but in general, there are no complaints about the doors themselves are not always pleasing to the buyers of the Volkhovets company. Choose a reliable dealer - and the pleasure of buying will be complete.

Foreign companies offer avant-garde developments and, thanks to the use of innovative technologies in production, are in demand among buyers.

Casali

An Italian factory that produces doors of exceptional quality and unique design. top class glass doors from Italy will bring zest to luxurious interior premises, becoming its main attraction. Craftsmanship and unsurpassed quality in working with glass doors and partitions pleases the company's customers. Striking stylistic possibilities of forms and drawings, staggering the imagination, attract the happy owners of Italian doors.

Via Plast

Manufacturer from Ukraine, specializing in the manufacture of metal-plastic structures. Plastic doors, produced in accordance with high European quality requirements, have a unique style and design. The company offers products of various models, sizes, shapes and shades. The organization of the production process of the company keeps pace with the leading European manufacturers. There are not so many reviews about the doors of this manufacturer, in general, customers who are dissatisfied with the service write about the company more often, who, in fact, do not make claims about the quality of the products.

rehau

The largest German company, for which the production of doors is one of the areas of development. For the manufacture of high-quality products, our own high-tech developments are used. Rehau doors are presented in both classic and modern design, high quality and reliable, they will serve you for a long time and provide comfort and ease of use. The most famous company is not distinguished by a lack of reviews, the quality of its products has been appreciated by buyers for many years.

Comfortable, reliable, practical - the main characteristics of German designs.

Successful examples and options

New and unusual material manufacturing doors (composite) is unique in its characteristics. It can also be used as a ceiling for the bathroom, because the material for the manufacture of the frame of the product is a durable, dense and moisture-resistant polymer. Currently, it is more often used for the manufacture of entrance doors.

• Properly approaching the repair of the bathroom in the "Khrushchev" you can create a cozy harmonious room that meets your needs and individual taste.
• A white door in the bathroom combined with white furniture and fixtures will give the room a feeling of cleanliness and freshness.

• A stylish frosted glass door will add individuality and chic to both a small room and a spacious bathroom.

Replacing the doors in the house is a serious undertaking that requires a balanced approach. Special attention should be given to wet areas. Not all materials can be used there. Choosing doors for the bathroom and toilet is far from easy, as many nuances must be taken into account.

Requirements

Doors to the bathroom and toilet are chosen not only in appearance. Their properties must also be taken into account. In bathrooms, high humidity is not uncommon, so moisture resistance is important characteristic. Equally important is the good tolerance of wet cleaning. This is another selection criterion. Durability and reliability are also important. Also important are properties such as sound insulation and low thermal conductivity. In the bathroom, we feel comfortable at a higher temperature, and it is easier to create it with a door that has good thermal insulation.

There are also technical nuances. According to building standards, the doors to the bathroom and toilet can be made narrower than to living quarters. This is exactly the situation in apartment buildings. In private houses and cottages, this rule is rarely followed, and even during repairs, or often, doorways of ordinary sizes are also made.

There is another nuance. Well-functioning ventilation is required to quickly remove moist air. It can be natural or forced (with a fan), but for it to work well, the bathroom must have an inflow fresh air. To open access to air, the door leaf is made 1.5-2 cm shorter, leaving a gap in the floor area. It just sounds scary, but in practice this gap is almost invisible. The second way to ensure air flow is through special ventilation grilles that are built into the door leaf. And the third is the supply holes in the wall. Of all the options, it is the idea with a gap near the floor that is the least striking. It is also the easiest to implement.

What are the doors for the bathroom and toilet

Even the most ordinary doors are placed in the bathroom and toilet - wooden or paneled (wood frame with plywood inserts), painted with paint. With well-functioning ventilation, they serve well, only few people like them. Therefore, they prefer to replace them with new, more modern ones.

Wooden and veneered

Solid wood doors are undoubtedly beautiful, but also expensive. They are placed in a damp room if they are covered with a layer of varnish. In this case, manufacturers in the description usually indicate that they are "waterproof". Subject to use good varnish and its competent application, the coating protects against moisture and is well washed. If necessary, the varnish layer can be updated, although this operation will not be required soon.

Veneered doors are made from inexpensive low-grade wood, and then pasted over with expensive veneer. A veneer is a thin saw cut of a tree - a few millimeters thick. The presence of glue makes veneered doors not quite "natural", but at the same time protects the wood from swelling. However, veneer doors for bathrooms and toilets are not the best choice, because the veneer is not airtight, moisture penetrates into the smallest cracks, which causes the surface to warp and the veneer begins to peel off.

Wooden doors- expensive and beautiful

Not so long ago, doors finished with euro veneer appeared. This is a new material consisting of wood and a binder. Colored wood fibers are mixed with a synthetic binder. This mixture is forced through a powerful press and comes out in the form of a ribbon. In appearance, the resulting material is practically indistinguishable from natural veneer, and surpasses it in performance properties. Doors finished with euroveneer are not afraid of high humidity, the coating has high mechanical strength and does not fade in the sun. You can distinguish them by touch - too smooth coating.

If we talk about other characteristics, it can be noted that wooden and veneered doors for the bathroom and toilet have low thermal conductivity and protect well from noise. They tolerate wet cleaning, but with a soft cloth and without aggressive detergents.

Plastic and metal-plastic

Plastic doors to the bathroom - an economy option. They are inexpensive, they are not at all afraid of water in any of its conditions, they are not deformed by high humidity. Their disadvantages are that they are made from unnatural raw materials, inexpensive models have low mechanical strength. It is also worth remembering that they cannot, like wood or veneer doors, be “fitted” to the desired size.

Plastic is a good material for wet areas

Metal-plastic doors in the apartment bathroom are rarely installed. But not because they don't fit. Rather, they are not used for aesthetic reasons - their appearance is very different. If doors made of other materials are installed in other rooms, it is very difficult to choose a more or less suitable color. Another deterrent is the high price. And the features are better than you can imagine.

glass

Glass - not very popular as doors, but has good characteristics. It does not react to water and high humidity, it does not rot and you can wash it as much as you like. They have one drawback - fragility, but modern technology has overcome it - the glass is made tempered, which gives it increased strength. There is also laminated glass (duplex and triplex). This is when sheets of glass are glued with a reinforcing film.

It is possible to break a glass door leaf, but it is difficult to do it, and if it does, the glass breaks into many small fragments with smooth, not sharp edges. In the case of laminated glass, the fragments hang on the film, and the tempered glass simply breaks into small fragments, but you have to try hard to get hurt by such fragments. The only trouble from such an event is the need to buy a new door.

Glass door leaf can be colored

Glass doors for the bathroom and toilet are made opaque. They are tinted, can be mirror coated or stained glass painting. All that is visible through such doors is a blurry silhouette and no specifics. In general, a good option if the family does not have small children.

Laminated and PVC

Another inexpensive option for bathroom doors is laminated film. The door leaf itself is made using frame technology. The frame is made of pine timber, the gaps are filled soundproof material(the cheapest ones are corrugated cardboard, the more expensive ones are polyurethane foam), after that they are sheathed with laminated fiberboard or MDF. The surface of the door can be decorated to look like wood, it can be smooth (much less common).

The door leaf is light, but it does not tolerate shock loads very well. With good quality lamination, such a door to the bathroom and toilet is not afraid of moisture, and it is washed well (with a damp soft cloth with liquid non-aggressive detergents). As long as the lamination remains intact, it looks quite decent. At intensive use the film is erased and the appearance deteriorates noticeably.

PVC bathroom doors are made using the same technology. The only difference is that the frame is sheathed with extruded PVC. The density and strength of PVC are many times higher, so the durability is also higher. Better and performance: vinyl is not afraid of water in any form, so for the bathroom and toilet it is a great option.

Combined

When they say combined doors, they most often mean that they have inserts of a different material. And most often it is glass inserts. Glass sizes can vary greatly. It can be a narrow strip along one of the edges or a large piece for half the door. Glass is also used opaque, tempered or laminated. If the glass in the model you like is too transparent, you can stick a self-adhesive stained glass or translucent film on it.

Combined options - the most interesting in terms of design

Glass inserts are made in wooden, metal-plastic and veneered doors. Less often - in MDF and almost never - in plastic. But the most interesting design models are found in this category - more room for imagination.

Opening systems

Except different materials bathroom and toilet doors can have different types opening. The usual option for us is swing doors. They are good for everyone, except that in the open state they cover a solid gap of space.

becoming more and more popular in recent times. This is when a bar is attached to the top of the door, rollers are attached to the door leaf, the doors roll along this bar. According to the method of mounting the guide, sliding doors are open and secret. Open - when the bar is attached to the wall on one side, and the canvas rides along the wall. With a hidden system, a niche is made in the wall into which the door leaf drives in.

The second option in the open form takes up almost no space, but during installation it requires serious intervention in the wall structure, which is far from always possible. It is unlikely to succeed in concrete or even brick wall hollow out a niche of the desired size. Then, in order to hide the canvas, they build a false wall of drywall.

The disadvantage of sliding doors is a more complicated installation, and open systems have a low degree of sound insulation (the canvas simply hangs along the doorway, solid gaps remain). In secret systems, everything is better in this regard - there are door frame, with a groove into which the door leaf enters and a seal in this groove. Such systems have good sound insulation, but are expensive.

Folding - accordion (right) and book (left)

Another view. There are two types - "book" and "accordion". Doors-book have a door leaf, consisting of several parts. These parts are movably connected; when opened, they fold, resembling a book. Accordion doors have a similar structure, but fold differently: relative to an axis passing through the center. Book doors are often made of glass, they can also be made of MDF or plastic, in accordion doors they are often made of plastic and they cost a little.

Interior doors to the bathroom are not made of brick and concrete. They are not cast from iron, they are not cut out of marble and malachite. Everything you see in stores is wood, only in different technological and decorative arrangements. The usefulness of the doors in the apartment could not be surpassed even beautiful arches. And if for the living room and bedroom we choose the most beautiful, then for the bathroom - beautiful and moisture resistant.

Ordinary situation: after prolonged adoption hot bath humidity in the room approaches 100%. The first material that will take the powerful blow of condensate is wood. An increase in wood moisture will first be reflected by a change in its physical properties, and after the appearance. In particular:

• mechanical strength will decrease: the door will become susceptible to deformations;
• thermal conductivity will increase (perhaps this is not so important for the bathroom door, but still);
• electrical conductivity will increase;
• the density will increase and the door will become heavier, which will create an additional load on the hinges;
• the main thing is that wood will become a hospitable home for fungi and bacteria.

How to choose the right doors for the bathroom in order to avoid all these negative consequences, you will learn from the article, which was prepared for our publication by the store's specialists. interior doors"To the house."

What materials are absolutely not suitable for bathroom doors?

A door made from highly moistened wood, especially from its cheap varieties or pressed sawdust, will last an average of 4 years. It is not entirely correct to talk about choosing a specific material for making a bathroom door.

We could now (as many do) provide data on how oak, pine, ash behave in a humid environment, describe the advantages and disadvantages of each, perhaps even do it later, but this will not move us closer to the answer to the main question What type of wood door can be installed in the bathroom? Because:

the susceptibility of the door to moisture depends on the characteristics of the tree, and on the chosen method of protection, and on the quality of its implementation. Given that finishes are the first and main barrier to moisture penetration, it is the coating that plays an important role when choosing a design for rooms with high humidity.

Interior doors with the most quality coatings You can choose from the catalog by clicking on the link.

We propose to talk about this in more detail.

Ways to protect the interior door from moisture

Protection of wood from moisture, fungus, insects is commonly called preventive. This is a whole range of measures, which includes:

• selection of high-quality "healthy" wood without knots, bast, bark;
• drying in compliance with technological nuances;
• proper storage;
• competently performed deep processing with the use of impregnating compounds;
• lining from wood materials and films;
• usage chemicals protection with pronounced decorative properties.

Wood protection with impregnating compounds is divided into 3 types:

• superficial;
• marginal (means penetrate into the thickness by 3-4 mm);
• deep (impregnated to a depth of at least 10 mm).

In the factory, the compositions are applied by immersing the workpieces in a bath, by placing them in a boiler under pressure, or by creating a vacuum environment.

For deep processing, a large group of chemicals, otherwise called impregnations, is used. Most of the compounds simultaneously act as water repellents and protect the tree from the harmful effects of insects. Such materials contain biocidal components that act on the microorganism as toxins.

For surface impregnation of wood use:

• stains;
• wax;
• oil.

Mordants steal on a cleaned primed surface. They are used where it is required to preserve the natural pattern of the tree, to make contrasting transitions.

Wax treat clean surfaces. The composition penetrates into the deep layers of wood, does not clog pores, while maintaining the ability of the material to “breathe”. Depending on the desired result, wax colorless or with a toning effect is chosen. It gives the door a beautiful color - from natural light to rich red or black "wenge".

Oil- linen, tung, fir, tar, etc. Safe, inexpensive and efficient view processing, but not durable. Coverage will need to be renewed every six months.

Protective and decorative finishing materials

Three varieties:

• natural veneer;
• films (PP, PVC, eco-veneer);
• wood boards (chipboard, MDF, plywood).

Natural wood has a lot of defects. People have realized that the performance is greatly improved when, instead of a full-bodied tree, blanks are used, divided into layers or fibers. They don't shrink. By itself, the problem of suppressing the difference in internal stresses disappears, since the fibrous structure is broken.

It is easier to create three-dimensional structures with a large area from a layered fibrous material. It is also the basis for any interior doors, incl. for models made of solid wood, veneer, chipboard, MDF.

Veneers

Covering veneers are used in the production of interior doors. They are also called facial, because they are applied to facades as finishing decorative coatings. Veneering has 2 goals:

1. Significantly reduce the price, leaving the unshakable beauty of natural wood.
2. They save materials: one tree can be dissolved into layers and used in the production of 5-10 veneered doors, and in the case of solid wood structures, no more than 2-3.

Veneer is the same tree, which means that it needs protection to enhance moisture resistance. The thinner the veneer, the worse its quality. On average, it is 0.5-1 mm. There is veneer with a thickness of 1.5 mm or more, but these varieties are rarely used for decorative purposes. They are called lockers. They protect wooden structures from shrinkage.

The best in terms of price and quality is considered natural veneer. The beauty of the material will be preserved for a long time if the cut of wood is glued to the substrate. It is applied to the surface by pressing. Next, the surface is sanded, primed, tinted or varnished, thereby giving decorative properties and protecting it from moisture. Therefore, veneered bathroom doors can be installed.

Care should be taken when choosing models from inexpensive fine-line veneer with a restored pattern (from poplar, maple, aspen). Pay attention to the quality of pasting. Check for defects and flaking. Make sure all surfaces, including edges, are covered with tape. Any millimeter play will eventually become a conductor of moisture to the inner layers. This bathroom door is not suitable.

Fiber boards

The product line is extensive. In total there are more than 10 titles. In the production of interior doors, semi-dense or semi-hard mineral wool boards with a very smooth surface, which are better known as MDF, have taken root.

Plates are used in the production of deaf and paneled doors. They reduce the cost, weight of models, increase water-repellent properties. Such doors are veneered or covered with films, achieving 100% water resistance. MDF doors are suitable for the bathroom.

Laminated doors - laminate, PP, PVC, eco-veneer

These are doors “dressed” in films… Different. The answer to the main question depends on their quality and ability to absorb moisture.

This includes:

• Laminated doors: the cheapest and most short-lived. Cellulose-based coating cannot have high strength and moisture resistance. Install in the bathroom, especially if there is no powerful ventilation, we do not recommend, because it is not for long.
• Ecoveneer: film based on polypropylene. It has good protective properties. Continuous contact with moisture in an environment of constantly changing temperatures is allowed if the build quality is impeccable.
• PVC: 100% hit. The polymer protects against water effectively, does it throughout the entire service life. Here, too, the quality of the finishes comes to the fore. There should be no chips, cuts, blisters on the surface.

paintwork

Coloring is done with water-based acrylic compositions. Mostly decorated with veneered doors. The coating is opaque, the desired color. To protect against moisture, preliminary priming and stain treatment are carried out. The translucent coating serves as a reliable barrier to water drops and condensate. Painted doors are suitable for installation in rooms with high humidity.

Under the enamel is usually hidden natural wood. The coating, like a thin sarcophagus, protects the models from the array from negative environmental factors, including sharp, piercing objects, animal claws, shocks and water. Enamel is applied in a special chamber. The process is long and laborious. To give the enameled door decorative properties, painting and patination are used.

Moisture resistant and very fashionable glossy doors today. The procedure is carried out in several stages. Each application alternates with careful polishing.

Conclusion: water sharpens a stone, and it is many times stronger than a tree. Only natives of the tropics - such as kusia, ipe, kumaru, etc. - do not succumb to the negative influence of moisture. There is no need to overpay for the exotic, because "native" rocks or their inexpensive substitutes are suitable for installation in the bathroom, but provided that the material is well dried, has undergone deep processing, is made according to the “correct” technology and is protected by the appropriate composition or coating. An exception can only be laminated doors at a price of up to 2-3 thousand rubles.

The door to the bathroom and the type of wood - what is the optimal ratio

Each type of tree reacts in its own way to frequent changes in temperature, humidity in environment. The more stable the breed, the more durable it is, and therefore more expensive. Most door industries in Russia are tied to five domestic breeds:

• oak;
• ash;
• beech;
• alder;
• pine.

Is it advisable to install a door to the bathroom from the listed types of wood?

Oak

The wood is hard, heavy, strong, resilient and durable, therefore expensive. Practically does not create shrinkage, well absorbs coloring compositions.

Areas of application - construction of houses, baths, entrance doors, stairs, floor coverings, construction of bridges, hydraulic structures, etc.

Oak bathroom doors? - Yes.

Ash

Technical properties - high hardness, elasticity, abrasion and bending strength, high weight and toughness. Minimum shrinkage, the service life of the product, subject to preventive protection measures, is 20-30 years.

It absorbs stains, paints, polishes well. Spheres of application - finishing of ceilings, walls, production of stairs, floor coverings.

Ash bathroom doors? - Yes.

Beech

Advantages - hardness, viscosity, strength, pliability for processing with stains, impregnations. The steamed material bends easily, but with increasing humidity it quickly cracks and deforms.

Areas of application: production of stairs, parquet, timber, plywood, fiber-bonded materials.

Beech bathroom doors? – Rather, no, or only with very careful processing.

Alder

Compared to pine, it has high density, hygroscopicity. For protection, careful deep processing with waxes, primers, enamels and varnish is used. Suitable for cladding walls, ceilings in bathrooms. It does not get very hot, it prevents burns, therefore it is suitable for finishing surfaces in baths and saunas.

It has a beautiful appearance, luxurious cognac color and aroma.

Alder bathroom doors? – Yes, but when using dense protective compounds and several levels of treatment with primer, enamel, varnish.

Pine

Easily processed. Contains a lot of resins, which increases the life of the tree itself and its products. It is important to carry out a thorough treatment with impregnations, otherwise the susceptibility to a negative environment will be reflected in a change in properties and color - the wood will acquire a bluish tint.

Applications: windows, doors, masts, stairs, floor coverings, etc.

Pine bathroom doors? - Yes, with high-quality impregnation.

We advise you to buy solid wood doors only from trusted suppliers, preferably after reading the reviews about these products. In any case, wood is a capricious material, and the manufacturer must accumulate certain experience, which will be indicated by positive recommendations.

You can read reviews, see photos and prices in the catalog of doors from the array of the V Dom online store.

How do ventilation grills and heated towel rails affect the “behavior” of the door to the bathroom?

The desire to protect the door to the bathroom does not allow you to sleep peacefully? Try with traditional methods and careful attention to the choice of material to use preventive techniques to combat moisture.

The ventilation grill does not always ventilate properly. The issue of condensate and black mold is especially acute in old panel high-rise buildings. The ventilation system in such houses does not work well (you can check it - put a sheet of paper on the grate. If it falls, then there is no hood). Try to install a fan in place of the grille, and not an ordinary propeller, but modern model with motion and humidity sensor.

The device will turn on as soon as the humidity concentration in the room reaches an acceptable threshold.

Correctly calculate the required fan power. To do this, the volume of the room (length ×width ×height) multiply by a factor of 6 or 8, depending on the number of people using the bath and shower - up to 3 and more than 3, respectively.

Compensate for the lack of normal exhaust ventilation You can install a heated towel rail. It is advisable to take electric model with a thermostat so that the operation of the equipment does not depend on the presence of a coolant in the system. The appliance will turn itself on and off, saving resources and your utility bills.

The "warm floor" system will help maintain optimal parameters of temperature and humidity. The natural process of heating the air occurs along the trajectory from the bottom to the top. By increasing the air temperature in the lower part of the room, you will equalize the general temperature background in the bathroom, thereby creating a favorable microclimate for wood.

Last resort! If for some reason none of the above methods is suitable to eliminate excessive moisture in the bathroom, you can leave a gap between the door and the floor (for example, remove the threshold). One open window in the apartment will be enough to create a draft. The air in the room will circulate intensively, distilled from the ventilation grill to the open window.

Swing, sliding or folding bathroom door - which is better?

The door to the bathroom should not create discomfort. Even if you like a sliding design, it is not suitable if the bathroom is separated by thin partitions on one side from the kitchen, on the other - from the bathroom.

Try to make sure that the negative from the high humidity in the bathroom does not affect the neighboring rooms. A hermetically closed door will save the situation and will not allow condensation to settle on the mirrors and glass in the hallway, on the walls, on the front door.

Convenience, hermetic closing, space saving - these are problems that will have to be solved with the right choice of door. We suggest considering which of the designs will cope with them in the best way:

1. Swing.
2. Sliding - on rollers or "in a pencil case".
3. Foldable.
4. Roto door.

Swing door to bathroom

The most common option. The hinged door, like no other, provides an almost hermetic delimitation of the bathroom interior from the surrounding areas. The main thing here is not to make a mistake in the direction of opening: if the entrances to the bathroom, bathroom, kitchen or other rooms are on the same or adjacent walls, let them open in one direction - either all to the right or to the left. Otherwise, one open canvas will interfere with another. As a result of constant blows against each other, chips will appear on the surface, and these are ready-made moisture bridges and a direct indication for repair.

Hinged door fittings are the most common. Installation is fast. Hermetic closing will ensure silence in the house when water is noisy in the bathroom.

Sliding bathroom door

They are divided into 2 types:

• on a roller mechanism;
• in the "penalty".

Both models open easily, save about 1 m of space in front of them, and look original. This can be fixed in one position and left ajar for ventilation.

But - we recommend choosing a sliding system if other options are less rational compared to it. You will have to pay more for it than for a swing, if only because fittings with locks are more expensive. Installing the structure is not easy, especially if required concealed installation"in the pencil case", which also contributes to the rise in price.

The stop factor for sliding doors will be the lack of sufficient free space on the adjacent wall. Ledges, other doors, shields, sconces will interfere with the movement of the canvas. Please note that neither the roller nor the foam systems are leaky, so some of the moisture will come out.

If you choose between rollers and a pencil case, then the first is cheaper and more convenient, for example, in terms of maintainability and replacement. If the canvas gets bored, you can install another one on the same fittings.

The “pencil case” is installed if there is at least 1 meter of free wall on both sides, and about 30 cm is left in the upper part for installing the cornice.

Good solutions for sliding system"in the penalty box":

1. Independently expand the opening to the desired size.
2. Replace double door.
3. Install a false wall yourself, where the canvas will move.

Do not save on fittings, because it will have to work in conditions of high humidity. Make sure it is made of stainless steel or has an anti-corrosion coating.

Folding bathroom doors

The designs are folded into an accordion or into a book. They also save space, while not requiring free meters around them, because even when open they remain inside the opening.

In the pros - originality, ease of opening, tightness. In the minuses - the high cost of components, expensive installation.

Doors to the bathroom

Conveniences combined in one system sliding door and swing reliability. The canvas opens in any direction. The model works like a pendulum mechanism. The bearing link is the axis installed in the center of the opening. When opening, the canvas swings open and moves to the side. It turns out that when open, part of the door protrudes into the next room, and the other half remains in the bathroom.

Pros - beauty, exclusivity, convenient operation. Cons - high cost, constant exposure to moisture on expensive fittings. You should not take risks and choose a mouth door if the opening is very close to the sink or bathroom.

Door sizes - what are they and how to choose the best one in terms of quality and price

You want to change the doors to the bathroom or bought a house without interior decoration, incl. no internal doors. Your task is to find a structure (or several) that will fit into the openings. You measured the length, height, diagonals. The further scenario may develop in different ways:

• The opening corresponds to the dimensions of GOST (190 cm by 55-60 cm or 200 cm by 60-90 cm).
• The opening is too high or too wide, or both.

With the first situation it is easier: everything is here - big choice colors, textures, decor, materials, price range - from 1900 rubles. up to 100,000 rubles and higher.

If the doors do not fit into the standards, you will have to think about where to buy them. Option 2:

1. Find a factory where the production of doors with non-standard sizes is put on stream.
2. Call the measurer and make an individual order.

The first method is profitable, because it is fast and economical. If the factory line is wide enough, which includes high and wide models, then they are most likely in stock, or their production will take the same time as the production of GOST structures.

The advantage of the second option is the ability to order a door with an exclusive design, but such a product will cost 2-3 times more. Production will stretch for a month, no less. Not to mention the need to manufacture several identical models, the outer side of which will go into one hall or living room.

If there is no manufacturer in the city with a wide dimensional range of doors, try to fit the opening to accepted standards. For example, expand or narrow it. You may not win much in price, but solve the issue of choosing a bathroom door once and for all. If the canvas does not fit 2-3 centimeters, you can carefully trim it from above. The method is not suitable for film structures, but it will solve the issue of installing non-standard doors from an array.

Moisture resistance and strength of the door depend on the selected material and its protection. For easy opening, the absence of drafts, cracks, distortions, for holding a large weight load, the fittings are responsible. During the day, you can never open the door to the bedroom or living room (and why, if they are always open). Each member of a family of 3 will open the door to the bathroom at least 5 times, or even more if it is a combined bathroom or is standing there washing machine. The reliability of fittings, as well as its anti-corrosion properties, come to the fore.

How to choose hinges and locks - a few tips.

What kind of lock to install on the bathroom door

Let's start with the simplest latch. It is economical and familiar, easy to apply to the surface. No through hole required. We do not recommend installing a latch in apartments where there is Small child, or make it as high as possible so he can't lock himself inside.

plumbing wrap- This is a common but simplified mortise lock. The kit includes a latch and a tongue. You close the door - it flies out and stops the mechanism. The wrappers are reasonably priced, but the installation will take a little longer, because you have to work with a drill.

Knob plus wrap- used often and for a long time. A ball-shaped handle is installed at the level of the lock, which adjusts the position of the latch. Set the handle vertically and the door will lock and it will not be possible to open it from the outside. For installation in the canvas, 2 holes are made - through and end.

Which loops are the most durable and strong

Loops have a hard time - in every sense. The weight of a door from the massif can reach 40 and more kg. The load increases due to frequent opening and high humidity, so everything is important in the hinges - material, protection, build quality.

Stainless steel or brass, as well as chromium-nickel plating, will help fight corrosion in a high-humidity environment.

By design, the loops are divided into 3 types.

The simplest - card. They are cheap, fastened to self-tapping screws by lining on adjacent ends.

Look like them mortise hinges. They are not immediately applied to the surface of the ends, but recesses of the same thickness are cut out at the attachment points, planks are inserted into them, and only after that they are fixed with self-tapping screws. The method is more time-consuming, but advantageous in terms of strength.

The most beautiful and expensive are hidden loops. Indentations are made at the end, parts of the fittings are inserted into them. A complex mechanism provides more options for adjusting the web in three directions. The hinges remain inside, they are practically invisible from any side, and this gives the structure an even more spectacular look.

How well the door is installed - how to determine

The durability of the door by 50 percent depends on the quality of assembly and installation. When buying, carefully inspect the seams between the frame and panels, the gaps between the standing parts and the crossbars. Make sure that the glass elements do not “walk” in the grooves, the fastening of the glazing beads and baguette is done in good faith.

See how neatly the seal is glued, if it comes out in places. Tap on the canvas, shake it lightly. Any sound or knock should alert you.

After installation, check the horizontal and vertical position with a level. Open the door, set the canvas at a 45 degree angle to the wall. If the installation is carried out without errors, it will not close, but will remain in the same position. Turn the handles, check the smoothness of the constipation.

Now once again check the integrity of the door covering - did the master damage it in the process of working with a hammer, cutter, drill, screwdriver. Make sure that the integrity of the veneer (film, enamel, etc.) is not broken, only now you can sign the act and accept the work.

Almost every room in our house is equipped with doors. For ordinary living rooms their choice is not particularly troublesome, however, for the shower room, it is necessary to select models that meet the specifics of the room. Doors for the bathroom and toilet are constantly affected by high humidity. Therefore, interior floors must be installed with suitable performance.

They must endure temperature fluctuations, lack of ventilation, negative impact steam, as well as microorganisms. At the same time, the doors to the bathroom and toilet should retain their appearance and perform their direct functions. In addition, it is better to choose interior floors so that they take into account overall design apartments. An additional requirement for doors in the bathroom and toilet is good sound insulation and the ability to keep heat inside the room.

Kinds

The main parameter by which it is better to choose bathroom doors is the material. It is by this criterion that the main conclusions can be drawn on the operational properties of the product. In addition, based on the raw materials, the price of the door to the bathroom and toilet is determined. It may be low or accessible to a few, however, the main requirement for any model is its high quality. After that, a decision is made to purchase doors for the bathroom and toilet.

What kind of overlap is better to put? For the shower, hidden products are definitely not suitable. Modern technologies in their mass of doors to the bathroom and toilet allow you to have no technical contraindications. Installation of doors to the toilet and bathroom is carried out smoothly, quickly and without any contraindications.

But at the same time, the practicality of the material, design, as well as its service life can vary significantly. Why is it necessary to know the advantages and disadvantages of the doors to the toilet and the bathroom, i.e. What interior floors are better to choose?

glass

Bathroom doors made of glass allow you to give the room a very original look. This material is not afraid of direct contact with water or constant exposure to moisture, as well as temperature changes. Glass doors to the bathroom and toilet do not deform over time, maintaining their position in the structure. This raw material is an environmentally friendly product that does not allow the appearance of fungus or mold.

Separately, it is worth noting that such doors to the bathroom and toilet can be installed for their sound insulation, as well as high ability keep warm. From the point of view of mechanical load, the material perfectly withstands all the requirements. These bathroom and toilet doors are produced using tempered glass which has high strength. Thus, it will be very difficult to break it, especially at home.

What kind of glass doors for the bathroom and toilet is better to put? The first thing you need to pay attention to is the combination with the main design of the house. After that, you can select different models based on their color, type, shape or structure. Doors to the bathroom are presented in a wide range. Glass models are:

• tinted;
• various degrees of transparency, matte;
• with a relief pattern or spraying;
• as well as with a mirror surface.

In addition, products with inserts in the form of wood, mosaic, plastic, metal and sandblasted patterns can be used. Separately, it should be noted that the entire composition must have general form design of the entire room. Each glass door to the bathroom and toilet is unique and unrepeatable in its own way. They bring a sense of weightlessness and lightness to the space, so the whole interior seems more elegant.

Glass sliding door

Glass doors for the bathroom and toilet visually increase the space, making it more spacious. In addition, glass models retain access to natural light in the shower. This is especially acute in rooms that are not equipped with windows or have no access to them. The door to the bathroom and toilet made of glass is unpretentious in care, it is enough to wipe it periodically by special means and a regular cloth. The only drawback of the products - high price. Which model is worth paying attention to?

Plastic

Plastic bathroom doors are well suited for rooms with difficult operating conditions. These models are not subject to decay, do not deform over time, and also calmly tolerate the effects of aggressive environments in the form of temperature changes or steam. The plastic door to the toilet and bath has a whole list of advantages:

• hygiene;
• ease;
• reliability;
• practicality;
• durability.

In addition, they are distinguished by their high sound insulation, as well as reliable heat preservation. Care of products is quite simple, they are easy to clean, and are immune to aggressive components that are part of cleaning products. Separately, it is worth noting that plastic doors to the bathroom and toilet retain their original appearance for a very long time. These models with the help of modern technologies can imitate any material.

A variety of color solutions for plastic doors for the bathroom and toilet in the domestic market is also quite extensive. By aesthetic properties PVC products an order of magnitude inferior to models made of glass or natural materials in the form of wood. But at the same time, their low cost, long service life, and ease of maintenance have resonated with many consumers. What other door can be put on the bathroom and toilet?

Bathroom and toilet doors made of wood are always suitable for almost any design. If you choose wood, then it will reciprocate, since it performance characteristics speak for themselves. Bathroom doors made of wood are often a rather specific solution, because pure wood afraid of high humidity, contact with water, as well as exposure to steam. From this, the material begins to deform and becomes unusable.

Wooden door

However, there are different types waterproof rocks that will perfectly fit into the design of the room and will serve for many years. What model is better to choose? Bathroom doors made of ordinary wood with a classic installation will require careful weighing, since without additional protection leaving them is not recommended. It is necessary to calculate all the pros and cons, take into account all the nuances, and then choose which wooden crafts better to put.

In this case, the main question is the appropriateness of this choice. What prevails in it more, the desire to improve design or improve performance? Wooden doors for bathrooms and toilets are decent regardless of the type of material. Therefore, it is better to approach the expenditure of funds rationally. So if there is no special need for the design of wooden products, then it is better to put more practical models.

However, if your desire to have wooden doors to the bathroom and toilet is so high, then you should turn to waterproof species. These wooden floors mainly produced from beech, oak and other species. The doors to the bathroom and toilet are distinguished by high-quality processing, which makes the products more resistant to moisture. The design of doors for the bathroom and toilet looks very presentable, while the overlap performs the functions assigned to it.

On a note! The only negative of the doors to the bathroom and toilet is the rather high price. Therefore, wooden products usually most buyers can not afford. Since the performance properties of models are at the level of plastic or glass, however, their cost is an order of magnitude higher.

Chipboard and MDF

The design of bathroom and toilet doors made of chipboard or MDF is distinguished by its functionality. These structures are covered protective layer from laminate. These bathroom and toilet doors perform well in the relationship with water, high temperature, as well as other negative factors that are associated with a shower room. These products have affordable price, and a wide range allows you to choose models of any colors and sizes.

Which, in turn, makes it possible to vary the design at your discretion. Chipboard and MDF doors to the bathroom and toilet have several nuances. The first thing you should pay attention to is the veneer coating. It is well suited for the aggressive environment of the shower, so the doors to the bathroom and toilet from this material will be, by the way. This is possibly due to the unique cross-bonding technology of the fibers. Thus, the doors for the bathroom and toilet made of MDF and chipboard, made with pvc laminate is a good choice for your shower room!

Video instruction