Types of nozzles for a drill for cutting metals. Nozzle on a drill "cricket" - we cut metal without problems What you should not expect

On this video useful attachment for a screwdriver or for an electric drill. The author recently purchased this tool for cutting sheet metal, tin, corrugated iron. The device is compact, weighs only 400 grams, easy to use. You can buy it from this Chinese store.
Equipment. In addition to the device itself, the key is included. Allen key on one side, 12 key on the other.

How does a screwdriver bit work?

The shank is screwed to the cartridge, the working part cuts the metal. The handle itself spins. And in the place where she was, there is another knife. By loosening the nuts, the blades can be rotated to any angle. They rotate around their own axis. The same nuts are fixed. The nozzle is very simple. The knives work due to the eccentric. Great for cutting sheet metal.
The video shows how to cut a metal sheet 1.5 mm thick.

This attachment is for cutting thin sheet profiled metal up to 0.8 millimeters thick. The set includes a replaceable matrix, a replaceable punch, a handle-holder. It has a low cost and is suitable for small amounts of work.
The device has two cutting surfaces. The handle must be installed before installation. When one plane is dull, unscrew the handle, turn the nozzle over, install it on the other side. We insert into the drill, fix it. You can start cutting metal.
As shown in the video, the cut is without deformation, the speed is decent.
There is a myth that the grinder cuts faster. Verification shows that this is not the case. The grinder is slightly inferior in speed to the nozzle on the drill.
The most important thing is that the cut is very even, smooth, without hooks. Cut grinder with burnt coating, burnt zinc. During cutting, there are many sparks that fall on paintwork on metal. If the sparks from the grinder fall on polymer coating, the surface for the next season may become rusty. Every self-respecting manufacturer categorically forbids cutting with a grinder. If the cutting technology is violated, it will void the warranty.
There are disadvantages when using the nozzle. You have to work with metal using both hands. On the roof, this is problematic. But on the other hand, she will perfectly cope with your roof and with the roof of a neighbor.

The jigsaw is a drill bit designed and manufactured to the highest standards, using the experience of some of the finest British craftsmen and engineers. Cuts cleaner, faster and longer. Mounted on any drill: electric, pneumatic or cordless with a chuck up to 18 mm in size at a rotation speed of one thousand five hundred to three thousand revolutions per minute.
If you pre-drill a hole with a diameter of 12 millimeters, then this will allow you to cut a figure of almost any shape in the material. The jigsaw cuts materials at a speed of 1.5 meters per minute at a drill speed of 2500 rpm.
cuts stainless steel up to 18th density, mild steel up to 16th density, copper, brass, aluminum, corrugated plastic, plexiglass and fiberglass up to 14th density.

The tool performs a smooth cut even the most soft materials, which allows you to get any shape with neat edges.
After cutting, the workpiece does not need to be leveled and filed. You will be pleasantly surprised by the durability of these heads. It gives you maximum maneuverability.

If you have ever spent hours working with a hacksaw or the room is full of bad smell from the work of the grinder, then you will see the difference.
Working with metal with such a tool is safe. You can work with even the smallest details. It allows you to work freely while holding a drill in your hands when performing roofing, plumbing, bodywork, heating and ventilation work. The patented specially shaped cutter facilitates roofing and cladding work without damaging the profile of the materials.
If you are modifying a car according to the special requirements of the customer, you fit acoustic systems, perform plumbing, ventilation work, install kitchen sinks, make round or square holes, then you can no longer do without the help of a nozzle on a drill.

You can use it to cut out windows in a camper van or mobile home. It is easy to change the head punch, cutter. Depending on the goals, you can change the position of the head. There are four positions at your disposal. The tool rotates on a drill. Therefore, it is comfortable, regardless of whether you operate with your right or left hand. You have no idea how nice it is to work with him. The jigsaw cuts metal itself.

You don't even have to put in the effort. Just guide the tool or part. Cuts not only cleaner, faster and longer, but also easier. You get a lot more and pay a lot less. In the manufacture of this instrument, modern achievements of science and technology are applied. it's easy to do too.

Nozzle-scissors "Cricket" Enkor 14210 is used in conjunction with any drill. Designed for cutting metal up to 1.6 mm thick. It is fixed in the cartridge, which drives the nozzle mechanism. Works on the principle of cutting scissors. Allows both linear and figured cuts, suitable for cutting material during ventilation and roofing work.

Nozzle for cutting metal "Cricket" manufactured by Enkor is intended for installation on devices with a rotary chuck - they can be represented by drills or even small ones.

Thanks to its design, it is able to completely replace specialized scissors, carrying out easy cutting of steel, aluminum and other metal sheets. The advantage of the model is small dimensions, low weight, as well as a well-thought-out design that minimizes the percentage of torque losses.

Video review of the nozzle Enkor "Cricket"

Characteristics of the scissors nozzle "Cricket" for metal up to 1.6 mm Enkor 14210

The device is designed to complete screwdrivers and corded drills that have a power of at least 0.4 kW - this figure is average for this category of tools. This somewhat limits the scope of its application, since devices with a less powerful drive may be presented on the market. The internal mechanism is a standard hexagon - such a shaft provides more secure fastening than round and has a significantly lower chance of slippage.

The maximum thickness of the cut steel sheet, not subjected to additional processing, is 1.6 mm. When working with alloyed or high-carbon materials, the manufacturer recommends reducing this value to 1 mm. If the operator needs to work with aluminum, copper and other relatively soft metals, then the sheet can have a thickness of 2 mm. Thanks to this, the "Cricket" nozzle is a good alternative to the traditional hand tool. The width of the cut track does not exceed 1.6 mm - this value allows for significant material savings when performing complex work with small objects.

Also, the functionality of the device includes the possibility of pre-drilling holes with a diameter of at least 11 mm. The length of the nozzle is 180 mm, which makes it possible to work in confined spaces with the maximum level of convenience.

Features of the nozzle-scissors "Cricket" Enkor 14210

The undoubted advantage of the nozzle for metal is the absence Supplies, a counterweight cutting wheels for grinder and jigsaw. "Cricket" will help not only to quickly cut sheet metal but also quickly make a hole large diameter in sheet metal. Also with this nozzle, you can cut holes of arbitrary shape from pre-drilled holes with a diameter of 11 millimeters. In addition to all of the above, it is important to point out that the Cricket nozzle is very simple and easy to use, does not require adjustment at all, which means that even a beginner can easily master it, and a professional will appreciate the convenience and speed of work.

For more reliable fastening of the device, a plastic handle and a punch are used - they are included in the delivery. This allows you to significantly improve the accuracy of performing permissible types of work. A weight of 0.4 kg does not significantly increase the load on the operator's hands compared to the dead weight of the appliance. Drill attachment for cutting sheet metal up to 1.6 mm thick. Works with any drill.

At correct selection the number of revolutions of the drive shows excellent cutting results: it does not crease the edges of the metal, and at the same time they do not turn out sharp.

Characteristics

Contents of delivery

1. cricket
2. blister

Features of metal scissors Enkor 14210

• Ideal for punching holes in false ceiling(panels) for spotlights.
• For working with metal sheets up to 1 mm thick.
• Well cuts not thick metal 0.3-0.4 mm.
• Be sure to use safety goggles and gloves.

Advantages

• Suitable for cutting metal tiles, both along and across the wave.
• Cut edge without burrs.
• Does not heat or melt the coating
• It is indispensable for working with a painted sheet, metal tiles, which are not allowed to be cut with a grinder.

Various attachments for equipment can replace expensive analogues. For example, fixed on a screwdriver grinding disc will brilliantly perform the functions of a grinder. In the same article, a nozzle for a drill for cutting metal, its advantages and main models will be considered.

All existing lotions mounted on the rotating heads of drills or screwdrivers are divided according to their purpose into:

• grinding;
• polishing;
• drilling at an angle;
• sharpening;
• removable;
• drilling holes;
• cutting.

The last group is the subject of consideration.

Unlike cutting discs grinders, nozzles for a screwdriver or drill cut the workpiece more delicately without deforming the coating of the material. The accessory is mounted on the chuck of the power tool and is rotated when the "Start" button is pressed.

An important point - the nozzles for metal in question are not compatible with every drill. The rotational speed of the latter must be at least 2700 rpm.

Advantages and disadvantages of using

The nozzle is easy to put on the cartridge and remove after work. In addition, the user discovers other advantages of using the snap-in, including:

• cut evenness;
• no burrs on the workpiece;
• work comfort;
• ease of use and installation;
• no need for additional adjustment;
• increase in productivity;
• compatibility of known nozzles with an electric or pneumatic drill;
• ease of maintenance;
• possibility of cutting holes.

Nozzles for cutting tin, aluminum, steel have only two drawbacks. The first is to get used to them. Over time, even a beginner in the construction and repair business will master a simple device and learn how to work effectively with it.

The second disadvantage is the need to work with two hands. This complicates the work, for example, when installing the roof, if drill bits are used specifically for cutting metal tiles.

This is due to the fact that upper layer roof coverings are protected from above with a polymer that is unstable to high temperatures.

A working angle grinder inevitably heats up, so a layer of polymer melts at the cut points, and then a zinc coating. Moreover, the sparks flying in different sides, will increase the area of ​​damage. The result is disappointing - the deformation of thin sheet metal, the possibility of rust. Therefore, for sensitive materials, it is better to look after the nozzle.

The principle of operation of removable elements

The equipment has a shank screwed to the working part of the drill or screwdriver. The nozzle is fixed with the same nuts that held the drill or bit for self-tapping screws. Since the fixed part has a rounded shape, you can turn the fixture at a convenient angle.

Knives that cut thin sheet metal operate due to the eccentric. The modified tool is ready for use immediately after attaching the detachable part. After cutting the blanks, the nozzles for the screwdriver are removed, cleaned of chips, and stored in their original packaging.

Overview of popular fixtures

"Cricket"

Experienced masters of the construction business came across two names of nozzles - "Cricket" and "Beaver". More about each - below.

"Cricket" according to the principle of action resembles nibbling scissors (cutting). Thanks to two cutting heads, they perform a smooth cut not only on smooth workpieces, but also on profiled ones. Also with their help it is easy to cut plastic, polycarbonate.

Maximum allowable cutting thickness:

• sheet steel - 1.5 mm;
• stainless steel - 1.2 mm;
• copper, aluminum - 2 mm;
• plastic blanks - 2 mm.

The scope of use of the "Cricket" nozzle is extensive. Being universal, it allows you to perform operations on a horizontal, vertical surface, to perform an internal cut. Nibblers for a drill process corrugated board and metal tiles, are used for cutting tin and coarser materials of small thickness.

After work, the user will notice an even cut without burrs, notches, and note the integrity of the coating. For the durability of the nozzle, it is worth considering the recommendations of the manufacturer. In particular, the minimum speed of the drill is 1500 rpm, the maximum is 3000 rpm.

"Steel Beaver"

In the construction environment, the fixture is known simply as the "Beaver". The principle of operation is the same as that of the Cricket. The punch, which performs rotational-translational motion, bends the material, rests on the matrix and cuts it.

Nozzle for cutting metal "Steel Beaver" - the same scissors that perform straight and curved cuts with the smallest radius of 1.2 cm. The removable accessory can be positioned anywhere (it rotates 360 degrees) for ease of use.

If compared with the previously considered equipment, the "Beaver" will cut a metal sheet of greater thickness - up to 1.8 mm. The benefits are exactly the same as those mentioned above.

The minimum speed of the drill should be 1500 rpm, and the allowable thickness of the stainless steel should be 1.2 mm.

It is worth noting that almost every nozzle works according to the same parameters. The only exception is the thickness of the metal workpiece, which one tool can cut, while the other cannot. The result of the work will be a smooth, sharp edge without dents or other defects. This is inevitable if the nozzle for cutting tin, copper, aluminum and other metal is selected in accordance with the speed of the screwdriver (drill).

If a novice user either experienced builder there is no desire and opportunity to spend money on an expensive cutting tool, he should take a closer look at inexpensive analogues. The cost of classic nozzles - "Cricket" and "Steel Beaver" - is 1800 and 2000 rubles, respectively ( average price by market). This fact also explains their demand among repair craftsmen and novice specialists.

The need for analogue grinders or other cutting equipment sometimes arises suddenly. The presence of attachments like "Cricket" and "Beaver" at hand is the key to a quick and safe solution to the problem.

Watch the video. Quite interesting imported analogue:

There are a great many tools that can be useful in everyday life or for infrequent custom work. In order to buy, for example, the so-called "grinder", you will need a considerable amount, and in the meantime the tool will lie somewhere in the garage or workshop idle, being unclaimed.

Not every tool designed for a particular job, a person is able to buy: it will take a lot of money and extra storage space. And, as practice shows, there is simply no point in this. But there is still a way out of this situation.

Nozzles are for the following works:

• Drilling at an angle;
• grinding;
• Polishing;
• Sharpening nozzles;
• Drilling;
• For cutting metal.

As can be seen from what has been said, having only one drill and a few nozzles, you can thus replace a lot of expensive tools and not waste your money.

Basic Sheet Metal Cutting Methods

Sooner or later, every homeowner, not to mention specialists, cuts sheet metal in one scale or another. Ever since labor lessons at school, and for many after, in production, such tools for cutting metal are known:

But time goes by and technical progress does not stand still. Mankind has invented a simple and inexpensive cutting tool that works in tandem with an electric drill called "metal nibbling scissors". This equipment is simple, constructive and very convenient in operation.

When there is one in the tool arsenal of any man, as well as an electric drill, then there are no problems with cutting a metal sheet and cannot be.

And if there is none on the farm, then it can be purchased at the nearest household or construction market.

Good alternative to Bulgarian

This drill attachment has been helping out craftsmen for many years now. Such a tool is called nibbling scissors.

Easily punches a track about 3 mm thick in metal. This cutting method gives the desired cleanliness of the cut, and there is no particular need for further cleaning of the cut.

Thicknesses of materials that the scissors can cut:

• Copper and brass - 1.5 mm;
• Aluminum - 2 mm;
• Stainless steel - 0.8 mm.

For metalworking

These nozzles are scissors simple and original design, where rotary motion the drill chuck is converted to reciprocating.

Nibblers "Cricket"

The technical capabilities of the "Cricket" nozzle allow cutting metal and plastics. Moreover, the material can be cut both sheet and profile. Two cutting heads of the cutting nozzle on the drill allow cutting materials certain thickness (specified maximum thickness):

1. For aluminum - 2 mm;
2. For steel - 1.5 mm;
3. For stainless steel - 1.2 mm;
4. For plastic - 2 mm.

Additional characteristics:

• Electric drill power from 420 W;
• Turnovers - from 3000 rpm;
• Cutting radius (minimum) - 12 mm;
• The cutting direction is unlimited, hence 360 ​​degrees.

Application area:

1. Mounting;
2. Roofing works;
3. Production of gutters;
4. Disassembly of various structures;
5. Body work;
6. Curly (decorative) cutting.

When working with nibblers, the drill does not require any adjustments and special skills and knowledge.

The Cricket tool for cutting metal is very maneuverable, and its capabilities are cutting tool are very wide.

As for cutting with a grinder, there are a number of disadvantages here, compared with cutting shears for metal. The nozzle on the drill has a number of significant advantages:

• The material does not overheat during cutting, which is especially valuable when cutting metal tiles.
• The maneuverability of nibblers for a drill is much higher than that of a well-known grinder.
• Higher cutting speed.
• A cleaner saw cut that rarely requires further plumbing.
• When working with nibblers for a drill, there are no jamming of the tool from distortions, which very often happens when working with a grinder, hence the almost complete absence of injuries.
• The zinc and paint-and-lacquer coating of the material does not burn, which helps prevent premature corrosion and, which is very important, maintain the guarantee for the material.
• When working with the Cricket tool for cutting metal, there are no sparks, unlike a grinder, which not only protects the material from burning, but also eliminates the possibility of injury to the eyes of the worker.

Nozzle-scissors "Cricket" has a number of analogues, for example:

1. "Beaver";
2. "Steel Beaver";
3. Scissor attachment NP 1.8 SPARKY;
4. EDMA NIBBLEX;
5. Malco turboShear TS1 - can be used with a drill and for installation on a screwdriver.

All of the listed nozzles have some differences on technical specifications and prices. The most expensive nozzle is Malco turboShear TS1. It has a slightly different design and is made in the USA, not China.

It should be noted that normal work of these devices can only be provided with a passport drill speed of more than 2700 rpm.

Nozzle for screwdriver

If an electric drill is not available, then a screwdriver can also perform the same functions.

There is, however, a difference:

• The revolutions of a screwdriver are lower than those of a drill. Low speed and, accordingly, the power of the power tool will not allow cutting metal with the same productivity, especially if it is closer to 2 mm in thickness.
• Lack of inertia. After the user releases the button, the chuck immediately stops rotating. In terms of safety, this is even somewhat better, as well as in the case of a figured cut.
• Small size and light weight compared to a drill. This allows you to do all sorts of "pirouettes" when cutting, more easily than with a drill.
• Screwdrivers run on batteries, therefore, its operation is autonomous, and power cord does not interfere with normal operation.
• There is no adjustment of the rotation speed of the cartridge.

It is quite clear that a screwdriver can also be used instead of a drill with a Cricket type nozzle.

For cutting metal tiles and more

This nozzle is a real find for cutting material such as metal tiles.

Advantages:

1. Does not damage the material and coating;
2. Easily follows the contour of the material profile;
3. Able to make cuts of varying complexity.

"Cricket" is a real find for both the handicraftsman and the professional. She can make an internal cut and can work both in horizontal and in vertical plane.

The nozzle for cutting metal tiles allows you to cut metal tiles and corrugated board, with which this tool does an excellent job. After all, it is well known that it is difficult to work by making cuts in these materials with another tool, and the Cricket copes with this task perfectly: cleanly, quickly and without errors.

Advantages and disadvantages

Advantages:

• Surface cleanliness is better than that of a grinder.
• This device can make holes ("windows") of any complexity in the metal.
• The tool is easy to use and maintain, takes up little storage space.
• Low price.
• You can cut both metal and plastic, as well as carbonate of a certain thickness, stated in the instructions for use of this equipment.
• The possibility of using the device in places where there is no power supply is compensated by the presence cordless drill. In addition, it can be successfully used in damp rooms, where using an electric drill from the mains is life-threatening.
• The device is multifunctional.
• The low weight of the device is also an undeniable advantage.

Of the shortcomings, there is the only and main one: the device must be held with both hands, which is not always convenient and safe when working at height.

In conclusion, I would like to summarize what has been said. Any user, both beginner and experienced, who does not want to overpay for a fabulously expensive tool, can always buy an inexpensive analogue that will pay for itself very quickly by performing the same functions.

Very often it turns out that suddenly there was a need to use a cutting tool, and it was not included in the plans to buy something expensive, which is not known when it will be needed (if it is needed at all).

AT this case it is cutting shears for metal that will come in very handy.

That's why cutting attachment found on a drill wide application in many branches of human activity: repair, assembly, dismantling and restoration.

Good luck with your purchase and enjoy working with the Cricket attachment for metal cutting!

When performing construction or repair work, it often becomes necessary to cut a metal blank. To do this, use special equipment in the form of a cutter, grinder or. However, it is not always available. You can cope with the task with the help of a nozzle on a drill for cutting metal, which will cut products of small thickness.

Many craftsmen are accustomed to using a drill for its intended purpose, namely for drilling holes. But not everyone knows that this tool can be turned into a multifunctional device, supplementing it with special nozzles, fixtures and stands, which will make the drill universal and indispensable in any job.

With the help of special nozzles for a drill, which can be bought at any specialized store for affordable price, can carry out drilling of holes of various diameters, cutting, grinding, polishing, twisting, mixing and milling. There is also a pump attachment for a drill, designed to pump fluid. The attachment for plucking chickens is simply indispensable in household. With the correct and competent use of additional prefixes, the result will not be the worst quality, as well as when using a special single-purpose device, but the cost of such a universal tool will be several times lower.

By purpose, all existing nozzles are divided into:

• equipment for drilling holes and crowns;
• scissors for cutting metal;
• stops;
• corner fixtures;
• grinding and polishing nozzles;
• equipment for milling wood and metal;
• sharpening devices;
• transfer nozzles.

When working with any nozzle on a drill, you must follow the safety rules:

• the equipment must be securely fixed in the tool chuck;
• the drill must be held with two hands, which is especially important for powerful models;
• constantly adjust the pressure of the tool;
• work in personal protective equipment;
• after completion of work, do not touch the drill for several minutes to avoid burns.

What are drill bits for metal cutting?

Equipped with a special nozzle for cutting metal conventional drill turns into a punch or cotter pin. Device punches metal product due to the implementation of numerous reciprocating movements along the internal cavity of the matrix. As a result, an even cut line 3.1 mm wide is formed with the protective layer on the surface of the metal sheet preserved.

Important! The maximum efficiency of the nozzle is achieved only when used in conjunction with electric drill, the rotational speed of the cartridge of which is at least 2700 rpm.

The metal nozzle on the drill can handle the cutting of such metal products:

• aluminum, up to 2 mm thick;
• made of brass, copper, zinc, galvanized steel and sheet iron, up to 1.5 mm thick;
• made of stainless steel, up to 0.8 mm thick.

Using a drill bit for metal cutting has a number of advantages:

• the cut is of high quality;
• there is no need to constantly purchase consumables, which saves money;
• ensured high performance when cutting metal;
• versatility of the device;
• the equipment is convenient and easy to use and maintain;
• the nozzle can be used for electric and pneumatic drills;
• with the help of a nozzle it is possible to carry out cuts of any configuration.

Despite all the above advantages, in order to get a cut High Quality, some skills and dexterity are required for work.

Popular nozzle models

Today there is a large number of various models nozzles for a drill, thanks to which you can not only cut metal in a straight line, but also make curly cuts. This is required for installation. ventilation ducts, roof structures, gutters. Using the nozzle allows you to cut in any spatial position without making any preliminary adjustments.

Nozzle types:

• cutting nozzle "Steel beaver" is used for cutting metal tiles, corrugated board and any flat profile sheets;
• universal nozzle "Cricket" is used for cutting profile metal, polycarbonate and plastic;
• special nozzles for curly and curved cuts are represented by the EDMA Nibbek, ACRO YT-160 A, Sparky NP 1.8 L models, which differ in the thickness of the processed sheet.

Nozzle-scissors on a drill"Steel Beaver"

A classic drill attachment for cutting metal tiles and any flat sheets from metal in the form of a freely rotating shaft in a bearing with a fixed eccentric, it works on the principle of a crank mechanism with the difference that energy is supplied here for rotation.

A complete cutting tool support part located on the frame, and movable - connected to the eccentric. It is the movable part that performs reciprocating movements during the rotation of the shaft. A mandatory element of the design is the handle, which is fixed perpendicular to the axis of rotation of the spindle. During the increase in load, a reactive torque occurs, due to which the drill advances relative to the nozzle.

It should be remembered that the tool must be placed strictly vertically relative to the workpiece when making a cut. Failure to do so may result in damage to the product and injury to the operator.

The device resembles metal scissors. The drill attachment is used for cutting flat products or profiled sheets with large radius bends. The cutting line is easily controlled. When the tool is running protective layer coating is not burned, which eliminates the formation of sparks and the likelihood of burrs. You can perform continuous cutting of products of any length. You can buy a drill attachment for cutting metal tiles and flat metal sheets for 1600 rubles.

Using the “Steel Beaver” nozzle for a drill, you can make a figured cutout for mounting roof ventilation elements or a gutter

Sheet cutting is performed at a drill speed of 1500-3000 rpm. The cutting angle is 360 degrees, the minimum radius is 12 mm. With the help of the “Steel Beaver” nozzle, you can cut:

• copper or aluminum sheet 2 mm thick;
• steel - no more than 1.8 mm;
• stainless steel - up to 1.2 mm,

Useful advice! For cutting a profiled sheet with bends of small diameter, use cutting shears of the Cricket type.

Nozzle on the drill "Cricket"

Nibblers "Cricket" got its name due to the characteristic noise during operation of the device. The nozzle is similar to the previous model, but has a different design of the working element, consisting of two cutting heads. The principle of operation of the nozzle "Cricket" is similar to an office hole punch. Accurate holes are squeezed out in the metal during oscillatory movements of the cylindrical striker with a high frequency. Thanks to translational movements along the marked line, it is possible to obtain an even cut.

Nozzle-scissors "Cricket" are used for cutting metal thin and profile sheets, and polymeric thin-sheet products up to 2 mm thick. Work can be performed in the horizontal and vertical plane. Due to the ability of the tool to rotate 360 ​​degrees. can drill large round holes and make artistic cuts. You can buy a nozzle for a drill for cutting metal "Cricket" for an average of 1500-4000 rubles.

The tool can cut metal with stiffeners and various profile stampings in two ways. The first option involves repeating the surface of the profile, bending around the edges. It is used for products with an average bending radius. For cutting metal tiles, another cutting option is used, according to which the tool moves along the stiffeners without bending around the sheet profile.

Before you buy a nozzle for a Cricket drill, you should consider the main drawback of the tool. Due to the fact that the punch of the nozzle has a diameter of several millimeters, when cutting the product, a cut of a certain width is formed, which leads to certain material costs. The result is crescent-shaped, sharp-edged metal shavings that should be disposed of immediately for safety reasons.

Useful advice! When working with the tool, do not wear soft shoes.

Nozzle for drill "Cricket" does not require adjustment, easy to use and maintain

One of the most popular models is a scissor attachment "Cricket" for metal up to 1.6 mm Enkor 14210. The tool is able to cut a sufficiently thick metal sheet in a straight or curved direction. You can buy a nozzle for a drill for cutting metal for 1300 rubles. Main Feature tooling is that during the cutting process a path is formed with a width of only 1.6 mm, which provides enough good level material savings.

The device can be installed not only on a drill, but also on a screwdriver. The metal cutting attachment is lightweight, which does not add weight electrical appliance. The kit includes a replaceable handle, which increases the accuracy of the work. The device has a low noise level due to its special design, which makes working with it more comfortable.

Nozzle on a drill for sharpening drills

This device consists of a plastic case, inside which a special-shaped emery wheel rotates. It is he who allows you to form the required sharpening angle on the working part of the tool. The circle is mounted on a shaft, which is connected to the drill with a special coupling. It is activated when the tool is turned on.

Many modern models have an end cover on the body, in which there are holes of various diameters for sharpening drills different sizes. These holes are made in such a way that the element for sharpening is in contact with the emery wheel in a certain position.

The principle of operation of the sharpening nozzle is simple - when the drill is turned on, the chuck rotates the whetstone located inside

The process of sharpening the drill is as follows. The product is inserted with the cutting part into the nozzle hole of the corresponding diameter. After starting the drill, the emery wheel begins to rotate, sharpening half of the drill bit. Then the product is turned over in the hole by 180 degrees, and the procedure is repeated. This sequence of actions is performed several times until the required parameters of the cutting part of the drill are reached.

A drill attachment for sharpening drills, which you can buy on average for 350-500 rubles, has 15 holes with diameters from 3.5 to 10 mm. Products can be sharpened at an angle of 180 degrees thanks to special form stone. Simple design device allows you to perform work quickly and without special skills.

Related article:

Types of structures, their characteristics and features. Review the best manufacturers machine tools. Comparative characteristics rates.

However, it should be remembered that the device is intended for sharpening cutting edges. For a full-fledged sharpening of heavily worn products, an emery wheel will not be enough for a long time.

Useful advice! Buying a nozzle specific model, consider the diameter of the drill chuck.

There is also another type of additive. This is a nozzle for a drill for sharpening knives and scissors, which is presented in the form of two emery wheels planted on a shaft and located at a certain distance from each other. The price of such a device is about 250 rubles.

The nozzle for and scissors for a drill is easy to operate, does not require special skills in its use.

Nozzle for a drill for grinding

Using a grinding attachment on a drill, old coatings, corrosion, nicks, scales are removed from the surface of the product. It is used for grinding glass edges, metal parts and products from other materials. Thanks to small size equipment can handle hard-to-reach areas. average cost products is 500 rubles.

Grinding drill attachments are used for preliminary rough preparation of the base for future polishing. It is made in the form of a rod, on which grinding material is fixed in the form of a brush or sandpaper. There are various types of such devices that are used for specific tasks.

A cup attachment for a drill for grinding wood or other material is represented by a rod mounted on a chuck and a cup-shaped body filled with light or hard bristles. The body is made of metal or durable and lightweight plastic. Usually such a nozzle is used to remove old coating or corrosion from the surface.

Another variation is the disc attachment for a metal grinder, where the bristles of the grinding material in the form of a brass brush or steel wire are directed towards the edges of the disc from its center. This additive should be used very carefully, as it can easily damage the coating. The plate nozzle has a movable or fixed rod, which is fixed on the cartridge. Sandpaper is attached to it with Velcro.

Useful advice! It is better to purchase nozzles with a movable rod, which allows you to adjust the angle of the drill, while smoothly following the contours of the material.

Petal or fan grinding head represented by a rod on which pieces are fixed sandpaper or other abrasive material. It is used to perform radius grinding or surface treatment with complex profile. It can also be used for grinding holes, as well as carbide cutters or cutters that work on the principle of a file.

Grinding abrasive stones, mounted on the stem, are used to remove sagging, burrs, boring holes or leveling the weld.

Drill bits for polishing

After grinding the base, it is necessary to give it a smooth surface. This is done by polishing using special nozzles. They can be made from felt, wool, foam or felt. According to the degree of softness, they can be hard, soft, super soft and embossed. According to the method of fastening, nozzles with a stem, with Velcro and with a holder-lock are distinguished. Fan or disk nozzles are used for polishing discs, end devices are used for holes. The average price of a product is 250-300 rubles.

Many motorists have in their arsenal a nozzle for a drill for polishing a car. However, when choosing this product, you should consider some features:

• the device must be of high quality and professional;
• for efficient and safe polishing procedures maximum amount the speed of the drill should not exceed 3000 rpm, which is indicated in the characteristics of the device, otherwise the paint will simply burn out;
• the nozzle must be from a well-known brand;
• the device should not be included in the budget products;
• for polishing each individual part of the car should be used special nozzle designed specifically for this purpose.

The process of polishing a car with a drill is a very complex and time-consuming process that requires certain skills. If there is no experience, first you need to study all the subtleties this process, master the basic techniques presented in the videos on the Internet. It is better to start with inconspicuous areas of the body. The tool is configured to the desired parameters, taking into account required number revolutions. The nozzle should not be pressed too hard against the surface to high temperature don't burn the paint.

Nozzle for a drill for plucking birds

Plucking a bird is a very time-consuming process, especially when it is necessary to process several carcasses. Therefore, many farmers were constantly looking for new solutions not only to make work easier, but also to reduce the overall time. For this purpose, a feather attachment for a drill was specially developed, which removes feathers from a bird in a matter of minutes. It is similar to a dishwashing brush, only silicone fingers act as bristles here, which, when the shaft rotates, pull feathers out of the carcass. At the same time, the bird is brought from different sides.

Nozzle for a drill for plucking birds, which you can buy on average for 1500 rubles. processes poultry carcasses in just 2-3 minutes, leaving not a single feather. The result is smooth, undamaged skin. The device is effective not only for processing chickens, but also gives a good result when plucking geese. The drill attachment can be used not only for fresh, but also for frozen poultry.

Useful advice! It is not recommended to scald the carcass with boiling water before using the nozzle, which will reduce the efficiency of the processing process.

The main advantages of the drill attachment, which you can buy at any specialized store, are the speed, ease and portability of use, which does not require certain skills and additional processing of the carcass before plucking. A significant disadvantage of the device is that after this mechanical process, damage remains on the carcass, which worsens it. appearance. Therefore, if the bird is intended for sale, it should be plucked manually.

Other types of nozzles

When it is not possible to make a hole in the usual mode, you need to use an angled nozzle for a drill. The working head of such a device can be rotated at different angles relative to the axis of rotation of the drill chuck. The main disadvantage of the equipment is the increased risk of drill failure. Therefore, the most popular is angle nozzle for a 90 degree drill, which is fixed on the neck of the drill. The price of the product is an average of 800 rubles.

For craftsmen who are engaged in the manufacture of furniture, cutter bits are very popular. various kinds. They can be backed and pointed. With their help, you can make grooves different shapes and depth, process holes and remove defects. The cost of equipment is in the range of 350-450 rubles.

To mix a solution of different consistency, a mixer nozzle for a drill is used, which is selected taking into account the density of the solution. So for mixing glue, liquid putties and other fluid mixtures, spiral devices are used that prevent splashing of the solution. For mixing concrete, nozzles with a tail in the form of a hexagon are used. Mixing mixtures with this nozzle will be carried out quickly and efficiently. However, in order not to reduce the efficiency of the device, it is necessary to maintain the volume of the mixture for kneading. The price of the nozzle is 500 rubles.

Useful advice! When choosing a mixer attachment for a drill, it is necessary to take into account the power of the tool. An increase in load can lead to burnout of the winding.

Indispensable in concreting is a vibrator for concrete on a drill, the price of which is about 900 rubles. It is used to compact the concrete mass during its laying, namely, it is designed to remove bubbles and air layers from fresh concrete. The nozzle requires a drill with a power of at least 1500 watts.

For woodworking home master you just can’t do without a nozzle for a drill for cutting wood, the average price of which is 2000 rubles. To pump liquid, you can use a nozzle-pump.

A wide selection of different attachments, fixtures and accessories makes the drill universal tool, which is indispensable when performing repair work and for other business needs living conditions. It's simple and optimal solution, which will avoid the purchase of expensive specialized power tools.