What to make a housekeeper with your own hands. Beautiful housekeeper: buy or make yourself? Do-it-yourself wall key holder: options, master class

You found yourself in a funny situation when, when you left the house, you could not find the key. Well, it happens. That is why we suggest trying to make a wall key holder with your own hands. Hanging it on the wall front door- you can be sure that the keys and other little things will always be in one place. Do-it-yourself key holder will add warmth and comfort to your home, because this is a handmade key holder - no one else has it.

Such key holders are different types- key holder open and closed. A do-it-yourself wall key holder can be made of wood, cardboard, paper tubes, corks, branches, boxes, polystyrene, and so on. It all depends on your imagination and artistic taste. An open foam key holder in the shape of a cat is our first master class.

It often happens that when we buy appliances or furniture, all this is brought to us packed in foam. But the foam - interesting material for crafts. Figures are cut out of it, glued fairy houses, letters for the celebration, and even lamps. So our master class today will be called: “How to make a housekeeper with your own hands from foam”. Decorative key holder in the shape of a cat great option for your hallway.

For work you will need:

Polyfoam 50 mm thick.
Cotton wool.
PVA glue.
Cardboard of the right size.
Glue made from potato starch.
Accessories - hooks for the key holder and rings for mounting on the wall.
Acrylic putty.
Acrylic paint - white and black.
Knife or scalpel.

In the process of work, we need a starch paste. But you need to take into account the fact that you need to prepare the paste when necessary, since it is stored for no more than 5.5 hours and is used in a warm state. Before you start work and make a craft - a do-it-yourself housekeeper in the hallway, we will cook a paste.

For a paste, pour 10 tablespoons of water into a ladle or bowl.
In another dish we breed 1 table. a spoonful of starch and 2 tbsp. spoons of water from a bucket. Stir until thick cream. It is necessary that there are no lumps.
We boil the water in the ladle and pour it in a thin stream, stirring vigorously, into the dishes with the finished mass. If the glue is too thick, add another 1-2 tablespoons of water at this moment.
While the paste cools, a film forms on top - it must be removed with a spoon.

Preparing workplace: we put thick cardboard on the table, newspapers - there are always a lot of crumbs from the foam. Blank key holder - that's what we do at the beginning. On a piece of foam that we cut out for ourselves, we draw with a pen a sketch of the cat housekeeper. Below - an oval, above - a circle (you can use a saucer for stroking).

We start cutting according to the outlined sketch. If you do not want there to be a lot of crumbs from the foam, you can heat the knife (in the future it is better not to use this knife for eating) over the gas - the hot blade cuts faster. Just take care of good ventilation in the kitchen - otherwise you will breathe chemistry.

Create volume: select the head, paws, torso of the cat.

Primer with PVA glue and a brush. After priming, you need to let the product dry.

We cover the product with an “open housekeeper” papier-mâché made of cotton wool (we put cotton wool on the workpiece, and then moisten the cotton wool abundantly with a paste and a brush, and iron it with a brush). In the process of work, if a flat part is needed, then we press the brush harder, and if a three-dimensional part is needed (a head, for example), we barely touch the fleece with a brush (only for wetting with a paste).

We do all the details in the same way. Eyes and nose - balls, molded last. We will leave the product for the night - the key holder blank should dry well.

On the reverse side of the workpiece we make holes for the loops. Loops are needed in order to hang the finished work on the wall.

Fix the loops on the back side with acrylic putty.

Finished with white acrylic.

Attach key hooks. Hooks and loops can be made independently from thick wire, or you can buy ready-made ones at a hardware store.

On the inner part you can glue cardboard - so the open housekeeper looks neater on the wall.

We paint with acrylic paints. Leave to dry until morning and then varnish.

On the video - a housekeeper as a gift Cat, do it yourself:

AT this moment we are interested in housekeepers cats and cats. We know that there are many varieties of this decor: an open key holder, a magnetic key holder, a key holder with a shelf, a loft key holder, a birdhouse, pocket, desktop (a small box or chest for keys), a key holder - a box with a lid and without, and so on.

Key holders are original with silhouettes of cats, cats and kittens, you can make your own from wood, plywood or thick cardboard. It is even easier to glue figures of cats and cats from felt, cardboard, salt dough, polymer clay.

DIY product kittens from metal shelf and felt figurines. This item is suitable not only for keys, you can also hang brushes, a tongue for shoes, and so on on hooks.

Wall-mounted key holders in the hallway will add warmth and comfort to your home. Open key holders with your favorite cats are always popular and in demand. In addition, open key holders are suitable not only for keys, but also for other small things, handbags, belts, and so on. Why not spend an hour or two working on interesting home decor.

Key holder - convenient and original way key storage is ok. There are two types of key holders - wall and pocket. We invite you to familiarize yourself with original ideas for the manufacture of wall key holders with their own hands.

Do-it-yourself wall key holder - varieties and characteristics

The design features of key holders changed in relation to the type of keys used. With the great popularity of spring and lever type locks, the size of the key holder was large and very original. Key holders had various forms; forging, woodcarving, painting, etc. were used to decorate them. Home key holders were made in the form of overlays on the walls, in order to avoid damage to the finish with a metal key.

One of the most popular options is the manufacture of a plank key holder, which easily fits into any type of interior, takes up little space and has a simple design.

Key holders in the form of small shelves are also distinguished by their compact size and ease of use. To make the simplest key holder, it is enough to use wood or plywood. You can also store other small items on such a key holder, such as glasses for example.

If the house has a large number of lockable premises, sheds, outbuildings, etc., then the installation of a key holder will be relevant large sizes. Most often, it has the form of a board, each of the fragments of which has a certain type of key. The location of such a housekeeper is usually near the kitchen or in utility room. For the standard set of keys used to lock the front door, a small key holder is installed, usually located in the entrance room.

When restricting access to the key holder, it is necessary to install the option of a lockable cabinet. Such key holders are located in secluded places, some of their options are additionally locked with a key or a special code, which is even more convenient.

The most popular version of the key holder is the key holder-board. Their widespread use is due to their simple design, ease of operation, convenience self-manufacturing. It is quite possible to make such a housekeeper from ordinary cutting boards. However, it is recommended to choose for the manufacture of key holders such boards that have oblique grooves. Next, install the fasteners for the keys. Most often, these are nails or screws. If necessary, the key holder is painted in proportion to individual characteristics rooms and mounted on the wall.

The key holder in the form of wooden block. All fasteners for keys are located on it firmly, without the possibility of deformation.

Another option for making a key holder is a frame. It goes well with the wall, makes the interior unusual and original. It is enough to build a frame from wood or other materials, attach key hooks to it and hang it on the wall. In the presence of a durable finish, it acts as a highlighted image on the wall. To fix the frame on the wall, use glue or additional fasteners. The installation method is determined individually depending on the material from which the walls are made.

To combine several useful properties housekeeper, we recommend that you take a closer look at the housekeeper organizer. On such a capacious shelf there is a place not only for keys, but also for various papers, notes, reminders.

If there is a need to install secret locks or store not only keys, but also additional documentation, we recommend stopping at a cabinet key holder. Sometimes the front door of such a key holder additionally performs the function of a clock.

Another subspecies of a key holder in the form of a cabinet is a house key holder. For its manufacture, wood is most often used. The front door of the key holder is decorated with carvings, original drawings or even decoupage. The size of the key holder of the house is smaller than that of the closet, it is more compact and roomy.

Do-it-yourself wall key holder - master class

If there is an unusual, original box in the house, you can also build a key holder from it. In this case, fittings are attached to the back wall of the box to hold the keys, and it is fixed on the wall with self-tapping screws. Please note that the box in this case must be made of wood.

The same key holder can be made from an old wooden box, additionally completing its decoration. For additional strength, the wood is covered with moisture-resistant compounds.

Quite often, key holders are made from the remnants of plywood. By using special tool, manages to create incredible works of art in the form of small housekeepers. For additional protection plywood, it is varnished, after sanding. Artistic sawing on plywood allows you to make key holders in the shape of a horse, heart, star, animal and plant.

In production, this process is carried out using laser machines. However, it is quite possible to make such a version of the key holder at home. For these purposes, follow the instructions below:

draw or print on the printer the picture you want to receive;
prepare a manual jigsaw;
if you have a vibrating jigsaw, use it for cutting especially thin elements;
using a manual cut, the workpiece is made, in order to hide small irregularities, the surface is additionally processed using an electric wood burner;
to make such a device, you will need an old soldering mechanism and a power supply unit.

We offer a variant of making a key holder in the form of a plywood key. To make it, prepare a sketch of the shape you like. Such a key holder for children is especially interesting, as it has an extraordinary shape and resembles the “Golden Key”.

Do-it-yourself wall key holders photo:

To make original wall key holders with your own hands, it is enough to use simple tools at hand. The first option - fixing branches from knots on a wooden plank allows you to get a completely original key holder. Do not choose too small branches that can break under the weight of the key. Do not forget to additionally treat the wood with antiseptic compounds.

The second way is to use a previously dried boletus mushroom. These elements are characterized by high strength and long service life. From old tableware in the form of forks and spoons, you can also build original key holders. By bending the plug in a certain position, you get the original key hanger.

Having experience with various techniques according to the decor of the key holders, it is possible to build whole masterpieces in the form of wall key holders. You can make a housekeeper from polymer clay various forms and color solutions. Most importantly, this element must be in harmony with common style interior design. After drying, polymer clay acquires special strength and has a long service life. Additionally, fittings of a suitable size are fixed on the key holder.

An oven is used to bake the finished part. Only after complete cooling, the part is ready for operation and further opening with varnish.

The prepared surface of the housekeeper is also decorated using decoupage technique. To fix this removal, a varnish on a matte or glossy base is used. There are two ways of decoupage - direct and reverse action. The first involves pre-coating the surface with a primer, applying glue and gluing the picture.

In the second method, transfer-type pictures are used that are installed on the surface. DIY wall key holder decoupage - different original and unusual appearance. Particular attention should be paid to the absence of wrinkles on the decoupageable surface. It is possible to decorate the housekeeper with 3D decoupage. However, for this you need to have experience in carrying out this kind of work.

How to arrange and make a wall key holder with your own hands

The process of designing a wall key holder should be given Special attention. After all, it is on the quality of this process that both the aesthetic appeal of the resulting product and the duration of its operation will depend.

Most often, wooden key holders can be stained, varnished or artificially aged. For painting wooden products we recommend using paints on acrylic base. The duration of their drying reaches five hours. They differ in wide colors, the presence of simple and glossy brilliant shades. With their help, you can imitate wooden, metal, nickel, chrome surfaces.

After applying paint to a wooden wall key holder with your own hands, you can get a thin, durable and elastic coating. Thus, it is possible to achieve the effect of an aged surface. For these purposes, an abrasive sponge is used, which is used to treat the surface after painting.

As additional elements to decorate the surface of the key holder, we select the following means:

varnishes - these compositions allow you to get a glossy, matte, textured or smooth surface;
varnishes with 3D effect - allow you to create a fairly thick protective covering, which has individual optical components and makes the image convex;
textured pastes - after drying, they allow you to create an image in the form of an aging, cracking texture.

The technique of decorating the crackle housekeeper is to obtain a cracked surface. At the same time, there are many varieties of this technique and different types compositions for the formation of cracks.

How to make a wall key holder with your own hands photo

Particular attention should be paid to the key holder, with a secret mechanism. This version of the housekeeper has the shape of a regular picture, which opens with a special lock. By clicking on the secret bar, it is possible to open the key holder. The secret bar, in this case, is equipped with special bevels that allow it to open and close with one touch.

To make such a key holder, you need to have special experience and knowledge. First of all, you should draw up drawings and determine the mechanism for opening the picture. Next, you should build its frame part.

Inside the picture there should be hooks for the location of the keys. Additionally, the mechanism is equipped with spring mechanisms and clamps. We recommend that you purchase such a key holder in a specialized store, since it will take a lot of time and effort to make it.

Another option for a hidden key holder is a key holder in the form of a shelf with a hidden lock. To open it, a special magnetic locking mechanism is used. Therefore, to open such a key holder, you will need a special key.

Do-it-yourself wall key holder made of wood

In the process of working on the key holder, you will need to have:

scraps of plywood or fiberboard sheet;
acrylic paints;
varnish for processing wooden surfaces;
napkins;
brushes;
glue;
fittings and fasteners.

To make such a key holder from wood or plywood, make a rectangle or square. In order to give the surface maximum smoothness, sand it additionally. After stripping, the workpiece should be coated with spray paint. Next, the workpiece is varnished in several layers with complete drying of each. Further actions according to the decoration of the surface are determined individually and are described above.

To fix any decor, a moisture-resistant varnish is used, which will protect the key holder from destruction. Additionally fix fittings for keys on it. Hang the finished product on the wall using self-tapping screws.

Making a wall key holder with your own hands is a completely individual process, the procedure for which is described in the drawings and depends on the preferences of the master doing the work.

How often, leaving the house, standing literally on the doorstep, you suddenly realized that the keys to the apartment, country house Or is there no garage in sight? They are nowhere to be found - neither in pockets, nor on the table, nor in the chest of drawers! You can avoid this situation if you give them their own special place. They can serve as a wall key holder, which is quite capable of being made independently from improvised materials. You can, of course, just drive three nails into the wall and calm down on this, but you must admit that a beautiful original little thing will look much better and more aesthetically pleasing in the hallway!

Wall key holders: types

Decorative wall key holders can be a wonderful gift that will delight people close to you with its originality and unusualness. Moreover, it is also great helper to restore order.

Conventionally, all wall key holders can be divided into two types - open and closed.

The former are essentially any suitable base with hooks attached to it. The latter are somewhat more difficult to implement, as they are a cabinet, very often with one or more shelves.

Open key holders

The easiest option for a novice designer is to make and decorate simple wall key holders with your own hands. The photos below give a rough idea of how these gizmos should look. To design an open "key vault" you can use anything that is easy to attach hooks to. Suitable for this:

a figurine of a fish, a tree, a house sawn from wood;
any plank or old shelf;
wire braided construction;
glass or mirror.

In general, absolutely any quite ordinary object can serve as the basis for creating such a thing as a wall key holder. Photos of such devices from
conventional materials you can see just below.

Closed housekeepers

Such a kind of house (see photo) in the form of a locker will help to hide from prying eyes not only all the keys you have, but also some not quite attractive items that are usually present in the hallway (an electricity meter or a box). It is worth noting that a closed wall key holder is an order of magnitude more difficult to perform than an open one. purchase in handicraft shops and stores, as well as do-it-yourself made of wood, plastic and even thick cardboard binding houses-lockers of the most different forms and sizes. The closed wall key holder, the photo of which you see, is made using the decoupage technique.

You can decorate such a storage locker with the most different ways, techniques and styles - from painting to decoupage or plain appliqué. If you do not know how to draw and do not know other methods, just glaze the cabinet and pour colored decorative pebbles, shells or coins inside. The clock built into the key holder will not only add functionality to it, but also give it a special style and charm.

Photo frame key holder

It does not take much time, effort and money to make such a thing. It is enough to have a small old frame on hand, some acrylic paint, small screw-in hooks or glue, such as Moment or Super Glue.

First you need to go through the frame sandpaper to remove the old coating, then paint the surface with a suitable color palette, allow to dry well. It remains to screw the hooks at the bottom and along the inner upper area of \u200b\u200bthe frame.

Cutlery key holder

To make such a housekeeper, like the previous one, is not difficult at all, but it looks extremely creative. For its manufacture, you will need old unnecessary forks and spoons, a wooden plank, glue. The blanks must be painted in a suitable color, allowed to dry properly. Cutlery must be bent in half and glued with a reliable tool to the prepared surface. An extraordinary little thing for the hallway is ready.

Key holder in decoupage technique

Such an open wall key holder, wooden surface which is perfect for decorating using decoupage technique.

This is an imitation of painting, which is performed on almost any suitable surface, be it wood, plastic, metal. This is done using paper napkins, special or printed patterns you like.

To decorate such a thing as a wooden wall key holder, you will need:

napkin, decoupage card or printer printout;
plywood base;
hooks;
self-tapping screws of a suitable size for hooks.
decoupage glue (you can use PVA with water 1: 1);
synthetic flat brush;
screwdriver or screwdriver;
jigsaw;
acrylic, yacht or parquet varnish.

For the most part, decoupage is still done by women, so we take plywood, a jigsaw and go to our spouse with a request to cut out a beautifully shaped figure of a suitable size for a housekeeper from this nondescript piece of wood.

If you decide to use a napkin in your work, then it is better to process the surface acrylic paint in light, better White color. This will allow the drawing to become brighter and not “get lost” against the general background of the composition. After the paint has dried, you can continue to work. There are a lot of descriptions of methods for sticking napkins, working with decoupage cards and printouts. To create such a thing as a decoupage wall key holder, you can use any method you like and suits you specifically. The main thing is to carefully and at the same time carefully expel all the air from under the paper, smooth out the resulting uneven folds. After the glue has completely dried, the product must be covered with several layers of varnish. After applying the last layer, you need to let it dry well for a day. After this time, hooks are attached to the key holder, and loops are attached to the back side for mounting on the wall.

In the same technique, by the way, you can decorate the door and the inner surface of the closed "house".

Gypsum key holder

Making a wall key holder with your own hands from gypsum is not as difficult as it might seem at first glance.

A handmade wall key holder is an absolutely exclusive thing that perfectly suits your taste and interior.

How to ruin your mood without leaving home? Very easy, just forget where you put the keys! It is especially insulting to be late because of such a trifle for an important meeting.

Keep the keys in one place, so as not to waste time and nerves looking for them at the right time.

If you are tired of wasting time looking for the keys to your apartment, car, office, garage, basement, there is a simple solution that will allow you to forget about this problem once and for all.When a housekeeper hangs in your hallway, there is more order at home.

Checked: the sight of empty hooks is the best reminder that you need to look for right now, and not just before the exit.

Wall key holder will not only become a permanent meeting place for all your keys, but also decorate the entrance: there are many design options for this essential item in every home.You don't have to go to the store to find your dream housekeeper, you can make your own! In this article there are several workshops available in which you will find ideas for making it.

You will have to try a little, but the result will meet your expectations.

The key holder of the style, size and color suitable for your interior - a rarity. It is enough to go in search of her once to be convinced of this. You will save time if you do it yourself.
Only a housekeeper created for the house with your own hands can become the embodiment of your individuality and love for loved ones.
You will be sure that your wall key holder is made of durable and quality materials because you chose them.
You will not only enjoy creativity, but also surprise your guests with a beautiful and unusual thing in the hall.
Finally, a housekeeper made with your own hands from improvised materials will cost less!

"Keepers of the keys" are very diverse. You can choose them for a variety of interior and style of the hallway.

Deciding on design and construction

How to make a house key holder? Very simple! We picked design solutions thanks to which you do not have to spend money on expensive materials: everything you need for work is in almost every apartment.

Materials and tools:

Plywood, piece of chipboard, leather, frame;
Acrylic paints, stain;
Hooks and hangers;
Drill, jigsaw and pressure roller;
Screwdriver, spatula, awl and needle;
Sandpaper;

To realize the most daring ideas, you need only a few materials and tools.

Master class number 1: a key holder from a saw cut of a tree

Do you want your key holder in the hallway to look stylish? This master class simply and clearly describes everything that is required for this.

A few simple steps - and it can be hung on the wall.

What you need:

Spil,
Alcohol or water stain,
Abrasive sponges or sandpaper of medium or fine grit,
Acrylic lacquer,
Printout of the mirrored image,
Wide synthetic brush
pressure roller,
hooks,
Hangers - 2 pieces,
Drill,
Crosshead screwdriver.

Key holder from a saw cut - suitable option for those who like to work with wood. You can use a saw cut of any tree species, but it is better if it is pine.

Its wood is easy to process and has a beautiful pattern.

Master class number 2: a key holder from a branch

This master class is for those who often visit nature and simply love eco-style in the interior! A lot of materials are not needed, the main thing is to find a suitable branch.

This housekeeper is sure to impress your guests!

What you need:

dry tree branch,
wood stain,
Acrylic paints (optional)
jigsaw,
Drill,
Hangers.

There are no two identical branches, which means that your housekeeper will certainly be special!

This key hanger is easy to make.

We take the branch of the tree we like, wash it, dry it, saw off all that is superfluous. Now we need to decide whether we will save the bark. Option A: remove the bark, using sandpaper if necessary. Option B: the bark remains, we remove only its damaged areas.
With the help of a jigsaw, we will make a saw cut from the side where the suspensions will be and with a drill we will drill recesses for self-tapping screws.
With a wide brush we apply a stain on the housekeeper: it will not only shade the tree, but also serve as an antiseptic. After that, leave the branch to dry for about an hour.
If we have an option without bark, just cover the branch acrylic varnish. If you chose the option with bark, first we impregnate the branch with varnish diluted with water in a ratio of 1: 1, and after drying - undiluted.
If desired, the surface can be walked with a dry brush with acrylic paint suitable shade. The result needs to be fixed finishing layer varnish.
Knots will serve as hooks for keys. It remains to screw the hangers.

You can be proud of the results of your work: the housekeeper is ready.

Master class number 3: a housekeeper from a picture frame

Do you have at home old frame from a painting or a photograph? Do not rush to throw it away: the housekeeper from the frame - great way decorate the wall and define permanent place for keys!

This master class describes not only how to make a key holder, but also how to decorate it.

What you need:

Frame,
Suitable piece of plywood
acrylic primer,
Acrylic paints,
Wide synthetic brush
Sandpaper of medium and fine grit or abrasive sponges,
decoupage card,
transparent file,
Decoupage glue (or stationery pva),
Acrylic lacquer.
Key hooks and hangers,
Drill,
Crosshead screwdriver,
Jigsaw.

Necessary materials for work.

To get started, we need to know inner dimensions frames. Using a jigsaw, cut a rectangle of the desired size from a piece of plywood.We take a thin drill (with a diameter of 1-2 mm less than the screws on which we will fasten the fittings) and drill all the necessary holes.We cover the plywood with acrylic primer or white paint. When the primer is dry, sand it with medium grit sandpaper (No. 600-800) and wipe it with a damp cloth.

For the frame, use paint that matches the color.

Now we will decorate our product using the decoupage technique. Place the image on a stationery file face down and moisten it well with water, smoothing the bubbles formed on the surface from the center to the edges.Apply to primed plywood base glue and immediately attach a file with a decoupage card. Again, smooth the card from the center to the edges (it is convenient to use a pressure roller). Now the file can be removed.

If small folds remain somewhere, the pattern can be smoothed out with wet (!) Fingers. Let dry for 2 hours.

Now you can tint the frame with diluted acrylic paint. Apply acrylic varnish with a synthetic brush.We insert plywood into the frame, fasten the hangers and hooks.

If you have a lot of keys, this key holder will keep them in order.

Additionally, you can hang tags with numbers. And to make it easier to navigate, it’s enough to stick signs under each of the keys with the inscriptions “From the basement”, “From the dacha”, etc.

Master class number 4: key holder made of plywood or chipboard

Do you have plywood 6-10 mm thick or a piece of chipboard? Remaining shelves from old bedside table? It is worth arming yourself with a jigsaw, and you will have an exclusive wall key holder made of materials that you did not even hope to use!

It is much more aesthetic when there is an original little thing in the hallway.

What you need:

Pattern,
jigsaw,
Drill,
wood putty,
Putty knife,
Key hooks and pendants.

We find a suitable picture on the Internet, install the right dimensions and print. Simple generalized forms look spectacular: a fish, a key, a leaf, the contour of a flying bird, cats ...

For novice designers, it's great to try your hand at creating public key holders.

The pentagon easily turns into a house for keys. Even an ordinary circle can be beaten if, by adding a few details, to build from it, for example, a similarity hot air balloon. We cut out the figure along the contour and circle the resulting pattern with chalk or a simple pencil.Now you need a jigsaw.

Carefully, slowly cut out the selected figure along the contour.

It happens that chips form on plywood when working in this technique, especially if the plywood is not of its first youth. It is in our power to make the surface and even the ends of the key holder smooth. We arm ourselves with a spatula or palette knife and apply wood putty to problem areas. We are waiting for complete drying.

We sand with sandpaper, first medium, and then fine grain, paying special attention to the ends.

With a drill we make recesses for suspensions and drill holes for self-tapping screws, on which hooks will be held.

Turn on your imagination at full power and create!

A do-it-yourself key holder can be decorated using the decoupage technique, as described in the previous master class (in this case, we will additionally need glue and a suitable pattern).

It remains to screw the fittings and hang it on the wall.

Master class number 5: leather key holder

How else can you make a key holder? If you think that the best place for keys is a pocket, our master class is for you.

The key holder, made in the described technique, will not require much effort.

What you need:

Pattern,
Thick skin (useful old bag),
Lining,
Lightning,
strong threads,
thick needle,
Awl,
buttons,
Key carabiner,
Scissors.

What materials to use and how to decorate the key holder you decide for yourself.

The more keys you have, the larger the pattern should be. Exactly according to the pattern, we cut out all the details from leather and suede. Connectingdetails of the outer part and lining.

To make the product look neat, trim the edges with scissors.

It remains to unscrew our key holder and admire the result. We attachcarabiner - and a leather key holder in your pocket!

Now, no matter how many keys you have, they are all in one bunch.

Decorating the housekeeper: ideas and solutions

Your housekeeper is almost ready. It's time to add some more charm to her! Shabby chic or Provence, cyberpunk or country, ethnic style or retro, painting or embossing... It's up to you to decide in what technique and in what style the key holder will be decorated.

This can be done with the help of improvised materials, so we are collecting ideas.

If the old clock is broken, you can use a few gears, 5-6 unnecessary keys and a little glue - and your steampunk key holder is already decorating the hallway! If you are into decoupage, you may have craquelure polish and wax patina.

This is enough to give the product the look of an antique: you get a retro-style key holder.

Stencil and putty - and the key holder is covered with a three-dimensional pattern. Got small nails and thread? Take a hammer, draw a few lines on the board, drive in nails and wrap them with thread - your panel key holder will be super stylish! If old forks or spoons remain, bend them and nail them to wooden base- the housekeeper is ready to take its place on the wall.

Ideas are everywhere, you just have to look around!

Twine scraps, buttons, chains, beads, castings made of plaster or self-hardening plastic, cardboard cuttings, ice cream sticks, splinters ceramic tiles- any little thing that lies idle at home can become final touch for something you will be proud of.

The time you could spend looking for keys is now put to better use!

Wall-mounted key holders fit perfectly in the hallway - plus you don't have to look for keys all over the house. This is the main plus of any housekeeper: saving time. In a couple of weeks, you will develop a habit in the evening, when you come home from work, hang a key on it, and in the morning, when you leave for work, take it off. As a result, you no longer need to search the apartment in search of missing keys, and you are always aware of who is in your family at home - just look at the key holder and see if all the keys are in place.

The practical side is not the only advantage. There is also aesthetics, because you can decorate the key holder in any style. Do you have an eco hallway? Nothing will fit into it better than a tree branch key holder. High tech ? A small stylish metal key holder will suit him. Provence? Decoupage with flowers or birds. Classic? Wooden lacquer board of a strict form.

In any home store, you can find something that suits you personally. But there is another approach: to make a housekeeper with your own hands.

It has advantages:

Originality. A hand-made thing will always be different from a similar one, but made on a conveyor. Processing features inherent in each master, interesting design solutions - even making a housekeeper according to the instructions, you will know for sure that no one has the same one.
Diversity. At home, even without experience, you can make more than a dozen different housekeepers. From a wooden cut, from a box, from a wire, from a branch, even from forks - there is always material, you just need a little patience to handle it carefully.
harmony. A purchased key holder might fit perfectly in your hallway, but you need to find it first. A handmade one will fit like a native - because you will work on it, having come up with a design and knowing how it will fit.
Interesting experience. Making something with your own hands is not only useful - it's also entertaining. If you have kids, you can team up with them to turn the simple key holder into an adventure. And if there are no children, you can just enjoy the process.

Homemade key holders are different - from different material, different designs. Before you get to work, you need to figure out what you need.

What are the keys?

There are two ways to classify keys.

The first is by design:

open. These are usually made by hand, as they are easier to perform. They are any hooks on which you can hang keys driven into anything. Board with nails? Open. Branch with knots? Open. Leather cut with pockets? Open.
Closed. These are more difficult to make - some carpentry skills are required. They are a cabinet that closes with a door. The door will have to be hung on hinges, otherwise it will quickly fall off. They allow you to hide what exactly is inside, protect the keys from prying eyes. Shelves can be built into them for useful little things, hang a mirror on the door and expand the practical application in a different way.

The second way is according to the materials that were used.

Corks from wine bottles can be considered a kind of wood - you can also make a beautiful key holder out of them. But it will not work out of paper - it will wear out too quickly. It will also not come out of glass or stone - it is difficult to find material, it is even more difficult to process.

Advice

When choosing a material, focus on three indicators: what will be easiest for you to work with, what will fit best in your hallway, and what will you definitely be able to get. Once you've decided, get started.

How to do it yourself?

Before starting work, it remains to remember the basic rules that guide all masters:

In the process, you should not interfere. Ask your family to give you a couple of quiet hours, close the door and do not be distracted.
The place of work should be well lit. Doing something with your hands in the light of a dim light bulb is not only harmful to the eyes, but also simply inconvenient.
Everything should lie in its place. This is important when you are working with sharp objects. Having finished cutting plywood or a metal sheet, the jigsaw or knife should be placed in a conspicuous place, where you will not lose it. Otherwise, you can get hurt.

The simplest: cardboard housekeeper

Cardboard is the easiest material to make a housekeeper out of. You will need:

sheets of thick cardboard - plain gray color, can be found in the house, or you can buy a set;
a suitable drawing on photographic paper - you can print it in any stationery store, and choose your taste by searching the Internet;
decorative screws with beautiful hats, an awl;
piece of wire, brushes, varnish, glue, sponge.

The work instructions are simple:

cut out the desired shape from four sheets of cardboard - a circle, a square, a heart, it all depends on the imagination;
with an awl, pierce two holes in the upper part of one blank figure - for a loop;
insert the wire into the holes, twist so that it does not fall out;
on the side where the twisted wire remained, glue the rest of the blanks;
on the front, mark the holes for the screws and pierce them with an awl.

At this point, the preparation of the key holder itself is obtained. The rest is essentially decoration:

put the photo face down, wet the sponge, wet upper layer, and then roll it up, pressing lightly;
dry the photo, grease it with glue with a brush and stick it on the workpiece;
varnish everything together to achieve greater strength;
insert screws.

The result is a simple keychain. It is not very strong, it is afraid of moisture, it can tear if you pull hard on it, but it is easy to make, the materials cost almost nothing and the result looks decent. Especially if you like bright varnished drawings, and in the hallway you have a simple repair, without design frills.

Advice

This key holder is good as a gift for older relatives. Grandparents will be delighted to receive a little thing in which a photo with the faces of their beloved relatives and at the same time come in handy in the household.

Perfect eco-style: make from a branch

A branch as a key holder is fresh, original and fits perfectly into the eco-style. You can find it in the nearest park (you may have to spend a few days), and it will not be difficult to arrange it. Need:

dry branch - a wet tree will quickly begin to rot, lose its appearance;
stain, jigsaw, drill, sandpaper, hooks (you can buy special ones in the store, you can use thick nails).

If desired, you can place a varnished pattern over the branch that will complement it. You can hang beads, feathers and decorative keys on bright threads from it. You can carve anything on wood - from a few letters to a simple drawing.

For connoisseurs of strong drinks from corks

It is good to make a cork key holder with children, because most of all this process is similar to trying to assemble a mosaic without a picture that shows the end result.

You will need:

photo frame - you can glue it yourself, or you can buy it;
about twenty corks from wine bottles;
PVA glue - not a pencil, but in a jar;
nails with beautiful hats or hooks.

The following requires exceptional skill:

take a cork, smear it on the side and ends with glue, insert it inside the photo frame so that it is adjacent to the frame from the inside;
take the next cork, smear with glue, attach to the first.

The process is close to meditation: you need to fold the corks so that they perfectly fill the space of the frame. The resulting result should be left to dry overnight, and then varnished and inserted into the soft cork wood key hooks.

The advantage of such a housekeeper is its uniqueness. Just as there are no two identical branches, there are no two photo frames filled with corks in the same way. To give the design a chic, you can paint the cork different colors, burn or cut letters on them.

A simpler option, more suitable for eco-style, is to find a thin stick and hang corks on bright threads. Drive a hook into each cork and hang the key on it.

Advice

A simple version with corks will only look appropriate in a minimalist interior or in a hallway that is full of fun accessories. AT strict styles- in the same classics and hi-tech - he has no place.

Classical beauty: from saw cut wood

Despite the spectacular result, the process of making such a key holder is no more difficult than working with a tree branch. The only problem you may face is the difficulty of finding a pine saw cut while living in the city. But you can either find a fallen tree branch and saw off a piece from it, or turn to village relatives.

You will need:

round saw cut of a tree - a circle two or three centimeters thick, sawn from the end of a log, and it is best that it be pine;
stain, sandpaper of different grain sizes, varnish;
wide brush, hooks, drill, screwdriver;
printout of the image previously unrolled in a mirror.

Putting it all together is simple:

process with sandpaper - first medium grain, then fine, and only along the fibers, otherwise ugly scratches form;
moisten with water so that the wood swells slightly, leave to dry;
cover with stain (preferably water, because it hardens longer and all errors can be corrected in the process) three times to get a beautiful bright color;
varnish the prepared printout, then cover the front side of the back with it, press the printout against it, gently smooth it out so that there are no bubbles;
after the printout is dry (it will take two to three hours), moisten it warm water, slowly remove until the pattern appears - clean off the remnants of white;
on the back side of the key holder with a drill, drill holes for the hook on which it will hang, and on the front side - holes for the hooks on which the keys will hang.

The drawing can be anything, the main thing is that it be black and white - it will be possible to convey the colors with the help of varnish, but they will not be as bright as on the original. You can do without it at all, then the noble texture of the treated wood will decorate the hallway.

Advice

A wooden saw cut is well suited to classic interior. good decision will also select its shade so that it matches the color of the furniture. In extreme cases, you can go over it with a dry brush with acrylic paint to get the desired color.

Quality for decades - made of metal

Working with metal is tricky, especially if you've never done it before. But if you start with a housekeeper made of ordinary wire, it becomes clear that perseverance will overcome any difficulties. You will need:

thick wire - a few millimeters in diameter;
sharp scissors - best for metal, but ordinary wire cutters will do;
pliers, hammer.

The manufacturing process is simple:

find an interesting outline drawing on the Internet - for starters, something simple, like an intricate spiral, square, circle, stylized cat;
try to repeat the pattern with the help of wire - it should be bent by holding one end in pliers and fixing the other with your free hand;
sharp corners can be obtained by pressing them down with a hammer head; it is enough to curl smooth lines with pliers;
when the figurine is ready, you need to attach hooks from the same wire to its lower part, and fasten a thin wire at the back, on which you can hang the whole structure.

An interesting variation on this same idea is the use of a hanger. It does not need to be bent with pliers and beaten with a hammer. It is enough just to hang hooks on its lower part, and decorate the main part with anything, from the gears of an old watch to banal flowers from colored paper.

More hard way make a key holder out of metal - use a thin metal sheet, which can either be found in the remains after repairs, or bought in a store that sells hobby goods.

You will need:

thin metal sheet;
sharp scissors, nail, sketch drawing, hand drill, hooks;
a tool that will make the metal airtight and protect against rust.

The drawing cannot be any - only the one that can be cut out of metal. Silhouettes are best suited - animals, fish, plants, castles. Any is enough simple shapes. You can show your imagination and come up with an abstract figure.

Before more will remain:

cut out a silhouette from a sheet with a pattern;
attach the silhouette to a metal sheet, circle with the tip of a nail;
carefully cut along the contour, making sure that there are no ugly notches left;
with a hammer, bend the sharp edges that may turn out in the process;
drill holes for hooks;
cover the resulting base with a sealant, let dry;
insert the hooks into the holes, fasten the mount at the back.

In the form of a cloud

Instead of plywood, you can use thick paper or fabric with embroidery. You can even leave the frame empty by attaching the hooks directly to it - this will also be beautiful in its own way.

Advice

It is important to ensure that the pattern fits the interior. For hi-tech, birds with flowers will be alien, for rustic style the city of the future will not work either.

Artistic sawing out of plywood

Perhaps the most difficult of the open key holders is this one. Plywood that you could have left after repair, in the form of a shelf from unnecessary furniture or rear wall from something, the material is cheap, but capricious. If you work with it carelessly, it may crack, after which it will not look as beautiful as we would like.

But it can be given any shape, cut out of it any silhouette or word.

You will need:

jigsaw, drill, spatula, wood putty, varnish;
hooks for keys, directly a piece of plywood.

You will also need a sketch. As in the case with sheet metal, simple silhouettes are best: a cloud, a cat, a word, a flower, even an ordinary circle that can be turned into the moon. You can go further and make a double key holder: give it a shape, and then cut out the individual elements.

This idea can often be found: a key holder in the shape of a house, sawn separately elements in the form of human figures. Each has a key attached. When a person wants to take it, he takes out the figurine and leaves with it in his pocket. By the remaining voids, one can easily understand who is at home and who is not.

The technology, however, is the same:

take plywood, fix it well so that it does not slip out;
start sawing, carefully removing a thin layer of plywood - the movements of the jigsaw should be directed in one direction, intensify from beginning to end;
drill holes for hooks;
process the edges with sandpaper, if cracks are obtained, seal them with putty;
coat the product with varnish, let dry;
insert hooks into the holes.

To make the key holder brighter, you can paint it in any color with acrylic paint before varnishing. You can put a drawing on it, you can cut a simple pattern with a jigsaw. The main thing is that the result looks harmonious, fits the main interior.

Advice

Plywood key holder can fit any style. The question is how do you arrange it.