In winter, one of the most significant holidays of the year is celebrated - the New Year. The celebration stretches over several days, affecting the Christmas holidays. By this time, each person seeks to decorate his apartment or private house using festive illumination.
It is not necessary to buy lamps in the store: you can make an LED garland yourself, and we are talking about stand-alone devices that are powered by batteries, or more demanding industrial ones that are connected to a 220 V AC mains. A product made by one's own hands will seem much more attractive and brighter, so it will become the main New Year's decoration in the house.
LED garlands do not cost too much, but it is still much more pleasant to enjoy your own creation. In addition, you can create a light source that fully meets individual needs. Finally, the cost of homemade will still be several times less.
Features of mounting a garland with your own hands
To begin with, let's figure out how the garlands are arranged and what are the main differences. The main fundamental difference is the scheme used, depending on which the garlands are divided into several types:
- classic garland-thread;
- grid;
- curtain;
- icicle;
- duralight (a kind of LED strip);
- keeplight;
- strobe light with unique shimmer.
Important! You should pay attention to the power of the LED diodes used. Products operated outside have a higher efficiency, since almost all the energy is converted into a glow, and not heat, as is the case with conventional garlands, and is most clearly visible when using an incandescent lamp.
These devices are protected from various negative factors, including precipitation, extremely low or high temperatures, strong gusts of wind, moisture.
Selection of necessary materials and element base
To make your own LED garland, you will need the following tools, materials and components:
- soldering iron with rosin and solder;
- insulating tape;
- heat-shrinkable cambric, which increase the insulating properties;
- LEDs;
- resistors.
LEDs can be obtained by dismantling non-working computer accessories - keyboards and mice. The correct functionality of a home-made garland depends on the quality of the selected components and connections, the reliability of the operating scheme.
When diodes are connected in series, they will work, but the voltage will increase significantly, which will increase the amount of heat generated, and ultimately lead to a breakdown of the device. This is the main reason for the use of resistors that reduce voltage and change other input current characteristics, due to which there is a color change when the sources glow.
LED selection
The main elements of the garland are LEDs. The main technical and operational parameters are considered to be the operating voltage and current flowing in the forward direction. Both characteristics will be needed to calculate the electrical circuit and power consumption.
On average, the LED operates at a current of 20 mA. To reduce the amount of electricity consumed, resistors are used, and the resistance value of this element depends on the parameters of a particular led diode. On the network you can find many calculators that allow you to perform a simple and quick calculation of the resistor for the selected LED.
The supply voltage of the element indicates the moment when the voltage drops at the p-n junction, which occurs due to the internal resistance of the product. In other words, if we are talking about a 12 V power supply and 3 V LEDs, then no more than four of these devices can be connected in series, since each of them reduces the supply voltage (12 V) by its own value (3 V). If you add a fifth element to the circuit, then it will practically not glow.
The voltage depends on the specific manufacturer and the colors of the LED. For example, diodes with blue, white and green crystals have an operating voltage of 3 V, yellow and red - 1.5-2.5 V. The power consumption of diodes is calculated according to one of Ohm's laws: P \u003d U * I, where P is power , U and I are voltage and current, respectively.
If we consider the values \u200b\u200bgiven above, then when they are substituted into the formula, we get the following value: 3 (V) * 0.02 (A) \u003d 0.06 W. When 4 LEDs are connected in series, this characteristic will increase to 0.06 * 4 = 0.24 W. Connecting a limiting resistor in series will increase the voltage by another 0.06 W, so the total power consumption will be 0.30 W. If you are using multiple groups of 3 LEDs that are connected in parallel, then this value must be multiplied by their number.
Important! These are not the main characteristics of LEDs. It is also important to consider light output, glow angle and color temperature. Light output can be calculated depending on the dimensions of the product: for elements with a diameter of about 5 mm, this value is 1-5 lm. White and blue crystals shine much brighter than colored ones. They are even super bright.
The luminous intensity of a 1.8 V red LED diode is 0.2-2.0 cd, white - 10-20 cd. However, these characteristics do not make any adjustments to the calculation scheme and are selected solely on the basis of the purposes of further operation of the device.
Choice of resistors
When choosing resistors, you need to focus on power and resistance. The second parameter depends on the number of LEDs connected in series to the circuit and their operating voltage, power - on the magnitude of the current. A 0.125W resistor will almost always suffice.
When operating LEDs with a voltage of 3 V, it is customary to use resistors with the following resistance, depending on the number of elements:
- 1 LED - 470 Ohm;
- 2 - 300 Ohm;
- 3 - 150 Ohm;
- 4 - 1 ohm.
If it is planned to operate diodes with a voltage of 2.1 V, then the dependence will be as follows:
- 1 LED - 510 Ohm;
- 2 - 390 Ohm;
- 3 - 300 Ohm;
- 4 - 180 Ohm;
- 5 - 75 Ohm.
Selecting a power supply
In the case of an LED garland, a 12 or 24 V power supply must be used with a margin of output power (approximately 25% on top of the total power consumed by the circuit). The choice of a particular block depends on the number of LEDs - for a circuit with 7 or more elements, it is desirable to use a 24 V product.
The 24W unit allows switching 11 diodes connected in series at 2.1V or 6 at 3W. A small 24V, 0.5A power supply with a 12V output will almost always suffice.
Calculation of the connection diagram
Even series-connected LEDs must contain a current-limiting resistor in the circuit:
- red elements with a voltage drop of 1.5-2 V - a 420 Ohm resistor;
- green and blue at 3-3.2 V - 82 and 75 ohms, respectively.
You can use a standard 220 V controller for RGB technology with a common anode: all channels are negative, and the common cable is positive.
Making a garland of LEDs
With LEDs connected in series, you can create a flickering garland. It will take a minimum of time to create it, and almost every person with basic knowledge of electricians will be able to cope with the task. The most important thing in this case: clearly follow the instructions.
To assemble your own LED garland with your own hands, you need to follow the steps in the following order:
- Decide on the desired distance between adjacent sources (diodes).
- After unwinding the wire, use a marker of any color to make appropriate marks on the places where the LEDs are supposed to be installed. Ideally, the distance between them should be 200-250 mm.
- At those points where marks were left, remove the insulation from the wire, creating "bare islands" 20-30 mm long. Be careful not to damage the cable itself. This will simplify the process of future mounting diodes.
- On such areas you need to apply rosin with solder.
- Fix the LEDs to the formed influxes by connecting their legs with a wire with a soldering iron. Please note that this mounting option will be less reliable, so you will have to use reinforcing clips, which will also cover the bare parts of the garland.
- Cut a narrow adhesive tape into different pieces 30-40 mm long, then use it as insulation for diodes. As a result of these actions, each LED should be located in a "pocket" that holds it firmly on the cable. You need to wrap all the light sources on the wire.
- Then you need to ensure the sealing of the upper part of the "pocket". For this, silicone sealant will do, which not only increases the strength of the structure, but also improves the glow.
- It remains to connect a resistor and a power supply to the circuit, and then test the operation of home-made equipment.
Note! This type of garland is not afraid of the cold, so it can be used in outdoor illumination systems. In this case, it is recommended to use power supplies for 8-12 V. To check the performance of the product, you can use a smartphone battery, a power supply from a phone charger.
Preparing to create a battery-powered LED garland
The LED garland connected to batteries looks no less beautiful. In addition, such a product will be as safe as possible for children. This type of illumination is used as an outdoor light source. When moving in the air, a bright multi-colored trail will remain, which designers often use to create various patterns in space. The product must be protected from wind, precipitation and low temperatures.
To make a battery-powered garland, you will need:
- LEDs with a diameter of 10 mm in different colors with a scattering effect;
- magnets with a diameter of 1.3 and a thickness of not more than 30 mm;
- electrical tape or narrow tape;
- lithium battery (for example, CR2032 3V);
- epoxy adhesive.
The process of making a garland on lithium batteries
To create a bright shimmering garland, you will need to perform high-quality soldering. There is no need to rush into the process of doing the work. Be patient, be careful and attentive, follow the steps:
- Test the LEDs to see how bright they are. In turn, connect the components to the lithium battery (one, longer leg, connect to the “plus”, the other short leg to the “minus”).
- Fix the position of the diodes, then wrap each element together with the battery with tape or electrical tape in 2 layers.
- Align the magnet with the positive terminal of the battery, fixing it.
- Each part of the structure must be installed on a thin wire. Check the functionality of the product!
Using resistors in pairs
In this case, you can reduce the cost of the product by making it more economical, but remember: it is much better from the point of view of electrical safety and equipment durability to connect each LED to its own resistor. In addition, the latter components are cheap.
How to make a garland of light bulbs with "running lights"
To create a festive illumination with "running lights" you will need at least 3 garlands, and each of them should consist of several groups of "flashlights" connected in parallel. To recreate such a glowing effect, you need a three-phase multivibrator with transistors, which are designated VT1, TV2 and VT3. A 0.1 uF capacitor is installed in the arm of the second transistor, which greatly simplifies the launch of the product.
Making a garland from an old keyboard
To speed up the creation of a garland, you can use one of the most budgetary options associated with disassembling old computer input devices - mice and keyboards.
In the process of doing the work, you will need:
- several old keyboards that may not even be functioning;
- soldering iron;
- resistors;
- electrical tape or tape;
- heat shrink tubing;
- solder and rosin.
First remove the wires from the keyboard and unplug the USB cable. To increase the chances of doing quality work, you will need about 5 input devices: perhaps your friends, relatives, ask around on the city forum.
Each keyboard is equipped with 3 LEDs that indicate the operation of the 3 main functions of the product on the Num Lock, Caps Lock and Scroll Lock buttons. If you come across an unnecessary gaming keyboard, then everything will be much easier, because it often includes a huge number of LEDs.
Disassemble the product and remove the small board with the controller from it. It will be used to connect various light bulbs. Create a product of 12 elements connected to resistors in parallel. You should not exceed this value, since the standard USB cable that powers the keyboard transmits voltage up to 5 V at a current of 500 mA.
The operating voltage of individual elements does not exceed 5 V. With a direct connection without a resistor, overheating will occur, which sooner or later will lead to burnout of the components. That is why the voltage is reduced due to additional resistance or by pairwise soldering of elements. In the second case, each individual component will lower the voltage of "its neighbor". Unfortunately, this option is considered less optimal and effective: it is best to follow the set voltage limit and not go beyond them.
Creating a home-made Christmas garland of LEDs is as easy as shelling pears: stock up on the necessary elements and tools, perform the calculation (experts can help with this) or find any proven connection scheme on the net. Then follow our instructions, and in the end you will get a functioning, high-quality and safe product.
The desire to prolong the fabulous Christmas time with the help of magic lights gave rise to the tradition of decorating not only Christmas trees, but also other items with their help, garlands in the interior appeared at weddings and graduation parties. Now flashing lights are often used not as a festive, but as an everyday decor. This allows you to give the room a solemn look, highlight the most spectacular details of the interior with light, create an unusual atmosphere.
Decoration options with electric garlands
Circuit
Decorating with garlands is appropriate if you want to emphasize the graceful silhouette of a fireplace, an antique wardrobe, a staircase or a mirror. Outline the subject with light bulbs. This is easy to do: place the center of the garland on a cabinet or the top of a mirror frame, and direct its ends along the contours of the object, leaving them to hang freely. You can also secure them with tape or buttons.
Flashlight
The garland in the interior can be used as an unusual lighting fixture. Take a beautiful transparent vase or candlestick and fill its volume with a garland - one or more. In this case, garlands with LED lamps are especially convenient, even better if they are powered by batteries. Such a decorative item will become a bright accent addition to the interior of any room - from the bedroom to the living room.
Picture
Draw a glowing heart, candle, Christmas tree, or star on the wall. To do this, mark the drawing with a pencil or chalk, and lay out a garland over it using tape, buttons or small carnations. You can also use double sided tape.
inscriptions
Use a garland to create inscriptions. To do this, mark the arrangement of letters on the wall with a pencil or chalk, and lay out the garland using buttons or carnations.
Imitation fire
With the help of decorating a fireplace with garlands, you can create an imitation of a live fire. It doesn’t have to be a real fireplace: a decorative woodpile on a tray, a bunch of branches wrapped in a single-color flashing garland will remind you of a real flame. This decoration looks great in a decorative fireplace, under a Christmas tree or even just on a coffee table.
Drapery
Small light bulbs look especially decorative if they are covered with a translucent cloth. So you can decorate the head of the bed or the wall above the sofa. Illumination with garlands of curtains will give the room an atmosphere of fabulousness.
Gallery
A garland in the interior can be used as a basis for creating a gallery of photographs or drawings. To do this, you need to fix it on the wall - in a wave, a straight line or a zigzag. Use decorative clothespins to attach a selection of photos to the garland. Instead of photographs, you can attach snowflakes cut out of foil, New Year's cards, small figures of New Year's characters on clothespins.
Wreath
At Christmas, it is customary to decorate the doors of the house with wreaths. Usually they are woven from spruce branches and decorated with a variety of decor, braided with ribbons. You can make a wreath in the shape of a heart, decorate with a garland - it will be unusual and bright.
There was a time when real candles were used to decorate the Christmas tree. They were lit, and although the Christmas tree became more beautiful and bright from this, it could catch fire from the fire, it was risky. Therefore, later appeared specifically as a festive decoration for the Christmas tree garlands of electric light bulbs. It has become less dangerous, in addition, electric garlands look more elegant than ordinary candles.
A lot of time has passed since then, it has become customary for us to use just such garlands to highlight toys, rain and other Christmas tree decorations. The choice of electric garlands has become richer. There are light bulbs in different colors. And if you want, stop your choice on garlands that blink, as if bewitched by a fairy-tale sorceress. It is not for nothing that some peoples call this wonderful decoration “fairy lights”.
Of course, such a wonderful decoration should be used not only for the winter holidays. They can also be seen as part of the decoration of an anniversary or birthday, wedding, matinee in kindergarten or prom at school. Wherever they are not! It is difficult to list all the cases when this spectacular decor is successfully and successfully applied.
And in an apartment, an electric garland can become an element of decor. Due to the fact that individual objects (for example, a mirror, a picture, a fireplace, a window frame) will glow along the contour, the whole situation will instantly change, some objects will stand out, and something will disappear from view.
It is easy to decorate the interior with the help of garland light bulbs, to do this, fix it on the bed or on the mirror, repeating its shape, place it on top of the closet, on a shelf, chest of drawers so that free, unfixed parts hang down. Thus, you can highlight any object or interior detail.
If you want your electric garland to decorate the wall in the apartment, it must be fixed. Use tape (regular or double-sided). If the wall is drywall, then pushpins will help you.
To make "magic" lanterns using an electric garland, use any containers through which light bulbs will penetrate. It can be bottles and bottles of interesting shape, glass or plastic jars, crystal vases, candle lanterns. Place the garland in the containers of your choice and your fabulous shining lanterns are ready. Looking at them, it is easy to believe that wizards take the lights from these lanterns to light the Christmas tree.
For decor from the entire range of garlands, battery-powered LEDs are more suitable, microbulbs will probably be more convenient than usual ones.
Among the options for using decorative electric garlands, there is a very creative one, namely a pattern from a garland. You can depict anything from what is on the topic closer to the holiday. It can be an asterisk, a snowflake, a heart, a Christmas tree, a house or something else.
Small light bulbs in a garland can resemble a light that smolders in the stove. Take advantage of this to decorate a decorative bonfire with a garland. You will need some branches or firewood, you can take stones. Arrange these items on a tray somewhere in the apartment, for example, near a Christmas tree or inside a decorative fireplace, lay a garland on top as if they were embers.
In some place of your apartment, for example, above a bed, a sofa, you can make a drapery of thin fabric that will let in the flickering glow of light bulbs. The smaller the size of the bulbs, the softer the glow. This drapery looks very impressive. So you can decorate the curtains on the windows, canopies over the bed. With this decor you will create the atmosphere of a fairy tale. Shiny fabric is a great decoration for your home.
The garland of light bulbs can be used as a holder for a gallery of funny and cute photos that remind you of the joyful moments of your life, and now you are going to hang them for decoration. The wire itself can be fixed on the wall in any interesting shape. A zigzag shape will do, and if you want, place it in the form of a wave. You will need clothespins to keep the photos firmly on the garland. Instead of photographs or along with them, hang images on the topic. If it's the New Year, then use postcards and drawings with a Christmas tree, a snowman, Santa Claus's sleigh, etc.
Garland wreath
At Christmas, it is customary to hang a festive wreath in the apartment. And here you can use a garland. The frame, which must be in a wreath, is made of strong wire or slats, branches. The shape can be both ordinary and special (a star, for example). Make a braid for a wreath from an electric garland.
In anticipation of the New Year, the whole of December passes, and very soon the smell of Christmas trees and tangerines will be in the air. And in order not to waste time, you can slowly start choosing gifts for relatives and friends, as well as decorate your house for the meeting of the year of the yellow (earth) dog. You can start the preparatory work with the selection of New Year's decor, which will help you plunge headlong into the festive atmosphere. One of the main attributes of any New Year's decor is a garland. Today Dekorin will tell you about what New Year's garlands are, and also give you some design ideas for interior and exterior decoration for the New Year 2019.
New Year's garlands 2019 - how to create a festive atmosphere
New Year's garlands of 2019 are an important attribute for creating a festive mood. With their help, you can easily make a stunning illumination that will add a feeling of warmth and comfort to your home. Note that even if you did not find other decorations, these luminous lights will help to decorate the New Year's interior even without them.
Using Christmas garlands, you can:
- decorate the Christmas tree;
- decorate a fireplace
- use them to create New Year's pictures;
- decorate the window
- use to decorate curtains, ceilings, window and door openings;
- hang on the wall, using in the New Year's composition;
- highlight architectural elements;
- decorate the exterior.
So, let's take a closer look at the possible ways to use Christmas garlands for decoration.
Christmas tree garland - an outfit for a green beauty
Since ancient times, the Christmas tree has been considered the main character of the New Year's ensemble. Therefore, special attention has always been paid to its decoration. The star rightfully takes its place on top, decorating the top of the Christmas tree, and balls, various Christmas toys, rain and, of course, a Christmas tree garland complete the festive composition.
Christmas tree garland can be of the following types:
- LED Christmas garland. A Christmas tree decorated with such garlands looks especially delightful and elegant in the evening: when the lights go out and only flickering lights scatter their highlights around the room;
- Christmas garland made of various materials. Such a garland can take various forms. For example, a fabric garland in the form of little men, flags, various geometric shapes, or a garland of buttons, cones and other improvised materials. Such a Christmas tree garland will look spectacular on a Christmas tree in the daytime. And in the evening, for a more interesting look, it is recommended to use them in a duet with LED Christmas garlands.
Fireplace decoration - Christmas garland on the fireplace
The fireplace, as a rule, occupies a central place in the room and attracts the attention of households and guests. It adds comfort, warmth and peace to the space during the winter months and also helps to give the room a fabulous look for the New Year. Therefore, do not miss the opportunity to use it as an element of New Year's decor. New Year's toys, fir branches, candles, Christmas socks, ribbons, branches with berries and, of course, a New Year's garland on the fireplace will help you decorate the fireplace.
New Year's garland on the fireplace can be artificial, fresh (made from fresh fir branches, cones, berries) or LED. Alternatively, they can all be combined with each other.
If you have a decorative version of the fireplace at home, then you can create the illusion of a blazing fire using Christmas garlands and logs, or you can place LED Christmas garlands in glass jars and then install them inside the fireplace.
You can see examples of decorating a fireplace with New Year's garlands in the photo below.
Christmas garlands pictures - 5 beautiful photos
New Year's garlands of the picture look very impressive and festive. They will become an original addition to the New Year's decor at home and will illuminate the walls in the dark. How it looks, we invite you to look at the photo below.
New Year's garland on the window - a holiday for yourself and people
Decorating the house for the new year, do not forget about the design of the window. After all, then you will add a festive mood not only to yourself, but also to people passing by your windows. Alternatively, you can simply hang a New Year's garland on the window, or, by adding other New Year's decor items, create a fabulous alluring composition. Note that curly garlands that emit light will look especially impressive. A Christmas garland on the window is a great option for decorating your home and creating a good mood for yourself and your neighbors.
New Year's garlands curtains - 8 photos in the interior
A beautiful decor for curtains, walls, ceilings, windows, doorways and even the exterior of the house for the New Year 2018 will be New Year's garlands curtains (curtain). They are "flowing streams" decorated with luminous lights. Due to this, New Year's garlands curtains look very alluring and gentle. By viewing the photos below, you can see for yourself.
How to decorate the exterior of the house for 2019 - Christmas garlands for the street
To make your house look festive not only inside, but also outside, use New Year's illumination for its exterior. Then not only you can enjoy the luminous beauty, but also your neighbors. And the exterior of the house will sparkle with new colors, welcoming the spirit of the New Year.
Christmas garlands for the street can be decorated in different styles. New Year's LED garland is perfect for decorating the exterior of the house for the New Year 2019. Also, New Year's garlands for the street can be decorated using fir branches, bows, twigs, cones. When creating a garland for the street, we recommend using lights and LED bulbs that will help beautifully illuminate your home and create a festive mood for passers-by. Below are photos of a beautiful and original home decoration for the New Year.
Christmas garlands for holiday decoration - 65 decor ideas updated: December 25, 2018 by: Evgenia Elkina
For many centuries, people have been striving to make the walls of their homes more beautiful and interesting. This desire is especially increased during the holidays. Therefore, this article will talk in detail about funny and relevant wall decorations for the New Year 2020.
Most pre-holiday chores are very pleasant. Especially decorating a home, place of work, study. The wall occupies almost a central place in this matter. Even if there is no Christmas tree in the room for the New Year, but the wall is beautifully decorated, then the festive mood will be up to par.
Here's how you can decorate the wall for the New Year 2020:
- garlands;
- paper applications;
- compositions from natural materials;
- satin ribbon appliqués.
But the ideas for decorating walls for the New Year do not end there! There are a lot of ideas, you can also not only draw inspiration from ready-made ideas, but also come up with your own options by improvising. For example, a wall can be decorated with an impromptu Christmas tree made from paper pieces.
Also, to decorate the wall for the New Year, you can use unusual ideas - it is not forbidden to attach a Christmas tree created from several wooden sticks of the same thickness but different in length. Ideal for decorating a large wall for the New Year.
It will be very original if you decorate for the New Year Wall Clock. It would be nice to decorate them with ribbons, cones, tinsel, artificial or natural spruce branches.
Also, you can do something like New Year's picture. This will require a frame or baguette, Christmas decorations, ribbons, bows, and other decor. Tie the balloons to the frame, hang it on any empty wall, wherever you like. Let's take a look at some interesting ideas:
Use wreaths or tree branches to decorate the walls. As a decor, take small Christmas balls, bows, ribbons, snowflakes.
Wall decoration for the New Year in the following ways can be done:
- at home;
- at work (for example, in the office, in the store);
- in kindergarten;
- at school.
Festive decor will give kindergarteners, schoolchildren, employees a great mood, create an amazing New Year's mood.
Decorate the wall for the New Year
There are a lot of options on how to decorate a wall for the New Year, but the most popular of them deserve special attention. Below it will not be superfluous to explore several beautiful ways of decorating and bring to life the ones you like the most.
Garland decoration
Many people use garlands to decorate their homes not only on this holiday, but throughout the year. This is not surprising, because bright, glowing lights can make any room boring and even quite original.
As for the winter celebration, in honor of it, in order to decorate the wall with a garland for the New Year, they make Christmas trees. More precisely, a figure in the shape of a Christmas tree. You can complement the composition with real Christmas toys, cones, ribbons, beads.
Tinsel
With the help of tinsel, it is possible to decorate the wall for the New Year in a variety of ways. It will be great to just hang it up or give it a certain shape, for example, Christmas trees, stars, hearts, a snowman. In general, decorating a wall with bright tinsel for the New Year will transform even the most nondescript or empty wall.
paper decoration
From paper alone, you can create stunningly stylish wall decorations for the New Year. Take at least snowmen, snowflakes, Christmas trees, animals and other symbolic figures cut out of beautiful paper.
And if you use colored paper along with cardboard and glue, you can do a lot of interesting crafts. To decorate the wall for the New Year from paper in an original way, try making a paper garland, a snowman, Christmas tree decorations. This decoration option is good because it practically does not limit your imagination, and also has a low cost.
By the way! Wall decoration for the New Year made of paper is ideal for kindergarten, school! Kindergarteners and elementary school students will be happy to cut out decorative elements themselves.
Very effective for the New Year, you can make a so-called snowflake curtain to decorate the wall. To create it, you need to cut out a lot of snowflakes with paper, fasten them together with a fishing line or thread and hang them on the wall as a curtain.
Photo of wall decorations for the New Year from paper:
Compositions from natural materials
Crafts made from natural materials will never cease to be relevant. They are not only eco-friendly, but also very beautiful! Most often do wreaths of cones, twigs, sticks, dried flowers. For brightness, it does not hurt to add catchy ribbons.
With decorations created using natural materials, you can decorate even a bare wall for the New Year. Such crafts will give the room an indescribable chic and comfort that even the most expensive artificial toys cannot give.
In addition to wreaths, there is an opportunity to make other crafts for the New Year from natural materials. For example, snowman made of cones! This decoration is ideal for a niche in the wall.
Photo of wall decoration for the New Year with wreaths made of natural materials:
Video: how to make a wreath with your own hands and decorate the wall for the New Year.
On a holiday, you can admire not only a decorated Christmas tree, but also an elegant wall. By such a wall, by the way, it will be wonderful to arrange a family, friendly photo shoot for the New Year. Thanks to the photos, you will have warm memories of the holiday.
Photo gallery: original wall decorations for the New Year
