If you have purchased new tv, this may cause many wires to appear. You can hide them in the wall quite simply. There are several options for this. But before that, you need to make sure that a few rules are observed. For example, electric wires must not show insulation damage. In addition, during operation, condensate and moisture should not get on them.
This should include other devices that require the use of large inrush currents during operation. If you are thinking about the question of whether it is from a TV on the wall, then you should remember that you can place the cables in a special channel with low-current lines, among them:
- telephone line;
- the Internet;
- signaling.
It is important to remember that television wiring must be done in one piece. Intersections of the cable and power lines of the power grid must not be allowed. If this cannot be avoided, then it is important to ensure the intersection at a right angle.
When carrying out installation work, you must use factory-made TV signal splitters and splitters, because only they will be able to provide reliable wire contact and shielding of the input signal. Before you hide the wire from the TV on the wall, you must remember that twisted wires should not be used. They are not able to provide good shielding, which will certainly affect the signal quality.
How to avoid mistakes
When laying wires, you must exclude loops, sharp bends and twists into a bay. Soldered wire connections should be used in the switch box, while unshielded sections should have a minimum length, only in this way you will exclude a decrease in the quality of signal reproduction. Splitters and cables should be placed where they can be easily serviced. This includes junction boxes.
If you are faced with the question of how to hide the wire from the TV on the wall, you should know that it can be located along with the power lines. In this case, the diameter of the central wire must be greater than one millimeter. It is better to use material with double shielding or a couple of layers of foil under and over the braid.
Laying the wire in the box
The simplest solution to masking the cable is to use a cable channel or a decorative box. These products are usually made from:
- metal;
- plastic;
- combined materials.
Such a solution has the right to exist for the reason that it complies with fire safety standards, has an aesthetic appearance and is quite easy to install. However, this option for laying the cable has its drawbacks, they are expressed in the high cost of the product and the lack of recommendations from the manufacturer in the kit.
Before choosing a box, you need to determine its size, as well as decide which cables will hide in it. If you are faced with the question of how to hide the wire from the TV on the wall, then you must remember that when laying the wires in the cable channels, there should be free space inside. It may come in handy in the future.
Do not rush to purchase a cable channel, because you need to pay attention to transitions for corners, butt elements, plugs, tees and other fittings. She will be able to give appearance box aesthetic appearance. In addition, the master will not have any difficulties with installation. When choosing the described products, it is important to consider their quality. Experts advise to pay attention to the castle. It must be opened and closed manually; no additional tools are needed for this.
Cable laying in the wall
The most aesthetic and reliable way to hide the cable will be the solution when the wires are laid in the thickness of the wall. For this, voids are prepared between the drywall sheets and the wall itself. This method is the most common, but sometimes it takes a long time to implement, and in some cases, this technology costs a lot of money. If you have installed your TV on the wall, how to hide the wires, you will certainly ask yourself a question.
To hide the cable in concrete wall, you can use the gating method. The process will be quite dusty, but it is suitable only for those who make repairs and lay the cable in parallel. In this case, it is necessary to decide which wires should be hidden, where they should appear from the wall, and also where the sockets will be located.
The gates must be laid strictly horizontally or vertically so that you are sure where the wire passes. After all, sometimes after repair it becomes necessary to hang pieces of furniture or a picture. In this case, it will be important not to get on the wire when drilling holes.
Decorating wires behind drywall sheets
If you have to hang the TV on the wall, how you can hide the wires, you should think before you start. To carry out manipulations on decorating wires in drywall sheets, you should prepare:
- knife for cutting GVL;
- wire;
- rope or strong thread;
- nut;
- electrical tape.
Operating procedure
At the first stage, brackets are installed on the wall to fix the TV. The corners of its location should be marked with electrical tape; in the process of work, this will allow you not to go beyond the zone that will be hidden. Now the master will have to mark where the socket for connecting the device will be located. On the surface of drywall, markings can be made for future holes. The installation area of the socket must be marked to the nearest millimeter, this will allow it to be installed without creating voids.
For laying cables in the wall, cable channels should be made. Another hole is made in the lower part of the wall through which the wire will be hidden in the plinth with a cable channel. The socket can be installed behind the TV, but this is only relevant when it is removed from the surface or mounted on a movable bracket. In this case, easy access to the outlet will be provided.
How to hide the wire from the computer
If you want to make the premises of your home more attractive, you should know how to hide the wires from the TV, computer. In the latter case, the cords can be disguised under the table top. At the same time, they are strengthened with clips mounted on self-tapping screws. If you plan to move the table in the future, you can use Double-sided tape. When you don’t want to spoil the table, you can use a shoe box, after decorating it in an original way to match the interior of the room.
If you wondered how to hide the wires in the apartment, we mask the wire using a special cover that you can make yourself. It is perfect for an extension cord into which all plugs will be inserted. If the cord from the speakers constantly bothers you, then you can hide it in an appropriate cover, which is pre-fixed to the back of the table.
Conclusion
Today, it is quite common to mount a TV on the wall. How to hide the wires in the interior, many owners of apartments and houses are thinking. As one of the most reliable and aesthetic solutions holes will be drilled. You can use an angle grinder for this. It will be necessary to delve into the surface only by 1 cm. Tile glue is applied to the resulting gap, after which the wire is placed in the mixture and masked with tile grout.
If the wall is made of drywall or simply covered with a finish of this material, then you will need to make a rod from a thick aluminum wire. It will serve as a broach, because with its help it will be possible to stretch the cable or wire behind the drywall on the wall. Many are wondering not only where to hide the wires from the TV on the wall, but also where to lay communications on the ceiling. The above method is also suitable for suspension system, which is most often performed just from drywall.
A wall drawing made of wire will become a "highlight" of the interior
A TV hung on the wall looks original, reminiscent of a picture, and saves free space. In any case, this is an interesting design move that allows you to improve the interior. Due to the fact that in modern apartments there are a large number household appliances, the issue of masking wires is relevant and worries many owners. Do not panic, because there are a huge number of options to solve this problem. It is worth relying on your own imagination and choosing a creative approach to solving this problem.
Great idea for lots of wires
As already mentioned, there are several options. Some require only creativity and imagination, while others require certain skills. Consider the main ways to improve this situation.
This is the easiest way. You can just hide the protruding pieces behind the closet, living plants, original curtains and driftwood. In order to mask this wire, it is not necessary to make it invisible. By turning this element into a part of the decor, you can enjoy the atmosphere and the fruit of your own labor. Also for this purpose can be used special boxes applied in various forms, materials and colors.
Using improvised means and some design tricks, you can decorate the TV cable in an original way.
- If the apartment is decorated in the loft style, you can use the channels, which are represented as if by a layout of small bricks.
- If we are talking about a classic space, then such an apartment often involves wood trim, so additional panels will not be superfluous.
- If the room is decorated in high-tech style, television branches can be presented in the form of pipes. They are fixed to the wall with screws or planted on nails.
It's important to know! If you want to get an impressive result, you should not take on such events on your own, especially if you do not have the appropriate skills. If you turn to professionals, they will do all the work efficiently and quickly, and there will be no traces left on the wall.
Variety of decorative boxes
If a person is well developed creative thinking, he will quickly think of ways to mask the cables. In this case, only improvised materials can be used. There are a huge number of options, and you need to choose the method that will be appropriate for a particular decor.
- If the wires are long enough, they can be laid out directly on the wall in the form of a pattern on a specific topic. At the same time, it is necessary to act in the course of their registration according to a certain scheme. First, sketches are applied with a simple pencil, and then you can proceed to the main work.
Decorative elements will help to disguise tv cable
A real work of art can be created thanks to a television cable
In the children's room you can create wall paintings
Hide your cable behind books for a neater look
Perfect disguise in the form of a plant
It's important to know! In the course of work, it is necessary to take into account the fact that it is highly recommended not to violate the integrity of the cord sheath. After all, this can not only contribute to the failure of the device, but also lead to an emergency.
If there is already a repair and you do not want to violate the integrity of the wall, you can do the design of the channel of wires and cables directly on the surface. To make such a box is not difficult. After all, there are a large number of construction markets and other commercial facilities. To do this, it is necessary to paint the resulting ledge in a color that matches the wall. You can also interestingly beat this moment through accessories and at the same time get the best design solution.
TV cable frame
Advice! If the options are more complex, you can drill through the wall. You can also run wires through it or use a channel built inside the wall.
In the first case, actions are appropriate for walls that are not load-bearing. Again, you should not carry out such work on your own, it is better to entrust them to experienced professionals in their field.
If desired, some types of furniture can be folded in the form of a designer. If possible, you can allocate an empty space in the place where the TV should be placed. In this case, all cable branches will be located directly behind the furniture structures.
practical and unusual options wire masking
It's important to know! If you want to avoid problems with wires at all, you should consider installing a TV that works from a centralized station as an option.
Electric wires, laces, cables going from various household appliances to sockets can pretty much spoil the appearance of the room, become an easy “target” for small children, “toothy” pets. When there are a lot of electrical appliances, the question arises: how to hide the wires so that they are not visible or they are minimally noticeable. There are many ways, most of them are easy to translate into reality with your own hands.
The need for masking wires
Why is it necessary to hide electrical wires, why they should not be within reach:
- this is ugly - the interlacing of a bunch of cords in the most prominent places greatly spoils the look of the room, violating the integrity of most interiors, especially "historical" ones. The only exceptions are spaces designed in the style of techno, industrial, loft, art believe;
- it is unsafe - for a cable stretched across the whole room, it is easy to get caught, fall, get injured. Teething children, many pets, are capable of chewing on electrical wires out of curiosity, which often leads to defeat. electric shock varying degrees of severity.
In addition to the cords themselves, it is advisable to hide the “boxes” of extension cords, along with a lot of gadget charges sticking out of them.
Hiding wires in the wall
The most popular option is when the cable is hidden directly into the wall - the so-called " hidden wiring". To do this, appropriate recesses are cut out in it, where electrical wires are placed, recesses are covered. It turns out dusty, long enough, but if the work is done with high quality, dangerous parts are securely hidden - it will not be possible to see, let alone damage them, without violating the integrity of the wall.
In concrete/brick wall
It is desirable to lay electrical wiring at the stage of repair, it is better - the layout of the room. As long as the walls are bare, there is no decor on them, the destruction will be minimal. It is important to know that "pulling" the cable diagonally, which is sometimes done in order to save money, is unacceptable - concealed wiring stack only vertically-horizontally. This will allow you to quickly repair it in the event of an accident, minimizing the risk of electric shock. Minimum distance from ceiling to hidden wires- 15-18 cm.
To begin with, a wiring layout is drawn up, marking is carried out by a construction or laser method. To make strobes, take a puncher, grinder or wall chaser. Details are attached to a brick, concrete wall with dowel-clamps. After the cable is laid, the grooves are primed, covered with plaster, and the wall is leveled.
In plasterboard wall
Installation of electrical wiring under drywall is much easier than in concrete. Here you should also lay the cable along a clear route so that multiple self-tapping screws do not damage it. To begin with, the frame is “assembled” from aluminum profiles, drywall. It is required to lay the cord in a special corrugated pipe, which has a fire safety certificate.
When a plasterboard wall is already in place and it is necessary to lay a cable in it, an electrical layout is drawn up. The cords here are pulled horizontally, vertically, including through holes in the metal profiles supporting drywall.
Floor, ceiling installation
Placing wiring on the ceiling is convenient if the latter is partially or completely made of drywall, stretch films, hollow wooden, plastic false beams. Such coatings perfectly mask all cables, corrugated pipes, and other communications. This is convenient in cases where the floor, walls are almost ready, they have a unique, highly artistic coating - it is problematic to change anything.
Cables are allowed along the floor, if this is done on the ceiling, walls is impossible. Then the screed is made four to seven centimeters thick - under such a layer it is easy to hide any number of electrical wires. Another convenience factor is the placement of sockets and switches as close to the floor as possible (30-90 cm). It will take quite a bit to ditch the wall to install the sockets here, the cable savings will also come out significant.
It is important to choose the most durable, heavy corrugation for each cord, and mount most of the wiring at a distance of 20-30 cm from the wall. Fastening to the floor is carried out using flexible perforated tape, textile material or mesh.
Skirting boards with cable channels
collapsible plastic skirting boards equipped with holes into which a cord is inserted, several wires at the same time. Advantages of skirting boards with cable channels:
- no need to ditch the walls, violating their integrity, wasting time on repairing irregularities;
- the ability to beautifully hide all the wires, almost anywhere in the apartment;
- the element is flexible enough - it can be used even if the wall is crooked;
- skirting board is easy to clean various pollution, does not fade in direct sunlight;
- item is released various colors, is selected under the existing floor covering.
The cable channel is located inside the structure in the center or in the removable upper half. The first option is suitable when you need to hide three or four wires, the second - for several thick cords. It is important to choose a plinth by color, width, mount it from internal corners premises. All corners are closed with special decorative overlays, purchased together with skirting boards.
For timber, concrete, drywall walls appropriate fasteners are used here - the plinth should fit snugly both to the wall and to the floor.
Cable channels, their types for masking wires
Plastic channels, where they put in, stick in the cord, are called cable channels. This is one of the most convenient options for hiding electrical wires, used after finishing finishing works. They are often used in the kitchen - this is convenient when repairs are made, but later acquired additional equipment such as air conditioning, washing machine, lighting fixtures.
Cable channels vary in color, they are easy to replace, supplement with new branches. The design is made of fireproof materials, the cords in it are maximally protected from damage from the outside, ultraviolet radiation. The downside here is that it is problematic to choose colors for some interior styles (baroque, ecological, empire, rustic, etc.), although the design looks much better than wires hanging from everywhere. When the cable channel is located on the corner, any ledge, it is easy to hook it.
The element is made of plastic, metal (galvanized steel, anodized aluminum), it can be U-shaped, W-shaped, triangular, semicircular section. Fastening to the wall, floor, is made with self-tapping screws, dowel-nails, iron brackets, anchors. There are also flexible rubber, wire, transparent options.
Camouflage covers
You can make a cover for one or several cords at the same time with your own hands from plastic bags cut into narrow long strips. A kind of “sleeve” is knitted from them with knitting needles or crocheted, into which all the necessary wiring is inserted. To hide the extension cord with charges in this way, a handbag that fits in size is knitted or sewn.
Some stores offer decorative collapsible plastic cases in the form of tree branches, colored tubes, shiny snakes. This design has no protective properties, like cable channels, but it is permissible to cover “ugly” wires with it. If desired, a special spiral braid is purchased - it is flexible, has an aesthetic appearance, and allows you to hide both one element and many wires.
Decor with stickers, stickers, improvised means
Decorative elements that help hide or neatly fasten numerous cords are sold almost everywhere and are quite inexpensive. In this way, you can decorate the cord coming from the wall lamp above the bed in the bedroom. To decorate the cable from the TV, the cord from the heater running along the floor, it will be possible with the help of a “toy” mini-fence glued to the baseboard. If it is planned to carefully hide many elements behind the fence, tie-ties are used.
Decorative clamps are now sold in all electrical stores. They are an adjustable flexible clip, decorated with leaves, flowers, butterflies, birds, houses. In romantic interiors, laces are decorated with sequins and feathers, in a children's room - with stickers depicting heroes of fairy tales, favorite cartoons.
Wires as an art object
From a long cord, contrasting with the wall near which it is located, it is easy to create an original outline image. When the cords are long enough, which can be arranged intentionally, geometric patterns are laid out of them, whole plot pictures - city panoramas, animal silhouettes, people profiles, trees, furniture legs and backs, mirror framing.
Loft-style interiors are also easy to decorate with wires, laying bricks out of them, decorating them with deliberately huge corrugated pipes covered with bronze paint. The latter also fit in the intended form.
Colored electrical cords can become a continuation wall painting, duplicating the pattern on the curtains, the floor, imitating the "missing" parts of various designs.
Cable as an interior detail, style
Loft is one of the few interior styles in which it is permissible not to hide, but on the contrary, in every possible way emphasize the presence of wires in the most different places. The original retro-style wiring, which not so long ago was found only in really old houses, is now offered by many companies specializing in electrical wiring.
In such an interior it is easy to meet:
- twisted electrical wires "ivory", "copper", "brass";
- convex retro ivory switches;
- sockets "antique";
- cords imitating aged silver.
In the loft, the wires are not hidden at all, but no one canceled the safety here - when there is a risk of accidental damage, it is better to hide the element in massive cable channels stylized as copper, steel, corrugated pipes, wooden boxes, etc.
Ideas on how to hide the cable from the TV, home theater
Cables, cords from TV, set-top boxes, speakers are neatly hidden behind the shelf on which the TV is placed. If it is decided to hang the screen on the wall, the wire is hidden in a box matched to the color of the wallpaper, and placed under it climbing plant, the antennae and twigs of which are allowed to curl around the box.
Many designers offer not to hide the wires, but simply decorate them with colored ribbons to decorate an apartment in pop art style, indoor plants(curly ones are best) - for eco-style, hollow snags-boxes, wood paneling when it comes to classic interiors.
When you have to hang a bracket for a heavy TV, the design of the first one is chosen so as to fit all the sockets there. Sometimes a box is mounted on the wall where the TV screen will be placed, in which the cords from the speakers, DVD player, and other electronics will be hidden.
Tips, ways to hide wires in the workplace
AT home office to make it look neat, the laces coming from the computer, the router also need to be removed. A clerical clip will allow you to “put in” a cord that gets tangled under your feet, under the surface of the table - from its very edge. The clip is easy to fix on a wall, a shelf, and several of these parts make a kind of separators for the inputs of different charges. If possible, the wires hanging around the back of the table are simply curtained with a textile curtain. Some of them can be arranged into a mini-hammock - the “head” of the extension cord can easily be placed there along with chargers that are very disturbing on the table.
With a simple upgrade of the table, which has spacious drawers, all the electrics will neatly hide there.
A modern person often has to charge several devices at the same time. When all of them are inserted into one "tee" or "multi-tail" charging is used, with three to five cords for different devices, all elements are assembled under one stationery clip, attached to any nearby surface. Some purchase options are separator boxes with four to six shaped holes through which only the “tails” of charges are output. Such a product is easy to do with your own hands, by upgrading a simple shoe box, pasted over with a cloth wrapped in colored paper.
Safety - how to hide the wires from the child
Many companies producing household goods produce a whole series of protective elements designed to protect the little man from electric shock as much as possible. Companies such as Ikea produce convenient wire holders - they are difficult to gnaw through, break, and two or four cords can easily fit inside.
Special integrated designs that allow you to charge your phone or tablet are built into any furniture surface - they are easy to place out of reach of the child. The same company produces boxes, bags-cases with buttons - they hide extension boxes, partly electrical wires, which allows you to give a neat appearance to the whole room. For individual devices, there are completely wireless designs - to charge a tablet, phone, player on them, you just need to put the gadget on such a charger.
If it was not possible to purchase protection items for laces, extension cords, all “dangerous” items are hidden in large cardboard, plastic, wooden boxes, which are placed in places inaccessible to the baby.
Conclusion
Wireless technologies are still not widely used - the vast majority electrical appliances must be plugged into an outlet. The way out is to hide the cords in the cable channel, in the wall or under the baseboard. It is also possible to make a real work of art out of a long wire using original decorative elements. Qualitatively disguise electrical cables, cords from all devices to the ceiling, the floor is usually helped by electricians.
Modern housing consists of many communications, where the leading place is occupied by electrical wires. They connect not only numerous light sources, but also all equipment, from household to digital. Such an abundance of cable can create a not very attractive picture, and if there are small children in the house, then it can also be dangerous. So that no troubles happen, during the planning of repairs, you must immediately determine where and how to hide the wires in the apartment. Consider the most common options that are very popular.
Internal placement
When it comes to overhaul, then it is best to hide all communications so that they do not spoil the aesthetic appearance.
Wall
This technology can be applied with wallpaper already pasted on the wall. For this you need to follow simple algorithm actions:
- Wallpaper neatly cut sharp knife and bend to the sides, securing with needles.
- By using construction tool make a groove where the wire will be hidden.
- Lay the cable in the resulting recess.
- Close up the groove with plasticine or cover it with plaster.
- When the solution dries, the wallpaper is smeared with glue and glued in place.
Floor
No less popular is the placement of wires on the floor, or rather under it. So simple yet at the same time original way, you can quickly disguise the wires. You can use this option in several ways.
- Special plinth. When visiting hardware store pay attention to models of skirting boards with a special niche for the cable. In them, the central part will be easily removed, wires can be laid in the recess. This method is convenient and versatile.
- Floor disguise. During the repair work using a perforator, a recess is made in the floor, in which communications are laid and then poured with cement.
- Cement strainer . Leveling the floor is a mandatory process in almost every apartment. When performing it, it is necessary to stretch the wire in the corrugation, lay it on the floor and pour the usual cement screed on top.
Ceiling
You can hide the wires even on the ceiling, besides, it will be easier to do this than in the version with the wall. There are also several options here:
- Installation of a decorative plasterboard niche that runs along the entire perimeter of the ceiling. In the resulting gap, you can place a huge amount of wires. Experts recommend that all communications be fastened into one common highway.
- A stretch ceiling also allows you to hide the wires, but you only need to think about this before the canvas is stretched. The placement method will not matter.
outdoor camouflage
If there is no desire to break and add work to yourself, then you can use at least interesting ways disguise.
Tree branch. Even a small but extra piece of cable can be easily decorated. To do this, a tree branch is formed, which is decorated with homemade leaves, flowers and birds. The original idea will update the interior and enliven the room.
Trees. If the length of the excess wire is too long, then do not rush and cut it off. It will be enough to buy special fasteners, look for a suitable silhouette on the Internet and form it on the wall.
Landscape. More can be considered complex options. So on the wall you can "draw" original panel. The main thing is a clear contrast that will highlight the idea.
Art object. Since we are talking about electricity, we can do original design ceiling in the form of a giant light bulb. This design is fixed on the ceiling.
Power station. To decorative element performed several functions at the same time, you can depict a simple power plant on the wall, with the help of which parents can teach their children the basics and principle of operation of the power plant.
Highway. The process is more complex and painstaking, moreover, it will require free time and desire. To create an interesting piece of furniture, you need to cut out all the components from cardboard and, if desired, color it so that a colorful object comes out. Can be purchased special blanks. Thus, it will be easy to disguise the wires from the TV.
Fence. Any wires can be fixed on top of the plinth. But, in order to disguise them, you can cut out small blanks in the form of a fence, which is fixed to the plinth with double-sided tape. This is an original idea for a children's room, while the fence can be painted in different colors or one specific.
In addition, communications can be easily hidden behind such items:
- tall indoor plants;
- properly arranged furniture;
- door platbands;
- carpet covering.
Note! It is best to draw a wire layout plan on a sheet of paper in order to think over and use several masking options.
A computer
The largest number of cords is located around computer desk. Here, in addition to the computer itself, there may be other devices that require connection to the mains. All this leads to the presence of not only tangled wires, but also carrying. To decorate them, it is enough to turn on the fantasy:
- Using clips, self-tapping screws, double-sided tape, all wires are fixed under the table cover.
- Any shoe box will contain a large number of wires that will come out of specially made holes.
- Stitched cover for extension cord is simply fixed to the cover desk and, thus, it will not get underfoot and interfere with the user.
- A simple cover is also made along the contour of the back of the table, along which the cords will go down to the sockets.
- In order for the wires to be twisted into one whole, you can tighten them into a hose that will quickly remove the chaos behind the wall.
- So that the connectors from the appliances are not lost, you can use simple clerical paper clips that are attached to the side of the table top. When it comes to wires from the Internet, here experts recommend switching to modern and innovative technologies, that is, using a wireless network - Wi-Fi. This will allow everyone to connect to the internet no matter what room they are in.
Note! The shoebox idea can also be used to store chargers for phones, tablets and digital cameras. At the same time, they will all be in their places and will no longer be lost.
- In the process of masking, each type of cable must be marked on both sides. Even after a few years, you will not get confused in in large numbers wires and quickly find the one you need.
- Wires that are used for data or signal transmission (computer, antenna, audio, and internet) must be tied separately from mains AC cables. This will reduce the level of interference and noise.
- The power cable should be short, the longer it is necessary, the greater the risk of electric shock and injury. Even a child or an animal in the process of playing can damage it.
- The fabric braid should not be bent, as the fabric, with a small tear, can catch fire, and also quickly lose its attractiveness.
- The specialist shop offers a wide range of special decorative boxes in which you can hide the wires. original design It will easily fit into any interior of the room and will not take up much space.
Note! buy and cut required amount wires in fact, so as not to subsequently think about where to put the excess and how to decorate them .
If necessary, you can implement the most unusual and extraordinary ideas for masking wires in the apartment.
Quite often, owners of their own homes think about the question of how to hide wires from various equipment. If they “show off” from the outside, then this will not add aesthetics to the interior. You can cope with such work on your own, for this you just need to prepare some tools and show your imagination. Manipulation will not take much time.
Decorating wires from the TV
In some apartments and houses, you can often see a picture when whole strings of cables and wires come from equipment like a TV. However, they can be hidden in the wall, given some rules. Among them should be highlighted:
- electrical wires must not have damage to the insulation;
- it is better to place the wires as far as possible from microwaves, refrigerators, washing machines and irons;
- it is important to prevent moisture and condensate from getting on the cables.
If you also have a question about how to hide the wires, then it is best to place them in a cable channel where low-current lines run like the Internet, alarms and telephone wires. The layout of the apartment must be done in one piece. Intersections are not allowed, and when carrying out installation work factory-made splitters and splitters should be used. There should be no twists of wires, as they will not be able to create good shielding, which will negatively affect the signal quality.
Modern solution: using a box
Before you hide the wires, you should consider several solutions to this issue, among which the use of decorative boxes should be highlighted. They can be made of metal, plastic or a combination of materials. Such a device not only looks quite simple, but also complies with fire regulations.
This solution also has disadvantages, they consist in the high cost of products, the need for skills from the master, as well as the lack of recommendations for installation.
If you still do not know how to hide the wires, then you should not buy the first box or cable channel that suits you in appearance and cost. It is important to pay attention to accessories, namely:
- plugs;
- transitions for corners;
- tees;
- peak elements.
This will not only simplify installation, but also give the appearance of the box an attractive look.
Cable routing in the wall
Quite often, novice home craftsmen wonder how to hide the wires from the TV on the wall. If you lay them in a strobe, then this will become the most invisible and reliable way. As an alternative solution, sometimes drywall sheets but installing them takes time and skill. It is best to use the gating method, however, you can resort to it only if the cable laying is accompanied by a repair.
Using drywall sheets to decorate wires
There are several solutions to consider before this issue. One of them is drywall sheets. For work it will be necessary to prepare:
- wire;
- electrical tape;
- strong rope or thread;
- small nut.
Work procedure
The distance between the screws will depend on the load on the plastic box. When working with drywall or wooden wall where the cable channel will be fixed, self-tapping screws are installed every 50 cm. When uneven walls the fastening step is reduced, which allows you to hide gaps and defects. The floor cable duct must not be fixed too long self-tapping screws. For reliable fixation, 40 mm fasteners will be enough. For screwing it is recommended to use a screwdriver with a Phillips bit.
Decorating wires in the cable channel using dowel-nails
If the cable channel is to be strengthened to a brick or concrete wall, which is quite common for modern houses and apartments, in this case, you can’t do without a cable channel and dowel-nails, which are also called quick installation. To carry out the work you will need a puncher with a 6 mm drill.
To independently fix the cable box on a brick and concrete wall, you must perform a number of the following steps. In the day cable channel drill 6 mm holes, the distance between which will be 50 cm. The box is applied to the wall according to the markings, which will allow you to mark the attachment points that coincide with the holes in the cable channel. Holes must be drilled, only after the box can be installed in its place. Nails are driven in with a hammer.
Using "bugs" to install a cable channel
If it is necessary to install a cable channel in metal surface, the thickness of which is 2 mm or less, metal screws, which are also called bedbugs, should be used for fixing. On sale you can also find a special gun with which the cable channel is installed on concrete.
Original ideas for the home: how to make the wires from the computer invisible
You, too, can try to solve the issue of how to hide the wires from the computer. For this, there are several modern solutions. The first idea is to mask the cords under the table top. For this, clips are used, installed on self-tapping screws or reinforced with double-sided tape.
If you don’t want to spoil the table at all, then you can hide the wires in an ordinary shoe box, but you can decorate it first by making a design that is close to the interior of the room. If you wondered how to hide the wires decoratively, then for this purpose you can purchase a special decorative case in which the extension cord is hidden. It can be attached to the top of a desk.
When the speaker cord interferes, it is usually hidden in a case that is fixed to the back of the table. Extra cords and charging can be removed using ordinary stationery original idea is the conduction of wires through the hose. This quite often helps to solve the question of how to hide the wires under the table in one sheath, which will not spoil the interior so much.
Conclusion
The workplace using one of the above methods can be made more neat and aesthetic. There is nothing complicated about this, the cords can simply be placed in a box or fixed under the table. An added advantage is also the fact that the cords will be reliably protected from children, as well as pets.
