Methodology for non-capital methods of hiding electrical wiring: methodology, analysis, recommendations. How to hide the wires from the TV on the wall - simple solutions against non-standard ideas How to hide electrical wiring in the apartment

Completing renovations in a home or office, as well as carefully disguising existing wires, should not relax owners. Mounting a new TV on the wall, replacing a computer, installing a burglar alarm or additional wiring to power electrical appliances leads to a new connection. All this carries additional risks for children, animals and the appearance of the interior. What are the most effective masking methods? How to hide the wires in the apartment in compliance with the safety rules and preserve the design? Let's consider these points in more detail.

Internal disguise

The best option is to hide the cables even at the stage of overhaul. There are several ways here.

Disguise the wires in the wall. This technology can be used before or after wallpapering. To begin with, the paper is cut with a sharp knife, after which the edges are moved apart and fixed with needles. Next, using a perforator or manually, a strobe is made for masking. After completing this work, a cable is laid in the prepared recess , and the groove is closed with alabaster or plasticine. The final stage involves applying glue to the wallpaper and fixing them in place.

How to hide the wires under the wallpaper is shown here:

Hide the wires in the floor. There are several options here.

Disguise the wires in the floor plinth, where there is a cell for wires. When buying, it is important to pay attention to the design of the product, in the central part of which there should be a special recess. That's where the wires run. This method is characterized by versatility and ease of execution.
Hide the wiring in a strobe. Here the principle is the same as in the case of wall mounting. With the help of a perforator, a recess is made where the excess commutation fits. After that, the strobe is poured with cement and leveled to the level with the floor.
Fill with cement. If the quality of the flooring in the room leaves much to be desired, you can make a new screed by hiding the wires in it. The latter should be in the corrugation.

Remove wiring from the ceiling. Option two:

Hide the wires in a drywall niche installed around the perimeter.
Hide the wires in the gap between the stretch fabric and the main ceiling. In the latter case, it is worth notifying the masters in advance of your decision, otherwise you will have to apply other options.

outdoor camouflage

If the methods discussed above are not available for implementation, do not despair. To beautifully and cleverly hide numerous cords, you can use the opposite method, which involves external disguise. If you approach the issue wisely, numerous wires will in no way spoil the interior, but, on the contrary, will give it exclusivity and an unusual appearance.

Consider how to hide the wires from the outside. The options are:

Simulate a tree branch. A computer or television wire can be easily decorated by creating a small branch with it, decorated with homemade flowers, leaves or birds. Such a solution will transform the interior, give it uniqueness and brightness.
Make a tree. If the wire has a length of one and a half meters or more, you do not need to cut it - it will make a nice "tree". To fix the cord, special fasteners are used, with the help of which the necessary outlines are set.
Power station. Fans of the original design can imitate the supports on which the wires will be attached. This method allows you to solve two problems - to make the wires invisible to the eye and create a base for teaching your children.
Complex drawings. If you have free time and imagination, you can hide the wires on the wall by creating an original landscape. Here the main emphasis is on the contrast between the shade of the wallpaper (paint) and the cable. Separately, it is worth considering the elements that allow you to highlight the wiring.
Fence. One of the best options is to mount the wires at the top of the baseboard. But in order to hide them from the eyes, it is worth making wooden blanks in the form of a fence, and then fix them on double-sided tape. This method is suitable for a corridor or a child's bedroom. For greater originality, each element of the "fence" can be decorated with a different color.
Car track. This option is the most labor-intensive, because it takes time to implement. To create a road, cardboard is used, from which the necessary object is cut out. Next, the paper is painted in a color suitable for the interior.
Other ways. In addition to the options listed above, the wires can be removed under the door frames, behind indoor plants, under the carpet or behind the furniture.

Remember that it is better to develop a wire masking plan in advance, and then strictly adhere to it.

A lot of creative options for masking wires are shown in this video:

Hiding cords from the computer

Despite the popularity and availability of wireless technologies, many devices still need to be connected using wires. One of them is a computer, after installation of which a whole “web” of cords is assembled connecting the system unit with a monitor, a mains supply, a printer and other devices.

How to remove all the cables from under your feet, and at the same time not violate the overall design of the room. There are several options:

Hide the wires and extension cord in a special box. To implement the plan, it is enough to find a box of a suitable size, make several holes in it, and then mask all the switching in it. As an example, the use of a Plug Hub box made of special plastic is allowed. Its peculiarity lies in the absence of a bottom and holes provided in the upper part. Such a "box" can be attached to the floor or to the wall.
Fixing cables under the tabletop. The simplest options include masking the switching under the table, which will require binders and short screws. Make sure that the length of the latter is 20-30 percent shorter than the thickness of the top of the table. First, an extension cord is attached under the tabletop, after which the wires are assembled into a bundle and clamped with binders fixed with screws. There are other options - fastening the power cables with a construction stapler (special clamps are used) or ordinary ties. In the latter case, the wires are pulled together into a common bundle and fixed to the table leg. The part of the connection that comes from the baseboard can be covered with plastic, matched to the color of the flooring. The filter socket should be hidden under the tabletop, fastening it with a wide Velcro (the latter is fastened with screws). To prevent wires from dangling, switching is laid in small cable channels, which are fixed with an insulating tape or a simple plaster.
Creativity. As discussed above, the cable does not have to be hidden somewhere. One of the options is to fix it to the wall with the help of clamps, followed by “fixing” the bird cut out of the magazine. If there are free funds, ugly chargers should be replaced with products in a more original design.

Fixing wires under the table with binders is shown in this video:

and one more option:

Properly hidden wires are a chance to improve interior design, eliminate the risk of electric shock to children and pets, and also get rid of the "web" from under your feet. But, in addition to the secrets already considered, it is worth considering a number of recommendations:

Multiple cords are important to store properly. To do this, all switching from set-top boxes, phones, computers and other equipment is put into a special box. To avoid confusion in the future, the purpose of each cable is signed. Use cable ties to avoid tangled wires.
If the wire is needed regularly, you can fix it around the perimeter of the table from the underside of the table top. With this attachment, the cord is easy to get at any time and connect to the device.
In the process of masking, it is important to mark each cable on one side and the other. Such foresight avoids confusion in the future, when the purpose of each of the switching elements is already forgotten.
Hardware stores offer a wide range of special boxes, made in different styles and able to complete the task. You can easily hide wires in them and not worry about interior design.
When using braided fabric, it is important to ensure that it does not sag. Otherwise, the risk of ignition increases, and the appearance of such a product leaves much to be desired.
The power cable should be as short as possible. In this case, the risks of injury from electric shock are reduced, and the masking process is simplified. If small children live in an apartment (house), it is worth remembering the danger posed by power cords. That is why it is desirable to hide the wires immediately after installing the equipment.
Cables that perform different functions must be separated from each other. So, the wires for powering a computer, printer, music center and other devices are connected separately from the power cords through which voltage is supplied. Thanks to this forethought, it is possible to minimize the pickup, which is the cause of noise and interference.

Results

Tidying up the interior and protecting your loved ones by masking the wires is not difficult, because there are many effective ways to do this. The main thing is to decide on a suitable option, think over the wiring diagram in advance, purchase the necessary materials and follow the advice given in the article.

Even with the fact that wireless technologies are increasingly taking their place in our daily lives, we are not yet able to completely abandon the wires. Despite any Wi-Fi networks, television, telephone and Internet cables are still present in our apartments (not to mention ordinary electrical wires).

Even if all this is connected in one cable, there is no escape from the need to lay it. So, the wires need to be somehow masked. How? Read our article...

INSIDE OR OUTSIDE?

You should start with the fact that there are two main ways to hide the wiring: directly inside the wall or on its outer side.

The first option involves a lot of dusty work: you have to ditch the walls and spoil the existing finishes, postponing dreams of a beautiful interior for a while. But this option will radically solve the problem of interior aesthetics. It is recommended to use this method during the overhaul of an apartment or in a new building.

For those who do not care to hide the wires once and for all, we can offer one of the simplest and most budgetary options - cable channels. Let's outline their main advantages:

the problem of ugly, tangled or hanging wires is completely solved: the cables are hidden, and a decorative element in the form of a cable channel appears on the floor or wall;
ease of installation: the cable channel box is fixed on the wall, the wires are laid inside, and the top is covered with a lid. No inconvenience with a wall chaser, dust, construction debris and damaged finishes;
ease of use: the cover and the body of the cable channel are connected using a latch, which allows you to open and check the cables inside at any time, lay a new one or remove an unnecessary wire;
due to the presence of various connecting elements, it is possible, if necessary, to increase the cable route in length, lead it to the wall, ceiling, or, conversely, lower it to the floor;
low cost makes the cable channel one of the most affordable ways to beautifully hide the wiring.

Few non-specialists in this field know that a cable channel is not just a plastic box with an opening lid. Today in the markets you can find a variety of types of cable channels for various purposes.

Knowing which boxes are used for what, it will be much easier for you to navigate when buying, and the interior will look much neater.

WHY IS IT NECESSARY TO INSTALL CABLE CHANNELS?

Firstly, they make the interior of the room more neat and aesthetically attractive. Agree, entangled between

wires are not the best decoration for your room.

Secondly, it is convenient: it will be much easier to figure out which wire feeds a certain device.

And third, it's safe. If you have small children or pets in your house, it is imperative to hide the wiring in order to

protect them from electric shock. Even a medium-sized cockatoo parrot is able to bite through a 0 10 mm wire with its beak!

TYPES OF CABLE CHANNELS

Today, cable channels are made of aluminum, steel, and also plastic.

PLASTIC CABLE CHANNELS

The most popular are plastic cable channels, as they have good characteristics. Cable channels themselves are usually made of PVC.

The main feature of a high-quality material is that, under mechanical action, the channel changes its shape and also easily restores it without significant changes.

Accessories for cable channels are made of ABS plastic with additional additives that prevent the spread of combustion and the release of harmful fumes when heated (the composition is similar to the material of plastic parts of sockets and switches). Such material is easy to recognize: its structure is uniform, there is no foliation, the product is strong enough.

Plastic models have different colors. Very popular models with a pattern under the tree.

METAL CABLE CHANNELS

Metal models (aluminum and steel) are characterized by excellent fire performance. High-quality galvanized steel has a special coating that prevents corrosion. Metal cable channels have a long service life and are much more durable than plastic models - they can even withstand hammer blows.

The price of such products starts from 2200 rubles. per running metre.

SKIRTING CABLE CHANNELS

Often, a cable channel is not an interior decoration, but the need to hide the wires so that they are as invisible as possible. Plinth cable channels perfectly cope with this task.

These are a kind of plastic skirting boards, in the central part of which there is an internal cavity where the wires are laid. There are whole systems of skirting cable channels: not only long trays, but also a number of additional devices that allow you to assemble a structure of any configuration.

These can be external and internal corners, bends of various shapes, plugs, mounting boxes on which switches and sockets can be installed. There is also an option to install sockets directly at the level of the plinth. This is convenient in the kitchen, when sockets are brought out for built-in large household appliances (refrigerator, dishwasher, electric stove) - so they do not interfere, they are even practically invisible.

The disadvantage of such a system is that the plinth cable channel accommodates a small amount of wires. Most often, a television cable is hidden in it. To bring the connectors in the right places, there is a special fitting that allows you to do this neatly and as discreetly as possible.

Common sizes of plinth cable channels: 15 x 100; 20 x 50; 20 x 70; 25 x 100 mm. Also on sale are cable channels of both large sizes (35 x 80; 35 x 105; 50 x 80; 50 x 105; 50 x 150; 65 x 150 mm) and mini-series (20 x 12.5, 32 x 12.5; 40x12.5; 32x16:^0x16; 60x60; 60x20; 75x20 mm).

The price of such a product depends on the manufacturer, the most budget models can be purchased at a price of 385 rubles. per linear meter, the price of accessories starts from 30 rubles. a piece.

FLOOR CABLE CHANNELS

It happens that you need to pull the wires to the center of the room along the floor.

You can, of course, throw an extension cord. But in this case, wires will appear again, which are easy to touch and catch, and it is undesirable to carry a computer chair along the wire - you have to lift it every time.

This is where cable ducts come in handy. They are used for reliable laying of cables on the floor, as they can withstand heavy loads. And besides, the relatively small height of the structure allows you to move freely around the room without fear of stumbling, and even a computer chair on wheels can easily overcome this obstacle.

This type of cable duct differs both in shape and installation method. They are mounted on the floor, so they have a rounded shape on one side, so they do not interfere with movement. Available in impact resistant plastic or aluminium. There are also accessories for them - joints, corners and plugs. The most common sizes: 50 x 12; 75×17; 92×20; 160×65 mm.

The price of outdoor cable channels is not much different from the plinth ones - they are sold at a price of 370 rubles. per running metre.

FOR WALLS PARAPET CABLE CHANNELS

Cable channels of this type are similar in structure to skirting boards. The main difference is. that they are mounted above floor level. Installation of parapet cable channels is usually carried out at the level of window sills or at the level of the workplace. In the case of parapet cable channels, it is possible to install switches, various sockets (for a 220 V electrical network, television, Internet, etc.). They also consist of various elements that allow you to assemble any configuration.

Parapet cable ducts have various finishes that allow you to either make the channel invisible (then the elements are matched to the color of the walls), or, conversely, highlight and make an accent in the interior.

The price for parapet cable channels is almost twice as high as for outdoor ones and averages 600 rubles. per running metre.

PERFORATED CABLE CHANNELS

This is a kind of electrical boxes, the distinguishing feature of which is perforation (comb-shaped profile) on the sides. They are, as a rule, a U-shaped profile 2 m long and have a different cross section. If necessary, they are completed with a lid with continuous or partial perforation. As in other models of cable channels, the cover snaps into place after laying the cables. This profile design is used to lighten the weight and installation of cable routes. Perforated cable channels are often used when the appearance of this installation is not so important (for example, in closets, basements, utility rooms).

Prices for such cable channels are among the most budgetary - an average of 200 rubles. per running metre.

FLEXIBLE CABLE CHANNELS

In situations where a "flexible approach" is important - if the walls, floor or ceiling have a relief or height differences - we need such cable channels that can freely repeat this shape. In this case, flexible cable channels are used. There are cable channels of open and closed types. Open are convenient in service and installation. Closed completely prevent the ingress of foreign objects. TYPES OF FLEXIBLE CABLE CHANNELS:

flexible chains (or tracks)- multi-section structures that can be bent along the entire length in one plane (up and down). Each element of the "chain" is connected to adjacent links by a hinged hitch and has a snap-on cover. There are small gaps between the links, so the cable channels are called semi-closed.

Most often they are used in production to connect machine tools. However, this does not mean that the owner of a private house cannot use such a cable channel. If he has his own home workshop or garage, this view will be very useful to him. Width of flexible chains - from 20 to 234 mm;

tubular: flexible cable channel to go to the door. Such a cable channel consists of a flexible metal hose and two fasteners that are attached to the wall and door. Typically, such transitions are used to power electric locks. Please note that the tubular cable channel can be bent countless times, but only on the condition that there are flexible wires inside (made of thin wire)
molded from soft plastic or rubber. Cable channels, molded from rubber or soft plastic, have sufficiently thick walls that can prevent moisture from entering inside. In a private house, cast cable channels are successfully used for wiring in a bathhouse (with the exception of a steam room).

Flexible cable channels will cost more - prices start at 1000 rubles. per running metre.

MINI CABLE CHANNELS

By and large, mini-cable channels are standard U-shaped channels with a cover, but with a much smaller cross section. Another difference from conventional cable channels is the absence of accessories (plugs, joints, corners, etc.). They are used where it is not necessary to hide a large number of wires: for example, when summing up ceiling lighting in a country house. Mini-cable channels can be of the following sizes: 10 x 10; 12 x 12; 16 x 14; 20×20; 25×25; 40×40 mm.

The price of mini-cable channels varies from 60 to 150 rubles. per running metre.

FOR CORNERS

Corner cable channels, due to their design, can be installed at the junction of the wall of the room and the ceiling, and less often - instead of a plinth.

Angled cable channels are cut with a hacksaw at the desired angle. Do this carefully so that the corners converge evenly with each other, as they can also serve as a decorative element - molding. No one will guess that the wires are hidden under it! However, such a cable channel also has a drawback - it does not have as much space as in a baseboard.

The most common dimensions are 40 x 40 mm, so you can’t fit many cables into it, and we don’t even talk about wiring. Also, skirting cable channels have thinner walls and there is a high probability of damage when laying at the bottom. Here you need to be careful not to damage the wires that you will lay.

The price of such cable channels varies from 60 to 150 rubles. per running metre.

IS IT WORTH HIDING THE WIRES IN THE WALL?

If the style of the interior and your means allow, you can go in an extremely contradictory way: do not hide the wiring, but, on the contrary, put it on display. How?

RETROWIRE

First, of course, we will talk about retro wiring.

Some time ago, this is exactly how the wiring was done: insulators were nailed to the wall, and twisted wires were attached to them. Then came the fashion for hidden wiring: everyone tried to hide the wires as much as possible, leaving only the frames of sockets and switches outside, but they also tried to make them as less noticeable as possible. Recently, however, designers have realized that everything new is a well-forgotten old, so retro-style open wiring is gaining popularity again.

It fits perfectly into the loft style, English, classic styles of interiors, and also looks great in wooden houses made of logs, where a plastic cable channel would look just ridiculous.

If everything is clear with the first reason (aesthetic), then the second reason why cable channels are not installed in log houses is that a wooden house changes its size all the time. Even after the main shrinkage has passed, there are changes and they are seasonal in nature: during wet periods, the wall becomes higher, during dry periods it settles. The difference in height can be up to 5 cm per floor! And since the cable channels do not change their size, there is a problem of their damage.

Retrowiring and all accessories for it are not cheap: the twisted wire itself - from 165 rubles. per linear meter, sockets - from 1200 apiece, switches - from 1500 apiece.

CREATIVE WIRING

If you are a young and active person or just keep up with modern trends, you will love our ideas.

Organize whole pictures from wires! To do this, you will need a sketch or photograph of the future picture, a construction pencil, a couple of packs of brackets for attaching the cable, and the wire itself, the length of which depends on the size and complexity of the future drawing. The linear picture itself is outlined with a pencil, as well as the places where the cable begins (for example, a socket) and its end (a lamp).

But if there is not enough wire for the picture, but you still want to decorate it, cut out the silhouettes of birds from thick black cardboard and “plant” them on the wires - it will be original. Or

choose a cable in a bright, contrasting color and create abstract shapes from it on the wall. For the most creative, one more option: organize a whole installation on the wall - a tree from floor to ceiling.

Reading 3 min. Published on 01/10/2017

When the option of buying a new baseboard is not considered - do not despair - just cut the old one! Yes, yes - cut the bottom of the old baseboard! Of course you ask - why do I need this? So, now there are special pads for the plinth on sale - they will help you. You simply cut off the bottom of your baseboard, then put the cables that interfere with you into the freed space, and cover the whole thing with an overlay. Voila! Wires are not visible. It remains only to paint the lining in the color of the baseboard, or, which is more convenient, paint them together with the baseboard! Thus, all the wires will be hidden, and even the plinth will be fresher and more beautiful.

2. Lay wiring under the ceiling. This option is only suitable if you need to hide the wires in the room where the false ceiling is installed. Unfortunately, not everyone has a room high enough to be able to afford to further lower the ceiling by installing a suspended one, however, this option cannot be discarded.

3. Route all wiring in cable ducts. This is a universal option, because cable channels, or, as they are also called, boxes, look quite aesthetically pleasing and neat, and at the same time very functional. In one 2 cm wide box, you can lay 4-6 power cables for a TV or computer, and this is enough to hide all the main wiring in the room.

To install the box, you need smooth and even walls, but in apartments they are almost everywhere like that, so the cable channel will lie flat and without indents .. In addition, it can be pasted over with wallpaper to disguise it, and then with the naked eye it will generally be difficult to determine.

The issues of hidden wiring are of concern to many citizens, especially if they have the Internet. Not everyone wants to sit at the table and move the mouse in front of the computer - many people want to surf the Internet lying on the couch from a laptop or tablet. However, most modern Internet equipment, such as cisco ws-c3750x-24t-s, works only by wire. Although, as an option, everyone can connect their router with a Wi-Fi antenna to such a switch and use the Internet throughout their apartment. Think about it, wireless is the future.

We welcome everyone who looked to us on the Internet light. Our portal is connected with electrical issues, but we do not forget to periodically talk about things indirectly related to it, which, however, are no less important in our everyday life.

The choice of today's topic fell on the TV on the bracket, namely, how to hide the wires from the TV on the wall. At first glance, it may seem that the question is not so complicated, but even the most ardent skeptics, after reading the material, will discover something interesting and new. So let's go!

We will start with the most obvious and will gradually move towards more interesting and original solutions.

Straight into the wall

Today, concealed wiring is more popular than ever, and indeed, people try to hide from their eyes any communications that, in their opinion, spoil the appearance of the interior. An exception was not made for the antenna wire for the TV, which very often has to be pulled through the entire apartment or house, since a high-quality video signal can often be obtained only by installing the receiver only in a certain place.

Floor plinths with cable channels, which can hide most of the cable along its length, are very helpful in solving this problem. However, if the TV is hanging on the wall, the wire has to be taken out of the plinth and directed to it, and it is not difficult to guess that the whole picture immediately deteriorates.
Plus, do not forget that the antenna television wire is not the only cable that fits the TV. At a minimum, you will need to power the equipment from the electrical network, but, as a maximum, it will also include: LAN Internet cable (many modern TVs are already, in fact, a computer that can access the network); wires for transmitting video and audio signals from various DVD players, TV receivers, HI-FI acoustics and more.
The picture begins to emerge and is completely horrific, and sometimes the maximum that can be done is to wind everything up in a bunch of nylon ties, and at least somehow try to disguise all this disgrace.

Perhaps the most time-consuming and dirty way to hide such a number of wires will be laying them in the strobes made in the wall during the repair. However, the method can be safely called the most accurate and technologically advanced, since the wires hidden in this way will not be gnawed by your cat, no one will accidentally hook your foot, plus everything will be displayed in a single console containing all the necessary outputs.

In this case, there is no need to hollow out the entire wall in order to spread all the wires around the room. It is enough to stretch them to the same plinth and hide everything else in it.

The big disadvantage of this approach is that it is applicable only in premises where renovation work is being carried out. If your walls are just done and you don't want to touch them anytime soon, then scroll right through to the next chapter for alternative methods for hiding your TV antenna wire.

If you are ready to take drastic measures, then stock up on tools and go ahead:

First of all, you need to accurately outline the location of the TV on the wall.
Next, determine which bracket you will use for mounting. This point is very important, because, despite the VESA world standard, which includes the most common attachment points, the brackets themselves can be of different shapes and sizes.

Advice! Without paying attention to this, you can end up with communications peeking out from behind the “carcass” of the TV, since the bracket is too massive, or it will interfere with switching.

It is desirable that the device is already in your hands, so that everything is measured clearly.
Try on the bracket to the TV and measure the distance that remains to the edges - it is on it that we will place all the sockets.
We transfer the measurements to the wall and begin to dust. The grinder cuts two vertical strips a couple of centimeters deep, at a distance of 2-3 centimeters from each other.
Next, the inner part is hollowed out with a puncher to form a full-fledged strobe.

After, with the help of diamond crowns, a series of holes is made for the purchased TV outlet. Immediately see that this element contains all the necessary outlets and a sufficient number of power points so that it is enough to connect all the equipment.
The next steps are extremely simple. First, all the wires are laid in the strobes, which must first be fixed with plastic brackets so that they do not fall out and do not interfere with further plastering.
The ends of the wires are connected according to the scheme with the socket, and it is installed in its place.
All strobes are sealed with gypsum plaster, after which subsequent finishing is performed.

cable channel

A less elegant solution would be to use a cable channel, but not everything is so simple - you can make this element yourself or find a non-standard store option, making it an integral part of the interior. Plus, do not forget that it will be much easier and faster to implement such an undertaking.

Having studied the assortment of electrical goods stores and those selling electronics, you can find the following types of cable channels:

The easiest option is PVC.. Everyone saw them - this is an ordinary plastic box in white or another color, which has a removable lid held on by latches. It is possible to successfully fit such a product into the interior only if it is combined with the environment in terms of color - it will merge with it or, on the contrary, will be brightly contrasting.

Quite a rarity - models from MDF that can be effectively combined with the environment.
Metal options- more often it is aluminum, which is shown in one of the photos above. Such a product looks impressive enough to become part of some futuristic interior.

The structure of all models is very similar. They are attached directly to the wall with dowel screws, after which all connections, together with wires, are hidden under a decorative overlay.

As already mentioned, in some cases it is advisable to make a box with your own hands. The quality of workmanship and the final appearance will depend entirely on your ability to handle the tool, as well as the type of materials used in the decoration of the room.

The photo above shows a very simple and at the same time effective way to assemble such a box. It is made of planed boards, between which all the wires are laid. Any decorative overlay can be placed on top of them, and the boards themselves can be painted in any shade to make them as inconspicuous as possible.

Special furniture

Furniture manufacturers also did not bypass the problem and offered their solutions to the buyer.

As you can see, the variety is very large, and there are enough non-standard furniture options. In part, they are not able to hide all communications and still require gating, however, with this approach, there will be much less dirt, so you can resort to this method even in a renovated room, doing everything as carefully as possible.

Creative approach to problem solving

Well, for dessert, we offer you several options that can not only be effective, but also allow you to additionally decorate the room.

decoration

A very interesting way out of the situation is not to hide the wires from the TV on the wall, but to decorate them, that is, to make them part of the interior.

Here are some interesting examples:

There are a lot of decoration options, and even manufacturers offer their own solutions. And if you have enough experience and imagination to create and implement your ideas, you can create a real masterpiece for mere pennies.

The simplest ways of artistic decoration will be the following options:

Parts of the wires can be placed behind the furniture, attached to it from the back with tape or staples;
Install living plants under the TV;
Use varnished driftwood;
Make a necklace out of wire by putting large beads on it;
Apply ready-made plastic clamps from the manufacturer;
And much more.

Decorative boxes

If the wires themselves do not bother you much, but the massive tees and extension cords “calm” your eyes, then the original solution to the issue will be to place them inside a decorative box that you can make yourself or purchase a ready-made version. By the way, instructions for assembling one of these solutions will be given in the video attached to the article.

Various devices are also very effective, allowing you to hide and secure the largest parts in inconspicuous places.

Here are some photos with similar solutions:

That, in principle, is all that we wanted to tell you about how you can hide or disguise the antenna wire for the TV and other cables. No need to put up with the given! Approach the matter wisely, and the result will not keep you waiting!

Modern housing consists of many communications, where the leading place is occupied by electrical wires. They connect not only numerous light sources, but also all equipment, from household to digital. Such an abundance of cable can create a not very attractive picture, and if there are small children in the house, then it can also be dangerous. So that no troubles happen, during the planning of repairs, you must immediately determine where and how to hide the wires in the apartment. Consider the most common options that are very popular.

Internal placement

When it comes to major repairs, it is best to hide all communications so that they do not spoil the aesthetic appearance.

Wall

This technology can be applied with wallpaper already pasted on the wall. To do this, you need to follow a simple algorithm of actions:

The wallpaper is carefully cut with a sharp knife and bent to the sides, securing with needles.
Using a construction tool, make a groove where the wire will be hidden.
Lay the cable in the resulting recess.
Close up the groove with plasticine or cover it with plaster.
When the solution dries, the wallpaper is smeared with glue and glued in place.

Floor

No less popular is the placement of wires on the floor, or rather under it. In such a simple, but at the same time original way, you can quickly disguise the wires. You can use this option in several ways.

Special plinth. When visiting a hardware store, pay attention to models of skirting boards with a special niche for the cable. In them, the central part will be easily removed, wires can be laid in the recess. This method is convenient and versatile.
Floor disguise. During the repair work, using a perforator, a recess is made in the floor, in which communications are laid and then poured with cement.
Cement strainer . Leveling the floor is a mandatory process in almost every apartment. When performing it, it is necessary to stretch the wire in the corrugation, lay it on the floor and pour the usual cement screed on top.

Ceiling

You can hide the wires even on the ceiling, besides, it will be easier to do this than in the version with the wall. There are also several options here:

Installation of a decorative plasterboard niche that runs along the entire perimeter of the ceiling. In the resulting gap, you can place a huge amount of wires. Experts recommend that all communications be fastened into one common highway.
A stretch ceiling also allows you to hide the wires, but you only need to think about this before the canvas is stretched. The placement method will not matter.

outdoor camouflage

If there is no desire to break and add work to yourself, then you can use no less interesting methods of disguise.

Tree branch. Even a small but extra piece of cable can be easily decorated. To do this, a tree branch is formed, which is decorated with homemade leaves, flowers and birds. The original idea will update the interior and enliven the room.

Trees. If the length of the excess wire is too long, then do not rush and cut it off. It will be enough to buy special fasteners, look for a suitable silhouette on the Internet and form it on the wall.

Landscape. You can consider more complex options. So on the wall you can "draw" the original panel. The main thing is a clear contrast that will highlight the idea.

Art object. Since we are talking about electricity, you can make the original design of the ceiling in the form of a giant light bulb. This design is fixed on the ceiling.

Power station. In order for the decorative element to perform several functions at the same time, you can depict a simple power plant on the wall, with which parents can teach their children the basics and principle of operation of the power plant.

Highway. The process is more complex and painstaking, moreover, it will require free time and desire. To create an interesting piece of furniture, you need to cut out all the components from cardboard and, if desired, color it so that a colorful object comes out. You can purchase special blanks. Thus, it will be easy to disguise the wires from the TV.

Fence. Any wires can be fixed on top of the plinth. But, in order to disguise them, you can cut out small blanks in the form of a fence, which is fixed to the plinth with double-sided tape. This is an original idea for a children's room, while the fence can be painted in different colors or one particular one.

In addition, communications can be easily hidden behind such items:

tall indoor plants;
properly arranged furniture;
door platbands;
carpet covering.

Note! It is best to draw a wire layout plan on a sheet of paper in order to think over and use several masking options.

A computer

The largest number of cords is located around the computer desk. Here, in addition to the computer itself, there may be other devices that require connection to the mains. All this leads to the presence of not only tangled wires, but also carrying. To decorate them, it is enough to turn on the fantasy:

Using clips, self-tapping screws, double-sided tape, all wires are fixed under the table cover.
Any shoe box will contain a large number of wires that will come out of specially made holes.
The sewn cover for the extension cable is simply fixed to the desk cover and thus will not get in the way and interfere with the user.
A simple cover is also made along the contour of the back of the table, along which the cords will go down to the sockets.
In order for the wires to be twisted into one whole, you can tighten them into a hose that will quickly remove the chaos behind the wall.
So that the connectors from the appliances are not lost, you can use simple clerical paper clips that are attached to the side of the table top. When it comes to wires from the Internet, here experts recommend switching to modern and innovative technologies, that is, using a wireless network - Wi-Fi. This will allow everyone to connect to the internet no matter what room they are in.

Note! The shoe box idea can also be used to store chargers for phones, tablets and digital cameras. At the same time, they will all be in their places and will no longer be lost.

In the process of masking, each type of cable must be marked on both sides. Even after a few years, you will not get confused in a large number of wires and quickly find the one you need.
Wires that are used for data or signal transmission (computer, antenna, audio, and internet) must be tied separately from mains AC cables. This will reduce the level of interference and noise.
The power cable should be short, the longer it is necessary, the greater the risk of electric shock and injury. Even a child or an animal in the process of playing can damage it.
The fabric braid should not be bent, as the fabric, with a small tear, can catch fire, and also quickly lose its attractiveness.
A specialist shop has a large assortment of special decorative boxes in which wires can be hidden. The original design will easily fit into any interior of the room and will not take up much space.

Note! Buy and cut off the required amount of wire after the fact, so that later you don’t have to think about where to put the excess and how to decorate it .

If necessary, you can implement the most unusual and extraordinary ideas for masking wires in an apartment.