Greetings, dear readers!

Here I love the silence and tranquility of suburban villages. There you can relax from the hustle and bustle of the city.

At least once a week I spend the weekend at a friend's dacha. But with the onset warm weather various flying insects became active.

They strove to penetrate through the windows into the house and interfere with restful sleep.

We fixed this problem quickly. Now I will tell you how you can make a mosquito net with your own hands on a plastic window.

Now you will be able to solve such questions on your own. By the way, you can order a window from us and get mosquito net and 5 more gifts TOTALLY FREE! Our prices will pleasantly surprise you:

• : manufacturing, installation
• Surface preparation
• Tape laying
• Markup and installation
• Frame manufacturing
• Attaching the canvas to the frame
• Do-it-yourself mosquito net for plastic windows
• Kinds mosquito net
• Installation frame mesh

How to make a homemade mosquito net: 3 ways to make

Which is better - a purchased mesh or a self-made one? A few simple ways to make a mosquito net with your own hands:

• Frame window grids
• Roll mosquito net
• Protective nets
• Canvas selection
• Restoration of mosquito nets

The easiest is to make your own mosquito net from insects using the appropriate fine mesh material and adhesive tape for fastening.

Such a product will provide protection for the premises for several seasons.

You will need the following components, which can be purchased at retail:

mosquito net with 1.2 mm cells;
adhesive tape - one side of it should contain a pile, and on the other there should be many small hooks;
glue for gluing cork or mosaic.

Surface preparation

Mosquito net for plastic windows should be installed on a clean, prepared surface. The space is prepared by clearing open windows from dirt and degreasing their inner surface. To do this, you can use a soapy sponge, after wiping with clean gauze.

Given that the installation is carried out on plastic windows, be sure to use only soapy water for cleaning, and in no case resort to solvents or alcohols.

Tape laying

After cleaning the surface, peel off the adhesive tape. Select the part with the hooks and glue it to the perimeter of the window opening with glue applied to the back. Pay attention to the fact that the tape does not interfere with the closing of the window. It is very important that it does not create difficulties in the joint area between the base of the window and the side where it closes.

The tape can be glued more easily if you do the opposite, apply glue around the entire perimeter of the desired area, and then, without making extra measurements, cut the tape to the required length and width.

Markup and installation

Leave the tape for a while to dry, and start marking the mosquito net. Having measured the perimeter of the opening, and apply its contour to the canvas. When cutting, leave a margin that will be equal to the width.

You need to bend the overlap around the perimeter, and then sew the second part of the tape, and with the pile out. Sew along the edge, if necessary, you can make additional stitches in the middle.

After the tape with hooks is glued to the frame, wait about three hours. Then attach a mesh with a fleecy tape to it. Now you know that it is not so difficult to make this design with your own hands.

Installation of a mosquito net on a frame

Of course, the next option is not the cheapest. However, costs can be minimized if installation on plastic windows is carried out independently.

Materials. You need to purchase:

corners made of metal, the width of which is about 1 cm, a plastic cable channel measuring 15x10 mm, glue,
about sixteen blind rivets,
the canvas is just the right size.

Frame manufacturing

Since this kind of product is installed outside the window, when taking your measurements, focus on this side of the window. After the necessary data has been received, you can begin to manufacture the future frame: mark your data on the cable and cut the required length at forty-five degrees with a saw cut or a knife.

The places where the cut was made, sand with a special whetstone. Compare the finished polished components of the future frame, connect metal corners. While holding them, make holes for the rivet in the finished cable channel, taking into account the holes in the metal corners.

Please note! Insert rivets into the holes obtained. It is important that the riveter is on the outside of your cable, not inside. If you don't have a riveter, you can use screws and nuts.

After tightening the screws, be sure to cover the nut with oil paint to prevent the nut from screwing during vibration.

Attaching the canvas to the frame

Having completed the frame, proceed to attaching your mosquito net to it. It is better to use a thin mesh to avoid the difficulty of pinching it in the cable. Lay it on top of the frame so that the edges protrude 2-3 cm beyond the perimeter of the frame, and snap the mesh with the cable channel cover, alternating snapping the short and long sides.

Be careful before you fasten the long side.

Be sure to pull it up a little towards the corner to eliminate sagging - but don't pull it too hard, as this can tear the protective sheet. After you finish installing it on the frame, you can trim off any unnecessary sticking out excess.

In some locations, apply adhesive between the cable and the cover to prevent spontaneous opening of the cover.

How to install ready-made in a window opening

From a sheet of metal, cut two strips of 20-30 and 20x40 mm, bending them into a Z shape. Try to make the bend wrap around the channel. Choose a shorter side where you drill a hole intended for a self-tapping screw.

Ready-made fasteners are installed on the street side of the window, retreating about a centimeter from the window opening.

Fasteners are installed using a self-tapping screw, with long fasteners placed at the top, and short ones at the bottom. The distance between the lower and upper fasteners must exceed the length of the frame by 1 cm. Start the installation with the upper fasteners and end with the lower ones.

Do-it-yourself mosquito net for plastic windows

With the onset of the first sunny days, the issue of protecting your home from flies, mosquitoes, midges and other flying insects becomes relevant.

Helpful Hint! Owners wooden windows Traditionally, gauze or mesh is attached to the frame with buttons. And in other cases, the assembled mosquito net on plastic windows with your own hands can become a salvation.

Frame or roll mosquito netting is easy to install and remove, does not require special care and strict rules during operation.

Types of mosquito net

You can independently make a design of two types:

Velcro;
frame mosquito net.

The first option is simpler and more budgetary. Any woman can make and install such a grid, even without special tools.

This is important! Frame grids are more practical, they will last for several years, do not deform and retain their basic properties.

To make a mesh with Velcro, you will need: a canvas with a mesh size of 1x1 mm; Velcro tape, on one side of which there is a pile, and on the other, small flexible hooks-grabs; cork glue or mosaic tiles.

A strip of tape with hooks is attached with glue around the perimeter of the window frame. After that, the required mesh segment is measured and cut out. The remaining strip of tape with a fluffy pile is attached along the edge. It is recommended to attach it to the frame 24 hours after the glue has completely dried.

Making a frame grid with your own hands

The frame structure consists of the following elements:

net;
painted aluminum profile;
fasteners for the frame;
crossbar;
fasteners for the crossbar;
plastic fasteners for corners;
rubber cord seal;
handles-holders for installing the frame in the window opening.

At the very beginning, we will tell you how to measure a mosquito net on a plastic window. Measurements must be taken with the window sash open. Height and width must match the light opening. 4.5 cm of the window frame at the top and 4 cm at the bottom must remain free, they will be equipped with fasteners for the frame.

Subsequently, when making a frame, it is important to take into account the width of the aluminum profile. His standard sizes- 25 mm.

The assembly begins with the preparation of the aluminum profile. Points corresponding to measurements are applied to it with a pencil, vertical and horizontal planks of the frame are cut out on them. They connect with each other plastic corners, forming a framework.

The crossbeam should be 50mm less than the width of the net in order to be easily inserted between the side vertical slats. The main purpose of this element is the tension of the mesh.

In the center of the frame, the mesh can shrink due to tension, and the bar will prevent this.

At first glance, it may seem that a do-it-yourself mosquito net for plastic windows is a complex design and can only be dealt with experienced master having in his arsenal special tools.

This is important! In fact, when measuring and assembling, you can use improvised tools: a school ruler, a kitchen or stationery knife, scissors, and a screwdriver and a hammer can be found in every home.

After the frame frame is assembled, you can begin to tension the mesh. To do this, the frame must be turned upside down and laid on a stable horizontal plane. A piece of mesh is laid over the frame so that the protruding parts along the perimeter are equal.

Using a screwdriver or other flat thin object, a cord is tucked into the groove of the profile. It is placed on top of the mesh and holds it firmly inside the aluminum frame. In the process of work, it is important to stretch the canvas and straighten the formed folds.

Approximately in the center of the vertical slats, handles are installed for convenient installation of a mosquito net. They also roll up under the rubber cord. The remaining web of mesh around the entire perimeter of the frame is cut with a blade or a clerical knife, giving the product a finished, neat and aesthetically beautiful appearance.

Installing the frame grid

Before installation, the profile of the window frame should be prepared. Its surface is cleaned of dust and wiped dry with a soft, lint-free cloth.

For installation, special fasteners are used, which are screwed to the frame with self-tapping screws. Two fasteners are placed on the lower horizontal bar of the window profile, they are slightly smaller in size than the upper fasteners.

For more convenient screwing, you can glue them to the frame with double-sided tape. After the screws are screwed in, it is recommended to treat all seams with silicone sealant in order to maintain the waterproof and heat-conducting properties of the plastic profile.

Do not miss! Electrochromic glasses - what is it and why are you needed

The upper fasteners are installed according to the same principle. To calculate their location, it is necessary to install the frame with the grid all the way to the bottom brackets, mark the height at the level of the top bar, then add 8 mm to this figure.

Please note! When installing the mesh in the fasteners, you should hold the frame by the handles. First, the mosquito net is inserted all the way into the top brackets, and the bottom bar should pass freely over the bottom fasteners.

The frame is close to window profile, then slowly lowers. If the top fasteners are not stable enough to hold the frame, it is recommended to reinstall them a few millimeters lower.

It is necessary to remove the mosquito net (for example, to clean it from dust and debris) as follows: holding the handles, the frame rises up, is removed from the lower fasteners, then falls down and exits the upper fasteners.

How to make a homemade mosquito net: 3 ways to make

Summer brings not only positive emotions and rest, because you should not forget about annoying flies and dangerous mosquitoes, who strive to fly into the open window.

A mosquito net is inexpensive, but if you count that there are several windows in the house, then in the end you get quite a decent amount, which, if desired, can be saved. Do-it-yourself mosquito net is done quickly and will be inexpensive.

Which is better - a purchased mesh or made by yourself?

Buying a window mesh will cost you about 1500-2000 rubles, so for the sake of savings, you can make it yourself. Many people ask the question - how to make a mosquito net on a window? It is not difficult, especially since everything you need can be bought at a hardware store.

If you are interested in the question of what mosquito nets are made of, then the answer is simple - the material is durable fiberglass with the addition of weatherproof PVC. The higher the quality of the material, the higher the protection against insects.

Before you make a mosquito net with your own hands, take careful measurements, do not forget about allowances. If you are going to attach the mesh with Velcro or glue, choose something that can be easily removed without damaging the window.

A few simple ways to make a mosquito net with your own hands

There are two types of mosquito nets that you can make yourself:

Framework.
Roll.

Mosquito net fixed with adhesive tape

One of the easiest ways to make a mosquito net with your own hands is with the help of special material and adhesive tape.

Take high-quality Velcro, the quality of attaching the protective mesh to the window opening will depend on this. You will also need special material with small cells. The smaller the cells, the better. Such material can be purchased at fabric stores, or you can use old products, for example, unnecessary tulle.

Useful advice! It is best to purchase a special mosquito net - it reliably protects against insects and withstands atmospheric influences.

After all measurements are taken, take the material and cut it, do not forget to leave small allowances. Velcro divide into two equal parts. Apply glue to one part and carefully glue it to the window opening. After the glue has dried, attach the mosquito net to the adhesive tape. Similar grids can be made for a car.

Done quickly and easily with minimal cost. Instead of sticky tape, special magnets can be used, this will significantly reduce the installation time of the grid and simplify the process.

Frame window grids

A more costly and complex method of manufacturing a mosquito net is a frame-mounted method. To do this, you will need metal corners, plastic cable and rivets.

The first thing to do is to measure the window with outer side, because it is there that the mosquito net will be attached. On the cable, cut the desired length, adhering to the angle of 45 degrees. Sand the slices and connect with metal corners.

Now make holes in the corners in which the rivets will be located. They should be outside, not inside the cord. Now it remains to fix the mosquito net itself on the frame. Do not pull the mosquito net too tightly, as this can deform or tear the canvas.

You can make sliding mosquito nets with your own hands, they will fit well and protect the balcony opening or front door. A mosquito net on the balcony will help you prevent the penetration of dangerous insects into the room, it will reliably protect even from street dust.

The manufacturing technology is the same, the only difference is that the material is cut in the middle, the edges are processed. For convenience, you can attach magnets or rivets to the edges of the mesh, so you provide additional protection.

Roll mosquito net

Rolled mesh window operates on the principle of roller shutters. It will reliably protect against insects, and it is convenient and easy to use. If you are interested in how to assemble a rolled mosquito net with your own hands, then there is nothing complicated here. You just need to be patient and have the right materials.

This is important! You can make a mosquito net for a window of any size with your own hands. To make a rolled protective mesh, you only need special box with shaft and material. To attach the mesh to the window, use special magnetic latches.

You can apply fastening with screws with an overlap or at the end of the guide in the opening to the slope. It is more convenient to use a rolled mesh than a regular one, and it is much easier to care for it.

Rolled mosquito net on the window is an excellent protection against annoying insects. Allergy sufferers will especially appreciate this design - after all, it will protect the room not only from mosquitoes, but also from plant pollen and poplar fluff. The material for such a mesh is best to choose fine-grained, this will increase the level of protection.

Making a mosquito net with your own hands is not difficult. If you need a mosquito net for a balcony or window, you can make it yourself quickly and at no extra cost.

Give this process a few hours and enjoy a quiet life without annoying insects! A handmade mosquito net is quite inexpensive.

After the summer, it can be removed from the window and carefully packed, and in next year re-hang on the window.

Homemade and the cheapest option for making a mosquito net without using a frame. This option is to attach the mesh directly to plastic profile window.

DIY mosquito net on the window

There are many devices for such protection. If you decide to save money on purchasing insect repellents or insecticides, then it is worth remembering some very unpleasant moments that may accompany your communication with mosquitoes, mosquitoes and other flying, jumping and crawling brethren.

After all, this is not just an amazing discomfort, an unpleasant sensation of touching the wings of an obsessive, ear-cutting sound.

What you need to know about the need for insect protection

With the current ecological situation and the speed of mutations, even familiar, familiar mosquitoes and midges can acquire the most incredible properties and qualities. At the same time, it is worth remembering that for thousands of years insects have been carriers and initiators of the most various diseases- malaria, fevers and other epidemics.

Pay attention! Huge continents experienced waves of gigantic pandemics that practically mowed down more than half of the population, devastating cities and entire states. It seemed that such tiny creatures could do? But they are the carriers of swamp fever and other no less dangerous tropical ailments, which affect not only the local population, but people of the European race.

Numerous historically famous travelers and discoverers and lesser-known "tourists" of the past and present, those who managed to survive after traveling to the tropical and subtropical regions of Africa, America and the mysterious Indo-China, accurately describe all the horrors of those diseases that all kinds of flies and mosquitoes awarded them. If you have an opinion that it is anywhere but not here, then you are completely wrong.

Today, huge masses of the population migrate to those areas where such infections are widespread and there is a high probability that after a holiday in Malaysia or Singapore, part of the tourists will become passive carriers of a wide variety of pathogens.

And this is not all that you need to be afraid of. It is equally interesting that you should also think about your own safety in relation to your body's allergies. After all, the bite of such a nondescript insect can easily cause not only unpleasant sensations, but represents a real danger to life - allergic reactions are very different and very dangerous.

However, all this can be avoided not only by applying medications, insect repellents and other chemicals. There is the most reliable and time-tested method in those countries where insects are common - mosquito nets on window openings and doors.

Today it is made from modern materials and features excellent design and elasticity. It not only perfectly protects against midges and mosquitoes, annoying fluff, which is so annoying when poplars bloom.

Reasons for installing a mosquito net

Nowadays, without exception, all models of plastic windows are offered by manufacturers complete with mosquito nets. So that she does not spoil your mood and does not interfere good review, you need to consult with experts and choose the right everything that will allow the grid to be perfect - the color of the canvases and the size of the cells.

Then it is practically invisible and does not present any obstacle to sun rays and air currents. This is very important in design. modern window, where you can open it slightly or completely open it while maintaining the tension of the mesh web from insects.

Useful advice! This feature is very beneficial for owners of housing and offices on the first floors of buildings in big cities and on downtown streets.

It is this simple device that has an excellent protective function against dust, fluff, small insects and even minor street debris. And on high floors, it can save the lives of your favorite pets - from a hamster, a parrot to a cat that loves to relax on the windowsills, watching what is happening below.

Equally interesting is that the mosquito net is easy to install, which makes it very convenient to place on the door as well. Due to the fact that she can be the most different sizes and configurations, it is installed on windows and doorways any scale. Then you will have a calm and peaceful sleep, an abundance of fresh air in the bedroom, a cheerful mood in the morning and a boost of energy for the whole future day.

In most cases, installing a net from mosquitoes and other insects does not cause difficulties and does not require special skills.

Design features of the mosquito net

Nothing new has been invented for hundreds of thousands of years. The mesh material is simple to implement, and modern innovative technologies allow the creation of a lightweight structural model of a fixed type, which is a simple frame with a canvas stretched over it.

This is the simplest thing you could do with your own hands to protect against all sorts of unpleasant sensations and the consequences of mosquito bites. Do-it-yourself mosquito net on the window is very simple, you just need to study the technology and our manual well, choose the right materials.

The technology of this simple device is simple:

first you need to resolve the issue with the choice of canvas. The best option would be a fiberglass product coated with a rubberized composition, which is based on the chemical composition of PVC;
making a frame that matches the geometry and dimensions of the window or doorway where it will be located. They consist of a special aluminum profile for mosquito nets connected at the corners with plastic pieces;
overlaying the mesh and fixing it with structural rings or clamps to fix the mesh fiber.

Do not miss! How to make do-it-yourself roller blinds for plastic windows

If you have chosen just such a structure and fiber grade for the mesh, it will have the following qualities - resistance to atmospheric influences, excellent fire safety, not brittle in bends, and what is important for the external effect - does not discolor at all over time.

Types of grids and ease of use

Modern structural solutions for doors and windows are simply amazing, and the possibilities of their planar polyvariant opening make mosquito nets just as diverse. Today there are the following types:

It is important! framework. Acceptable for any windows and doors, convenient and practical. Most suitable for those who like to make home improvements with my own hands, easy to clean and well processed, brackets and fasteners allow you to remove it for the winter months;

door. The same as the previous version, but according to the size of the door, fastened with special hinges, easy to install and dismantle;

roller shutter. It is convenient because the design allows you to hide them by folding them into a special aluminum case at the top of the opening;

sliding. Used on terraces and balconies, has aluminum frame moving along the lower and upper rails on rollers. Easy to remove and washes great.

And at the end of our story about the benefits of mosquito nets, I would like to hope that you will make a choice between adhesive tapes, poison sprayers, fly swatters and mosquito repellents for the skin and the ability to simply make a mosquito net.

If you wish, you can purchase it, but one way or another, after installing it, you will no longer meet insects, poplar fluff, plant seeds and banal street garbage in your apartment.

Moreover, the prices are very democratic, and the product itself is worth buying or making urgently.

Do-it-yourself mosquito net - manufacturing, assembly, installation

Intrusive insects interfere with living and sleeping peacefully at night in the warm season. They fly into the house through open windows.

Despite the presence of a large number of special sprays and electric mosquito traps, only a mosquito net can significantly reduce the number of insects.

Today, when replacing windows, you can additionally order this element, which costs money.

How to solve the problem in the budget version? In fact, everything is very simple, since a do-it-yourself mosquito net is mounted very quickly from available materials.

Protective nets

Before you go to the hardware store for all the necessary components, you should decide on the type of mesh.

All of them differ in different parameters:

By type of attachment: hooks, Velcro, pins and Z-brackets.
By type of opening: stationary, removable, sliding and roll.
By the presence of a frame: frame and frameless.
According to the place of attachment: internal and external.

Pay attention! Each of the listed types has its own advantages and features, but with them, and disadvantages. All this is important to consider in order to make the right choice and not waste your money in vain.

Particular attention is paid to the method of attachment, so let's figure it out: what are the pros and cons?

The frame is very rigid, because it is made of metal with a mesh cloth. It can be installed both on plastic and wooden windows from any side.
Sliding mount is only suitable for aluminum windows, as sliding doors will be used.

A mosquito net with magnets is a very relevant option for those who want to quickly get rid of insects. It attaches to both windows and doors. In the latter case, you can not worry about the patency, as the curtains easily open and close instantly.

Rolled nets will allow you to lead effective fight with mosquitoes. The material can be easily rolled up and unfolded from a cassette placed above the window.

The simple Velcro fasteners are also easy to attach and remove. At the same time, the mesh can be washed in the washing machine at any time.

Note! Mosquito nets are installed not only on windows, but also on doors, as mosquitoes and midges also penetrate through them.

Canvas selection

The main element of any mosquito net is the canvas. You can buy it in any hardware store per meter or in a roll (approximately 30 m). If you need to make only a couple of nets, then it is better not to spend money and buy the required number of meters. For more protective nets, it is worth comparing prices: they may differ per square meter and per linear meter.

If we talk about quality, then it is important to consider several parameters:

cell size;
web thickness;
material type;
strength.

To create an anti-cat net, the strength parameter is very important, since it must withstand all the “attacks” of pets. by the most ideal option for this will be polyester with special impregnation. Additional fasteners are also required.

It is especially important to install such mosquito nets on the balcony.

When determining the size of the cells, consider the size of the insects in the area from which additional protection. The minimum section size is 0.25×1 mm.

Such a mesh can become a reliable protector not only from mosquitoes and flies, but even from sand, poplar fluff and dust. To protect windows and the room from rain, experts recommend a section of 1 × 1 mm.

Having decided on the materials and making necessary purchases you can start making. How to make a mosquito net for a frame and frameless window yourself will be discussed below. The protection will be as functional as it was from production.

Note! The material from which it is made will be responsible for the quality of the protective mesh. AT recent times Polymer-coated fiberglass is the most popular.

Manufacturing of frameless mesh

This is the simplest and a budget option, which will allow you to make a removable mosquito net, spending little money. The easiest way to make the protection stationary is to glue the canvas to the window frame.

To make it better fixed at the edges, sew a ribbon of material with high properties adhesion. When it comes to wooden windows, ordinary pushpins can act as additional fasteners.

Useful advice! There is one significant drawback here - such a mesh cannot be removed for washing.

It is better to put a little more money and effort to get universal protection. It's a Velcro mesh.

To make it yourself, you will need the following materials:

anti-mosquito material according to the size of the window;
Velcro tape (burdock - one side with a pile, the other with hooks);
construction adhesive.

Measurements are taken along the inner (opening) part of the window with a margin of 1 cm on each side. This size is necessary to fix the future mosquito net.

One part of the adhesive tape is fixed around the perimeter of the window using building glue (for example, Titanium) or a simple double sided tape. The second is sewn around the entire perimeter of the mesh.

When everything is ready and the glue is completely dry, you can fix the protective sheet.

The whole process of work takes a maximum of 2 hours, and as a result, everyone receives reliable protection from insects.

Note! Before gluing Velcro to plastic, it should be thoroughly washed and degreased with alcohol.

Fabrication of a frame type mesh

Unlike the previous method, it is somewhat more complicated, but still everyone can handle it. It should be noted that such option is suitable and for the manufacture of mosquito nets on the door.

So, for mounting the frame with your own hands, you will need the following components:

cable channel rectangular section 15 × 10 cm (the length is determined independently based on the outer parameters of the frame, where the frame will be fixed);
metal corners 10 mm - 4 pcs.;
blind rivets - 16 pcs.;
thin nylon mesh;
construction adhesive.

Instruments:

knife;
whetstone;
pencil;
scissors;
roulette.

We turn to the construction of the structure:

This is important! We measure the outer side of the window opening. Based on the data received, a frame will be made.

We mark the length and width on the plastic box.

Using a knife, cut off the vertical and horizontal parts at an angle of 45 °. The places of cuts are carefully polished with a whetstone.

We assemble the structure: we fix the corners with special connecting metal corners with rivets (nuts and screws are also suitable).

We apply a mosquito net with an allowance of 2 cm on each side.

In the upper part, we clamp the canvas with the cover of the plastic cable channel. In the process of snapping, we change the long and short sides. For reliability, some places are glued with glue.

Cut off excess fabric with scissors.

The finished mosquito net is installed in the window opening using Z-shaped brackets.

Restoration of mosquito nets

An equally important process is the restoration, which includes the following main stages:

Removing the frame from the brackets.
Cleaning from dust and dirt.
Removal of damaged capron.
Installation of the repaired mesh in the window opening.

Before replacing any element in the structure, it is necessary to pay attention to how it is fixed and whether it can be removed. Most of the elements on the mosquito net from the manufacturer are fixed with a special sealing cord. If you carefully remove it, the holders will easily be removed.

Pay attention! Pay attention! All repairs are carried out very carefully. It is important to remember that you are working with a fragile structure.

As you can see, in order to make a mosquito net with your own hands, you will have to spend 2 or even 3 times less than when ordering a similar design from the manufacturer. In addition, the installation process is quite simple, does not require special knowledge and equipment.

Mosquito nets have firmly entered the life of a modern person, as they are able to reliably protect against insects entering the room. Their only drawback is high price. Therefore, the owners country houses tend to make it yourself from improvised materials. Installing a mosquito net on a plastic window with your own hands does not cause any difficulties.

Do-it-yourself mosquito net from a cable channel

A do-it-yourself mosquito net from a cable channel is a great alternative to a store-bought one.

Mosquito nets produced in factories are practically invisible, do not prevent fresh air and light from entering the room. At the same time, they well block the path for dust and insects. Mosquito stacks are durable, easy to install. When buying plastic windows, the owners of apartments and houses must also purchase them.

Given the high cost of such an assembly, many have a natural desire to do everything on their own. In addition, if the window is of a non-standard size or shape, custom-made construction will cost even more and the waiting period may surprise impatient customers. All these difficulties can be avoided if all these problems are solved without outside help.

We offer you to get acquainted with the types of mosquito nets that are sold in Russia, namely:

• swing;
• sliding;
• pleated;
• rolled.

Each type has its own advantages and disadvantages. For example, pleated and rolled mosquito nets do not require dismantling for the winter and they are quite compact, but they are expensive. Swing and sliding take up space from the room, so many refuse to use them.

Pictured frameless mosquito net

A do-it-yourself mosquito net from a cable channel is an excellent alternative to a store-bought one, and in terms of quality and durability it is in no way inferior to the factory version. For the manufacture of the structure, it is necessary to purchase the following materials:

1. Cable channel of the right size.
2. Grid.
3. Metal corners.
4. Rivets.

Video on how to make a mosquito net from a cable channel with your own hands:

Installing a frameless mosquito net on a plastic window with your own hands, video

Resourceful craftsmen have found many alternatives to the traditional mosquito net. For example, meshes on tapes for fastening are very popular. How to make such a design yourself? To do this, you should purchase such details, namely:

• insect net with small cells;
• sticky tape;
• glue.

Before installation, the plastic window is thoroughly washed. Now we need to do the markup. To do this, the window is inspected and markup is performed. It is worth choosing a place for fastening the tape so that it does not interfere with the closing of the window. The plastic surface is degreased, after which glue is applied and one strip of tape for fastening is glued. Now it remains to wait until the glue dries.

In the meantime, you can start making the insect net itself. Determined right size by measuring the window diameter with a tape measure. The mesh is cut to a specific size. The second part of the tape is sewn to the mesh around the perimeter, as shown in the photo. After the glue has hardened, you can begin to install the mesh on the window.

Video about a simple way to make a mosquito net:

Making mosquito nets with your own hands: choosing a canvas

The canvas is one of the main details of any mosquito net. In stores, the choice is simply huge and it is easy to make a mistake when buying. If you purchase material with the wrong cell size, you can completely ruin the business at the very initial stage. What to look for when choosing the optimal type of material? To buy a quality mosquito net, you should pay attention to the following parameters:

• cell diameter;
• canvas density;
• material type.

Pet lovers are always worried that pets do not damage the mesh. In this case, it is worth purchasing a durable anti-cat material that will withstand the attacks of pets. by the most the best option meshes of increased strength will be polyester or polymer-coated fiberglass, capable of withstanding additional loads.

There are canvas options that are ideal for protecting the room not only from insects, but also from street dust and rain. In addition to the fact that the cross section of the cells in such nets is only 0.25x1 mm, it is additionally equipped with threads. However, it should be borne in mind that the smaller the cell diameter, the less air will enter the room.

Making mosquito nets with your own hands: installation rules

Starting the installation of a mosquito net, it is necessary to thoroughly clean the window frame from dust. After that, it is recommended to degrease the profile. For this, do not use caustic liquids, such as alcohol, thinner, acetone. A soapy solution is enough, and then the frame is wiped dry with microfiber.

Installation of mosquito nets is carried out on special fasteners installed in the corners. It should be noted that the lower fasteners have smaller grooves than the upper ones. Thanks to this, the frame of the mosquito net will be securely fastened.

When buying a canvas for a mosquito net, you need to consider the diameter of the cells

Fasteners are screwed onto self-tapping screws, and the seams are sealed with silicone. Thanks to silicone rainwater and air will not penetrate inside the window frame. After screwing the lower brackets, a mosquito net is inserted into them and the upper fasteners are marked. The principle of installing a mosquito net on a plastic window is simple. At the beginning, the grid frame is wound up by the upper brackets until it stops. Then it is pressed closely against the window frame and wound up behind the bottom brackets.

Installing a mosquito net on a plastic window with your own hands is a fairly simple procedure, especially if you prepare for these steps in advance. It is clear that without suitable tools just not enough. If you do this work yourself, you will be able to save a lot of money from the family budget.

Active use plastic windows and doors is caused by the high consumer characteristics of these building products. However, during the operation of the presented modules, it is necessary to perform all routine operations in a timely manner in order to maintain the structures in working condition. Adjusting plastic windows and doors, lubricating fittings, cleaning products from dust - this, perhaps, is the whole range of work that requires the attention of the user.

Mosquito net for windows is considered a weak link and also needs periodic revision or replacement. And given the desire of many users to save money, let's look at how a do-it-yourself mosquito net is made on a plastic window.

Types of safety nets

Currently, several types of structures are actively used to protect the home from mosquitoes:

• Frame-type meshes are characterized by the presence of a rigid frame (made of metal-plastic profile) to which the mesh fabric is attached. Moreover, due to the presence of their own frame in such products, they can easily be used as swing systems (for example, for balcony or entrance doors) or fixed to the outer surface of the window frame using special corners or Z-shaped brackets (brackets).
• Frameless nets are fixed to the window frame with a special tape or cord. And due to the lack of complex structural elements, they are characterized by affordable cost.
• Roller mosquito nets have a design identical to roller blinds and can be used for frequent closing / opening of a window opening. In terms of price characteristics, these types of protection are the most expensive, which is why they are not widely used among users.
• Sliding mosquito nets are specially designed for use in sliding window systems. They are also equipped with a frame frame and move in a horizontal axis by means of special guide profiles.

Given the high labor intensity of manufacturing the last two options, it would be justified to consider the method of manufacturing frame and frameless mosquito nets.

Do-it-yourself frame mosquito net

Preparatory work

First of all, at the preparation stage, you should measure the width and height of the existing window opening. For these purposes, using a tape measure, measure the distance between seals of opposite profiles, both in height and in width. The data obtained must correspond to the dimensions of the light opening.

• Frame profile (MFP2);
• mesh fabric;
• Profile corner connectors (4pcs);
• Fixing cord (usually rubber);
• Accessories (handles, fasteners, latches, etc.).

In addition, if one of the sides of the mosquito net exceeds 100 cm, then to strengthen the structure, it is advisable to purchase a mullion profile (MFPI) with fasteners. Due to this element, a cross member is formed, which provides increased rigidity of the product.

Mesh frame making

This process should begin with sawing profiles, from which the required frame will subsequently be assembled. It should be noted here that in addition to profiles, connecting corners (plastic or metal) are used in the frame design, which, by their presence, somewhat increase the dimensions of the entire structure.

Thus, if you want to make a mosquito net equal in size to the size of the light opening, then from the measurements taken earlier, you should subtract the dimensions of the corner connectors (usually 10 mm on each side). Or, cut MFP2 profiles according to existing dimensions (without deductions). In this case, the mosquito net will overlap on the window frame, due to the increased size of the frame.

As for the sawing technology itself, this operation is best performed with a hacksaw. After that, it is recommended to process the cut points with a file or fine sandpaper.

The subsequent assembly of the frame frame is best done on a flat plane (table or floor). For what, the required rectangle is formed from the prepared sections of the profile, and the junctions of adjacent profiles are fixed by means of corner connectors (truncated corner guides are inserted inside the profiles).

It should be noted that the insertion of the connecting angles into the profile cavity is carried out with an interference fit, which may require working with a hammer (tapping should be done using spacers made of wood or similar materials).

As a result (after installing all the connectors) you should get a rectangular frame with right angles (90 degrees) and relative rigidity.

Next, you may need to install a cross member. For these purposes, the MFPI profile is suitable, which should be sawn off according to the resulting frame width minus 3mm. The impost is attached to the frame with the help of special holders, which are fixed in the groove of the frame profile.

Fixing the mesh to the frame

After the assembly is completed, a mosquito net should be laid on the existing frame frame, provided that it is 3-4 cm larger than the dimensions of the base on each side. And then it is necessary to fix the grid to the frame by drowning the rubber cord into the groove. This can be done with any rounded object, alternately straightening the mesh and sinking the cord around the entire perimeter of the frame.

When performing this operation, you should ensure that the grid is evenly distributed over the entire plane. Ignoring this condition can cause a distortion of the entire structure and, as a result, require re-work.

When the mesh is qualitatively fixed to the frame profile using self-tapping screws, the handles should be screwed, with the help of which the entire structure will be mounted / dismantled into the window opening.

At the end of the work, you should once again check the quality of the assembly of the mosquito net and cut off the excess cord and net that protrudes beyond the edges of the profile. This is best done with sharp scissors or a mounting knife. After that, the mosquito net can easily be installed on a plastic window.

How to install a mosquito net without a frame

Sometimes, it is justified to use frameless structures to protect the home from flies and mosquitoes. Moreover, the cost of such "equipment" is very acceptable, and all work can be done within half an hour.

Velcro mesh attachment option

To fix the masking mesh to the opening area, in this case, you may need the mesh itself, Velcro tape (often used for clothes and shoes) up to 10 mm wide, and adhesive.

The algorithm itself is carried out in the following order:

1. The window frame is cleaned of dust and debris (if possible, it is recommended to wash the window block with soapy water);
2. The opening is measured, and the Velcro tape is cut according to the available values.
3. Velcro tapes are divided into two parts and those that have hooks are glued to the inner area of ​​the window opening around the entire perimeter (for this purpose, the adhesive is smeared on the back of the tape). At this stage, you should make sure that the glued tape does not interfere with the closing of the window module. The bonding period is at least 3 hours.
4. According to the available measurements, the mosquito net is cut (in this case, you must not forget to add 10 mm on each side to the gate).
5. Having made a twist, using a needle and thread, the reciprocal parts of the Velcro tape are sewn to the mesh around the entire perimeter, with the fleecy part outward.

By matching the fleecy sections of the Velcro tape with the mating parts (with hooks) glued to the frame, the mesh will be securely fixed in the required position.

The indisputable advantage of this method of fixing the paint grid to the area of ​​the window opening is not only low cost, but also the possibility of dismantling and subsequent installation of the structure at any time.

Option for attaching the mesh to an existing groove

Sometimes, if you do not need to remove and install the mosquito net often, you can fix it in the existing groove of the window profile. For what it is enough to perform the following work.

Firstly, prepare a mosquito net (according to the dimensions of the existing opening + 50 mm on each side), and also purchase a rubber cord (4 mm in diameter).

Further, the sealant located along the perimeter of the opening should be removed from the window frame. And the free groove formed as a result of this is used to attach the web. That is, by distributing the grid in the desired location, starting from top corner directly through the network, the cord is recessed into the groove, which ensures high-quality fixation of all material to the frame area.

After laying the cord in the upper horizontal cavity, they move to the vertical section and thus move around the entire perimeter.

Given the density of the material, it is recommended to sink the rubber cord into the groove using a rounded object (screwdriver handle, knife, etc.).

You can control the quality of work by the cells of the grid (they must be of the correct shape). In addition, for aesthetics, sufficient material tension should be ensured.

At the end of the work, the excess mesh can be cut off, or carefully trimmed and used for subsequent dismantling (it will be enough to pull the edge).

In order to ensure that the process of self-manufacturing of the protective mesh does not cause difficulties, it is advisable to follow the following recommendations during the work:

• The size of the grid cell (usually varies from 0.6 to 1.2 mm) should be selected based on the climatic characteristics of the region. After all, small-sized cells, together with insects and fluff, will not be able to pass a sufficient amount of air and will thereby interfere with high-quality air exchange in the room. Optimal size cells (about 1mm).
• When choosing a mosquito net material, it is more justified to use polyester (least cost) gray color(least noticeable visually).
• When working at height, you must strictly follow all safety regulations and use the appropriate equipment and devices.

Thematic video

If you liked the material, I will be grateful if you recommend it to friends or leave a useful comment.

With the onset of heat, everything in the world comes to life. It would seem that romance, feelings, spring, summer, relaxation ... But in all this there is a reverse, dark and very unpleasant annoying side. Yes, with the onset of heat, insects awaken. This is a separate part of the memories of the long-awaited summer.

Is there a way to avoid meeting insects

Mosquitoes, flies, midges terrorize people every day. You can’t hide from them under a blanket - it’s hot. You can't run from them. scare away? Bad option. All fumigators, tablets and medicines from cans are ineffective.

The only and right choice is a strong defense. Mosquito nets installed on everything open areas(windows, doors, vents) will help repel the attack of unnecessary midges. But then the question arises of how to make this barrier.

Varieties

Mosquito netting is getting more and more popular these days. Now in almost every window you can find green or blue bars. The material itself, from which this barrier is made, differs in structure and quality. For example, there are soft-type nets, and there are hard ones. Some cells are larger, while others are smaller. All these parameters affect the quality of protection, throughput, mesh durability, etc. Also, barriers differ in the place of use. There is a mosquito net on the window. It, as the name implies, can be installed on balcony frames and in the windows themselves. There is a mosquito net on the door.

This "heavy artillery" is used most often in country ladies. Where the doorways are open all day. No less significant differentiation occurs according to the type of attachment. Standardly, these are hooks for which a frame with a grid is attached, but there are also more interesting examples. Recently, a mosquito net with magnets has appeared on the market. Very convenient to use. There are also Velcro nets. The principle is almost the same, only the materials are different.

Any mosquito net performs its direct function - protection from insects. The remaining additions are there only to simplify operation.

Why pay when you can do it yourself

Yes, it's not bad if the house has a mosquito net. You can do anything with your own hands, but when it comes to making such things, you need to ask yourself: “Can you do it?”. This is where you need to think carefully. Do-it-yourself mosquito net is quite simple. Buying this design is not always profitable. First, it's cheaper to do it yourself, that's a fact.

Secondly, sometimes commercial options will not fit the very place of destination: a window or a door. A frame for a mosquito net is not always suitable for old Soviet openings. Or new, but non-standard sizes. Be that as it may, a mosquito net, which is not so difficult to make with your own hands, is in some cases more practical than a purchased one. The choice is made, let's get started.

DIY mosquito net (option one)

First you need to decide on the type of construction. Again, there are many types of mesh barriers. Which one to choose? To get started, you need to decide on the object.

In this case, let there be a window. If it is old, wooden, then you cannot cook a lot of porridge with it. Because of the dilapidation, the “upgrade” of the window runs the risk of ending in failure. The frame may crack, and then the whole thing will come to an end. Therefore, it is necessary to attach a mosquito net carefully and according to a certain technique. This is done in two stages. The first is work on the workpiece. The second is installation.

First stage

You need to start by building a grid. It will need some material. Actually, the mosquito net roll itself, wooden twine (preferably square shape), buttons and small nails. The matter is simple and uncomplicated. First step. You need to measure the window frame.

From the received data you need to take one and a half centimeters. He will go to various frauds. The second step is the preparation of the frame for the mesh. Wooden twine must be sawn to fit the window and fastened together with nails. We attach a mosquito net to this base (using buttons). It is better to bend the edges of a kind of barrier. So the view will change, the product will become neat, the grid will not diverge.

Stage two

Here you have to tinker with the windows themselves. How will the frame be attached? Above and below there are two hooks for which the base will go. You can attach them with glue. Since any rough intervention in a wooden window can lead to depressurization. And these are drafts, and a frame swollen from water. Why is this needed? It is important to install the above hooks so that they do not interfere with the closing / opening of the window. And now the mosquito net on the window is ready, it remains to connect the two parts together.

"Heavy artillery"

Windows, of course, should be protected in the first place, but do not forget about other passages. A mosquito net on the door will help, especially on very hot days, to leave the passage open. So a light breeze will enter the apartment, but unnecessary insects will not. How to implement this plan? The mesh on the door can be equipped in the same way as the window. That is, build a wooden frame, pull a mosquito barrier over it and fix it at the bases.

Sounds simple. But not everything is so good. The dimensions of the doorway are much larger than the dimensions of a small window. It's worth remembering. Because of this, the construction itself will be difficult (the frame is huge, so the mesh will sag in one place or another, and this is already a reason for insects to crawl into the gap formed). Which exit? The location of the door gives many options. One of them is the most profitable. The mosquito net in the doorway will not be static. Like this? The insect barrier is best left taut.

Working process

As always, first you need to measure the future surface, you should add one and a half centimeters to the results obtained. The idea is simple. It is worth making holes in the grid and putting special rings on them (you can buy these at any needlework store). They close themselves. These rings will not allow the mesh to spread at the seams, which is what you need. As for fasteners, they can serve as the most common nails. Preferably a small size. The scheme is like this. Every ten centimeters there will be a ring. It must match the nail. This should be done qualitatively and slowly. Otherwise, curvature cannot be avoided.

Alternatives

Installing mosquito nets takes a lot of time and effort. Therefore, not everyone can afford this pleasure. But there are new options that can make the process easier. Mosquito net on magnets is a wonderful alternative to classic frames. Such a grid is not afraid of either wind or rain. She won't peel off. Only a person can remove it. How does it work? There are two bases here. The first is an iron edging. The second is the magnets themselves. It is impossible to make this option yourself: there are no necessary materials. But try to install - always please. The iron frame is attached to the window frame with small screws. This is probably the whole mess. The rest - for the forces of attraction. Small magnets are sewn into the mosquito net. If you attach them to the frame, they are tightly attracted. A couple of hand movements so that everything is tightly pressed against each other, and the installation is complete. At the right time, this barrier can be removed.

Any mosquito net will protect the house from annoying insects. It just takes a little effort.

If you decide to save money on purchasing insect repellents or insecticides, then it is worth remembering some very unpleasant moments that may accompany your communication with mosquitoes, mosquitoes and other flying, jumping and crawling brethren. After all, this is not just an amazing discomfort, an unpleasant sensation of touching the wings of an obsessive, ear-cutting sound.

What you need to know about the need for insect protection

With the current ecological situation and the speed of mutations, even familiar, familiar mosquitoes and midges can acquire the most incredible properties and qualities. At the same time, it is worth remembering that for thousands of years insects have been carriers and initiators of a wide variety of diseases - malaria, fevers and other epidemics. Huge continents experienced waves of gigantic pandemics that practically wiped out more than half of the population, devastating cities and entire states. It seemed that such tiny creatures could do? But they are the carriers of swamp fever and other no less dangerous tropical ailments, which affect not only the local population, but people of the European race. Numerous historically famous travelers and discoverers and lesser-known "tourists" of the past and present, those who managed to survive after traveling to the tropical and subtropical regions of Africa, America and the mysterious Indo-China, accurately describe all the horrors of those diseases that all kinds of flies and mosquitoes awarded them. If you have an opinion that it is anywhere but not here, then you are completely wrong.

Today, huge masses of the population migrate to those areas where such infections are widespread and there is a high probability that after a holiday in Malaysia or Singapore, part of the tourists will become passive carriers of a wide variety of pathogens. And this is not all that you need to be afraid of. It is equally interesting that you should also think about your own safety in relation to your body's allergies. After all, the bite of such a nondescript insect can easily cause not only unpleasant sensations, but represents a real danger to life - allergic reactions are very different and very dangerous.

However, all this can be avoided, not only by using drugs, insect repellents and other chemicals. There is the most reliable and time-tested method in those countries where insects are common - mosquito nets on window openings and doors. Today it is made of modern materials and has an excellent design and elasticity. It not only perfectly protects against midges and mosquitoes, annoying fluff, which is so annoying when poplars bloom.

Reasons for installing a mosquito net

Nowadays, without exception, all models of plastic windows are offered by manufacturers complete with mosquito nets. So that it does not spoil your mood and does not interfere with a good view, you need to consult with experts and choose the right everything that will allow the grid to be perfect - the color of the canvases and the size of the cells. Then it is practically invisible and does not present any obstacle to the sun's rays and air currents. This is very important in the construction of a modern window, where you can open it slightly or fully open while maintaining the tension of the mesh web from insects. This feature is very beneficial for owners of housing and offices on the ground floors of buildings in large cities and on the main streets.

It is this simple device that has an excellent protective function against dust, fluff, small insects and even minor street debris. And on high floors, it can save the lives of your favorite pets - from a hamster, a parrot to a cat that loves to relax on the windowsills, watching what is happening below. Equally interesting is that the mosquito net is easy to install, which makes it very convenient to place on the door as well. Due to the fact that it can be of various sizes and configurations, it is installed on windows and doorways of any scale. Then you will have a calm and peaceful sleep, an abundance of fresh air in the bedroom, a cheerful mood in the morning and a boost of energy for the whole future day.

In most cases, installing a net from mosquitoes and other insects does not cause difficulties and does not require special skills.

Design features of the mosquito net

Nothing new has been invented for hundreds of thousands of years. The mesh material is simple to implement, and modern innovative technologies allow the creation of a lightweight structural model of a fixed type, which is a simple frame with a canvas stretched over it. This is the simplest thing you could do with your own hands to protect against all sorts of unpleasant sensations and the consequences of mosquito bites. Do-it-yourself mosquito net on the window is very simple, you just need to study the technology and our manual well, choose the right materials.

The technology of this simple device is simple:

• first you need to resolve the issue with the choice of canvas. The best option would be a fiberglass product coated with a rubberized composition, which is based on the chemical composition of PVC;
• making a frame that matches the geometry and dimensions of the window or doorway where it will be located. They consist of a special aluminum profile for mosquito nets connected at the corners with plastic pieces;
• overlaying the mesh and fixing it with structural rings or clamps to fix the mesh fiber.

If you have chosen just such a structure and fiber grade for the mesh, it will have the following qualities - resistance to atmospheric influences, excellent fire safety, not brittle in bends, and what is important for the external effect - does not discolor at all over time.

Types of grids and ease of use

Modern structural solutions for doors and windows are simply amazing, and the possibilities of their planar polyvariant opening make mosquito nets just as diverse. Today there are the following types:

• framework. Acceptable for any windows and doors, convenient and practical. Most suitable for those who like to make home improvements with their own hands, easy to clean and well processed, brackets and fastenings allow it to be removed for the winter months;
• door. The same as the previous version, but according to the size of the door, fastened with special hinges, easy to install and dismantle;
• roller shutter. It is convenient because the design allows you to hide them by folding them into a special aluminum case at the top of the opening;
• sliding. Used on terraces and balconies, it has an aluminum frame that moves along the lower and upper rails on rollers. Easy to remove and washes great.

And at the end of our story about the benefits of mosquito nets, I would like to hope that you make a choice between duct tape, poison sprayers, fly swatters and mosquito repellents for the skin, and the possibility of simply making a mosquito net. If you wish, you can purchase it, but one way or another, after installing it, you will no longer meet insects, poplar fluff, plant seeds and banal street garbage in your apartment. Moreover, the prices are very democratic, and the product itself is worth buying or making urgently.

In contact with

Do-it-yourself mosquito net on magnets.

On sale there are curtains that trap insects on the street, the halves of which snap into place independently with magnets of reverse polarity. Products Chinese manufacturer requires refinement, an analogue of these designs is easy to make at home.

The price of a meter of magnetic tape with an adhesive layer on the reverse side ranges from 50 to 30 rubles per linear meter. For window structures, one side of this tape is applied along the perimeter of the opening. in the doorways, window openings it handles three sides. Then the contour of the canvas is sheathed with fabric, into which the opposite side of the magnetic tape is passed.

The convenience of the design lies in self-fixation of the sashes, mobility, quick installation at a new place of operation. With self-manufacturing, the design is three times cheaper, the user uses actual dimensions openings, ensuring complete blocking of access to insects. The only difficulty lies in correct location poles when passing through a fabric cover. It is impossible to mix up the polarity of the opposite side when gluing on the sides of the opening.

You can choose the density of the mesh yourself, additionally process it with sprays. In addition to insects in the premises, the amount of fluff, third-party debris that accidentally enters a room with a draft is significantly reduced. The design, unlike all previous modifications, is difficult to damage, which increases its resource.

MOSQUITO NETS OWN HANDS: MATERIALS, MANUFACTURING.

Not all window blocks are equipped with factory mosquitoes, some users are not satisfied with the large sizes of these products during off-season storage. Therefore, do-it-yourself mosquito nets are often created from improvised materials. There are several options without a rigid frame, home-made designs from a factory impost, suitable for the size of cable channels for electrical wiring.

Detachable options without frame

Do-it-yourself mosquito nets can be hung during operation on clothes, shoes, construction Velcro. The construction budget does not exceed 150 rubles, for which the canvas, fastener is purchased.

It is necessary to choose Velcro modifications, the reverse side of which has an adhesive layer. One part (with hooks) is glued along the perimeter of the window block near the sealing rubber tape. This distance is different for the PVC profile of individual manufacturers, therefore, you should measure its value before visiting the store.

The counterpart (fluffy) is attached along the perimeter of the canvas, the excess is cut off with a knife. Instead of a standard mesh, fiberglass can be used, the optimal color is black. Through the white cells, the contrast of the street space is reduced, therefore, this color is not recommended.

Removable mosquito net has another installation option. The budget will not increase, instead of a fastener you need to buy a cord (sold in sports, tourist, hardware stores). The diameter must correspond to 4 mm (it is checked by the label, not by measuring manually), the larger one will not fit in the factory groove, the thin one will fly out of it.

Do-it-yourself mosquito nets of this type are cut to the size of the opening with a perimeter allowance of 3 - 2 cm. Installation is carried out in stages:

• the mesh is laid on a groove in PVC profile
• the cord is pressed through it into this groove, starting from the corner
• for convenience, a wallpaper narrow roller can be used
• stretching is carried out alternately: top, side, bottom, second vertical

The advantage of this method is the easy adjustment of the tension, the cord can be removed to smooth out wrinkles. There are no problems with storing the canvas after removing it in the fall. The seals removed for the summer are lubricated, their resource increases (there is no solar ultraviolet, weathering).

Mosquito net from factory impost

If there are stores in the city that sell components, accessories for PVC windows, it is easier to make mosquito nets with your own hands from these elements. The budget in this case will turn out to be maximum, however, the products will still cost less. For homemade mosquitoes you will need a kit:

• frame profile (impost)

• connecting corners

• canvas
• cord desired diameter
• pens
• fasteners (Z-brackets)

The dimensions of the structure are taken taking into account the size of the opening - it corresponds to the internal dimensions of the grid. Manufacturing technology looks like:

• impost cut - two vertical, two horizontal blanks, for greater rigidity, an average jumper from the same material can be used
• assembly - the frame is assembled using corners, extensions
• close-fitting - the mesh is superimposed on the frame, pinched inside the groove with a cord on one short side, then the rubber seal is tucked around the entire perimeter, the edge of the cord, the canvas is cut off
• installation - the structure slides into the brackets fixed on the outer frame

The advantage of the method is the factory quality of the elements, the presence of original handles, corners, connectors. The impost is cut with a hacksaw, thanks to special elements, the cut is straight everywhere. The mosquito net does not differ in design, quality, resource from factory modifications.

Mosquito net from the cable channel

In small settlements, there may be no factory-made components for window sides on sale, or the addresses of these stores are not known to the home master. In this case, do-it-yourself mosquito nets can be made from cable channels that are guaranteed to be present on the construction markets.

The budget for crafts is 300 - 400 rubles, all operations initially take 2 hours, subsequent mosquitoes are created twice as fast.

Manufacturing technology is as follows:

• cut - unlike the previous case, the edge is cut in the miter box at 45 degrees
• assembly - greatest strength provides connection with metal corners on rivets

• fixing the web - the mesh is snapped into place by the retaining plates of the cable channels around the perimeter, starting from the short side

Field installation is similar to the previous case. If necessary, brackets can be made independently from improvised materials:

• aluminum strip
• piece of pvc profile

• two corners connected by the reverse sides

So that the plastic of the cable channel does not burst at the moment of tension, the riveter is located on the side of the plastic, the crumpled part of the fastener is on the side of the metal plate. The diameter of the drill when making a hole is indicated on the package of rivets or is selected according to the table.

By making mosquito nets with your own hands, the user ensures maximum integration of the design into the size of the existing opening. The comfort of operation increases, there are no cracks through which penetration of insects is possible.

An effective means of protection against mosquitoes and other small insects is a mosquito net. You can buy a ready-made design, or you can make it yourself. The use of modern materials makes it possible to make mosquito protection for a window made of mesh material, which will fit snugly against the window frame and have a neat appearance.

Types of protective mesh

Before starting production, you need to decide what type of mesh you need. They differ in various ways:

• by type of fastening - on hooks, on Velcro, on pins, on Z-shaped brackets;
• by type of opening: stationary, removable, sliding, roll;
• by the presence of a frame: on a frame (frame), frameless;
• at the place of attachment: internal or external.

Below it will be described how to make frameless - stationary and removable, as well as a mosquito protection option - a mesh on a cable channel frame.

How to make a budget version of a frameless mesh?

The simplest version of a do-it-yourself frameless mesh is stationary. The canvas is simply glued to the window frame. But since the canvas itself does not hold well, a strip of material with good adhesion must first be sewn along its perimeter. It can be any fabric tape. If you are installing on a wooden window, the canvas can be additionally fixed with buttons. The advantage of this method is maximum simplicity, the disadvantage is that the mesh cannot be opened or removed to be cleaned of contaminants. That is, after a while it will have to be dismantled and the whole procedure to be performed again.

The second option is Velcro mesh. In order to make it yourself, you will need the following materials:

• anti-mosquito cloth;
• Velcro tape (velcro, "burdock");
• construction adhesive.

Part of the tape is attached with construction adhesive to the inner quarter. That is, to that part of the frame to which the window sash adjoins when closing. The second part is sewn along the perimeter of the mosquito net. Before applying the adhesive, the section of the frame on which the adhesive will be applied must be degreased and cleaned of dust. The advantages of this type of frameless mesh are “reusability”, if necessary, it can be slightly opened or completely removed. In terms of cost, it also refers to the budget option.

To attach the Velcro to the frame, it is better to choose a transparent rubber adhesive, such as Tytan, which is then easily removed without residue. This is especially important if the window is plastic - overwriting and repainting like a wooden one will not work here.

Do-it-yourself frame-type construction

To make a frame with your own hands, you will need the following elements.

• Rectangular cable channel (15×10 mm). The length is determined based on the outer perimeter of the frame, where the frame will be attached.
• Metal corners (10 mm) - 4 pcs.
• Blind rivets - 16 pcs.

Of the tools you will need a saw for metal and a drill. First of all, the dimensions are taken - height and width. From the cable channel we cut 4 pieces at an angle of 45 degrees and fold in the form of a rectangle. Having put the corners on top, you need to drill holes in the profile so that they exactly match the holes in the corners. Then, with the help of rivets, the structure is connected - and the frame is ready. Please note that when riveting, the riveter must be located outside the cable channel.

After the frame is ready, you need to fix the canvas in it. It is superimposed over the frame and snaps into place with the cover of the cable channel. To fix it evenly, without sagging, you need to start fastening along one of the long sides. At the same time, you need to make sure that there is no distortion. Then the canvas is fixed on one of following parties frame.

It is better to fix the opposite sides with an assistant, as here you will need to provide a slight tension. At the same time, stretching the canvas, making sure that there is no skew and snapping the bar is inconvenient, so an extra pair of hands will come in handy here. The frame type mosquito net can be attached to the window in different ways. The most common is plunger, using Z-brackets.

To avoid snapping the bar, it is better to additionally fix it with glue. To do this, when the design is completely ready, a small amount of glue must be applied to the gap between the cable channel and its cover (bar).

How to choose a canvas?

The main element in any such design is the canvas. It is sold in rolls and by the meter. There are about 30 meters per roll. If you need to make 1-2 designs with your own hands, then it is better to buy by the footage. When comparing prices, please note: they can be indicated both per square meter and per linear meter. In terms of quality, the canvas differs in the following parameters:

• cell size;
• web thickness;
• material;
• strength.

The last indicator is important for the anti-cat grid. She withstands the "attack" of a pet, she is not afraid of cat's claws and teeth. Most good stuff for the manufacture of mosquito nets "antikoshka" - polyester with special impregnation.

If there is a cat in the house, then only a frame mosquito net can be installed. When installing, you need to take care of additional fasteners - the canvas to the frame and the frame to the window frame. This is necessary so that the animal does not fly out with the net.

The size of the cell is selected depending on the size of the insects in a particular area and what protection is needed from. The smallest cells have a cross section of 0.25x1 mm. They protect not only from mosquitoes, but also from small particles of sand and dust. A canvas with cells of this size will also become an obstacle to poplar fluff. To protect against raindrops, the cross section should not be larger than 1x1 mm.

The material from which the canvas is made is of great importance. It is he who is responsible for color stability and service life. Most reliable option- polymer-coated fiberglass cloth.

Having picked up a high-quality canvas, you can make a good mosquito net of a frame or frameless type with your own hands. It will have an aesthetic appearance, as well as meet all functional tasks. With it, you can ventilate the rooms without fear that uninvited visitors will fly into them: it will protect the house from mosquitoes, midges, and annoying flies.

With the onset of the first sunny days, the issue of protecting your home from flies, mosquitoes, midges and other flying insects becomes relevant. Owners of wooden windows traditionally fasten gauze or mesh to the frame with buttons. And in other cases, the assembled mosquito net on plastic windows with your own hands can become a salvation. Frame or rolled mosquito net is easy to install and remove, does not require special care and strict rules for operation.

Types of mosquito net

You can independently make a design of two types:

1. Velcro;
2. frame mosquito net.

The first option is simpler and more budgetary. Any woman can make and install such a grid, even without special tools. Frame grids are more practical, they will last for several years, do not deform and retain their basic properties.

To make a mesh with Velcro, you will need: a canvas with a mesh size of 1x1 mm; Velcro tape, on one side of which there is a pile, and on the other, small flexible hooks-grabs; glue for cork wood or mosaic tiles. A strip of tape with hooks is attached with glue around the perimeter of the window frame. After that, the required mesh segment is measured and cut out. The remaining strip of tape with a fluffy pile is attached along the edge. It is recommended to attach it to the frame 24 hours after the glue has completely dried.

Making a frame grid with your own hands

The frame structure consists of the following elements:

1. net;
2. painted aluminum profile;
3. fasteners for the frame;
4. crossbar;
5. fasteners for the crossbar;
6. plastic fasteners for corners;
7. rubber cord seal;
8. handles-holders for installing the frame in the window opening.

At the very beginning, we will tell you how to measure a mosquito net on a plastic window. . Measurements must be taken with the window sash open. Height and width must match the light opening. 4.5 cm of the window frame at the top and 4 cm at the bottom must remain free, they will be equipped with fasteners for the frame. Subsequently, when making a frame, it is important to take into account the width of the aluminum profile. Its standard dimensions are 25 mm.

The assembly begins with the preparation of the aluminum profile. Points corresponding to measurements are applied to it with a pencil, vertical and horizontal planks of the frame are cut out on them. Between themselves, they are connected by plastic corners, forming a frame.

The crossbeam should be 50mm less than the width of the net in order to be easily inserted between the side vertical slats. The main purpose of this element is the tension of the mesh.

In the center of the frame, the mesh can shrink due to tension, and the bar will prevent this.

At first glance, it may seem that a do-it-yourself mosquito net for plastic windows is a complex design and only an experienced craftsman who has special tools in his arsenal can handle it. In fact, when measuring and assembling, you can use improvised tools: a school ruler, a kitchen or stationery knife, scissors, and a screwdriver and a hammer can be found in every home.

After the frame frame is assembled, you can begin to tension the mesh. To do this, the frame must be turned upside down and laid on a stable horizontal plane. A piece of mesh is laid over the frame so that the protruding parts along the perimeter are equal.

Using a screwdriver or other flat thin object, a cord is tucked into the groove of the profile. It is placed on top of the mesh and holds it firmly inside the aluminum frame. In the process of work, it is important to stretch the canvas and straighten the formed folds.

Approximately in the center of the vertical slats, handles are installed for convenient installation of a mosquito net. They also roll up under the rubber cord. The remaining web of mesh around the entire perimeter of the frame is cut with a blade or a clerical knife, giving the product a finished, neat and aesthetically beautiful appearance.

Installing the frame grid

Before installation, the profile of the window frame should be prepared. Its surface is cleaned of dust and wiped dry with a soft, lint-free cloth.

For installation, special fasteners are used, which are screwed to the frame with self-tapping screws. Two fasteners are placed on the lower horizontal bar of the window profile, they are slightly smaller in size than the upper fasteners. For more convenient screwing, you can glue them to the frame with double-sided tape. After the screws are screwed in, it is recommended to treat all seams with silicone sealantto maintain the waterproof and heat-conducting properties of the plastic profile.

The upper fasteners are installed according to the same principle. To calculate their location, it is necessary to install the frame with the grid all the way to the bottom brackets, mark the height at the level of the top bar, then add 8 mm to this figure. When installing the mesh in the fasteners, you should hold the frame by the handles. First, the mosquito net is inserted all the way into the top brackets, and the bottom bar should pass freely over the bottom fasteners. The frame leans closely against the window profile, then smoothly lowers. If the top fasteners are not stable enough to hold the frame, it is recommended to reinstall them a few millimeters lower.

It is necessary to remove the mosquito net (for example, to clean it from dust and debris) as follows: holding the handles, the frame rises up, is removed from the lower fasteners, then falls down and exits the upper fasteners.

Summer has come. Finally, you can open the windows and ventilate the apartment. But in addition to fresh and warm air, summer can also bring unexpected guests to your home, ranging from annoying mosquitoes and ending with flies, bees and other living creatures. To avoid such a neighborhood, you should think about purchasing a mosquito net. But why buy it when you can make it yourself? Moreover, even a person who is not familiar with the basics of construction can make it. So, we need a mosquito net with our own hands. Making such a design will be quite simple.

Doing it better on your own

If you are thinking about getting rid of annoying insects, then most likely you are already interested in purchasing or making a mesh from them. So, how is a do-it-yourself mosquito net for plastic windows made? It is clear that a plastic window is not a wooden one for you. That is, you cannot drive nails into it. Therefore, there will be some nuances in creating a grid.

What do you need?

So we need the following:

The canvas itself, from which then a mosquito net for plastic windows will turn out. Everyone will be able to fix it with their own hands in the right place.

Contact tape (in the common people it is called "burdock" and is sold in any sewing store).

Frost-resistant glue (preferably transparent, but any will do).

That's all the materials that we need. total cost they are unlikely to exceed the limit of 200-300 rubles. The only thing that can spoil your mood is going shopping in search of the necessary goods. After acquiring everything you need, you can proceed directly to the creation of your masterpiece.

Preparation method

Work begins with the fact that the window you have chosen should be carefully prepared - wash the frames from dust and dirt, and then wipe the surface dry. This will provide best connection with our design. After the surface is ready, a thin bead of glue should be applied to each frame. We will put one side of the Velcro on it (the one with hooks). Do not be afraid to apply glue - the meshes created on the plastic windows will be easily removed. And if you want to remove the glue, you can easily do it with a spatula. Next you need to measure right amount grid and trim it under In order not to make a mistake with the size, you can attach it to the glued Velcro (only after the glue has dried!) And make the necessary marks. The second side of the contact tape (the one that is "fluffy") should be carefully stitched along the perimeter to the edges of the grid. It will be more correct if you sew the fastener along both edges, but one seam in the middle will also work. Now it remains to attach the finished mesh to and then connect our "burdock". Now you can not be afraid that "enemies" will pass through the plastic windows: the mosquito net does an excellent job with all pests and does not let them into the house.

Conclusion

As you can see, there is nothing difficult in the manufacture of this thing. And if you take the initiative and put your hands on it, then soon you will have your own mosquito net for plastic windows. You can do a lot with your own hands, the main thing is desire.