What to make a screen for a bathtub from. Bathroom screen with doors. Screen made of tongue-and-groove slabs

Almost finished. The walls and floor are lined with luxurious tiles, fortunately, today the assortment of them in stores can drive into a stupor not only the average person, but also experienced designer. New faucets sparkle with nickel and gold, shimmer with reflections suspended ceiling, the new bathtub pleases with its extraordinary whiteness. But its facade doesn’t fit into all this splendor: all the unsightly communications, legs, and outer side This modern miracle of plumbing does not in any way harmonize with the interior created with such love.

What to do?

Naturally, something needs to be covered. How? Should I make it myself or buy it ready-made? This is the question that is almost always asked by the happy owner of an updated one according to the latest fashion trends bathroom. And we will try to help. Let's talk about what these designs are like and how to do it yourself, if this wise Solomonic decision was made.

Brief overview

Why Solomonic? Because it’s not always possible to buy what you want and what will fit the size and, most importantly, configuration new bath, which can be quite varied. Therefore, let's talk about what types of this design there are in general, how to make a screen for a bathtub yourself and, of course, what it is made of.

And why is it needed at all, by and large? In addition to being decorative, as mentioned above, a screen under a bathtub can perform several more functions. Firstly, it will protect communications from mechanical influence from the outside, and secondly, behind it you can arrange a warehouse for useful, but not very attractive in appearance, things.

Plastic

This option also does not require special material costs. But you will still have to work longer here. Do-it-yourself plastic bath screens are made either from large panels, the designs of which, by the way, are also very diverse, or from individual pieces of PVC cut to height.

To make such a design, you need to buy, in addition to the main component, a profile specially designed for this purpose, and decorative corners.

Process technology

We cut out blanks of the required height from plastic. We measure the length of the future screen, and then cut off the excess pieces from the guides. We make markings on the floor - draw a line along which we will install the lower profile. Then we directly install the screen under the bathtub. We insert PVC panels directly on the floor into the upper and lower guides. Then we apply glue along the marking line (in our case, these are liquid nails), top part We install the structures under the side of the bathtub, and the lower one directly on the glue. We wait until the glue dries, decorate the edges of the screen with corners (we place them on the same liquid nails). You can use it! True, such a screen under the bathtub will only serve a decorative function. It is not recommended to use it as a place to store any items - there will be too much fuss to constantly take out and then insert at least one of the panels, not to mention several.

If you still want to have a sliding rather than a solid structure, then it is best to adopt the following method.

A la wardrobe

This would be, perhaps, the best option of all that exist. Installing a screen for a bathtub according to the principle of a wardrobe is good in all respects. Firstly, the installation procedure itself is relatively simple, and secondly, the choice of doors for such a design is simply huge. These can be either ordinary MDF panels or mirror or glass doors. The latter, by the way, can be ordered with a pattern applied in accordance with your own wishes, thanks to which it will be possible to fit the screen into the existing interior as organically as possible.

What to do?

Go to the construction market, having previously measured the height and width of the space under the bathroom. There we find a pavilion that offers all the components for sliding wardrobes and buy guides, appropriate fittings and dowels (regular and “bug”). And then we select the doors. These can be ordinary MDF panels of any color, mirrored, or glass with beautiful prints. Here everything depends on the contents of your wallet and directly design idea. The store employees will certainly cut out the required pieces for you according to the given sizes, all you have to do is pay for the purchase. After which we go home with the purchased material, where we begin installation.

Description of work

We cut out the guides in accordance with the width of the opening, then fasten the upper one to the bathroom itself with dowels, and the lower one with self-tapping screws to the floor. We mount the fittings on the doors and insert them into the guides. We check that the wheels fit well into the grooves, since it is thanks to them that the doors will move apart. As you can see, the installation process is quite simple. The only negative is the rather high cost of such material. But the result is worth it.

How to make a screen for a bath: other options

Other methods of making a screen for a bathtub are more labor-intensive. This is the manufacture of a structure from plasterboard, the installation of which involves creating a frame from profiles, foam blocks, bricks, etc. As a rule, such screens are subsequently covered with ceramic tiles - the same as the bathroom itself, or in a different, contrasting color. It really depends on the wishes of the master himself. Each of these methods is quite labor-intensive and requires a separate detailed description. The only thing I would like to note is that making a screen from plasterboard will be the best option if you have a bathtub of a non-standard configuration. This material is very light and easy to work with, it takes a given shape well, so it can be used to decorate any surface.

So making a bathtub screen with your own hands is not such a difficult task. You just need to pick suitable option, which will match the design of your bathroom and functional features installed plumbing.

Modern acrylic bathtubs and trays are often equipped with special aprons that hide unflattering metal support structures and cover the empty space under the bowl. As for ordinary bathtubs, they are often sold without such fixtures and, unless the plumbing fixtures are designer and have decorative legs, That appearance bowls, leaves much to be desired. Attractive screens under the bathtub can correct the situation. What you need to know when choosing finished panel and how to assemble the structure yourself - read below.

A bath screen is a kind of apron, the main components of which are a frame made of steel or aluminum and waterproof panels. Behind such panels you can easily hide household chemicals and personal hygiene products (this issue is especially acute in small rooms, the space of which does not allow for many modules to be placed). Often, an acrylic bathtub is sold complete with a screen. Otherwise, the panel can be purchased separately or made independently.

Folding bath screens, which are usually equipped with shelves for storing detergents, look stylish and modern. The disadvantage of such designs is that they require free space next to the bathroom.

Today there are the following types of screens: hinged, sliding, stationary. Designs are selected depending on the shape of the bathtub. So, for plumbing fixtures that are adjacent to the walls, a front screen is suitable, and for figured design or bathtubs with one open side - a corner acrylic panel. Screens are often made with internal shelves and a pull-out storage system.

Choosing doors for the bath

A popular option that allows you to effectively hide household chemicals and close the space under the bathroom are hinged doors: they make it possible to easily and quickly get the necessary detergents, tools and any other household equipment, while looking attractive and stylish.

When choosing doors for a bathtub, you must adhere to the following recommendations:

Doors must be made of moisture-resistant material (for example, PVC, plexiglass). If the screen finishing is made of wood, then the wood must be ship grade (moisture resistant). Teak, wenge, and larch are suitable.
The handles should be comfortable, made of stainless steel or plastic. The same goes for hinges and fastenings.
Products should be selected to match the interior of the bathroom. This applies to both color version, and materials. For example, for modern bathrooms perfect choice There will be mirror screens, for rustic interiors - panels made of wooden planks.
If the bathroom already has furniture (hanging cabinets, vanity units), then it is better that the doors are the same as the fittings or as similar as possible.

When choosing products, it should be taken into account that the doors can be installed under bathtubs, next to which there are no other plumbing fixtures and household appliances, since nothing should interfere with the opening of the doors.

MDF bath screen: pros and cons

The bathtub door can be made of almost any material. The main requirement is that it must be moisture resistant. At the same time, it is desirable that the surface of the panels be smooth: this way, dirt can be easily and quickly removed from it. One of the popular materials for making screens is MDF.

Fiberboard has the following advantages:

Environmental friendliness. Today, MDF boards are made by pressing without the use of binding fibers, so the material is absolutely safe for humans and the environment.
Availability. Compared to plexiglass, MDF is much cheaper.
Attractive appearance. Externally, the material resembles wood, which makes the interior cozy and remains relevant regardless of fashion trends.
High density. This makes MDF resistant to hot steam and moisture.
Wide range of design possibilities. Panels can be made from fiberboard in any style and color.

The disadvantages of the material include its fire hazard: MDF boards are not recommended to be placed next to flammable objects or wiring. Also, MDF is not 100% moisture resistant: with extensive accumulation of moisture on the surface of the material, even when installed on a frame, it is well fixed MDF board begins to tilt under its own weight and become deformed.

Sliding bath panel

A sliding panel for a bathtub is a structure that consists of a durable frame with guides or a roller mechanism and mobile sashes. The panel doors work on the principle of compartment doors, allowing you to quickly get what you need and get to communications.

Sliding screens can have two or three doors (depending on the length of the bathroom), and be decorated using photo printing, mirrors, or frosted glass. Some companies offer custom-made panels: beautiful screen will be an effective addition to the design of the room and will emphasize the style of the interior.

Sliding bath doors are ideal for small sanitary facilities as they do not take up much space when operating.

The most affordable sliding panels for bathtubs are plastic. Plexiglas panels are considered to be the highest quality sliding screens: Plexiglas screens are 100% moisture resistant, have smooth movement, and are made from quality materials, can be made in various color options, have a mirror surface.

How to make a sliding screen for a bathtub with your own hands

The easiest installation method sliding screen DIY means buying a ready-made set of doors. If you can’t purchase a kit, then you can make the panels yourself. Most often, in order to make homemade screen They use plastic, aluminum profiles, corners and fasteners.

The sliding panel installation process involves:

Applying markings for the frame. The marking depends on the height and length of the bathtub, and is done using building level. The starting point, in this case, is the side of the bathtub.
Frame installation. Aluminum profiles connected in parallel using corners.
Installation of guides to the upper and lower frames.
Cut the plastic and install the sheets into the grooves of the guides.

The valve can consist of two or several elements. For convenience, metal or plastic handles are attached to the panels.

Making a monolithic screen for a bathtub from plasterboard

The easiest for self-made is a stationary bathtub screen, the main function of which is decorative (the panel will hide the space under the bathtub, but it will be impossible to store household chemicals behind it). To carry out the work you will need: drywall, guides with a supporting profile, material for external finishing.

To make a monolithic screen you need:

Make markings for the profile for drywall. The top edge of the bathroom is taken as the starting point for marking. At the same time, during work it is necessary to use a building level.
Install a frame made of a metal profile (most often a UD profile is used). For rigidity, not only the frame, but also the guides should be mounted.
Cut the sheet to size and sheathe the frame. If the screen is crossed by pipes, special holes must be cut in the material for communications.
Putty the joints between the sheets of drywall (if any).
Finish drywall. The sewn material can be decorated using tiles, tiles, wooden moisture resistant panels, plastic.

In the same way you can make a screen with a door. To do this, you will need to purchase it at a hardware store. inspection hatch and cut a hole in the drywall sheet for its installation.

How to make a screen for a bath (video)

Modern production of bath screens offers wide choice products, different in type, design, material of manufacture. Today, everyone can choose a panel depending on their own preferences, parameters and design of the bathroom, and the shape of the plumbing. In addition, you can easily make panels for a bathtub with your own hands. Install attractive and practical screens and enjoy the functionality and attractive appearance of your own bath!

2015-11-27 1

To has become beautiful and stylish, you need to take care of all the little things that can disrupt the harmony. First of all, this concernsspace under the bath, which often ruins the entire carefully thought out design. Open pipes look unaesthetic, and the rag and floor bucket distract from contemplation cozy interior. So how can you get rid of unsightly species anddecorate the room? It will help you with thisbath screen. It perfectly hides free space and gives the composition a complete and laconic look.

Of course, you can purchase a screen in a store (sometimes it even comes with a bathtub) or contact a specialist. But there is nothing difficult about doing this work yourself.

How to make a screen for a bathtub with your own hands?

First, you should decide which type of screen suits your requirements. There are only two of them: sliding and solid. The latter requires less effort and materials, it looks great, but has certain flaws.

The solid screen prevents storage of various cleaning supplies in the space under the bathtub, as well as chemicals(cleaners, washing powders and so on).
Solid screen does not leave access to pipes. As a result of a leak or the need to replace a pipe, you will have to disassemble the screen, do all the work, and then reassemble it. However, craftsmen offer great way get rid of this shortcoming - sanitary doors and hatches. They allow you to maintain the integrity of the screen, but at the same time give access to the pipes.

If you don't know how to do plasterboard bath screen, then follow these simple and popular instructions.

Prepare the slats, on which the entire structure will rest. Two of them should be equal to the inner line of the bathtub in length minus 1.2 centimeters. And the other two lines are the same in width minus 0.8 centimeters. You will also need four slats for the four corners of the bathtub to connect them to the floor.
Vertical elements can be immediately distributed into the corners. Then they are attached to horizontal slats(on narrow and wide sides). Those slats that end up against the wall must be screwed to it with screws. All elements should be firmly fastened each other in the same way.
Then cut out elements from a sheet of plasterboard required size. Remember that rooms with high humidity require material with special impregnation, which prevents it from swelling and deteriorating.
Then screw the drywall To wooden sheathing. The draft screen is ready. You can add a plumbing hatch and then finish it with plastic or tiles.

It will help you to make a screen under the bathtub with your own hands video:

Do-it-yourself sliding screen for a bathtub

It is impossible to completely get rid of the shortcomings of a continuous screen. You can get to the pipes through the hatch (often with great difficulty), but you won’t be able to hide a bucket in the space under the bathtub. Sliding screen may look less aesthetically pleasing, but it more functional than its “brother”.

To make it you will also need wooden slats, which will become the basis for the screen. But to such a frame, instead of drywall, as in the first option, you need to attach guide profile along the length of the bath, to which the doors will be attached.

It is best to fix it with self-tapping screws, but you can also use liquid nails.

Advice. If you want the screen to look perfect, then place two starter strips on the sides, attaching them to the walls.

Then you need cut panels suitable size and install them into the finished profile. Please note that the dimensions of the elements should be such that the doors overlap each other by a few centimeters, then your screen will look beautiful, and you will not have to waste time on perfectly fitting the doors to each other.

After the main work on renovating the bathroom and installing plumbing has been completed, it becomes necessary to cover the side of the bath with a screen, mainly for decorative purposes.

At this stage of finishing, many novice builders have a question about how to make a screen for a bathtub with your own hands. Our article will tell you about the progress of its production in detail, so that even beginners can cope with the task.

Types of screens

Stores offer users a large selection ready-made options, however, they often differ only design solution, but in terms of sizes the range is not always so wide. In this regard, it can be difficult to purchase a Bath Screen of the required size.

Making a screen yourself does not cause such difficulties, because the product will be ideally suited to a specific plumbing fixture.

The most common types:

plasterboard screen;
screen made of tongue-and-groove slabs;
tile bath screen;
screen made of PVC panels;
sliding screen made from ready-made elements.

Let's take a closer look at how each type of screen is manufactured.

Plasterboard construction

Frame installation

Before you make a screen under the bathtub from plasterboard, you need to assemble a frame for it. To do this you will need wooden blocks measuring 40x40 mm, fasteners (screws) and metal corners(later these bars are placed at the corners of the bathtub and attached to the wall with screws).

The preparation of slats for the frame is carried out as follows:

From the corner of the square facing the bathtub, lines are drawn on the floor, connecting them with the lines from point 2.
It is necessary to make slats from prepared wooden blocks, the number of slats is as follows:

4 slats for the vertical sides of the frame, their length is equal to the distance from the floor to the lower edge of the bathtub side;
2 slats for the horizontal frame on the shorter side of the bathtub; its length is calculated as follows: subtract 80 mm from the length of the line drawn on the floor parallel to the short side of the bathtub (that is, the width of the bar 2*40 mm multiplied by 2 = 80 mm);
2 slats for the horizontal frame on the long side of the bathtub; its length is calculated in a similar way, however, 120 mm is subtracted from the length of the line (triple width of the bar 3 * 40 mm = 120 mm)
if the bathtub is quite long, it is worth making several additional vertical slats (shortened by double the thickness of the bar - by 80 mm).

In order for the screen structure to be as rigid as possible, it can be attached not only to the walls, but also to the bathroom floor.

Making a frame from plasterboard

In production, moisture-resistant drywall is used (for obvious reasons, you should not replace it with regular one). If it is not planned to tile the drywall in the future, then the material is painted in the desired color.

So, to make a screen for a plasterboard bathtub, we will need:

1 sheet of drywall;
metal latch;
hinged hinges (necessary for fastening the inspection hatch).

The frame for the bathtub is made as follows:

If the screen under the bathtub will be tiled in the future, then the shape (square or rectangle) and dimensions of the hatch should be taken based on the size of the tile, so that the hatch can be decorated.

Fasten the long panel to the frame with screws, then the shorter one.
Finally, the panels are also connected to each other using screws.
Check the resulting structure for resistance to mechanical stress. If stability is insufficient, it is secured additionally.

Curved screen

If you need a curved screen for a plasterboard bathtub, you can also make it yourself.

The installation principle is similar to a regular screen, but has its own characteristics:

You need to make 2 such curved profiles, and then secure them with self-tapping screws. After this, vertical slats are installed to strengthen the frame.
The frame is mounted at a certain recess from the side of the bathroom - this distance is equal to the thickness of the plasterboard sheet + the thickness of the tile + the thickness of the tile adhesive layer.
After making the frame, they begin to install the screen itself under the bathtub.
To do this, wet the front surface of the drywall and gradually bend it, giving it the desired shape.

If the bend curve is too large, a sheet of drywall can be cut into vertical strips and secured to each strip individually.

Sliding screen

It is often easier to purchase than to make your own.

The cost of materials will exceed the cost of the finished product, and the amount of labor involved will be disproportionately greater compared to simple and accessible installation finished screen. However, if you need a sliding screen under corner bath, then you still have to build it yourself.

In addition, sometimes ready-made screens required size not on sale. For example, acrylic sanitary ware is usually supplied with an acrylic screen for the bathtub, suitable for a specific list of models, but for some reason manufacturers do not produce sliding products.

The screen is made on the basis of a partially finished structure, so only the task of adjusting the product to the shape of the bath falls on the shoulders of the master.

To do this you will need:

ready-made shutter doors designed to create sliding doors in kitchen and office furniture) – the required number of sections in length;
90 degree corner – 2 pcs;
corner 45 degrees – 2 pcs (the quantity depends on the specific shape of the bend);
handle panel – 1 piece;
sheet Chipboard size 400x2500 mm;
bath border roll;
legs – 3 pcs;
flat plastic rail (tire) of the required length.

The corner screen for the bath is mounted as follows:

Cut the plastic slats to the required length - they will cover the joint between the screen and the doors. With the help construction hair dryer required areas the slats are heated to 250 degrees and bent, giving them the required shape.
The frame on which the doors are attached is overlapped onto a section of the wall behind the bathtub, equal in length to the size of the opening formed when the screen is open.
This is necessary so that part of the wall “runs away” behind the bathroom when opened.
At the junction of the wall and the screen, 90-degree corners are installed - they should close the rotation of the doors.

Installing a screen on a bathtub of a non-standard shape

Cut out the bottom from chipboard for the future niche and attach the legs to it.
Slats bent to required form, attached to the corners.
The door frame is attached to the curved slats using liquid nails. The bottom is screwed using metal corners.
The joint between the side of the bathtub and the wall is sealed with a bathtub border.

The sliding screen for the bathroom is ready. All that remains is to lubricate the door guides with silicone grease so that the doors slide smoothly at an angle.

Screen made of tongue-and-groove slabs

A screen for a bathtub can also be made from tongue-and-groove slabs (TGP). This material is a slab measuring 900x600x80 mm, with grooves and protruding ridges on the sides.

It is worth noting that the plates are environmentally friendly.

Advice! If tongue-and-groove slabs are too thick for your bathroom and take up a significant part of the space, they can be replaced with gypsum particle boards with dimensions of 600x300x50 mm.

Installation of a screen under a bathtub made of tongue-and-groove slabs is carried out as follows:

The installation site of the future screen is cleaned of dust, and then the floor and walls are primed in this place; concrete contact or deep penetration acrylic primer is used as a primer;
Markings for the screen are made using a plumb line. The outer boundary of the bathtub is projected onto the floor by drawing two points and then connecting them in a line (if the bathtub is not sandwiched between the walls, it is necessary to project two outer boundaries).
5-6 mm are retreated from the resulting line and another one is drawn - the outer border of the future screen.
The indentation is necessary for tiling the screen (so that the top of the tile does not protrude beyond the border of the bathtub).
Start laying tongue-and-groove slabs.
The slabs can be laid using:

tile adhesive - in this case the slabs themselves are not wetted with water;
gypsum plaster - in this case, each slab must be moistened with water before installation.

Laying the slabs is quite simple due to the presence of grooves and ridges. The selected fastening solution is applied to the edge of the slab, installed in the right place, and then the correct position is checked using a building level.
The plate should fit snugly against the rest. It is necessary to provide a gap between them of approximately 5-6 mm, so the slabs will have to be upset by pressing or tapping with a spatula.
If the slab needs to be sawn, a cutting line is marked on it, and then it is cut along this line with a hacksaw.

Ceramic tile screen

The most popular option, made by hand, is a tile bath screen. It is created on the basis of a base of plasterboard or tongue-and-groove slabs - both options are described above.

Direct tiling is quite simple and is carried out as follows:

Depending on the size, 6-10 points of liquid nails are applied to each tile. Tiles can also be glued using tile adhesive.
The first tile is glued to the upper left corner and leveled using a building level.
The distance between the tiles is leveled using crosses.
If there is an inspection hatch, glue one or more tiles to its door (depending on their size).
The seams are grouted, and the screen under the tiled bathtub is ready.

If the screen has quite large sizes or it will be lined with heavy tiles, it is better to use ceiling guides rather than wood as a frame for drywall.

The structure is attached to the walls using self-tapping screws.

Budget option for a screen made of PVC panels

Let's consider the most inexpensive option. It is useful for those who want to save a lot and require the product to perform exclusively a function, for example, if it is necessary to make a bath screen from panels secured with liquid nails in a rented apartment.

In such a case, you can do this:

You should not glue it to just the guide, since it will be quite difficult to insert the panel into the glued rail.

Screen shape

The range of screens presented in large construction stores is quite extensive: the user can even purchase a folding screen for a bathtub. Because of this, it may seem that screens made by yourself are rather monotonous.

In fact, this is not true. The screen for the bathroom can be of any shape.

Let's consider three implementation schemes:

Making a bathtub screen with your own hands is quite simple, and besides, master builders can ample opportunities thanks to the abundance of possible options.

It is enough to simply choose an option that will fit into the design of a particular bathroom, as well as correspond to the size and functional features of the selected plumbing fixtures.

Gallery

A bath screen is a structure made from various materials and is used to hide communications. From a constructive point of view, there are several options for such protective panels, which allows you to choose the most suitable product for a specific interior. Screens allow you not only to protect pipes from moisture, but also to decorate a room, making it more functional and original.

Today, bath screens are classified into two main groups:

Solid;

sliding

Solid models are the most common and are characterized by simplicity. However, the simplicity of the design does not affect its effectiveness. The cladding of such a product, as a rule, is made with the same materials as the rest of the room (for example, tiles). Thanks to this, the panel fits organically into the interior of the bathroom.

Sliding models, in turn, are more functional. The design of such screens allows you to organize shelves under the bathroom for storing household chemicals and other household items. You can buy a screen for a sliding bathtub in any construction hypermarket or specialized store. It is also easy to choose and order the product you like via the Internet.

Advantages and disadvantages of solid models

Arranging a continuous screen in the bathroom allows you to achieve harmony in the interior of the room. The cladding for such a screen can be very different, but most often they use decorative tiles or mosaics. Products lined with mosaics look the most aesthetically pleasing. Let's look at the advantages of solid models in more detail:

this design has a long service life;
Solid tile bath screens are easy to clean. To clean the dirt, just use a damp cloth or sponge.

However, such panels also have some disadvantages that are worth paying attention to:

in some cases, the small dimensions of the viewing window are not enough to carry out repair work under the bath;
inability to store household chemicals under the bathroom;
If such a panel is available, replacing the bowl is accompanied by some difficulties, since the structure will have to be dismantled.

Pay attention! To access the communications located under the bathtub bowl, it is necessary to install an inspection hatch of sufficient size. If there is such a hatch, there are no problems with repairing pipes, since dismantling the shielding is eliminated.

Thus, a continuous screen is great solution for the interior of the bathroom, but its use is associated with some inconveniences.

Bath screen sizes

Protective panels differ not only in their design, but also in size. There are both standard and non-standard screen models. Today, the minimum length of these products is 105 cm, and the maximum can reach 190 cm.

Let's look at the dimensions of the most common screens:

length – 150, 170 cm;
width – from 50 to 56 cm;
thickness – 3 mm.

Less common model sizes are 160, 180 and 190 cm. Screening non-standard bathtubs is much more difficult, since it is not always possible to find a suitable product on sale. Bath screens 150 cm are the most common and are easy to install.

Solid panels are equipped with legs, which are necessary for adjusting or adjusting the product. Bath screens 170 cm are also standard and are used much more often than models whose length is 180 or 190 cm.

Screen design differences

The construction market offers many varieties of such panels to suit every taste. They differ in design and functionality. Many companies are engaged in the production of custom bath screens, which allows us to say with confidence that there is a large selection of these products.

Let's consider the types of such protective panels, depending on the design features:

standard;
multifunctional;
end

Standard models are the most common and consist of a plastic panel for which a frame of appropriate dimensions is selected. The multifunctional version differs from the standard one in that it has the ability to adjust the size of the screen under the bath (due to the legs). End panels are used to hide only a certain part of the bathroom.

Useful advice! Today you can find products equipped with various auxiliary elements that are necessary for convenience. Such products include panels with shelves, handles for people with limited mobility, as well as screens that include a hole for the legs.

Photos of screens for bathtubs can be easily found on the Internet, which greatly simplifies their selection.

Related article:

Types, advantages and disadvantages of sliding screens. Selection rules. Do-it-yourself assembly and installation of a sliding screen.

Features of plastic models

Plastic shielding options are the most popular today. They are distinguished by their attractive cost, as well as ease of installation and operation. The service life of such panels can reach 10 years (provided proper care behind them). Plastic screens are resistant to moisture and do not rot over time.

The main advantage of panels made of this material is variety color solutions. This is due to the ease of production of products from polymers. The functionality of such screens may also differ. In specialized stores you can buy plastic screens for bathtubs with shelves, sliding, solid, removable, folding, etc.

If desired, you can perform shielding yourself. To do this, you will need inexpensive polymer lining. This panel does not require additional facing works, which has a positive impact on financial expenses. To fix the plastic lining, it is necessary to mount a profile made of wood or metal.

The main disadvantage of plastic screens of any type is their poor resistance to mechanical stress (shocks). At self-installation plastic solid screen, you need to take care of organizing the door under the bathtub for quick access To hidden communications. You can make a special door yourself or purchase it in a store.

Acrylic bath screens

A popular type of protective panels, which is often sold complete with the acrylic bathtubs themselves. Such products are made from plastic material, which is subsequently treated with an acrylic layer. All of them are individually designed. Therefore, experts do not recommend buying acrylic models separately from bathtubs, since finding a suitable option is almost impossible.

Acrylic panels are only suitable for installation under bathtubs made of the same material. In most cases, such panels are solid, however, other varieties can be found on sale. If it is not possible to purchase a suitable screen for a specific bathtub purchased previously, it is recommended to buy a custom-made screen for the bathtub.

Pay attention! Acrylic models have the same colors as the bathtub, which allows general design look organic.

One of the advantages can also be noted that such panels fit tightly to the sides of the bowl. The frame and fixing elements for fastening the panel are supplied to customers complete with the screen itself.

Screens made of MDF sheets and mirrors

MDF bath screen is most often used in classic design rooms, as they have a wood pattern. Wide range colors and textures allows you to choose a product that will suit any interior. MDF shielding looks stylish and expensive, which often attracts buyers. However, when purchasing such a screen, you need to pay attention to two important points:

products made from this material are only suitable for standard, rectangular bathtubs;
MDF screens are produced by pressing sawdust, therefore they are not resistant to moisture. In order to solve this problem, it is necessary to choose a moisture-resistant material that is equipped with a protective film.

Demand for mirror models It's quite simple to explain. Most modern bathrooms are small in size, and a mirror surface can visually increase the space of a room. Such panels also add play of light. They can be mounted at different angles, and also equipped with special lighting (for example, neon).

In any case, the mirror screen looks very impressive. However, such panels are not without their drawbacks, including fragility and difficult maintenance. Drops of water and stains on mirror surface much more noticeable than on any others, so you will have to wipe them quite often.

You can make a screen from MDF with your own hands, which will be exactly the same as

Drywall bath screen

Panels that are made from plasterboard material, differ in availability and inexpensive price. Organizing plasterboard shielding is quite simple with your own hands. In most cases, after installing a plasterboard screen, it is covered with ceramic tiles.

Important! To screen the space under the bathtub, it is necessary to use a moisture-resistant type of plasterboard sheet.

Let's look at the process of installing screens for plasterboard bathtubs:

First of all, you need to assemble the frame. The material for assembling the frame is timber with dimensions of 40x40 mm. At this stage, fixing elements and metal corners are installed.
Next, markings are applied to the walls and floor, which are needed for orientation during the installation process.
After applying the markings, the slats are installed along them. The slats are installed in both vertical and horizontal planes.
Next, the front panel is cut out of the plasterboard sheet, onto which hinged hinges or latches are installed.
The product is installed and an inspection hole is made in it.

Ceramic screens for bathrooms

Ceramic shielding allows you to organically decorate your plumbing unit. The main advantage of organizing a ceramic protective panel is that it looks as presentable as possible. Ceramic tiles are the main finishing material when organizing plasterboard screens, as well as tongue-and-groove slabs. Ceramic tiles are resistant to moisture, easy to clean, and also resistant to mechanical stress.

Installing a screen under a tile bathtub is quite simple. To carry out installation you do not need to have special construction knowledge and skills.

first you need to take measurements (width and height of the opening under the bathroom);
styling ceramic tiles produced from the left top corner. Very important point is that installation must be done strictly horizontally;
each individual tile element must be lubricated with tile adhesive;
The alignment of a ceramic screen consisting of tiles is carried out using special crosses. Such crosses are inserted into the gaps between the tiles and form the same distance for all structural elements;
Not only solid screens can be covered with tiles.

Bath curtain made of curtain fabric

People who have a hard bath panel installed constantly touch it with their feet. Bathtubs with such panels are inconvenient to clean. Using a curtain solves this problem.

Pay attention! This non-standard solution Suitable only for rooms with good ventilation, since the curtain is not able to protect the pipes from moist air.

Before purchasing a bathtub protection panel, you need to pay attention to the following points:

Before purchasing a panel, it is recommended to take measurements of the bathroom and bowl;
the choice of product design depends on two factors: the financial capabilities of the buyer and the dimensions of the bathroom. For example, it is not recommended to purchase folding screen models for bathrooms, the dimensions of which are standard. For small rooms Solid models are best;
a model with doors allows you not only to protect communications, but also to organize a small storage area under the bathroom for household chemicals and other items;

It is recommended to pay attention to the material from which the panel fittings are made. It is very important that the material has good resistance to corrosion;
the panel must be freely adjustable, so you need to check the legs before purchasing the product;
Aluminum is considered the optimal material for the panel frame;
MDF bathroom screens are suitable for rooms equipped with good ventilation system. Otherwise, due to stagnation of moisture, this material can quickly become unusable.

The design of the panel is selected depending on the individual preferences of the apartment owners. Assembling a bath screen with your own hands will save you a lot of money.

Riho baths

How to make a bathtub screen with your own hands from plasterboard and tiles

Before we start self-assembly solid panel needs to be prepared following tools and materials:

drywall;
building level;
facing tiles;
grout for facing tile joints;
grinder, drill, screwdriver;
special sealing compound.

Assembling a plasterboard panel is a common activity. This is due to the availability of the material, financial benefits and ease of execution of the shield. The moisture-resistant plasterboard used for these purposes has good flexibility, which makes it possible to create a panel of non-standard shape.

How to make screens under the bathroom with your own hands? Let's consider the sequence of actions:

First the marking is done. Markings must be applied to the walls and floor, which will eliminate installation errors in the future.

At the second stage it is necessary to form frame structure for the panel. The frame can be made from wooden slats or metal profiles. To assemble the frame, you need a drill and a screwdriver.
After the frame is ready, it is necessary to sheathe it plasterboard sheets. For this purpose, special self-tapping screws for drywall are used.
Next, you need to fill all the seams and joints in the resulting structure with a hermetic compound.
At this stage, the façade part of the plasterboard panel is treated with a primer.
At the end, the plasterboard panel is faced with ceramic tiles.

Useful advice! Experts recommend treating frame elements with protective compounds. This is necessary to improve the moisture-resistant qualities of the structure.

Thus, assembling a panel for a plasterboard bathtub with your own hands is not difficult. And the finished screen will significantly improve the appearance of the bathroom. If necessary, you can buy bath screens in a specialized store or on the Internet.

Installation of a plastic or acrylic screen on a bathtub

As a rule, the panel comes with instructions, which must be studied before installing the screen under the bathtub. For designs that differ only in size, the assembly process will not be much different. The main differences in this case boil down to the fact that the legs for panels for a high bathtub have an additional headroom (about 5 cm).

Let's take a step-by-step look at how to install a screen under a bathtub:

Before installing this structure, it is recommended to fill the bath with water.
It is necessary to install special handles on the outer panel of the screen, which are mounted for ease of use of the structure.
The legs of the product come separately. They must be inserted into the holes that are located with bottom side screen.
Next, you need to place the panel under the side of the bathtub.
After this, the structure must be fixed using auxiliary components.

In some cases, the bathroom is distinguished by the fact that it has protruding communications or baseboards, the presence of which prevents the shield from completely covering the free space under the bathroom. How to install a screen under the bathtub in such a situation? It is best to measure the parameters of the protruding elements and make a corresponding hole in the screen. Then the screen will not bump into a protruding element of the plumbing unit. Of course, you can remodel a bathroom, but this more labor-intensive and expensive undertaking is not suitable for everyone.

How to install a screen on an acrylic bathtub?

To install the screen on an acrylic bathtub, you must adhere to the following work algorithm:

First of all, you need to make markings on the side and screen. The markings must correspond to the fixation points.
At the next stage, you need to place the shield against the bathtub at a certain angle of 30–40° and place its top between the side and the mount.
Next, the previously marked places on the side and the shield are drilled for screws.
At the end, the holes that must match are fixed with self-tapping screws.

Screens for acrylic bathtubs They have good resistance to moisture and also have a long shelf life. Experts recommend that you carefully study the instructions before installing such a protective panel. The instructions describe all the necessary installation details.