Facing wall panels moisture resistant under a brick. The use of wall panels under the brick. Rigid facing tiles "under the brick"

Natural materials were initially at the peak of popularity. However, their cost is not always affordable for the average consumer. Based on this, manufacturers began to produce artificial analogues, which in appearance do not differ at all from their prototypes. A striking example of such a policy was a brick-like wall panel. What it is? Rectangular structure with applied decorative ornamentation that faithfully imitates classic masonry.

Such material has the main advantage - an affordable price, but this is not all of its advantages. A wide choice of color design, embossed texture, a variety of shapes make it the most popular at the moment. It is worth noting that it is easy to install under a brick (see photo in the article). It can be used as a finishing material on almost any surface, since the weight of the product is quite small. And this allows you to significantly expand the scope of its application.

Panel types

This product is made of different materials, depending on this, it can be divided into two types:

PVC panels. During their production, polyvinyl chloride (a modern artificial material) and softeners are used. As a rule, at the initial stages, the panels are white. First, the product is given a textured pattern, then it is painted using a special technology.
Brick-like MDF wall panels differ in quality from the first type. They are much stronger and more reliable. They are made from wood shavings pressed under high pressure. Due to the influence of high temperatures, the material acquires excellent technical characteristics.

As a rule, such panels ultimately have a rectangular shape, their area is 3-8 square meters. m. The material is cut quite simply with a hacksaw or a jigsaw.

Features of MDF panels

If we compare artificial materials, then MDF is considered the highest quality. It is very often used to make exterior wall panels under a brick. It is resistant to sudden changes in temperature, high humidity, strong enough, not afraid of mechanical damage. It is these qualities that make it possible to use it for facing facades, balconies. However, this does not mean that it cannot be used indoors. This option is most suitable for the hallway and even the bathroom.

Thanks to the bright print, you can make a contrasting accent. Wall panels go well with other types of finishing materials, such as decorative plaster, wallpaper, paint. Installation is quick and easy, during their installation it is possible to completely avoid the formation of dust and dirt.

Features of PVC panels

Polyvinyl chloride has excellent technical characteristics. First of all, these are sound and heat insulation properties. Sheathing the walls with such material, you can forget about extraneous sounds coming from the street. PVC panels do not respond to temperature fluctuations, which will allow them to be used for outdoor decoration. They do not change their appearance when exposed to direct sunlight. Experts say that polyvinyl chloride is not harmful to human health, so recently such a brick-like wall panel for interior decoration has become widely used. It is quite easy to care for its surface, it is washed by any non-alkaline means. Because of this, many people use PVC panels in the kitchen, where dirt and grease constantly accumulate.

A huge selection of colors allows you to significantly transform the interior of the premises.

Advantages of wall panels

Studying this material, one cannot remain silent about its merits.

Consider the disadvantages of wall panels

It is immediately worth noting that brick wall panels have practically no disadvantages. And those that are, are significantly inferior to the merits.

So, what are the disadvantages of wall panels?

Low fire resistance. In no case is it recommended to subject this material to heat treatment, especially open flame.
If possible, avoid very severe damage, sometimes characteristic dents can form, especially for PVC panels.

Application area

As mentioned above, a brick-like wall panel can be used for both interior and exterior decoration. This material is great for facing unglazed balconies or loggias, as well as gazebos or terraces. The panels look quite organically on the facades of buildings, while not necessarily residential. They are often used for administrative and economic buildings.

Naturally, such a product looks great on the walls. Thanks to their original design, they are used in interiors decorated in different stylistic directions. But their scope does not end there. Light weight allows the panels to be used for decorating ceilings, making up unusual compositions.

wall panel cost

Several factors influence pricing:

The material from which the brick wall panel is made, for example, MDF, will be much more expensive than polyvinyl chloride.
Manufacturer. Well-known brands, as a rule, inflate the cost due to brand promotion.
Specifications. In the same samples, the price may vary depending on the thickness of the sheet.
Drawing an ornament, in particular, color design and complexity of the pattern.
The quality of the paints used to decorate the front part.

For comparison, we offer several options for pricing wall panels:

Production in Russia - 780 rubles, thickness 4 mm.
Malaysian production - 400 rubles per 1 sq. meter.
Made in the USA - 3 sq. m with a thickness of 6 mm will cost about 2000 rubles.

One of the varieties of current interior decoration are wall slabs that imitate brickwork. Most decorative panels for brick-like interior decoration have a two-layer structure. There are many options for such products, the inner side of which works simultaneously as a sound insulator and insulation. Plates not only look decorative, but are also practical and easy to care for.

Options for "brick" finishes

Brickwork is characteristic of the English classical and rural style. Also used in country, gothic, romanesque, loft style and some others. Imitation brickwork is combined with many interior materials, such as metal, wood, wallpaper, various paints and plasters.

When decorating all the walls of the room with pseudo-brick panels, the interior will create the atmosphere of an old castle, but such an environment will emotionally put pressure on people in the room. It is better to tile one wall with tiles. This will not overload the interior of a small room, provided that the tones are non-aggressive and the colors are soft shades.

It is important to organically fit the brickwork into the interior

Bright brick can only be used for a small fragment of the walls in order to focus on a specific area. Light, gray-white shades of brick slabs will organically fit into the interior, made in pastel colors, create a feeling of coolness and free space.

Panel types

All brick panels differ in the type of material and method of application. The most relevant options are MDF and PVC boards. MDF panels are used only for interior work, while the latter are used for all types of finishes.

For interior decoration, wood-based wall panels are more often used because they are more environmentally friendly. MDF panel has sufficient density and can be used in the form of hinged elements of cabinets, shelves, ceiling tiles.

MDF and PVC panels are installed most often

PVC slabs are more difficult to manufacture than MDF and may have a surface inlaid with artificial stone samples in a mosaic design. They are more expensive than conventional MDF panels, made using a fairly simple technology.

Brick-like wall panels for interior decoration are also made of other materials:

hardboard;
plywood.

They are used to a limited extent, depending on the humidity and temperature of the room.

Pros and cons of plastic boards

Advantages of using plastic panels:

Decorative plastic plates are very easy to attach, so their installation and repair can be done by hand. Due to the large area of the plates (from 3 to 8 square meters), the work will be completed promptly. Cutting can be done with a hacksaw for metal.
The panels have a long service life, which exceeds 10 years. They fit well on any basis, without requiring the cost of its preparation. They are light in weight, which makes them easy to work with.
Facing panels are easy to maintain. They do not require any restoration measures (for example, painting or plastering). They just need to be periodically cleaned of dirt with a soapy sponge.
PVC wall panels are versatile, suitable for exterior and interior walls, even used for ceilings.
With proper installation of plates, you can improve the thermal insulation and sound insulation of the walls of the house, as well as protect it from moisture penetration.

Decorative plastic plates will last more than 10 years

Disadvantages of using panels:

The material from which the decorative wall panels are made does not ignite, but is easily deformed by exposure to high temperatures. Therefore, products should be protected from fire and mounted away from stoves and fireplaces.
Imitation brickwork made of PVC has a low mechanical strength, which makes the appearance of dents and scratches inevitable.

Installation of plastic panels under the brick

Plastic boards are mainly glued directly to the surface of the walls. At the same time, minor irregularities do not affect the result of the work. The material has sufficient elasticity, which allows deviations when pasting the surface.

The significant curvature of the walls allows the installation of panels using a frame.

Installation is carried out either with the initial sheathing of the frame with plywood, or by reducing the pitch of the crate.

Decorative wall boards do not have sufficient strength to withstand the effects of mechanical stress, and plywood sheet provides them with some protection.

MDF panels

MDF boards can be installed in the bathroom and kitchen

Decorative MDF boards are obtained by chip pressing. Synthetic resins and a small amount of formaldehyde are used as a binder.

MDF wall panels are moisture resistant and can be used in rooms subject to constant moisture (in the kitchen and bathroom). Installation of plates is done in a frame way, it is simple and takes a minimum of time.

Panels are endowed with a number of advantages:

strength;
hygiene;
ease of care;
environmental friendliness;
practicality;
the ability to hang cabinets and shelves;
low price.

Imitation of brick allows you to significantly save on repairs

The building materials market is flooded with products of different quality and price categories. Often the imitation is so well done that it is not immediately distinguishable from the original. If natural materials are beyond income, you can safely pick up an affordable substitute for excellent quality and decorative properties.

Interior wall decoration with bricks is very popular and is used in various interior styles - country, loft, gothic, English style. Laying natural bricks requires professional skills; you can decorate the walls inside the room on your own using plastic panels for brick walls for interior decoration.

The use of panels that imitate brickwork allows you to introduce unique design ideas, the material goes well with other types of finishes, effectively hides the unevenness of the work surface.
The advantages of wall panels include such properties of decorative material as:

ease of installation work;
environmental and fire safety;
moisture resistance;
soundproofing properties;
resistance to temperature extremes, corrosion and ultraviolet;
ease of care;
durability;
affordable price.

Unlike natural brick, panels for interior decoration do not reduce space, do not weigh down the supporting structures.

Another plus of the building decorative material is maintainability, if it is necessary to replace one of the elements, it will not be necessary to dismantle the entire sheathing, it is enough to replace a separate section.

Types of brick panels for interior decoration

Today on the building materials market there are several types of materials for interior decoration under brick:

PVC panels;
MDF panels.

PVC panels

PVC panels are made from polyvinyl chloride with the addition of softening components. Brick-like wall panels are made using special molds, the production technology allows you to give the finishing material the required volume. Finished decorative elements are painted with resistant paints or pasted over with a film that imitates brick or natural stone.

Brick PVC wall panels are produced in several formats - in the form of rails, slabs or sheets. Standard dimensions of a sheet panel imitating brickwork:

length - 2.5-3 meters;

width - from 1 to one and a half meters;

thickness - from 0.8 to 1 meter.

Plastic panels in the form of rails are a hollow structure inside, reinforced with stiffeners. There are several options for the size of rack PVC panels on the construction market. The length of the decorative rail can be 3000, 4500 or 6000 mm, the width varies in the range of 100, 200 or 300 mm, the thickness of the rail can reach 50, 60, 80, 100 mm.

Application area:

wall cladding of residential and public buildings;
decorative finishing of utility rooms;
decoration of balconies, loggias, terraces;
facade work.

Brick-like pvc panels on the balcony

The main advantages of PVC wall panels:

realistic appearance;
a wide variety of shapes and colors;
light weight;
flexibility;
low cost.

MDF panels

Chipboard panels are widely used for exterior and interior wall cladding.

The MDF panel is based on pressed wood chips, modified resins with a minimum amount of formaldehyde act as a binder. The production technology consists in dry pressing of wood raw materials under high pressure.

MDF (Fibreboard) brick panels

MDF panels are characterized by higher quality and durability in comparison with PVC products, however, the cost of the material is correspondingly higher.

Advantages of MDF panels:

hygiene;
environmental Safety;
the ability to withstand additional loads (it is permissible to hang cabinets and shelves on a wall lined with MDF board);
acceptable price.

Mounting methods

Brick wall panels for interior decoration can be mounted in two ways:

on glue;
on the crate.

Do-it-yourself installation of panels on glue

This method is most often used for decorative wall decoration with PVC panels. Installation of facing material is carried out in several stages.

The first step is to prepare the work surface. Elements of the past finish, dust and dirt are removed from the walls.

If necessary, the walls to be finished are leveled with a plaster and putty mortar. After the plaster layer has dried, the surface is primed and dried.

The second stage is the installation of PVC plates. To perform installation work, you will need the following tools and materials:

jigsaw;
building level;
construction adhesive mixtures or liquid nails;
mortar for finishing seams.

Installation of the finishing material is carried out in the direction from the corner to the center. Fitting the finishing panels to the required size is carried out using a jigsaw.

When using a building mixture, the solution is applied to the wall, and not to the finishing material. Decorative panels "sit" on the solution. The correctness of fastening relative to the horizontal and vertical is checked using the building level.

When using "liquid nails", the fixing material is applied to the wrong side of the panel in a dotted or zigzag line. Next, the panel is pressed against the surface, torn off and pressed again for a few seconds, smoothed in the direction from the center to the edges. After the fragment has grabbed the wall, proceed to the installation of the next element. After complete drying, the seams between the individual elements are rubbed with a solution.

Installation of "brick" panels on the crate

The method of mounting decorative panels on the crate will allow you to hide engineering communications, this method is often used along with heat and sound insulation measures.

The technology of facing internal walls using lathing consists of two main stages:

creating a frame;
installation of decorative panels on the crate.

Wireframe creation

Advantages of the frame method

The method of attaching panels to the crate has a number of advantages:

the treated surface does not require special preparation;
a properly mounted frame will ensure the evenness of the walls;
ease of dismantling of decorative panels.

The disadvantages of this method include:

time and financial costs;
reduction in floor space.

Work procedure

Interior wall decoration with decorative brick panels is performed using tools such as:

roulette;
building level;
screwdriver;
electric jigsaw or hand saw;
construction stapler.

In addition to panels imitating brickwork, you will need:

self-tapping screws and dowel nails;
wooden or metal slats;
fasteners;
starting profile;
finishing profile;
Staples.

To create a base for decorative cladding, wooden planks with a cross section of at least 20x20 mm are used. The process of mounting a wooden crate is simpler compared to a metal counterpart, however, a frame made of wooden planks has its own characteristics:

a wooden frame is not advisable to use in rooms with high humidity;
wooden elements of the crate must be treated without fail with special antifungal compounds.

Installation of a wooden frame is carried out as follows:

first of all, wooden slats are attached to the floor and ceiling, after which they proceed to the installation of longitudinal racks in increments not exceeding 50 cm. holes I mark the wall. Further, holes are drilled in the wall and “nests” for fasteners are placed, vertical racks of the frame are mounted. At all stages of installation work, the quality of the installation is controlled using the building level. To improve sound and heat insulation, the space between the frame rails can be filled with insulation.

The process of creating a metal frame is close to the technology of erecting a wooden structure, the main difference is the use of a large number of hardware. The lathing is based on metal UD (narrow rails) and CD (wide) profiles. Initially, the guide racks are attached to the floor and ceiling, the rails are mounted parallel to each other. Then intermediate rails are installed in the following order: parallel lines are marked, providing for a step between vertical metal profiles within 50-70 cm. U-shaped fasteners are installed along the marking line, the number of fasteners is at least five pieces per vertical rack. A wall profile is inserted into the guide racks and rigidly fixed by means of U-samples.

Metal crate

Paneling frame

After the frame structure is made, you can proceed to the direct lining of the crate with decorative elements. First of all, the starting profile is attached to the rails of the frame structure using a construction stapler and metal brackets. Further, wall panels are mounted one after another, the elements are also fixed with a stapler and staples. After the installation of the penultimate decorative panel, the finishing profile is installed, the last plate is cut to the desired size and inserted into the finishing profile. The process of facing the internal walls is over!
In conclusion, we suggest watching a short video on the installation of plastic panels for brick walls:

The modern market is filled with a large number of decorative interior decoration. Facing panels made of different materials and imitating brick laying are especially popular.

All panels differ in the material of manufacture and method of operation. There are differences in the installation method. The most popular boards are made of MDF and PVC, interior decoration is carried out only using wooden types. PVC options are versatile and suitable for exterior walls. For cladding inside, MDF with an environmentally friendly base is most often preferred. It has a high density, the price is lower compared to PVC. Polyvinyl chloride decorative strips are more difficult to manufacture, but they perfectly imitate brickwork. There are also options with a mosaic surface and natural stone.

Facing panels are also made of other materials:

Their scope of use is limited, since the humidity of the air and other features of the room must be taken into account.

Brick-like PVC panels are less durable than MDF, but they are easier to install. This material is relatively fragile, therefore, if carelessly used, it is easily damaged. Facing perfectly copes with temperature changes, it is recommended for installation on walls in the bathroom and on the facade of the house. Decorative products made of MDF are capricious and sensitive to minor differences.

There are differences in the specifics of installation:

Rack. These are oblong-shaped boards with different widths. On both sides there is a groove for docking with the next plate.
Type-setting wall. They have a rectangular shape. If there is a drawing, it is much easier to select it.
Leaf decorative. From a technological point of view, the best.

Planks also differ in the specifics of their surface. There are options with imitation of modern brick, but flat. You can also buy relief types that perfectly repeat the old masonry.

Before buying, be sure to study the recommendations of the manufacturer. Some varieties involve only adhesive mounting or rack.

At temperatures from -50 to +50°С, they retain their operational external indicators. Some panels are allowed to be used in conditions up to +115°С.
The upper part has a decorative pattern. It is applied by printing: offset, thermal printing, lamination.
The drawing is protected by a protective varnish, the coating is matte or glossy.
The top layer is resistant to the negative effects of ultraviolet rays, ash, scratches, chemicals and other aggressive substances.
According to the standard, the length is 3000 mm, they are found with large dimensions.
Width - from 250 to 500 mm.
Thickness - up to 12 mm.

Pros and cons of such panels

Interior decoration made of panels made of MDF, PVC and other materials has a number of positive and negative sides.

1. Long service life. If the technology is followed, then the decorative wall panel will last up to 15 years. Throughout this period, it retains its original appearance.

2. Ideal for processing fireplaces, piers, columns, walls, podiums and other elements of the room.

3. A great opportunity to hide bumps and other flat defects. When mounted on a frame, all errors are hidden. This technology eliminates the need to apply a leveling plaster layer vertically.

4. The minimum weight of the cladding eliminates the load on the supporting structures. Due to this, installation on plasterboard partitions is allowed. Plastic panels are relatively thin, so they can be cut with a stationery sharp knife.

5. Relatively simple installation that does not require significant knowledge and special equipment. If necessary, they can be disassembled.

6. Easy maintenance. Interior finishes are easy to keep clean. Decorative brick-like panels made of plastic cope with negative external influences: fungus, mold, high humidity. Any dirt and dust is simply removed from the wall by wet cleaning.

7. Wide choice of textures, colors and designs.

8. Ideally combined with other materials and technologies. Due to this, the room can bring some zest.

9. High practicability allows you to use the panels on the inside of bars, cafes, restaurants, shops, offices, hotels.

10. No need to paint.

11. After a while, it does not turn yellow and does not change its technical characteristics.

12. Under the influence of ultraviolet radiation does not emit toxic substances. Belongs to the category of environmentally friendly materials.

13. High resistance to moisture. Ideal for rooms with high levels of humidity.

14. Does not burn in direct contact with fire. Due to the high density, the plastic melts.

Cons of wall panels imitating brick laying:

With inaccurate operation, it is easy to deform under the influence of mechanical load or unevenness of the base base.
The likelihood of scratches.
In the void between the wall and the cladding, rodents can start up, dust can accumulate, and so on.

There are two ways to attach the cladding:

The first is correct only when using a plastic finish. The whole process consists of several successive stages. First of all, the surface is qualitatively prepared and cleaned, it should be carefully leveled. After that, the wall is primed to remove dust from it and increase the quality of adhesion.

You can start the gluing process after the leveling and primer layers have dried. For work you will need to prepare:

Sharp utility knife.
Jigsaw.
Adhesive mixture or liquid nails.
Level.

Installation starts from the corner. Each panel must match the next in the drawing. If liquid nails are used, then the glue is applied to the finish in dots or lines (zigzag). After that, the lining is gently pressed against the wall.

Another way simplifies the preparatory work, for this a crate is installed. Engineering communications can pass under it. If electrical wires are laid, they must be in a protective sleeve. The void between the racks of the frame is filled with heat-insulating or sound-proofing material, mineral wool is suitable. After that, the panels are fixed. It is important to follow the pattern so that a beautiful brickwork is formed.

Before glue, this technology has its advantages:

No need to prepare the surface, the frame will hide all the bumps.
It is easy to achieve perfectly smooth walls.
Simple and fast installation.

If you hurry, the crate will turn out to be a curve, and after installing the panels, these irregularities will be emphasized. The useful area of the room is reduced by the width of the frame. In some cases, it is incorrect to carry out such internal work due to the lack of square centimeters. You can use special clamps or other fixatives.

The table shows approximate prices in the territory of the Russian Federation:

Options for interior wall decoration with decorative brick panels

Options for "brick" finishes

It is important to organically fit the brickwork into the interior

Panel types

MDF and PVC panels are installed most often

Brick-like wall panels for interior decoration are also made of other materials:

They are used to a limited extent, depending on the humidity and temperature of the room.

Pros and cons of plastic boards

Advantages of using plastic panels:

Decorative plastic plates are very easy to attach, so their installation and repair can be done by hand. Due to the large area of the plates (from 3 to 8 square meters), the work will be completed promptly. Cutting can be done with a hacksaw for metal.
The panels have a long service life, which exceeds 10 years. They fit well on any basis, without requiring the cost of its preparation. They are light in weight, which makes them easy to work with.
Facing panels are easy to maintain. They do not require any restoration measures (for example, painting or plastering). They just need to be periodically cleaned of dirt with a soapy sponge.
PVC wall panels are versatile, suitable for exterior and interior walls, even used for ceilings.
With proper installation of plates, you can improve the thermal insulation and sound insulation of the walls of the house, as well as protect it from moisture penetration.

Decorative plastic plates will last more than 10 years

Disadvantages of using panels:

The material from which the decorative wall panels are made does not ignite, but is easily deformed by exposure to high temperatures. Therefore, products should be protected from fire and mounted away from stoves and fireplaces.
Imitation brickwork made of PVC has a low mechanical strength, which makes the appearance of dents and scratches inevitable.

Installation of plastic panels under the brick

The significant curvature of the walls allows the installation of panels using a frame.

Installation is carried out either with the initial sheathing of the frame with plywood, or by reducing the pitch of the crate.

Decorative wall boards do not have sufficient strength to withstand the effects of mechanical stress, and plywood sheet provides them with some protection.

Preparation for the installation of PVC plates begins with the installation of the frame.

Plates are attached to the frame

Required materials and tools:

plumb line or thread;
slats for a frame made of metal or wood;
perforator;
start and finish profiles;
metal staples;
special stapler;
screws, dowels.

After preparing everything you need, proceed to the horizontal installation of the rails.

The installation process begins with the top rail. After its installation, using a plumb line, the place of attachment of the lower rail is determined. At the end, middle rails are mounted. The frame is ready.

Using a stapler, a starting profile is attached to the rails. PVC boards are successively installed on the wall.

When the penultimate slab remains, attach the finishing profile.

The last plate after fitting is inserted into place without fastening.

MDF panels

Decorative MDF boards are obtained by chip pressing. Synthetic resins and a small amount of formaldehyde are used as a binder.

Panels are endowed with a number of advantages:

strength;
hygiene;
ease of care;
environmental friendliness;
practicality;
the ability to hang cabinets and shelves;
low price.

Imitation of brick allows you to significantly save on repairs

Brick MDF panels: pros and cons

Decorating a room with natural materials has always been popular, but its price is not affordable for everyone. Based on this, most manufacturers began to produce artificial versions that outwardly practically do not differ from the original samples. An example in this matter was the decoration of a room under a brick.

Today, it is not difficult to purchase MDF panels, and a believable imitation of classic masonry will become a highlight in the interior.

MDF panels can boast of their main advantage - a pleasant cost, but that's not all. The positive qualities include a large selection of shades, relief structures, various shapes. This is what makes this material so popular. As for such brick-like panels, it should immediately be noted that their installation is very simple. In addition, you can use this material for decoration almost everywhere, as it weighs a little. All these qualities make it possible to expand the scope of use.

The product itself can be made of various materials, based on this they are divided into two types.

PVC. They include polyvinyl chloride, which is classified as artificial materials. Initially, the material receives only white color and only then it is dyed.
Panels made under the brick. Such material is immediately distinguished by its appearance, in addition, it has increased reliability and durability. Panels of this type are made using wood chips and high pressure. It is due to the fact that the material is affected by pressure and temperature, it acquires excellent technical qualities.

As a result, during the production process, panels with a rectangular shape and an area of 3-8 m2 are obtained. At the end, the resulting plates are cut with a jigsaw or hacksaw and delivered to stores in this form.

The panel is a good solution, since as a finish it can hide uneven walls, and, if necessary, hide prominent communications and decorate niches.

Modern designers, using such a skin, began to create various decorative elements. Thus, today two-level floors are decorated with brick-like MDF panels, columns are visualized or “torn” surfaces are made.

That is, there are a lot of options in which you can use a brick panel. Therefore, it is not difficult to make a beautiful and exclusive interior, and the work can become very interesting.

Peculiarities

If we take all kinds of artificial finishing materials for comparison, then MDF will be the highest quality among them. Manufactured exterior walls under the brick will be more resistant to various external factors and influences.

It is for this reason that MDF is used for finishing:

But this does not mean that MDF cannot be used indoors. This material is ideal for finishing kitchens, hallways and even bathrooms. In the kitchen and in the hallway, it is easy to remove grease and dirt from it, and in the bathroom it will not deteriorate from constant humidity.

Advantages and disadvantages

If you read this material in more detail, you can not help but notice its advantages.

They include many qualities.

Easy installation. The work of installing the material can be done by yourself, even if you do not have the skills or knowledge. You just need to get acquainted with the technology, and you can safely do the work.
Brick wall panels weigh a little. For this reason, they can be revetted with any surface.
The mount does not require preparatory work to level the base. Therefore, there is also a saving of money and time.
The panels have a long service life. With proper care, they will serve the user for more than 10 years. During operation, cracks or chips will not appear on them. In addition, their appearance does not need to be updated.
They are universal. For this reason, they can be used on any surface, even for exterior cladding.
Since the panels can be partially reconstructed, it is possible to replace a single sheet without removing the others.

That is, MDF panels have a lot of positive qualities, but as for the negative sides, it should immediately be said that there are few of them.

However, it is important to be aware of these disadvantages.

The panels have a low level of fire resistance. In no case should this material be near an open fire, and it should not be subjected to heat treatment either.
During operation, damage must be avoided. A strong impact may leave an indentation on the material.

Otherwise, there is no reason to deny yourself the pleasure of making the design original with the help of brick-like panels.

MDF in the interior

Brick will look appropriate in a variety of interiors. The design is typical for rural areas and for some classical ones.

For example, these could be styles:

The wall cannot be left without decoration, because it plays not only the role of decoration, but also heat and sound insulation.

Not so long ago, the building materials market could only offer wallpaper with a brick pattern, but they did not bring the necessary realism to the interior. Today, the range has been expanded, materials are able to imitate texture and texture.

As for the designers, they thought through the possibilities of decorating such brickwork to the smallest detail.

Brickwork will be appropriate if there are more than two rooms in the living room. This is due to the fact that, despite the fact that the interior will be cozy and resemble an old castle, it will be inconvenient to be constantly in such a space. A modern resident is not used to such decorations, so he will be under pressure and the impression of a lack of comfort is created.
In order for the interior not to be overloaded, paneling is best done on one specific wall. This solution is also suitable for one-room apartments, but it is advisable to choose a softer shade. Avoid aggressive styling.

If you need to decorate only a specific part of the wall, you can use bricks with bright colors. This will highlight a specific area. But you should not decorate a fireplace with this material, since the presence of an open flame can lead to a fire.
The use of red brick in a living space is not recommended, it is better to use it in restaurants or clubs. At home, this color eliminates the calm and emotional atmosphere.
If you want a calm, unconstrained atmosphere, white or light gray bricks are the best choice. This design can be entered into a pastel interior. However, one should take into account the possible "chill", so it is advisable to dilute such an environment with something.

There are enough finishing options. They depend only on the size of the room, the lighting in it and, of course, on the wishes of the owner. But with all the positive qualities, one should not forget that in some cases this design will be inappropriate.

Application

So, panels can be used not only for interior, but also for exterior decoration. This material has successfully proven itself in the design of unglazed balconies and loggias. And also it can be used for facing terraces and arbors. Organically, such material will look on the facade of the building, while it does not have to be residential.

Of course, there is no doubt that this product will look perfect on the wall in an original home interior, which is decorated in a certain stylistic direction. But the scope of their use does not end there. Due to their light weight, the panels can even be installed on the ceiling, resulting in an interesting and unusual composition.

How to glue MDF panels, see the following video.

Brick panel for interior wall decoration, their types and features

Innovative finishing material for residential private houses and city apartments, as well as for entertainment premises from the inside, are slabs with imitation of brick aesthetics. This design is relevant in the interiors of the loft style, hi-tech, pop art, fusion of others. Let's talk further about the operational parameters of brick-like panels for interior wall decoration, which have been so popular in recent years.

Advantages and disadvantages

Decorative brick wall panels are a universal finishing material for interior decoration of walls, piers, podiums, fireplaces, columns and so on. Such boards (PVC, MDF and others) have a large number of advantages that are appreciated by a large number of buyers. Let's talk about them in more detail:

long service life - a design of this kind, subject to proper installation, can last up to 15 years without losing its beauty and basic properties;
the ability to hide surface irregularities, communication systems, which is very valuable when finishing old buildings, as well as walls with significant level differences from the vertical;
light weight, small thickness, easy to cut with a clerical knife, which makes it possible to use this material for finishing not only concrete walls, but also plasterboard partitions. Such plates are characterized by a fairly easy installation and dismantling procedure if necessary;
high practicality, undemanding maintenance. Plates have an increased level of resistance to negative factors: increased levels of humidity, scratches, fungus, mold, dirt, dust;
diverse design, many color shades, interesting texture, do not require finishing coloring. All this allows the panels to be used in residential premises, living rooms, offices, cafes, bars and restaurants. They miraculously combine with other finishing materials, allowing you to bring notes of solemnity and respectability into the room.

The disadvantage of PVC brick panels for walls inside a dwelling is the risk of their deformation after installation. Such situations can occur if the wall had very impressive irregularities or defects (cracks, large dents), which it was not possible to eliminate before finishing. Also, damage to the coating is possible if the finish has been subjected to a significant mechanical impact (strong blow, scratch, and so on).

Types of brick panels for interior wall decoration

Today, manufacturers have significantly expanded the choice of brick-like panels, which are used for interior decoration of the wall surface of residential premises. There were plates of different textures, colors, sizes. This allows interior designers to bring to life the most original ideas, show imagination, as well as apply non-standard solutions and techniques for wall decoration.

Let's describe the most popular types of PVC panels with an imitation of the external aesthetics of a brick. According to the base material in the manufacturing process, there are:

PVC - for their manufacture, polyvinyl chloride is used in combination with special softeners. This is a safe, lightweight material, the installation of which is very easy to implement and is carried out on a special adhesive composition. Wall plates of this type are important to use for finishing walls, ceilings;
Brick MDF - are created on the basis of environmentally friendly and safe for human health wood chips, which provides the material with high performance parameters: sound and heat insulation properties, wear resistance, durability. Decorative MDF products are most relevant for use in residential areas.

MDF
PVC

You can also find panels made of chipboard, hardboard, gypsum, plywood. These are cheaper options, but the operational parameters of such products are somewhat inferior to PVC and MDF. For example, the aesthetics of some do not imitate the surface of a brick brightly enough, while other types are not resistant to moisture or mechanical stress.

According to the specifics of installation, they distinguish:

rack products are oblong boards of different widths, which have a groove on one side for inserting a subsequent plate;
stacked wall slabs for interior decoration of rectangular walls, which simplifies the process of selecting a pattern;
decorative sheet panels under a brick differ in the highest level of manufacturability.

According to the specifics of the surface, you can find:

flat facing material with imitation of modern brick;
embossed panels for the wall surface, imitating antique bricks.

Before acquiring a specific look, carefully study the manufacturer's recommendations for its installation, the clamps used for this purpose (adhesive composition, hardware, staples, and so on), as well as the current operating conditions of the coating. Then the finish will last much longer.

Which is better to choose

The choice of slabs for interior decoration of a wall surface is quite wide today, so it is quite difficult to instantly navigate the relevance of using one or another type. Many interior slabs have specific properties that limit the scope of a particular type.

Let's take an interest in the opinion of experienced specialists on this matter, and they state the following:

rack plates are relevant in small rooms, as they are mounted horizontally. Such an arrangement of plates visually allows you to achieve the effect of expanding a narrow space. At the same time, inlaid wall slabs have a square shape, so they are relevant in the case when you want to reproduce the original geometric pattern on the basis. The sheet view of such material is quite large in scale, so it is used in the case of a spacious room and a base without ledges and niches;
MDF products for decorating bathrooms, saunas or terraces with a pool are not suitable, since wood is the basis for the manufacture of such material. The plate will simply dry out under the influence of an increased level of moisture. Does not tolerate MDF and prolonged exposure to sunlight, as a result of which the surface with such a finish may brighten over time. Plastic plates for decorating the wall surface of a living space from the inside are more practical and resistant to moisture, so they can be used in kitchens and bathrooms;
speaking about a specific manufacturer, we note the following: it is worth giving preference to trusted brands that accompany their products with quality certificates. This is an additional guarantee of high performance finishes.

Dimensions

To decorate residential interiors today, you can choose panels of different sizes with an imitation of brick aesthetics. Larger options work faster. In addition, when using such products, you can get fewer joints, because they allow you to cover a large area of \u200b\u200bthe base in one. As a result, the interior design is more concise and attractive.

Brick-like MDF panels: examples of interior design

Brickwork came into fashion in interior design a few years ago. Loft, hi-tech, minimalism styles introduced raw structural elements into the interior decoration: concrete, metal and brick. The use of natural brickwork in apartments is not always appropriate due to the large weight of the material and the high cost of such work. A more affordable alternative to creating a stylish interior are MDF wall panels. This article will tell you about the advantages of this convenient decor and how to use it.

Peculiarities

MDF panels occupy a leading position in the building materials market due to their valuable qualities:

The material is environmentally friendly. The composition of MDF includes natural and safe for human health fine-dispersion chips and carbide resins.
The laminating film protects the surface from mechanical influences and has a rich palette of colors.
It is easy to take care of the panels, it is enough to wipe them with a damp cloth, and if necessary, they can be washed with any detergent.

The panels are easy to install, a small amount of construction debris is generated during installation, and the process itself takes a little time and does not require special building skills.
MDF boards can be mounted on glue and on a crate of bars. Fastening the panels to the frame allows you to hide the unevenness of the walls and hide the electrical wiring behind the sheathing.
Moisture-resistant MDF panels can be used for interior decoration of bathrooms, loggias, country houses and kitchens.

The disadvantage is the high combustibility of the material, so its close "neighborhood" with a fireplace, stove, gas stove or electric heater is undesirable.

Brick-like wall panels are represented by a wide variety of textures and colors. You can easily choose the brick layout scheme that suits you. The pattern of the laminated coating can imitate single-row, multi-row, radius masonry, as well as wickerwork, bricks laid in a herringbone or checkerboard pattern.

Jointing gives the masonry an additional decorative effect due to a contrasting or nuanced color, smoothness or deliberate unevenness of the seam. The body of a brick either protrudes in relief above the level of the slab or has a planar image. The surface can be smooth or rough ("chipped" brick). The hue can be reddish, yellow, gray or any other.

Brickwork in different styles

Brickwork can be present in the interior in various versions. A common technique is when the whole house or apartment is finished with brick-like MDF panels in natural colors. This finishing option requires large spaces and high ceilings. The color of natural brick can vary from red to gray to almost black. The richness of color transitions gives volume to the walls, which, with a bright finish, become an even more significant element of the room.

This type of finish will be the best choice for interior design in style. loft. The beauty of natural stone, changed from time to time, becomes the main decoration of the home. Furniture is usually selected in a single color (white, black, gray, blue, green). The variegation of the walls should be offset by a calm environment. The white ceiling brings order to the atmosphere and visually increases the height of the room.

In Scandinavian interiors the walls are painted white. Almost black ceiling beams, doorways and skirting boards give the space a clear geometry. The monotony of a brick wall is effectively broken by a special spotlight. Both for interiors in the loft style and for the Scandinavian style, MDF panels with embossed brickwork are better suited.

Old table from the USSR - we restore with our own hands and save money

Brick is considered one of the traditional finishing materials. It differs in environmental friendliness, durability, durability, solid appearance. However, brick has always been distinguished by a high price, so not everyone can afford such a finish. Brick-like decorative panels are one of the great alternatives. Read about the pros and cons of such a cladding in this article.

Peculiarities

Polyvinyl chloride is a popular material used today in many industries, including the construction industry. PVC panels with imitation brickwork have gained wide popularity and numerous positive consumer reviews. Firstly, this is due to the excellent aesthetic qualities of the material. Secondly, such panels are incredibly functional and practical.

Many have already become accustomed to the plastic lining of the interior. This trend has appeared relatively recently, but building materials of this type are already recognized as one of the best on the market. PVC panels are ideal for those who want to create a beautiful interior, but are on a budget.

PVC panels are produced with the addition of special softening components using molds, which allows you to exactly repeat the texture of the brick and give the product a natural volume. After that, they are subject to painting or gluing with a special film imitating the color of a brick.

The following types of material are on sale:

rack;
plates;
leafy.

Vinyl panels are considered affordable and easy to use. They are safe, resistant to damage, not subject to peeling and flaking. Cheap varieties of material have a uniform, smooth surface. More expensive options have a very interesting "brick" texture.

PVC panels have excellent performance properties, sufficient strength and long service life. Unlike real brick, such panels delight with an abundance of shades. If desired, you can choose the material in natural colors, but contrasting colors look no less beautiful in the interior.

It is worth noting that most manufacturers of PVC panels carefully work out the relief so that it is as similar as possible to the varieties of brick that exist today.

Today on sale you can find a variety of options for imitation of brickwork. These are products of natural light and dark tones, the image of aged materials, fashionable white, black "bricks" and much more. A variety of color schemes allows you to choose an option that fits perfectly into any interior.

Polyvinyl chloride - a modern unique material, resistant to damp and aggressive environments, so these panels can be used even when facing the bathroom, hallway and kitchen. They are also sometimes used as a material for facade decoration. There are one- and two-layer (based on polystyrene foam) products.

Brick-like panels are sometimes used to hide wall defects. In this case, installation is carried out using frame technology, when a crate is installed before the direct laying of the “brick” or the wall is sheathed with plywood. This allows you to slightly strengthen the skin, since PVC is a fairly soft material that can be easily deformed.

Usually the panels are installed with glue. At the same time, the presence of small irregularities on the wall is not an obstacle to high-quality laying of the material. When cladding, minor deviations are allowed, and curvature, on the contrary, can give naturalness to the cladding.

Thus, the scope of panels includes:

facing of internal walls of residential and public buildings;
decorative finishing of interiors;
finishing of terraces, loggias, balconies;
facade decoration (in some cases).

Although these materials are in the affordable price category, some of them are expensive.

Several factors influence pricing.

Manufacturer brand. The price of products of famous brands is overestimated due to the popularity of the company.
Specifications. Thicker and thicker products cost a little more.
Design. The cost can be affected by color, the complexity of the pattern, the quality of the paints used.

Advantages and disadvantages

PVC panels are a unique finishing material that can be used both for wall cladding and for decorating podiums, columns, piers. For several years they have been on the lists of top sellers, and all because they have an impressive list of advantages.

There are seven reasons why you should pay attention to PVC decorative panels.

Durability. Manufacturers have managed to achieve a long service life of products. Modern options are able to maintain their performance up to 15 years.
Decorative Features. In addition to a flawless imitation of the texture of natural material, the panels are able to well hide the unevenness and defects of the walls, as well as elements of communication systems.
Ease of installation. The panels are easily cut with a regular clerical knife, which allows you to customize products to the desired size. In addition, they are lightweight, so they are suitable for facing weak structures.

Practicality. Products are unpretentious in care, resistant to most external negative factors (such as humidity, mold, pollution, dust, fungus).
Design. Realistic texture and wide color palette make it possible to use the panels in the interiors of houses, apartments, offices, cafes, hotels. They are in perfect harmony with other finishing materials and do not need finishing painting.
PVC panels do not visually weigh down and do not reduce space.
maintainability. If necessary, an unusable cladding element can be easily replaced without dismantling the entire leaf.

Like any other material, PVC panels have several disadvantages. The cladding made with panels has sufficient strength. However, with careless handling, the material is easily scratched or broken. In addition, some types of panels do not tolerate low temperatures. That is why they are not recommended for use as facade cladding, although it is allowed to lay products in unheated buildings.

Among the shortcomings, low resistance to fire can also be noted: PVC bricks do not ignite, but under the influence of high temperature they quickly deform. Therefore, they are not used to decorate fireplaces and stoves.

Installation nuances

PVC boards are easy to install, but if you want to create the perfect decorative wall, you should not forget about the key rules of the process.

Before proceeding with the installation of panels, preparatory work should be carried out:

the walls are cleaned of traces of the previous finish;
remove all contaminants;
seal cracks and repair damaged areas;
if the surface is severely deformed, it must be leveled.

There are two ways to mount these products:

gluing;
fixing on the crate.

In the first case, high-quality adhesives are used that are designed to work with PVC. When choosing an adhesive, it is worth considering its purpose, composition and thickness of the plates.

Glue is usually used when laying on flat surfaces. The crate is installed in cases where the walls are too deformed, and there is no way to level them. There is a second reason - the presence of the crate makes the lining more durable and protects it from the appearance of dents and deflections.

How to glue?

As already mentioned, first you should prepare the wall, clean it of unnecessary details, old whitewash or cladding, get rid of dust and grease.

The first stage of work - primer necessary to protect the surface from mold and moisture. It also promotes better adhesion to the base. Complete drying of the primer occurs within 6-12 hours.

It is worth noting that the process of gluing panels only at first glance seems easy. In fact, it requires special skill and accuracy.

You will need:

construction pistol;
sponge;
mineral solvent to remove excess glue (you can use water);
sealant.

It is better to work with liquid nails with a construction gun. To do this, cut off the tip from the packaging and screw on the cap, after cutting it off. Insert it into the connector of the construction gun.