When ordering a cut from 10 sheets, we give a discount of 3% on the material

Sawing and cutting chipboard and chipboard

Chipboards - conventional and laminated - are widely used in construction and interior decoration, in the manufacture of furniture and other products. Parts and blanks made of chipboard and laminated chipboard are in demand not only in mass production, they are often used for the independent manufacture of furniture and interior elements. This saves money and allows you to make products to your taste.

Before proceeding with the manufacture of furniture, it is required to cut the material. With a small amount of work, this does not take much time and effort and can be done at home. But to cut a large number of plates will have to work hard. In addition, independent sawing of chipboard can spoil the material - a violation of chipboard cutting technology and the use of non-professional tools leads to chips, cracks and scuffs of the laminated coating.

The best option is to order chipboard cutting in a specialized company equipped with professional equipment. In this case, you will get parts of precisely defined shapes and sizes with clear and even edges.

Sawing chipboard at All-fanera

All-fanera is ready to perform chipboard sawing work using our own boards or customer materials. Our range of services includes:

• according to the size of the customer;
• hole insertion;
• PVC edging;
• production of blanks with internal and external bending with a radius of up to 60 centimeters;
• execution of beveled parts;
• cutting and cutting plates at an angle in thickness from 0 to 45 °.

Thanks to the use of modern machines, we can produce:

• blanks for cabinet furniture;
• details for the kitchen interior;
• blanks for other furnishings.

Our equipment allows us to produce products with flawlessly smooth and clear edges. In our work, we use only high-quality and sharp saws, thanks to which the edge of finished products does not crumble, and burrs do not appear on the laminated layer.

When processing board materials, it is important to observe the exact dimensions of the parts specified by the customer. To do this, the sheets are cut according to pre-prepared computer templates. This approach allows:

• correctly arrange the details on a sheet of chipboard;
• get blanks with the most accurate dimensions and angles;
• minimize material waste;
• reduce the time of work.

Advantages of All-fanera

Since 1994, All-fanera has been cutting chipboard in Moscow. During this time, our specialists have gained extensive experience in sawmilling, which allows us to cope with orders of the highest complexity. Our clients receive:

• profitable
• work with the use of computer maps and secondary control of technical specifications;
• high-quality processing of materials - finished parts have a smooth, non-crumbling edge without chips and scuffs;
• packaging of finished products (optional);
• prompt shipment of parts and blanks.

How to order cutting of laminated chipboard in Moscow at All-fanera

To place an order, you must fill out the form, indicating the thickness and color of the material. For more information, call +7 (495) 626–95–51, +7 (495) 626–99–95, +7 (903) 589–02–89 or contact the order office located at: Moscow, Leningradskoe shosse, 63 (metro station Rechnoy vokzal or metro station Belomorskaya).

HOW TO ORDER LDSP

Do you need to cut chipboard? We will do it efficiently and quickly!

Our company provides the following services:

• cutting, dissolution, cutting
• milling chipboard;
• drilling parts;
• production of grooves and bevels.

Equipment for cutting chipboard

The used equipment of the HOMAG GROUP company is high-precision, high-performance and has modern software management.

Advantages of this equipment: high productivity, manufactured parts do not have chips, their dimensions and angles are made with exact observance of dimensions (minimum cutting error).

Additional functions of the equipment: gluing quick-release labels on each part.

Dimensions of initial sheets and final parts of laminated chipboard

• original sheet thickness: 0.5-100 mm.
• cutting error: ±0.5-2mm(depending on equipment).
• maximum size of the manufactured part: 2770x2040 mm.
• minimum size of the manufactured part: 50x50mm.

Minimum radii for edging:

• chipboard16 mm:
  • external not less than 50 mm;
  • domestic at least 80-100 mm.
• chipboard25 mm:
• external at least 100 mm;
• domestic at least 80-150 mm.

Price for cutting chipboard

Minimum cost cutting services - 3000 rubles + material cost.

*prices are indicative for a volume of more than 1200 rm, the prices for sawing, depending on the complexity of the order, can be changed

Cost of the order (calculation of the manufacture of chipboard according to the size of the customer)

Note! We cut laminated chipboard only under the trademarks Egger, Kronostar and Kronospan.

To receive an offer from us regarding the possibility and cost of an order, follow these steps:

Order execution time

Note! We calculate the cut only on weekdays! The term for calculating the cost of the order is from 1 to 3 working days.
The production time for chipboard parts is 3-8 business days from the moment the customer makes the payment.
Due to the seasonal workload of production, an increase in terms is possible. Check with the manager for the actual terms of order execution.
Expedited order execution is possible. In this case, the surcharge on the cost of the order for urgency is 10-30% ( but not less than 3000 rubles)

Where is the production of laminated chipboard to order?

Production of orders is carried out in our workshops on the territory of warehouses located.

So, I collected a sufficient amount of material and decided to dash off another analytical note. This time the theme is sawing chipboard without chips.

There is a fairly fair opinion that it is possible to cleanly cut chipboard only on professional equipment (that is, a panel saw).

The whole highlight of this machine is that it has two saw blades located strictly on the same axis. The first cuts the chipboard, the second cuts it through.

The cost of this unit is about 700,000 - 1,000,000 rubles (of course, there are more expensive))). NOT VERY ACCEPTABLE FOR THE AMATEUR.

Not a bad way to trim incorrectly marked parts, but you can’t cut the whole cabinet in this way. Chips, of course, are present, but in an amount that is quite comparable with the formatter (it also, in secret, leaves a small number of small chips). A lot of hassle with markup. Only straight cuts can be made.

Method 5 - Fraser

Provides the cleanest edge of the workpiece; the quality is no different from the formatter, often even better.

With it, we first saw the workpiece with a jigsaw, departing from the marking line 2-3 mm, and then align the line according to the template (I usually use the second piece of chipboard, sawn on a formatter, of a suitable size). should be copy, that is, with a bearing.
Very clean cut. The possibility of carrying out curvilinear cuts, that is, the manufacture of many, including several completely identical ones. Cons - a lot of trouble: the need for accurate marking, preliminary sawing of blanks, setting a template or tire under the router, that is, not very suitable for mass use.

For many years we have been engaged in the production and manufacture of cabinet furniture, and over the years of cooperation with various customers we have gained excellent experience. Contacting us is a guarantee of quality work in the shortest possible time!

Edging laminated chipboard

We carry out edging of parts made of chipboard and laminated chipboard with both a thin PVC edge - 0.4 mm, and a PVC edge of 2 mm.

Edgebanding cost:

• PVC edges 0.4 mm thick — 40 rub / l.m
• PVC edges 2 mm thick — 80 rub / l.m

We carry out edging of radius and curvilinear parts. For availability and cost, check with the managers of the company. You have the opportunity to send a request by mail on the site and our manager will contact you as soon as possible.

Edging is an important step in the furniture manufacturing process. It involves applying a furniture edge to the end of parts made of chipboard / chipboard. It allows you to protect the item from various mechanical damage, increasing the life of the furniture. In addition, furniture with an edge looks neater and fits better into the interior. A high-quality glued edge also ensures the moisture resistance of the part, but for this it needs to be applied by professionals using special equipment.

To get detailed advice on these and our other services, just call or write and the consultants will answer any question.

We carry out:

• Saw chipboard
• Sawing MDF
• sawing plywood
• Cutting fiberboard panels
• Cutting HDF
• Cutting panels finished with plastic
• Sawing veneer panels
• Cutting plastic
• Sawing Plexiglas
• Cutting facade panels
• Sawing tabletops
• Sawing panels postforming
• Production of multi-saw parts from chipboard and MDF.

  All of the above materials are guaranteed to be sawn without chips and disruptions. When cutting, an automatic cutting center Holzma (Germany) and a panel saw Feeder Capa 450 (Austria) are used. When ordering, a cutting map is drawn up for the best distribution of parts on the sheet, in order to obtain a minimum percentage of lunges. To speed up the cutting process, there is the possibility of batch cutting. We cut parts both from our own material and from the material of the customer. Always in stock 12 colors of high quality laminated chipboard: White Vanilla Gray Metallic Black Wenge Walnut Eco Alder Plank Cherry Portofino Cherry Beech Whitewashed Oak According to individual orders we produce multi-blade parts, panels with a groove.

  • Order production time is 5-7 business days.
  • Rush orders are processed within 3-4 business days.

  * We carry out free storage of the manufactured order for no more than 3 calendar days. In case of untimely export of the order, storage is paid separately at the rate of 1 pallet - 100 rubles per day.
  **Finished orders are stored on a euro pallet. When loading an order together with a euro pallet, the customer pays a deposit value of the pallet at the rate of 250 rubles.
  *** Packing of the order is paid separately, according to the prices given in the table. Loading the order into the body of the customer's car is carried out using a forklift.

  
  Cutting chipboard in Moscow is one of the main directions of our company. In addition, in the company "RASPILPODOLSK" you can order cutting MDF, plywood, fiberboard, HDF, plastic, plexiglass, countertops, postforming panels.

  Benefits of ordering sawn chipboard in the company "RASPILPODOLSK"

  High-quality chipboard cutting. We use the German cutting center Holzma and the Austrian cutting machine Feeder Capa 450. High-quality equipment, which has long established itself in the market, allows us to guarantee that the cut will be carried out without chips and cracks, with the highest possible accuracy (0.3 mm). The panels are loaded automatically, which eliminates the human factor and, therefore, reduces the likelihood of defects to zero;

  Sale of laminated chipboard with sawing in Moscow. We offer cutting materials of the customer and our own. We always have 12 colors of laminated chipboard from SWISS KRONO in stock. We work with this manufacturer, as we have seen from experience that it is he who offers the best material. For the manufacture of laminated chipboard, he uses only the best raw materials, which are absolutely safe for humans. When cutting laminated chipboard from SWISS KRONO, there are no difficulties, the edges are smooth and neat;

  Cutting chipboard into complex shapes. The Feeder Capa 450 cutting machine makes it possible to cut out not only standard square and rectangular shapes from chipboard, but also a triangle, hexagon, trapezoid, etc .;

  Urgent cutting of chipboard. Machines allow batch cutting, which greatly speeds up the work. If you need urgent cutting of laminated chipboard in Moscow, please contact us! The standard order fulfillment time is 5-7 business days, and the urgent order is 3-4 days;

  Rational consumption of material. Before cutting, a cutting map is drawn up, where the placement of parts on the sheet is optimized, thanks to this, the amount of waste is minimized, or it does not remain at all;

  Cutting chipboard at a low price, which allows you to reduce your costs for preparing material for further processing. Savings on this service allow furniture manufacturers to reduce their costs and increase profits.

  Sawing laminated chipboard according to the size of the customer (Moscow and Moscow region)

  Cutting laminated chipboard is an important stage in the production of furniture. This process cannot be called simple, for its use you definitely need high-quality equipment, manual sawing will lead to cracks and chips.

  Looking for where to cut chipboard to your own dimensions? Contact our company "RASPILPODOLSK".

  Also in our company you can buy laminated chipboard with a cut in Moscow. Ready-made high-quality elements are perfect for making furniture. With smooth details without chips, the furniture will be of better quality and with high aesthetic properties.

  We have our own production and are engaged in wholesale sales, so our important advantage is the price. Cutting chipboard cheaply, but at the same time with high quality - this is what we offer our customers. If you are looking for a company that will cut chipboard according to the customer's size (Moscow) or sell high-quality ready-made elements from chipboard, then contact RASPILPODOLSK!