Wall painting wallpaper price ter. Painting wallpaper: the cost of work per square meter. Partial alignment of walls

If you are looking for experienced craftsmen for painting wallpaper, please contact our company. We guarantee high quality and responsible approach to work. Our masters accurately perform all stages technological scheme, using only best materials and tools. We can also promise that the previously agreed terms for the repair will be observed exactly. The cost of painting wallpaper depends on the materials used and the amount of work. We have the lowest rates in Moscow, as you can see for yourself.

Execution technology

For painting surfaces, you can use water-based or latex paint. It is very important to use materials that are water-based and do not contain aggressive substances. It is usually applied with a brush or roller. If the amount of work is significant, it is recommended to use a spray gun. With help this equipment it is very easy to process all the walls in the shortest possible time. Also, to obtain a better result, it is necessary to apply several layers of paint.

Are you planning to create an unusual interior? Contact us and place an order for wallpaper painting at an affordable price per m2 in Moscow. We specialize in finishing works of varying complexity. We can advise on the selection of materials, color and texture. We perform all types of work qualitatively and relatively inexpensively. If you want to significantly reduce the cost of repairs, painting wallpaper will be the perfect way out on a modest budget. Painted wallpaper will bring the desired novelty and color to your home, change its appearance.

What wallpaper to use for painting?

Once upon a time, only roll wallpaper. Now the situation on the repair market has changed, and products with a certain structure are used for interior decoration, which are ideal for painting. What wallpaper can be painted? Almost all types of wallpaper material are used for painting:

1. Wallpaper with non-woven base;
2. Vinyl coverings;
3. Glass fiber.

Paper wallpapers are not recommended for painting, as they cannot withstand the load and can simply become sour from the paint. In order not to waste money in vain, use the telephone for communication and consult with our specialists. Be sure, you will be prompted which material to use for staining is more appropriate.

The color solution can be the most unexpected: from classic strict shades to trendy stylish colors.

What paint to paint the wallpaper, the price of the work?

Typically used for painting water-based paint. You can choose another option, for example, with acrylic, latex or dispersion paint. The cost of painting non-woven wallpaper using a water-based emulsion is the most economical option. Coloring composition odorless, safe for health, resistant to external influences, dries quickly.

Before you start painting work, it is necessary to prepare the walls. Preparatory work include:

• Cleaning the surface from the remnants of the old coating, including old paint.
• Elimination of mold or rust with the use of special compounds.
• If necessary, priming and puttying the walls.

• When performing finishing work, use the services of professionals. Thus, you will reduce costs and gain confidence that the repair will be completed in a short time.
• Remember that professionals have the necessary skills and experience to make a flawless repair.
• The price of wallpaper painting is available to all customers without exception, which allows you not to spend own forces and time, nerves to repair.

In what order do repairs? The answer is simple…

Painting wallpaper is a popular option for wall decoration, painted wallpaper does not fade like ordinary wallpaper, and they are also resistant to physical influences. Do you want to know the price per m2 of wallpaper painting? We will learn how to calculate the cost very soon.

If you want to get an unusual interior at minimal cost, you can resort to painting the wallpaper. But there is one caveat: old paper wallpaper is not suitable for painting. When you try to paint them, they will become covered with bubbles, in the worst case, they will fall off the walls. There are wallpapers destined especially for painting. The easiest option - paper wallpaper, more expensive - non-woven and fiberglass. You can use white or colored ones - the main thing is that they are monophonic. First change the doors or glue the wallpaper? Everything is always done differently, but the only correct way is: first the doors, then sealing the cracks, then finishing the doors, then wallpapering, and only lastly installing the casing.

Tools and materials for painting wallpaper

Not any paint is suitable, but only acrylic, latex or emulsion. It is not recommended to use oil paint: it forms airtight film , and when applied flows down on the surface , without giving a clear picture . For staining, you will need two brushes ( wide and narrow), a paint roller and a foam rubber sponge. You also need masking tape, a sharp knife and a tray. You can also paint the walls under the wallpaper, but this article will consider the technology of painting the wallpaper.

Operating procedure at wallpaper painting

First, they change the doors or glue the wallpaper - a question that everyone who decides to paint the wallpaper with their own hands asks themselves. We found out that in the first place they mount the door. Let's figure out how to paint the wallpaper. If they already prepared for staining remove furniture and cover the floor with protective material such as plastic sheeting. Surfaces to be protected from paint sealed with tape.

The paint is applied to dry wallpaper while avoiding blisters. If nevertheless a bubble appears, it is carefully cut with a knife, the edges are folded and repainted. Working with glass wall paper involves applying two layers of paint - first they treat the surface for the first time, wait for it to dry, then paint it over again. Masking tape is removed immediately after the work is completed, and the furniture is placed when the wallpaper is completely dry. Thus, it is not difficult to paint wallpaper with paint.

Useful tips for in coloring wallpaper

First, they change doors or glue wallpaper - an individual question. But we can say for sure that the coloring of cheap wallpapers is always impractical - for painting you need to choose a fairly expensive wallpaper. H To get an original effect, you can paint over the relief wallpaper from the wrong side, and then stick it on the wall. Where the material is thinnest, paint will be visible, while in other areas the wallpaper will retain its original color, eg white.

For coloring specially designed for this wallpaper is best to use a spray gun. From a brush or roller, they will deteriorate faster and will be able to withstand less repainting. Tight wallpaper can be painted 5-6 times throughout the entire service life. Question how to paint vinyl wallpapers or any others can be considered resolved. First they change the doors or glue the wallpaper - remember that the doors come first!

The cost of painting wallpaper per square meter

Finally, about the price. The price of wallpaper coloring is low - you need glue and the wallpaper itself, there will be no additional costs. It is best to choose high-quality and dense wallpaper specially designed for painting. To find out for sure, first they change the doors or glue the wallpaper, you need to figure it out a bit. Bildfan conducted a small study on the market and deduced the average prices for wallpaper painting in Moscow:

Painting wallpaper usually occurs exclusively in two layers. Before applying the paint on the first layer, you need to wait until it is completely dry.

Wallpaper painting - great way revive a tired interior.

Prices are relevant for Moscow and are average:

First they change the doors or glue the wallpaper - we now know. What about prices? Wallpapering for painting will cost 250 rubles per one square meter average. Removal of dilapidated wallpaper - about 80 rubles per square meter. Puttying the walls under the wallpaper sticker - about 250 rubles per square meter. Painting skirting boards will cost about 150 rubles. Painting wallpaper in two layers will cost about 300 rubles per square meter. Primer walls - about 100 rubles per square meter. Installation of ceiling plinths and installation floor plinths will cost at least two rubles.

Painting wallpaper price per m2, as we have already found out, will cost at least 300 rubles per square meter ...

You can conveniently navigate the cost and wallpaper options for your apartment or house on the website torg-oboi.ru.

Why is plastering and puttying of facades and walls from the inside and outer side? Surfaces are puttied and plastered, primarily to level them, insulate them, improve sound insulation and increase their decorative effect. AT modern construction and in the repair of office premises, the most common plaster mixes used to protect and decorate wood, brick, prefabricated and concrete structures and as a preparatory layer for painting or wallpapering. Standard plaster mortar prepared from dry cement, gypsum or lime mixtures with the addition of water in various proportions. At the same time, decorative dry mixes are also on sale, allowing you to achieve original design effects by creating a relief texture on the surface. Some plasters may have special properties: improve hydro and thermal insulation, acoustics, fire protection.

At preparation of estimates for plastering uses a set of standards for Finishing work, distributed over several sections of construction and repair collections. For example, section 2 of part 15 for finishing lists prices for plastering of facades, concrete and wooden walls, prefabricated structures, slopes, platbands, ceilings: high-quality, simple and improved. Note that several types of solutions can be used for plastering, incl. cement-lime, decorative, lime, cement, cement-ceresite and others - for an improved, simple and high-quality finish. To create a surface Venetian style in the estimate, you can use the standard GESN (FER, TER) 15-02-040. To create a high-quality plaster coating, it is necessary to prepare the surface of walls, skirting boards, ceilings, platbands and boxes with stuffed strips and mesh at the junctions before applying and grouting the mortar. For finishing prefabricated elements or monolithic walls for painting or wallpapering according to technology, it is often necessary to upholster surfaces with stucco shreds (thin splinter of different lengths) or thermal insulation, for which the table GESN (FER, TER) 15-02-033 is used when making estimates. When developing other estimates, it is required to make a frame made of soft steel wire or woven mesh stuffed with nails for simple, high-quality or improved plastering of walls, ceilings, columns - then the standard GESN (FER, TER) 15-02-037 or GESN (FER , TER) 15-02-036. A notch or a frame and mesh device is done to create artificial roughness on brick concrete or wooden surfaces.

When plastering work are made not after the construction of a new building, but during overhaul, budgeting is carried out in accordance with part 61 for repair and construction activities. Continuous leveling of walls, ceilings and slopes with polymer-cement and cement-lime mortars, beating, grinding and repairing plastered surfaces with lime-alabaster mortar, cleaning facades with a sandblaster from stairs, earth, scaffolding, metal frame for plastering - standards for these types of work are available in the repair price books. When the painted and plastered surface of walls and facades cracks and crumbles, the plaster needs to be ground. To do this, it is necessary to remove the old layers of paint, where the facade coating is deformed, moisten old plaster water and apply a thin layer of mortar and grind with a trowel or spatula.

Drawing up estimates for wallpapering

For pasting walls and ceilings, not only wallpapers are usually used, but also other materials: fabric, linkrust, decorative films. Wallpaper can be medium or high density and produced in rolls of various widths. Unlike ordinary and self-adhesive wallpapers made from paper raw materials, roll material linkrust has a plastic embossed pattern that requires painting with enamel or paint after gluing and drying. Sticking linkrust requires high precision work: the canvas should not be placed overlapping, but close, without sagging and cracks on the front cover. Films based on plastic can also be used for decoration internal walls and slopes. The film can be multi-color or plain, with adhesive layer or without it, smooth or embossed. When developing estimates for interior finishing work, the standards of table 15-06-003 are used, where the costs for pasting a decorative self-adhesive PVC film on concrete, plasterboard and plastered surfaces are estimated, taking into account the costs of degreasing, priming and puttying. At budgeting for upholstery work, you need to take into account the type and properties of the material used, as well as the type of coating on which the finished panels of wallpaper are pasted. According to the current National Security Council, plastered, plasterboard, gypsum and concrete surfaces can be pasted over with linkrust, ordinary, thick and embossed wallpaper, as well as washable decorative coatings on tissue and paper basis. Work with all types of materials is carried out according to approximately the same technology using a brush, plumb line, adhesive solution and scissors. True, when using thick and embossed wallpaper, linkrust and PVC films, glued back to back, their edges are evenly and neatly cut on both sides. Applying the adhesive solution to concrete, plaster, putty, wood or chipboard coatings is done with hard brushes. The panels on the walls are fixed vertically, starting from the most illuminated surfaces, then smoothed with a rag from the middle to the edges. The denser the material used, the more adhesive solution is required to apply in order to prepare the wallpaper for the sticker.

Synthetic washable wallpapers also have a dense texture, so the surface under them must be carefully glued. If, when preparing an estimate, it is necessary to estimate the costs of pasting walls with glass wallpaper for painting or other materials on a paper or fabric basis, the standards of GESN (FER / TER) 15-06-002 and 15-06-003 are usually used with the replacement of materials, painting is assessed according to GESN ( FER/TER) 15-06-004. The coating for any wallpaper should be well prepared, and the work should be done neatly and professionally.

Drawing up estimates for the preparation of walls for finishing work

In order to prepare walls and ceilings for painting or wallpapering, the surface must first be made dry and clean. At preparation of estimates for finishing works preparation of the coating for painting or wallpapering can be taken into account by one or more prices:

GESN (FER / TER) 13-07-002 - degreasing of the coating;

GESN (FER / TER) 13-06-003 (4) - cleaning with brushes, dedusting;

GESN (FER / TER) 15-02-031 - plastering;

GESN (FER / TER) 15-02-035 - finishing of walls, ceilings and partitions for painting and wallpaper;

GESNr (FERr / TERr) 53-14 (15) - repair brick walls and sealing cracks;

GESNr (FERr / TERr) 62-46 - cleaning of coatings from persistent contamination.

Preparation of bases for finishing is determined by the type of surface, which often require repair. Both on concrete and painted coatings there may be defects, irregularities and spots that can be rubbed with a solution, cleaned of dirt and dust, removed roughness, sanded, repaired cracks, puttyed. Grinding plaster in the preparation of walls and slopes for wallpaper work is recommended to be done on the basis of fine-grained sand, which will make the coating smooth. In order for the wallpaper to better adhere to the plaster on coarse-grained sand, putty or other finely dispersed mortar can be applied on top, thoroughly rubbed and leveled. When wallpapering, it is extremely important to ensure quality foundation under the sticker: the smoother it is, the stronger the wallpaper will stick, the less irregularities and defects there will be, and the higher the decorative and aesthetic properties of the new coating will be.