Esbe valves are one of the most reliable and functional components used in various systems ah water supply, including domestic and main. It has a very wide range, which includes: rotary vrg131, dn25, as well as other popular varieties.
Currently, a three-way rotary sample of such equipment can be installed in every home. In order to do it right, let's look at the intricacies of working with such equipment and the features of its use.
Article content
Esbe valves - technical features of devices
Esbe valves are a variety of devices used to control a liquid or gas when it is supplied from one pipe to another. The three-way type of valves is distinguished by the presence of three connections that allow you to effectively redirect the flows in the system, especially in the case of mixing hot and cold water.
Valve adjustment of this typewithin the same system can realize the servo. This device needs a little more attention.
Servo. it separate element in the system that controls the position of the valves. The servo drive is usually the most affordable and easy to install, which is why it is most often used for.
By structural features the servo drive can be different, most often the category of such devices includes. For example, this can be installed with vrg131 samples. They give today highest quality and accuracy in system maintenance, which is why they are so popular among consumers.
In some devices, a servo drive, as well as motor control is not used. In such cases, such special devices are used as for adjusting the operation of the equipment.
Such varieties include, for example, a dn25 valve, which can be mounted in a crane without a drive.
Esbe three-way valve overview (video)
Appointment of Esbe valves
This type of product can be used in a wide range of systems, including heating systems, even centralized, hot, cold water supply, as well as air conditioning.
These types of valves are suitable for various systems, including those operating on oil products, gas, as well as eco-fuels, including solar energy or wind energy. It is possible to install these types of equipment, for example, a three-way rotary valve vrg131, as for networks central water supply as well as for home networks.
You can pick up a product for any crane. It is only important to choose the right type of product and install it according to the recommendations. Also, for the system to work properly, it is very important to adjust the servomotor or thermostatic controller.
Then the model chosen by you will work without failures, irrespective of the set technical parameters.
Advantages of using this type of valves
Among the main advantages of installing exactly Esbe products are:
- Ease of installation of this type of components, the ability to install samples in virtually any system.
- Wide temperature Range work, especially for models such as the vrg131 slewing crane.
- Versatility in use - can be used in networks with different loads.
- No need for maintenance of such samples when correct installation similar equipment.
- Can be used with any Esbe actuator that has the required specifications.
- The presence in some details of the so-called burn protection functions– automatic feed stop hot water in the event that the cold has ceased to flow into the system.
Popular models of Esbe valves
Currently, the following models of Esbe valves are especially popular on sale:
- VTA200 equipment is the best faucet for all water supply systems. Applicable for systems without hot water recirculation, as well as HWC with this function. Does not require special maintenance;
- VTA270 is a model range suitable for installation in underfloor heating systems. They can be mounted in systems where there is no risk of “burning”. Suitable for systems with a fairly large area - up to 100 square meters;
- VTA310 is a device, like the vrg131 swivel tap, suitable for all water supply systems where there are no special requirements for protection against burns. Designed for areas with a maximum coolant temperature of 95 degrees, withstand a differential pressure of 0.3 MPa. This type valves can be mounted in a crane with any type of drive;
- VTA330/VTA360 - equipment that is installed in systems that do not have additional devices that carry out temperature control. Peculiarities this equipment are that it, like the 3-way valve vrg131, reacts as sensitively as possible to changes in pressure in the system and allows you to maintain a stable water temperature even when it jumps. This model comes with a special protective cover, unless, of course, the user has chosen a different package. Parts of the VTA330/VTA360 are only distinguishable by the direction of the water flow;
- VTC300 is a thermostatic mixer. The crane is used for installation with boilers up to 30 kW. It is used in cases where a coolant of a sufficiently low temperature enters through the return pipe of the equipment. There is no need to install a servo drive for this model - without it, it also functions quite normally. The equipment has several installation options and can be easily adapted to the requirements of your chosen system;
- DN25 is another special popular model valve. Represents . Can also be used to protect boilers power up to 150 kW. Working temperature this sample is also 110 degrees. DN25 is completely unpretentious to the installation conditions, its efficiency does not depend on the chosen installation position;
- model vrg131 - designed specifically for use in hot water networks. Released vrg from a specialized brass alloy, which significantly increases its service life. Can be set manually. It is recommended to use a servomotor from the same manufacturer to control this three-way valve.
Esbe products are quite popular today. is no exception. It is one of the many elements that are included in residential buildings.
The need to use
This design, on the one hand, is quite simple, but on the other hand, it is designed to perform an extremely important task, being part of engineering networks. Everyone knows the rule that demand creates supply, which is why on the market today you can find many models that are represented by various manufacturers. However, valves manufactured by Esbe are distinguished by excellent performance. A three-way valve of this type can be purchased at an affordable cost. This is confirmed by user reviews.
Design features
In a wide range today you can find Esbe products. The three-way valve is no exception. This element has a regulating component, which is a ball or a rod. The latter moves vertically, but as for the ball, its movement occurs around its axis. Due to the fact that the movements of the regulating element do not allow to block the flow of liquid, distribution and mixing occurs. The most common and simple models are cranes.
Main plus
Their main advantage is low cost and simplicity. However, if you need to adjust the three-way Esbe valve, then it is worth excluding the acquisition simple devices, since they have the main drawback, expressed in the absence of the ability to stabilize temperature regime at the exit.
Carrying out installation work
Almost all described valves that are on the market are connected on the basis of one scheme. Most often, mixer taps are used in water supply systems. Their main goal is to reduce the risk of backflow. Between the streams of cold and hot water, a pressure difference will inevitably occur. It can cause reverse flow. If you install a valve, then you will not encounter such a problem. If we are talking about a heating system, then such devices are used exclusively in three directions, namely, to stabilize the temperature regime of the coolant flow in the incoming pipeline of boiler equipment, to reduce the water supply from high temperature from the heating device to the pipeline, as well as in the conditions of mixing units of systems such as underfloor heating.
Connection in the mixing unit
If you are interested in Esbe products, the three-way valve can be purchased from any relevant store. One has only to consider before that how the tap is used in the underfloor heating system. Application allows you to create an additional circuit in the system. It connects with two points to this allows for a constant circulation of water at the outlet. As for the input, the flow is provided only if there is a need to receive additional heat. The thermostatic valve is connected to the mixing unit. Due to the fact that all valves are at the point, they are narrowed, which can cause insufficient flow of pumping equipment. To increase it, it is necessary to create an additional line, with which you can reduce the electricity consumption of the pump. During the installation process, it is worth remembering that a second line is not always required. A number of valve models have a fairly large passage. Three-way valve Esbe, whose connection scheme can be developed based on the instructions presented in the article, may suggest insufficient flow capacity on the first line. In this case, the thermostat is not able to open the passage of the required size. This question can be easily solved in two ways: the first involves narrowing the second line, while the other option is to mount on it. The latter option is considered more productive, as it allows you to adjust the flow.
Alternative installation option
Installation of the Esbe three-way valve can also be done by another method. It does not involve the use of a balancing crane. The pump is connected to the second line, eventually the temperature of the outlet and inlet streams equalize. A thermostatic valve is found in single circuit systems. The simplest example of such systems is underfloor heating in small rooms. In this case, it is not always justified to create mixing unit with large dimensions. It is best to connect the underfloor heating system using one circuit. If you are thinking about how to connect an Esbe three-way valve with an electric drive, then it can be placed on the return line, through which cooled water runs. In this case, the thermostat will lead to the movement of the valves, the cross section will be increased, and the flow will be open. As soon as the pipe is heated, the thermal sensor will detect this and reduce the flow.
Installation of a valve for a heating boiler
This issue, according to professionals, must be considered separately. the main task installation is to exclude the entry of a cold water flow to the incoming pipeline, which is connected to heating equipment. If this requirement is not taken into account, then condensation will occur on the pipes, temperature drops will lead to deformation at the joints. If we talk about the consequences of deformation, then at best you will encounter a small leak, while in worst system will need to be completely changed. In order to avoid the need to repair the Esbe three-way valve, it is important to connect stop valves to the boiler, which is characterized by temperature fluctuations during operation. If you install a mixing valve, then you can ensure that water does not enter the inlet of the equipment, the temperature of which is below 50 degrees. The temperature difference is significantly reduced negative impact cold is reduced. Experts advise supplementing systems that are equipped using plastic pipelines, mixing valves. In this case, the task is to prevent the ingress of high temperature water into the pipeline. While polymers have many advantages, they are not very good at frequent drops temperatures that may be higher than operating.
Under the influence of such conditions, the pipeline system fails soon enough. Experts advise choosing Esbe products. The three-way valve, the installation instructions for which are presented in the article, has been manufactured by this company for a long time. If you use this element, then you can provide temperature indicators ranging from 75 to 85 degrees, which are recommended by experts. Mounting the valve allows you to cope with many problems, however, the model must be selected in accordance with the characteristics of the network, and also have a sufficiently large passage.
Adjustment Features
When purchasing Esbe products - a three-way valve, the installation and adjustment instructions for which are presented in the article - you must remember that with this device it is possible to mix the cooled water from the return into the supply. For high-quality regulation, not only a three-way valve is installed in the system, but also a four-way valve, which must be present in the heating system. It is located directly in front of the contour of the warm floor. The handle allows you to open the bypass, while circulation pumps and equipment draw in the cooled coolant from the return, where it is mixed with hot water. In order for the adjustment to be made as efficiently as possible, you should understand what happens at certain positions of the handle. The latter can be set to the bypass overlap position, while the hot coolant will flow into the pipe of the underfloor heating system. As for the mode in which the supply is blocked, water enters the tank and runs in a small circle. The third position allows you to feed the supply from the return system without blocking the full cycle of water passage throughout the circuit.
Conclusion
Recently, experts have increasingly recommended purchasing Esbe brand products. A three-way valve, the instruction, the wiring diagram of which is presented in the article, is just an example of this. He can perform indispensable element heating systems and part of the boiler equipment, however, it is important to choose the right model and install it, observing the technology.
In a wide range of valves used for heating systems, there is an element that is used quite rarely. Its shape resembles a tee, although the functions it performs are completely different. We are talking about a three-way valve, the principle of operation of which will be discussed in this article.
The principle of operation of the three-way valve
What is this device, why is it needed at all?
How it works
The three-way valve is mounted on those sections of the pipelines where it is required to divide the flow of the circulating fluid into 2 circuits:
- with variable hydraulic regime;
- with constant.
In most cases, a constant flow is required for those for whom a liquid of high quality and in the indicated volumes is supplied. It is regulated in accordance with the quality indicators. As for the variable flow, it is used for objects where quality indicators are not the main ones. There great importance has a quantity factor. Simply put, the supply of coolant there is carried out according to the required amount.
Note! The shut-off valves also include an analogue of the device described in the article - a two-way valve. How is it different? The fact is that the three-way option works on a completely different principle. The rod included in its design is unable to block the flow of fluid, which has constant hydraulic performance.
The stem is open all the time, it is adjusted to one or another volume of liquid. Consequently, users will be able to get the volume they need, both in terms of quantity and quality. In general, this device is unable to stop the supply of liquid to a network in which the hydraulic flow is constant. At the same time, it may well block the flow of a variable type, due to which, in fact, it becomes possible to adjust the flow / pressure.
And if you connect a pair of two-way type devices, you can get one, but three-way. But it is necessary that both work on the reverse, in other words, when one valve is closed, the next one should open.
Video - Three-way valve working principle
Valve classification
Without lengthy introductions, we note that the device can be of two types according to the principle of operation. It can be:
- separating;
- mixing.
Features of the action of each type are already clear from their name. The mixing device consists of two outlets and an inlet. In other words, it is necessary for mixing fluid flows, which may be required in order to reduce its temperature. By the way, this is the most best option in order to ask desired mode in the "warm floor".
The procedure for adjusting the temperature regime is extremely simple. You just need to know about the current temperature indicators of the incoming fluid flows, accurately calculate the required proportions of each of them so that you get the desired indicators at the output. By the way, this device, subject to proper installation and adjustment, can also function for flow separation.
But the dividing valve divides one flow in two, therefore, it is equipped with one inlet and two outlets. This device is mainly used to separate the flow of hot water into DHW systems. Although quite often it is also found in the piping of air heaters.
Outwardly, both options are almost identical. But if you look at their drawing in section, then their main difference is immediately visible. The stem, which is installed in the mixing type device, has one ball valve. It is located in the center and blocks the main passage.
As for separating devices, in them the stem has two such valves, which are installed at the outlets. They function according to the following principle: one of them is pressed against the saddle, closing the passage, and the other simultaneously opens passage No. 2.
By management method modern models can be:
- electric;
- manual.
In most cases, a hand-held device is used, which looks like an ordinary ball valve, but is equipped with three outlet pipes. But electrical models, having automatic control, are used mainly in private houses, namely in order to distribute heat. For example, the user can set the temperature regime by room, and the working fluid will flow in accordance with the distance of the room from heater. As an option - you can combine it with a "warm floor".
Video - Device in the boiler group
Three-way valves, as well as other devices, are defined according to the system pressure and inlet diameter. All this is regulated by GOST. And if the requirements of the latter are not met, it will be regarded as gross violation, especially when it comes to the pressure indicator in the line.
Applications
The three-way valve, the principle of operation of which was discussed above, has a fairly wide scope. So, its varieties, such as an electromagnetic device or a device with a thermal head, are often found in modern highways, where it is necessary to adjust the proportions when mixing two separated liquid flows, but without reducing power or volume.
As for domestic use, the most popular here is a thermostatic mixing device, with which, as noted above, you can adjust the temperature of the working fluid. This liquid can be supplied both to the "warm floor" pipeline and to heating radiators. And if the valve also has automatic control, then it will be possible to control the temperature in the home without any problems!
Note! The use of a three-way valve in a heating system in order to balance temperature fluctuations is extremely beneficial not only in terms of comfort and convenience, but also in terms of cost savings.
The fact is that by regulating the temperature of the liquid on the "return" of the heater, it is possible to significantly reduce the amount of fuel consumed, and this will have a positive effect on the efficiency of the system itself. In some systems, a valve is simply necessary. For example, in a "warm floor" system, this device prevents overheating floor covering above a given level of comfort, thereby relieving users of discomfort.
Control devices of this kind are also used in water supply systems in order to obtain a permanent flow at the required temperature. The simplest example is an ordinary faucet, where you can make water hot/cooler by opening/closing a cold faucet.
Adjusting the flow of the working fluid. What to look for when buying?
Manual adjustment is made using the usual ball valve. Visually, it is very similar to a simple valve, but has an additional outlet. Reinforcement of this kind is used for forced manual control.
As for automatic adjustment, then a special three-way valve is used here, equipped with an electromechanical device for changing the position of the stem. It should be connected to a thermostat in order to be able to adjust the temperature in the room.
Remember that when buying a valve, you must without fail taking into account technical specifications device, which includes the following.
- Diameter of connection to the heating main. Often this indicator varies from 2 to 4 centimeters, although much depends on the characteristics of the system itself. If the device suitable diameter could not be found, you will have to use special adapters.
- The possibility of installing a servo drive on a three-way valve, the principle of operation is considered at the beginning of the article. Thanks to this, the device will be able to work automatically. This moment is very important if the device is selected for operation in " warm floors» water type.
- Finally, this is the throughput of the pipeline. This concept refers to the volume of liquid that can pass through it in a certain time.
Popular manufacturers
There are many manufacturers of three-way valves on the domestic market. The choice of a particular model depends primarily on:
- type of mechanism (and, we recall, it can be mechanical or electrical);
- areas of use (DHW, cold water, "warm floor", heating).
The most popular device is considered to be Esbe is a Swedish valve from a company that has been around for over a hundred years. This is a reliable, high-quality and durable product that has proven itself in many areas. Combination European quality and modern technologies.
Another popular model is the American Honeywell - a true brainchild high technology. Simple operation, convenience and comfort, compactness and reliability - that's distinctive features these valves.
Finally, relatively "young", but promising devices are valves of the Valtec line - the result of a joint collaboration between Italian and Russian engineers. All products are of high quality, sold with a warranty period of seven years. They differ in that they have a very affordable price.
How to install a mixing valve with your own hands
This installation scheme is used mainly in boiler rooms. heating systems, which are connected to a hydraulic separator or to a non-pressure manifold. And the pump located in circuit No. 2 provides the required circulation of the working fluid.
Note! If the three-way valve will be connected directly to a bypass heat source connected to port B, then a valve with a hydraulic resistance equal to the same resistance of this source will also be required.
If this is not done, then the consumption of the working fluid for segment A-B will oscillate according to the movement of the stem. We also note that this installation scheme provides for the possible termination of the circulation of liquid through the source, if the installation was carried out without a circulation pump or a hydraulic separator in the main circuit.
It is undesirable to connect the valve to heating networks or a pressure manifold in the absence of devices that throttle excessive pressure. Otherwise, the fluid flow section A-B will fluctuate, and significantly.
If overheating of the return is allowed, excessive pressure is eliminated by means of a jumper installed in parallel to the valve admixture in the circuit.
How to install a dividing valve with your own hands
Providing quantitative adjustment by changing the flow of fluid is the main function that such a three-way valve performs. The principle of its operation is extremely simple and has been discussed above. It is used where it is possible to bypass the liquid to the "return", and the termination of circulation, on the contrary, is not allowed.
Note! This connection scheme has gained wide popularity in water and air heating units that are connected from individual boiler houses.
In order to link the hydraulic circuits, it is necessary that the pressure loss of the consumer be equal to the loss on the balancing valve in the bypass. The diagram shown here is intended for installation on those pipelines in which there is excessive pressure. The liquid in this case moves due to the strong pressure generated by the circulation pump.
Video - Three-way valve and its principle of operation
Esbe valves are one of the most reliable and functional components used in various water supply systems, including domestic and main ones. It has a very wide range, which includes: rotary vrg131, dn25, as well as other popular varieties.
Currently, a three-way rotary sample of such equipment can be installed in every home. In order to do it right, let's look at the intricacies of working with such equipment and the features of its use.
Article content
Esbe valves - technical features of devices
Esbe valves are a variety of devices used to control a liquid or gas when it is supplied from one pipe to another. The three-way type of valves is distinguished by the presence of three connections that allow you to effectively redirect the flows in the system, especially in the case of mixing hot and cold water.
Adjusting the operation of valves of this type within the same system can realize the servo. This device needs a little more attention.
Servo. This is a separate element in the system that controls the position of the valves. A servo drive is usually the most affordable and easy to install, which is why it is most often used when.
According to the design features, the servo drive can be different, most often they are included in the category of such devices. For example, this can be installed with vrg131 samples. Today they provide the highest quality and accuracy in system maintenance, which is why they are so popular among consumers.
In some devices, a servo drive, as well as motor control is not used. In such cases, such special devices are used as for adjusting the operation of the equipment.
Such varieties include, for example, a dn25 valve, which can be mounted in a crane without a drive.
Esbe three-way valve overview (video)
Appointment of Esbe valves
This type of product can be used in a wide range of systems, including heating systems, even centralized, hot, cold water supply, as well as air conditioning.
These types of valves are suitable for various systems, including those operating on oil products, gas, as well as eco-fuels, including solar energy or wind energy. It is possible to install these types of equipment, for example, a three-way rotary valve vrg131, both for central water supply networks and for home networks.
You can pick up a product for any crane. It is only important to choose the right type of product and install it according to the recommendations. Also, for the system to work properly, it is very important to adjust the servomotor or thermostatic controller.
Then the model chosen by you will work without failures, irrespective of the set technical parameters.
Advantages of using this type of valves
Among the main advantages of installing exactly Esbe products are:
- Ease of installation of this type of components, the ability to install samples in virtually any system.
- Wide operating temperature range, especially for models such as the vrg131 swivel crane.
- Versatility in use - can be used in networks with different loads.
- No need for maintenance of such samples with the correct installation of such equipment.
- Can be used with any Esbe actuator that has the required specifications.
- The presence in some details of the so-called burn protection functions- automatic shutdown of hot water supply in the event that cold water has ceased to flow into the system.
Popular models of Esbe valves
Currently, the following Esbe valve models are especially popular on sale:
- VTA200 equipment is the best faucet for all water supply systems. Applicable for systems without hot water recirculation, as well as HWC with this function. Does not require special maintenance;
- VTA270 is a model range suitable for installation in underfloor heating systems. They can be mounted in systems where there is no risk of “burning”. Suitable for systems with a fairly large area - up to 100 square meters;
- VTA310 is a device, like the vrg131 swivel tap, suitable for all water supply systems where there are no special requirements for protection against burns. Designed for areas with a maximum coolant temperature of 95 degrees, withstand a differential pressure of 0.3 MPa. This type of valve can be mounted in a crane with any type of actuator;
- VTA330/VTA360 - equipment that is installed in systems that do not have additional devices that carry out temperature control. The features of this equipment are that, like the 3-way valve vrg131, it reacts as sensitively as possible to changes in pressure in the system and allows you to maintain a stable water temperature even with its jumps. This model comes with a special protective cover, unless, of course, the user has chosen a different package. Parts of the VTA330/VTA360 are only distinguishable by the direction of the water flow;
- VTC300 is a thermostatic mixer. The crane is used for installation with boilers up to 30 kW. It is used in cases where a coolant of a sufficiently low temperature enters through the return pipe of the equipment. There is no need to install a servo drive for this model - without it, it also functions quite normally. The equipment has several installation options and can be easily adapted to the requirements of your chosen system;
- DN25 is another particularly popular valve model. Represents. Can also be used to protect boilers power up to 150 kW. The working temperature of this sample is also 110 degrees. DN25 is completely unpretentious to the installation conditions, its efficiency does not depend on the chosen installation position;
- model vrg131 - designed specifically for use in hot water networks. Released vrg from a specialized brass alloy, which significantly increases its service life. Can be set manually. It is recommended to use a servomotor from the same manufacturer to control this three-way valve.
Esbe products are quite popular today. is no exception. It is one of the many elements that are included in the life support system of residential buildings.
The need to use
This design, on the one hand, is quite simple, but on the other hand, it is designed to perform an extremely important task, being part of engineering networks. Everyone knows the rule that demand creates supply, which is why on the market today you can find many models that are represented by various manufacturers. However, valves manufactured by Esbe are distinguished by excellent performance. A three-way valve of this type can be purchased at an affordable cost. This is confirmed by user reviews.
Design features
In a wide range today you can find Esbe products. The three-way valve is no exception. This element has a regulating component, which is a ball or a rod. The latter moves vertically, but as for the ball, its movement occurs around its axis. Due to the fact that the movements of the regulating element do not allow to block the flow of liquid, distribution and mixing occurs. The most common and simple models are cranes.
Main plus
Their main advantage is low cost and simplicity. However, if you need to adjust the Esbe three-way valve, then you should exclude the purchase of simple devices, since they have the main drawback, expressed in the inability to stabilize the outlet temperature.
Carrying out installation work
Almost all described valves that are on the market are connected on the basis of one scheme. Most often, mixer taps are used in water supply systems. Their main goal is to reduce the risk of backflow. Between the streams of cold and hot water, a pressure difference will inevitably occur. It can cause reverse flow. If you install a valve, then you will not encounter such a problem. If we are talking about a heating system, then such devices are used exclusively in three directions, namely, to stabilize the temperature regime of the coolant flow in the incoming pipeline of boiler equipment, to reduce the supply of high-temperature water from the heating device to the pipeline, as well as in the conditions of mixing units of systems underfloor heating.
Connection in the mixing unit
If you are interested in Esbe products, the three-way valve can be purchased from any relevant store. One has only to consider before that how the tap is used in the underfloor heating system. The use of a mixing unit allows you to create an additional circuit in the system. It connects with two points to this allows for a constant circulation of water at the outlet. As for the inlet, the flow is provided only if there is a need to obtain additional heat. The thermostatic valve is connected to the mixing unit. Due to the fact that all valves are at the point, they are narrowed, which can cause insufficient flow of pumping equipment. To increase it, it is necessary to create an additional line, with which you can reduce the electricity consumption of the pump. During the installation process, it is worth remembering that a second line is not always required. A number of valve models have a fairly large passage. An Esbe three-way valve, whose connection diagram can be designed based on the instructions presented in the article, may suggest insufficient flow capacity in the first line. In this case, the thermostat is not able to open the passage of the required size. This issue can be easily solved in two ways: the first involves narrowing the second line, while the other option is to mount on it. The latter option is considered more productive, as it allows you to adjust the flow.
Alternative installation option
Installation of the Esbe three-way valve can also be done by another method. It does not involve the use of a balancing crane. The pump is connected to the second line, eventually the temperature of the outlet and inlet streams equalize. A thermostatic valve is found in single circuit systems. The simplest example of such systems is underfloor heating in small rooms. In this case, it is not always justified to create a mixing unit with large dimensions. It is best to connect the underfloor heating system using one circuit. If you are thinking about how to connect an Esbe three-way valve with an electric drive, then it can be placed on the return line, through which cooled water runs. In this case, the thermostat will lead to the movement of the valves, the cross section will be increased, and the flow will be open. As soon as the pipe is heated, the thermal sensor will detect this and reduce the flow.
Installation of a valve for a heating boiler
This issue, according to professionals, must be considered separately. The main task of the installation is to prevent the entry of a cold water flow to the incoming pipeline, which is connected to the heating equipment. If this requirement is not taken into account, then condensation will occur on the pipes, temperature drops will lead to deformation at the joints. If we talk about the consequences of deformation, then at best you will encounter a small leak, while at worst the system will need to be completely changed. In order to avoid the need to repair the Esbe three-way valve, it is important to connect the shut-off valves to the boiler, which is characterized by temperature changes during operation. If you install a mixing valve, then you can ensure that water does not enter the inlet of the equipment, the temperature of which is below 50 degrees. The temperature difference is significantly reduced, the negative impact of cold is reduced. Experts advise supplementing systems that are equipped with plastic pipelines with mixing valves. In this case, the task is to prevent the ingress of high temperature water into the pipeline. While polymers have many advantages, they do not cope well with frequent temperature changes, which can be higher than operating temperatures.
Under the influence of such conditions, the pipeline system fails soon enough. Experts advise choosing Esbe products. The three-way valve, the installation instructions for which are presented in the article, has been manufactured by this company for a long time. If you use this element, then you can provide temperature readings ranging from 75 to 85 degrees, which are recommended by experts. Mounting the valve allows you to cope with many problems, however, the model must be selected in accordance with the characteristics of the network, and also have a sufficiently large passage.
Adjustment Features
When purchasing Esbe products - a three-way valve, the installation and adjustment instructions for which are presented in the article - you must remember that with this device it is possible to mix the cooled water from the return into the supply. For high-quality regulation, not only a three-way valve is installed in the system, but also a four-way valve, which must be present in the heating system. It is located directly in front of the contour of the warm floor. The handle allows you to open the bypass, while the circulation pumps and equipment draw in the cooled coolant from the return, where it is mixed with hot water. In order for the adjustment to be made as efficiently as possible, you should understand what happens at certain positions of the handle. The latter can be set to the bypass overlap position, while the hot coolant will flow into the pipe of the underfloor heating system. As for the mode in which the supply is blocked, water enters the tank and runs in a small circle. The third position allows you to feed the supply from the return system without blocking the full cycle of water passage throughout the circuit.
Conclusion
Recently, experts have increasingly recommended purchasing Esbe brand products. A three-way valve, the instruction, the wiring diagram of which is presented in the article, is just an example of this. It can act as an indispensable element of the heating system and part of the boiler equipment, however, it is important to choose the right model and install it, observing the technology.
A three-way valve in a water supply or heating system is responsible for mixing or separating liquids of different temperatures, as well as for obtaining the required temperature at the outlet of the liquid (adjusting the temperature of the coolant using a servo drive).
Design features
The body of the device contains two inlets and one outlet for liquids and a control element, which can be different design(for example, a rotary ball or a running rod), also a place for a servo.
Usually, the valve is not designed to completely shut off the liquid outlet, but is only capable of controlling the mixing ratio of the liquids and the temperature in the system. The instruction does not imply, but functionally, it is quite possible to shut off the liquid supply.
A three-way valve of some kind, which performs a dividing function, may have a rotary servo drive to redirect the flow to different pipes(Then it is called "shut-off").
In this case, gradual or smooth mixing of liquids with temperature control does not occur, but the rotary mechanism consists of a ball (like a Bugatti ball valve).
There are several varieties of it, according to the type of drive mechanism, performing the same functions:
- Hydraulic slewing drive;
- Pneumatic drive;
- Electric servo.
Yes, three Esbe's new valve, having a servo drive, will assume the actual sample itself and a compatible drive manufactured by the same company.
Types and differences
Esbe has been in business for over 100 years and specializes in temperature control for hydraulic systems in small buildings.
It manufactures a valve and a rotary actuator for cooling or heating systems, also working "in conjunction" with indoor and outdoor temperature sensors in the system. The principle of operation of the Esbe three-way valve is similar to the above options.
The company produces several model series of three-way valves, including a mixing valve:
- Rotary valves (series models: VRG130, VRG330, 3F, H, VRH130, HG);
- Linear valves (series models: VLF300, VLF200, VLE132);
- Thermostatic mixing valve (series models: VTA and VTS).
Rotary valves
Valves of the VRG130 series are applied to systems of hot/cold water supply. This model range, like the subsequent ones, has various options(for example, a three-way valve from Esbe VRG 131 also belongs to this series and has a connection for a servo drive).
They are compact mixing models made of brass alloys, designed to minimize leakage and with a manual adjustment dial. The instruction indicates that they are also compatible with systems automatic control and Esbe controllers to automate valve operation.
The Esbe three-way valve of this model series is supplied with sizes DN 15-50, pressure class - PN 10, model options include varieties with internal (three-way mixing valve type Esbe models VRG131 with drive connection), external thread
(model VRG132), with union nut or compression fittings.
three-way Esbe's VRG330 Series Mixing Valve has similar features to the previously described VRG131 Series (DN 20-50, PN 10), but is specifically designed for high flows (60 percent kvs difference between inlets).
It can also be equipped with compatible controllers and automatic control. Available with three connection types: internal thread, external thread, rotating nut.
According to Esbe specification, 3F series rotary mixing valves are designed for heating and cooling applications.
Esbe controllers and automatic control systems can also be used with them.
For ease of installation, the Esbe 3F three-way valve is marked with an adjustment scale on both sides. The valve body is made of cast iron, the model is also supplied with an adapter for a flange pipe PN 6, model sizes - DN25-150.
The mixing valve from Esbe series H (DN25-40) and HG (DN25) is designed for installation in confined spaces.
This three-way control valve from Esbe is used only for heating systems and is specified for operation with a boiler group (made of cast iron, special "H"-shaped body). It also has an acceptable price.
As the main type of connection, both internal thread and its mixed type are used. Compatible with Esbe controllers and actuators like VRG131 .
Models of the VRH130 series are also made in the "H"-shaped version, but made of brass with a pressure class of PN 10. This model is more versatile than the previous sample and can also be used in water supply systems, is available with different body widths.
Line valves
The VLF300 series is a 3-way mixing line with sizes DN 15-50.
This model range is It is made of nodular cast iron and can be used with working fluids such as cold/hot water, and which contain antifreeze components (glycol, for example).
In the latter case, the sample must be equipped with a rod heater. It is completed with a flange for a PN 6 pipe. Models similar to those previously indicated, VLF200 dn25 - have a high working pressure of up to 16 bar (against 6 bar for the previously indicated model range).
Models VLE132 - made of bronze with sizes DN 15-50. These are linear motorized valves, which, like the previously mentioned similar models, can use water with glycol as working fluids (connection - external thread PN16), unlike the VRG131 series. Its price ranges from 140 to 350 euros.
All listed 3-way in-line valves are compatible with the Esbe controller and actuator.
thermostatic mixing valve
VTS520 / 550 - the instruction indicates that the three-way valves are designed to work with hot water systems that are connected to the system solar heating. Its price starts from 150 euros.
A feature of this model range is that the Esbe three-way thermostatic valve comes with specialized protection against burns, since the liquid circulating in the system is of a sufficiently high temperature.
Esbe's three-way thermostatic mixing valve with "scald protection" features a sensor that automatically turns off the hot water servo if cold water is not supplied.
The coolant with which these models work is water (including drinking water), the coolant of closed systems is water with non-freezing components. Pressure class - PN 10, the body is made of brass, resistant to corrosion, for example, the VRG131 valve is not suitable for such a system.
VTA330/530 is Esbe's thermostatic mixing valve of this series designed for use in domestic hot water systems, as well as in faucets or showers where no other means of temperature control is provided (VTA330), or in domestic hot water systems with high flow (VTA530). Its price is within 150 euros.
Also equipped with a security system you from burns. Pressure class PN 10 (material - brass, resistant to corrosion), produced with external threaded connection, fittings or adapters.
VTA360 / 560 - a series similar to the previous one in execution, but equipped with a large number of fittings and connections. The instruction assumes that the three-way drive Esbe devices This series must also be compatible with the specified company in the specification.
Representatives of the VTA320/520 series can be used both in conditions similar to the operating modes of the previous model ranges, and in systems where other temperature control systems are present.
These valves are recommended for hot water circulation systems (HWC) or underfloor heating systems. Also equipped with "burn protection". VTA370 / 570 - models designed for use in the "warm floor" system, have a high throughput.
VTA310 - sample supplied with adjusting knob, without burn protection system. It is used in domestic water supply systems, including - in the system of hot water supply of a closed cycle (HWC). The price for it starts from 50 euros.
Valve design overview (video)
Installation features and prices
When installing a three-way mixing valve, various options, instructions and algorithms are selected for installation. As a rule, the part is not installed directly to the heat source, since the system uses a non-pressure manifold or "hydraulic arrowhead".
In the version for heating, the simplified instruction assumes that the coolant is supplied from the boiler to the valve, from there the coolant is supplied to the heating system through the pump.
The liquid that has passed through the heating system and cooled down is sent to the boiler for heating, but also to the mixing valve, which ensures the temperature control of the supplied substance.
The instruction for the Esbe three-way valve usually involves a description of the connection of the valve to the system, which, depending on the model range, may be different.
The cw602n Esbe three-way valve (brass brand is indicated here) of the VRG130 model range (namely, VRG131 ½) costs an average of $ 170 (if purchased complete with an actuator).
The price of a three-way valve from Esbe linear VLA330, depending on the configuration, is $ 150 (not equipped with an electric actuator).
The Esbe three-way thermostatic valve (VTA 320) can be priced at $70 or more.
The Swedish company ESBE (Esby) has been a recognized leader in the field of water heating and cooling control systems for many years. ESBE VRG 131 and 3F three-way mixing valves and ESBE ARA and 90 series electric actuators are an example of excellent quality and reliability at an affordable price. A wide range of mixing valves Esbe allows you to do optimal choice depending on system requirements. High quality brass alloys or cast iron are used as materials. The valves are available with threaded or flanged connections.
| Model | vendor code | DN, mm | Connection | Kvs, m³/h | Weight, kg | Replaces |
|---|---|---|---|---|---|---|
| VRG131-15-0.4 price >> | 11600100 | 15 | Rp 1/2" | 0,4 | 0,40 | - |
| VRG131-15-0.63 price >> | 11600200 | 15 | Rp 1/2" | 0,63 | 0,40 | - |
| VRG131-15-1 price >> | 11600300 | 15 | Rp 1/2" | 1,0 | 0,40 | - |
| VRG131-15-1.6 price >> | 11600400 | 15 | Rp 1/2" | 1,6 | 0,40 | - |
| VRG131-15-2.5 price >> | 11600500 | 15 | Rp 1/2" | 2,5 | 0,40 | 3MG15, 3G15 |
| VRG131-15-4 price >> | 11600600 | 15 | Rp 1/2" | 4,0 | 0,40 | - |
| VRG131-20-2.5 price >> | 11600700 | 20 | Rp 3/4" | 2,5 | 0,43 | - |
| VRG131-20-4 price >> | 11600800 | 20 | Rp 3/4" | 4,0 | 0,43 | - |
| VRG131-20-6.3 price >> | 11600900 | 20 | Rp 3/4" | 6,3 | 0,43 | 3MG20, 3G20 |
| VRG131-25-6.3 price >> | 11601000 | 25 | Rp 1" |
6,3 | 0,70 | - |
| VRG131-25-10 price >> | 11601100 | 25 | Rp 1" |
10 | 0,70 | 3MG25, 3G25 |
| VRG131-32-16 price >> | 11601200 | 32 | Rp 1 1/4" | 16 | 0,95 | 3MG32, 3G32 |
| VRG131-40-25 price >> | 11603400 | 40 | Rp 1 1/2" | 25 | 1,68 | 3G40 |
| VRG131-50-40 price >> | 11603600 | 50 | Rp 2" |
40 | 2,30 | 3G50 |
| VRG132-25-10 price >> | 11602500 | 25 | G 1 1/4" | 10 | 0,70 | 3MGA25 |
| VRG132-32-16 price >> | 11602600 | 32 | G 1 1/2" | 16 | 0,95 | 3MGA25 |
 |
Flanged mixing valves Esbe 3F, 4Fmixing flanged valves ESBE 3F, 4F are made of cast iron and are widely used in heating and cooling systems. Esbe 3F valves can be used in closed systems with water containing no dissolved oxygen. When the Esbe 3F, 4F valve is operating, the hotter coolant is mixed with the cold one entering the boiler, which ensures an increase in the temperature of the coolant returning to the boiler. This reduces the risk of low temperature corrosion. The valves are manufactured in sizes DN 32-150. Flange connections, body - cast iron, spool - brass, seal - EPDM, T=-10C...110C. Pmax=6 bar |
| Model | vendor code | DN, mm | Torque required drive, Nm |
Kvs, m³/h | Weight, kg |
|---|---|---|---|---|---|
| 3F-20 price >> | 11100100 | 20 | 3 | 12 | 3,5 |
| 3F-25 price >> | 11100200 | 25 | 3 | 18 | 4,0 |
| 3F-32 price >> | 11100300 | 32 | 5 | 28 | 5,9 |
| 3F-40 price >> | 11100400 | 40 | 5 | 44 | 6,8 |
| 3F-50 price >> | 11100600 | 50 | 10 | 60 | 9,1 |
| 3F-65 price >> | 11100800 | 65 | 10 | 90 | 10,0 |
| 3F-80 price >> | 11101000 | 80 | 10 | 150 | 16,2 |
| 3F-100 price >> | 11101200 | 100 | 15 | 225 | 21,0 |
| 3F-125 price >> | 11101400 | 125 | 15 | 280 | 27,0 |
| 3F-150 price >> | 11101600 | 150 | 15 | 400 | 37,0 |
| 4F-50 price >> | 11101900 | 50 | 10 | 60 | 11,0 |
| 4F-65 price >> | 11102000 | 65 | 10 | 90 | 12,2 |
| 4F-80 price >> | 11102100 | 80 | 10 | 150 | 20,0 |
| 4F-100 price >> | 11102200 | 100 | 15 | 225 | 25,0 |
 |
Electric actuators, Esbe ARA 600 actuators for three-way mixing valves.Esbe ARA 600 actuators are designed to automate the control of valves of the VRG, VRB, MG, G, F series< DN50. Выпускаются для 24В и 230 В (частота 50 Гц). Некоторые виды клапанов и приводов сконструированы таким образом, что между ними образуется специальное соединение «клапан – привод», образующее устройство с unique characteristics accuracy and stability. The operating range of the actuators is from 90°. different models provide different time closing, on average from 15 to 240 seconds. Reliability, cost-effectiveness and ease of use are the main principles that guide Esbe specialists when developing Esbe ARA servo drives. |
| Model | vendor code | Email food | Time closing |
Control | An effort | Replaces |
|---|---|---|---|---|---|---|
| ARA639 price >> | 12520100 | AC/DC 24 V | 15/30/60/120 sec. |
0-10V/4-20mA |
6 Nm |
- |
| ARA642 price >> | 12101600 | AC 230V | 30 sec. |
3-point with add. off |
6 Nm | - |
| ARA651 price >> | 12101200 | AC 230V | 60 sec. |
3 point | 6 Nm | 65 |
| ARA652 price >> | 12101700 | AC 230V | 60 sec. | 3-point with add. off | 6 Nm | 65M |
| ARA655 price >> | 12120900 | AC 230V | 60 sec. | 2 point | 6 Nm | 68 |
| ARA659 price >> | 12520200 | AC/DC 24 V | 45/120 sec. | 0-10V/4-20mA | 6 Nm | 62p |
| ARA661 price >> | 12101300 | AC 230V | 120 sec. | 3 point | 6 Nm | 66 |
| ARA662 price >> | 12101800 | AC 230V | 120 sec. | 3-point with add. off | 6 Nm | 66M |
| ARA663 price >> | 12100300 | AC 24 V | 120 sec. | 3 point | 6 Nm | 62 |
| ARA664 price >> | 12100800 | AC 24 V | 120 sec. | 3-point with add. off | 6 Nm | 62M |
 |
Electric actuators, Esbe series 90 actuators.Esbe series 90 compact reversing actuators are designed to control Esbe control valves of sizes DN 15-150, torque 5-15 Nm. These servo drives are supplied in three versions depending on the type of control signal: 2-point, 3-point or proportional, equipped with limit switches in the extreme positions and have the ability to adjust the working angle in the range of 30–180°. The Esbe 90 electric actuator allows you to control the valve in manual mode, while the position is displayed on the indicator disk. This series is available with both 24V and 230V power supply and different opening times. Esbe Series 90 actuators work effectively with VRG100, VRG200, VRG300, VRB100, F, MG, G, BIV and H series valves. |
| Model | vendor code | Email food | Time closing |
Control | An effort |
|---|---|---|---|---|---|
| 92 price >> | 12050600 | AC 24 V | 60 sec. |
3 point | 15 Nm |
| 92P price >> | 12550100 | AC/DC 24 V | 60/90/120 sec. | 0-10V/4-20mA | 15 Nm |
| 93 price >> | 12051300 | AC 24 V | 240 sec. |
3 point | 15 Nm |
| 94 price >> | 12051700 | AC 230V | 15 sec. | 3 point | 5 Nm |
| 95 price >> | 12051900 | AC 230V | 60 sec. |
3 point | 15 Nm |
| 95-2 price >> | 12052000 | AC 230V | 120 sec. |
3 point | 15 Nm |
| 95M price >> | 12052200 | AC 230V | 60 sec. | 3-point with add. off | 15 Nm |
| 95-2M price >> | 12052100 | AC 230V | 120 sec. | 3-point with add. off | 15 Nm |
| 96 price >> | 12052300 | AC 230V | 240 sec. |
3 point | 15 Nm |
| 97 price >> | 12052500 | AC 230V | 15 sec. |
2 point | 5 Nm |
| 98 price >> | 12052600 | AC 230V | 60 sec. |
2 point | 15 Nm |
 |
Esbe controllers of the CRB, CRA, 90C, CUA series.Modern Esbe controllers of the CRB, CRA, 90C and CUA series have been designed to provide more high level comfort and energy savings. The CRA series includes combined drives and constant temperature controllers with the ability to control the temperature from 5 to 95°C. CRB controllers with built-in actuator and user-friendly interface consist of an actuator and a display with a room temperature sensor, based on which the adjustment is made. ESBE CRB and CRA controllers are used with valves next episodes: VRG100, VRG200, VRG300, VRB100, G, BIV, H and HG, F<=DN40, Для клапанов серии F предназначены контроллеры CRA120, CRB 120. |
| Model | vendor code | Email food | Time closing |
An effort |
|---|---|---|---|---|
| CRA111 price >> | 12720100 | AC 230V | 30 sec. |
6 Nm |
| CRA121 price >> | 12742100 | AC 230V | 120 sec. | 15 Nm |
| CRA122 price >> | 12742200 | AC 24 V | 120 sec. | 15 Nm |
| CRB111 price >> | 12660100 | AC 230V | 30 sec. | 6 Nm |
| CRB114 price >> | 12661400 | AC 230V | 30 sec. | 6 Nm |
| CRB122 price >> | 12662200 | AC 230V | 30 sec. | 6 Nm |
| CRC111 price >> | 12820100 | AC 230V | 30 sec. | 6 Nm |
| CRC121 price >> | 12842100 | AC 230V | 120 sec. | 15 Nm |
| CUA111 price >> | 12640100 | AC 230V | 120 sec. | 15 Nm |
| CUA122 price >> | 12642200 | AC 230V | 120 sec. | 15 Nm |
| 90C-1A-90 price >> | 12601500 | AC 230V | 120 sec. | 15 Nm |
| 90C-1B-90 price >> | 12601600 | AC 230V | 120 sec. | 15 Nm |
| 90C-1C-90 price >> | 12601700 | AC 230V | 120 sec. | 15 Nm |
| 90C-3B-90 price >> | 12603600 | AC 230V | 120 sec. | 15 Nm |
| 90C-3C-90 price >> | 12603700 | AC 230V | 120 sec. | 15 Nm |
 |
Esbe thermostatic mixing valves VTA320, VTA370, VTA570Esbe thermostatic valves of the basic series VTA 320, VTA 370 have a high throughput and have enhanced functionality. Depending on the model, they can be used in household systems hot water and underfloor heating. The main functions of these valves are asymmetric flow direction and scald protection. The scalding protection is based on the automatic interruption of the hot water supply when the cold water supply is interrupted. Coupling, valve body - DZR brass, spool - brass, EPDM seal, PN=10, coolant temperature max. 95C. |
| Model | vendor code | Accession | Kvs, m³/h | Pace. range, °С | Weight, kg |
|---|---|---|---|---|---|
| VTA321-15 price >> | 31100300 | Rp 1/2" | 1,5 | 20 - 43 | 0,45 |
| VTA321-20 price >> | 31100700 | Rp 3/4" | 1,6 |
20 - 43 | 0,48 |
| VTA321-20 price >> | 31100800 | Rp 3/4" | 1,6 |
35 - 60 |
0,48 |
| VTA322-25 price >> | 31101000 | G 1" | 1,6 |
35 - 60 | 0,48 |
| VTA372-25 price >> | 31200100 | G 1" | 3,4 |
20 - 55 |
0,52 |
| VTA572-25 price >> | 31702100 | G 1" | 4,5 |
20 - 55 | 0,86 |
2-way control valve series VLA121
| Model | vendor code | DN | Kvs, m³/h | Accession | Weight, kg |
|---|---|---|---|---|---|
| VLA121-15-1.6 | 21150100 | 15 | 1.6 | Rp 1/2" | 1.0 |
| VLA121-15-2.5 price >> | 21150200 | 15 | 2.5 | Rp 1/2" | 1.0 |
| VLA121-15-4 price >> | 21150300 | 15 | 4 | Rp 1/2" | 1.0 |
| VLA121-20-6.3 price >> | 21150400 | 20 | 6.3 | Rp 3/4" | 1.2 |
| VLA121-25-10 price >> | 21150500 | 25 | 10 | Rp 1" | 1.3 |
| VLA121-32-16 price >> | 21150600 | 32 | 16 | Rp 1 1/4" | 1.8 |
| VLA121-40-25 price >> | 21150700 | 40 | 25 | Rp 1 1/2" | 2.7 |
| VLA121-50-38 price >> | 21150800 | 50 | 38 | Rp 2" | 4.2 |
3-way control valve series VLA131
| Model | vendor code | DN | Kvs, m³/h | Accession | Weight, kg |
|---|---|---|---|---|---|
| VLA131-15-1.6 | 21150900 | 15 | 1.6 | Rp 1/2" | 1.1 |
| VLA131-15-2.5 | 21151000 | 15 | 2.5 | Rp 1/2" | 1.1 |
| VLA131-15-4 price >> | 21151100 | 15 | 4 | Rp 1/2" | 1.1 |
| VLA131-20-6.3 price >> | 21151200 | 20 | 6.3 | Rp 3/4" | 1.3 |
| VLA131-25-10 price >> | 21151300 | 25 | 10 | Rp 1" | 1.5 |
| VLA131-32-16 price >> | 21151400 | 32 | 16 | Rp 1 1/4" | 2.1 |
| VLA131-40-25 price >> | 21151500 | 40 | 25 | Rp 1 1/2" | 3.0 |
| VLA131-50-38 price >> | 21151600 | 50 | 38 | Rp 2" | 4.7 |
2-way control valve series VLE122
| Model | vendor code | DN | Kvs, m³/h | Accession | Weight, kg |
|---|---|---|---|---|---|
| VLE122-15-0.25 | 21250100 | 15 | 0.25 | G 1" | 1.0 |
| VLE122-15-0.4 price >> | 21250200 | 15 | 0.4 | G 1" | 1.0 |
| VLE122-15-0.63 price >> | 21250300 | 15 | 0.63 | G 1" | 1.0 |
| VLE122-15-1 price >> | 21250400 | 15 | 1 | G 1" | 1.0 |
| VLE122-15-1.6 price >> | 21250500 | 15 | 1.6 | G 1" | 1.0 |
| VLE122-15-2.5 price >> | 21250600 | 15 | 2.5 | G 1" | 1.0 |
| VLE122-15-4 price >> | 21250700 | 15 | 4 | G 1" | 1.0 |
| VLE122-20-6.3 price >> | 21250800 | 20 | 6.3 | G 1 1/4" | 1.2 |
| VLE122-25-10 price >> | 21250900 | 25 | 10 | G 1 1/2" | 1.4 |
| VLE122-32-16 price >> | 21251000 | 32 | 16 | G2" | 1.8 |
| VLE122-40-25 price >> | 21251100 | 40 | 25 | G2 1/4" | 2.6 |
| VLE122-50-38 price >> | 21251200 | 50 | 38 | G2 3/4" | 4.3 |
3-way control valve series VLE132
| Model | vendor code | DN | Kvs, m³/h | Accession | Weight, kg |
|---|---|---|---|---|---|
| VLE132-15-1.6 | 21251300 | 15 | 1.6 | G 1" | 1.1 |
| VLE132-15-2.5 price >> | 21251400 | 15 | 2.5 | G 1" | 1.1 |
| VLE132-15-4 price >> | 21251500 | 15 | 4 | G 1" | 1.1 |
| VLE132-20-6.3 price >> | 21251600 | 20 | 6.3 | G 1 1/4" | 1.3 |
| VLE132-25-10 price >> | 21251700 | 25 | 10 | G 1 1/2" | 1.6 |
| VLE132-32-16 price >> | 21251800 | 32 | 16 | G2" | 2.0 |
| VLE132-40-25 price >> | 21251900 | 40 | 25 | G2 1/4" | 2.9 |
| VLE132-50-38 price >> | 21252000 | 50 | 38 | G2 3/4" | 4.6 |
VLA325 series 2-way control valve
| Model | vendor code | DN | Kvs, m³/h | Stroke, mm | Weight, kg |
|---|---|---|---|---|---|
| VLA325-15-1.6 price >> | 21200100 | 15 | 1.6 | 20 | 2.1 |
| VLA325-15-2.5 price >> | 21200200 | 15 | 2.5 | 20 | 2.1 |
| VLA325-15-4 price >> | 21200300 | 15 | 4 | 20 | 2.1 |
| VLA325-20-6.3 price >> | 21200400 | 20 | 6.3 | 20 | 2.6 |
| VLA325-25-10 price >> | 21200500 | 25 | 10 | 20 | 3.2 |
| VLA325-32-16 price >> | 21200600 | 32 | 16 | 20 | 4.6 |
| VLA325-40-25 price >> | 21200700 | 40 | 25 | 20 | 5.8 |
| VLA325-50-38 price >> | 21200800 | 50 | 38 | 20 | 8.0 |
VLB325 series 2-way control valve
| Model | vendor code | DN | Kvs, m³/h | Stroke, mm | Weight, kg | Replaces |
|---|---|---|---|---|---|---|
| VLB325-65-63 price >> | 21220100 | 65 | 63 | 25 | 23.0 | VLB225 21203100 |
| VLB325-80-100 price >> | 21220200 | 80 | 100 | 45 | 30.0 | VLB225 21203200 |
| VLB325-100-130 price >> | 21220300 | 100 | 130 | 45 | 45.6 | VLB225 21203300 |
| VLB325-125-200 | 21220400 | 125 | 200 | 45 | 55.0 | VLB225 21203400 |
| VLB325-150-300 | 21220500 | 150 | 300 | 45 | 71.0 | VLB225 21203500 |
3-way control valve series VLA335
| Model | vendor code | DN | Kvs, m³/h | Stroke, mm | Weight, kg |
|---|---|---|---|---|---|
| VLA335-15-1.6 | 21200900 | 15 | 1.6 | 20 | 2,5 |
| VLA335-15-2.5 price >> | 21201000 | 15 | 2.5 | 20 | 2,5 |
| VLA335-15-4 price >> | 21201100 | 15 | 4 | 20 | 2,5 |
| VLA335-20-6.3 price >> | 21201200 | 20 | 6.3 | 20 | 3,2 |
| VLA335-25-10 price >> | 21201300 | 25 | 10 | 20 | 3,8 |
| VLA335-32-16 price >> | 21201400 | 32 | 16 | 20 | 6,6 |
| VLA335-40-25 price >> | 21201500 | 40 | 25 | 20 | 7,5 |
| VLA335-50-38 price >> | 21201600 | 50 | 38 | 20 | 10 |
3-way control valve VLB335 series
| Model | vendor code | DN | Kvs, m³/h | Stroke, mm | Weight, kg | Replaces |
|---|---|---|---|---|---|---|
| VLB335-65-63 price >> | 21221100 | 65 | 63 | 25 | 19.0 | VLB235 21203600 |
| VLB335-80-100 price >> | 21221200 | 80 | 100 | 45 | 24.0 | VLB235 21203700 |
| VLB335-100-130 price >> | 21221300 | 100 | 130 | 45 | 32.0 | VLB235 21203800 |
| VLB335-125-200 | 21221400 | 125 | 200 | 45 | 46.0 | VLB235 21203900 |
| VLB335-150-300 | 21221500 | 150 | 300 | 45 | 61.0 | VLB235 21204000 |
 |
ESBE VLC125 seated control valvesESBE VLC125 2-way flanged control valves are used to control the flow of heating medium. The valves are made of ductile iron, which allows their use in heating and cooling systems with pressures up to 25 bar. The VLC125 series has flanged connections and is available in sizes DN15-DN50. The valves are designed for automatic operation in combination with ESBE actuators. | ||||
| VLC125-40-16 | 21302600 | 40 | 16 | 20 | 7.7 |
| VLC125-40-25 price >> | 21301100 | 40 | 25 | 20 | 8.8 |
| VLC125-50-38 price >> | 21301200 | 50 | 38 | 20 | 12.6 |
 |
Electric actuators for ESBE poppet control valvesLinear series ESBE drives in 230 V or 24 V version, with analog or pulse control. The actuators have different forces and are adapted to valves with different strokes. A separate line of actuators with a return spring is also presented. Depending on the model, valves equipped with such actuators can be normally closed or normally open. ALD121 22150500AC/DC 24 V |
2200 |
20 sec. | ALD144 22151200 | ||
| ALH134 price >> | 22220100 | 3-position/0...10 V | AC/DC 24 V | 900 |
15 sec. |
- |
| ALH234 price >> | 22221100 | 3-position/0...10 V | AC/DC 24 V | 900 |
15 sec. | - |
Three way mixing valve has a fairly simple device. It consists of a housing with two inlets and one outlet, as well as a specially shaped stem, on which a handle (for manual control) or an electric drive (for automatic flow temperature control) is installed. The rod is able to rotate along the vertical axis, blocking to some extent the inlet of hot or cold water, due to which a certain ratio of flows is created and, as a result, a mixture of a given temperature is obtained at the outlet. The body material of a three-way valve is most often brass alloy or cast iron. The stem is made of brass, cast iron or stainless steel.
Three way valve control is carried out with the help of an electric drive installed on the rod, which is supplied separately. The main characteristics of electric actuators are: the time of rotation of the rod by 90 degrees; the force with which the actuator is able to rotate the stem; electrical voltage and control signal (two-point, three-point, proportional). The electric drive receives a signal from the general house controller, which, based on the readings various sensors temperature, calculates the position of the three-way valve stem to obtain the desired temperature of the coolant at the outlet.
Selecting an actuator for a rotary three-way mixing valve. For sleeve mixing valves ESBE actuators of the ARA600 series are used, for flanged cast iron valves the ESBE 90 series is used. If as a mixer, then 3-point control or proportional control is necessary: 0-10V signal. Next, select the desired combination of stem rotation time and valve assignment. 60 seconds will be enough for domestic hot water supply, and for supplying coolant to radiators, most often, electric drives with a stem rotation time of 120 seconds are used. If it is necessary to control external equipment depending on the position of the valve (for example, turn off an unnecessary pump, etc.), we determine whether an auxiliary switch is needed. When all the technical characteristics of the electric drive are determined, it will not be difficult to choose from the presented models exactly the one that will perform all the specified functions.
