Pyrolysis boiler bourgeois 10. Pyrolysis boiler heating bourgeois-to the company teplogarant. With automatic adjustment

Heating pyrolysis boiler Bourgeois-K Standard-10 Russian manufacturer TeploGarant, single-circuit. solid fuel boiler Bourgeois-K Standard-10 Designed for space heating up to 100 sq. meters (ceiling height up to 3 m) in the country, in a country house, cottage. The boiler is equipped with a safety group. The operating time of the boiler from one tab with proper operation is 5-12 hours, the efficiency is from 82-95%. The boiler is made of all-welded steel and sheathed on top with a metal sheet with a heat-resistant coating. Basalt insulation provides thermal insulation of the boiler.

Bourgeois Standard boilers use chemically treated water as a heat carrier. The boiler can work in heating systems with natural and forced circulation of water. Boiler connection diameter 1 1/2". Chimney diameter 130 mm, it is recommended to use sandwich panels. If necessary, you can purchase an automatic draft regulator and a boiler safety group.

Fuel used: firewood, coal, fuel briquettes, peat briquettes; log length up to 45 cm.

The manufacturer's warranty is 30 months from the date of sale of the boiler, the service life is 10 years.

Specifications:

Equipment:

• boiler;
• passport;
• set of documents;
• flue pipe horizontal;
• grate.

Additionally, if necessary, the boiler is purchased:

• security group;
• automatic traction control;
• boiler maintenance kit;
• flue pipe vertical.

Characteristics

Delivery

Store purchases delivered total cost which is over 2000 rub. ( excluding delivery, for individuals). Minimum order amount for Legal entities 5000 rub.

Express order for buyers from regions: when paying for the purchase on the day of the order, we will immediately send the order to the selected shopping mall (check with the manager for details).

For pickup, you can place an order of any value.

Delivery in Moscow (inside the Moscow Ring Road):

• delivery of mixers KAISER - 300 rub
• delivery of mixers VIKO - 500 rub
• delivery other goods -500 rub

Pyrolysis (gas generating) boilers are a good option for heating if you have cheap solid fuel at your disposal or other energy sources are simply not available. The equipment runs on wood, coal, peat briquettes, but unlike conventional heat pumps, it has a higher efficiency - up to 92%. It is these effective systems that are produced by TeploGarant.

Pyrolysis boiler Bourgeois-K has a high performance due to the dual use of fuel energy. In addition to the main combustion process, its design also allows the emitted gases to be used, which are usually simply removed from the furnace through the chimney. Their combustion takes place in an additional chamber with a separate air supply. But the long-burning boiler "processes" the primary fuel in conditions of lack of oxygen. So firewood smolders more slowly, and gas generation is more efficient. The productivity of the boiler increases, as well as the time intervals between fuel fillings (up to 8 hours), and heating costs are reduced.

Many owners in their reviews note that the pyrolysis boiler after burning firewood and briquettes gives a small amount of ash. That is, the maintenance of equipment is simplified if its operation is configured correctly. But if the technology is violated, problems arise: a layer of tar and soot appears on the inner walls of the models, which is very difficult to remove. Why is this happening?

Installation Requirements

Judging by the reviews of owners and specialists, any Bourgeois-K pyrolysis boiler is demanding in terms of execution and proper connection of the chimney. It should be:

• made of stainless steel;
• insulated and sealed;
• made without horizontal sections and with a minimum of turns;
• have sufficient length to rise above the roof at least half a meter.

If all these requirements are not met, the boiler will quickly overgrow with soot from the inside, or even simply will not be able to enter the gas generation mode. That is, you will not get pyrolysis combustion, and Bourgeois-K will work like a regular solid fuel. As a rule, it is the failure to comply with the installation requirements that leads to inefficiency in the heating system, excessive fuel consumption and other problems. There are negative reviews, and the owners are thinking about buying other equipment.

The lineup

Having figured out how the pyrolysis boiler works, let's move on to a review of the Bourgeois-K devices. The entire range of equipment of a domestic manufacturer by purpose can be divided into two groups:

• Water heaters - as a heat exchanger they use their own double skin of the body. Some models can be connected to an additional DHW circuit.
• The pyrolysis air-heating boiler is devoid of a water jacket, and therefore physically cannot produce power exceeding 150 kW.

In turn, TeploGarant highlights the lines of household (up to 100 kW), industrial (up to 800 kW) and universal mobile boilers. All of them differ from each other not only in performance, but also in the installation method. We will consider the characteristics of the most popular models from these series.

1. Bourgeois-K Standard.

A family of compact and inexpensive floor-standing boilers for domestic use. Since they are considered budget, the equipment does not have a mechanical traction control that controls the opening of the damper. But the duration and efficiency of burning each fuel tab will depend on it. There is no thermomanometer, but TeploGarant offers to buy the missing elements of the system separately.

Boilers of the Standard series with a power of 10 to 30 kW are in great demand, as they are able to heat a private house with an area of ​​100-300 m2. The all-welded steel structure has an additional sheathing with a heat-resistant coating and non-combustible basalt thermal insulation. The equipment is non-volatile, because, unlike foreign analogues, it works without forced pressurization.

As for the functioning in the heating circuit, here the Bourgeois-K pyrolysis boiler heats the liquid in the system due to water jackets around the combustion chambers. So the body of the unit itself is a very efficient heat exchanger. The supply pipe is located at the top, the outlet of heated water is at the bottom.

2. Bourgeois-K Modern.

This series is more expensive and is represented by models that deliver power in the range of 12-32 kW. Unlike the Standard, here it is already possible to connect a DHW circuit to an additional heat exchanger. Just do not forget to revise the power characteristics at the same time, because part of the generated energy will be spent on water supply. The efficiency of Bourgeois-K Modern reaches 82-92%, and the design is supplemented with a draft regulator. This simplifies the management of work, since simple automation is able to control the air flow in the combustion chambers.

High performance products

Industrial heating boilers Bourgeois-K, presented in this series, produce a power of at least 50 kW. The maximum that these units are capable of is 800 kW (enough to heat an area of ​​​​8000 m2). We will not give a description of the principle of their work, since these models completely repeat the Modern household lines. The difference is only in the size of the firebox and, accordingly, in the price.

2. Hot air TVs.

The characteristics of the systems of the TV line are more modest: their operating range is 12-150 kW. Nevertheless, any long-burning boiler is capable of heating the air up to + 60-300 ° C, and fueling requires much less water models. TV units are in little demand, because they do not use the most efficient coolant. The cost of equipment is also quite high, but they are ideal for heating production facilities.

These are already automated systems operating from the network, since the pyrolysis boiler provides for forced air injection. But experts in their reviews recommend using simplified chimney options with TV, since the pipes in these models constantly need to remove soot and condensate.

3. Outdoor Tn.

Modular TeploGarant of the Bourgeois-K Tn series are mobile equipment for use, so to speak, at the place of demand. Although the weight of the units is rather big: the lightest T-12AMK pulls 400 kg, and the mass of a 100-kilowatt unit reaches 2 tons.

If somewhere outside the premises there is a need for economical and long-term heating, it is better to purchase a modular device. Pyrolysis solid fuels are used when it is not possible to make a mini-boiler room in the house. Models Tn cope with the work themselves, since the maximum configuration provides everything you need:

• circulation pump;
• water filter;
• defrosting protection - automatic coolant run if the pyrolysis boiler has not been turned on for a long time;
• stop valves;
• safety and mixing valves.

Like other series, Bourgeois-K Tn models are easily integrated into any heating system, regardless of its control features. Outdoor solid fuel boilers have an improved chimney design that provides a longer service life. Included with the equipment is a collapsible frame. It gives an aesthetic appearance, protects from weathering, and the walls and roof of the "booth" are covered with thermal insulation.

People's reviews

“My first disappointment with the pyrolysis Standard was flimsy grates. They literally burned out in a season. From what I understand, many people have this problem. Most likely, it was necessary immediately after the purchase to replace the grille with something more serious, but I did not want to get into new equipment. Otherwise, it is a normal solid-propellant apparatus, although the price of the Bourgeois-K model clearly does not correspond to the functionality.

Valentin Basov, Nizhny Novgorod.

“For a long time I suffered with cleaning the boiler - almost everything was clogged with tar from the inside. And climbing into Bourgeois-K is not an easy task (those who have tried it will agree with my opinion). It’s good that I came across a review where an intelligent person advised to insulate the boiler room under a solid fuel apparatus. Oddly enough, but the problem was solved. Probably, due to the low temperature of the air entering the pyrolysis burners, soot was released.

Nikolay, Moscow.

“Those characteristics that the manufacturer claims are probably achievable on Bourgeois only when using ideal fuel (very dry, with good calorific value). But I don’t want to spend money on factory briquettes, and for safety reasons I decided to buy a long-burning boiler with a power margin of 25%. Now the house is warm enough, but not hot, so I advise you to focus on this indicator. Buying a model, of course, will be much more expensive, but it's better than freezing in winter.

Dmitry, St. Petersburg.

“I have been using the 20-kilowatt Bourgeois-K Standard for two years, and the longer it goes on, the more I like it. Although the first winter I could not adapt in any way: I had to clean it all the time. Now I have got used to it, I have adjusted the operation of the boiler, and there are no such problems. From myself I will give advice: lay firewood not only dry, but also large enough, then really more often than after 8 hours you won’t have to throw it up.

Oleg Ponomarev, Syktyvkar.

A pyrolysis boiler is a real find for those who live in private houses and summer cottages where there are often interruptions in the supply of gas and electricity. This unit is completely autonomous, does not require connection to either electrical or gas distribution networks. The device has already earned wide popularity and recognition due to the fact that it is optimally suited for operation in the Russian climate.

The modern stove "Bourgeois-K" is essentially similar to the well-known stoves-potbelly stoves of the beginning of the last century. Any solid fuel can be used as fuel for the stove - firewood, coal, pellets and briquettes, depending on which fuel is more affordable and cheaper in your case.

But the principle of operation of this device is fundamentally different from other solid fuel boilers. During the operation of the boiler, combustion products saturated with carbon monoxide are not emitted into the atmosphere, since the design provides for their afterburning system.

By design, the device is a one-piece unit, consisting of a two-chamber furnace and a water circuit. The built-in temperature sensor allows you to accurately set the temperature regime with an error of up to 3 degrees. One load of fuel is designed for 15 hours of operation of the device.

Delivery Card

Delivery in Moscow within the Moscow Ring Road

The cost of delivery of goods by our auto courier is from 1500 rubles.

Delivery in the Moscow region

In the Moscow region from 1500 - 5000 rubles.
In other areas 45 rubles per kilometer.

Attention!!!

Delivery of goods on Fridays, Saturdays and Sundays is cheaper. Due to the specifics of our products, our customers ask for delivery on the WEEKEND “while everyone is at home”, we collect orders and the driver can close up to 10 points per day. Details from our managers.

Note!

The cost of delivery in Moscow and Moscow Region includes the driver's assistance when unloading goods from the car body. If necessary, you can arrange an additional loader to bring the goods at a cost of 2000 rubles.

Delivery to other regions of Russia

In other Russian regions, the delivery of our products can be made with the involvement of our partners - transport companies. Delivery to the regions is carried out according to the following scheme:
The buyer places an order for the product.
Within 48 hours after the receipt of money for the goods, our company ships to the transport company, after which the customer is sent a bill of lading number, which can be used to easily track the progress of the order.
Upon the arrival of the goods in the city of the customer, the operator of the transport company contacts him, reports the cost of delivery and agrees on a convenient time for the delivery of the goods or pickup. You can find out the exact cost of delivery to your city on the website of transport companies by entering dimensions and weight. We are actively cooperating with PEK http://pecom.ru, Business Lines http://www.dellin.ru/ (when filling out, the recipient's passport details are required) or any other companies of your choice.

Pickup

We offer self-delivery of products from our warehouse at the address: Moscow, Bulatnikovskaya st., 20, entrance No. 2.
Self-delivery and loading of goods are free of charge.

Note!

When self-delivery of products on the buyer's transport, we strongly recommend that you study in detail the corresponding drawing on the website and carefully measure the parameters of the doorways of your car in advance. This must be done to avoid damage to the car interior, because due to the complex geometry and protruding parts of the product made of 0.5–4 mm steel, it is very difficult to carry products into a car door that is too small!
Loading of products with the help of a loader is carried out in trucks on weekdays from 9:00 to 18:00. Our company delivers goods with an accuracy of half an hour, provided that the customer provides complete and accurate information about the time of delivery of the car a day before.

Bourgeois-K STANDARD-10- This is a model of a pyrolysis boiler designed to service premises with a large area. The main advantage of the device is that it does not require an electrical connection. Wood is used as fuel. The boiler is connected to the water supply system and provides efficient space heating.

Features and Benefits:

• Reliable construction. Like all Bourgeois solid fuel boilers, this unit is made of high-quality durable steel, designed for continuous use. Installation and operation of the boiler will not cause difficulties, it is equipped with everything necessary (supplied with grate, thermometer, pressure gauge) for quick installation and efficient operation. The cast-iron sectional heat exchanger is resistant to corrosion - its service life, declared by the manufacturer, is at least 15 years.
• Autonomy. Bourgeois-K STANDARD will allow you to create a full-fledged non-volatile heating system without any difficulties - the installation of the boiler does not require special approvals and permits, it functions without being connected to electricity, which means that its performance will not be affected by possible voltage drops.
• Open combustion chamber. The practicality of use is ensured by a stationary vertical chimney, through which combustion products are removed due to natural draft. The well-thought-out design of the boiler Bourgeois-K STANDARD and the special process of fuel combustion made it possible to achieve a significant increase in time with one tab (8-12 hours), compared with most solid fuel boilers of a similar class. The efficiency of the unit reaches 92%.
• Versatility and economy. You don't need expensive fuels to create a comfortable atmosphere in your home. The boiler runs on peat, coal, firewood, wood briquettes, pellets and, importantly, even wood waste. Pyrolysis technology allows to reduce the consumption of fuel used up to 3-5 times, compared with analogues.
• Scope of delivery: boiler, grates, technical data sheet

To create comfortable climatic conditions in private homes and commercial premises, a series of STANDARD single-circuit pyrolysis boilers from the well-known manufacturer Bourgeois-K was created. Productive boilers do not require an electrical connection and are distinguished by their efficiency. Convenient control system and reliable protection during use ensure the safe operation of the boilers.

Dear company "BURJUI-K"

Finally, we have put your T-10 pyrolysis boiler into operation. An ordinary village house (log house) is located in the Kostroma district in the village of Kalinki.

Since the construction of the house for heating, the Russian stove has served us faithfully, which still stands today. Many of our friends have long had wood-fired heating boilers, but when talking with them, it was not clear why they needed it at all - the same amount of firewood is burned per season, you need to buy pipes, radiators, make sure that the heating system does not defrost.

I don’t remember from whom, but I heard that there are pyrolysis boilers that work much more economically than conventional solid fuel boilers. Having estimated that 8-10 kW of the boiler would be enough for our 80 meters, I began to "look closely" at what they offer in specialized stores. Almost immediately I came across boilers with the unusual name "BURZHUY-K". And after the seller told me that imported pyrolysis boilers are 2 times more expensive (and your boiler is also expensive for my budget), and they also need electricity to work, I thought what to look for further, just waste time.


We have not demolished the stove yet, but put the boiler in a separate room at the entrance. It didn’t take much to make the wiring, since now there is polypropylene and you don’t need to cook anything. I had to tinker with the chimney, because I was told that it must be insulated and located vertically up from the boiler. I also installed a circulation pump, although I was not advised. But it’s more convenient, the house warms up by 10 degrees in less than an hour!

This season we stoked with ordinary boards, so-so firewood, I'll tell you. But literally on the second or third day, having adapted to the operation of the air damper, we left for 7 hours from one bookmark and this is on pine boards! In the summer next year we are planning to buy good birch firewood, I am sure that the boiler will work on them even longer than the indicated 8 hours!

We are very satisfied with the boiler, for which we thank you very much.

Sincerely, Oleg Vitalievich Zaemov.