Forms of wooden platbands for windows. Wooden platbands for windows - carved patterns for framing windows. How to make carved platbands

Finishing windows with platbands is an ancient practice. Woodcarving - at one time, was one of the most sought-after professions, and now it has moved into the category of applied art.

Our ancestors believed that evil spirits could enter the house through window and door openings. Therefore, the platband served not only as a decorative element, but also as a talisman, and each applied ornament and pattern on the carved platband carried a certain message. Moreover, each region had its own traditions.

The value of the carved elements on the platbands is interesting

Wings emphasize strength.
The bird is an element that unites all times.
The sun personifies life and energy (usually located on the kokoshnik).
The snake symbolizes wisdom and fertility.
The cross demonstrates the desire of the owners for harmony between the material and the spiritual.
Vegetation shows a sense of unity with nature.
Earrings testify to the hospitality of the owners of the house.

Wooden architraves rare in cities high-rise buildings. But in private construction they are again in demand today, making modern houses more stylish and unique. They emphasize the desire of many to revive traditions in decor.

Today, window casings perform a completely different function and are made not only from wood. Platbands made of metal, plastic (PVC), plywood, laminated MDF are common. As for the latter, MDF or plywood trims are not intended for external window framing, only for interior design door and window openings.

It should be noted that the correct name for the external decorative window framing is cashing. The platband is installed indoors.

Functional purpose of window frames

Advantages

decorating window openings. For example, a platband can visually stretch a low house, or expand a narrow one;

the opportunity to express your individuality or give the house the style of a certain era or region;

emphasize the style of the house and allow you to combine all the buildings on the site into a single architectural ensemble;

protection of the gaps between the window and the wall from dust and moisture;

reduction of heat loss at the junction of the window frame and the wall;

reducing the level of external noise;

sometimes they are the only possible design option. For example, platbands on the windows of a wooden house or a log house can only be made of wood. Otherwise, the whole color of such a structure will be lost.

Flaws

A wooden, especially a carved platband has a number of disadvantages, or rather features:

dependence on atmospheric influences. Frequent drops temperatures, moisture, ultraviolet, all these factors cause damage to the casing;

dependence on quality processing. Right choice species, careful impregnation of wood, timely replacement of parts, and painting, all this can extend the life of the product. Otherwise, the wooden casing will soon become unusable;

the complexity of combining with modern plastic windows. Wooden platbands are not always suitable for plastic windows.

Quite often there are plastic windows framed with wooden trim, as shown in the photo above. A somewhat unfortunate, controversial decision. In such cases, you must either install wooden double-glazed windows(or windows laminated to look like wood), or paint the trim white.

A more harmonious finish is in the photo below.

Types and types of platbands on windows

The manufacture of platbands for windows depends on the type and method of installing the platband.

Allocate simple platbands for windows - flat and standard. More beautiful, are made on special equipment. The most beautiful window trims are, of course, carved ones.

The method of manufacturing and the cost of the platband is affected by the method of their installation:

telescopic. Will change to a greater extent in the frame doorways. Special L-shaped protrusions of such a casing go into the grooves of the box. Such a connection is more complex, but beautiful;

overhead. Attached to window frame using nails or special glue.

It is worth noting that the platbands are of a wide variety and are often complemented by shutters.

How to make platbands on windows - the choice of material

1. Type of wood

For the manufacture of the casing, it is better to use such wood as beech, oak, birch, linden, alder, pine, walnut or even fruit trees.

The choice of breed will be influenced by the proposed method of manufacturing the casing.

Hardwood architraves (beech, oak, ash) are very reliable, but this material is very hard. To cut a pattern on them, you need to make a lot of effort and spend a lot of time.

Platbands from soft-leaved species (linden, alder, aspen). soft material wood, it is a pleasure to work with him. But they, with improper processing, absorb moisture and quickly become unusable.

The best option is hardwood (birch) or conifers(pine). Hard enough to be used outdoors, they allow accurate cuts.

Cherry or apple tree is used to make small decorations that are superimposed on the main pattern.

2. Patterns for platbands on windows - drawings and templates

If decorative carving is supposed, you need to decide on the pattern. Depending on skills, you can choose a light or very complex ornament for platbands. Below are some drawings of carved platbands for windows. Patterns can be copied in whole or in part, bringing something from yourself into the pattern.

Sketches with interesting ornaments and patterns are placed on a separate page, by going to which you can
.
It also describes how to make stencils for making templates with your own hands.

It is desirable that all windows are decorated with the same platbands with the same thread. Therefore, when choosing a pattern, keep in mind that it will need to be repeated several times. It shouldn't be too fancy. Especially if you are a beginner. It is better if your pattern contains round holes (they are easy to drill) and large elements. It is worth noting that small elements are not only difficult to manufacture, but also become unusable faster than others. Therefore, they will require periodic replacement.

Another important point- this is the obligatory presence of a slope at the top of the casing. Otherwise, snow will accumulate on the surface of the tree, which will inevitably lead to its destruction. A slope of several degrees is easy to perform, it will divert water down.

3. Tool

hacksaw;
knives;
chisels of several types (clukarzy, corners, flat, curved, semicircular, caesars);
sanding paper;
jigsaw;
drill;
milling machine (if available)

4. Patterns for platbands - stencils and sketches

To make the pattern the same on all windows, it is recommended to make a sketch or stencil.

You need to place the drawing on the workpiece correctly. Elements should be located along the grain of the wood. This will prevent thread cracking.

Sections of the pattern where you need to make cuts can be marked with color.

5. Making carved platbands for windows

There are two ways to do wood carving:

cut wood carving. The pattern cuts through the entire casing and, like lace, beautifully and elegantly frames the window opening.

overhead wood carving. This method is much easier themes that a thinner workpiece is used for work, which is easier to work with. With the overhead method, individual elements carvings, which are then folded together on a solid board. Thus, it is possible to ennoble simple platbands on the windows.

The beauty of openwork window trim lies in the use of contrast. A lighter carved element on a dark background is more common.

Do-it-yourself wooden platbands for windows - instructions

measurements are taken from the window;

All work is done on dry lumber. The height and width of the board depends on your preferences, but the thickness should be at least 30 mm for a slotted thread and at least 10 mm for an invoice;

blanks are cut out;

from the inside of the clypeus, to a depth of 1-2 mm. wood is selected. Leave edges on the edges. This approach will provide a tighter fit of the casing to the frame;

the pattern applied according to the template is cut out. At the same time, holes can be drilled with drills of different diameters, and cuts can be made with a jigsaw. The insertion point of the jigsaw is indicated by a drilled hole. So the cut will be more beautiful;

slots and holes are processed with sanding paper. If there are non-through holes in the pattern, then wood dust must be removed from them. This is done using a vacuum cleaner.

6. Fastening carved elements

Details made with overhead carving are attached to the wide base of the casing on nails. It is desirable that the nails were without caps. More reliable connection can be achieved by applying glue to the pattern from the wrong side. Masters advise not to use self-tapping screws for the connection, so as not to damage the junction.

7. Installation of trim on windows

It is not enough to create a beautiful product. You also need to know how to install platbands on windows correctly.

Proper installation of platbands on windows is the key to their long-term operation and aesthetic appearance. For fastening, you can use the following methods:

deaf spike. Such spikes are installed in the casing, and holes are drilled in the frame for them. A little glue is applied to the spike and inserted into the groove. This mount is the most difficult, but it protects the installation site from moisture and does not spoil the appearance of the product;

through spike. More simple and less reliable way. This system of spikes provides fastening. But, the spike must be installed where it will be least noticeable and additionally protected from moisture.

The listed methods are used if platbands are installed on wooden windows.

In the event that the installation of platbands on plastic windows is required, special glue (liquid nails) is used. This method will not violate the integrity of the frame.

In order for the carved platband to please you for as long as possible, you need to take care of its processing. To do this, the wood is primed, varnished or painted.

Outcome

The desire to follow the traditions of the ancestors is commendable. The revival of carved art is most welcome in the conditions of modern urbanization. The special flavor of Russian carving will not lose its relevance. With some effort, you can make carved wooden platbands with your own hands. Yes, the work is difficult and painstaking, but it's worth it. Plus, you can save a decent amount, because. if you order the manufacture of a set of carved architraves for one window in the workshop, it will cost 5-15 thousand rubles.

Carved wooden architraves on windows - photo with examples

Carved wooden architraves on windows - 2 windows

Putting platbands on the windows with your own hands is the easiest and most cheap way to give the exterior of the house an individuality and express its character, which has survived from antiquity to the present day, see fig. In the old days, an illiterate newcomer, guided by the architraves, could find the dwelling of the necessary master, specialist, official, office or hot spot. In our time, the functions of window trims are predominantly decorative, but the patterns on them have not lost their significance, see below.

Story

Architraves on the windows of the dwellings of the peoples who practiced mass wooden architecture appeared simultaneously with the windows “glazed” with fish bladder and mica. Initially, their purpose was purely functional: to cover the insulation and wind insulation - caulk - in the gap between the window and the frame.

Architraves with sacred patterns were first noted among the ancient Celts, but the true flowering of the art of creating carved architraves is associated with the unification of the resurgent Russia under the rule of Moscow and the overthrow of Mongolian yoke; Russian masters in wood carving knew no equal. The Bolsheviks wrote down the architraves in the remnants of the bourgeoisie and declared a war of destruction on them, but at present, artistically designed window architraves are experiencing a rebirth.

This article is intended, as far as possible, to satisfy the reader's demand for how to make beautiful trim on windows with your own hands, how to give them artistic expressiveness and put in place.

Design

Kinds design window platbands are shown in the photo. Overhead platbands (pos. 1) are attached to the wall; plug-in, or box-shaped (pos. 2) - to the slopes of the window opening of windows (this is better) or in the window frame (worse). Overhead platbands are placed on the windows flush with the wall; inserted - on windows in niches.

According to the possibilities of isolation and protection of the window insulation, the platbands are divided into framing (pos. 3) and portal, pos. 5. The platband-portal is often supplemented with a visor. The platband-frame practically does not protect the window insulation/seal from blocking and is placed on windows from the inside or on windows facing under a canopy, for example, on a veranda.

Installation

Traditionally, the installation of platbands is carried out by fastening to a wall or window slopes. Now for this it is best to use self-tapping screws (4.2-6) x (80x150), if the wall is not wooden - in propylene dowels. Attachment points are placed as evenly as possible at the rate of 1 point per 5-7 square meters. dm surface of the clypeus, outlined by its outer contour. When attaching to slopes, the attachment points are placed in a row with a step of 150-300 mm (depending on the mass of the casing, which, in turn, depends on its artistic performance, see below) along the center line of the protruding part of the bearing (base) wall. Holes with fastener heads are either hidden in the tie of the upper levels (see below), or they are puttied and painted over with the main tone.

Platbands-"telescopes"

AT modern houses, outside insulated and sheathed with siding / clapboard, windows are often flush with the base wall, otherwise the window will generally sink into the wall. In this case, there is nothing left to fix the casing, except for the window frame. In such a case, the so-called. telescopic architraves, but quite reliably they will hold only on windows in reinforced frames designed for regions with a harsh climate; frame material - reinforced PVC or modified wood (see below), does not really matter.

All the "telescopicity" of the platbands comes down to installing them on additional elements cut in place, rigidly connected to the window frame. The most reliable are the platbands on the slotted extensions, on the left in fig. Telescopic architrave systems with a groove in the frame (e.g. on the right in the figure) are not suitable for outdoor installation: a gust of wind can break the casing, breaking the frame at the same time.

If the window frame is modern wooden or PVC with a groove for the key, telescopic architraves can be installed to such a window without removing it. If a PVC window with a wall with an inaccessible base surface is not intended for installing a trim, then there is no other way out than to remove the window, put a box under the trim in the opening, attaching it to the base wall, and reinstall the window. In this case, the platband box must have grooves that fit into the places where the window anchors are attached.

Wood for architraves

Painted, carved and about carved architraves wooden platbands (see below) are made from high-quality straight-grained pine or larch without knots. The thickness of the boards is from 30 mm. Knotty spruce is not good: outside, the knots will soon outline under any coating, and there they will begin to fall out.

Carved architraves require wood that is suitable for carving - fine-grained, viscous, fairly dense - and resistant to outdoor conditions. Top Breeds for this - oak and beech, but they are quite expensive. Linden, alder and aspen are suitable after 2-fold impregnation (the first impregnation - until seepage through) with a water-polymer emulsion; oil, silicone and mineral (borax solution) impregnation from decay does not increase the viscosity and surface strength of wood. Birch is absolutely unsuitable: from the outside, no impregnation will save it from being attacked by fungi.

Note: a magnificent carved platband is very simply obtained from the cheapest plywood, twice impregnated with a water-polymer emulsion. For more information about plywood trims, see the end.

Shield for platband

Sometimes one board is not enough for the desired width of the casing, but fastening 2-3 boards into a shield with steel fasteners in this case is blunder. wooden shield on steel outside, it will soon split, then the fasteners in the gap between the casing and the wall will rust and crumble. But it is also impossible to assemble boards into a shield for a casing in a furniture way without additional reinforcement, because a cabinet or table is not designed to withstand strong winds, rain and snow. They rally the shields from the boards for the platband. see also fig. below:

Spread on a table or workbench polyethylene film with a 3-fold margin for the width of the future shield;
The boards are folded into a bag on a film and glued with PVA or waterproof wood glue;
When the glue sets, the package of boards is wrapped with a film;
Plywood cheeks are placed under the package in the film and put on it;
The package with cheeks is tightly wrapped with a linen cord;
Pairs of wooden wedges are knocked under the turns of the cord so that the cord is pulled as tight as possible;
After 2-3 times of complete drying of the glue, the cord, cheeks and film are removed;
From the underside (back side), the shield is additionally reinforced by stuffing 40x20 bars laid flat across the boards.

Note: boards are assembled into a package, observing the rules for alternating the orientation of the layers of wood, as well as furniture boards, see on the left in fig.

Not a tree

Unpainted wooden platbands look unimportant on any wooden wall, even if its material well imitates the colors of the tree. In such cases, it is better to either put simple PVC platbands complete with the window (on the left in the figure), or more expensive polyurethane platbands, the rest of the pos. in fig. Polyurethane platbands can imitate external stucco and painted multi-level cut-out platbands (on the right in the figure); the latter option can be prefabricated on glue from elements purchased separately.

Arts are different

Artistically designed window trims can be made, firstly, framed (pos. 1 in the figure below) or in a salary, pos. 2; functionality, i.e. window seal protection, both are the same. The platbands in salaries are the most informative and sacrally significant, which we will discuss below. Frame platbands, in addition to functionality, are mainly decorative.

From the point of view of woodwork, frame platbands, in order of increasing complexity, are divided into:

Cut-out - boards or shields are cut along the figured contour, pos. 3.
Slotted, pos. 4 - a pattern is cut out in the board / shield. They are relatively rare, because. fragile.
Slotted multi-level, pos. 5, up to 5 or more levels - sawn patterned modules are attached to a solid plain or cut-out base. In addition to strength, multi-level platbands are good because powerful fasteners to the wall are hidden in the tie of the upper levels, and the upper levels themselves can be fastened with small, inconspicuous fasteners.
With overhead relief details, pos. 6. In our time, technologically, they may turn out to be simpler than cut ones, because. on a tree it looks quite appropriate acc. painted purchased polyurethane relief.
With low convex thread, pos. 7 - they look great, but very laborious, you need to choose a lot of wood.
With low depressed thread, pos. 8 - the complexity is less, but the work is more difficult, because very difficult to correct visible flaws.

Note: on pos. 8 shows a casing with the so-called. pillow carving - the corners of the protruding fragments are smoothed. The platbands with pillow carvings look almost as luxurious as those with a convex one, but they are almost as labor-intensive.

As for the colorful decor, the platbands can be painted, pos. 3, unpainted lacquered, pos. 4, or natural look, pos. 7, painted in different colors by levels, pos. 5, 6, and painted entirely, pos. 8. Almost exclusively carved platbands are painted, and natural - from especially resistant wood species (bog oak, etc.)

About the sculpture of architraves

In general, platbands with sculptural carvings, high (round, semicircular) and low, see Fig., could not be mentioned in an article with the tag “do it yourself”. Anyone who knows how to cut wood like that does not need explanations on how to make and put a window trim. But there is one point, little known to experienced craftsmen.

MDF - have you heard? In fact, this is tracing paper with MDF, medium density fiberboard, medium density wood board. The well-known fiberboard is low density fiberboard, low density wood board. And there is also HDF, high density fiberboard, fiberboard high density, we have little known due to the relative high cost. All these materials are quite environmentally friendly, because. obtained by hot pressing wood pulp without synthetic binder, the difference is only in the temperature and pressure of the press.

So, HDF, firstly, subject to 2-fold impregnation with a water-polymer emulsion, is resistant to outdoor conditions. And in terms of viscosity and density, it is suitable for fine woodcarving, but much cheaper than wood species for artistic carving and is produced in large absolutely homogeneous plates. HDF cuts not as well as walnut, but quite similar to oak and beech.

Salary

A complete set of elements of the Russian casing frame is shown on the left in the figure; the names of its parts are also given there. In specific products, certain modules may be absent, because. they overlap in importance.

The teremets with a kokoshnik and an apron have the main sacred meaning; the informative and functional load is carried, as a rule, by heads and overhangs. A tympanum with an apron usually protects from evil, and a kokoshnik with a frill, robes and a window sill are talismans that attract good. Specific figures for both were in old Russia, not only in every village, but almost in every house. In common for good, a circle with radii, rays or wings (the Sun), a bird (the firebird is the heiress of either a phoenix or a simurgh), a horse is a symbol of prosperity and social status, and a fish is primordial positive symbol Christianity. Universal charms from evil - a stylized floral ornament based on useful plants.

Note: the wing, as part of a bird that carries it in the sky, has the same sacred meaning as a bird. The Winged Sun is a good messenger. The Christian six-winged seraphim is nothing but the pagan winged Sun with an angelic face.

In the European-Oriental tradition, the universal symbols of goodness are the cartouche and the medallion. The medallion, of course, is the Sun, and the cartouche is either a stylized tree of life, or the phoenix bird is on it. Both do not contradict both Christianity and ancient Slavic beliefs. In Russia, they even undertook to combine the cartouche with the medallion, for which the teremets of the casing was cut, on the right in fig.

amulets

In the town highest value had a talisman on a tympanum and a kokoshnik, they are from damage, evil eye etc. The templates of the upper amulets of the window trim of a city house are given in fig. The top one has a cartouche, stylized birds, fish (the tails are clearly visible) and at least 12 other positive elements visible to a knowledgeable person.

The lower one is more for adherents of primordial beliefs. There, in a stylized solar circle, there is some ancient Slavic deity. Which one is not quite clear, but definitely good. Good tramples evil in the form of a snake: note that the lower elements of this board are not symmetrical.

In the countryside, and even more so in the forest, it was considered necessary to protect oneself equally from the upper (evil eye, slander, etc.) and lower evil: creeping reptiles and forest evil spirits. The platbands with a weighted or heavy apron were called to help in this, equal in height or greater than the upper amulet. An example of the upper and lower boards of the platband with a weighted apron country house given in fig. You can try to decrypt it yourself.

Ornament

Ornaments of window frames are usually built on the basis of the so-called. rapports - elements that are self-adjoint in one direction, forming a linear seamless pattern, on the left in fig. By changing the size and number of rapports, you can quickly develop a slotted casing for any window. By combining just 2-3 rapports, it is possible to get big variety patterns; stencils of several types of fully conjugated rapports are given on the right in fig.

The rapports of the pattern do not have to be completely matched with each other, this will make the pattern visually more complex and effective. For example, the pattern of the top row on the next. rice. is built by flipping "upside down" each subsequent fragment relative to the previous one. The rapports of other ornaments in fig. are conjugated either along broken or curved lines (marked in red).

Note 5: decorating the corners of frame architraves with end elements common to rapport lines often turns out to be difficult, there just isn’t enough space at the corner. In such a case, follow. rice. templates of isosceles ends of the ornament are given. Turned by 45 degrees, linear ornaments can also be built from them. These details are best cut out of plywood, see at the end.

Thread

If you want to make unique carved architraves for yourself, then the main difficulty along the way is the selection of a tool. In addition to flat chisels of 5, 10, 16/18 and 24 mm (pos. A in the figure), you will need oblique ones of the same widths, but always in pairs - right and left, pos. B. Corner chisels will be enough 6, 12 and 18/24 mm at an angle of 90 degrees, pos. AT.

Much more semicircular chisels, pos. G: to start with 4, 8, 13 and 16 mm normal, with a gutter depth equal to its width. 4 and 8 mm chisels will also need deep ones, the so-called. U-shaped, and 13 and 16 mm are also sloping.

For fine artistic carving, you will also need curved chisels-clucarzy normal, sloping and angular at 60 degrees, pos. D1, D2, D3. For pillow carving, you can not do without reverse cranberries for smoothing corners, pos. D2a. The minimum required sizes are marked on pos. D red.

You need to look for chisels for wood carving in art stores, but buying all the initially necessary randomly will be very expensive. It is better to immediately take a set for woodcarving, but not for a fine sculptural of 40-60 items (pos. E), it will not cost less, and at first it will simply be incomprehensible to you what to do with most of these tools. You need to take a set for beginners from 12-15 items, pos. Well, it will only be necessary to buy knives-jambs at 90 and 60 degrees (shown by arrows in pos. E). With tools from such a set, it will be possible to ennoble cut-out overlays and make rather thin geometric carvings, see Fig.:

Note: if you have the opportunity to use a manual milling machine for wood, then a cut-out or slotted platband can be significantly improved visually by putting a figured chamfer along its edge with a shaped cutter - mug, see fig. on right.

Plywood

The worst packaging plywood, after 2-fold impregnation with a water-polymer emulsion, becomes suitable for medium-level artistic carving, and when painted with water-dispersion paint and varnished with acrylic lacquer, it turns out to be resistant like oak from the outside. But more importantly, the strength of plywood, unlike boards, is almost equal in all directions. The minimum thickness of 30 mm required for the casing is 5 layers of plywood and 5 levels decoration clypeus. In this way, it is possible to make plywood platbands, visually almost as good as the masterpieces of the masters of the past; compare left and center in Fig.

Antique carved platbands, modern plywood platband and jigsaw for cutting plywood

However hand jigsaw sawing so much plywood for a long time and inaccurately will work, and a joiner's electric jigsaw for such thin lace is unacceptably rude. We need a jigsaw machine, it is also a stationary electric jigsaw, on the right in fig. Branded jigsaws are expensive, but those that are not inferior to them can be made with your own hands from a manual electric jigsaw (which does not deteriorate from this and remains suitable for basic work), an old sewing machine, and other methods, see for example. track. video.

Video: homemade jigsaw for woodcarving

Note: machines from sewing machines the safest and may not be electrified if the machine is foot-operated. In this case, the frequency of the file moves is regulated elementarily without any electronics: you just need to jerk your feet more or less often.

October 14, 2016
Specialization: master in the construction of plasterboard structures, finishing work and styling floor coverings. Installation of door and window blocks, facade finishing, installation of electrics, plumbing and heating - I can give detailed advice on all types of work.

Carved architraves on the windows in a wooden house have been a traditional option for decorating houses for several centuries; earlier, one could even judge the wealth of the owners by them. Nowadays there are many modern materials, but wood products have not lost their relevance and are still popular.

And if you have wooden house, then the facade should definitely be decorated with a beautiful frame, I will tell you what types it is, and you need to choose the option that suits best.

Types of platbands

I will only talk about wooden products, since it’s not serious to put plastic trim on a house made of wood, it’s like clinging cheap stickers to expensive car: although they are beautiful, they will spoil the impression in any case.

There are several product options, I will not say that one of them is worse or better, each type fits a certain style of the structure and it is important to choose the best solution in each case.

Option 1 - finished products

The industry produces standard platbands, the surface of which can be of different configurations:

The form	Description
straight slats	The simplest option, which is high-quality processed planks with perfectly even corners. These products are well suited for wooden houses in a modern style, the clarity of the lines allows you to well emphasize the beauty of the tree, and at the same time the frame does not look outdated
Elements with rounded edges	Such products are often used inside houses and apartments when decorating doorways, but they can also be used outside if they are suitable for decoration. AT this case you just need to define optimal width elements to make the platband look the best
Semicircular products	This option differs in that it is a convex surface, which is well suited in cases where you need to imitate a log or beam. Products should be chosen carefully, since on oval elements all flaws are very visible. Again, this design is more suitable for modern buildings.
Figured platbands	The most interesting of the standard options, the surface in this case is not straight, but figured, and the profile can be very different, as well as the width. This is a kind of compromise for those who do not like other products, but the simplicity of even elements is also not very pleasant. Another plus is the ability to manufacture original products to order, their price will be higher, but you will get a non-standard frame.

As for the workflow, it is simple, because you buy finished products and can immediately put them to work. The advantage of this option is that the platband can be used both as an external and as an internal one, while the rest are intended only for use on facades.

The instruction for the work looks like this:

First of all, you need to take measurements to determine how many elements and how long you need. It is better to write down all the data, especially if there are a lot of windows, since you can confuse something and in the end it turns out that you do not have enough material, or, conversely, there is too much of it;
When buying, keep in mind that the products go standard length(usually 2.2 meters), so you need to calculate how many elements are needed, because during work, waste is inevitably generated and sometimes there can be a lot of them. Most often, pine products are sold, but if finances allow, look for a larch trim, it is much more durable;

When choosing, pay attention to the surface: it should not be damaged, blue and other defects. Also, the material must be dry, if it is wet, then the casing will deform subsequently.

The work begins with the preparation of the elements, the dimensions of each are once again accurately measured, after which, using a special device called a miter box, the casing is cut at an angle of 45 degrees. So you get perfectly matching joints, which will significantly improve the appearance of the frame;

Further, I recommend applying a protective coating to the casing, it is better to do this before installation, as you will be able to process the elements from all sides. In addition, you will not be afraid to stain the walls and the window, which is also important. Can be used with both paint and special formulations, which will not hide the structure of the wood, the main thing is that they are weather-resistant;

The prepared platband can be fixed at the place of its installation, this is best done with the help of finishing nails, they are almost invisible and may have different colors to match your coloring. Products are simply exposed and nailed to the end to drive a nail and not damage the tree, use a hammer.

Option 2 - the simplest home-made platbands

If you need inexpensive and authentic framing for country window or you love simplicity and natural lines, then this type of product will come in handy. Such products are made by hand and can be of the following types:

The simplest option is an unedged board with one uneven side, the material is cleaned of bark, polished, and unique elements of an unusual shape are obtained. It is possible in this way to make a platband from edged board, cutting out irregularities in random order on one side, as a result, you will get a very authentic and original design for the window;

The second option is even simpler: a board is taken and a frame is made with curly ends, they are simply cut as shown in the photo below, and you get a stylish frame. To enhance the effect, you can artificially age the material with sandpaper or burn it with a burner, so the products will look more impressive;

Another interesting solution– creating a stencil and cutting one side in a certain way. You can create any profile and transfer it to the material, and then cut it out with a jigsaw, everything is very simple, but you will get the original frame for the windows.

As for the workflow, it consists of the following steps:

First you need to find a board of a suitable size and configuration for you, the thickness of the elements can be small, there will be no load on them. Of course, it is best to have processed elements on hand, but simple board, it will have to be polished independently;
Manufacturing will not take much effort, you either need to decorate one side, or even cut curly ends. Then the surface is carefully processed with sandpaper, as a result, perfectly smooth elements should be obtained;
Concerning decorative coating, then it can be paints and varnishes, the surface can first be aged with a plastic or wire brush, which is placed on a drill, it removes soft layers, leaving a textured surface. It is better to apply the protective composition in two layers to ensure maximum reliability;

Fastening is done using finishing nails, their length and number depend on the thickness and weight of the elements. The main thing is to choose desired color so that the fixation points are not visible at all after the work is completed.

Option 3 - slotted platbands

This solution is very different from the two above, both in appearance and in the complexity of manufacturing. This option looks many times more interesting and original, this is a traditional solution in folk style, which is not suitable for any window.

As for such a casing, I cannot help but note the huge variety of options that you can implement, because you can use ready-made templates, or you can draw your own, your imagination is limited only by the complexity of the work. Too fanciful ornaments are much more difficult to realize, remember this.

Let's figure out how to make such skillful products with your own hands. Do not be afraid, for all the seeming pretentiousness, you will cope with the work without much difficulty. The main thing is to have everything you need at hand and be patient, the manufacturing process may not be complicated, but it takes a lot of time.

We need the following:

A board of the required length and width, it is better to take already processed options to simplify your work;
Electric jigsaw - this will be our main working tool, in addition to it, stock up on fine-toothed cutting blades so that the quality of the thread is as high as possible;

We need a drill with a drill in order to drill holes into which a jigsaw will be inserted and held curly cutting. There are no special requirements, the main thing is that the drill should be wider than the jigsaw blade;
To make patterns, we need either ready-made patterns, or homemade options, they must be of the required scale so that you can simply transfer them to the material without unnecessary troubles.

The workflow looks like this:

First of all, you need to prepare workplace, the board must be firmly positioned on comfortable height so that you do not have to work with a jigsaw with one hand and hold the workpiece with the other. You can use clamps or just press the element with something heavy, decide for yourself which is better, based on the working conditions;
Then you need to pick up a pattern, you can find ready-made options on the Internet, you can draw them on a computer, enlarge to the desired scale and print. They can be drawn on paper, or they can be cut out of cardboard - if you will be making a lot of elements, then this option is preferable;

An important point of the work is the transfer of the pattern to the tree, if you have a cut pattern, then there is nothing complicated, but if on paper, then you need to decide how it is more convenient to markup. You can put ordinary carbon paper under the sheet and just circle the drawing - it will work precise marking, and if you don’t have a carbon paper at hand, then you can pierce the paper so that after dots draw a pattern on the tree;
When the markup is over, you can get to work, all the elements that are located along the edge can be cut out like this, but the patterns inside require a different approach. In the place where it is more convenient for you to start cutting, holes are drilled, after which a jigsaw blade is inserted there and the pattern is cut out, the main thing is to be careful, monitor the accuracy of the lines and, if necessary, correct them;

When the element is completely cut out, it is the turn of bringing the casing to perfection. Is taken sandpaper, and all cutouts are sanded, the edges are rounded and the surface is leveled. As a result, you should get a finished element on which there are no protruding wood fibers;

Then I recommend applying a protective coating to the casing, it is better to do this before installing it, and not after. Coloring can be either monophonic or multi-colored in order to highlight individual parts of the pattern more clearly;
Fastening can be carried out both with the help of finishing nails and on dowels. This option is done like this: chopsticks are taken, a hole is drilled under them in the casing and in the window frame. After that, the dowel is well lubricated with PVA glue, inserted into the frame, and then placed on the window frame, as a result, the structure is securely fixed and there are no fasteners on the outside at all.

Option 4 - platbands with laid on thread

Another traditional solution that has been very popular for more than one century. This type of product has a number of differences from the previous one:

The product consists of two parts: a base in the form of a flat or figured board and carved elements that can be located both on the base and on the side of it. This design looks more expressive and voluminous, which is important for those who want to achieve the maximum decorative effect;

In the manufacture, many small elements can be used, which simplifies the manufacture. You do not need to cut out the entire casing, you can make a composition from several small parts, and in the end you will get just an excellent result;
Can be used different breeds wood, if pine or a more reliable option is taken for the base, then it is recommended to use apple or cherry for overhead elements. They are easy to process and with normal processing last a long time. Modern solution- the use of plywood for overlays, this option is good because you can save money, and at the same time cutting will be much easier;
Another solution is the arrangement of various carved elements in one product, resulting in luxurious openwork frames. The only negative is the complexity of the manufacturing process.

Window carvings of this type are made in much the same way as the above option, so I will only touch on the differences in the workflow:

First you need to choose the option that you will do, if the base is even, then just cut the board, if it is carved, do it as usual. The top decor can be cut from a board or plywood of small thickness, this will greatly simplify the workflow and speed it up;

If you decide to use plywood, be sure to choose a moisture resistant option. Ordinary sheets, even with a good coating, will begin to swell and warp after a couple of years.

All elements are carefully processed with sandpaper, after which they need to be painted. To achieve the greatest decorative effect, it is recommended to paint the base in a contrasting color to make the pattern even more expressive. Paint the parts before assembling, so as not to burn out later and not to paste over the surfaces, in such elaborate designs it is very difficult;

Installing platbands in a wooden house on the windows is done in any way convenient for you. You can use traditional dowels, you can use finishing nails, or you can go the easy way and use modern adhesive materials. At one time, I had to glue the casing in the summer cottage due to the lack of other fasteners, about 10 years have passed, everything is holding up just fine.

Option 5 - carved platbands

Without a doubt, this is the most difficult to implement, but also the most luxurious type of window frames. Currently, there are two main types of products:

Made by hand with cutters, these options are the most expensive, because they are made by hand from start to finish. You can make such a casing on your own only if you have some practice, you will have to master wood carving to cope with the work;

Platbands made on special milling machines look just great. After all, you can create any pattern or composition on the product, you just need to enter the pattern into computer program and she will bring the idea to life. Naturally, units have such equipment at home, but you can order a casing and get it in a matter of days.

As for the workflow, it makes no sense to talk about manufacturing, carving is a topic separate review or even an entire book. Therefore, we will deal with the installation, as this is an important part of the work and any mistakes will lead to damage to the expensive decor:

Most often, you get finished items without any coating. Often the wood structure is not closed, and high-strength protective compounds. The so-called yacht varnish is well suited, it is resistant to atmospheric influences and retains strength and reliability for a long time. Processing is best done in two layers in order to accurately cover all areas of the surface, Special attention give indentations and bends, the composition should get everywhere;
When the elements dry, you need to try them on and determine the position of each part. If the structure is assembled, then you can immediately drill holes and insert dowels into them, then grease the ends of the fasteners with chalk or something else and gently attach to the surface, there will be points on it where you need to drill holes. This markup option eliminates miscalculations and errors;
Lastly, the dowels and holes are smeared with carpentry glue, after which the platband is installed in its place and pressed well. This completes the work.

Conclusion

The video in this article will help you understand some important nuances themes are even better, because it is worth seeing once than reading a sheet of text. Choose optimal solution and realize it, of course, woodcarving is within the power of a few, but the rest of the options can be realized without having special skills. If you have any questions, write them in the comments below the review.

October 14, 2016

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

For a long time, wooden frames on the windows served as decoration for houses. Modern technologies allow you to create a unique home design, combining beauty, convenience and the best traditions of Russian architecture.

The choice of wood for platbands

Getting started on the creation of platbands, you need to decide on the choice of raw materials. The type of wood will depend on the method of carving the casing (laid on or slotted), the desired effect, the texture of the house and the material of the windows:

It is enough just to make platbands from deciduous trees: aspen, alder and linden (wood of medium softness, easily amenable to machine and manual processing, needs careful impregnation).

Trees such as pine and birch will delight with their properties (resistant to external influences, have high strength and do not need much care).

If your main requirement is durability, then you will not find better helpers than oak and ash (it is worth noting that sufficient hardness of the material requires the presence of professional equipment).

The apple tree is well suited for complex decorative details (it has high softness and plasticity).

Tool for making wooden architraves

In the manufacture of platbands from wood on their own you will need tools such as:

electric jigsaw;
a set of chisels;
a set of knives;
sandpaper;
hacksaw;
drill;
sanding paper;
miter box;
milling machine.

Manufacture of platbands

Many people ask the question "How to make wooden platbands?". To fulfill quality work for the manufacture of carved platbands, the following sequence must be observed:

Taking measurements, you need to find out the exact width and height of the window opening.
Choice of material, preparation of lumber. Wood must be dried (in order to prevent further deformation) and have a suitable thickness for carving (consignment note suggests 10 mm, and slotted 30 mm or more).
From the side, which will be the “wrong side” of the work, wood is selected for a few mm. This will ensure a good fit.
The sketch or template is transferred to the surface of the board.
After drawing the pattern, the pattern is cut with a jigsaw and various drills.
The resulting holes are carefully processed along the edges with sandpaper or sanding paper.
Small parts are attached to the base. This can be done in two ways: construction glue and nails.

Of course, admiring wooden lace, many people want to recreate such beauty on the facade of their houses. In order to determine the desired format, we have selected the most interesting photos of wooden architraves. The images shown are possible options your decorations window openings, different kinds threads and fasteners.

It is important! The elements of the pattern must be laid out along the fibers of the wood, otherwise, when drying out, the finished part may lose its appearance.

Installation of wooden platbands

Quality installation is half the job. You can fix carved wooden architraves in three ways:

Install on the spike with special glue. A blind spike is attached from the wrong side of the part; holes are drilled specially for it in the window frame. This method provides a neat appearance of the finished product and saves the junction of the frame and casing from unnecessary moisture.

Diverse in ornament and style, architraves on a wooden house will fill it with a special atmosphere. Carved platbands on the windows define the whole appearance of the house, give individuality. You can make them yourself or order them to your taste, color and suitable budget.

Photo of wooden architraves

Old Russian architecture is invariably associated with carved platbands on the windows. This form of design of houses is distinguished by species diversity. A few decades ago, each region was inhabited by craftsmen with their own style of creating decorative elements. Today's return to the roots is accompanied by a revival of interest in window decoration using carved platbands.

Framing purpose

The very word "platband" speaks of its location - "on the face", that is, one of its functions is to decorate the facade of the building. Therefore, people tried to express their individuality through it and decorate the windows with carved frames. In addition to the decorative role, window trims primarily perform a constructive function, closing the gap between the frame and the opening. This prevents dust from entering the house, protects against precipitation, drafts and extraneous sounds.

In the old days, carved platbands were also attributed magical properties. It was believed that framing a window with a certain shape of a bar protects from the evil eye and serves as a kind of amulet. Therefore, in whimsical patterns various figures and plants bearing a specific semantic load were viewed.

AT modern architecture The functional purpose of platbands for windows is as follows:

A well-chosen carved design allows you to visually stretch a low building or expand a narrow wall.
The opportunity to show individuality and decorate the building in accordance with the trend of a particular era.
Allows you to achieve a single architectural ensemble between all the buildings on the site.
Protection of cracks from the penetration of external negative factors (precipitation, noise, dust).
It is one of the elements of thermal protection of the house.

Remark ! Sometimes platbands are the only option for framing a window. This mainly concerns log cabins when the use of other materials is unacceptable due to the loss of a harmonious appearance.

Carved finishes, especially those made of wood, have a number of features that should be taken into account during the period of operation:

Dependence on the influence of atmospheric factors. Moisture and temperature changes invariably damage the decorative design.
When choosing a frame, you should take into account the properties of the rock from which the platbands are made, and take care of high-quality processing. Timely preventive measures extend the life of the product for the window.
Difficulties often arise when combining wooden carved elements with modern plastic frames. With this combination, it is preferable to install windows that imitate a wooden texture.

The value of carved elements

The desire to comply with ancient traditions requires knowledge of the meaning of various elements of carved architraves:

The sun, as a rule, is placed on the kokoshnik. It symbolizes life and energy.
The personification of wisdom and fertility lies in the image of a snake.
The symbol of harmony between spiritual and material aspirations is a cross in a carved platband.
The feeling of unity with nature is emphasized through vegetation.
Earrings testify to the hospitality of the owners of the house.
The connecting element of all times is the silhouette of a bird on the window.

Characteristics of materials and forms

For the production of platbands on windows, natural and artificial materials. Traditionally carved elements were made of weather-resistant wood. Characteristics of the properties of individual breeds will help determine the most suitable type:

Larch is minimally susceptible to rotting processes, but is not suitable for production. carved frame due to its fragility.
Aspen, alder and linden are the most convenient species for creating openwork decor on windows. However, the malleable and soft wood of the carved architraves needs special treatment due to its ability to absorb moisture well.
Oak, ash or beech window frames are resistant to negative weather conditions, but the processing of carved elements is burdened with difficulties, overcoming which you will get a durable decor.
A good choice would be birch or pine wood, which allows you to perform a neat carved decor. At the same time, the platbands have sufficient strength for external use.
Small carved window decorations, which are fixed on the main elements, can be made from cherry or apple.

Advice ! Regular renewal of wooden architraves waterproof paint or varnish will provide them with a long service life.

What other materials are used in the production of window linings and what are their features, we will consider below:

Laminated MDF allows you to accurately simulate the color of any type of wood, but is intended exclusively for indoor use.
Plastic windows are harmoniously combined with platbands made of a similar material (PVC), which is not subject to decay, has a wide color palette that is resistant to solar radiation. The color of the platbands is selected taking into account the finishing of the house to match or contrast with the facade.
For round windows, polyurethane products are ideal, characterized by lightness and unpretentious care.
Metal strips are attached for protection assembly seam, connecting them into a single whole with a profile box.

There are two main ways to install platbands:

Invoice - the most common method in the design of windows. For fixing, special glue or nails are used.
The telescopic method involves L-shape manufacturing a casing, which allows you to fix the product by entering the grooves of the box. Most often used for finishing doorways. Its characteristic difference is the absence of traces of fasteners.

Patterns and types of thread

The carved forms of the architraves give the window individuality, but in order to make them, you will definitely need templates. The presence of woodcarving skills allows you to choose a complex ornament. If the ability to work with wood is not enough, it is better to find a light pattern for window trim. We suggest exploring:

options for templates of single elements and their general appearance;
top, bottom and side decoration details.

You can copy them completely or add your own details to the pattern. The picture of the carved platband you like or its fragment must be scaled up taking into account the size of your window. For the manufacture of carved patterns fiberboard, thick cardboard or paper is used. It is desirable to decorate windows with platbands with the same thread. Please note that it is much more difficult to make small carved elements, and they become unusable faster than others. In this case, a partial replacement of the frame will be required.

Warning ! Be sure to consider the slope at the top of the carved casing. This will prevent the accumulation of snow and ensure timely drainage of water.

The upper part of the window casing is called a kokoshnik, the lower part is called a towel. The contours of plants, images of animals and geometric figures were most widely used in the ornamentation of carved architraves.

The key details of the drawing for any window trim are:

lower bar or window sill;
vertical rail;
top bar.

The scheme can also contain all kinds of hangers, flowerpots or a diadem. Detailed description the names of carved decor elements are shown in the diagram below:

If your windows are of different sizes, experts advise making a drawing with an intermediate repeat repeating required amount once. For rapport, you can choose one or two elements that repeat alternately. An example of such a scheme is shown in the photo below:

There are several ways to make a wooden carved frame on the windows:

Slotted platbands are characterized by the greatest decorativeness and delicacy. The product is made of wood light colors or subjected to subsequent coating with white paint. This window design for more dark wall looks sophisticated and elegant, vaguely reminiscent of Vologda lace.
With overhead threading, separately cut parts are fixed to a solid board by gluing or nailing. This technique allows you to arrange a window with simple platband. Protruding elements are often covered with contrasting paint.

Sometimes both types of thread are combined.

Manufacturing process

Having decided on the pattern, material, type of thread and method of fastening the platbands, you can directly proceed to the manufacture of carved framing for windows.

Important ! The drawing on the workpiece needs proper placement. To prevent cracking of the thread will allow the location of the elements along the fibers of wooden blanks.

Places of the pattern where it is necessary to make cuts, it is better to mark with color. The work on the manufacture of platbands consists of the following stages:

Taking measurements from the window.
For slotted carving, boards with a minimum thickness of 30 mm are selected, the overhead method allows the use of wood with a thickness of 10 mm. All work is done with dry lumber.
Blanks are cut out.
For a snug fit of the carved casing from the inside, the wood is selected to an insignificant depth (1-2 mm).
The pattern applied using the template is cut out. To form holes, drills of various diameters are used, a jigsaw is needed to make slots. To make a beautiful cut, the entry point of the jigsaw is marked with a drilled hole.
All carved elements of the platband for the window are cleaned with sanding paper. Wood dust is removed from blind holes with a vacuum cleaner.

Laid on thread provides for fastening finished elements to a wide casing on nails with removed caps. Strengthen the strength of the connection will allow glue applied from the wrong side of the casing. The use of self-tapping screws is not recommended due to the risk of damage to the carved section of the connection.

Carved platbands are installed on wooden windows using deaf or through spikes. The first option is distinguished by a reliable connection and a complex installation process. The second method is simpler, but less reliable. The installation of carved elements on a plastic window is carried out using liquid nails.

preliminary protective treatment carved architraves and regular preventive care will ensure long-term preservation of the attractive appearance of the window.