Do-it-yourself waterfall fountain at home. Making a decorative fountain for the house with your own hands. Fountain with polyethylene film

In specialized stores today you can buy very original. The range of such goods is quite large, as they say, for every taste and color. Many people like it when the murmur of a small trickle of water is heard in the house. These sounds allow you to relax and calm down after a hard day's work. However, most consumers do not know what can be done. At the same time, special costs are not required, as well as knowledge.

Construction material

So, below we will describe how to make a fountain at home. To create an original design you will need:

Glue.
A container that will serve as the basis for the fountain.
Approximate scheme of the fountain
Large sink.
A small piece of hose commonly used for cleaning aquariums.
Polyethylene film.
Expanded clay, decorative multi-colored soil and shells of various shapes and sizes.

A large sink will serve as the central detail of the entire composition. A pump and a hose are needed for pumping water, and multi-colored soil, shells and expanded clay are for decoration. In addition, you need a small piece of plastic wrap. So, expanded clay can be purchased at any flower shop. As for the soil black, red, and it is better to use a special mixture for aquariums.

We select the capacity

A home fountain should be strong enough and at the same time beautiful. Therefore, the container for its base should be selected more carefully. The first step in the manufacture of a structure is the selection of a vessel. For the fountain, in this case, you can take a flower pot. If there is no such container, then you can use a flower pot, a beautiful basin, a clay vase, and so on.

The most important thing is that the vessel does not leak. If, for example, there are holes in the flower pot, they should be sealed with epoxy glue.

Choosing a pump

Since everyone can make a fountain at home, you should pay special attention to the pump. After all, not everyone understands them. There are several with a spray tip and a regular one. In this case, the first option is not suitable. First of all, splashes can get outside the main tank. And one more thing - we have a completely different idea.

Therefore, to make a mini-fountain with your own hands, an ordinary pump will be enough. The tip can be made by yourself. In this case, the pump should simply raise the jet up.

First stage

So, how to make a fountain at home at no extra cost? First you need to cut off a small piece of hose, about 10 centimeters long. After that, you need to put it on the pump tip and see if the hole in it is completely open. It is on this that the power of the jet that will be supplied to the fountain depends. The finished structure should be installed at the bottom of a pre-prepared container.

The home fountain in this case will be with a large sink in the center. This is where the water will come out. Therefore, it is necessary to make a hole in the sink that will fit the hose in size. This can be done with a conventional drill. Of course, the sink should be drilled carefully so that its walls do not crack.

Stage two

The layout of the fountain is quite simple. With its help, everyone will be able to assemble a similar decoration for their interior. When the pump is installed in the tank, expanded clay can be poured, which must be covered with polyethylene from above. A hole for the hose should be made in advance in the film.

Polyethylene is necessary so that expanded clay does not float when wet. After all, water will be poured into the container. After that, multi-colored aquarium soil should be poured onto the film.

Washbasin stand

The composition will not look if the main element is simply set on pebbles. Therefore, you should make a neat stand. So, how to make a fountain at home, which will not only soothe with the pleasant sounds of flowing water, but also be a wonderful addition and highlight of the interior? A beautiful stand can be created from pebbles. They can be held together with epoxy glue. When making the stand, do not forget about the hole for the hose.

Assembling the structure

When the stand is ready, a hose should be passed through it. If it is too long, then it needs to be shortened. Otherwise, you will see where the water is coming from. Now you can install the main element - a large sink. In the previously made hole, stretch the hose just one centimeter.

That's all, it remains to decorate the fountain. To do this, pour some shells around the sink and put the most beautiful pebbles. All this can be purchased at the store - for lovers of aquarium fish or as a gift.

If there is no large sink, then it can also be replaced with any suitable item. The main thing is that you can make a hole for the hose in it. The design of a decorative fountain for a room depends entirely on the imagination of its creator.

The final stage

After the composition is completely folded and all its elements are fixed, it is necessary to pour water into the container. There is no point in completely submerging the soil. So the fountain will lose the main idea and its charm. The most important thing is that the pump is completely hidden under water.

Now you can turn on the fountain. To do this, plug the cable from the pump into the outlet.

That's all, the homemade fountain for the room is ready. However, it is worth remembering that the water from it will gradually evaporate, especially in the hot season. Therefore, it will be necessary to add liquid to the decorative fountain at least once a week. More often if necessary.

You can mask the cable from the pump to the outlet. In addition, the indoor fountain can be decorated with artificial flowers. This will give the composition a more effective look.

Finally

Now you know how to make a home fountain. It does not require large expenses and special talents to create it. Enough to turn on the fantasy. It doesn’t take much time to make such compositions, but they will delight you for more than one year.

We all rejoice at the arrival of summer, but when the sun begins to bake strongly, we want coolness. Therefore, many tend to spend more time near the fountains, which will not only freshen the air, but also cheer you up with the sound of falling water. But it is not necessary to go to the square to admire this action. Each person, regardless of whether he lives in an ordinary city apartment or in a private house, can make his own decorative fountain.

Pros and cons of creating

A decorative fountain is primarily an element designed to decorate the surrounding space. It has several key advantages:

But artificial fountains have certain disadvantages:

The need for special care and periodic monitoring. This structure must be cleaned regularly to prevent debris from clogging the pump. It is also necessary to monitor the health of the equipment and promptly eliminate the problems that arise.
Considering that the pump requires mains electricity, running the fountain will incur certain costs, which can be especially high if the installation is to be operated for a long time.

Types of structures

Decorative fountains can differ from each other in various ways. For example, according to the type of accommodation, it is customary to classify them into home and street. The former are designed to decorate rooms, while the latter are used in open spaces, where they act as an integral element of landscape design.

According to the type of construction, fountains can be divided into several types:

Depending on the nature of the movement of the water flow, fountains can be divided into the following types:

It is also customary to highlight annular a fountain in which an annular-shaped pipe is provided, and holes are located in it at the same distance from each other. At the moment water is supplied through them, a stream appears that resembles a ring.

An interesting variation is the installation in the form of a hemisphere or hemisphere. In its composition, it has several parallel disk nozzles connected in a special way. At the moment of supplying water under pressure, the jet acquires a spherical shape, which gives the entire structure a very unusual and spectacular appearance.

Shapes and sizes

Although the fountain can be of any size and shape, when choosing them, it is recommended to be guided by common sense and do not forget that it will be somewhat more difficult to care for the installation of a more intricate shape and large dimensions.

The bowl of the fountain can have a symmetrical or non-standard asymmetrical shape. For example, it can be made in the form of an oval, square, circle, triangle, as well as any other geometric shapes, including those that follow the contours of the silhouette of an animal or a person.

Also, fountains can be complex multi-level or made of several interconnected containers. In this case, each of these elements can be equipped with its own nozzle, being an integral part of a more complex installation.

Stylistic design

Fountains used for decorative purposes can be made in a wide variety of styles. The belonging of the structure to one direction or another depends on various factors - appearance, shape and size, material of manufacture.

There are several design options applicable to decorative fountains:

Installation location

In order for a decorative fountain to successfully cope with its role, it is necessary to correctly approach its location.

Prepare the site in advance so that you can approach the fountain or stay close to it. Make sure that the structure is not covered by other elements of landscape design.

DIY decorative fountain

It is not necessary to pay money to the master for the manufacture of the original decorative fountain. Any owner can cope with this task on their own.

Materials and tools

And first of all, you need to prepare the tools, materials and fixtures necessary for work:

container that you will use as a bowl. It can be an old barrel or a bathtub. The main thing is that the product is strong enough without damage to withstand the volume of water;
a pipe or a sufficiently strong and dense hose for water supply;
pumping unit;
materials for waterproofing;
filter;
nozzle;
shovel.

Manufacturing process

After you have prepared everything you need, you can proceed to the manufacture of a decorative fountain:

The fountain you made will last longer if you regularly check the condition of the devices and promptly eliminate the malfunctions that arise, as well as clean the bowl of debris that gets into it.

A decorative fountain can become one of the main elements of your site and change its design for the better. You just need to get it right to make it. With a little imagination and using unnecessary materials, you can surely create a creation with your own hands that will look no worse than products made by professional craftsmen.

Being engaged in the improvement of household territories, some owners at some point come to the understanding that there is not enough fountain on the site. You should not give up this idea if you have everything planned out for a long time and there is no extra space left. After all, it does not have to be a large structure. Even in small areas, you can find a place to arrange a compact decorative fountain there, which will give you coolness and become a great relaxation area.

If you decide to create it yourself, then you need to thoroughly prepare for this work. And first of all, you must understand what kind of installation this installation should have, what material it should be made of and how water should flow in it. These and many other factors will determine whether you are satisfied with the end result.

If for the first time you have to make your own fountain in the country, then you should not build an installation of a complex configuration. This will not only require more time, money and effort from you to create it, but will also create certain difficulties for you in the future during your care. It is best to build a small standard-shaped fountain, which can be made from the most common materials and will be no more difficult to care for than any other object on your site.

Even if the pond on your site is small, it can make a good contribution to the improvement of your territory. And if you decide to build a fountain with your own hands, it will be interesting. It will not just be a place of leisure, but you will also receive a mountain of praise from friends, acquaintances and neighbors.

However, not everyone wants to take on such an idea, because they think that the construction of such a hydraulic device is very expensive and time-consuming, and also requires the intervention of a specialist. If you want to know how to make a fountain at home, then we want to please you that anyone can afford to build a fountain with their own hands at home, you just need to know all the points of design and construction. In this article we will look at how to make a fountain.

Fountain types

Due to the type of construction, products are divided into two types:

Open fountain. As a rule, in such buildings, water is supplied to the nozzle. The jet is formed due to the fact that there are differences in water levels. Here you need to monitor the water level, and the water quickly becomes dirty. In order to create such a pressure, you need to raise the container by a meter from the nozzle.
Pump fountain. This is the most common design option. Here the pump is placed on the bottom, which creates a constant cycle of water. For structures of this type, the pressure is quite strong and visually looks more beautiful.

tiered fountain

According to the type of pumps, fountains are divided into submersible and stationary.

Submersible pump. It is placed at the bottom of the pond. With the help of a pipeline, water rises to the surface, and the nozzle creates a certain form of flow. In this embodiment, water seems to erupt from the earth.
A stationary fountain is usually built from stones in the form of a figure, the shape of which can be any to your taste. Such structures are installed in a park or square, as they are a kind of art.

Ideas for a fountain (video)

Where to install the fountain

When choosing the optimal place for construction, it is important to take into account such a factor as the slope of the earth. If the surface on the site is uneven, then it is better to install the structure at the bottom. Thanks to this, it will be easier to adjust the volume of groundwater, and the oxygen saturation of the air will also increase.

Install the fountain where it will be convenient to admire it

It is not advised to build a fountain:

Near the house, as with a strong wind, water will fall on the house itself.
In an area with direct sunlight, which will contribute to the rapid flowering of water.
Under a tree, as fallen leaves or overgrown roots can ruin the product.

It is necessary to place the fountain so that it does not interfere with moving around the yard, but on the other hand, so that it can be clearly seen from different sides. We advise you to locate it near the place of leisure.

The smallest distance that should be between the structure itself and green spaces is 0.5 m. Thus, the plants will be protected from a large amount of moisture. The same principle is relevant for furniture near a water feature. The most optimal location of the structure is a place in the shade and without wind, near water and an electrical network. So I will save your efforts and material costs.

After we have decided where the fountain will be, you can proceed to its design or what will be the shape and depth of the building

Construction materials

To save money and power costs, it is possible to build a pond with a pump placed in it.

Materials for building a fountain:

Capacity
Pump
water insulator
Shovel
Stone of various sizes
Decor elements

How to choose and install a container

In the case of a small fountain, an ordinary small basin can serve as a reservoir.

For a larger option, you can use a bath or a pit dug with your own hands. When using a bath, you need to dig a hole so that its edges are below ground level. First, all holes are closed in the container, then it descends into the pit, where it needs to be strengthened with stones and earth.

If you want to dig your tank, use a film for this. It, in turn, should be dense and of high quality. In a dug hole, the film is pressed against stones. Also, stones are lined to the bottom. They should not be sharp, as this may damage the film. They need to be evenly distributed throughout the bottom.

How to choose a pump

To build a fountain, it is not necessary to buy expensive materials, since you can use the elements used in the household. But you don’t need to save money on buying a pump, since the quality of the pump determines how long it will work without problems, and the more beautiful the end result will be.

The best choice for construction is to use a submersible pump. But if you have a large or cascading fountain, installation of a surface pump is welcome.

The main indicator when buying a pump is its power. If your fountain has a small water pressure, then you do not need to buy a powerful pump. It is important to know that the power corresponds to the diameter of the pipe, and the pressure must be strong, otherwise it will be the result of an unsuccessful fountain.

The erection of the fountain

The construction of the fountain consists of five stages:

Digging a pit
Trench reinforcement
Fixing the tank or installing the film
Pump installation
Fountain decor

Now consider some options for building a fountain with your own hands.

Examples of building fountains

With the use of a tire

For this we will need

Old used tire, for example, from under a tractor
Cement, water, gravel and sand
concrete mixing tool
Film
Level
Stones of various sizes
Mastic or silicone
Pump

Fountain made of tires lined with stone

Sequencing:

Preparing a concrete solution.
Pour the solution onto the bottom 10 cm high and level using a level.
After the solution dries, put the tire on the bottom, after cutting off the sidewall on one side.
Using mastic or silicone, glue the tire to the base.
Concrete is poured along the edge of the tire, thereby strengthening the structure.
We put the pump in the center of the tire.
We decorate the fountain. With the use of a tire

Using film

For this type of fountain you will need:

Thick film
Shovel
Sand
Pump
Stones of different sizes

Fountain in a film pond

Sequencing:

First, you need to dig a pit, remove everything superfluous from the pit, for example, stones and ram the bottom.
Next, you need to fill the pit with sand.
The next thing to do is to lay the film. We lay it so that the edge goes beyond the hole. Then we press the film with stones along the contour of the pond.
Then we install the pump, depending on its type and instructions.
We decorate an almost built work of art according to your taste.
Fill the pond with water.

Using an old bath

For this case, you need to have in stock:

Shovel
stones
Pump
Bath
Insulating tape
Metal shears
Metal sheet
Drill

Fountain from an old bath

Sequencing:

We tear out a hole according to the size of the bath.
We lower the bath into the pit and clog all the holes
From a sheet of metal, you need to cut wide strips and lay them around the perimeter of the bath, pressing down with stones.
Decorative gravel can be placed in the bath itself.
Installing the pumping system.
It is possible to set the backlight, and change the color of the water with the help of blue. Thanks to this, the bath will not be noticeable.
We decorate our design.

Using a plastic bottle

For such, if I may say so, a fountain, you need to have available:

Plastic bottle
Carnation
Insulating tape
garden hose

Practicality in everything!

Sequencing:

Remove all stickers from the bottle.
We punch holes in the bottle with a hot nail.
We install the hose in the bottle and tightly wrap it with tape.
We place our structure in the planned place and turn on the pressure.

This mini fountain is suitable for watering the garden and garden.

home decorative fountain

For this we need:

Flower pot
Glass paint
water pump
contours
aquarium decoration

Flower Pot Fountain

Sequencing:

We paint the pot with paints.
Make a small hole in the bottom of the pot.
We mount the pump under the pot stand.
We pass the tube through the hole made.
We put pebbles on the bottom.
We make decoration.
We fill the container with water.

Decor

If you decorate your fountain, it will further emphasize how unique it is. Next to the pond, you can put natural stones, you can even have different colors, put up indoor plants, put various figures of toys or animals, etc.

Design lighting can amaze your guests with its originality. This is done using special equipment. Lamps are placed along the perimeter of the structure, and lighting is installed at the bottom.

Plants and decor for the fountain

Aquatic plants can be placed at the bottom of the reservoir, and shrubs can be planted around it.

Fountain Care

After you make a fountain at home, it will, of course, need to be well looked after. In order to maintain order, and the water was clear, and the building had a pleasant appearance, it is important to constantly clean the tank. Using special tools, you can remove leaves and similar things from the pond that can spoil the water, as well as damage the equipment.

When the summer season is over, you will need to drain the water from the reservoir, remove the equipment into the room, and cover the rest with oilcloth to protect it from dirt.

Making a fountain with your own hands in a summer cottage or in your apartment is not so difficult and does not require large material expenses. Before erecting a structure, you need to find out what its shape, size and location will be. You can place it anywhere - in your garden or near the gazebo. Subsequently, the fountain needs to be well looked after - control the cleanliness and water level, as well as remove fallen leaves.

Such structures are often installed in suburban areas. The fountain can decorate any free area or become its oasis. If you connect your imagination and use various decorative elements, the fountain will look even better and more original.

How to mount a fountain in your garden (video)

Even the smallest pond is able to decorate your own summer cottage and give it a twist. And a do-it-yourself fountain will not only become a favorite place to relax and provide aesthetic pleasure, but will also become an occasion for compliments from invited guests.

But not everyone decides to build this mysterious hydraulic device with their own hands. Some summer residents mistakenly believe that the construction of a fountain is a laborious and expensive process, and one cannot do without the help of specialists in this matter. But every fan of spending time in nature can give himself such pleasure, the main thing is to know all the nuances of building a fountain with his own hands.

SELECTING THE TYPE OF THE FOUNTAIN

There are two types of fountains according to the type of construction.

The open version involves the supply of water to the nozzle. The formation of a jet in this version of the device occurs due to changes in the water level. The water pressure in this case is weak, so it is necessary to constantly monitor the water level. In addition, the water in such a fountain quickly becomes contaminated. To create it, you need to install a small tank at a height of about one meter above the nozzle.
A fountain with pump installation is the most practical and effective option. Thanks to the placement on the bottom of the pump, continuous circulation of water is ensured. Here, the pressure is stronger and the visual effect is more beautiful.

By design, pumps that act as fountains are divided into submersible and surface (stationary).

THE OPTIMUM PLACE FOR THE FOUNTAIN

When choosing a convenient place for the construction of a fountain, it is recommended to take into account the degree of slope of the earth. If the plot is uneven, it is better to place such a decoration in a lowland. This option for the location of the reservoir will not only adjust the volume of groundwater, but will increase the oxygen saturation of the air.

too close to the house so that moisture in windy weather does not get on the walls;
in open areas, in order to prevent water from blooming due to sunlight hitting the pond;
next to the trees, so that the leaves, seeds, fluff falling from them do not clog it, and the roots do not damage the waterproofing.

The fountain should be located in such a way that it is not an obstacle on the way to other buildings and is visible from all points. It is recommended to place the structure near the resting place.

The minimum distance that must be maintained between the fountain and plants, buildings, furniture is 50 cm. So the plants will not die from excessive moisture, and the furniture will not become unusable. The ideal option for the location of the fountain is partial shade and a place protected from the wind, located in close proximity to a source of water and electricity. This arrangement will save you from unnecessary wires and additional work on their insulation.

Having decided on the place, it's time to think about the shape and depth of the future fountain.

PREPARATION OF MATERIALS FOR CONSTRUCTION

For the construction of a fountain in order to save money and effort, you can use the technology of building an ornamental pond with equipment for its pump.

Materials needed to build a fountain:

fountain container;
pumping station;
durable film;
bayonet shovel;
natural stones of various sizes;
sand, gravel;
decorative elements.

TANK SELECTION AND INSTALLATION

If you plan to build a miniature fountain, you can use an ordinary plastic basin or any other small container as a reservoir.

For large reservoirs, old bathtubs or a self-dug pit are suitable. If a bath is used, it is necessary to dig a hole of such a size that its edges are not higher than the ground. All holes are securely sealed in the bath, after which it is lowered into the pit and strengthened with earth, stones and sand.

For a home-made tank, they make a hole of the required depth and cover it with a dense, high-quality film, which is fixed along the edges on the surface with stones. Stones of various shapes and sizes are also poured to the bottom. It is important that the stones do not have sharp edges and cannot cut through the film. The stones are evenly distributed over the entire bottom of the future fountain.

SELECTION OF A PUMP FOR CONSTRUCTION OF A FOUNTAIN

In order to construct a fountain on the site on your own, it is not necessary to purchase expensive materials, you can adapt any old elements. However, you should not spare money - the pump, the better it is, the more beautiful the fountain will turn out and will decorate the site for longer without causing problems.

A submersible pump is the best option for building a fountain in a summer cottage. Works on the principle of a centrifuge. You can also install a surface pump, it is mounted on the edge of the reservoir, but is most often used on large fountains and cascading reservoirs.

When choosing a pump, it is worth starting from the pressure that is constantly present in the pipe and the differences in this pressure. Therefore, buying the most powerful pump may not be justified, since not in all cases it will be able to work out its full power.

Regardless of which type of pump is chosen, it is important to remember that its power must be related to the diameter of the pipe. The jet of the fountain should come out under powerful pressure, and not slowly flow out of the pipe, since there will be no effect from such a design.

HOW TO MAKE A FOUNTAIN WITH YOUR HANDS: A STEP-BY-STEP INSTRUCTION

The construction of the fountain includes several main stages:

pit preparation;
fixing the trench;
installation of a container or covering the bottom and edges with a film;
installation of pumping equipment;
fountain decoration.

FOUNTAIN WITH A POND FROM AN OLD TIRE

To build such a fountain you will need:

an old tire from a truck or tractor;
cement mixture, water, crushed stone and sand;
container for mixing cement and a shovel;
sealant;
building level;
mastic;
stones;
pump.

Stages of work:

VIDEO - FOUNTAIN FROM THE TIRE WITH YOUR HANDS

FOUNTAIN FOR COTTAGE USING FILM

For such a fountain you will need to prepare:

thick film;
shovel;
sand;
pump;
stones of different sizes without sharp corners.

Stages of work:

we dig a hole, clear it of stones and tamp the bottom;

NEW LIFE FOR AN OLD BATH

For this version of the country fountain, you need to prepare:

shovel;
pebbles;
pump equipment;
bath;
insulating tape;
metal scissors;
colored iron sheet;
drill.

Stages of the construction of the fountain:

we dig a pit corresponding to the size of the existing container;
we put the bath inside and plug all the holes;

we cut out wide strips from iron and lay them around the bath, close them with stones;

MINI FOUNTAIN FROM A PLASTIC BOTTLE

For this sprinkler you will need:

plastic bottle;
metal, strong wire or nail;
insulating tape;
garden hose.

Materials for a decorative fountain

Construction stages:

decorate the pot with paints;
make a small hole in the bottom of the pot;
install a pump under the pallet;
we drag the pump tube through the hole made in the pot;
we fill the bottom with pebbles;
decorate with artificial plants and figurines;
fill the pot with water.

VIDEO - DECORATIVE FOUNTAIN OWN HANDS

FOUNTAIN DECORATION

You can emphasize the uniqueness of a handmade fountain by decorating it. It is recommended to lay out beautiful, multi-colored stones of different sizes around the reservoir, put flowers in pots, place cute figurines of animals, birds, and so on.

In order for the fountain to amaze with its beauty and unusualness at night, you can make it illuminated with the help of special equipment. Lamps installed around the perimeter of the fountain and lighting at its bottom will create a fabulous, magical atmosphere.

The bottom of the reservoir can be planted with special plants, bushes can be planted around the fountain.

Any country pond and fountain, including, needs careful care. To maintain the order and transparency of the water, a pleasant spring appearance of the structure, it is necessary to regularly clean the tank. With the help of special devices, it is required to remove leaves, seeds, fluff and other objects from the surface of the water that can not only spoil the appearance of the reservoir, but also lead to a malfunction of the fountain.

At the end of the summer season, it is necessary to drain all the water, transfer the removable parts of the structure to a closed room, and cover the remaining parts and the bowl with a film so that dirt does not get into them.

It will not be difficult to build a fountain with your own hands in a country house or even in an apartment and will not require large financial resources. Before building a decorative fountain, you need to decide on the shape, size and installation location. There are many options for the location of such structures - at the gazebo, on the lawn, in the garden. After the construction of the fountain, you need to carefully monitor the purity of the water, regularly remove debris and add water, as it will evaporate.

Such designs are widely used in the design of suburban areas. Fountains can decorate any ownerless area or become the highlight of a summer cottage. And by connecting fantasy and decorative elements, you can make it even more beautiful and unusual.

contemplative

landscape design

The intense rhythm of our life involves periodic rest, both physical and moral, and there is nothing more pleasant than sitting in silence, enjoying the beautiful view and pleasant sounds.

For this purpose, decorative fountains for an apartment can be suitable, which fully meet all these requirements.

After all, there is nothing more pleasant than listening to the sound of murmuring water and looking at a pouring fountain. And to build it in an apartment, even if small in size, is a completely solvable task.

In addition to the listed useful properties of this structure, the fountain in the apartment is a good air humidifier.

In contact with

Classmates

Types of mini-fountains at the place of application

Small home fountains can be divided into several types. According to the place of application, they are divided into country and indoor fountains. It is clear that a country fountain, in most cases, is installed on the street, and a room fountain in a city apartment. The country fountain is made large and it is important to choose the right place for its installation.

Do-it-yourself decorative fountain in the apartment video:

Place to install a country fountain

When choosing a place, it is important to observe three important conditions:

It is highly undesirable to install near trees. Firstly, growing roots can damage the fountain bowl and its waterproofing. Secondly, falling fruits and leaves can also disrupt the water system and the bowl.
If the fountain is installed in open areas, then flowering of water may occur due to direct exposure to the rays of the sun.
If the fountain is installed in the immediate vicinity of the house, then additional dampness may form on the building during windy weather, due to the drift of water drops from the fountain towards the house.

Classification of fountains according to the type of falling water

According to the type of falling water, a decorative fountain can be divided into several types.

Waterfall. This view has a ledge design with falling water. It has a beautiful appearance and is used most often.
Cascade. The installation scheme is the same as that of the first type, only it consists of several water flows. The liquid in them overflows along thresholds or inclined ledges.
An ordinary fountain, made in the form of a jet beating up and spraying spray around it.
Fountains made in the form of streams and lakes. They have an original appearance and are becoming increasingly popular.

Do-it-yourself indoor fountain

Looking at the decorations of some fountains, it seems that their manufacture and installation are very difficult to perform. Yes, there are rather bulky designs, and their installation will require you to have serious professional skills and knowledge, but a small do-it-yourself mini-fountain is quite capable of being made by almost every person who has simple skills in construction and installation work. In addition, you will create a design based only on your preferences and taste, the most suitable for your home interior. In addition, you will save a lot of money.

Materials and tools

So, if you still do not know how to make a mini fountain in your apartment, then read our step-by-step instructions. Before starting this work, you need to purchase the necessary materials and tools.

Fountain container. It can be a basin, a flower pot or something else at your discretion.
The hose used to clean the aquarium is about 10 cm long.
Polyethylene with dimensions slightly larger than the container.
Glue waterproof, expanded clay.
Aquarium pump.
Medium or large sink, and stones or pebbles to strengthen it.
Small shells and colored ground used for decoration.

The bowl for the fountain, which we choose, needs to be checked for cracks and holes in order to prevent future leaks.

Fountain materials

Pump installation

If you are making a tabletop fountain, then you first need to find a hose to work through which a stream of water will come out. To do this, cut off 10 cm from a regular aquarium hose and insert it into the pump. Immediately check whether your system is in working condition so that you do not return to this issue later. We install the pump to the bottom of the tank and fill it with expanded clay. Do not forget to level the surface after backfilling.

Final work

After you have filled up the expanded clay, you need to cover it with a film, having previously made a hole for the hose. Then we put decorative soil on the film.

Note!

For a sea shell, it is advisable to make a base of stones and fix them to the shell using waterproof glue.

The next step is to push the tube through the stones and the sink, after making a hole in it. The end of the hose should protrude from the sink by about 1 cm. The surface of the fountain should be decorated with stones and shells at your discretion. Thus, you saw that you can make a table fountain with your own hands without spending significant effort and money.

Advantages of a fountain without a pump

If you think that when building fountain structures, it is imperative to use a mini fountain pump, then you are mistaken. You can make a small fountain without using a pump, while it will work solely thanks to the laws of physics.

Yes, in these designs there are some restrictions on the power of the jet, but then you do not have to spend money on electricity and buy and connect a pump. You need to know that such a fountain should not be large, otherwise you cannot do without a pump.

decorative fountain

How the fountain works

Such a fountain will work on the principle of communicating vessels, with only some peculiarities. They need to be placed on the same level, connected to each other by two tubes. It is better to take plastic containers and preferably of the same volume, and tubes with a minimum thickness for longer uninterrupted operation of the fountain. The tubes are inserted into the bottom of each vessel, into pre-drilled holes, which then need to be sealed.

Illuminated fountain

Final assembly and installation of the fountain

In order for such floor fountains to work without a pump, you need to use a third vessel, equal in volume or greater than the previous two. To this vessel, in the walls, closer to the bottom, make two more holes, where you insert the two ends of the tubes from smaller containers.

We also tightly seal the inlets of these tubes, and insert a T-shaped adapter into the bottom of a large vessel. After that, the design of your fountain is considered complete. You will have to arrange it according to your taste, preferences and combination with the interior of the apartment.

Garden fountain

Where can I install apartment fountains. As you probably already understood from the above, fountains for an apartment come in a variety of types. In addition, they can be installed not only on the floor, but also on the table and even on the wall.

Note!

Desktop structures are usually the smallest in size and can even be placed on bedside tables and a window sill.

Floor fountains depend on the size of your apartment and can be very impressive. Wall fountains look like real works of art and look like pano or paintings.

Their installation and manufacture, of course, is more complex and requires much more skills and material, but with a successful performance of your own, you will get indescribable pleasure contemplating them.

Watch a video on how to make a decorative fountain in an apartment with your own hands:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos for publication on a topic?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!