How to install stretch ceilings: step by step instructions, features and recommendations. Stretch ceilings: step-by-step instructions for installation and dismantling with your own hands Installation of stretch ceilings step-by-step instructions

In an apartment or a private house will become good decision ceiling decoration with stretch fabrics. This will help hide the unevenness of the base, hide various unseemly communications under the material (electric wires, exhaust hood, etc.). Stretch ceilings have a lot of advantages. There are a huge number of their colors and textures. This finish will harmoniously fit into almost any type of interior.

Installation organizations carry out the installation of canvases quite expensive. Wanting to save money family budget, if you have enough free time, you can perform all the actions yourself. How to install stretch ceilings will be discussed in detail in the article.

Material selection

There are two main varieties stretch ceilings. How to install presented designs, directly depends on their features and characteristics. There are fabric ceilings and PVC film trim. The choice depends on the type of room, as well as on the preferences of the owners of the house.

fabric ceilings made from polyester material. It is impregnated with polyurethane to give the necessary durability and wear resistance. Almost any pattern can be applied to the surface of the canvas. It can be one color, a drawing or even a picture. Fabric ceilings due to features performance characteristics install in the living room, bedroom, children's room or office.

PVC film has a glossy surface. It gives the room solemnity and beauty. Such a canvas does not allow moisture to pass through, it is not afraid of splashing. The film can be installed in the bathroom, in the kitchen and in other rooms. Cheap varieties of material can emit an unpleasant chemical odor. This is detrimental to health. It is not recommended to install such canvases in the bedroom or nursery.

wondering is it possible to install stretch ceilings, it is necessary to consider the technology of carrying out this process. Film and fabric mounting has a number of differences. Before you get started, you need to know about this in detail.

Mounting methods

Learning how install a stretch ceiling in the bathroom, in the kitchen, bedroom or living room, you must familiarize yourself with existing techniques carrying out this process.

The PVC film is mounted on the base using glazing beads or special wedges. The harpoon method can also be used in this case. It is considered quite complicated, but reliable way. The fact is that there are no canvases with welded harpoons on sale. They will need to be attached to the film using special equipment. This procedure is carried out specialized organizations. The processing cost is quite high. This is due to the use of sophisticated high-tech equipment.

Most often, for self-assembly, glazing beads or wedges are used. During installation, a special hard baguette is installed around the perimeter of the room. He has certain kind profile. The glazing bead involves the use of special additional fasteners. The fabric is wound into a baguette. It is fixed with a glazing bead inside the structure.

There are also clip-on clips. First, the film is inserted into the profile. Then it is closed. The baguette securely holds the material inside. There are many various ways fixing the stretch ceiling in the profile.

Fabric ceilings are easier to mount on your own. In this case, a frame is also mounted around the perimeter of the base. The canvas is clamped in it. The difference lies in the method of stretching the material.

Preparatory stage

By studying the technology how to install a stretch ceiling with your own hands, needs to be considered detailed instructions this process. First you need to run a series preparatory work.

Remove all furniture from the room. If necessary, the walls are putty, finishing Finishing work. It is also necessary to prepare the base of the ceiling itself. It should not remain old whitewash, paint. If the material begins to crumble, this will spoil the appearance of the stretched web.

The seams between the plates should also be smeared with putty. The walls must be even. This will greatly facilitate the process of installing profiles. You should also pre-mount all communications, bring wires for a chandelier or spotlights. You can hide under the canvas ventilation box. How to install a spotlight in a stretch ceiling? With there is a specific instruction.

If you plan to install a chandelier in a room, you need to prepare a base for it. You can extend an existing hook by reinforcing it with an additional metal chain. You can also build a special base. It should not reach the surface of the canvas by a few centimeters.

Required Tools

To install a stretch ceiling in the room, bathroom or kitchen, you should prepare everything necessary equipment. There is something for everyone home master. Part of the equipment, most likely, will need to be purchased in addition.

First of all, for installation it is necessary to prepare a screwdriver and a puncher. You will also need a tape measure, building level. It is necessary to install the canvas in the profile using special blades. You will need to purchase a set of them. You will need straight and angled blades.

You should also choose a certain type of canvas for a stretch ceiling. At the same time, the operating conditions of the finish are taken into account. After that, profiles are selected. They can be plastic or aluminum.

You can choose from various accessories. They are presented in the form of multi-colored inserts. Also, if necessary, they purchase clamps, accessories for installing lighting fixtures (glue, plastic rings).

If the PVC film is stretched, you should purchase a special heat gun or building hair dryer. This equipment will allow you to properly mount the canvas.

Profile mounting

By choosing which stretch ceiling to install indoors, picking up everything necessary materials and tools, you should consider the procedure and stages of the installation itself. First you need to perform the correct marking of the walls. To do this, the height of the walls is measured in all four corners of the room.

After measurements, appropriate marks are applied to the surface. The difference in height can be about 5 cm or even more in some apartments. Having determined the smallest distance from the floor to the ceiling, it is necessary to subtract from the result the space that will be allocated for ceiling communications. If a chandelier will be installed in the room, you need to take into account the height of the platform for its fastening.

After the calculations are made using a laser level, a line is drawn on the walls in the room. It will set the profile. This mark should be perfectly level.

After that, you need to familiarize yourself with the technology of how to install a cornice on a stretch ceiling. A profile is installed along the intended line using dowels or self-tapping screws. The step between the fasteners should be 7 cm. To simplify installation, you can first glue the profile to the wall. So he won't move.

Film ceiling installation

Many novice installers ask, how many stretch ceilings are installed. It should be noted that the duration of this process depends on many factors. Professionals do all the work in one day. A novice master will need more time.

Installation starts from the base angle. Clips should be installed. They are attached to the corners of the room. First, attach one edge of the canvas. Next, the opposite corner is fixed with a clothespin. Then all the edges of the canvas should be fixed with clothespins.

After that, you need to send a stream of hot air to the canvas (at least 70 ºС). Then, alternately, the corners of the web are fixed in the profile using a spatula. Clothespins are removed. All edges of the film are fixed in the profile.

The procedure ends with the installation plastic baguette around the perimeter of the room. This decorative element can be selected in specialized hardware stores.

Chandelier for plastic canvas

It is important to consider how to install a chandelier on a stretch ceiling. There are several options for this process. Even before installing the canvas in baguettes, it is necessary to prepare a platform for lighting device.

If a chandelier hook is already provided in the ceiling, it will need to be extended. At the same time, the distance from the canvas to the base of the ceiling is taken into account. The hook will need to be reinforced. For this, steel chains are used.

If there is no hook at the base of the ceiling, a special platform should be prepared. In this case, the weight of the lighting device is taken into account. If this is a small, light chandelier, you can make two glazing beads on which the platform will be attached. A lighting fixture will be mounted to it.

It may be necessary to consider the technology of how to install a chandelier on a stretch ceiling which weighs quite a lot. In this case, the platform should be installed not on two, but on four supports. The platform should not reach a few centimeters for the surface of the web.

Chandelier installation

To install a chandelier on a plastic stretch ceiling, you need to perform a series of manipulations. It should be noted that the film under the weight of the lighting device can be deformed and torn. To prevent this from happening, when installing a PVC sheet, you will need to perform a few simple steps.

You need to purchase special protective rings made of plastic. They will prevent the destruction of the material at the installation site of the chandelier. How to install lamps in a stretch ceiling? With there is a certain method.

The retaining ring must be glued to the film in the place where the mounting platform or hook is installed under the canvas. You need to wait. When the glue dries, cut out in the center of the ring with a clerical knife round hole. An electric wire is pulled through it.

The chandelier is connected to the mains. Then it is attached to the prepared platform or hung on a hook. A decorative cap covers the installation site. If desired, you can create a system of spotlights. In this case, protective rings are also used.

Safety regulations

To install a stretch ceiling in the kitchen, in the bathroom or other rooms, you will need to use special equipment. When carrying out such work, all safety rules must be observed.

A heat gun heats air with gas. This is explosive equipment. The balloon must be correct. If its service life has expired, the gun cannot be used.

If you need to fill the cylinder, you should contact a special organization. It is impossible to perform such actions at a gas station.

Before starting work, it is necessary to check whether the hose is intact and whether there is any visible damage to the equipment. If a gas leak is detected, the unit will need to be returned for repair.

The heat gun generates high heat. It is strictly forbidden to direct the flow of hot air to the cylinder. Accurate implementation of operating rules gas equipment guarantees the safety of the master. If you ignore the recommendations of the equipment manufacturer, you can cause significant damage to property, the health of the master.

fabric ceiling

Having studied the technology of installation vinyl sheets, should pay attention to the technology of adding fabric. Such products do not have seams. Their width can reach 5 m. This allows you to mount seamless canvases in almost any room.

Fabric stretch ceilings are easier to install with your own hands. In this case, you do not need to use a heating gun. The room should be at normal temperature. This type of installation also involves the pre-installation of profiles. Strong structures should be preferred.

Installation of profiles is carried out using the same technology as in the case of a PVC film ceiling. First, marking is done, and then, using dowels or self-tapping screws, the guides are tightly attached to the wall.

Starting to stretch the canvas from the fabric should not be from the corners, but from the middle of the wall. First, a kind of cross is formed from the material. The remaining pieces are pulled from the center to the corners of the room. In this case, special blades are also used. Excess material is cut off sharp knife. Installation should be carried out so that wrinkles do not form on the canvas.

Having considered how to install stretch ceilings different types, you can complete the whole process yourself. By following the recommendations of experts, you can achieve High Quality finishes. When working, be sure to follow existing rules security. Installing a fabric web for beginners is easier than PVC films.

Quick installation and a minimum of debris - this is the main advantage of installing stretch fabrics

Stretch ceilings are a special design, which includes polyvinyl chloride or synthetic fabrics. At the same time, regardless of the material, the principle of its installation is to tension the web around the entire perimeter ceiling surface. This is in general. And if you want to know in more detail how to properly install stretch ceilings, you will have to study all the successive steps of this process.

But first, let's dwell on the advantages of this ceiling covering. How is it different from other finishes?

Advantages of a stretch ceiling

There are many of them, so let's note the most significant:

Unsurpassed appearance. It is ensured by the quality of the material, as well as the variety of colors and patterns. The latter are applied to the canvas by photo printing.
Installation of the structure does not require repair of the base ceiling, which saves time and money.
Fast installation. to install stretch fabric in a small standard apartment room, it will take only a couple of hours.
PVC fabric can withstand a large volume of water - up to 100 liters per square meter area.
Tension cloths can be installed in any premises with any purpose.
Practicality. Such ceilings are washed with any liquid detergents. In addition, they are environmentally friendly and have antistatic properties, so they repel dust.

By the way, the service life of stretch ceilings reaches 20 years. Now think about whether it is worth sparing money if, after installing the canvas, your apartment becomes the owner of a magnificent design. And for a long time.

Installation of stretch fabrics

So, back to the question of how stretch ceilings are installed.

The installation technology for all types of canvases is the same. The only difference is that the fabric materials do not need to be heated. Therefore, consider the most difficult process, which concerns PVC installations-cloths.

Determine the contour along which we will stretch the canvas

First of all, you need to determine the contour along which the canvas will pass. This will require laser level. You can also use a hydraulic level, but the first one is more accurate, and it’s easier to work with it. Therefore, we will focus on the laser.

From the surface of the base ceiling in the lowest corner of the room, you need to drop at least 3 centimeters. At this point, a laser level should be placed, which will show light lines on the walls. This is the circuit for installing a PVC ceiling.

Now around the entire perimeter, exactly along the contour, you need to attach baguettes to the walls with self-tapping screws. To do this, every 30-40 centimeters holes are drilled in the walls with a puncher, where plastic dowels are inserted. This will be the place of installation of self-tapping screws.

Scheme of installation of the web

Now you need to mount the canvas itself. To do this correctly, you need to follow a clear scheme, without deviating a single step from it:

The canvas is unfolded and one of the corners is hung in any corner of the room. This can be done without fixing it in a baguette, but using special clothespin clips. They are very similar to the mouth of a crocodile, which is why experts call them “crocodiles”.
Now, gradually, all corners of the canvas are suspended around the perimeter.
Then the canvas itself is attached to the baguettes, but not from the corners, but in the center of each wall. The result is a kind of tent.
Now go to the corners and fix the material in baguettes. And, gradually moving towards the center of the wall, insert the edges of the canvas into the baguette.
Everything happens with constant heating of the stretch ceiling.
The final touch is the installation of a plinth, which will close the junction of the walls and the tension structure.

How stretch ceilings are fixed

Installing the stretch ceiling correctly means properly fixing it in the baguettes. There are two types of fasteners, differing from each other in various constructive approaches. In addition, the mounting option depends on the material from which the canvas is made.

Scheme of the harpoon method of attaching the web

Immediately make a reservation that it can only be used for PVC mounting canvases. Where does this name come from? The fact is that two parts are involved in the connection:

First - aluminum profile that is installed on the walls. It has a special slot.
The second is a harpoon, a polymer (PVC) product that has a spike.

Fastening is carried out as follows - the canvas is fixed in a profile and a harpoon is inserted into it. It snaps into place for a strong and secure connection.

Clip fastening method

How is it different from the first one?

Firstly, a clip-on baguette is a single product. No extras.
Secondly, it is made of durable plastic that can withstand quite severe loads. Most often, this installation option is used for fabric webs.

Bead or wedge fastener method

After completing the preparatory work, we proceed to the mount

A distinctive element in it is the baguette itself - it U-shaped and made of aluminium. To fix the canvas, a special bead is used. It can be made of plastic (most often) or wood.

The edge of the canvas is simply inserted into the groove of the baguette and a bead is attached there. After that, the open edge is closed with a plinth. By the way, this is the simplest and most reliable option installation.

Summary

Installation of stretch ceilings may not seem complicated at all. But this simplicity is apparent. We did not begin to analyze the nuances associated with heating PVC sheets. And this, frankly, is a difficult and crucial moment. slight deviation from temperature regime, and all work will go down the drain. Hence the conclusion:

Stretch ceiling installation should only be carried out by professionals. And there is no point in arguing with this.

Of course, this only applies to PVC ceilings. And with fabric, you can handle it yourself. The only thing that is required of you is the exact observance of the sequence of the process.

Correct installation is the key to excellent work quality! Installation of stretch ceilings requires patience, composure, and, if you like, diligence. It is very easy, in a hurry, to irrevocably spoil the tension fabric, which requires a special, careful attitude. But by installing such a ceiling, you will long years enjoy its beauty, together with family, friends, colleagues, friends.

Stretch ceiling is one of the most successful types of finishing for basic ceilings, which, as a rule, are not a model of evenness, aesthetics and technical beauty. But, as practice shows, it is possible and necessary to fix this problem by mounting stretch ceilings, for example.

Many companies are engaged in the production of finished structures for various ceilings.

It happens that it’s quite problematic, for example, to arrange 2 level ceilings both with and without illumination.

In order not to "reinvent the wheel", it is better and easier to purchase a ready-made frame, which many companies are able to produce in 24 hours. Frames are produced the latest technologies from durable alumel alloys.

Advantages:

Ready-made modules are brought to the site, and then, the installation lasts only a few hours, moreover, we are talking about the installation of a two-level ceiling;
A quality frame is a guarantee long service life the most coverage and impeccable appearance ceiling covering;
Typical products are produced quickly, according to the customer's dimensions, due to automated production;
Assembly speeds up noticeably;
The absence of plastic, timber and plywood gives the customer some optimism and respect for the manufacturer. The “rating” of its own ceiling in the eyes of the consumer skyrockets, and not without reason.
The most daring design solutions easily feasible.

Various frame shapes various types transitions open up new opportunities, especially valuable for two-level ceilings, where "piece" and very laborious work is to be done.

Do-it-yourself installation of a stretch ceiling: everything is doable

Having made such a decision, especially since you have never done this before, you decided on some labor feat. However, there is no feat in this, since the whole matter is solved quite simply. But, determination alone is not enough.

Cloths are divided into two types.

Types of canvases:

Polyvinyl chloride or PVC - simply, a vinyl film. It is mounted using the following methods: harpoon, glazing bead or wedge.
Fabric. They are a special fabric impregnated with polystyrene.

Looking ahead a little, it is worth noting that it is easier to mount a fabric canvas, because it is not as easily damaged as a PVC canvas. In addition, the fabric web, as already mentioned, is mounted without the use of a heat gun, that is, in a cold way.

Stretch ceilings: installation methods are given below

There are several ways to install stretch ceilings.

The method that is most suitable for the consumer is used.

After watching the lesson on this topic, in the form of a video, and also, having studied the secrets, and the stretch ceiling device itself, the features and nuances of this work, in order to eliminate all kinds of errors, you can safely take on self-assembly. It would not be superfluous to study the reviews of those who did this work on their own. Do not regret this time!

Available ways:

Shtapik system. The principle is simple. The bead is inserted into metallic profile. The bead fixes the canvas quite firmly. budget method. The main disadvantage of this installation method is that frequent dismantling of such a system is simply contraindicated, which is not always good, especially if you are often flooded with neighbors from above.
wedge system. It has some similarities with the previous one, only a wedge is used instead of a glazing bead - it is also inserted into the profile, and thus the canvas is held. This method is not used very often, and is mainly used in wet rooms. The development is imported, and quite expensive, with undoubtedly high quality.
"Pin". They are used only for the installation of stretch ceilings, where seamless fabric is involved. There are no glazing beads or wedges - everything is arranged on the principle of a self-locking lock. Such a system is also not cheap, therefore, the design is also not often applicable. This technology was conceived and developed in order to be able to install the ceiling with your own hands, however, this idea, simply did not take root.
Harpoon system. In this method, instead of a glazing bead, a harpoon edging is used, which is welded to the ceiling sheet. There are different types of harpoon systems, but basically only one of all available is applicable. The harpoon system is not simple, however, it does not require super qualifications of the performer. However, everything is based on very accurate measurements.

So, after all, the most popular ways of installing stretch ceilings are the glazing bead system and the harpoon system.

The order of installation of stretch ceilings: in stages

The procedure for installing stretch ceilings is a process that does not tolerate haste and fuss. All work, from beginning to end, must be done thoughtfully and slowly.

The speed of work depends on how all the installation rules are observed, as well as whether the sequence is followed, and, of course, their good result in the end.

Proper installation has a clear sequence of all stages, of which the described installation work consists.

Stages:

Markup. It all starts with the marking of the walls, and it starts from the corners. The markup should be done based on the fact that under the stretch ceiling there should be a fixture fixture, or a chandelier. The base angle is taken as the most low angle in room. After the corners are marked, it remains to connect them with a straight line, and then on help will come laser level. A baguette will be attached along the received line.
Profile attachment. The profile is attached to the walls, for this, dowels or self-tapping screws are used, the distance between which should not exceed 8 cm. Correct installation profile - this is 50% of the work, and the key to successful, as a result, stretching the canvas.
Canvas installation. The canvas is mounted only if the temperature in the room has reached + 40 ° C. The conditions are comfortable, you can’t name it for an installer, but, nevertheless, this condition is spelled out in such a document as an instruction.

Thus, you see that there is nothing impossible here, all of the above is quite within the power of even the average apartment owner.

The process of installing stretch ceilings: step by step

Removing the fabric from the packaging with clean hands. It is laid out on the floor, which must also be clean, where there is no debris, dust and small metal parts, say, dowels.

These so-called "little things" are able to ruin the canvas even before installation!

The process of installing the canvas is a rather responsible event, therefore, it is very important to follow the strict sequence of each step in the installation.

Step by step:

The canvas is fastened starting from the corners (diagonally!), From the base corner, and the next corner, as already mentioned, will be the opposite, etc. Should gas gun warm corners. To better understand the whole process, you need to use the instructions attached to the material.
The fastening of the corners is carried out using the so-called "crocodiles" - special clips with a gasket that protects the canvas from possible damage.
Carrying out further heating of the film, you need to remove the "crocodile" from the first corner, and, using a spatula, which is inserted into the groove of the edging of the canvas, we fill the canvas into a baguette. Moving, thus, to the next section, the previous section is held by hand, preventing involuntary return of the film from the seat.
The rest of the corners are attached in the same way. Since all the difficulties lie closer to the end of the work, therefore, an assistant, perhaps more than one, would not hurt you.
After that, we fix the film on the walls using a straight spatula. Places where there are seams are fastened with locks, the number of which varies from 2 to 3. You can more accurately understand the process by studying photo and video materials.

In addition, it is better to study step-by-step instructions using special drawings in parallel that complement it well.

Installation instructions for stretch ceilings: read carefully

Right, quality installation system is unlikely without studying the appropriate instructions.

In order to prevent marriage in work, despite the fact that the timing of the repair is running out, it is necessary to study the characteristics of the tension web, component elements. In addition, you should not neglect safety at all.

The installation of stretch ceilings is associated with some difficulties, which are present due to the specificity of the ceiling material, the accuracy of measurements, and also due to the use of a gas gun.

Instruction:

In the process of all work, it is necessary to ensure that all kinds of wrinkles and folds do not appear on the canvas. A mistake noticed in time is not so terrible, and, as a rule, it is quite fixable. If, nevertheless, it so happened that you noticed the defects with some delay, then you can and should try to eliminate them with the help of a heat gun, warm up this area, then slightly smoothing it with your hand.
At the final stage of installation, when the installation of fixtures remains (they are installed on special racks that are not at all difficult to detect under the canvas), carefully make holes in the places where it is needed.
Ceiling plug installation is last step at work. The plug is a masking tape of the most various colors and shades. It is installed in the gap between the walls and the ceiling, which was formed due to the thickness of the profile. Easy to install with fingers.

Instead of a plug, often a wide baguette is used.

Material on how to choose a profile for stretch ceilings will also be useful:

When choosing a fabric ceiling sheet, the installation practically does not differ from the installation of a PVC sheet, with the difference that there is no need to use a heat gun, as well as soldering the sheets.

Installation of stretch ceilings (video)

In conclusion, it is worth summing up everything that has been said. Installation of ceilings, of course, can be done by yourself, since the scheme is simple, as evidenced by the numerous reviews of people who have already done it on their own, without the help of craftsmen. And yet, the installation of a stretch ceiling of any design requires special care and diligence in order not to damage the film of the canvas. As already mentioned, before this you need to review the relevant materials in order to avoid any kind of errors. And, of course, it is worth remembering the technique fire safety when working with a heat gun! There were different things: a fire, and even an explosion. However, this should not happen if all security measures are taken and taken into account. And one more thing: if you invite a team, check with them OKVED codes, which are given to them during the registration of the state of emergency, in order to know whether they have the right to engage in this activity. Good luck with the repair!

They have long ceased to be considered a luxury, but five or six years ago it was an expensive pleasure. In addition, the installation technology was kept secret by the masters. Today, almost any beginner in this business can do it with his own hands.

This article details the rules for calculating and installing from PVC film(PVC). Glossy and matte ceiling paintings have affordable price, and wide color palette produced material will help transform the interior of any home.

In addition, the PVC ceiling membrane will protect the room in case of flooding from above. It is easy to remove water from under the ceiling, and the canvas, after warming up, will take its previous shape.

Stretch ceiling installation technology

With my own hands determined by the following action plan:

Measurement and calculation of the ceiling canvas and accessories
Installation of wall profile - baguette
Installation of lighting wiring and installation of fasteners for chandeliers and spotlights
PVC fabric stretch
Installation of lighting devices

PVC ceiling will protect the apartment from the flood

Do-it-yourself measurement of stretch ceilings is a very responsible operation. It will require maximum precision and diligence from you. First of all, take a blank sheet of paper and draw a plan of the room (top view) on it. Be sure to display all the protruding parts (pilasters) and recesses (niches, bay windows).

Label each corner with a letter of the Latin alphabet, starting from the lower left corner (A, B, C, D ...). Measure all the walls of the room and transfer the dimensions to the drawing. Be sure to measure the diagonals. Also list them on paper.

Idler fastener PVC ceiling produced on a special profile or harpoon-type baguette. A flexible harpoon is welded to the edge of the ceiling cloth. Getting into the groove of the baguette, the harpoon clings to the protrusions of the walls (like a harpoon or a fishing hook).

The baguette is made of aluminum or plastic. The length of the rail is 2 m. To calculate its quantity, you need to add the length of all the walls of the room.

Baguette installation

This procedure is no less responsible than measuring the ceiling. It depends on how firmly the fastening is made, whether it can hold the tension of the web or not. Before installing the wall profile, the walls are marked.

It is important to know! The stretch ceiling can be lowered 3 cm from the existing ceiling. If use point devices lighting, then the level of the canvas is lowered by at least 12 cm.

Marking is conveniently performed using a laser level. If it is not there, then the usual water will come off (a transparent hose with two graduated flasks filled with water).

According to the marked marks on the walls, the horizon of the future ceiling is beaten off. This can be done with a painter's tape (a cord with blue in a plastic case). The marking is over, the baguette is attached to the walls with dowels and self-tapping screws. The fastening interval should be no more than 10-15 cm.

At the joints of two baguettes, the fastening step should be no more than 2 cm. If a baguette was trimmed, then this place must be cleaned of burrs with a file or sandpaper.

Important to remember! It is impossible to dock a baguette in the corners. All joints are transferred to straight walls. In the corners, the baguette is cut on one side and bent at the required angle.

Wiring and lighting fixtures

To install the chandelier in the center of the room, you can use a mounting hook. For this in concrete floor a hole is punched with a perforator and a piece of reinforcement with a diameter of 10 mm and a length of 20-30 cm is inserted into the void of the slab. A chandelier hook will be hung on it in the future.

You can also use self-tightening anchor bolts with hook. If the chandelier is a consignment note, then a plywood embedded part must be placed in the place of its fastening. On a rectangular piece of plywood 10 mm thick, direct hangers for a plasterboard ceiling are attached at the corners.

Suspensions are bent in the form of the letter G on desired height and fasten with dowels to the ceiling. Then, after stretching the fabric, the chandelier is mounted, but more on that later.

The wiring is placed in a plastic corrugated sleeve and fixed to the ceiling with clamps. At the points of connection of lighting points, loops of wire 25-30 cm long are released. Adjustable racks of spotlights are also mounted to the ceiling with dowels.

Stretch ceiling fabric

The room is heated with a special gas (propane) gun. The temperature is controlled by a household thermometer (it must be at least 60 degrees C). It is recommended to remove fusible plastic products, live plants and an aquarium from the room.

Previously, the canvas is laid out on the floor, and then it is fixed with clips (crocodiles) in two opposite corners. The first corner is basic (it is marked in the instructions that come with the canvas). The heated canvas is filled with a spatula into the groove of the baguette until the harpoon clicks, catching on the protrusions of the walls. Below is a diagram of the filling of the ceiling cloth.

When the canvas cools down, it will stretch and it will be possible to mount lighting devices. The location of the chandelier or the anchor hook is groped by hand and in its place special glue stick a plastic thermal ring. After 4-5 minutes, a film is cut out inside the ring with a sharp knife and a loop of lighting wire is removed.

The chandelier is hung on a hook and connected to the power supply. After that, the chandelier cup is fixed under the stretch ceiling. For an overhead chandelier, a large thermal ring is glued, and after removing the film, the mounting plate of the chandelier is fixed to the plywood with self-tapping screws. The installation is completed and if you have any questions, then in this video the installation of a stretch ceiling with your own hands is shown in great detail.

– great option finishes for any kitchen, because this lining is practical, durable and aesthetic. And it is natural that everyone who makes a choice in her favor is interested in the question - how to install the ceiling with your own hands? And is it even real? The answer is unequivocal - yes, the stretch fabric can be installed without the help of professionals. The main thing is to know the technology and understand all the stages of work. Next, we invite you to learn about these rules, as well as watch the accompanying photos and videos of installation, which will greatly facilitate your task of transforming the kitchen.

Mounting tools

To install a stretch ceiling in the kitchen, you will need the following tools:

heat gun;
building level;
perforator;
gas cylinder for a gun;
ladder;
self-tapping screws and dowels;
Screwdriver Set;
a hammer
fixing locks;
knife with a set of blades of different formats;
scapula.

After preparing the necessary tools, proceed to the selection of materials. First, calculate the area and perimeter of the kitchen ceiling, and then go buy baguettes, ceiling canvas and soundproofing materials.

Baguettes are plastic or aluminum strips that together form a fixing profile. If you want the ceiling in the kitchen to please with its functionality for as long as possible, do not save money and choose an aluminum profile - it is stronger and more reliable than plastic.

The ceiling cloth is fabric or vinyl material, which will stretch on the profile. For kitchen better fit vinyl because it is more practical.

Soundproof materials are mineral wool or slabs that will protect you from the noise from the neighboring upper apartment. It should be noted that soundproofing is only a matter of comfort, since even without it, ceilings will successfully cope with their immediate functions.

Preparatory work

The second stage of arranging a stretch ceiling in the kitchen is rough procedures. First you need to free the room from furniture and appliances that cannot withstand the effects of a heat gun. Then it is necessary to clean the ceiling from the old coating and all sorts of contaminants.

If there are inter-tile seams, they should be poured mounting foam. whole surface ceiling must be treated with a primer - it will protect the surface from fungus and mold. If the ceiling is too deformed, it is better to sheathe it with drywall - this way you get a perfectly even base for the stretch fabric.

At this stage, sound and heat insulation is also installed, if necessary, and air ducts for ventilation and other communications are equipped.

Advice. Decide in advance where and how they will be attached ceiling lamps- it is important for them to install mortgages at the stage of draft procedures, so that in the future there will be no problems with the installation of the lighting fixtures themselves.

Installing a profile

The third stage is the installation of baguettes. You can install them in two ways: to the wall or to the ceiling. Recommend to choose wall mount, since with a ceiling can not be hidden under tensile structure necessary kitchen communications and wiring.

The procedure for installing baguettes includes the following work:

determine the height of the future ceiling and, using the building level, make markings on the walls around the entire perimeter of the room;
according to the finished marking, attach the first baguette to the wall surface and drill holes in it for self-tapping screws;
install the dowels in the prepared holes and fix the bar with self-tapping screws;
install the second baguette butt to the first and also fix it with self-tapping screws;
install all subsequent strips in the same way.

Advice. To ensure that the ends of the planks fit as tightly as possible, saw them in advance at a slight angle - approximately 30 degrees. And the ends of the corner baguettes need to be cut at 45 degrees.

Ceiling sheet installation

The fourth stage of work is the direct tension of the canvas. Before starting the procedure, be sure to warm the room with a heat gun to 40 ° C. Further work is performed in this order:

Unpack and straighten the material. Warm up the cloth with a gun.

Attention! If you are using fabric instead of traditional PVC fabric, it can not be heated!

Fasten the first base corner using "crocodiles" - special clips covered with soft material that prevents deformation of the canvas. What kind of ceiling angle is the base one is indicated in the instructions for the stretch ceiling. It should also come with clamps.
Fix the second corner - opposite to the base one.
Fasten the third and fourth corners.

Gently reheat the canvas again. Remove the clip from the base corner. Insert the spatula into the blade shell through a special groove. Start slowly winding the canvas into the baguette and secure it with locking locks. Insert the canvases into the profile in the same way at all other corners.
Fasten the canvas in the profile along straight sections using the same locks and spatula.
Unfold the canvas and check all fasteners.
Install the fixtures: in the right places where the mortgages are prepared, carefully cut the holes and mount the fixtures.

As you can see, installing stretch ceilings in the kitchen with your own hands is not an easy task, but absolutely doable. Adhere to proven technology and do not neglect the installation rules - this is the only way you can get a quality result that compensates for the effort, money and time spent.