TITEBOND II Premium Wood Glue is a leading brand. A one-component adhesive that meets ANSI Type II water resistance standards. It is ideal for outdoor applications, including garden and outdoor furniture, birdhouses, mailboxes, picnic tables, etc. The adhesive has a strong initial set, fast cure rate, it forms a strong bond, handles well, and allows indirect food contact ( bonding cutting boards), ideal for use in high frequency adhesive systems. The range of its application is extremely wide: from gluing at home to cold, hot and HF presses in furniture factories.

Meets ASTM D-4235 requirements

Product Features

• First adhesive to meet ANSI Type II water resistance requirements;
• For outdoor use;
• Perfectly processed;
• Does not affect finishing coatings;
• Allows indirect contact with food products;
• Ideal for use in HF and hot presses;
• Easy to clean with water;
• Load group according to EN 204/205 1K/D

Physical properties

Warp: Cross-linked PVA CalculatedVOC: 5.5 g/l
State: Liquid White point temperature: 12.7 °C
Color: Honey yellow Dry residue: 48%
Dry film: Translucent, yellow pH: 3,0
Density: 1.09 g/cm 3 Viscosity: 4000 mPa*s
Freeze-thaw cycles: Stable

Shelf life 24 months in original packaging at 23 °C

Strength adhesive connection to ASTM D-905 (hard maple)

Directions for use
Application temperature: above 12.7°C
Working hours: no more than 10 minutes (at 21°C and 50% humidity)
Total build time: 10-15 minutes (at 21°C and 50% humidity)
Minimum consumption: approximately 162 g/m2
Applied pressure: it is enough to combine the surfaces to be glued together (7-10 kg/cm 2 for soft wood, 9-13 kg/cm 2 for medium wood, 13-18 kg/cm 2 for hard wood)
Application method: plastic bottle with a flat spout, application by roller or brush.
Cleaning: Undried glue is removed soft cloth. Dried glue is removed mechanically.

Restrictions:
Titebond II Premium Wood Glue is not suitable for use in conditions of constant dampness or below water level. Not used for load-bearing structures (trusses, rafters, load-bearing beams). Do not use when the temperature of the adhesive or parts is below 12.7°C. It is recommended to test the adhesive on samples of the materials being bonded.

Best before date: It is best to use the glue within 24 months from the date of production. It is recommended to stir the glue before use. The glue is stable in freeze-thaw cycles, but before use it must be heated at room temperature without additional heating devices and mixed thoroughly at low speed.

Adhesives for floor coverings

High-quality installation of floor coverings requires compliance with the technology for performing this process and the use of correctly selected adhesive compositions, which are presented in wide range in the consumer market.

It is quite easy for a simple buyer to get lost among this diversity. Knowing important criteria, you can choose an adhesive that will provide reliable fixation floor covering and protect it from swelling and deformation.

Today to everyone building materials, including adhesives, are subject to strict quality and environmental safety. Franklin Int. produces products that do not contain harmful components and are different high quality, excellent performance properties.

How to determine the quality of glue?

Take our advice into account.

The most important indicator of glue quality is its high adhesive ability. The higher this indicator, the better the glue. In second place is adhesion (sticking force), which ensures the most durable bonding of various materials.

No less important characteristic is the drying time of the adhesive, which must be taken into account when laying floor coverings in rolls.

The drying speed is affected by the composition of the adhesive and the presence of organic or inorganic functional compounds in it.

The quality of the glue can also be judged by its elasticity. That's why elastic adhesives Franklin companies are ideal material for laying floor coverings.

The moisture resistance indicators of the adhesive composition play an important role when it comes to working with them in bathrooms, saunas, swimming pools and other rooms with high humidity.

As for wood flooring, for their installation it is necessary to choose an adhesive that does not contain water. This means that polyurethane glue is ideal for working with wood.

Types and characteristics of adhesives

There are polymer and polymer-cement adhesives for floor coverings.

Using polymer-cement adhesives, tiles, artificial and natural stone. Adhesive cement ensures reliable adhesion of durable and hard materials.

Polymer adhesives are used for laying linoleum, wood, laminate, and carpet. Adhesives of this type have high performance elasticity, strength, resistance to aggressive environments.

In addition to the above compounds, acrylic mixtures and PVA glue, which contain water, are widely used for laying floor coverings. They are characterized by high adhesion and the ability to transmit steam. The presence of liquid rubber in polyurethane mixtures and the absence of water make them universal.

Before you start working with flooring adhesive, you must carefully study all technical specifications and manufacturer’s recommendations, type of material, operating conditions.

If the chosen glue is suitable, then you can start working. If you encounter difficulties when choosing an adhesive composition, it is better to seek help from a consultant.

Where to buy quality flooring adhesive?

Our company Vector offers high-quality adhesives from famous manufacturer Franklin. In the catalog presented on our website, you can familiarize yourself with the range of products offered.

We offer favorable terms of cooperation: affordable prices, prompt delivery, convenient payment. By phone you can contact us, get a free consultation and place an order. Call!

Flooring adhesives from Franklin Int. created for those who care about the quality of fixation of materials. Parquet, linoleum, carpet, plywood, chipboard, MDF and other coatings will be securely fixed and will retain their properties for a long time original appearance, thanks to a variety of unique adhesives from Franklin Int.
Flooring adhesives from Franklin Int. are produced without solvents, which ensures safety for environment, and a wide range of products meets the needs of professionals at all stages of installation and repair work: both drafts and elite finishers. Our specialists will help you choose the required adhesive taking into account the properties of the floor covering.

Wood adhesives are very popular in furniture production and carpentry. Craftsmen consider Titebond glue (Titebond), or rather, its entire line produced under this brand, to be a quality product. The manufacturer, the American company Franklin International, monitors product quality and also guarantees the highest moisture resistance of the compositions among analogues.

Types and scope of application of glue

Titebond wood adhesives are high quality joinery compounds for professional and home use. They have different bases depending on the specific purpose: artificial rubber, polyurethane, aliphatic resins. The products also contain polymers, protein compounds, water, various modifiers and plasticizers.

In total, there are 25 types of adhesives in the Tightbond line, but on the domestic and European markets the most common are universal one-component products with strong water-repellent properties. Their technical characteristics are unique: when proper preparation base and following the instructions, the adhesive seam will be practically unaffected by moisture. Most adhesives can be used for the following purposes:

• styling parquet board at home, in offices;
• restoration of old wooden coverings;
• furniture assembly;
• gluing wooden and plastic parts;
• production of plywood products;
• various repair work.

Depending on the specific type of waterproof glue, its properties and purpose may vary. Main types adhesive compositions"Titebond":

1. Original Wood Glue. Adhesive with a red label is used for repairs, restoration musical instruments, in the production of similar products. After drying, it forms a hard, low-plastic joint that does not interfere with the normal sound and does not change the properties of the wood.

1. Titebond II Premium. This tool has a blue sticker, it is also moisture resistant, and is not susceptible to solvents. The adhesive seam will be quite elastic, the initial setting will be more powerful. Due to its environmental friendliness, the glue can be used for gluing wooden cutting boards and other products in indirect contact with food. Also, glue number 2 is used for repairing indoor, garden, and other outdoor furniture, mailboxes, products made of veneer, laminate, plywood, fiberboard, chipboard. It is packaged in bottles, jars, buckets and even barrels with a volume of 0.037-100 liters.

1. Titebond III Ultimate. Titebond 3 adhesive with a green sticker is available on water based, has an opaque consistency, creamy color. All polymers in the composition are harmless to health, so the product is well suited for products that come into contact with food. Most often, glue is used in food industry, but you can also use it for repair, restoration of plywood, veneer, and other types wooden surfaces, as well as plastic. It is suitable for outdoor and interior works, but not suitable for products placed in water.

1. Titebond Heavy. It's super strong assembly adhesive, comes in a yellow tube. It contains artificial rubber, due to which it does not harm any type of wood, and can even be used for gluing wet, frozen wood. The finished adhesive seam is elastic, not subject to destruction, flexible, and does not deteriorate from mechanical impact. In addition to wood, this glue is suitable for gluing ceramics, slate, organic glass, natural and artificial stone, fiberglass, concrete, ceramic parts.

Glue characteristics

Despite the possibility professional use, the products in the series do not require special skills or knowledge during application. They are easy to use; you just need to read the instructions carefully. A regular tool, including a metal one, is suitable for the job; the glue does not stick to the metal, and all devices can be easily cleaned.

The main property that distinguishes Titebond adhesives from PVA is liquid nails, is a high moisture resistance that meets American standards.

Other properties and technical parameters Titebond adhesives:

1. All adhesives become transparent after hardening, despite the initial dullness of the consistency. They can be applied even to delicate items.
2. The products are frost-resistant; after drying, the seam will withstand temperatures down to -35 degrees. Also, glued bases can be heated up to +40 degrees, but at +100 the seam area can catch fire.
3. The strength of the glue joint will be very high, much higher than the wood itself. This determines the durability of the glued products. The seam is resistant not only to water, but also to the influence of solvents and acoustic vibrations.

1. Adhesives are universal, they are suitable for all types of wood, as well as other wood-based compounds, combined materials, and many types of plastic. You can also effectively fasten paper and cardboard with these products. Elastic compounds are suitable for use as sealants.
2. All errors in work - stains, drips - can be washed off with water before complete hardening. This is very convenient for adjusting the adhesive seam.
3. Polymerization of the composition is quick (10-20 minutes), but still not instantaneous, and it is quite possible to correct the position of the parts. As humidity increases and temperature decreases, polymerization may slow down. You cannot work with the composition at temperatures below +10-12 degrees.
4. There is no need to subject the parts to strong compression or installation under a press. They will stick together even with a moderate degree of fixation, adhesion will not decrease.

The most popular adhesives of the Titebond brand have a dry residue of 48%, their viscosity is 4000 mPa/s, and their acidity is 3 pH. Material consumption is 180 g/sq.m. see. After opening, each product remains suitable for use for a long time (up to 2 years) if stored at a temperature of about +20 degrees. It is not advisable to apply the composition to painted substrates; use it in rooms with too high humidity or poor ventilation.

Instructions for use

You can start working with the product only at positive temperatures indoors or outside buildings. For all types of adhesive compositions it is very important preliminary preparation surfaces: in the presence of dust, sawdust, and other contaminants, the degree of adhesion may decrease. In addition to such contaminants, grease, oil stains, and old paint should also be removed. For this purpose, the following methods are used:

• grinding with a special machine, sandpaper;
• using a scraper;
• washing with household or professional detergents;
• wiping with degreasers and solvents.

Before work, mix the glue thoroughly, apply it to both parts, and press them well. It is not necessary to use a press, but it is necessary to prevent possible movement of the products. The drying time is 10-20 minutes; during this period, you can remove the glue that has come out with a rag, a napkin, or change the positions of the parts.

Work only in a well-ventilated area. Due to the environmental friendliness of the composition, you can not use special means respiratory protection, but for allergy sufferers, people with hypersensitivity and lung diseases, masks (respirators) are required. If you feel dizzy, you should immediately leave work and go to work. fresh air. If glue gets on the skin, it must be washed thoroughly with soap, otherwise there is a risk of irritation and redness. When the product gets into the eyes, rinse them well (at least 10 minutes), and if necessary, consult a doctor.

Titebond glue is one of the highest quality and convenient products that does not need to be diluted, but can be used in finished form. It has the highest moisture resistance among similar compounds and is economical, which is why it is most often used by professionals.

The only one-component adhesive that meets the most stringent ANSY TYPE II standard for moisture resistance

• Provides strong initial set and short pressing times
• Ensures the strength of the adhesive joint is higher than the strength of the wood itself
• Non-abrasive: does not spoil cutting tools during final processing
• High resistance to heat and solvents
• Resistant to acoustic vibrations
• Remove with a damp cloth before drying

Physical properties

• Base: cross-linked polyaliphatic emulsion
• Condition: viscous liquid
• Color: cream, after drying translucent cream
• Dry residue: 48%
• Viscosity: 4000 mPa*s
• Acidity ph: 3
• Flash point: 100°С
• Freeze resistance: stable
• Shelf life: 24 months in original packaging at 20°C
• Moisture resistance class: D3

Directions for use

• Application temperature:+ 12°C
• Operating temperature:-30...+50°С
• Consumption: 180 g/m2
• Working time: 10-20 minutes depending on conditions.
  Working surfaces must be dry, free of oils, grease, dirt, loose old paint and any other materials that reduce adhesion
• Cleaning: clean with water before drying. After drying, excess is removed mechanically

Peculiarities

• Freezing does not change the structure of the glue, but leads to its thickening
• After long-term storage, mix the adhesive thoroughly before use to restore its properties.
• Meets the requirements of ASTM C557 (USA) and AFG-01 D3498 of the American Plywood Association, DIN EN204 D3

Use for underwater connections

Precautions

Use only in well-ventilated areas. May cause skin irritation. If dizziness or other unpleasant effects occur, you should go out into fresh air and consult a doctor. If glue gets into your eyes, rinse them for 15 minutes. running water. If glue gets on your skin, wipe it off and wash your skin with soapy water.
Keep the glue out of the reach of children!
Use only for its intended purpose.

Packing

Store and transport at t > 5°C.

When doing carpentry work, you often need a tool that allows you to connect parts without nails and screws. This is what glue is Titebond, in the production of which it is used different basis: components can be proteins, polymers, synthetic rubbers, polyurethanes, aliphatic resins.

Varieties

There are several types of Titebond adhesive compositions:

• ABOUToriginal Wood Glue Titebond (red sticker). After drying it becomes hard and non-plastic. Designed specifically for repairing or making musical instruments and does not spoil the sound of the wood.

• Titebond II Premium (with sticker blue on the packaging) is moisture resistant and not sensitive to solvents, so they cannot be used to return the liquid consistency to hardened glue. Forms a more elastic seam compared to Original Wood Glue. The composition is perfect for repairing garden or street furniture, mailboxes, as it has a strong initial adhesion and quickly becomes hard. As a result, a strong connection is formed, for which indirect contact with food products is allowed (for example, you can glue cutting board). The adhesive meets the requirements of ASTM D-4235. Since it is very widely used, Titebond II Premium It is packaged in a variety of containers, for example, in small bottles of 37 ml and in large containers up to one thousand liters.

• Titebond III (green label on bottle) is a cream-colored, water-based adhesive material used for bonding food contact surfaces. The composition is based on polymer, without solvents.

• Titebond Heavy Duty - the strongest of the entire presented line, it can be used to glue brick, concrete, fiberglass, slate, ceramics, hardboard, decorative stone. The main component is synthetic rubber. Heavy Duty It is effective even when connecting the surfaces of damp and frozen wood, creating a flexible seam that can withstand mechanical stress.

Characteristics

Titebond glue belongs to the professional category, but it can also be used at home, since the adhesion process does not require special skills and knowledge. You just need to follow safety rules and adhere to the manufacturer's recommendations for using the product.

Wood glue Titebond has the following characteristics:

1. Produced on the basis of aliphatic water-based resin.
2. As a result of gluing, a reliable seam is formed, several times greater than mechanical strength wood.
3. Glue does not stick to metal surfaces, which makes it possible to use a non-specialized, ordinary tool.
4. It can be used on any type of wood; the age of the wood also does not matter.
5. Effectively, plywood, cardboard, paper and other products of the wood processing industry.
6. Can be used as a sealant when sealing joints.
7. Before hardening, the composition can be easily washed off with water, so it is very easy to correct errors in the connection. For the same reason you cannot use Titebond, if the surfaces to be fastened are moistened with water (wet).
8. The glue has a viscous, viscous consistency, due to which polymerization occurs quickly, in 5-10 minutes, depending on environmental conditions (humidity, temperature).
9. The Titebond composition cannot be used for adhesion of painted surfaces, as well as in rooms with high humidity and insufficient ventilation.
10. There is no need to place the glued area under a press to improve adhesion characteristics.
11. After hardening, the product becomes transparent, liquid state has a light creamy tint.
12. Resistant to solvents and freezing after drying (withstands up to –30° C), tolerates elevated temperatures up to +40°, but ignites at +100° C.
13. After opening the package, the adhesive is suitable for use for two years, provided effective protection from contact with air and air temperature +20° C.
14. The average consumption is 180 g per 1 cm2.
15. Glues effectively at ambient temperatures from +10° C.

Advice! Before joining, thoroughly clean the surfaces of sawdust, dust, shavings and other debris.

The composition can be used when assembling furniture, including for gluing decorative plastic components. Products Titebond in most cases they are used in the production of plywood, furniture, wood-based flooring, and finishing of wood products.