DIY rocking chair (44 photos): drawings, options, tips. How to make a wooden rocking chair: we equip a place to relax Rocking chair made of wood

Many of us are familiar with such an interior item as a rocking chair, which can be found in many country houses. For most, it is one of the favorite vacation spots, but not everyone knows that everyone can make such a chair. However, first you need to acquire certain knowledge, skills and prepare a tool.

AT last years rocking chair has become a fairly common piece of furniture. In the range of many furniture companies you can find a large number of models of rocking chairs designed for use in apartments and offices. Moreover, among them there are models made in the classic version by the weaving method, as well as modern products that fully meet the requirements of high-tech style.

Benefits of a wooden chair

Before you start manufacturing, you need to decide what material to use for it as a basis. Although there are many options, the wooden chair is the most common. Therefore, further list the advantages that this material has:

environmental Safety. For many years, wooden furniture has been very popular among consumers, which provided it with such qualities as natural origin, safety and hypoallergenicity. Therefore, the owners of wooden chairs do not face any inconvenience in the process of using it, because they are confident in the environmental friendliness of this material;
strength and long service life. Wood is a fairly durable material, which was transferred to the furniture made from it. In addition, it perfectly tolerates mechanical stress and demonstrates a long service life;
attractive appearance and variety of forms.

Rattan rocking chair

We repeat that rocking chairs today offered in large quantities most various options. One of these products is a rattan rocking chair, which not only has a pleasant design, but is also able to perfectly harmonize with other elements of the cottage interior. The birthplace of rattan is South America, and this plant itself is often referred to as a flexible liana.

Of the features of this material, it should be noted high strength, in which it is capable compete with wicker.

The technology of manufacturing armchairs from this culture is characterized by the fact that instead of traditional joints based on screws and bolts, glue and skillful knitting are used. Alas, it is impossible to buy this tree in our country, so most owners country cottages it is impossible to make such a chair with your own hands.

Wicker rocking chair

A photo of the options available today for this piece of furniture allows us to judge that a wicker rocking chair is quite in demand today. It can be found in cottages and even in apartments in many regions of our country. Willow vine is used as a material for it, and the finished chair itself fits well into the interior. garden house, cottages and even garden greenery. consumer rocking chair willow vine attracts primarily because of its low weight and high strength. However, such furniture has one serious drawback: excess moisture negatively affects the material, so in wet weather it is not recommended to keep such chairs on the street.

Materials for manufacturing

Regardless of what type of wood you decide to use to make a wicker chair, you must have certain skills. The tree is affordable and easy to process, so many owners who are thinking about making a rocking chair with their own hands most often consider using wood as the basis for it. But first it is necessary prepare certain tools for making furniture:

electric jigsaw with a set of knife blades;
disc grinder with a set of coarse and fine-grained nozzles;
screwdriver with drills;
tape measure and corner with a ruler;
hammer and spatula;
brush and pencil.

Execution of the drawing

Even before you start work, you should consider that in order to make a quality rocking chair with your own hands, a drawing is required.

Having a sketch in hand, you can avoid serious errors in terms of product dimensions and correctly determine the quantity of materials that you will need to make.

First you need to take metal mesh, each cell of which corresponds to 1 cm, and outline on it a template for the side of the chair. To further make it more convenient to work, it is recommended to transfer the created chair template to plain paper. So it will be easier for you to mark the outline of the chair already on the plywood itself. Do not worry if small errors are made. Here it is important to maintain the symmetry of the sidewalls and avoid protruding corner elements on the outer rolling part.

To do this work, we need plywood 3 cm thick, from which three drawers are cut dimensions 120 x 800 mm. Sidewalls are made using electric jigsaw exactly on the pattern. After that, you need to take a beam 50 mm wide and 25 mm thick and cut out 35 fragments from it, each of which should be 120 cm long. The finished bars will later serve as a seat and back for us.

Try to get as much timber at the very beginning to minimize waste. This will be quite easy to do, given that you can calculate the total length of the timber even before buying. Say, if it has a length of 2.3 m, then it is better to make the chair narrower. As a result, its width will decrease to 115 cm, however, this will allow you to avoid waste. The given dimensions of the rocking chair do not require their exact observance. Therefore, if in the course of work it becomes clear to you that it would be better to increase or decrease the size to minimize waste, you can do it without fear.

Workpiece processing

Surface treatment of workpieces is carried out using grinder. During the operation, it is necessary Special attention give them to the ends. If, during work, wood fibers protrude on them, then you need to use a hammer and level them, and then process them with hot drying oil. So you will make the ends of your furniture more resistant to moisture, which will positively affect its service life. When the drying oil dries, it is necessary to carry out reprocessing to fix the result.

The assembly of the chair is carried out, focusing on the drawing of the rocking chair. Need fasten the two sides, used kings. But first you need to mark the places where they will connect.

According to common schemes for the manufacture of rocking chairs, it is recommended to fix them in the head area, in the middle and at the legs. When you have to fasten the tie bars to the sidewall, use a confirmation for this. This name is given to a special screw screed, with which they are fixed wood materials. First, before fastening, it is necessary to create holes in the sidewall 8 mm and in the end of the drawer side 5 mm.

Next, we begin work on creating the seat and attaching it to the base. We take earlier cooked 35 pieces of timber, in which you need to make four holes for two on each side. After that, the bars must be fixed to the sidewalls. Given the number of holes present, it is recommended to fix the bars with 3 or 4 mm self-tapping screws. During the fastening of the boards, constantly check the horizontal position of their installation.

Finished product processing

If we turn to the experience of making rocking chairs made of wood and plywood by ordinary owners with their own hands, we can identify a number of serious mistakes made after assembly. Among them, I would especially like to dwell on poor-quality finishing or its absence. In order to do everything right and ensure the chair has the longest possible service life, it is necessary do the following:

process the hole above the screws with putty;
cover with a layer of antiseptic;
apply waterproof varnish in two or three layers.

If you perform all the above work exactly, you can be sure that a rocking chair made by yourself will be able to please you for more than one year.

If you are going to start making a rocking chair with your own hands for the first time, then it will be useful for you read the recommendations experienced craftsmen who have done this work more than once:

Other types

One of the varieties of this piece of furniture is wooden Baby chair . It is done according to the same scheme as described above, however, you need to adjust the size for the age of the child. This also applies to the tilt of the backrest and handles. Quite often, child seats are made in the form of a horse.

Of particular interest is the rocking chair for the office. The peculiarity of its manufacture lies in the fact that leather is used for facing, as a result of which the product acquires a respectable and solid appearance. With such a chair at hand, a person will have the opportunity to relax and unwind during the working day.

Conclusion

Despite the fact that furniture production offers a fairly large selection of furniture, one of the most desirable for many cottage owners is a rocking chair. Settled in it you can relax and allow yourself to forget about everyday affairs for a while.

Moreover, in order to personal experience to feel all the benefits of having such a piece of furniture, it is not necessary to spend big money on buying a rocking chair. You can always make it yourself. Given that you can use available materials and tools, any person who at least once held a hammer and saw in his hands can cope with this task. There are many ready-made schemes for the manufacture of such furniture, therefore, if you strictly follow the technology of manufacturing a rocking chair, you can create a fairly elegant and reliable product that can serve you for many years.

A do-it-yourself rocking chair made by many craftsmen will cost less than a store product. Self-made furniture will be better and more environmentally friendly, you can think over your design and design concept. The rocking chair will be a good addition to the interior design of the room, a device that will calm you down, give you the mood to work, and relax. Such a product will become indispensable when rocking a child. For the baby himself, such a chair is a real swing.

If a person is not related to carpentry, then a natural question arises: how to make a rocking chair with your own hands? Initially, it is worth deciding on the type of rocking chair, there are several of them. There are types according to the design features:

Rocking chair, which has radius skids. This model is classic and most popular. It has low landing, since on rounded "radii" it is very difficult to keep balance when swinging.

Armchair with runners of variable curvature. In this case, the "radii" do not represent part of the roundness, which means that the wobble can have a large amplitude. In this case, the use will be safer and more comfortable.

Armchair nirvana. There are two subtypes: elliptical and spring. The former is considered unsafe, as tipping over often occurs, but the swing is soft and smooth. Spring models are more adapted to widespread use, but making a rocking chair with your own hands for such an upgrade requires skills and experience.

Rocking chairs 3 in 1. All three modes are presented here: chair, rocking chair, sunbed. Depending on the degree of reclining on the back of the structure, the position of the body is determined. Multifunctional furniture but oversized.

The presented design options can be made from almost any material: wood, metal, wicker, rattan. The seat can be hard, soft or a combination. Materials can be combined, and in some models even necessary. Thanks to the photo on the Internet, you can choose your favorite model of the product.

braided pattern

It is quite difficult to make furniture from a wicker or rattan with your own hands. Rattan is an expensive material, but a product made from it has a long service life, and the body is more resistant to mechanical stress. The same cannot be said about the vine, but it is more accessible and malleable in work.

To create original wicker furniture, you can view the master class. Such instructions will be quite enough to implement the project. First, the material is prepared:

1. Rattan cannot be assembled on your own - it is a tough liana that grows in certain areas of America. The vine is harvested independently: the branches are harvested throughout the year. Length and thickness may vary. When the vine is harvested, it is placed vertically outside to dry.

2. Processing of rods consists in stripping. The branches are placed in a bath with warm water where the material should spend about 12 hours. The branches will become elastic. When each twig begins to bend well, then you can remove the bark from them.

3. To continue working, you need to give each element the appropriate form. Thick branches are fixed in clamps in the appropriate position, and thin branches are divided into several parts, which are called taverns, with the help of a splitter.

4. Each shank must be passed through a press so that they become flat and fit for weaving.

5. The prepared vine is placed in a dryer for three days, where the shape of each element of the future product is fixed. Only from such a vine can a rocking chair be made.

The next step will be the production itself:

1. First, a frame is made from thick branches or wooden planks. The sizes are determined independently. All parts are fixed with nails or wire. The item is placed in the dryer for several days.

Frame is being made

2. The braid consists in pasting the back and seat with tatters. Furniture glue is applied to the body, which will serve as an additional connection. The taverns themselves braid the bars of the crate in a checkerboard pattern.

Weave the back and seat

3. When the body is ready, the skids are attached and the product is tested. The chair needs to be slightly rocked, if this process proceeds easily, and it does not tip over during swinging, then the center of gravity is determined correctly.

4. The last step is to open the vines with furniture varnish.

The made rocking chair can be used in the country house, veranda, balcony, garden, hallway. In addition to positive feelings during the use of this piece of furniture, this element will become a wonderful authentic design.

On video: making a fully wicker rocking chair

Wooden rocking chair

Making a rocking chair with your own hands from wood is quite simple, the main thing is to make the appropriate preparation. If such work is done for the first time, then a master class will help in this. . First, prepare the tools:

wood saws, jigsaw;
grinder or sandpaper;
screwdriver;
set of drills;
measuring tape;
a hammer;
putty knife;
level;
construction angle;
brushes, pencil.

Material preparation is also important. The wooden rocking chair is made partly from plywood. The remaining wooden parts are best selected from an elastic material. It's great if it's flannel.

After collecting the tools and material, you can get to work. Initially, a drawing of a rocking chair is made, performed in accordance with the parameters of the future product. The diagram is an exact copy, but on a reduced scale:

1. From plywood with your own hands, you need to cut out the side elements, which are semicircular bases with grooves for flannels. A jigsaw, wood saws and a grinder will come in handy here.

Making sidewalls

2. Flannels are being prepared, you can make them from plywood with your own hands, but on condition that the plywood is at least 30 millimeters thick and flexible in nature.

We make flannels

3. The plywood side parts are interconnected using 30x50x600 mm bars. Crossbars (flanels) are attached to the frame from above with a screwdriver at a distance of 2-3 cm from each other.

Assembling the structure

4. We attach flannels to the frame, for this we use a screwdriver.

We fasten the flannels to the frame

5. A plywood rocking chair is waiting for finishing. Places where there is an attachment of flannels to the sidewalls are covered with putty. When the putty dries, you can varnish the product on wood.

Finishing

A plywood rocking chair can be additionally equipped with other elements. For example, you can make the seat soft. For this on wooden base a foam base is laid, on top of which the fabric is laid.

On video: how to make a rocking chair out of wood.

Metal armchair

There is another class of product - these are metal rocking chairs. Not every master will be able to make such a design, since this requires more serious equipment and skill. Although, it is worth trying to make a rocking chair out of metal with your own hands. This can be done by focusing on the pictures, or by viewing the master class.

For work we need the following components:

steel bars;
galvanization;
steel corners;
apparatus for welding;
drill with special drills;
Bulgarian.

Often arcs for skids are made of profile pipe, and corners are cut out from the profile itself, which will serve as fasteners. From profiled sheet metal everything can be made necessary elements to create a structure like this:

1. First, drawings are made according to product design. To do this, you can take a finished chair and transfer this sketch, but besides this, think about how to attach the rounded skids.

2. Steel bars are cut to a length of 1 meter. After that, the frame is welded, to which the rods will be welded. The distance between them is about 1 centimeter. The metal is twisted into an oval.

3. After that, the master must attach the seat to the oval base. The seat itself is made of galvanized steel. Fastening is carried out using bolts, and the holes for them are made using a drill.

4. The final step will be painting and sanding sharp parts.

If we compare the operating conditions of wicker, metal and wooden furniture, then the most universal option is woven. It does not damage the floor surface, is easy to move, can be used in any room and on the street.

You can decorate such an element of furniture with textiles, in particular decorative pillows, quilted bedspreads, warm blankets. Thus, a note of comfort and coziness is introduced into the overall idea.

O beneficial effect rest in a rocking chair written a lot. It also helps to concentrate during intellectual work. Finally, it's just convenient, pumping out, to take books from the rack behind your back or a cup of coffee with coffee table. The prices of ready-made rocking chairs, as it should be in a consumer society, respond to such advantages in their own adequate way: a rocking chair for 5,000 rubles. it's still cheap. And the people are artisans and also respond adequately in their own way: those who want to make a rocking chair with their own hands are arriving. However, the rocking chair differs from other pieces of furniture, firstly, in that the whole thing moves and sways. Secondly, so that it does not turn from a rocking chair into a kicker or a tipper, the entire product with the person seated in it must have an exact balance, which must be maintained within acceptable limits for riders. different weight and builds. This publication is devoted to the consideration of questions on how to achieve the required qualities of a rocking chair.

Types of rocking chairs

It is necessary to be consistent with your own requests already at the stage of choosing a prototype. There are several types of rocking chairs, oriented to users with different habits and needs. The main types of rocking chairs are shown in the photo. Rocking chairs on simple radius skids (arcs, rocker arms, skis) were the first to appear in everyday life. They are in use to this day, both in modern and classical form, pos. 1 and 2. Their main advantage is constructive and technological simplicity.

Smoothness and softness of swinging are provided by radius skids only at relatively small swinging, and in case of strong swinging they do not guarantee against tipping over. Therefore, rocking chairs "on the radii" are made with a low landing, which ensures a large excess of the center of the generatrix of the circle (CO) over the common center of gravity (CG); see below for more details on the kinematics of rocking chairs. If a seat of normal height is required, then the skids are equipped with chippers, pos. 3. The shocks of the fenders on the floor are noticeably given off at the "fifth point", and in any case, you have to get out of the rocking chair on the radius skids, somewhat strained.

Note: stability during swinging with a slightly larger amplitude at a normal landing height is provided by rocking chairs on radial skids with a closing horizontal arc, see fig. on right. But, suddenly the limit is reached, the supporting surface is instantly reduced to a point and a sharp push in the back follows.

Overturning is excluded in rocking chairs on skids of variable curvature, pos. 4. All of them are quite comfortable for riders of different builds. They themselves gently land the seated and leaning forward rider of a rocking chair of the nirvana type on runners of variable curvature, pos. 5 and 6. It is also possible, by changing the progression indicator in the law of change of the generating radius (also see about kinematics), to design them for any, within acceptable limits, landing height.

Note: mothers with a baby give good rest with the complete unity of the souls of the rocking cradle. Reliable rocking chairs with a cradle are made only on skids of variable curvature, see fig. on right. Otherwise, suddenly the little one will get worried and the mother will start up, and you can somersault together. Which is just dangerous for a baby.

Nirvana rocking chairs on elliptical skids, pos. 7, provide a truly blissful slight rocking, but do not prevent tipping over during strong swinging, therefore they are equipped with bumpers; the front is often combined with a footrest. Garden rocking chairs with an awning on ellipses never tip over, pos. eight.

Nirvana rocking chairs on springs, see fig. on the left, swing as gently as on ellipses, because mechanical characteristic progressive spring. But it is difficult to make a spring chair with your own hands: either high-quality boards of special types of wood (teak, boxwood, dogwood) or rubberized so as not to scratch the floor, a strip of spring steel are required. In addition, dirt accumulates in the gap between the spring and the skid and it can be very painful to pinch your finger in it. For the last reasons, now spring chairs are very rare for sale.

Rocking chair 3 in 1

Finally, there are also multifunctional rocking chairs "3 in 1" on skids with smooth kinks, see fig. on right. In a direct landing, this regular chair; leaning back, it can be switched to rocking mode at a radius, and leaning back even more, it can be turned into a sunbed. But the dimensions of the 3 in 1 rocking chair are too big for apartments below the business class, and the transitions from mode to mode are accompanied by quite sensitive shocks. In unsuccessful models, for this you have to either get up at all, or twitch, wriggle and fidget like a puppet on strings. Therefore, rocking chairs 3 in 1 are a piece of furniture for an amateur.

To start

Without any special claims, just to relax after work, a rocking chair on radius skids will help. Blueprints simple sample, made, with the exception of skids, only from straight-line parts, are given in fig. To the cottage, veranda or garden, this chair can be made in half a day, using only a jigsaw, a drill and a couple wrenches(assembly - on bolts). And having swayed to your heart’s content, it’s possible to already think about home rocking chair for the more sophisticated; then you need a tool and knowledge more thoroughly.

How does it swing?

Most home crafters make rocking chairs according to ready-made drawings, but prototypes often turn out to be designed and tailored to a specific person and an exact replica is not so convenient. Therefore, before making a rocking chair, it is necessary to obtain at least initial information about its kinematics.

The CG of an upright person of normal build is located on the border of the lower back and sacrum with inside spinal column. In a seated individual, it is somewhat mixed forward and even less down. In the seat-rider system, the overall CG is shifted back almost to the starting position and a little further down. The downward displacement of the general CG for the design of a rocking chair is not particularly significant, and it can be assumed that the projection of the general CG on the supporting surface (floor) is approximately the same as that of a standing person. In the future, the resulting error can be easily compensated by the final balancing of the chair, see below.

The location of the central heating element vertically relative to the central heating unit has a much stronger effect on the stability and comfort of the rocking chair; the latter is the determining value in the design of rocking chairs on skids with variable curvature. If the CG and the CG coincide, this is an indifferent equilibrium: for any physically possible inclination of the chair, the projection of the CG on the floor falls on the point of contact of the skids O, pos. 1 and 1a in Figs. The chair does not rock, and if you lean back too much - an instant somersault with the risk of breaking your neck. Fortunately, the exact coincidence of DH and DH is possible only theoretically.

If the CG is higher than the CG, then its projection “runs away” outward, backward or forward, from the point of contact with any inclination. At the slightest inclination, the overturning moment Mo occurs (pos. 2 and 2a), the rocker turns out to be unstable. To avoid such a situation for a family rocking chair, it is calculated and balanced for the tallest, heaviest and pot-bellied rider possible so that its CO is 450 mm or more higher than the CO. Then, when the chair is tilted, t. O will “run away” from the CG projection, the restoring moment Mv will constantly act (pos. 3 and 3a) and the chair will not tip over when swinging within acceptable limits. For those who are smaller, the excess of the CO over the CO will turn out to be too big, and the rocking will be harsh, but this can be easily compensated with pillows under the back and buttocks. In general, the lower the elevation of the CO above the CO, the softer and smoother the rocking, but the probability of tipping over, sharply straightening up and sitting up in the chair, is higher. Therefore, it is better for novice carpenters to ask for an excess of CO in the range of 600-700 mm.

Note: if it is impossible to determine the position of the CG of the largest of the riders (say, in its absence), the radius of the generatrix of the circle R is taken equal to the average height of the users minus 5 cm.

There is no need to drag your own pillows with you into a chair on runners of variable curvature: it will itself rise to the position of greatest comfort. At the same time, the healthy man will lean back more, and the slender one will be sitting straighter. When swinging back, t. O will run away from the CG projection the farther, the greater the angle of inclination, and it simply will not work to swing before tipping over. And if you “pump” forward, which is generally difficult, the chair will smoothly land the hyperactive person on the floor: where do you want to rest? Get up, do something.

To construct a profile of skids of variable curvature, the radius of the generatrix of the circle (it is determined as in the previous case) will, firstly, have to be rotated several times by a fixed angle α; usually take α = 10 degrees. Secondly, to build the rear branch of the snake, R is increased at each turn according to the law geometric progression with index k=1.02-1.03. That is, it will be (see pos. 4 of the figure) R1 = kR; R2 = kR1; R3 = kR2; R4 = kR3 etc. if required. In fact, R changes according to some trigonometric function, but for furniture accuracy and the size of the rocking chair it is more convenient to replace it with a progression, it is easier to count.

The construction of the anterior branch is carried out at a constant R, but with each turn of the generatrix of the circle, the CO is raised vertically (ibid., at pos. 4 of the figure). The initial elevation Δh1 is taken equal to 2-3% R, i.e. (0.02-0.03)R, and the subsequent ones also follow a geometric progression with the same indicator as for the back branch. Δh1 in this case, the value is quite critical; its smaller value should be taken for thin ones, and the larger one for thick ones.

In conclusion, the obtained points are connected using a smooth curve pattern. Do not be embarrassed if the tangents to it turn out to be not perpendicular to the radii: in order for the chair to be stable, it must be on a reverse slope at every moment of rocking. When building, it is desirable to take a scale no smaller than 1:5.

Note: if a nirvana chair is being designed, but the front ascending branch of its runners will be an ellipse arc (green dotted line in pos. 4), tangent to the constructed profile of the runner in point I in the same place.

Final balancing

It is unlikely that a novice master will have a rocking chair immediately comfortable enough. Most likely, the product will need to be balanced. If the chair does not sway well, and shoves when leaving it, you need to weight the rear overhang. The easiest way to do this is to connect the ends of the rear branches of the skids with a low U-shaped beam of boards, with a notch facing down. Loads are placed in the recess. The arm of the lever in this case is long, so the weights do not have to be suspended. Another option, depending on the design, is a transverse tube-beam with a load inside. But in the process of balancing it will have to be removed and put back several times. If the rocking chair strives to fall back, you need to weight the front overhang. The easiest way to do this is by placing a footboard and attaching weights to its underside.

About materials

Rocking chairs are made mainly of wood. Metal, for all its manufacturability, low waste and greater resistance to outdoors, too heavy. The influence of the chair on the overall CG is significant, the moment of inertia of the system is large and, as a result, the swaying is too sharp. Or you have to set an extremely small initial elevation of the DH above the DH, risking that the rocking chair will tip over under someone. However, we will return to metal rocking chairs in the course of considering individual samples.

Plywood is a completely different matter, especially for beginner carpenters. Firstly, when making the parts of the rocking chair with 3-layer glued ones, it is possible only with the help of an electric jigsaw to make accurate and durable tenon-groove joints, on the left in the figure, if you follow the following. regulations:

Plywood of the middle layer is taken twice as thick as for the extreme ones. For example, if you need a total thickness of 20 mm, then glue 5-10-5 mm.
Assemble parts from blanks on a 2-component waterproof adhesive. If on PVA - be sure to reinforce with small nails.
The joints are assembled with gluing (wedging in this case is unacceptable) and reinforced with diagonal pairs of self-tapping screws from 2 sides.
The supporting surfaces are protected with overlays made of thin (6-10 mm) slats of hard durable wood or dense sheet rubber 4-5 mm thick. Plywood under concentrated load splits very well from the end.

Secondly, plywood makes it possible to apply non-standard technical solutions, for example. as on the right in Fig. Such a plywood rocking bowl can be made using, again, only a jigsaw. Convenience is high, stability is absolute, and can serve hanging hammock chair or swing chair. The thickness of the lamella boards is from 12 mm; connecting half washers on the poles - from 24 mm.

Note: in any case, the finished plywood rocking chair must be impregnated twice with a water-polymer emulsion or liquid acrylic varnish on the water based. This will not only increase the strength of the product and its resistance to external influences, but also remove excess residual stresses in joints and bent parts.

How to put overlays

Wear-resistant wooden pads on the runners of the rocking chair are installed next. way:

We turn the chair upside down;
Thoroughly warm the bar-blank with a building hair dryer;
We lay the workpiece on the skid and tightly wrap it along the entire length with cotton tape. Don't burn yourself, the wood is very hot!
We also grab the second blank on another runner;
After the strips have completely cooled down, we remove the bandages from the braid and glue the PVA overlays on wood or with 2-component glue;
We attach the ends of the slats with small nails until the overlays fit snugly along the entire length. We put washers or pieces of plywood under the nail heads;
After the glue has completely dried (2-3 days), we remove the temporary fasteners. We drill blind holes for self-tapping screws and fasten the ends completely;
We rub holes with fastener heads with putty from sawdust of the same tree, densely mixed with PVA.

Note: metal hardware linings need to be fixed only at the ends. Otherwise, when the lining is abraded during use, the fastener heads will stick out and begin to scratch the floor.

Examples of rocking chairs

metal

Let's start the review of rocking chairs with metal ones, because. making rocking chairs out of it is justified in a few cases. Forged rocking chairs imitating classic wicker or rattan wicker, both requiring special equipment, a forge, etc. qualifications, do not touch. But a metal rocking chair "under the braid" can be made by welding from a profile pipe; preferably - elliptical section. In this case, it is necessary to choose the kinematic scheme of the nirvana rocking chair as the least sensitive to the excessive elevation of the CO above the CO, it also corresponds well to the design of the wicker rockers, see fig. The seat, in order not to increase the moment of inertia, is made of braided cables, belts, etc.

It also makes sense to make garden rocking chairs out of metal, see below, due to its strength and wear resistance. But a welded frame like the one in pos. 1 fig. on the right - the solution is not optimal, too complicated, labor- and material-intensive. It is much easier to make a steel frame of a garden rocking chair of the Concept type, pos. 2. Pipe - round from 40x2. Actually the bed can be sewn like a hammock; balancing - by changing its tension and, accordingly, sagging. As a result, labor and costs are much less than for repeating the established forms of rocking chairs coming “from the tree”, and comfort is no worse.

Another interesting option is visible here: the frame of a rocking chair A concept from ... gymnastic hoops. Only not aluminum or propylene, but carbon fiber (carbon). Strength - monstrous, durability - absolute, weight - miserable. What, however, can not be said about the cost.

Vanka-vstanka

AT recent times gained popularity garden rocking chairs- tumblers. If you lean back completely in this and tuck your legs in, it collapses back at almost 90 degrees without losing stability; the rider will be lying on his back with his knees at the zenith. And if you stretch your legs forward, the rocking chair - roly-poly-stand-up becomes in the usual position and then you can sway as always.

The roly-poly toy with a spherical bottom sways quite sharply. Comfortable swinging of the roly-poly rocking chair is achieved by profiling its runners according to a complex law. It will not work to build their sidewalls “in a school way”, as described above. It is necessary to be guided by proven samples and draw markup on a grid, see fig. The variant on the inset, with a sheathing of planks 30-40 mm thick, is more expensive, but less laborious. It also allows you to increase the length of the rocking chair by placing intermediate skids.

Note: wooden balls are mounted on the protruding ends of the longer rods (1050 mm) and form handles for swinging and carrying.

rocking bench

Rolling with your heels in the sky, throwing your hands behind your head and admiring the clouds floating in the blue heights through the trembling foliage is a heavenly pleasure, but not for everyone. It is desirable for someone to look more impressive while relaxing. This is more suitable garden bench- rocking chair, see fig. It is a bit difficult to swing on it, its own moment of inertia is large, but it also swings for a long time. The maximum span between supports with skids is 750 mm with 40 mm thick lathing. The back paneling is decorative.

Sunbed with awning

Both those and other requests will be satisfied by a garden rocking chair on elliptical runners and with an awning. The dimensions of its sidewalls are given in fig. their material is 24 mm plywood. The bed width is up to 900 mm, its sheathing is made of slats 50x50. The places of the sidewalls, indicated by gray circles, are connected by round wooden crossbars with a diameter of 60 mm or more.

rocking chair

Here we are not talking about rocking horses, they are toys, not furniture. But it’s also not harmful for children to relax, swaying, so it makes sense to make a rocking chair for a child. Its proportions will be slightly different than for adults, due to the influence of the square-cube law.

The device of a child rocking chair, its assembly diagram and specification of parts are given in fig; material is wood. Somewhat experienced home master to build a rocking chair for a child, guided by these data, will not be great work, and beginners can first watch a master class on making almost the same children's rocking chair.

Everyone associates a rocking chair with comfort and coziness, and you immediately want to sit in it by the fireplace in country house with a cup of hot coffee. It is very beautiful and original item an interior that fits into almost any style. In addition, swinging on a chair is good for health. So you can relax, relieve stress, gain strength, calmly read your favorite book, listen to music or just take a nap. You can make a rocking chair with your own hands from wood, consider examples with photos, drawings and the progress of work using several technologies.

Features of wood structures

Most often, furniture is made of wood, so the rocking chair is no exception. Why do many people choose this particular material:

What makes this chair attractive?

How to make a rocking chair with your own hands from wood according to the drawings is shown in the video with instructions and work progress.

Types of armchairs

There are many various models chairs, all of them can differ in their functionality, dimensions, style of execution, materials and the presence of additional gadgets. We always choose furniture based on our preferences and habits, and the rocking chair is no exception.

Consider several options for the design of rocking chairs:

Work technology

To figure out how to make a rocking chair with your own hands from wood according to the drawings and the right sizes, you need to purchase everything necessary materials and tools:

Screwdriver.
Paint brush for filling fastener holes.
A hammer.
Straight corner with a ruler.
Disc grinding machine.
Self-tapping screws.
Electric jigsaw for cutting blanks.
Clamp.

1 way

To create a rocking chair, you can use an ordinary chair by shortening its legs and attaching this structure to the skids. To appearance was attractive, the chair can be braided with leather or plastic ribbons. If desired, you can also sew a rocking chair cover yourself.

To make the design more interesting shape, sidewalls can be cut out of plywood according to a pre-calculated pattern. The edges of the plywood should be well finished.

plywood edges

Then we connect the two resulting parts to each other using three bars (30 * 50 * 600 mm).

To lay out upper part, we use thin boards and plywood planks (10 * 50 * 600 mm).

In some cases, the length can be increased so that the slats protrude beyond the edges of the sidewalls. After assembling the chair, it can be varnished or painted.

2 way

We begin the process of creating a rocking chair with a drawing. For a quality result, a sketch is required. In addition, we can save ourselves from strong errors in the calculation of the amount of material.

Work technique:

3 way

We will assemble a rocking chair according to the drawing, using high-quality types of wood. As a basis, we use the usual wooden chair. All parts will be mounted at right angles, so you do not need to cut out many additional elements.

Now you can create a rocking chair yourself and please your household. The main thing to remember is that the product can be scratched, and the material will quickly age and lose its appearance. Therefore, always treat the chair with varnish so that it pleases you with its beauty for a long time and creates comfort in the house.

Life and surrounding events fly at a rapid speed. Often we do not have time to look back, as the week has already ended, the weekend has flown by, and it is time to start the race again. How often do we dream of cozy place where you can retire and dream about the eternal? Or maybe you just need to sleep and read your favorite book, covered with a warm blanket, while feeling the sway like on a swing or a hammock?

The rocking chair is an original and beautiful part of the home interior.

An ideal option for this is a rocking chair. It will be a great addition in the garden or on the porch of the house, where you can bask in the warm rays of the sun and listen to the birds singing. Also, the chair can fit perfectly into the urban interior of the apartment - you can relax on it after working days and do what you love: knitting, reading, watching movies.

If a child has appeared in your house, any mother will dream of a place where she can easily rock the baby and relax on her own. Such rocking chairs in stores are not cheap, moreover, it is not always possible to find furniture that is ideally suited to the interior of the room.

Rocking chair - perfect way create an atmosphere of comfort and tranquility.

An excellent option would be to make such a chair with your own hands. The advantages in this case are undeniable: you can choose right size, design, material and feel a great sense of pride for being able to create such beauty with your own hands.

Unconditional plus homemade rocking chair- its correspondence to your tastes.

If you decide to make a rocking chair with your own hands, you must first consider the types and designs of products, familiarize yourself with various materials, of which such a process as making a chair will bring pleasure, and the features of working with these materials.

A simple wicker rocking chair will add a lot of comfort to your home.

Consider the main types of products:

Classic rocking chairs on regular skids- harmonize both in the modern style and in the classics. Manufacturing technology does not require huge experience in furniture production, but the basics of practice should be present. The runners sway smoothly with a small radius, with a strong buildup there is a risk of tipping over.

These chairs are made with a low seat for a more stable position.

Rocking chairs on skids with chippers. If a classic chair needs to be made with an average (normal) seating height, it is recommended to equip the arches with chippers - the runners are designed so that the ends are curved in the opposite direction.

In this version, the arches prevent from rolling over, but getting up from the chair is uncomfortable and hard due to the presence of these bumpers.

Rocking chairs with elliptical arcs - chairs guarantee soft gentle rocking, but with a large buildup there is a risk of tipping over, because of this it is recommended to equip them with bumpers, as in the previous version. For garden plots the variant of elliptical rocking chairs with an awning is offered, with it capsizing is excluded.

The rocking chair can be small and neat.

Multifunctional 3 in 1 rocking chairs - when landing, it looks like standard chair for even sitting, while leaning back, the skids go into rocking mode, with further recline, the chair turns into a sunbed.

However, visually, such a chair looks bulky and the process of transition from one function to another is inconvenient, sharp jerks of the body are necessary.

Having considered the main options for chairs, in the absence of furniture production experience, we recommend that you take a closer look at the classic version, making a rocking chair is not as difficult as it might seem.

Having decided on the model, it is important to make a decision on the materials.

Materials for rocking chairs

There are many materials from which a chair can be made. There is popular models, most commonly used in the manufacture of rocking chairs.

Consider everything possible options and dwell on the most popular in more detail.

Willow vine is an easy-to-manufacture material, looks beautiful on the finished product, the main drawback is moisture intolerance, i.e. Outdoor installation is not recommended.
Rattan - a vine originally from South-East Asia, in beauty they are not inferior to willow materials, but not durable. When working with rattan, glue and special knitting are used - nails and screws cannot be used.
Forged metal is a durable and strong material, Forged Products decorated with a variety of metal patterns. Exclusively street version rocking chairs.
Soft (leather) details - there are plywood rocking chairs covered with other material, for example, leather - they can be attributed to strict office options;

Some chairs can be easily transformed.

So, the most popular materials are rattan and willow. Let's try to understand their properties.

Rattan is a vine from the palm family, growing in a humid region, its structure is porous and moisture resistant. Rattan is not afraid of rain and furniture from it is often installed in garden plots and courtyards. Furniture made from this material is eco-friendly, beautiful and comfortable. However, due to porosity, the material can quickly fail, and the repair of such furniture will cost half the cost of the product.

Its wood is very flexible and works well.

Willow is a tree known to all of us, the structure is homogeneous, respectively, such material is less flexible in comparison with rattan. It is also not recommended to leave the willow chair in the rain, as the structure of the wood can swell and deteriorate. In rattan, the porous structure does not allow using anything other than glue, so you have to fix the whips with special knots. It is also worth noting that willow material will come out much cheaper than rattan.

When making furniture from willow, craftsmen use self-tapping screws and special glue.

Now, knowing the main indicators different breeds wood, you can decide for yourself which of the materials is closer to you and is right for you.

A variety of materials allows you to create a large number of excellent copies.

Making a rocking chair with your own hands, especially if this is your first such work, is easiest from plywood. As a first experiment, we recommend using maple plywood, as it is a very hard material with a high density and a beautiful texture - pattern.

With this type of material, the manufacture of the chair will bring you a pleasure.

Consider the features of working with plywood. For structural strength, three layers of plywood are used, and the middle one should be twice as thick as the outer ones, for example, if we need a total thickness of 20 mm, then we glue 5-10-5 mm, we need to glue it with special waterproof glue and can be additionally strengthened with small nails.

When connecting parts, you can use self-tapping screws in addition to glue.

Also the structure of plywood allows you to develop unusual shapes. It is enough to draw the desired blank and cut it with a jigsaw. Also, when working with plywood, it is important to take into account that it must be impregnated with a water-polymer emulsion and varnish at least twice.

Such a product will be much stronger and more resistant to external influences.

Below we offer step by step instructions. how to make a rocking chair with your own hands . Consider 2 options for chairs, for both we will use plywood as the main material. Before starting production, it is important to decide on the necessary equipment so that your work does not stop in the middle of the cycle due to the lack of any materials or tools. So, you will need:

Templates for frame parts;
Plywood boards and bars;
Jigsaw;
Reed threads;
Grinder;
Screws, small nails, self-tapping screws;
Sandpaper;
Drill - for drilling side holes;
Water-repellent impregnations, varnishes.

Tools for creating a rocking chair with your own hands.

The process of making a rocking chair

Rocking chair made by hand in classical style with curved skids, will become great option for the first furniture making experience. Woven cane elements will also be used, which will create beautiful patterns and seating comfort.

A rocking chair can easily be made at home.

So, we need 3-ply maple plywood, on which we will impose pre-created templates, and make the frame of the product. You can create a drawing of a rocking chair yourself or search on the Internet ready-made options forms.

We cut out all the elements with a jigsaw and a grinder.

It is very important to carefully finish the surface of all wooden elements, they must turn out smooth, without burrs and rough areas, therefore, in order for the templates to accept required view they also need to be cleaned with sandpaper.

We connect the parts with screws.

Do not forget that the back and seat of our chair will be decorated with cane patterns, so we leave their central part empty. That is, we create only a frame from plywood. Along the entire perimeter of the resulting frame, we make small identical holes at a distance of 1.5-2 cm from each other.

In the holes in the future we will fix the reed threads.

After our base is ready, we start working with the reed. We weave it with threads vertically and horizontally over the entire surface of the seat according to the type of weaving and fasten it with strong knots in the holes drilled earlier.

We perform similar actions with the back of the product.

When the product is formed, all wooden elements need to be processed protective coating at least 2 times.

After drying, fix with a double layer of varnish.

Consider another simple version of the original plywood rocking chair. The armchair consists of two sidewalls in the form of a boomerang and transverse guides from wall to wall in the amount of 14 pieces.

The chair is made of plywood 15 mm thick.

To begin with, according to the template, we will draw 2 sidewalls of the chair and carefully cut them out according to the markings with an electric jigsaw. All edges of the sidewall must be sanded with sandpaper.

You should get 2 large "boomerangs".

We glue the supports to the walls of the sidewalls with carpentry glue and, for reliability, we fix each of the bars with a self-tapping screw.

We also attach our guides to these supports with self-tapping screws.

After completing all the above steps, we will have the frame of our rocking chair ready. We treat the sides of the chair with stain in two layers, you can proceed to the second layer only after the first has completely dried.

The ends of the sidewalls can then be varnished or painted with glossy paint.

Our chair is ready.

It remains to decorate it. For this we take soft pillows of the required color or a small flexible mattress and fasten it to the frame with the help of ties. soft elements You can either buy it in the store or make it yourself. To do this, it is better to take natural fabric as upholstery and foam rubber 5 cm thick.

We cut out the part we need in size from the foam rubber and put a pre-sewn cover on it.

We are sure that making one rocking chair with your own hands will push you to conquer new heights, and you will want to make a similar or another rocking chair with your own hands for all family members so that you can get together on quiet cozy evenings and talk about past events and plans for the future, slowly swaying on their own made chairs.

The rocking chair will help you quickly and fully relax.

You can make this kind of furniture individual sizes, including children's sizes for the youngest members of the family. Such evening or morning motion sickness creates a relaxing calming effect, which is so necessary for a person in modern world. Such chairs are environmentally friendly, as they are made of natural materials.

They are beautiful and will be able to decorate your interior in the apartment, on the balcony or in the courtyard of the house.

Most rocking chairs do not require special care, they easily tolerate cold temperatures. Some materials do not tolerate strong moisture, so you cannot leave such furniture outside for the winter.