Limescale can be cleaned in many ways, from baking soda and vinegar to professional all-purpose cleaners. However, it is important to consider what material the tray and cabin doors are made of, so as not to aggravate the situation and spoil the coating. Below we will answer the question of how to clean a shower stall at home from plaque and preserve the beauty and shine of modern materials.
Limescale deposits periodically appear on the shower stall, spoiling appearance. It consists of calcium and iron salts; when the water dries, the notorious plaque remains. Detergents, in turn, also form a cloudy film on the glass. At high humidity on metal surfaces Rust appears and the shower stall is colonized by fungus.
In order to get rid of these troubles, you need to properly care for your shower stall. Simple steps that even a child can handle will help avoid hours of scrubbing off plaque with powders and rags. Just ask the inhabitants of the house to rinse after they have taken a shower clean water soap all surfaces and wipe doors, tray and taps dry.
To prevent mold from appearing, open the stall and bathroom door (if the shower is not occupied) - this will ensure constant air circulation and reduce humidity.
Rules for cleaning shower stalls
Shower cubicle – perfect solution For small apartment, but it is more difficult to care for than a bathtub. All its parts are made of different materials, and you need to wash them by different means. The cabin frame is most often made of aluminum or chrome-plated steel. It is advisable to rub it until it shines.
The easiest way to clean glass showers is with enamel or ceramic tray, but plastic doors and acrylic baths require careful treatment and special means. If you choose the wrong detergent, the plastic can become cloudy forever, and become covered with a network of unsightly scratches from abrasives.
To clean the shower stall you will need:
- Silicone or rubber scrapers
- Soft sponges
- Microfiber or other soft cloths
- One of the tools we will discuss below
Advice: When working with chemicals, use rubber gloves.
Pallet
How to clean a shower stall limescale, in particular the pallet? Before choosing a product, you should decide what material it is made of. Most often, pallets are made of acrylic, earthenware, ceramic tiles, enameled steel or cast iron.
Cleaning the acrylic tray
The most capricious material is acrylic; it cannot be washed with hard brushes and cleaning powders. Acids, acetone or alcohol contained in the products can also damage the coating. Before purchasing, carefully read the composition of the product; you should also be wary of the presence of formic acid, alkali or formaldehyde.
Despite many precautions, acrylic is good and warm material. You can clean it with a regular sponge and laundry soap. Water deposits and sticky deposits of sebum can be easily washed off with a toothbrush and paste: you need to apply the paste to the dirty areas and leave for a few minutes, then wipe off with a damp sponge; any dishwashing liquid can handle greasy stains just as well as paste.
Modern industry offers wide range cream-like cleansers acrylic bathtubs. They are very simple to use: the cream is applied to the tray using soft fabric, let stand for 15 minutes and wash off running water. Well proven: " Star-Acrylat», « Sarma», « Amway», « Acryl-Net», « Cillit», « Akrilan», « Cif" In case of serious deposits, use silver polish, apply strictly according to the instructions.
Cleaning the enamel tray
Most often they are made of cast iron or steel and coated with enamel. Contains cleaning product enameled tray there should be no sulfuric or hydrochloric acid, formaldehyde or alkaline compounds.
Powders containing soda are ideal: “Komet”, “Pemolux” and others. You can use a mixture of soda and citric acid, dilute it with water to a paste, apply it to the enamel and rinse off after 10 minutes.
Folk recipe: take a bottle of ammonia, juice of one lemon, dilute a quarter glass of vinegar per 1.5 liters. warm water. Using a toothbrush, apply the solution to the tile joints, after 10 minutes scrub vigorously with the brush and rinse with water from the shower.
Doors
Doors and walls are made of durable glass, triplex or special plastic; depending on the material, care will vary.
Triplex and plastic
How to clean a shower stall from limescale if it is made of triplex or plastic? Study the composition of the product that the seller offers you; it should not contain active acids, alkalis, alcohol or formaldehyde. It can be an aerosol, liquid or paste, but avoid cleaning powders. Aerosols are very convenient; they are applied to plastic and literally immediately removed with a rubber scraper; if the contamination is severe, then you can leave the product to interact with the surface for the time specified in the instructions.
Glass
Washing glass doors is a pleasure; you can use almost any glass cleaner, traditional methods or universal aerosols for cleaning shower stalls.
- Specialist. means: " Nordland», « HG», « GLUTOCLEAN», « Sanelit», « Max Extra Clean», « Cif», « Mister Muscle"and many others.
- It doesn’t matter if you don’t have it at hand professional cleaner, in this case, you can use the same method that our grandmothers used to remove plaque. Take half a glass of vinegar or citric acid, add water to make a full glass. Apply this solution to the walls and doors of the shower stall and leave for 10-15 minutes. When the allotted time is up, rinse the glass a large number water, if necessary, rub with a soft cloth. After cleaning, do not forget to wipe the glass dry and polish it with a soft cloth.
Plumbing
Taps, shower heads, mixers, and most often the frame itself are made of chrome-plated steel. They are washed with metal care products and polished to a shine. The metal parts of the shower stall are wiped with a dry cloth after each use.
- It happens that the tap is so covered with salt that it stops opening, in this case you need to soak a rag in vinegar and wrap it around the tap, put it on top cling film so that evaporation does not occur. Vinegar will soften limescale and restore mobility; apply the product for 2-3 hours. Using vinegar, you can also clean chrome and nickel-plated parts of the shower stall, taps, hoses, and rubber gaskets.
- Another problem that often happens is that the holes in the hydromassage nozzle or shower get clogged. How to clean limescale from a shower head? We will need it " CilitBang"or heated vinegar, it must be applied directly to the shower sprayer and after 15-20 minutes. rinse with water. Now the most painstaking task begins: you need to unscrew the sprayer and carefully clean all the holes with a darning needle or toothpick.
How to destroy mold
If mold has settled in the shower stall, it’s time to use one of the industrial fungicides. Before using any product, read the composition and recommendations, whether it can be used for plastic and acrylic, exposure time, etc. Do not ignore the manufacturer's advice.
Our water is so hard, so we have to clean the kettle and plumbing fixtures quite often. Otherwise, they lose their appearance, and using them becomes problematic. Of course, in such a situation we already have our own proven methods that we successfully use. For example, I can tell you how to clean a shower head from limescale.
This element of plumbing receives special attention, since small holes become clogged very quickly. And it would be very expensive to buy a new sprayer every time.
To disassemble or not?
In order to properly clean the watering can, it is advisable to disassemble it, since it is otherwise impossible to see what is going on inside. The main pollution accumulates there. And that's not only calcareous deposits, but also small particles of sand and rust missed by the filter.
Unfortunately, not all models can be disassembled with your own hands and then reassembled without damaging the structure. Therefore, knowing about hard water, we always buy only collapsible ones.
The watering can is decomposed into its component parts as follows::
Image | Description |
![]() |
Step 1
Remove the plug in the center of the mesh by picking it up with a screwdriver or knife. |
![]() |
Step 2
Unscrew the screw located under the plug. |
![]() |
Step 3
Carefully remove the mesh, being careful not to tear the thin rubber gasket. |
![]() |
Step 4
Let's break everything down into its component parts and see something like this. |
If you have a watering can of a different design, the instructions that come with any plumbing fixture will help you disassemble it.
If the device is non-separable or you do not want to touch it before the warranty period expires, it is advisable to at least disconnect the watering can from the hose.
![](https://i1.wp.com/mirnadivane.ru/wp-content/uploads/2017/05/shlang-krepitsya-k-raspylitelyu-cherez-rezbovoe-so.jpg)
It is worth saying that with regular cleaning once every 2-3 months, there is no need to disassemble the device each time. This can be done once every six months to a year to remove accumulated insoluble debris from its insides and hose. Or when, after standard cleaning, water does not flow out of all the holes in the shower head.
Home cleaning methods
Let's move on to how to clean the shower head from limescale. Surely everyone knows that these deposits soften under the influence of acid. But use caustic chemical compounds It’s not at all necessary, you can do it with home remedies.
Method 1 - using vinegar
Vinegar - first and foremost effective remedy to combat water stone. To make it soft, just keep the device in the solution for several hours.
At the same time table vinegar There is no need to dilute it, but if you only have essence, then before you clean the shower head, you need to dilute it. To do this, add 6–8 parts of water to one part of the acid.
The cleaning method depends on the design of the nozzle:
- On a permanent watering can attached to the wall, put on a thick plastic bag filled with vinegar. Its neck is tightened around the leg of the atomizer and secured with an elastic band.
![](https://i1.wp.com/mirnadivane.ru/wp-content/uploads/2017/05/vot-tak-kak-na-foto-otmachivaetsya-nesemnyy-dushev.jpg)
- An unassembled nozzle disconnected from the hose The shower head is dipped into a container of acid.
![](https://i1.wp.com/mirnadivane.ru/wp-content/uploads/2017/05/nuzhno-chtoby-rastvor-pokryval-vse-zagryaznennye-m.jpg)
- Details after disassembly They are also placed in a container and filled with vinegar, having previously descaled them mechanically.
The holding time depends on the degree of contamination. I usually leave it overnight. And in the morning I rinse it under running water with a brush, removing the remains of the softened stone. I remove stuck particles from the holes with a toothpick.
If the process needs to be speeded up, the vinegar can be heated.
Method 2 - using citric acid
Citric acid is the second most popular and effective home remedy from scale. You will need one large pack of 25 grams.
The contents are poured into any container that is not afraid high temperature, about a liter is poured into it hot water.
Before cleaning the shower head, you can disconnect it from the hose or put it in a jar directly, placing the container in the bathtub or shower stall.
![](https://i1.wp.com/mirnadivane.ru/wp-content/uploads/2017/05/ochistka-s-pomoschyu-limonnoy-kisloty.jpg)
![](https://i0.wp.com/mirnadivane.ru/wp-content/uploads/2017/05/dlya-udaleniya-naleta-udobno-polzovatsya-staroy-zu.jpg)
Method 3 - using Antiscale
This product is not suitable for any model, because it only works effectively when boiled. And plastic parts can become deformed due to high temperatures.
The price of Antiscale is low and the shelf life is long, so you need to have it at home just in case. It will help get rid of old deposits, but the nozzle must first be disassembled.
![](https://i1.wp.com/mirnadivane.ru/wp-content/uploads/2017/05/podoydet-lyuboe-sredstvo-ot-nakipi-dlya-chaynikov.jpg)
The product is dissolved in water, brought to a boil, immersed in the solution metal parts and boil for 10–15 minutes.
Conclusion
Maintenance of plumbing fixtures should be regular, and then it will look and work like new - for a very long time. In the case of a shower stall, this is especially true - after just a few uses it loses its luster. But if we solve the problem of how to clean glass from plaque immediately after it loses its original appearance, then we pay attention to the watering can only when it starts to work poorly.
However, using the most common home remedies, this problem can be easily avoided. You now know how to do this, and the video in this article will help you visually evaluate the result. You can leave feedback on whether you managed to cope with the raid in the comments.
At first glance, cleaning a shower stall is not difficult. However, this matter has its own secrets. After all, the cabin is made of various materials, differing in their properties and care features. What and how to clean the shower stall in order to get rid of limescale, rust stains and soap stains, and at the same time spend as little effort and time as possible? Let's figure it out.
Choice of funds
The choice of product depends on what material you have to clean. For example, the walls and doors are made of plastic and glass, the shower tray can be made of acrylic or ceramic, and the shower head, handles and hinges are made of chrome-plated steel. In order to effectively clean each of these elements, you need to know the features of caring for them.
Whatever the cabin is made of, it should not be cleaned with abrasive products. Even the powder, not to mention metal brushes, can leave scratches on the surface. They may not be noticeable immediately after cleaning. However, regular cleaning with abrasive agents will hopelessly ruin the appearance of the cabin.
For mechanical means for high-quality cleaning, feel free to use a rubber or polyurethane scraper, a synthetic sponge and a soft cloth. When choosing a detergent, avoid formic acid, formaldehyde, gasoline and acetone. It is better to purchase a special spray for cleaning shower cabins. It does not need to be rubbed over the surface; it copes well even with severe dirt.
Do not use abrasive products to clean the shower stall.
Be careful, in some cab models, to apply the product to the interior surface. sliding doors they will have to be completely closed. In this case, there is no need to spray the spray in a confined space. It is better to apply it to a soft cloth and wipe the surface by hand.
Cabin washing
If the cabin is not very dirty, apply a soap solution to its surface and immediately rinse it with water or remove it with a scraper. For more serious stains, leave the solution for a quarter of an hour. A potent paste-like product will help deal with especially severe stains. Apply it with a soft sponge to the stains and leave for 30-35 minutes. Rinse thoroughly with water and wipe the cleaned surface dry.
To restore shine to chrome parts and door handles, spray them with glass cleaner and rub with a dry, soft cloth. To remove deposits from faucets, nozzles and shower heads, use a special limescale remover from time to time. Clean thoroughly clogged holes in the shower head with toothpicks.
Increased humidity inside the cabin can cause mold and mildew. Therefore, keep the doors slightly open at all times.
Alternative to chemistry
If you are not a supporter of household chemicals and prefer to use improvised means, then the following methods will help you:
- Mix 1 liter of water, 25 g of vinegar essence and 50 g ammonia. If desired, you can add a little soda to the resulting solution. Clean the tray, doors and cabin walls with this product. Then rinse and wipe dry.
- Metal parts and acrylic tray cleans well with toothpaste. Apply it for 10-15 minutes on the contaminated surface, then rinse with water.
- To prevent fungus and mold, treat the booth with a solution of 1 tbsp. water, 1 tsp. vinegar, 1 tsp. ammonia and 1 tsp. hydrogen peroxide.
- A vinegar solution of 10 parts water and 1 part vinegar works great for removing soap stains, limescale and rust.
- To clean glass, mirrors and taps, use a mixture of 1 tbsp. l. vodka and 2 tbsp. l. water. Soak a towel in the prepared solution, remove dirt and wipe dry with a clean rag.
- You can achieve shine on the cleaned surface using 20 g of soda and 30 g of citric acid. Mix these ingredients in 1 tbsp. warm water, stir well and treat the cleaned surface. Leave on for 10 minutes, then rinse with water.
Cleaning a shower stall is a simple process, but requires regularity. Removing toothpaste in a timely manner, wiping the surface dry after cleaning, and opening the doors slightly after each use will allow you to simplify your work as much as possible and reduce the time spent on cleaning.
The quality of water, as well as the use of various gels, shampoos and soaps for water procedures, affects the cleanliness of the shower stall. Soap stains, limescale and fungus spoil the appearance of the plumbing fixture.
Every housewife wants to keep the bath clean, so it is very important to know all the rules for washing and caring for plumbing fixtures. Today we will talk about how you can clean a shower stall and what needs to be done to ensure that it remains in its original form.
The shower stall consists of several parts made of different materials, so they use integrated approach. This takes into account the material of manufacture, as well as the presence of a hydromassage panel and other devices.
For cleaning use:
- a synthetic sponge or a special brush for washing;
- scraper with rubber coating for glass;
- microfiber cloth;
- cleaning products in the form of sprays, pastes and creams.
- sponge made of metal threads;
- sharp scraper;
- cleaning products with ammonia and acetone;
- abrasive powders.
With daily care General cleaning can be done once a month. Cleaning usually starts with walls and doors, then washes faucets, handles and hinges.
Actually last stage The tray is being cleaned. Some shower stalls have a base that is covered with a special screen - it is wiped last.
Faucets, watering cans, hoses and fixtures also require maintenance. They are washed to remove limescale, stains and rust; after washing, all surfaces are wiped and polished.Getting rid of limescale
Limescale stains on surfaces are formed due to low-quality hard water. To prevent their occurrence, it is best to use a filter with reverse osmosis. It traps salt particles and other impurities that cause plaque.
But not everyone can afford such a device. Therefore, you have to use various cleaning products. Paste-like substances will come to the aid of housewives, as well as cleaning compositions in the form of a cream or spray.
Shower cabins are usually equipped with acrylic pallets.
Which in their composition and production methods are no different from ordinary acrylic bathtubs.
In order to find out as much as possible full information about how to clean acrylic surfaces of booths from limescale deposits, yellow spots and rust- we recommend that you visit our.
Removing limescale stains is a complex process and requires a lot of effort. However It is not recommended to use brushes with hard bristles and chlorine-containing liquids. They can ruin the surface. Therefore, it is better to use gels or sprays that contain mild acids. For example Akrilan and CIF cream. They will be discussed below.
The principle of use for all household chemicals is the same. The product is applied to limescale stains, left for a while, and then wiped with a soft sponge and rinsed off. cold water. If traces remain as a result, the procedure is repeated again.
Particular attention should be paid to equipped ones. In addition to washing the surfaces of the booths, you also need to clean the scale and heating elements steam generator. This is done quite simply. Citric acid is poured into the tank and the system is turned on at maximum temperature. After 5 minutes of operation, you need to drain the water from the tank. The scale has been removed.How can you clean glass from soap stains?
Some booths are made entirely of glass, while others only have glass doors. In any case, soap stains - main enemy housewives. After all, after almost every shower, stains remain. How to remove plaque from the glass in the shower and what to clean the doors with?
Special sprays are used to clean glass surfaces. They are applied to the glass and then removed using a rubberized scraper, which allows you to remove stains that are inevitable when using a rag.
Examples of such compositions include: Tytan, Mellerud and other specialized substances.
To prevent the appearance of soap film, special water-repellent substances are used. They will be discussed below.What chemical is better to wash?
Chemicals for cleaning bathtubs and showers are selected based on the type of contamination and the quality of the material from which the plumbing fixtures are made. When cleaning glass doors and walls, it is better not to use powder cleaning agents; they damage the surface and leave scratches.
"Akrilan"– has a rather pungent odor, but has an antibacterial effect, suitable for acrylic and plastic pallets.
The product is used to combat soap film, grease, rust, fungus and salt deposits. Does not leave streaks or scratches. Acrylan is applied to the fabric or directly to the surface, rubbed in and left for a while. Then rinse with water and wipe the booth dry.
"Cif"– is available in the form of a soft cream without abrasive particles in the composition. Does not harm acrylic, enamel and metal coatings.
Removes lime, rust, soap scum and others stubborn stains. Available in the form of a spray and cream, and also has several options with various flavored fragrances.
"Cillit Bang"– the product is presented in in various forms: foam, liquid and spray. For each type of pollution, a separate composition is presented: “anti-grease”, “anti-lime”, “black mold” and “soap stains”.
The detergent is applied to the surface, left to interact more effectively with the dirt, and then washed off. Also suitable for cleaning glass doors, chrome faucets and handles.
Amway- a good detergent for cleaning surfaces from limescale. Its peculiarity is its absolutely harmless composition. The substance does not need to be washed off at all.
It is simply applied to problem areas and left for long time. Can be used daily as a composition for the prevention of pollution.
Spray Anti-raid— a product for cleaning acrylic bathtubs and showers. Received recognition from users due to its ease of use. As the name suggests, its main purpose is to clean surfaces from limescale.
Thanks to its acidic composition, it quickly decomposes dirt. At the same time, it is quite gentle on the coating, which cannot be said about the skin of your hands. Therefore, it should only be used with rubber gloves.
How to clean with folk remedies?
Along with chemicals, folk recipes are used for cleaning. They most often contain ingredients that can be found in every home. At the same time, methods of washing surfaces are no less effective than using household chemicals. What and how to wash cabins from limescale at home?
The shower stall is a place of high humidity, and sealant in the corners is an excellent environment for the development of fungus. It is the cause of many diseases, so it is very important to eliminate it in time.
In our special article we will tell you and prevent it from reappearing.
Remove dirt with ammonia
Ammonia copes well with traces of soap suds and dirt. To prepare the solution, 2-3 tbsp. l. ammonia is mixed with a liter of water. Use a soft brush to treat areas of contamination, then rinse with plenty of water and wipe dry with a microfiber cloth.
This method must be used very carefully. The composition should not be left for longer than 2-3 minutes.. Otherwise, the surface may become unusable.
Hydrogen peroxide and soda
Combination of ingredients Helps get rid of limescale and, formed in the corners of the booth.
To perform the procedure baking soda pour onto contaminated areas and leave for half an hour. Clean the surface with a sponge, and then spray hydrogen peroxide onto the remaining powder and leave to dry. The mixture is wiped with a dry cloth and the cabin is rinsed with water.
Citric acid
Cleanses glass surfaces shower cabin. Dissolve 20 grams in 200 ml of warm water. powder.
The solution is sprayed onto the doors and walls with a spray bottle, then left for 15 minutes. Afterwards, wash off the mixture with water and wipe the glass dry.
For washing the tray folk remedies should be selected very carefully. Various materials when in contact with acid or alcohol, they can deteriorate, and stains and cracks form on the surface:
- acrylic pallets clean using toothpaste or a silver polish, vinegar with citric acid saves from rust and lime;
- enameled surface washed with gels and powders, since it is not capricious, rust is removed with turpentine mixed with salt;
- stainless steel– strong and durable, for cleaning use a mixture of chalk and soap in equal proportions;
- chrome faucets wrapped in a napkin previously soaked in vinegar or citric acid, to get rid of lime deposits.
Prevention and proper care
Every housewife knows that fresh dirt is much easier to clean off than old limescale and soap film. Therefore, it is important to pay attention to prevention, daily care and cleaning of the shower stall. How to properly care for her?
Daily Activities:
- After taking a shower, it is recommended to wash off the remaining soap scum from all surfaces: first with hot and then with cold water;
- If plain water does not help, use liquid dishwashing detergent;
- To get rid of water drips that leave whitish spots, wipe the surfaces of the shower stall dry with a microfiber cloth.
Of course, carrying out such procedures after each shower takes a lot of free time. However, to maintain order, such actions are simply necessary. If you are short on time, you can stick to a weekly routine:
- clean the booth using gels or creams, applying them to the surface and leaving them for a while;
- use sprays to clean glass doors, removing residues with a special window scraper;
- rub chrome parts with creams;
- wipe all surfaces dry.
After weekly cleaning general cleaning may not be necessary, which will require less effort and time. At the same time, prevention methods will also free up time for rest and extend the life of household appliances:
- regularly ventilate the bathroom and also check the operation of the ventilation system;
- use high-quality sealant to prevent the formation of fungus;
- to avoid the appearance of limescale and salt deposits, install a filter to purify the water;
- during cleaning, use antibacterial agents to prevent the appearance of germs and mold;
- leave the shower door open for ventilation.
Considering that the purchase new technology entails significant costs, preventive measures will help preserve family budget . At the same time, the absence of fungus and mold will have a positive effect on the health of household members.
Water-repellent coatings
One more no less effective method Prevention of contamination of glass doors is the use of water-repellent agents against drops. Dust, together with water and soap suds, settles on the surface of the glass, leaving whitish streaks and dirty spots.
Before and after applying hydrophobic coating
Household chemicals help clean glass doors, however, do not protect against the emergence of new ones.
The water repellent is hydrophobic coating for glass in liquid form, which is also called “anti-drop”. After applying it, the water simply rolls over the glossy surface, leaving no traces. The hydrophobic coating protects not only from water, but also from dirt. The product contains three components that are mixed before application. It does not contain harmful solvents and is therefore safe to use.
This universal product has many advantages:
- easy to apply, no need to use special tools;
- repels water, dirt and oil, and also protects against dust;
- does not affect the structure of the glass and does not interfere with the penetration of light;
- suitable for glass, ceramics and earthenware;
- one coating lasts for approximately one year, depending on the operating conditions of the glass surface.
Application of a hydrophobic coating is carried out in several stages:
- For work, prepare microfiber rags and a piece of non-woven fabric in advance.
- The room temperature should not be lower than 10 o C.
- The surface is washed and degreased.
- Apply the water-repellent agent using a piece of cloth.
- After obtaining a matte film on the surface of the glass, it is polished using microfiber.
Video
Maintain cleanliness plumbing equipment important because pollution, mold and mildew negatively affect human health. When inhaled, microbes enter the body and cause various diseases. In addition to protecting your health, cleaning is essential to extend the life of your shower stall. At the same time, properly selected products will keep the surface in its original form.
02/19/2017 1 3 627 views
Shower cabins are, of course, a very pleasant thing in every sense, but cleaning them is much more difficult than a bathtub. If you don’t know how to clean your shower stall from limescale, don’t worry.
There are dozens of ways to get rid of lime traditional methods and special chemicals detergents. We will tell you about the most effective of them.
Why does limescale appear in the shower stall?
The main problem with our plumbing is low quality tap water. As a rule, it has increased rigidity and contains large specific gravity metals and calcium salts. We then see all this “good” on the shower stall, in the lime deposits of the shower nozzles, and so on, and cleaning them is not at all easy.
The higher the hardness, the more often you have to work to remove limescale. Modern high-quality filters could solve the problem. But if it is not possible to install them, then we recommend systematically cleaning the plumbing. At the right approach Cleaning the shower cabin will not take you much time.
Types of cleaning
If you relate to household, as a science, and apply scientific methodology to cleaning, then we need to distinguish three main types of “special operations”.
- Daily cleaning – this is required by basic rules of personal hygiene and order. If you took a shower, rinse the shower stall after yourself. hot water, then wipe it with a dry cloth. This is quite enough to keep the cabin clean.
- Basic care - about once a week (if necessary, more or less often) wash the shower stall with household chemicals special purpose– for washing baths and showers. Go through the corners of the cabin with a soft brush once a week. Use a sponge to rub particularly dirty areas and rub the glass. If you see a slight limescale deposit in the shower stall, rinse it with ordinary soapy water (if it is thin and not old, this will be enough) or use one of the special household chemicals. In a word, scrub, wash, put away, but do not forget to thoroughly wipe the cabin dry after completing wet cleaning.
- Major cleaning – About once every few months, the shower stall in the bathroom requires a thorough cleaning. If you have ignored routine cleaning, and your room is still damp, then you will have to fight not only lime deposits, but also mold. This problem also occurs when the apartment or house has not been used for a long time, and the shower stall has been left without ventilation for a long time. During major cleaning you will need special strong cleaning agents. chemicals, because ordinary household chemicals may not cope with severe stains, especially mold.
We use detergents
To effectively and quickly clean the shower stall, you need to use a gel, powder or aerosol for washing bathtubs and shower stalls. Aerosols are especially convenient to use. They are easy to apply to vertical surfaces, they spread easily and have excellent cleaning properties.
Apply your detergent to the stained area and leave for 10 minutes, then use a sponge or soft cloth over all surfaces and rinse off the cleaner with water. Well, then wipe the cabin dry.
To get rid of thick lime deposits, use stronger special-purpose products. However, avoid those that contain:
- aggressive acids (for example, formic acid);
- acetone and other solvents containing it;
- formaldehyde.
Removing stains using such products may result in the plastic melting. At best, it will turn gray or become stained.
It is also not recommended to use rough abrasive materials for washing plastic elements shower cabin. They can leave scratches, where dirt will subsequently get clogged, fungus can form there, and then cleaning the shower well will be a big problem.
Traditional methods
If you don't like to use household chemicals on the farm, you can use folk remedies. Experienced housewives They always know how to clean up dirt in the bathroom or kitchen. This product is found in any kitchen and is usually used in cooking.
Soda! She is not only excellent universal remedy for cleaning, but also has the ability to disinfect surfaces. Most often, soda is used in combination with other substances, which greatly increases its effectiveness.
- Mix a glass of hot vinegar (about 40 degrees) and 1 tablespoon of soda and wipe with this solution the places where you notice lime deposits. Wipe thoroughly and rinse with water.
- You can only use vinegar, no soda. But be sure to heat it up.
- You can only use baking soda, but it can leave scratches on soft plastic.
- For soft plastic, it is better to use toothpaste. It perfectly cleans metal and chrome surfaces. With its help, you can rub taps, hoses and watering cans to a mirror-like state.
- Vodka is good for cleaning mirrors. Spray pure vodka or diluted with water in a 1:2 ratio using an aerosol, then rub the mirror until it shines.
- If you have not only limescale, but also mold, you cannot do without ammonia or ammonia. Mix 100 g of ammonia with 50 g of soda, 50 g of vinegar and pour 2 liters of hot water into this mixture. This thermonuclear liquid will help you remove mold easily.
After such treatment, be sure to ventilate the room and wipe the surfaces dry. In general, any household chemicals can only be used in ventilated areas, otherwise you may be poisoned by harmful fumes.