Aliexpress - nozzle scissors for a drill, a Cricket screwdriver for cutting metal: review, price, catalog, reviews, photos, sales, discounts, free shipping, best sellers and stores. Nozzle on a drill for cutting metal - we mechanize a difficult operation C

The need to cut products made of metal arises in many situations related to construction and repair work. To fulfill this technological operation special equipment is used various types, but if it is not at hand, a drill attachment for cutting metal can help. Using such nozzles and manual electric drill, you can effectively cut thin workpieces made of various metals.

Types of metal cutting equipment

You can cut a metal sheet or a more massive metal product using various equipment.

This device is also known as the "Bulgarian". It can be used to cut rebar, plate metal and other types of metal products. This is the most popular equipment used for such purposes.

Such a saw allows you to make cuts at different angles and perform them with great accuracy. Meanwhile, when using this equipment, the resulting cuts have a limited depth and form a large number of waste.

This is a high-performance metal cutting equipment, with the help of which workpieces of a simple configuration are processed.

Such equipment allows you to perform cuts at different angles. Like a jigsaw, and band saw because of their design features impose significant restrictions on the size of products that must be cut.

Equipment of this type is innovative. It allows you to cut metal with high precision, while the thickness of the workpiece can reach up to 20–30 cm. The most significant disadvantage of this cutting method, in which the workpiece is not subjected to thermal action, is the high cost.

As mentioned above, you can also use drill bits for cutting metal products, which are on modern market presented in a wide variety.

Features of the use of nozzles on a drill

Nozzles, with the help of which an ordinary electric drill turns into a device for cutting metal, in fact, are a punch (cotter pin). Making numerous reciprocating movements in the internal cavity of the matrix, such a punch pierces a metal sheet, forming a cut line on it, the width of which is 3.1 mm. When using nozzles, a point effect is exerted on the treatment area, due to which the protective layers on the surface metal product fully retain all their functions.

With the help of a drill attachment, you can cut metal sheets of the following thickness:

• made of aluminum - up to two millimeters;
• made of copper, brass, sheet iron, zinc and galvanized steel - up to one and a half millimeters;
• made of stainless steel - up to eight tenths of a millimeter.

The reciprocating movement of the punch, which is the main working body of the nozzle, is reported due to the rotation of the chuck of an electric drill. It should be borne in mind that such a nozzle can effectively cut a metal sheet only if it is used in conjunction with an electric drill, the chuck of which rotates at a frequency of at least 2700 rpm.

Benefits of using drill bits

Drill bits, when compared with this popular instrument for cutting metal, like a grinder, they have a number of advantages.

1. The cut is of high quality.
2. When using a drill attachment for cutting metal, there is no need to purchase additional expendable materials which saves a lot of money.
3. The use of such a nozzle provides high performance cutting process.
4. Drill bits are highly versatile.
5. Due to the fact that this tool is equipped with a special handle, the cutting process with its help is very convenient.
6. These attachments are suitable for both electric and pneumatic drills.
7. The convenience of these nozzles is undeniable both in use and in maintenance.
8. With the help of such tools, cuts of almost any configuration can be made.

Despite the simplicity of the design of such nozzles, their use requires certain skills and dexterity from the user.

Popular models and their applications

Modern models drill attachments allow you to cut sheet metal not only in a straight line. With this convenient and easy-to-use device, you can also perform curly cuts which is often required during installation roof structures, ventilation ducts, as well as gutters and other elements of the drainage system.

Using such nozzles on a drill, cuts can be made in almost any spatial position. An equally important advantage of these nozzles is that they do not require pre-configuration.

Among the most popular models of nozzles for drills for cutting metal, presented on the domestic market, are the following:

• "Cricket" (from the company "Enkor");
• Sparky NP 1.8L;
• EDMA NIBBLEX;
• ACCO YT-160A.

The differences between the models of nozzles for drills are not in the principle of their operation, but in the maximum thickness of the metal being cut and a number of other technical characteristics. Modern models of nozzles for drills allow you to get even and neat cuts with sharp, even and uncluttered edges. Wherein protective covering applied to the surface sheet metal, is not damaged and fully retains all its functions.

"Cricket"

One of the popular attachments for a drill, which is a compact nibbling (cutting) scissors, is a device called the Cricket. This nozzle, which allows you to get a smooth and accurate cut, can be used for cutting both flat and profiled metal sheets.

Nozzle-scissors "Cricket" is designed to operate from a pneumatic or electric drill (screwdriver) with a power of at least 420 W

With the help of the “Cricket” scissors attachment, you can cut not only a metal sheet, but thin-sheet products made of polycarbonate and other polymer materials. The thickness of products that can be cut with this compact nibbler can be up to:

• 1.5 mm - for steel sheet material;
• 1.2 mm - for stainless steel;
• 2 mm - for copper and aluminum, as well as polymeric materials.

With the help of the attachment for the Cricket drill, it is possible to cut sheet material in horizontal and vertical planes, as well as to perform internal cuts on the surface of the sheet.

It should be borne in mind that in the place of the sheet from where the internal cut will be made, it is necessary to pre-drill a hole.

"Cricket" is good nozzle on a drill for cutting metal tiles and corrugated board. When using this device for cutting metal, the surface of these materials is not deformed, and the cut itself is smooth and accurate. The Cricket nozzle can easily cope with such challenging tasks like artistic cutting and creating in sheet material large diameter holes.

"Steel Beaver"

Another popular drill attachment that can be used to cut metal is the Steel Beaver. The principle by which such nozzles work on a drill is similar to how punching scissors function. When using this device, sparks are not formed in the cutting zone and there is no thermal effect on the metal sheet, respectively, the protective coating that is applied to it is not burned.

In this article we will talk about the nozzle for cutting metal on a drill and screwdriver - "Cricket", presented on Aliexpress.

Often, for a power tool, you have to buy additional nozzles for specific jobs, or simply to replace the old ones. One of these is a nozzle for screwdrivers, drills and hammers. "Cricket". You can buy this device at Aliexpress at low price.

Nozzle for a drill, screwdriver "Cricket" on Aliexpress: catalog, photo

Nozzle for a drill, screwdriver "Cricket" on Aliexpress

A small nozzle with a name "Cricket" Designed for installation on power tools - screwdrivers, drills, perforators. She can cut sheet metal, which allows you to expand the functionality of the tool and perform more operations than usual.

Tool steel is used for manufacturing, which provides the tool with high level strength, and also makes it possible to work with most known materials. What's more, the carefully planned design ensures low noise levels.

At the main device where it is installed "Cricket", power must be at least 0.4 kW. This value allows you to effectively cut metal without bending the metal edge. It is worth noting that many have such power household tools, such as a drill and a hammer drill, as well as a screwdriver.

The length of the fixture is 180 mm, which allows not only to carry out work in workshops, but also in confined spaces. The power sensing mechanism is based on a six-faced shaft, which has excellent grip and high strength compared to simple round shafts.

Thanks to the use of high-quality steel for the manufacture nozzle "Cricket" capable of cutting even thick metal sheets. For stainless steel, this figure is 1 mm, and for soft alloys - 1.6 mm. If we talk about aluminum, then the thickness can reach 2 mm. The nozzle makes it possible to do even round holes with a diameter of 11 mm or more. The features of the device also include a small width of the cut track - it has a size of only 1.6 mm. Thus, significant metal savings are achieved, which cannot be achieved with the use of hand tools.

Nozzle for drill, screwdriver "Cricket" on Aliexpress: discounts, sales, free shipping

Every day you can benefit from the site thanks to the following sales -, "Deals of the Day at the Mall", and . There are other promotions as well. Find out which one is this moment conducted or to be, you can on the main page of the site in a special block:

It is worth mentioning the possibility of free shipping. To find such products, in the catalog, under the search bar, select the appropriate filter:

Free shipping with Aliexpress

Nozzle for drill, screwdriver "Cricket" on Aliexpress: the best sellers and stores

Aliexpress is a huge online marketplace with thousands of sellers. Unfortunately, not all of them work honestly. Although the administration is actively fighting scammers, there is still a risk of receiving low-quality goods or even being left without them. Therefore, it is worth learning how to choose stores to buy. We talked about how this is done in the article.

Or a hacksaw is not available, then you can use an electric drill with special nozzle. Such devices allow you to separate a piece of sheet steel, and some models allow you to work with a metal profile.

These devices have not only a large number of advantages, but also limitations, the main of which is the thickness of the material with which you can work.

The use of such equipment can be not only in the absence of alternative way process the material, but also in the case when heating the metal sheet is undesirable.

Among the main advantages of using a nozzle on a drill, before using a grinder, the following can be distinguished:

1. Better cut surface quality.
2. The device allows you to make a hole in the metal of any shape.
3. Significant savings Money, due to the lack of spending on consumables.
4. The tool is very easy to use.
5. Many nozzles allow you to work with both metals and plastic sheets of appropriate thickness.
6. When using a drill equipped with battery, can be performed in places where it is not possible to connect to the home electrical network voltage 220 V.
7. The ability to combine several functions in one device at once. If there is no need to cut thicker metal, then a drill can be used to drill holes and to cut the metal sheet.
8. Light weight fixture.

The main advantages of this product over other types of metal cutting are listed. Models of such nozzles can differ significantly in many respects, including cost.

Scissors

The scissors attachment for a metal cutting drill is a device that converts the rotation of the drill chuck into reciprocating movements, which, thanks to a special matrix, knock out a 3.1 mm thick strip in the metal.

With this method of separation, the cut is even and of high quality, which allows you to almost completely abandon the additional processing of the material in the future.

With a kind of scissors, you can cut metal, the thickness of which is not more than:

• 2 mm - when processing aluminum.
• 0.8 mm - if you need to cut stainless steel.
• 1.5 mm - for processing copper and brass.

This attachment for a drill for cutting metal will allow you to separate the material only if the electric motor of the tool develops at least 2700 rpm.

"Cricket"

The nozzle "Cricket" is universal fixture, with which you can perform the separation of not only metal, but also various plastics. The advantage of this tool is the ability to cut both sheet and profile material.

Thanks to the use of two cutting heads, the cut is perfectly even and does not require additional processing after cutting is completed.

With this type of device, it is possible to process material of the following thickness:

• Aluminum - up to 2 mm.
• Steel - up to 1.5 mm.
• Plastic - up to 2 mm.
• Stainless steel - up to 1.2 mm.

In order for the structure to last as long as possible, and the cut of metal or other material to be as even as possible, the manufacturer recommends using this device with a drill engine speed of 1500 to 3000 rpm.

"Beaver"

The nozzle "Beaver" works on the same principle as the above models. With it, you can perform both straight cuts and curved cuts with a minimum radius of 1.2 cm.

The beaver has little the best performance for cutting sheet metal, for example:

• Steel - up to 1.8 mm.
• Stainless steel - up to 1.3 mm.
• Aluminum - up to 2 mm.

Price of popular devices

Quality tools are not cheap. For cutting metal, fixtures must be made of a material that is subjected to constant loads not deformed. Among the variety of both domestic and foreign manufacturers products of the following brands should be distinguished:

1. Nozzle - NP 1.8 SPARKY 181874 - the device is made in Bulgaria and is of high quality and reasonable price.

The device allows both linear and radial cuts, while the quality of the edge will be the highest regardless of the type of material to be separated. SPARKY 181874 can be used as a drill attachment for cutting metal tiles, which will significantly speed up the process of roofing.

The price on the Russian market is about 2,000 rubles, but this cost is fully justified, since the attachment for the SPARKY drill is a high-quality product that will last a long time.

2. ENKOR 14209 - Cricket-type stray, Russian production.

The device allows you to perform high-quality cutting of sheet aluminum up to 2 mm thick. Indispensable when working with roofing metal materials, since, unlike grinders, it does not heat the metal.

The thing can be purchased for 1900 rubles in any specialized store.

3. "Steel beaver" - made in Russia and allows you to work with various metals.

With the Steel Beaver, you can easily cut off a piece of aluminum, while the edges will be completely intact. Restriction on maximum thickness metal, in this case is 2 mm.

The device can also be used for cutting stainless steel. In this case, in order not to overload the tool, it is not recommended to use a sheet with a thickness of more than 1.2 mm. The cost of the stray is about 1600 rubles.

4. EDMA NIBBLEX - perfectly copes with the separation of sheet and profile material up to 1.2 mm thick. Aluminum sheet can be processed up to 1.5mm thick.

For effective work nozzles, the manufacturer recommends the optimal drill speed of 3,000 rpm.

The estimated cost of EDMA NIBBLEX in the Russian market is 5,000 rubles. High quality device is confirmed by numerous tests both by professional craftsmen and ordinary people who purchase the device for home use.

5. Malco turboShear TS1 - can be used with a drill and for installation on a screwdriver.

The device is the most expensive of professional devices and will cost the Russian buyer 7,000 rubles. The nozzle is worth that kind of money, as it is made in the USA, where product quality control is much higher than in China.

1. If it is used for cutting for the first time, it is recommended that before starting the main work, make several cuts on unnecessary metal fragments in order to understand the basic principle of the device and avoid mistakes in the future.
2. When working with a metal cutting device, in order to obtain an even cut of the desired shape, it is recommended to hold the drill with both hands during operation.
3. Nozzles for Russian-made drills are practically not inferior in quality to foreign counterparts, while the price may differ significantly downwards.
4. It is not recommended to purchase devices from your hands, you can buy defective goods for a lot of money.
5. Tools should be stored in rooms where the possibility of metal oxidation due to high humidity will be excluded.
(1 ratings, average: 5,00 out of 5)

There are a great many tools that can be useful in everyday life or for infrequent custom work. In order to buy, for example, the so-called "grinder", you will need a considerable amount, and in the meantime the tool will lie somewhere in the garage or workshop idle, being unclaimed.

Not every tool designed for a particular job, a person is able to buy: it will take a lot of money and extra storage space. And, as practice shows, there is simply no point in this. But there is still a way out of this situation.

Nozzles are for the following works:

• Drilling at an angle;
• grinding;
• Polishing;
• Sharpening nozzles;
• Drilling;
• For cutting metal.

As can be seen from what has been said, having only one drill and a few nozzles, you can thus replace a lot of expensive tools and not waste your money.

Basic Sheet Metal Cutting Methods

Sooner or later, every homeowner, not to mention specialists, cuts sheet metal in one scale or another. Ever since labor lessons at school, and for many after, in production, such tools for cutting metal are known:

But time goes by and technical progress does not stand still. Mankind has invented a simple and inexpensive cutting tool that works in tandem with an electric drill called "metal nibbling scissors". This equipment is simple, constructive and very convenient in operation.

When there is one in the tool arsenal of any man, as well as an electric drill, then there are no problems with cutting a metal sheet and cannot be.

And if there is none on the farm, then it can be purchased at the nearest household or construction market.

Good alternative to Bulgarian

This drill attachment has been helping out craftsmen for many years now. Such a tool is called nibbling scissors.

Easily punches a track about 3 mm thick in metal. This cutting method gives the desired cleanliness of the cut, and there is no particular need for further cleaning of the cut.

Thicknesses of materials that the scissors can cut:

• Copper and brass - 1.5 mm;
• Aluminum - 2 mm;
• Stainless steel - 0.8 mm.

For metalworking

These nozzles are scissors simple and original design, where rotary motion the drill chuck is converted to reciprocating.

Nibblers "Cricket"

The technical capabilities of the "Cricket" nozzle allow cutting metal and plastics. Moreover, the material can be cut both sheet and profile. Two cutting heads of the cutting nozzle on the drill allow cutting materials certain thickness (specified maximum thickness):

1. For aluminum - 2 mm;
2. For steel - 1.5 mm;
3. For stainless steel - 1.2 mm;
4. For plastic - 2 mm.

Additional characteristics:

• Electric drill power from 420 W;
• Turnovers - from 3000 rpm;
• Cutting radius (minimum) - 12 mm;
• The cutting direction is unlimited, hence 360 ​​degrees.

Application area:

1. Mounting;
2. Roofing works;
3. Production of gutters;
4. Disassembly of various structures;
5. Body work;
6. Curly (decorative) cutting.

When working with nibblers, the drill does not require any adjustments and special skills and knowledge.

The Cricket tool for cutting metal is very maneuverable, and its capabilities are cutting tool are very wide.

As for cutting with a grinder, there are a number of disadvantages here, compared with cutting shears for metal. The nozzle on the drill has a number of significant advantages:

• The material does not overheat during cutting, which is especially valuable when cutting metal tiles.
• The maneuverability of nibblers for a drill is much higher than that of a well-known grinder.
• Higher cutting speed.
• A cleaner saw cut that rarely requires further plumbing.
• When working with nibblers for a drill, there are no jamming of the tool from distortions, which very often happens when working with a grinder, hence the almost complete absence of injuries.
• Zinc does not burn paintwork material, which helps prevent premature corrosion and, most importantly, maintain the warranty on the material.
• When working with the Cricket tool for cutting metal, there are no sparks, unlike a grinder, which not only protects the material from burning, but also eliminates the possibility of injury to the eyes of the worker.

Nozzle-scissors "Cricket" has a number of analogues, for example:

1. "Beaver";
2. "Steel Beaver";
3. Scissor attachment NP 1.8 SPARKY;
4. EDMA NIBBLEX;
5. Malco turboShear TS1 - can be used with a drill and for installation on a screwdriver.

All of the listed nozzles have some differences on technical specifications and prices. The most expensive nozzle is Malco turboShear TS1. It has a slightly different design and is made in the USA, not China.

It should be noted that normal work of these devices can only be provided with a passport drill speed of more than 2700 rpm.

Nozzle for screwdriver

If an electric drill is not available, then a screwdriver can also perform the same functions.

There is, however, a difference:

• The revolutions of a screwdriver are lower than those of a drill. Low speed and, accordingly, the power of the power tool will not allow cutting metal with the same productivity, especially if it is closer to 2 mm in thickness.
• Lack of inertia. After the user releases the button, the chuck immediately stops rotating. In terms of safety, this is even somewhat better, as well as in the case of a figured cut.
• Small size and light weight compared to a drill. This allows you to do all sorts of "pirouettes" when cutting, more easily than with a drill.
• Screwdrivers run on batteries, therefore, its operation is autonomous, and power cord does not interfere with normal operation.
• There is no adjustment of the rotation speed of the cartridge.

It is quite clear that a screwdriver can also be used instead of a drill with a Cricket type nozzle.

For cutting metal tiles and more

This nozzle is a real find for cutting material such as metal tiles.

Advantages:

1. Does not damage the material and coating;
2. Easily follows the contour of the material profile;
3. Able to make cuts of varying complexity.

"Cricket" is a real find for both the handicraftsman and the professional. It can make an internal cut and can work both horizontally and vertically.

The nozzle for cutting metal tiles allows you to cut metal tiles and corrugated board, with which this tool does an excellent job. After all, it is well known that it is difficult to work by making cuts in these materials with another tool, and the Cricket copes with this task perfectly: cleanly, quickly and without errors.

Advantages and disadvantages

Advantages:

• Surface cleanliness is better than that of a grinder.
• This device can make holes ("windows") of any complexity in the metal.
• The tool is easy to use and maintain, takes up little storage space.
• Low price.
• You can cut both metal and plastic, as well as carbonate of a certain thickness, stated in the instructions for use of this equipment.
• The possibility of using the device in places where there is no power supply is compensated by the presence cordless drill. In addition, it can be successfully used in damp rooms, where using an electric drill from the mains is life-threatening.
• The device is multifunctional.
• The low weight of the device is also an undeniable advantage.

Of the shortcomings, there is the only and main one: the device must be held with both hands, which is not always convenient and safe when working at height.

In conclusion, I would like to summarize what has been said. Any user, both beginner and experienced, who does not want to overpay for a fabulously expensive tool, can always buy an inexpensive analogue that will pay for itself very quickly by performing the same functions.

Very often it turns out that suddenly there was a need to use a cutting tool, and it was not included in the plans to buy something expensive, which is not known when it will be needed (if it is needed at all).

AT this case it is cutting shears for metal that will come in very handy.

That's why cutting attachment found on a drill wide application in many branches of human activity: repair, assembly, dismantling and restoration.

Good luck with your purchase and enjoy working with the Cricket attachment for metal cutting!