Scher-Khan car alarm programming. Scher-Khan Magicar 5 car alarm programming manual

When installing a modern and multifunctional alarm system on a car, you need to understand the procedure for using and possible mistakes. Such systems include the Sherkhan 5 alarm system. It is also important to entrust the initial installation and debugging of work to professionals.

Purpose of the alarm

Car alarm Sherkhan Magikar 5 belongs to the category of devices with signal control through a separately dedicated radio channel. Mutual communication between the key fob-communicator of the user and the process control unit is distinguished by the possibility of signal transmission over a distance of up to 1.5 km.

The system, taking into account its high functionality, performs a number of security operations:

engine blocking with protection of system components;
engine autostart with the possibility of taking into account individual parameters;
sound accompaniment of security siren hidden from access.

The main functions are feasible through the implementation of auxiliary operations that can be activated by the user.

All functions of the security system

Even correct installation does not allow you to use possible functions without debugging and testing them. Therefore, you should carefully study all the provisions Magicar instructions 5. Separately, you should consider the possibilities of the key fob, processor unit and some technical parameters.

Key fob functionality

The device has a liquid crystal operating screen and is made in one housing with 4 control keys. Among the main functions are:

Security code . Using Sherkhan 5 Magic Code, all signals are protected during transmission.
Control of executed commands through audio and video support.
Discharge level indication Car battery.
Engine run time display after autostart, current time.
Running engine reminder.
Interior temperature display cars.
Reminder of received alarm messages.
Manual remote motor start symbol.
Processor operating functions

When interacting with the key fob, the Scher alarm processor Khan Magicar 5 generates the following commands:

engine starting in automatic mode when specifying one of the two options for the transmission unit (automatic transmission or "mechanics");
setting offline start interval(2, 4, 8 or 24 hours) or conditions (at a certain temperature in the cabin or antifreeze);
issuing a command to force the engine to start;
engine stability control;
setting the algorithm for starting the motor, taking into account the features - the type of engine, starter operation time, etc.;
task of personal identification codes for signaling scher if the key fob or key is lost;
the ability to set the auto protection mode after starting the engine, priority unlocking the driver's door;
performance of service functions: light off delay, automatic arming of the car - "without key fob".

Such a wide functional range would not have been possible without the task of excellent technical abilities.

All technical features

To perform its functions, the security system uses several methods to protect electrical networks:

installation of slow-acting fuses taking into account the connection scheme;
using internal combustible resistors when the current is exceeded;
installing internal transistors;
using directional diodes in case of a change in the direction of the current;
installation of varistors for protection against voltage surges or when creating impulse noise.

The alarm has a wide operating temperature range (-40°C - +50°C), low current consumption (no more than 35 mA in standby mode) and a small unit weight - 270 g. Such indicators indicate a well-thought-out and effective system.

In the alarm mode, the Sherkhan 5 alarm system can work in one of three ways:

sound siren (continuous signal, duration 30 seconds);
optical signal(triggered by an alarm, the sound is intermittent at a frequency of 1 Hz for 30 seconds);
radio signal(the time interval of the sound notification is 100 seconds, the sound itself is intermittent with a frequency of 0.35 Hz).

At the same time with general protection vehicle operating instructions indicate the presence of additional protection barriers, in particular:

Objects under protection. Sensors for controlling the opening of doors, trunk, hood, shock. When you try to open, an alarm sounds (30 seconds) with the impossibility of turning off after arming.
Radio communication channel with the system. Provides constantly changing coding of the transmitted signal.

Food for consumers is provided by the following sources:

Processing unit- car battery - 12V.
key fob switch- built-in battery class "AAA" - 1.5V.
Keychain– 2 built-in batteries of class “CR2025” – 6V.

To set up operating modes and fully use the security system, you should remove the protection against the discharge of the key fobs battery, and get acquainted with the symbols and purpose of the buttons. If the key fob does not work, the gasket between the contact and the battery is removed. The beginning of the work will be a confirming characteristic melody.

Using key fobs Sherkhan 5

The functionality of the switch corresponds to the symbols specified in the operation manual and is expressed in the following positions:

low battery indication and switch to power-saving mode;
auto parameter status display- battery voltage, interior temperature, current time;
Valet mode indicator;
guard mode symbol, unlocking and locking locks;
sound indicator;
display of disabled shock sensor;
vibration alert enabled;
using passive arming;
activating hands-free mode;
open door indication or hood;
engine start display or using the ignition lock;
indication of the included parking lights;
active timer start mode;
Turbo mode activation;
call sensor activation;
alarm mode display when the secondary shock sensor is triggered.

For effective use of all possibilities, you will need to deal with the question of how to configure and how to enable individual functions. Programming is carried out from a key fob with 4 working buttons. To facilitate the order of use, you should assign serial numbers to the keys:

Lock button– I.
Key with open lock and key– II.
open trunk– III.
Question mark - IV.

Correct operation of the Scher Khan car alarm is possible only if the correct time is set. This is required when using the alarm for the first time or after changing the batteries.

Installation is carried out according to the following algorithm:

Step 1. Press the combination of buttons II + III, hold for 2 seconds. The programming mode is called.
Step 2. Press the I button, hold for half a second. The mode for changing the current time is activated.
Step 3. Press the I button again, hold for half a second. Set the clock rate.
Step 4. Press button II, hold for half a second. Set the minutes.
Step 5. Press the combination II + III, hold for 2 seconds. We exit the programming mode (confirmed by sound).

Only when the time is set, it becomes possible to link the alarm to the engine start by timer.

Further configuration is related to the activation of operating modes. To learn how to program the work, you should study the following algorithm:

Action 1. Press the II + III buttons, hold for 2 seconds. The programming mode is activated.
Action 2. Press button III, do not release 0.5 sec. The vehicle call mode becomes available. Confirmed by the appearance and symbol of the lifted handset.
Action 3. Press and hold the IV button for half a second. The key fob vibration mode is called.
Action 4. Press the combination I + IV for 0.5 seconds. Change the temperature format.

Successful execution of the second step will occur when the functions are activated no later than 15 seconds after the end of step 1.
When using key fobs in the dark, the backlight is activated by briefly pressing the "III" key. In the same way, the backlight turns off.

Now the alarm is ready to work, but for correct operation, you should study some questions on how to use individual modes.

Alarm operating modes

Regular use of the alarm brings all the actions of the owner to automatism. But on initial stage you need to find out all the nuances of individual operating modes.

Arming and passive mode

The main operating mode is arming the machine. Its activation should be carried out with securely locked doors and hood and trunk lids. In this case, press the "I" key. Successful action will result in:

For siren signal- single signal.
For alarm - one-time flash.
Built-in LED- runs at a frequency of 1 time per second.
Switch Display- 5-fold blinking of the "headlights" of the car with the transition to the indicator of the closed lock.
Key fob signal- a single beep.

In the future, the system will automatically put the following components into operation:

door, hood and trunk sensors;
shock sensor - 30 seconds after the start of work.

When operating the alarm, it should be taken into account that if one of the doors is not tightly closed, the protection is activated bypassing the sensor of the marked element. In this case, the ignition is still blocked. In the future, working capacity in full protection mode is easily restored.

When using the light delay function in the cabin, you should program the function to delay the start of arming the car for this time.

The need to protect a car with a running engine arises when the car warms up, leaves the passenger compartment for a short time (if it is necessary to open the gate, etc.). The function is programmed by activating the "Passive" command under index 1-5. The start of passive protection is accompanied by the same inscription on the display of the switch.

Alarm message

When an intrusion attempt is made, the alarm goes into alarm mode. This is expressed in the following manifestations:

Sound signal and emergency– works within 30 seconds.
Internal indicator- blinking with a frequency of 1 second.
Display - the symbol blinks according to the cause of the alarm.
Key fob operation - initial intermittent signal (30 sec.) followed by a reminder every 2 sec.

The system is transferred to the armed mode by pressing the "I" or "II" buttons, or there is an automatic transition after the first 30 seconds of the alarm. If the factor continues to be affected, the alarm mode will be used 8 more times. When the shock sensor is activated, the alarm state lasts for 15 seconds according to a similar algorithm.

Disarming

In the normal disarming mode, the II key is used. Process completion confirmation is accompanied by:

For siren signal- double signal.
For alarm- double flash.
Built-in LED stops working.
Switch Display- 5-fold blinking of the "headlights" of the car with an indication of an open lock.
Key fob signal– 2x short beep.

Safe mode involves entering a PIN code after pressing the "II" key once and using it again. This feature is activated via the setting mode function with index 1-19. Activating channel 2-11 allows you to use the function step by step opening doors.

Remote start mode

The engine is started for warming up by pressing the "II" button for 2 seconds. In this case, the car is armed and the engine starts. The keyfob-switch reports the time until the engine stops in the reverse timer mode.

To answer the question of how to reset the engine run time, use the programming mode (function 1-12). The warm-up time is set in the range of 5-45 minutes in increments of 10 minutes.

Additional features

Among additional features It should be noted:

Panic mode. Activated by pressing the IV button for 2 sec. and stops the engine from starting automatically. After 90 seconds, the system switches to the standard armed mode.
Jack Stop Mode. It involves stopping the engine forcibly (even while driving). It is set as an alternative to the "Panic" mode through a task in the "Programming" section. Both modes are canceled after a short use of buttons I or II.
Valet mode. Allows you to not use the door lock. This function is used when visiting a car service. The I+III buttons are shared for 2 seconds.
Remote start timer. Used when the engine needs to warm up.

The mode is activated according to the following algorithm:

Step 1. Press the combination of buttons II + III (hold for 2 seconds). The programming mode is activated.
Step 2. Press and hold for 0.5 seconds. button II. Go to the timer setting mode.
Step 3. With the I button we change the hours, with the II button we set the minutes.
Step 4. We exit the mode using the II + III combination (press, hold for 2 seconds).

If you need to turn on the function, or if a question arises - how to turn off the timer, use the same short press of buttons II and IV.

Violations of normal operation

Operating experience allows us to call Sherkhan 5 reliable signaling- at the level of Starline A8 and Starline E90. However, some malfunctions still occur during the operation of the equipment:

Sensor failure. One of the most common causes is wire breakage, contact damage.
Malfunction in Valet mode. When activated, the system does not close the doors.
Refusal to execute commands from the key fob. If the battery is in good condition, the failure may be caused by damage to the antenna.

In the event of a complete failure to work, allow the most simple reasons failure. You should not be interested in how to flash the system again before checking the power supply to the processor.

To correct failures, comments and reviews on the forums do not always help. If a possible ways eliminations have been used, and the malfunction has not been eliminated, the restoration should be entrusted to specialists. Preliminary specify the malfunction and you will be answered how much the repair costs.

With the timely diagnosis of problems, the car will always be under reliable protection.

Car Alarm Sherkhan 5 User Manual

MAGICAR V

User's manual

PURPOSE

The Sherkhan 5 system is a car alarm with the ability to control via radio using a key fob-communicator with a liquid crystal display. The system exchanges information between the key fob-communicator and the processor unit at a distance of up to 1500 m. Sherkhan 5 has a function for automatically starting the engine by commands from the key fob or by commands from the internal timer. The system is designed to work on gasoline or diesel vehicles with a fuel injection system and an on-board network voltage of 12V. Protection of the processor unit, shock sensor, call sensor, antenna unit is made according to the IP-40 standard and provides for installation in the car. The siren is IP-65 rated and can be installed in the engine bay away from the exhaust manifold and high voltage systems.

Keyfob communicator functions

Multifunctional, 4-button LCD keychain communicator
Protection against interception of MAGIC CODE code packets
Audiovisual confirmation of executed commands
Vibrating bell
Loud beeps
Ultra long distance communication up to 1500 m with processor unit
Automatic display backlight
Low battery indication
Voltage indication battery car
Indication of temperature in the passenger compartment
Current time display
Indication of engine operating time in automatic mode
Remote engine start
Programming the engine start time (accurate to the minute)
Sound and visual alert reminder mode
Operational, from the key fob, programming of all system functions
Economy Power (one AAA element)

Processing unit functions

Automatic engine start for vehicles with automatic or manual transmission
Operation of the starting system with both petrol and diesel engines
Operation of the starting system with engines having a turbine
Starting the engine on command from the key fob
Automatic engine start every 2 hours
Automatic engine start at a pre-set time every 24 hours
Monitoring the engine start by signals from the generator or by noise in the on-board network
Personal code for access to the car interior if the key is lost
Power output for controlling the car's central locking
Trunk release power output
Alarm control power output (two circuits)
Programming the lock relay type
Auto arming (programmable function)
Sound warning before automatic arming
Automatic return to armed mode if the door was not opened
Sound warning before automatic return to armed mode
Armed mode without siren signals
Two universal programmable control channels for additional devices
Ability to connect negative and positive door sensors
Input for negative trunk sensor
Locking and unlocking the door locks when starting and stopping the engine
Possibility of arming with and without confirmation siren signals
Alarm warning about open door(programmable function)
Panic or JackStop mode
Highly sensitive two-level shock sensor with sensitivity adjustment
Function " Free hands"for automatic arming/disarming when the owner moves away/approaches the car
Dual mode hands-free function
Parking lights not switched off warning

TECHNICAL PARAMETERS Sherkhan 5

Alarm types:

Influence on the main and additional electrical equipment of the car

STSTS controls the power supply to:	Maximum current per channel
Starter or ignition interlock circuit	Imax = 0.2 A
Port Alarm Circuit	Imax = 10 A
Starboard Alarm Circuit	Imax = 10 A
Ignition circuit	Current Imax = 30 A
Accessory chain	Current Imax = 30 A
Starter circuit	Current Imax = 30 A
Ignition circuit 2	Current Imax = 0.2 A
Additional siren	Current Imax = 2 A
Relay for unlocking electric door locks or unlocking the standard system of the Central locking (CL) of the car	Current Imax = up to 15 A
Relay for controlling the locking of electric door locks or locking the standard system of the Central lock (CL) of the car	Current Imax = up to 15 A
Power trunk lock relay	Current Imax = 10 A
Control channel additional device 1	Current Imax = 0.2 A
Option control channel 2	Current Imax = 0.2 A
The channel for disarming the STSTS standardly installed on the car	Current Imax = 0.2 A

Control methods

Remotely with a radio frequency transmitter (key fob) at a frequency of 433.92 MHz ± 0.2% with a power of not more than 10 mW
From the ignition key
Automatically based on signals from sensors

Electrical circuit protection

Fuses. (Automotive slow-acting fuses according to wiring diagram)

Spheres of protection

Other parameters

Batteries

* The table shows the average value. The service life of the key fob battery depends on the intensity of use of the key fob and the quality of the battery, the key fob operation modes.

ATTENTION!

Use only quality batteries. Battery Application Low quality can lead not only to a reduction in the life of the key fob, but also to its damage.

KEYFOB COMMUNICATOR

Preparing the key fob-communicator for work

Before using the key fob, you must bring it into working condition, because. during transportation and storage, an insulating gasket is installed between the contact of the battery and the contact plate of the key fob, which prevents the battery from discharging before operation. Before using the key fob, remove it. To do this, release the battery cover lock, press the cover and slide it in the direction opposite to the antenna. Remove the battery. Remove the insulating pad between the battery and the collector plate. Install the battery back, observing the polarity indicated on the bottom of the battery compartment. If there is no indication of the polarity of the battery, then it is set with a negative terminal towards the antenna. Close the battery cover. Keyring is ready to go.

Symbols on the keyfob-communicator display

	Timer start indicator
	TURBO mode indicator
	Passive arming indicator
	Hands-free mode indicator
	Siren indicator
	Shock sensor off indicator
	Vibrating alert indicator
	Indicator of turning on the automatic control of the central lock by ignition
	Door open indicator
	Trunk/hood open indicator
	Shock sensor alarm indicator (optional sensor)
	Car owner call indicator
	Engine running indicator
	Ignition on indicator in security mode, indicator of side lights not switched off
	Key fob transmitter operation indicator
	Battery discharge indicator of the key fob-communicator
	Indicator VALET mode
	Locking and unlocking indicator. Security Mode Status Indicator
	Clock indicator, car battery voltage, interior temperature, engine warm-up time during automatic start

Purpose of the buttons of the key fob-communicator Sherkhan 5

Example notation:

I - quick (0.5 sec.) button press
I- - long (2 sec.) button press
(I + II) - fast (0.5 sec.) simultaneous pressing of the buttons (combination of buttons)
(I + II) - - long (2 sec.) simultaneous pressing of the buttons (combination of buttons)

Control channel number	Button number	Press duration	Executed function (mode)
1	I	0.5 sec.	Enable / disable security mode Enable/disable call mode Stop alarm mode Enable/disable starter/ignition interlock
2	I-(1)	2 sec.	Activate "Hands Free" function first operating mode (symbol does not flash)
3	I-(2)	2 sec.	Activate the "Hands free" function of the second operating mode (the symbol flashes)
4	I-(3)	2 sec.	Deactivate hands-free function (symbol is off)
5	(III+IV) -	2 sec.	Recording and playback of a fragment on the voice module (Option)
6	II	0.5 sec.	Additional channel control 1
7	III	0.5 sec.	Additional channel control 2
8	IV	0.5 sec.	Checking System Status
9	II-	2 sec.	Starting and stopping the engine from the key fob
10	III-	2 sec.	open trunk
11	IV-	2 sec.	"Panic". To stop, press the I button
12	(I+II)	0.5 sec.	Siren on/off
13	(I+III)	0.5 sec.	"Valet" mode enable/disable
14	(I+IV)	0.5 sec.	Automatic control of the central lock by ignition on / off
15	(II+III)	0.5 sec.	Automatic arming enable/disable
16	(II+IV)	0.5 sec.	Timer start enable/disable
17	(III+IV)	0.5 sec.	Turbo mode enable/disable
18	(I+III)-	2 sec.	Shock sensor enable/disable
19	(I+II)-	2 sec.	Enter programming menu 1
20	(I+IV)-	2 sec.	Enter programming menu 2

Note: Sherkhan 5

With a long 2 sec. pressing the I button, the modes change sequentially in the order (1) > (2) > (3) > (1) … . In mode (2), the "Hands free -" function has a high range work- symbol blinking.

Setting the time on the keyfob-communicator display

Setting the current time is required before starting the operation of the system or when changing the key fob battery. Follow the steps according to the table below.

Execution steps		Press duration	Executed function (mode)
STEP 1	(II+III)-	2 sec.
STEP 2	I	0.5 sec.	Turn on the current time setting mode. The indications of the current time are flashing, confirmed by a sound signal from the key fob
STEP 3	I	0.5 sec.	Changing the value of the clock
STEP 3	II	0.5 sec.	Changing the minutes
STEP 4	(II+III)-	2 sec.

ATTENTION!

Setting the correct time is necessary condition for correct operation automatic start of the engine by timer.

Setting the keyfob-communicator, vibration call, owner call, temperature display standard "°F" or "°С"

To set the desired key fob operation mode, follow the steps in accordance with the table below.

Note: STEP 2 must be completed within 15 seconds. after STEP 1.

Arming [Button (I)]

Close doors, hood, trunk. Briefly press button I on the key fob. The system will switch to the armed mode, the door locks will be locked, the starter (ignition) interlock will turn on until the system is disarmed.

When arming:

Enable sensors:

Immediately after the LED starts flashing, the system begins to monitor the status of the doors, hood, trunk, call sensor of the owner of the car.
The shock sensor will turn on after 30 seconds. after arming.

Note:

If, when arming, you heard three signals from the key fob, and on the display for 5 seconds. the image of an open door or trunk flashes, this means that the door, hood / trunk is open in the car. The door, hood/trunk sensor will be immediately armed when its functionality is restored.

The hood area is not displayed separately, the hood sensor must be connected to the trunk sensor wire.

Disarming [Button (I)]

When the system is armed, briefly press button I on the key fob. The system will be disarmed, the door locks will be unlocked, the starter (ignition) interlock will be disabled.

When disarming:

HANDS FREE function [Button (I)-]

ATTENTION!

The "Hands free" mode works only when using a keyfob-communicator with a liquid crystal display; when using optional keyfobs without a display, this mode is not available.

When you press button I of the key fob-communicator for 2 sec. You can turn Hands Free on or off. When the "Hands-free" function is enabled, the system will automatically arm itself when you are 15-35 m away from the car with the key fob-communicator*. or is removed from the security mode and unlocks the door locks when approached. The function has two modes of operation:

In the first mode, the mark on the display does not blink and the range of the function is minimal.

In the second mode, the mark on the display with the inscription "AUTO" flashes and the range is maximum.

The change of operating modes takes a long 2 seconds. by pressing the I button next order: (Function on, mode 1) > (Function on, mode 2) > (Function off) > (Function on, mode 1)….

Arming/disarming will be accompanied by a melodic signal from the key fob-communicator.

Continuous use of the "Hands-free" function is not recommended, as its use drastically reduces the battery life of the key fob.

* Note:

The distance from the unit to the key fob-communicator, at which the system makes a decision to arm or disarm, can vary and depends on a group of objective reasons: relative position antennas of the key fob-communicator and the antenna unit, the presence of metal objects near the antennas, from radio interference on the air, weather, etc. ...

When the hands-free function is enabled:

Mode change is accompanied by one signal from the key fob-communicator.

When the HANDS FREE function is turned off:

Starting the engine on command from the key fob [Button (II) -]

To start the engine, press button II on the key fob for 2 seconds. The system will be armed, the door locks will be locked, the car engine will start. After the engine has started, the keyfob-communicator displays information about the time remaining until the end of engine operation in automatic mode. Engine run time is programmable and can be 15/25/45/5 minutes (programmable function 2-4). To start driving. You need to open the door, insert the ignition key into the lock and turn it to the "ON" position. To do this, you have 20 seconds, after this time the system will transfer control to the ignition switch, if you do not turn on the ignition, the engine will be stopped.

If the launch did not occur the first time, the system will try again. The system makes no more than three attempts to start, after which it goes into standby mode. If the car engine does not start after the last attempt, contact a service station to diagnose your car.

At the time of launch:

The system will not start the engine if:

Ignition on
The car engine is already running
Door or hood/trunk open
Backup mode failed for vehicles with manual transmission

On successful launch:

Note: If the car's engine is started automatically, the current time indicator shows the time remaining until the engine is stopped. Time is displayed in countdown mode. Time display format in this mode: [ XX min: XX sec.]

When the engine stops automatically:

Trunk opening [Button (III)-]

Press and hold for 2 sec. key fob button III, after which the trunk will open. If the system is armed (doors locked), it will disarm, the doors will unlock, and the starter will be disabled. To implement this function, it is necessary to have a trunk lock solenoid connected to the corresponding output of the main unit of the system.

When opening the trunk:

Checking System Status [Button (IV)]

If you need to check the status of the system, briefly press the button IV of the keyfob-communicator. Information about the state of the system will be shown on the keyfob-communicator display, as well as confirmed by siren and alarm signals.

When checking system status:

When checking the status of the Sherkhan 5 system, the current time indicator shows the temperature in the car. The temperature can be displayed in either °F or °C.

The temperature inside the car is 10°C.

Repeated short pressing of the button IV of the keyfob-communicator within 6 seconds after the first one allows you to view information about the car battery voltage in volts.

The voltage on the car battery is 13.9V.

Panic or JackStop mode (anti-seizure) [Button (IV)-]

When you press the button IV of the key fob for 2 seconds. The system will enter the "Panic" mode or JackStop mode (protection against seizure) - programmable function 1-4.. If the system was disarmed, it will arm itself, the door locks will be locked. The siren will sound for 90 seconds, the alarm will flash for 90 seconds. The "Panic" mode stops the automatic engine start mode. After 90 sec. the system will go into armed mode until it is disarmed by the key fob or emergency shutdown mode. Panic mode can be stopped by briefly pressing the I button. Panic and JackStop modes are used in case of danger or when it is necessary to draw attention to the car.

When activating the "Panic" and JackStop modes:

Differences in the "Panic" and JackStop algorithms (depending on the selected value of the programmable function 1-4):

ATTENTION!

JackStop mode should only be used in emergency situations. It is not a regular constantly used CCTTC mode. it provides for stopping the engine while driving.

When choosing one or another mode, consult with a specialist.

Siren Silence [Button (I+II)]

By briefly simultaneously pressing the buttons I + II of the key fob, you can turn on or turn off the siren signals. In this case, the key fob signals and alarm signals will work as usual. The siren activation is indicated by the presence of a symbol on the key fob display.

When the siren is turned on:

When turning off the siren signals:

VALET Mode [Button (I+III)] Sherkhan 5

To disable security functions system and when transferring the machine to a service station for service, you can use the VALET mode. To do this, briefly press the buttons I + III of the key fob.

In VALET mode, you can control the locking and unlocking of the door locks. To lock or unlock the locks, briefly press button I.

The VALET mode is shown on the display with the symbol

To exit the VALET mode, briefly press the buttons I + III of the key fob

When VALET mode is enabled:

When turning off VALET mode:

Disabling the two-level shock sensor [Button (I + III)] Sherkhan 5

You can disable the two-level shock sensor. Simultaneously press and hold for 2 seconds. buttons I + III of the keyfob, as a result, the sensors will be turned on or off. The indication of the sensor disconnection is the symbol on the key fob display. Switching off the sensor is necessary if you leave the car where false alarms are possible (the car is parked near tram tracks, a child or an animal remains in the car).

When the shock sensor is disabled:

When the shock sensor is turned on:

The shock sensor is called two-level, because it has two levels of response from the impact on the car.

In case of a weak impact, the system warns with 4 short siren sounds and 4 alarm flashes. Key fob - communicator gives a short tone signal, the symbol of impact on the car flashes on the display. If the impact is strong, the system goes into alarm mode for 30 seconds.

Central locking control for turning the ignition on and off [Button (I+IV)]

By briefly simultaneously pressing the buttons I + IV of the key fob, you can turn on or off automatic control central locking (CL) for turning the ignition on and off. If the function is enabled, the door locks will be automatically locked after 30 seconds. after the engine is started and all doors, the hood/trunk will be closed. The locks are unlocked immediately when the ignition is switched off. The function activation is indicated by the presence of a symbol on the key fob display.

When the central locking control function from ignition is turned on:

When the central locking control function is turned off from the ignition:

Passive Arming [Button (II+III)] Sherkhan 5

The passive arming function can be turned on/off by briefly pressing the P+S buttons on the key fob. When passive arming is enabled, the system will automatically arm itself after 30 seconds. after closing the last door or after disarming with the key fob. The system warns of passive arming with alarms and (or) siren every 10 seconds. If within 30 sec. doors (hood/trunk) were opened, the system will arm itself in 30 seconds. after closing the doors (hood/trunk).

When passive arming is enabled:

When turning off passive arming:

Setting the timer for automatic engine start [Button (II+IV)]

Briefly press the buttons II + IV of the key fob to turn the engine start on or off by timer. The indication of the inclusion of starting the engine by timer is the presence of the label "TIMER" on the key fob display. The system provides two modes of starting the engine by timer. The first mode allows you to start the engine every day in advance set time, the second mode allows you to start the engine periodically, every 2 hours to warm up (or cool the interior in countries with a hot climate). Two modes cannot be used at the same time, the mode you need can be selected by programmable function 2-3 .

To automatically start the engine on a timer in right time(24h) you need to make a reservation for this mode. For this:

Select start time (see table)
Press the buttons II + IV and turn off the label "TIMER"

Execution steps	Button number or combination of buttons	Press duration	Executed function (mode)
STEP 1	(II+III)-	2 sec.	Entering the keyfob function programming mode. The appearance of a symbol is confirmed by a sound signal from the key fob
STEP 2	II	0.5 sec.	Turn on the timer setting mode. The readings of the previously set time flash, confirmed by the beep of the key fob
SHAGZ	I	0.5 sec.	Changing the value of the clock
SHAGZ	II	0.5 sec.	Changing the minutes
STEP 4	(II+III)-	2 sec.	Exit from the programming mode of the key fob functions. Confirmed by a beep from the key fob

In order to enable or disable the engine start by timer every 2 hours, briefly press the buttons II + IV of the key fob. Setting the start time in this mode is not required, the first engine start will occur 2 hours after the mode is turned on.

When the timer engine start is enabled:

When turning off the engine start by timer:

Note: Automatic start of the engine on a timer every 24 hours is useful for starting the engine daily in certain time if your car is parked outside the range of the key fob.

ATTENTION!

The engine start time according to the 24 hour timer can be shifted up to ±2 minutes per day.

TURBO Mode [Button (II+IV)]

If the car has a Turbo - engine, then after long work at high speeds it is not recommended to stop it immediately. The engine should idle for some time to cool the turbine. For this, the SCHER-KHAN MAGICAR V system has a TURBO mode (turbo timer). If the TURBO mode is on, then at the end of the trip the engine will run for 2 minutes. To enable or disable the TURBO mode, briefly press the buttons III + IV of the key fob.

When TURBO mode is enabled:

When turning off the TURBO mode:

To activate the mode at the end of the trip, do the following:

Put the gear lever in neutral or "P" position.
Turn the ignition key from the ON position to the OFF position. The engine will continue to run after this for another 2 minutes.
Get out of the car, close the doors. As soon as the doors are closed, the alarm will flash

Now you can arm the system. The engine will then run until the expiration of 2 minutes. interval. When the car is armed, the door, hood/trunk sensors, the driver call sensor are immediately armed, and the shock sensor will start working after the engine stops. The engine will be immediately stopped when the door, hood/trunk sensor is triggered, and the system will go into alarm mode. If necessary, you can urgently stop the engine by pressing for 2 seconds. key fob button II.

Auxiliary channel 1 control [Button (II)]

If your car is equipped with an electromechanical hood lock, an additional preheater or other service equipment, you can control the operation of these devices using a key fob. To do this, briefly press button II on the key fob. A short or long signal will appear at the output of additional channel 1 of the processor unit (programmable function 2-5). The siren and parking lights signals will differ when controlling an additional channel, depending on the state of the programmable function 2-5. If a channel is programmed for a long tone (Programmable Function Value 4 2-5), the system will confirm its activation and deactivation with siren and alarm signals. If a short signal is programmed at the output of an additional channel, the system will only confirm the inclusion of the channel. The additional channel does not work in the VALET mode and in the alarm mode.

Turning on an additional channel:

Note: If a short signal is programmed at the output of an additional channel, the system will only confirm the inclusion of the channel (programmable function 2-5)

Auxiliary channel 2 control [Button (III)]

If your car is equipped with an electromechanical hood lock, an additional preheater or other service equipment, you can control the operation of these devices using a key fob. To do this, briefly press button III on the key fob. A short or long signal will appear at the output of additional channel 2 of the processor unit (programmable function 2-6). The siren and parking lights signals will differ when controlling an additional channel, depending on the state of the programmable function 2-6. If a channel is programmed for a long tone (Programmable Function Value 4 2-6), the system will confirm its activation and deactivation with siren and alarm signals. If a short signal is programmed at the output of an additional channel, the system will only confirm the inclusion of the channel. The additional channel does not work in the VALET mode and in the alarm mode.

Inclusion of an additional channel: Sherkhan 5

Turning off the additional channel:

Note: If a short signal is programmed at the output of an additional channel, the system will only confirm the inclusion of the channel (programmable function 2-6)

Alarm mode

If the door, hood/trunk is opened in armed mode, the system will go into alarm mode for 30 seconds, alarms and sirens will last 30 seconds. At the end of 30 sec. the system will return to armed mode. If the shock sensor alarm zone is triggered (strong impact), the system will go into alarm mode for 15 seconds, the alarm and siren signals will last 15 seconds. At the end of 15 sec. the system will return to armed mode. When the warning zone of the shock sensor is triggered (weak impact), the system will not go into alarm mode, but will only issue a series of four short signals by the siren and alarm. You can stop the alarm mode by short pressing the keyfob button I. The locks will not be unlocked, and the system will switch from alarm mode to armed mode.

In alarm mode:

Reminder mode

If the communicator keyfob received an alarm signal from the door, hood/trunk, shock sensor, call sensor and you did not notice it immediately, then the keyfob, after transmitting the alarm signal, goes into reminder mode (short beeps and indication of the zone that caused the alarm mode) . To stop the reminder mode and check the state of the car, briefly press the button IV of the key fob or button I to exit the security mode and unlock the door locks.

In reminder mode:

Note: Keyfob communicator does not go into reminder mode when receiving a warning signal from a shock sensor (weak impact)

Car Owner Call

If you need to call the owner of the car, tap with a hard object (coin, keys, etc.) near the call sensor. The call sensor LED will flash in green. The function of calling the owner of the car is available immediately after arming. To stop the signals of the keyfob-communicator, press the button I of the keyfob. To stop the signals from the keyfob-communicator and check the condition of the car, briefly press the IV button.

When calling the car owner:

Access to the car without a key fob Sherkhan 5

Access to a car without a key fob may be required in a number of cases. For example, if the key fob is lost, if the battery in the key fob is dead, if you are relaxing on the beach and do not want to take the key fob with you (the key fob and keys are closed in the car). The SCHER-KHAN MAGICAR V system provides such an opportunity. To ensure that only you are allowed access, the system uses a personal code consisting of four digits. The value of each digit of the code can vary from 1 to 9. Thus, the code can have a value from 1111 to 9999. The code is entered and recorded through the call sensor of the car owner.

Recording a personal code:

In order for you to use this function, you must enter your code into the system memory. To do this, follow several steps:

Turn on the ignition
open the door
While the LED is flashing, tap the call sensor the number of times corresponding to the first digit of the code. After 1.5 sec. the LED will confirm the selected number with red flashes and start flashing again.
While the LED is flashing, tap the call sensor the number of times corresponding to the second digit of the code. After 1.5 sec. the LED will confirm the selected number with red flashes and start flashing again.
While the LED is flashing, tap the call sensor the number of times corresponding to the third digit of the code. After 1.5 sec. the LED will confirm the selected number with red flashes and start flashing again.
While the LED is flashing, tap the call sensor the number of times corresponding to the fourth digit of the code. After 1.5 sec. The LED will confirm the selected number with red flashes.
You will hear one siren tone to confirm that the code has been programmed, and the alarm will flash once.

If you made a mistake on any of the steps, then you need to record the code, starting from point 1.

Entering a personal code:

Tap the call sensor 10 times. Each time the LED in the sensor will flash green. The time between blows must be less than 1.5 seconds.
The LED will quickly flash red to confirm that the previous step has been completed. If the LED does not flash red, then start from step 1 again.
While the LED is flashing, tap the call sensor the number of times corresponding to the first digit of the code. After 1.5 sec. the LED will confirm the entry of the first digit with red flashes and start flashing again.
While the LED is flashing, tap the call sensor the number of times corresponding to the second digit of the code. After 1.5 sec. the LED will confirm the entry of the second digit with red flashes and start flashing again.
While the LED is flashing, tap the call sensor the number of times corresponding to the third digit of the code. After 1.5 sec. the LED will confirm the entry of the third digit with red flashes and start flashing again.
While the LED is flashing, tap the call sensor the number of times corresponding to the fourth digit of the code. After 1.5 sec. the LED will confirm the entry of the fourth digit with red flashes.
If the code is entered correctly, the system will disarm, the door locks will open, and the key fob-communicator will receive a signal to disarm the system. If the code is entered incorrectly, then the key fob will receive a call signal from the owner, and it will be necessary to repeat all the steps starting from step 1.

The system allows five attempts to enter the code within 30 minutes. If the code was entered incorrectly, then its entry is blocked for 24 hours or until you disarm the system using the key fob.

Battery protection (out-of-dimension warning)

The system helps protect the car's battery from being discharged. If you forgot to turn off the parking lights, then when arming, the key fob-communicator will give a series of beeps for 5 seconds. At this time, the images of the lock and side lights will flash on the display. The warning tone will repeat every 30 seconds. three times.

Starter or ignition lock

The system in armed mode will not allow you to start the car engine. When you try to start the engine in armed mode, the system will send an alarm signal to the key fob communicator. An alarm about turning on the ignition will be displayed by flashing side lights on the key fob communicator, sound and vibration signal. The engine blocking operation mode is selected when the system is installed at a service station and depends on the values of two programmable functions 1-4 and 1-8. You can find out more about blocking the engine of your car at the place where the system is installed. When the starter interlock is selected, the system will prevent the vehicle's starter from restarting if the engine is started in automatic mode.

Open door warning

The system warns of an open door (programmable function 1-2). When a custom function value is selected, the alarm flashes if the car door is open.

Protection of the radio channel from code interception

The system has special protection for the commands transmitted by the key fob. Each time you press a button on the system's key fob, the code message changes according to a special algorithm. This is done to protect the system from interception of the code and its selection (intelligent hacking of the security system). The code protection algorithm is specially designed for the SCHER-KHAN MAGICAR system and is unique, not applicable in one security system of other brands.

Motor protection in automatic start mode

The system in automatic start mode constantly monitors the operation of the engine. If the engine stops before the end of the warm-up cycle (engine failure or out of fuel), then no later than 20 seconds. the processor unit of the system will turn off the ignition. Repeated automatic start of the engine will not be possible until the malfunction is eliminated. For vehicles with a manual transmission, you must perform the backup mode again.

Shock sensor sensitivity adjustment

You can adjust the sensitivity of the shock sensor depending on your requirements. A regulator is provided to adjust the sensitivity of the sensor. Turning the knob clockwise increases the sensitivity, and counterclockwise decreases it until the sensor turns off. Consult a service station about the location of the shock sensor, it must be easily accessible for adjustment.

Adjusting the sensitivity of the owner's call sensor

You can adjust the sensitivity of the car owner's call sensor depending on your requirements. To adjust the sensitivity on the sensor, a step regulator with three positions is provided. The extreme left position of the regulator corresponds to the minimum sensitivity of the sensor, the extreme right - to the maximum. The sensor should be located in the lower corner of the car's windshield.

Adjusting the volume of siren confirmation signals

You can adjust the volume of the siren's short beeps. To reduce the volume, you need to cut the loop from the wire on the siren's body. The system can be equipped with any siren according to the wishes of the owner, including those where there is no possibility of adjustment.

Backup mode (only for manual transmission)

The standby mode excludes the possibility of automatic starting of the engine if the manual transmission lever is not set to the neutral position. Depending on your requirements, you can choose one of three redundancy algorithms (programmable function 1-6).

Algorithm 1

Algorithm 2

To perform a backup (prepare the vehicle for the subsequent automatic start of the engine), do the following:

At the end of the trip, without turning off the engine, place the gear lever in neutral position
Close the hood/trunk doors
Remove the key from the ignition switch (in the OFF position). The engine will keep running
Open the door and get out of the car. Close the door. The engine will stall.

Opening the door after completing the fifth step will make it impossible to automatically start the engine. Diagnosis of the reasons for its failure is described below.

If at least one step from the above algorithm is not performed, then there will be no backup mode and automatic engine start will not occur. In this algorithm, redundancy will be prohibited if the door, hood / trunk are open at the time the ignition is turned off.

Algorithm 3

To perform a backup (prepare the vehicle for the subsequent automatic start of the engine), do the following:

At the end of the trip, without turning off the engine, place the gear lever in neutral position
Close the hood/trunk doors
Press for 2 sec. key fob button II
Remove the key from the ignition switch (in the OFF position). The engine will keep running
Open the door and get out of the car. Close the door. Engine will stall

Opening the door after completing the fifth step will make it impossible to automatically start the engine. Diagnosis of the reasons for its failure is described below.

If at least one step from the above algorithm is not performed, then there will be no backup mode and automatic engine start will not occur. In this algorithm, the implementation of the reservation requires you to each time press button II of the key fob before turning off the ignition (by turning the key in the ignition switch to the OFF position).

ATTENTION!

Close the sunroof and windows before leaving the vehicle. Do not leave people or animals in the vehicle when the reservation mode is being executed.

Do not start the engine automatically if there are people or animals in the car.

Leave the gear lever always in the neutral position. Do not use automatic engine start on open top vehicles.

If the operation of the redundancy mode differs from the described algorithms or does not occur, urgently contact a service station for advice. Until the cause is removed incorrect operation do not use automatic engine start.

PROGRAMMING NEW KEYFOBS

The system can remember the codes of three key fobs. To program new key fobs, follow two steps.

Turn the ignition key three times from OFF to ON. The alarm will flash once to confirm entry into programming mode.
Not later than 4 sec. after the alarm flashes, press button I of the key fob, the code of which must be entered into the memory of the processor unit.

To exit the programming mode, do not take any action for 4 seconds. after writing the code of the last key fob.

If no action is taken after step 1, then after 4 seconds. the alarm will flash 2 times, the system will switch from the key fob programming mode to the VALET mode.

Note:

The system has three memory cells for storing key fob codes. When you try to write the fourth key fob, the code of the first recorded key fob will be deleted.

PROGRAMMING FUNCTIONS USING THE KEYFOB

Programming the CTCTS functions using a key fob consists of four steps.

Entering the programming mode and selecting the programming menu. To enter Menu No. 1, press the I + II buttons simultaneously for 2 seconds. To enter Menu No. 2, press the I + IV buttons simultaneously for 2 seconds. The siren will sound one short beep and the alarm will flash once, confirming the successful completion of STEP 1.
Press the IV button to select the Menu function you want to change. The number of presses must correspond to the number of the selected function. For example, to select function 4, you need to briefly press the keyfob button IV four times. Each button press will be confirmed by a short siren tone (if enabled) and an alarm flash.
Wait a few seconds. The system will confirm the number of the selected function to be changed with short siren sounds and alarm flashes. The number of signals will correspond to the number of the selected function.
Note:

If, when choosing a function, you made a mistake with the number of clicks and (or) there are no siren and alarm signals, then you need to repeat all the actions starting from STEP 1.
Press the I button to select the factory setting for the function. To confirm this, the siren will give one short signal, the alarm will flash once. Press the II, III, or IV button to select optional function values. To confirm this, the siren will give two, three or four short beeps, the alarm will flash two, three or four times.

Note:

If you hear one long siren signal, this means the system has exited the function programming mode. To continue programming, repeat all steps from STEP 1.

ATTENTION!

If you need to change more than one function from the Menu you have selected, then the selection of each function to change must begin with STEP 1.

Menu of programmable functions

Menu #1 [Button (I+II)-]

No. p / p.	Function	[Button (I)] Factory setting	[Button (II)]	[Button (III)]
1-1	Delay before the starter rotates after the ignition is turned on. Should be increased for a diesel vehicle.	4 sec.	10 sec.
1-2	Open door warning	Not	There is
1-3	The duration of the control pulse of the central lock. Should be increased for pneumatic central locking system	0.8 sec.	4 sec.
1-4	"Panic" or JackStop mode (protection against robbery)	"Panic" (Starter lockout)	JackStop (ignition lock)
1-5	Central locking control for turning the ignition on and off	Turned off	Turned off
1-6	Launch reservation method. (Only for manual transmission)	Automatically, every time the ignition is turned off	Automatically, whenever the ignition is turned off, but provided that the doors are closed	Only manual mode, before switching off the ignition for reservation, it is necessary to press button II for 2 seconds.
1-7	Starter rotation time	Standard	Standard + Minimum	Standard + maximum

Note on function 1-4: This function allows you to select the "Panic" mode or JackStop mode (protection against robbery):

Resetting all programmable functions of Menu No. 1 to factory defaults

Entering programming mode. Press buttons I+II simultaneously for 2 sec. The siren will sound one short beep and the alarm will flash once, confirming the success of STEP 1
Briefly press button III on the key fob three times. Each press will be confirmed by a short siren tone and an alarm flash. After some time, three siren sounds will sound, the alarm will flash three times, confirming the factory settings of all menu 1 programmable functions.

Menu #2 [Button (I+IV)-]

Setting all programmable functions of menu No. 2 to factory values Sherkhan 5

To reset the programmable features to factory defaults, two steps are required.

Entering programming mode. Press buttons I+IV simultaneously for 2 sec. The siren will sound one short beep and the alarm will flash once, confirming the success of STEP 1
Briefly press button III on the key fob three times. Each press will be confirmed by a short siren tone and an alarm flash. After some time after this, three siren sounds will sound, the alarm will flash three times, confirming the factory settings of all programmable menu #2 functions.

When opening the trunk:

Checking System Status [Button (IV)]

When checking the status of the SCHER - KHAN V car alarm system:

When checking the status of the car security system, the current time indicator shows the temperature value in the car interior. The temperature can be displayed in either °F or °C.

The temperature inside the car is 10°C.

Repeated short pressing of the button IV of the keyfob-communicator within 6 seconds after the first one allows you to view information about the car battery voltage in volts.

The voltage on the car battery is 13.9V.

Panic Mode or JackStop™ (anti-grab) [Button (IV)-]

When you press the button IV of the key fob for 2 seconds. The car alarm system will enter Panic or JackStop ™ (anti-trap) mode - programmable function 1-4 .. If the system has been disarmed, it will arm, the door locks will be locked. The siren will sound for 90 seconds, the alarm will flash for 90 seconds. The "Panic" mode stops the automatic engine start mode. After 90 sec. the car security system SCHER - KHAN V will switch to the armed mode until it is disarmed by the key fob or emergency shutdown mode. Panic mode can be stopped with a short press of the I button. Panic and JackStop™ modes are used in case of danger or when it is necessary to draw attention to the vehicle.

When activating Panic and JackStop™ modes:

Differences in the "Panic" and JackStop ™ algorithms (depending on the selected value of the programmable function 1-4):

.
	IV button for 2 sec.	IV button for 2 sec.
	Siren sounds 1.5 min.	Siren sounds 1.5 min.
Engine lock type	Starter lock	Ignition lock (lock is disabled during automatic start)
Starter lock	Turns on immediately	Not used
Ignition lock	Not used	Turns on immediately if the ignition is off. Turns on after 30 sec. after 2 sec. pressing the IV button if the ignition is on

ATTENTION!

The JackStop™ mode can only be used in an emergency. It is not a regular constantly used STSTS mode, because. it provides for stopping the engine while driving. When choosing one or another mode of the SCHER - KHAN V car alarm, consult with a specialist.

Siren Silence [Button (1+11)]

By briefly simultaneously pressing the buttons I + II of the key fob, you can turn on or turn off the siren signals. In this case, the key fob signals and alarm signals will work as usual. The presence of the symbol serves as an indication of the inclusion of the siren. on the key fob display.

When the siren is turned on:

When turning off the siren signals:

VALET mode [Button (I+III)]

To disable the security functions of the system SCHER car alarms- KHAN 5 and when transferring the machine to a service station for maintenance, you can use the VALET mode. To do this, briefly press the buttons I + III of the key fob.

In VALET mode, you can control the locking and unlocking of the door locks. To lock or unlock the locks, briefly press button I.

The VALET mode is shown on the display with the symbol

To exit the VALET mode, briefly press the buttons I + III of the key fob

When VALET mode is enabled:

When turning off VALET mode:

Disabling the two-level shock sensor [Button (I+III)]

You can turn off the two-level shock sensor of the SCHER - KHAN 5 car security system. Press and hold for 2 seconds at the same time. buttons 1+ III of the key fob, as a result, the sensors will be turned on or off. The indication of the sensor disconnection is the symbol on the key fob display. Switching off the sensor is necessary if you leave the car where false alarms are possible (the car is parked near tram tracks, a child or an animal remains in the car).

When the shock sensor is disabled:

When you turn on the shock sensor car alarm SCHER - KHAN 5:

The shock sensor is called two-level, because it has two levels of response from the impact on the car.

In case of a weak impact, the car security system warns with 4 short siren sounds and 4 alarm flashes. Key fob - communicator gives a short tone signal, the symbol of impact on the car flashes on the display. If the impact is strong, the system goes into alarm mode for 30 seconds.

Central locking control for turning the ignition on and off [Button (I+IV)]

By briefly simultaneously pressing the buttons I + IV of the key fob, you can turn on or turn off the automatic control of the central lock (CL) by turning the ignition on and off. If the function is enabled, the door locks will be automatically locked after 30 seconds. after the engine is started and all doors, the hood/trunk will be closed. The locks are unlocked immediately when the ignition is switched off. The function activation is indicated by the presence of a symbol on the key fob display.

When the central locking control function from ignition is turned on:

When the central locking control function is turned off from the ignition:

Passive arming [Button (II+III)]

The passive arming function can be turned on/off by briefly pressing the buttons II+III of the key fob. When passive arming is enabled, the car security system will automatically arm itself after 30 seconds. after closing the last door or after disarming with the key fob. The system warns of passive arming with alarms and (or) siren every 10 seconds. If within 30 sec. doors (hood/trunk) were opened, the system will arm itself in 30 seconds. after closing the doors (hood/trunk).

When passive arming is enabled:

When turning off passive arming:

Setting the timer to automatically start the car engine [Button (II + IV)]

Briefly press buttons II + IV of the key fob to turn the engine start on or off by timer. The presence of the label "TIMER" serves as an indication of the inclusion of starting the engine by timer; on the key fob display. The system provides two modes of starting the engine by timer. The first mode allows you to start the engine every day at a predetermined time, the second mode allows you to start the engine periodically, every 2 hours to warm up (or cool the interior in countries with a hot climate). Two modes cannot be used at the same time, the mode you need can be selected by programmable function 2-3.

To automatically start the engine by timer at the right time (24 hours), it is necessary to make a reservation for this mode. For this:

1. Press the buttons II + IV and turn off the label - TIMER

2. Select start time (table)

3. Press the buttons II + IV and turn off the label - TIMER

Execution steps	Button number or combination of buttons	Press duration	Executed function (mode)
			Entering the keyfob function programming mode. The appearance of a symbol is confirmed by a sound signal from the key fob
			Turn on the timer setting mode. The readings of the previously set time flash, confirmed by the beep of the key fob
			Changing the value of the clock
			Changing the minutes
			Exit from the programming mode of the key fob functions. Confirmed by a beep from the key fob

In order to enable or disable the engine start by timer every 2 hours, briefly press the buttons II + IV of the car alarm key fob. Setting the start time in this mode is not required, the first engine start will occur 2 hours after the mode is turned on.

When the timer engine start is enabled:

When turning off the engine start by timer:

Note: Automatic engine start by timer every 24 hours is useful for starting the engine every day at a certain time if your car is parked outside the range of the car alarm key fob.

ATTENTION!

The start time of the car engine according to the 24 hour timer can be shifted up to ± 2 minutes per day.

TURBO mode [Button (II + IV)]

If the car has a Turbo-engine, then after a long operation at high speeds it is not recommended to stop it immediately. The engine should idle for some time to cool the turbine. To do this, the SCHER - KHAN MAGICAR V system provides a TURBO mode (turbo timer). If the TURBO mode is on, then at the end of the trip the engine will run for 2 minutes. To enable or disable the TURBO mode, briefly press the buttons III + IV of the key fob.

When TURBO mode is enabled:

When turning off the TURBO mode:

To activate the mode at the end of the trip, do the following:

1. Put the gear lever in neutral or "P" position.

2. Turn the key in the ignition lock from the ON position to the OFF position. The car engine will continue to run after this for another 2 minutes.

3. Get out of the car, close the doors. As soon as the doors are closed, the alarm will flash.

Now you can put the car alarm system into car security mode. The engine will then run until the expiration of 2 minutes. interval. When the car is armed, the door, hood/trunk sensors, the driver call sensor are immediately armed, and the shock sensor will start working after the engine stops. The engine will be immediately stopped when the door, hood/trunk sensor is triggered, and the system will go into alarm mode. If necessary, you can urgently stop the engine by pressing for 2 seconds. key fob button II.

AT recent times various anti-theft systems are in great demand in the market. One of the most popular systems is the alarm system, which has an optimal ratio of functionality and cost. If you are looking for a really good gadget of this type, then great option will become "Sherkhan Magikar 5".

This device has excellent functionality, and also works reliably and stably. Thanks to the instructions, you can easily learn about the capabilities of this model, as well as learn all the features of operation.

You can easily use Sherkhan Magikar 5 from a distance, because you have a special key fob that is responsible for communication between the user and the security system. The device can work at a distance of up to 1.5 kilometers. The key fob is also equipped with a high-quality liquid crystal display, which makes it easy to read information.

With "Sherkhan Magicar 5" you will be able to activate the motor only on command, which is given by the user through the key fob to the internal timer of the device. When the engine is activated, the temperature in the cabin, the state of the battery and other parameters are neglected.

Device advantages

An important advantage is the versatility of the Sherkhan Magikar 5 alarm, because you can easily install it on cars with any type of gearbox, with engines running on any fuel. The main thing that onboard network was able to generate a voltage of 12 V.

Users like the work of "Sherkhan Magikar 5" due to the fact that this device is really functional. With this device, you can protect a variety of parts of the car. In addition, manufacturers have done a good job of protecting the processor unit, antenna, and all kinds of sensors. They fully comply international standard IP40. All parts of the alarm are mounted directly in your car, while installation does not require much effort and time.

The IP-65 siren, which is equipped with Sherkhan Magikar 5, also works just fine: the signal is powerful, it works in a timely manner. In order for the sound signal to work as correctly as possible, the siren is mounted in the engine compartment of the car. At the same time, you need to make sure that there was no exhaust manifold or high-voltage systems near it.

How to get started

It is worth noting that when buying Sherkhan Magikar 5, there is no battery in the device, since it was placed separately for the most convenient transportation. Thus, the charge will not be consumed even before you begin to use the alarm. For normal operation the battery must be inserted into the correct compartment. To do this, you should remove the fixing plate, which holds the cover of the battery part of the device in a certain position, and then move the compartment cover itself in the direction opposite to the antenna.

Now you can install the battery in its proper place. At the same time, it is important to ensure that the polarity is chosen correctly (it is easy to verify this using graphic indicators). If in doubt, simply install the battery with the negative pole towards the antenna. As soon as the battery is in its place, Sherkhan Magikar 5 will notify you with a sound melody. Now you just have to close the lid and install the latch.

Already during the battery installation procedure, you can make sure that the Sherkhan Magikar 5 is made really high quality, because even to the touch the materials are durable and reliable.

Guard mode

In order to turn on the security mode, you must first turn off the engine and close all doors and trunk of the car. So, you should press the "1" button on the remote control. Immediately after that, the security device itself activates the security mode on all elements of the car: the starter will be blocked until you remove the blocking yourself, and the door locks will also be blocked.

To make sure that "Sherkhan Magikar 5" has successfully switched to armed mode, the system should show you a number of signals:

One-time operation of the siren;
Single operation of an emergency light signal;
The LED indicator will start flashing, the flickering frequency will be 1 time per second;
Synchronized five-fold blinking of headlights;
Single short signal from the key fob itself.

Sensor operation

If the indicator light flashes, this means that the security system monitors the doors, trunk and other parts of the car through which it can be entered. "Sherkhan Magicar 5" additionally checks all sensors and continuously monitors them, while the motorist can relax, because his car is in good hands!

The device allows you to connect the function of controlling the delay of lighting in the cabin. If it is activated, trigger control will also be performed. Half a minute after the car was put into the armed mode, the shock sensor will start its work.

Warning signals

It is important for the motorist to be vigilant and attentive to the car. For example, in no case should you leave the doors, trunk or hood open. "Sherkhan Magicar 5" will signal you about your inattention with a siren, a three-time alarm and a three-time signal on the key fob.

To make it easier for you to find the part of the car that you have left open, its image will be highlighted on the display. True, it is displayed on the screen only for 5 seconds, after which it will be replaced by the inscription "FALL", which also indicates the carelessness of the motorist.

If you have activated any sensor, then, unlike other communications of the device, it will not be closed, the security system will allow it to work until the user deactivates it.

Passive Arming

So that you do not forget to arm the device, Sherkhan Magicar 5 can do this automatically. To do this, you just need to change the activation parameter of this function. When automatically arming, it will be activated half a minute after you closed the last door on your car. At the same time, the key fob will constantly signal you that it will turn on after a specified time. security mode. If in 30 seconds you open one of the doors, then the countdown will start again. The activation of passive protection is indicated by the inscription “Passive” on the key fob screen.

Alarm mode

"Sherkhan Magicar 5" works without any interruptions and errors, therefore, when the door is opened, the alarm mode is automatically activated, which lasts exactly 30 seconds, and if the cause of the alarm is eliminated, the security system will return to standard mode. If the cause is not corrected, then you will have 8 more cycles of 30 minutes to do this. If even after 4 minutes you could not eliminate the disturbing factor, the security system will automatically switch to armed mode.

Features of signal triggering

In the event that a strong physical impact was made on the machine, and the shock sensor is triggered, it will work for 5 seconds in alarm mode with a strong sound signal and alarm operation. If the physical impact was weak, then the motorist will hear 4 short beeps. So you will always know when someone touched your car or tried to get into it!

Backup mode (only for manual transmission)

Algorithm 2

To perform a backup (prepare the vehicle for the subsequent automatic start of the engine), do the following:
At the end of the trip, without turning off the engine, place the gear lever in neutral position
Remove the key from the ignition switch (in the OFF position). The engine will keep running
Open the door and get out of the car. Close the door. The engine will stall.

Opening the door after completing the fifth step will make it impossible to automatically start the engine. Diagnosis of the reasons for its failure is described below.

To perform a backup (prepare the vehicle for the subsequent automatic start of the engine), do the following:
At the end of the trip, without turning off the engine, place the gear lever in neutral position
Close the hood/trunk doors
Press for 2 sec. key fob button II
Remove the key from the ignition switch (in the OFF position). The engine will keep running
Open the door and get out of the car. Close the door. Engine will stall

Opening the door after completing the fifth step will make it impossible to automatically start the engine. Diagnosis of the reasons for its failure is described below.