Enjoy the benefits of civilization, including hot water, everyone wants it. However, it is not available to everyone. But there is convenient solution problem, which is expressed in the use of After visiting the store, you will be able to note that the choice of this equipment so huge that making an acquisition can be quite difficult. The water heater must meet the conditions and provide the house with hot water on time.

It is necessary to think about the tasks that will be assigned to it. An important parameter is not only power, but also the availability automatic system, additional features and the ability to remove combustion products. You must pay attention to safety, type of ignition, as well as appearance devices. You need to think about which manufacturer to choose. For example, the Mora gas water heater is very popular today. It is available for sale in several models, one of which you can choose for yourself.

Reviews of the Mora VEGA speaker

If you decide to choose this flow heater, you will be able to use a completely innovative product from the company. Thanks to its compact dimensions, exceptional technical specifications And modern design, the mentioned water heater is superior to many similar products on the market.

Users claim that servicing the device is quite simple, it works in offline mode, has a high coefficient useful action, which reaches 92% and also saves fuel up to 10%. This geyser "Mora" is in an economical way heating water. Thanks to modern functionality, you can set and maintain the temperature at a certain level.

Reviews about the comfort and efficiency of the Mora VEGA model

If you choose the above-mentioned Mora gas water heater, you will be pleased with its efficiency. According to users, the unit has combined fittings, which are supplied German company. Thanks to this, the equipment turns on at a water flow of 2 liters per minute.

The fittings have the function of automatically maintaining the set temperature; this is very important if the water pressure drops in the water supply system are quite frequent. We can’t help but mention the cost-effectiveness. The highly efficient and compact heat exchanger heats the flowing water 15% faster compared to other columns.

Reviews of the reliability of Mora VEGA

Geyser"Mora Vega" is reliable equipment, which is guaranteed by a number of constructive solutions. It is worth recognizing that other manufacturers also use fittings whose design is similar to that used in the manufacturing process of the equipment described. However, in the case of Mertik brand fittings, the moving parts do not come into contact with water, which eliminates the leakage of liquid in tight joints. In other devices, such a problem requires replacing the entire unit.

According to buyers, the heat exchanger tubes have a special turbulator that eliminates scale deposits. This ensures not only rapid heating of water, but also extends the life of individual components. If you read customer reviews, you will be able to understand that the heat exchanger is made of 18 mm tubes, which prevent the deposition of salts and cool the walls without overheating the equipment casing.

Reviews about the safety and performance of the Mora VEGA model

The Mora gas water heater, according to buyers, is safe and well-designed. Overheating of water in the heat exchanger is eliminated due to the presence of a temperature limiter. You don’t have to worry about combustion products being drawn back into the room, since the device has a special fuse that prevents the back penetration of gas if the chimney becomes clogged.

From the reviews you can understand that the flame fuse guarantees correct work pilot and main burners. The equipment prevents the main burner from starting if there is no water in the device. Geyser "Mora", reviews of which may allow you to make right choice, has piezoelectric ignition, which is very convenient to use. The equipment uses natural gas, and combustion products are discharged into a chimney, the gas neck of which may have a minimum diameter.

Reviews of the speaker model MORA-TOP Sirius PK20KK

"Mora Tor" is a geyser that has excellent functionality and unique features. Consumers highlight the power indicator, flame modulation, auto-ignition and thermometer. All this makes operation convenient and simple. Features include the ability to connect external control, the presence of a display, and the connection of a heated floor.

As buyers emphasize, the column is very durable, because the maximum water pressure in the heating circuit can reach 3 bar, while in the hot water supply circuit this figure can be 6 bar. The hot water performance is also very popular among customers. At a temperature of 35 °C this parameter will be 8.4 liters per minute. If the temperature is lowered to 30 °C, in one minute you can get 9.8 liters. At 25 °C, productivity will increase to 11.8 liters per minute.

The Mora Top gas water heater consumes 2.39 m3 per hour natural gas. Nominal pressure natural gas is 13 mbar. Consumers quite often write reviews about this model, after reading which you can find out that the kit includes a built-in expansion tank, the volume of which is 7 liters.

For supplying hot water and heating a private home, the most popular equipment is a gas water heater. It is accessible to almost everyone and does not require high costs. But you need to choose quality equipment. After all, it depends on it comfortable atmosphere in the home and safety. In this article we will consider all the advantages and disadvantages, as well as the features of the Mohr gas water heater.

Gas water heater device

The Mora geyser is a flow-through water heater. It consists of the following elements: gas burner, water-gas fittings, ignition device and heat exchanger. All elements of equipment are hidden in a small and aesthetic case, along with safety and regulation equipment.

With the help gas burner safe combustion of gas is ensured, while heating the water in the heat exchanger. After the water tap is closed, the gas supply stops and the burner goes out. Ignition in a gas water heater can be of two types: electric and piezoelectric. In the first type, electric batteries are used to ignite the spark. And in the piezoelectric method, after pressing the button, the igniter is ignited, and from it, in turn, the burner is ignited.

After opening water tap and pressure changes in heating system Ignition is carried out using an ignition device.

Advantages and Disadvantages

Using a Mora gas water heater, you can provide heating to your home, as well as a supply of hot water. The principle of operation is quite simple: after opening the tap, the burner is ignited using the igniter. And it heats the water in the heat exchanger.

The water is heated as it passes through the heat exchanger pipes and enters the heating and hot water supply system. If you close the tap, the burner goes out and the column stops working. The versatility of the Mora gas water heater ensures continuous heating and hot water supply in the house.

The main advantages of the column are its efficiency and small sizes. More benefits gas appliance can be attributed:

• No noise during operation.
• The heat exchanger will not leak over time. Because it is made of copper.
• High equipment efficiency. Even if water pressure is from 0.2 atm.
• High efficiency. It reaches 94%.
• The design of the burner is well thought out, as is the protection of the igniter from various contaminants.
• Security system.

The downside is the problem of finding parts for older models. Although the Mora gas water heater is cheaper than its analogues, many note its high cost.

Features of the Mora geyser

Mora instantaneous water heaters have unique properties and are in demand modern market. The following features can be distinguished in the water heater:

• Thanks to the design of the heat exchanger, the heating rate is 15% higher than that of other manufacturers;
• German high-quality fittings are used, which includes a column with a flow rate of 2.5 l/min;
• If the water flow changes, the temperature is automatically maintained;
• The flue neck has a diameter of over 115 mm;
• And the diameter of the tubes is 18 mm. There are turbulators inside the tubes that prevent scale from settling;
• Thanks to the heat exchanger, overheating is prevented;
• The operation of the burners is controlled by a flame fuse;
• A dry start fuse is installed. This means that the burner will not light without water;
• Thanks to the fuse reverse thrust harmful substances they get into the room. Therefore, you can install the water heater anywhere.

The cost of Mora geysers does not exceed the cost of analogues that have lower technical characteristics.

Installation

Before installing the geyser, you must select the location where it will be located. The room must be equipped high-quality ventilation, and the walls are made of non-combustible materials. Installing the column is usually not difficult. Let's look at the step-by-step process of installing a Mora gas water heater:

1. First of all, the equipment is attached to the wall.
2. Next, use the standard brackets that are included in the kit.
3. It is necessary to pay attention to the strength of the wall.
4. Next, you can install pipes hot and cold water.
5. Recommended before shut-off valves install inlet pipes.
6. It is also advisable to arrange a gasket made of non-combustible material between the device and the wall.
7. Next, the chimney is connected. The diameter of the pipes must be no less than the diameter of the outlet of the device. The chimney must be made of a material that is not affected by high temperature and combustion products.
8. The last point is the gas connection. It is better to entrust such work to specialists.

What to do if the gas water heater does not ignite

Let's consider various solutions if the column stops lighting. The first step is to check for external damage or leaks. The power cable or device case may be damaged. Next, you should check the cold water pressure and the presence of draft in the ventilation. If the speaker is electric, you can replace the batteries.

If you do not understand the design of geysers, then it is better to seek help from specialists.

If all of the above methods did not help, then you need to follow these steps:

1. It is necessary to clean the membrane and filter from various contaminants. To do this, it is enough to wash these elements under high pressure of water.
2. If you notice any ruptures or deformations in the membrane, it must be replaced. The silicone membrane has a longer service life.
3. If the gas heater starts to light with a popping sound, but then goes out, then it is necessary to clean the ignition filter.
4. Next, the solenoid valve should be replaced.
5. If sparks occur during ignition, but the column does not light up, then it is necessary to clean the ionization sensor electrode.

But do not forget that all procedures can be carried out only after turning off the gas and water. If you have completed all the steps, but the column still does not start to light up, then you should contact a qualified technician.

The Mora water heater can operate on liquefied fuel or natural fuel. The operation of the column can only be disrupted if parts of the device are worn out, there is no draft in the ventilation, or if poor-quality equipment is used. tap water. Minor faults can be corrected yourself.

MORA TOP geysers are assembled in the Czech Republic entirely from European components and meet the best European standards according to environmental standards. Gas instantaneous water heaters MORA TOP They are distinguished by very high reliability and durability, superior to European analogues. Water heaters have several degrees of protection - from insufficient draft, lack of gas, electronic columns - from overheating of the heat exchanger. Only in water heaters with a constantly burning igniter from a Czech company, a thermal relay is installed to detect overheating of the heat exchanger. The device will not work if there is no water in the column. Water heaters are available with a capacity of 10, 13, 16 liters per minute with piezo (constantly burning igniter) and electronic ignition. Gas water heaters MORA have a fairly high efficiency - 92.5%. The main gas-water unit is manufactured in Germany, a well-known supplier of components for gas equipment Mertik Maxitrol.

Discounts and promotions

Our company provides a 100% discount on delivery gas water heaters Mora within the Moscow Ring Road with a complex order of delivery and installation at the same time. After installation by a specialist from our company, we undertake to carry out warranty repairs for 2 years in accordance with the manufacturer’s conditions specified in the warranty card for Mora equipment. Upon advance 100% payment for the ordered Mora gas water heater of any modification, a 5% discount is provided, the price is fixed on the day of payment. After payment, an agreement is concluded for free delivery of equipment within one week within the Moscow Ring Road.

Technical characteristics of gas water heaters (gas water heaters)

After installing the Mora geyser, our company prepares everything necessary documents, which can be provided to the inspection organization. And also, as an authorized Mora service center, we carry out free repairs under the manufacturer’s conditions.

The Czech company Mora Top has been present on the geyser market for many decades. All this time, she is trying to produce impeccable products that satisfy all consumer needs. At the same time, the company does not lag behind the requirements technical progress. Let's consider the most popular models geysers of this trademark, their features, and also give valuable tips on operation.

Vega Max

This modification is designed to replace models 5502, 5505, 370, 371. All four versions were discontinued several years ago, but instead of them, as the previously installed equipment wears out, you can install a new column without changing connecting dimensions. Thanks to this, updating water heaters will be easy and simple. The geyser is mounted on the wall and is capable of developing thermal power 17.3 kW, providing up to 10 liters of heated water in 60 seconds. The design of this model uses:

• German fittings for water and gas Mertik;
• main and pilot burners, Czech-made heat exchanger;
• pipes with a wall of 0.1 cm.

The system automatically maintains the set liquid temperature. There are two options - with piezoelectric ignition and battery-powered. The entire necessary range of safety devices has been installed.

It is impossible to move the gas valve to the open position when the water supply is turned off. Gaseous products will definitely not get out.

Model Vega 10

This is another promising model from the Czech company. Its characteristic advantages are, in addition to its brilliant design, compact dimensions and technological excellence. The thermal generation rating is 17.3 kW, and the spread in the amount of water received (when heated to 25 degrees) is from 5 to 10 liters. The device is able to operate in an automated mode and consume 10% less gas than other products of comparable power. Positive Feedback Buyers are also attracted by efficiency up to 92%, as well as smooth power control.

Combined fittings from Germany are capable of turning on the column even at a pressure of 2.5 liters in 1 minute. Other designs of the same kind do not provide this opportunity. What is important is that the German developers also made sure that the strictly specified temperature was maintained. This allows you to extinguish the negative effect associated with pressure surges. Refusal to operate moving parts in water prevents the disadvantage of most columns - a high risk of leakage at the intersection of water and gas fittings.

Vega 10E

This model is equipped with an ignition powered by 1.5 V batteries. For normal operation 2 batteries must be used. Like other versions in the Vega line, the design attracts attention with its external design and at the same time technical leadership. A protective thermostat is provided to prevent overheating of the liquid inside the heat exchanger. The automation will block the operation of the main burner if there is no water; a high-quality ionization electrode is installed.

Vega 16

This geyser is far superior to all the versions listed above. It develops thermal power up to 26.4 kW, while the minute flow rate warm water ranges from 8 to 15.2 liters. The operation of the device involves the consumption of natural gas. The special design of the fittings ensures that the column starts already when 4 liters of water enters per minute. The heating rate due to the improved heat exchanger is increased by 15% compared to similar designs.

Additional turbulators slow down the deposition of scale particles many times over and speed up the heating of the liquid. The carefully selected diameter of the heat exchanger tubes allows for a balance between slow accumulation of salts and effective cooling of the walls. This cooling occurs without simultaneous overheating of the housing and casing. The design includes protection against leakage into the room flue gases. There is also a fire safety device that stabilizes the action of the main burner and igniter.

Possible problems

No matter how well Czech and German developers treat their responsibilities, geysers can still cause various failures. Problems with water and gas blocks may be associated with mechanical defects in the water heaters themselves or with deformation of the supply cables. Also, as with other columns, problems are often created by:

• clogged heat exchangers;
• scale deposits on pipes;
• weak liquid pressure.

At the input to the column there is a filter in the form of a grid. It is designed to trap small debris moving with the flow of water. But since the mesh itself inevitably becomes clogged with this dirt, it needs to be cleaned periodically. When the column does not light up or goes out too quickly after starting operation, the reason for this development is almost certainly due to wear of the membrane. An element that continuously stretches under pressure fails over time, becomes overstretched, or breaks completely.

If you hear a pop when igniting and the wick immediately goes out, the fuse is dirty. Clean it by removing the casing and unscrewing the tubes of the draft indicator and the gas supply channel. In addition to the fuse itself, it is better to immediately free the wick and nozzles from dirt. In a situation where these measures do not produce results, the solenoid valve will have to be replaced. If there is a spark that does not ignite the burner, it is necessary to inspect and tighten the wiring of the ionization controller and clean its contacts.

How to deal with other problems

You can often hear that a gas water heater does not heat water well. The main reason is a malfunction of the heat exchanger, clogged with soot and soot. An accurate diagnosis can be made by the color of the fire - in the case of a real blockage, it turns yellow and may even deviate to the side. This condition threatens serious overheating of the casing and requires immediate cleaning.

To reduce the risk of scale, you need to avoid heating the water unnecessarily to 55 degrees and install protective filters. If a blockage does occur, it is necessary to close the gas pipeline and water supply circuit. After draining the remaining liquid in the radiator, remove the casing and open the way to the main plates. If necessary, they are not only cleaned with a brush, but also the problematic parts are removed and washed.

Water leakage does not appear suddenly, because the corrosion process develops gradually. Small holes can be seen as spots on the surface of the heat exchanger. It is best to inspect the structure after closing the tap, then the pressure will be higher and the problem will become clearer. Instead of soldering the radiator, you can use a rubber pad or cold welding.

In the latter case, you will also have to select a material whose melting point is higher than the expected heating during operation.

You can connect a system that has been in cold conditions for a long time after at least 2 hours in a warm room. You cannot use a geyser located closer than 0.1 m from walls or any other objects. There should be at least 0.4 m above it. If a thermostat is installed, it must be selected with an outlet without electric potential, since any discharge threatens to explode.

• accumulation of explosive and flammable substances nearby;
• connecting equipment without involving specialists;
• operation of a water heater that does not have a strainer at the water inlet;
• turning on hot and cold water at the same time when the water heater is on;
• using acids, even weak solutions, to clean the heat exchanger and other parts of the water heater.

Comfort:

The instantaneous water heater VEGA 13E is equipped with combined fittings from the German company Mertik, which ensures that the column is turned on even with a water flow of 3.25 l/min. Mertik fittings are also equipped with the function of automatically maintaining the set temperature, which is very important when there are changes in water pressure in the water supply.

Economical:

In the category of geysers, VEGA 13E stands out highest efficiency in the world, which is almost 92%. Thanks to a small but highly efficient heat exchanger, VEGA 13E begins to heat flowing water 15% faster than any other column.

Reliability:

The reliability of the column is ensured thanks to a number of design solutions:

Unlike all other manufacturers who use similar fitting designs, the Mertik combined fittings used in these dispensers have a different design solution, thanks to which the moving parts do not operate in a water environment, which prevents a common problem with all dispensers, namely water leakage in a leaky environment. the place where water and gas fittings are connected, which requires, as a result, the replacement of the entire unit.

The heat exchanger tubes inside are equipped with special turbulators that prevent scale deposition on the internal walls of the heat exchanger and ensure rapid heating of water.

The heat exchanger is made of tubes with a diameter of 18 mm, which not only significantly prevents the deposition of salts, but also effectively cools the walls of the heat exchanger without overheating the column casing.

Safety:

emergency thermostat, preventing overheating of water in the heat exchanger.

a backdraft fuse for combustion products that prevents gases from entering the room if the chimney is clogged.

The ionization electrode ensures proper operation of the main and ignition burners.

the column will not allow the main burner to start in the absence of water.

Buy with this product

150 rub.

180 rub.

400 rub.

Questions and answers

In August 2012, we installed a neva-4510 column and now every 1.5-2 years we have to change the membrane and microswitch, which costs 2,200 rubles. Total cost Repairs to a Neva geyser cost the cost of a new one. What kind of good quality are we talking about?

Please specify the country of the gas manufacturer Electrolux speakers GWN 12 and 14 currently

ANSWER: Good afternoon! The factory is located in China

What is hydroignition? I want to take a Bosch WRD 13-2G speaker. Am I right?

ANSWER: Good afternoon!
With this system, ignition occurs automatically when the water is turned on, without batteries. But such a system is not very reliable; we recommend purchasing a column with automatic ignition from batteries

What is the warranty period and which components are covered? and is it necessary to carry out regular maintenance to maintain the warranty?

ANSWER: Good afternoon!
The warranty on Electrolux speakers is 2 years from the date of installation. To extend the warranty for a second year, it is necessary to carry out maintenance a year after installation - this is a requirement for all geysers.

Hello! Electrolux 14 liter failed. Worked for 15 years. What column do you recommend as a replacement? Extra bells and whistles are not needed. I was choosing between Electrolux and Bosch. Maybe something else should be considered? Thank you

ANSWER: Good afternoon! Electrolux still remains good option. At Bosch lately There are many complaints - immediately after the warranty period expires, the heat exchanger begins to leak. And as an alternative, you can consider Baltgaz/Neva - no one can compare with them in terms of warranty period

Good afternoon Who answers the questions? Manager or engineer? If it's a manager, there are no questions. If I'm an engineer, then I have 2 questions.
1) the passport for the gas column states “capacity 6 l/min”, what does this mean? That at any input pressure (volume of passing water) only 6 liters of water will pass through the water block or that the heating specified in the documentation, for example, by 50 degrees, will be provided only to this volume (if it increases, the heating of the water will be less at a constant combustion power, if it decreases - more heating)?
2) In the series of gas pumps Neva Transit (made in China) the minimum is indicated. water pressure for start-up 0.02 bar. Is this not a mistake? Maybe MPa, not bars? Why is this value so low? For all manufacturers, this value is no less than 0.1-0.15 bar (=0.01-0.015 mPa=almost 0.1-0.15 atm).

ANSWER: Good afternoon!
1) This means that in a minute the column will release 6 liters of water, heated 25 degrees higher than cold water. If you want to heat water by 50 degrees, then the productivity will be 3 l/min.
2) Yes, an error. Minimum pressure 0.2 bar. Thank you for writing about this and fixing it.

Hello!
Please help me choose a RELIABLE gas water heater for the apartment, enough for 2 points of consumption, taking into account the low pressure in the water supply (2-2.5 atm in a system with the taps turned off).

ANSWER: Good afternoon! Our speakers are best suited: BaltGaz Comfort 13 or 15, or Neva 5514. If you are interested in imported ones, then Electrolux 14.

I've heard a lot about mora speakers top are the best. is this true? and which one would you recommend if not the 13 liter mora?

ANSWER: Good afternoon! Mora speakers are really good, but they have problems with the availability of components and their cost. In this regard, we recommend Neva/BaltGaz and Electrolux gas water heaters, which have no problems with this and are reliable - they have a warranty of up to 5 years.

Konstantin

Hello! I have a great desire to buy a geyser Neva 4508 at liquefied gas, in connection with this, where can I buy it in Moscow?

ANSWER: Good afternoon! You can buy from us, for example))

Good afternoon. The gas water heater is AEG 11 ERN. It suddenly broke down - when you turned on the water tap, it stopped giving a spark to the burner (the battery was changed). Is there a possibility of repair? If not, which one should I change to: Bosch 10 - 2V or Bosch 13 -2V with at the lowest cost(chimney, etc.)? Thank you.

ANSWER: Good afternoon! AEG speakers have not been sold in Russia for a long time. And you are unlikely to find spare parts for it.
We advise you to change not to Bosch, but to something more quality speaker- for example, Electrolux. In terms of displacement, I think 12 liters will suit you.

Alexey Anatolyevich Mikhailov

Good afternoon
I have an Electrolux GWH 265 ERN NanoPlus (5 years old). I suspect a malfunction of the water unit (water is oozing presumably from under the gaskets). Question: is it worth replacing the entire column? And if so, what is it worth? The same for another five years - somehow it doesn’t warm the soul. Does it make sense to consider Bosch W 10 KB or Electrolux GWH 10 NanoPlus 2.0 as an alternative? Will they be more reliable? The house has problems with water pressure (extremely low, even suites only work with the water flow tap turned up to the maximum and are regulated only by gas) and there are no problems with gas and draft.

ANSWER: Good afternoon! Most likely, replacing the unit will cost almost as much as new column. Between Bosch and Electrolux, choose Electrolux. Bosch 10 KB performed poorly in contrast to Electrolux. The model you indicated is correct - Electrolux GWH 10 NanoPlus 2.0, with bad pressure water it should work fine.

Good evening. Please tell me what metal the heat exchanger for Electrolux geysers is made of?

ANSWER: Good evening! Electrolux, like many other manufacturers, copper heat exchanger

Vladimir Alekseevich

How do the BaltGaz Comfort 13 - 15 dispensers differ from the Neva 5514 structurally (heat exchanger, ignition, materials used, functionality, etc.)? Thank you.

ANSWER: Good afternoon! The Comfort series speakers have a digital display that shows the water temperature and battery charge level. Otherwise there are no differences

Do you have Vaillant MAG gas water heaters?
(it says that it is discontinued, but the price is worth it)

ANSWER: Good afternoon! The speakers are indeed discontinued, we no longer have any leftovers.

Hello.
We bought and connected a Bosch Therm 4000 O WR 13-2 G speaker. A day later we noticed that from inside the heat exchanger drips approximately once every 1-3 minutes hot water. Sometimes a hissing sound is heard, as if a drop of water is dripping onto a hot surface, possibly onto a burner. Water drips only when the column is running. When turned off, water does not flow, although the column remains under water pressure (the tap is closed at the outlet).
Does this mean the heat exchanger is faulty? Is it necessary to do something in such a situation, or can it go away on its own with time?

ANSWER: Good afternoon! Most likely condensation is falling, there is nothing wrong with that.

What do you recommend to buy? Geyser...innovita 14i or Baltgaz comfort? Which is more reliable? Yuri

ANSWER: Good afternoon! We would recommend Baltgaz Comfort. They have a 5-year warranty, all components are Russian, good quality. It is also easier and cheaper to find components from Baltgaz in case of post-warranty repairs.

Hello, we decided on this product, the Bosch WR 13-2 B geyser with automatic ignition, but the question remained: “Is it possible to regulate the water temperature not on the column itself, but by opening an additional tap with cold water"Thanks in advance for your answer.

ANSWER: Good afternoon! This can be done, but it is not advisable - in this case the column will serve you less.

Who is the manufacturer

ANSWER: Hello, the country of origin of all Bosch speakers is Portugal.

how much does it cost to install a Bosch WRD 13-2 geyser?

ANSWER: Hello, usually installing a gas water heater costs 2,500 rubles. Materials are paid separately. It is better to check in detail with the manager or installer by calling the numbers on the website.

TAMARA Konstantinovna

Hello! Neva 3208 is hanging. I want to install Bosch WR13-2P. How much will a replacement cost? Thank you.

ANSWER: Hello, usually installing a gas water heater costs 2,500 rubles, dismantling an old one costs 350 rubles. Materials are paid separately. It is better to check in detail with the manager or installer by calling the numbers on the website.

Thank you, I received an answer to my question.
I have one more question. Is it possible to replace the Neva Lux 5013 water heater with a Bosch Therm 4000 O WR 13-2 B gas water heater and how much will it cost? Thank you.

ANSWER: Good afternoon! Of course you can. Dismantling an old column costs 350 rubles, installing a new one costs 2500.

the cost of a Neva Lux 5013 (5025) gas water heater, which water heater can be replaced with the least labor and material costs

ANSWER: Good afternoon! Consider 5514.