Management of a heating boiler in a house, apartment or cottage. Gas boiler control unit: principle of operation Controller for controlling a heating boiler

Remote control of the operation of gas boilers is increasingly replacing stationary and remote controls management. This is possible due to the installation of external sensors and a special controller with a GSM module on the boiler. Management is carried out from a mobile phone. You will be able to adjust the mode of operation at a considerable distance from the heater, quickly receive current information and, according to the situation, make quick decisions.

In this article:

What are the advantages of GSM boiler control

Benefits of buying a module:

• continuous offline mode system operation;
• there is no need for constant presence at home;
• stable and economical thermal regime;
• access of random people to the control system is excluded;
• instant informing about the situation and current parameters of the boiler;
• the ability to predict situations based on daily analysis of the system.

In case of deviations and malfunctions of the heating system, SMS messages are sent to the phone, and in the event of a gas leak or a power outage, the boiler automatically turns off.

Device use cases

Remote control gas boiler using the phone is not only comfortable, but convenient and profitable:

• For example, there is no need to maintain heat in the house when no one is there. You can turn on the heating by phone from anywhere and anytime. By the time you arrive, the house will already be warmed up.
• At any time, you can find out what the current temperature is in the house. Sent an SMS-request and immediately received a response.
• Suppose your house is located in a village, and suddenly there is a power outage. You instantly receive a message from the module about the current situation. You have the option to accept necessary measures to avoid financial losses and other unpleasant consequences that may be caused by stopping the boiler.
• If you need to leave the house for several weeks in winter, install a lower and upper limits temperature value. The system will constantly monitor this range by adjusting the heat supply.

Operating principle

Controlling a gas boiler from your phone

For remote control boiler and monitoring its current state, a GSM module is installed - the basis of the control controller.

This control system is intended for prompt notification through mobile phone channels about the current values ​​of parameters, violations of the specified operating mode and equipment failures.

GSM module functionality:

• Heating and auxiliary equipment at a distance (using phone commands in the form of sms).
• Provide remote turn off or turn on heating boiler.
• You can set the temperature of the coolant and other parameters of the heating system.
• Obtaining data characterizing current work boiler, from temperature sensors.
• In some situations, the control unit can start additional equipment.

The main task of the module is to control the operation of the heating system in accordance with the specified parameters. If malfunctions occur, the module signals them by SMS to a mobile phone.

A signal-message will be given in the following cases:

• emergency stop of equipment;
• exceeding the upper specified temperature limits in the boiler and the room where it is installed;
• triggering of a sensor indicating a gas leak or pressure surges (the signal is accompanied automatic shutdown boiler);
• activation of connected smoke and flood sensors.

The text of the message is changed for each input to the controller. In an emergency, the module issues a message to all telephone numbers that were specified during registration.

Launching the module

Setting up and turning on the module is usually carried out in the following sequence:

1. connecting the module to the heating boiler controller;
2. installing a sim card, entering a pin code;
3. Next, you need to set a pin code for the controller. This is necessary to protect identification in SMS messages;
4. entering all registered numbers;
5. sending a pin code to the controller's SIM card - in response you will receive a message about the current parameters of the boiler and sensors.

If you need to change some parameter (for example, boiler temperature), dial the code again, then the desired temperature. The response will confirm the new settings. This means that the GSM module is activated and enabled.

Popular Models

GSM-alarm system Sapsan

GSM modules must be selected depending on the type of boiler equipment and the requirements for the controller.

The most famous models are:

• Xital GSM with modifications 4T, 8T and 12T.
• Sapsan Pro 6 - for any boiler equipment, connection of 10 numbers.
• Telcom 2 - De Dietrich only, up to 5 numbers.
• Vitocom 100 – only for Viessmann, up to two numbers can be connected.
• Logomatic PRO GSM - only for Buderus, maximum amount numbers - 16 pieces.

Xital control system

In the market of GSM-alarm systems for heating equipment, the undisputed leader is the Xital system.

It's powerful integrated system remote control, since in many cases it covers not only heating, but also home security.

The module accumulates data on the temperature in the room, pool, pressure in the circuits, collects readings from security sensors, and simultaneously regulates temperature regime rooms within the given range.

GSM-module for the boiler Xital 4T

There are several modifications of Xital - GSM-4T, GSM-8T and GSM-12T. They differ from each other in the number of control zones - 4, 8 and 12.

Each device has an analog temperature sensor, as well as five external digital sensors that continuously measure temperature. 30 seconds after the sensors are triggered, Xital will send a message to the phone numbers (you can configure the equipment to turn off when an alarm is triggered).

Users can register up to 10 numbers, including ordinary - city numbers.

Start order

The initial start of the system is quite simple, you just need to follow the sequence of actions:

1. Insert a blank SIM card into the controller.
2. Plug in the power adapter.
3. Call by mobile phone to the number of the inserted SIM card.

The controller creates the initial setting, templates for voice dialing mailing lists, with the help of Caller ID, your phone number will also be entered into them. System startup completed.

After about a minute, you can do a control check. To do this, call the controller's SIM card again. After the call is reset, a response SMS should come with information about the temperature in the boiler and in the room, the state of the controller inputs, the presence of a network and the arming of the object.

The Ksital delivery set includes a battery, with the help of which the module can continue to work when disconnected from electrical network. We recommend that you get it in advance, since the battery of the module only lasts for a short time.

The maximum efficiency of the entire system is ensured not only by the optimal scheme of its connection and the availability of automation, but also from the installation site and technical parameters heating batteries. In this sense, they have many advantages.

Which one to choose for hydraulic calculation heating systems?

Andrey Viktorovich

I have been using your device KSITAL GSM 12T for 3 years now.
The device is mounted in metal box together with automatic power supplies and three solid state relays. An electric boiler with a total power of 6 kW is connected to the device through the already mentioned solid state relays. Everything works just fine and no complaints.
I got the impression that YOUR company has a very rare quality today - YOU work for people.

Aleksandr Vladimirovich

Good afternoon, dear Xital developers! We have been using your product for a long time. The latest version has many new useful features and options for customization, for which many thanks.

Anatoly Borisovich

Good afternoon, dear developers! My name is Anatoliy. I want to say right away that the equipment developed by your company, in my opinion, works for a solid "5"! (Except for some minor flaws, but they are not significant). The first time I encountered him when it became necessary to control the temperature in cold rooms intended for storage of the vaccine in one of the health facilities. The administration of the institution was satisfied and the employees directly responsible for the temperature regime of storage of drugs, too. After some time, there was a good experience of installing the gsm-controller KSITAL GSM-12 as a burglar alarm in a private house (with the ability to control electric boiler, as well as using various additional third-party sensors connected to security zones) ... In general, it turned out to be inexpensive " smart House"But it took a lot of time!
In general, I want to repeat: the equipment works very well! So, after these several cases of installation of equipment for gsm-monitoring systems "Ksital" I can draw an objective conclusion: that these devices are really reliable assistants in cases where it is necessary.

Andrey A.A.

For more than 3 years I have been professionally installing the Xital system for people and I do not plan to change it to another one, although I could master another one based on my qualifications. But, this is not necessary.
The basis for this conclusion: high reliability and stability of the system, provided by many years of experience of its developers, qualified technical support, attentive, and also my rather deep knowledge of this system.

Sergei Tatarinov

Good system which covered all my wishes. I control the boiler and use it as an alarm. Gas and smoke leakage sensors work without problems with the system. The extension block solved security and control issues with the buildings on the site.

Sergey Dorokhov

I looked closely at Xital for a long time - I chose analogues, compared with other manufacturers, but I stopped the choice on it and did not regret it. Their products are truly the best on the market right now. In terms of quality, stability in work, no one surpasses Xital. And ease of installation is another plus in karma. Is there some more Russian manufacturers, which you can be proud of and xital one of them

Andrey Malinin

I installed Xital a year and a half ago. For all this time - pah-pah, no complaints. Works stably, no failures and glitches were noticed. Due to the nature of the service, I often have to travel on business trips, and I need to monitor the operation of the heating - my wife, unfortunately, with the equipment is not only not for you, but not even for you ... :) Therefore, the gsm module from xital became my salvation. Now I plan to buy the same one for my parents. Recommend!

We bought the system for our house 4 years ago. I really liked the ability to control and manage the boiler, security functionality. Didn't expect this wide application and versatility. Over time, I used all 3 relays (boiler, watering, bath). This Xital is a very reliable thing. It is possible to receive a daily report. Control of electricity in the network. Really like mobile app. I recently reflashed the system and now there is the possibility of online monitoring at home. The system can do a lot, the main thing is to turn on the head. For all the time there was only one problem, it was decided by a call to technical support. I no longer worry about my home and property.

Constant monitoring of the heating system requires a lot of effort and time. However, the emergence of new control devices can greatly simplify this process, and in some cases completely automate it. To do this, you will need to install the appropriate controller for heating and boiler control systems.

Purpose of heating controllers

The main purpose of this electronic device is to change the parameters of control devices connected to it in order to adjust their operation. by the most simple example An elementary similar control element can be considered an automatic control protection system in gas boilers. But controllers for heating and hot water have a wide functionality.

They are an electronic unit with the ability to control the main elements of the heating system. To do this, it provides the possibility of programming parameters depending on the data received, from external temperature and pressure sensors. So, a controller for a heating boiler can regulate the operation of a floor heating collector or individual thermostats on radiators.

To general characteristics electronic control units include the following:

• System flexibility. For connection to heating components, it is not necessary to reprogram the device. In most cases, manufacturers provide several operating modes for one connection terminal;
• Possibility of choice convenient place to install the control panel. Controller Heating Honeywell can be mounted at a distance of up to 100 m from the control element;
• Control over the functioning of not only heating systems, but also hot water supply;
• If you have a GPS unit, you can online mode receive data on the state of heating and send commands to change its parameters.

Important is the function of connecting the device to a computer. A similar additional module is installed on the Aries heating controller. It is noteworthy that it is not included in the mandatory package.

The controller can be installed on an old gas boiler. To do this, it is enough to change the heating pad to a new modular type.

Selecting a heating controller

When should a heating controller be installed? First of all, this device is necessary for frequent absences in the house or apartment of residents. By connecting the electronic unit to external temperature sensors (outdoors and indoors) and the boiler control terminals, you can use the built-in software package set the automatic change in the intensity of the burner operation.

How to choose the best controllers for heating systems? The easiest option is to consult with experts. But it is currently difficult to find them, as this product is relatively new. Therefore, it is recommended that you first study the main selection parameters yourself:

• When comparing a controller for a heating boiler, make sure that installed equipment has the ability to connect to the control unit. Most often, the boiler is characterized by one-stage or two-stage external control. This only applies to gas models- coordination with solid fuel is impossible;
• The number of managed components. For a Honeywell heating controller, this value can be up to 15 depending on the specific model;
• The presence of a GPS block. As mentioned above, this feature allows remote control heating;
• Update frequency software. The modern TRM 32 heating and hot water controller can be connected directly to a computer. On the manufacturer's website you can always find latest version ON.

An additional function is the regulation of the operation of the components according to the set heating schedule. This possibility is provided in the Aries heating controller. You should also pay attention to the accuracy of measurements. In professional models, this indicator should not exceed ± 0.01 of the scale.

Repair of heating controllers is rare. However, it is still recommended to choose a manufacturer that has service centres in the region of residence.

Overview of popular controller models

Having decided on the required parameters of controllers for heating and hot water, you can begin to analyze the proposed products. Despite the large assortment, the market is oversaturated with low-quality models. Their actual parameters do not correspond to the declared ones, which subsequently leads to wrong work heating. Consider truly popular and reliable examples of heating control controllers.

Honeywell

Among the entire product range of the company special place occupies the Smile SDC7-21N model. In addition to an affordable price, it is characterized by optimal functionality, which is important for heating controllers.

It is important for the consumer to know the characteristics of the electronic device. It should be immediately noted that for optimal performance Honeywell controller in the heating system will need to be purchased additional modules- terminal blocks for connecting system components, a set of temperature sensors, mixing 3 way valve and drive. After assembling the controller, it will be possible to control heating and hot water according to the following parameters:

• Possibility of regulation of work of a torch of a copper with two-stage management;
• Simultaneous control of 2 cascade type boilers. But for this you will need to install an additional temperature sensor at the outlet of the second one;
• The controller for the heating system can regulate the direct and mixing circuit, depending on the street and room temperature;
• DHW pump control;
• Possibility of setting a 7-day heating control program.

In the minimum configuration, it will only work as a controller for a heating boiler. But this does not prevent over time to purchase additional modules and upgrade the system. The cost of a complete set is about 45 thousand rubles.

Best to buy full set equipment, since all of its components are guaranteed to work properly when connected to each other.

Aries TPM 32

If you need to choose an option for more affordable price- it is recommended to pay attention to the Aries TPM 32 heating controller. This domestic product is in no way inferior to foreign analogues in its functionality. It is noteworthy that it can be used to control not only heating, but also hot water in several ways.

It should be immediately warned that the TPM 32 controller unit for heating and hot water systems is more massive than the similar Honeywell. Therefore, you need to think in advance about the place of its installation. In addition to it, the manufacturer offers a remote panel.

As for the functionality, in addition to the standard features, the following features of the controller for heating and hot water of this type should be noted:

• Automatic maintenance of water temperature in the DHW circuit;
• Using PID controllers, it is provided high accuracy coolant temperature;
• Built-in heating protection against reverse water movement;
• Availability of day / night mode. In particular, this function is relevant for two-tariff electricity meters.

But the most interesting for the consumer is the cost of the Aries heating controller. The price of the basic model without additional equipment is 8-10 thousand rubles.

Can I install a controller for heating and boiler control systems myself? Despite the apparent complexity, the instructions for each model describe in detail which terminals should be connected to the heating components. If you carefully study technical documentation controller and boiler - you can install the automation yourself.

Automation is firmly established in all spheres of life, bringing safety and convenience to it. Modern heating systems were no exception, today they are equipped with devices that simply simplify the management process, but also allow you to save energy.

How does the controller work to control the heating boiler

The controller for the boiler is the central node in the entire system. It sends signals to each of the elements and mechanisms, as a result of which the cyclical operation of the system is determined, and the parameters of all devices connected to it are changed and corrected. In addition, it has the function of connecting to the GSM-Monitor, which allows monitoring and regulation in remote mode and through the Internet. In the event of failures or malfunctions, the boiler control controller will instantly turn off all nodes, and send a notification to the owner of the house on a mobile phone.

Any boiler control controller is a small electronic panel with which the parameters are set, and some functions are also programmed depending on the data that comes from pressure or air temperature sensors.

The burner control controller regulates the burner operation mode and automatically captures statistical data that can be stored in the built-in computer memory for up to 20 years (depending on the controller model). The warning system turns on in the form of an audible signal, which indicates a malfunction or dangerous situation. The heating boiler will be switched off to avoid an accident. The controllers have a function to return to the factory settings. As a rule, they involve automatic adjustment of the fuel supply, maintaining comfortable temperature indoors, ignition of the boiler. Automatic parameters are set based on the average air temperature, humidity in a particular region, which allows the user to provide a comfortable indoor climate without any extra knowledge.