For quick access to the toolkit, you should properly organize the storage system. An organizer and a tool box help to cope with this. With their own hands they are made from solid wood, plywood, chipboard, various types of plastic and tin.
The material is selected based on the size of the product and the skills of the carpenter, each has its own advantages and disadvantages.
Home varieties
For stationary storage of tools, open or closed stands and spacious chests of drawers are suitable. In these options, it all depends on their location - a garage or an apartment. In the first case, it is more convenient to organize a stand of the right size on the wall so that everything is open and freely available.
For apartments, designs with shelves or plywood drawers, cabinets and even a suitcase are suitable. They can accommodate organizers and cases for power tools and hardware. Small stands can be built on the doors and side walls. The more correctly organized the filling, the longer the order will be maintained.
To accommodate the main set of tools, wrenches, heads, bolts and nuts, a small container with a handle can act as mobile options. With large dimensions, wheels can be screwed to it. Then you should choose the material, calculate the acceptable dimensions, choose the model and type of fasteners, draw up a drawing for the tool box with your own hands or use ready-made offers. After that, you can start manufacturing.
In addition to safety, a do-it-yourself tool box helps with the work. Its sorted content, when each item is in its place, allows you to eventually find everything you need without even looking inside.
The standard placement of a hammer, wrenches and pliers occupies one large compartment. Screwdrivers are inserted into the holes on the horizontal bars.
Classic drawer options
This kind of do-it-yourself tool case is easy to perform. The accessories of the main set lie in sight, each in its place. It is useful for transfer outside the workshop. Tool carriers tend to be heavy, so don't make them too big or made entirely out of planks. Some parts can be replaced with plywood.
open with baffle
Before starting work, make sure that the workpiece material is dry. For the first version you will need the following materials and tools:
- pine boards;
- plywood;
- thermal or PVA glue;
- nails and screws;
- hacksaw, jigsaw or grinder;
- drill or brace and drill for wood;
- a hammer;
- chisel;
- tape measure or ruler;
- pencil or marker.
Plywood or cuttings of pine boards are suitable as a material. According to the drawing, markings are made and blanks for the body are cut. Special grooves are cut out in which the partition will stand. To organize them, you will need a milling cutter or a hacksaw with a chisel.
The drawing shows the classic dimensions that are optimal for assembling the box. All blanks are cut according to the scheme, when changing one parameter, it is necessary to proportionally subtract or add from the others:
- transverse walls - 2 pcs.;
- sidewalls - 2 pcs.;
- partition groove.
Sand all prepared elements, assemble a rectangular box. To prevent the structure from falling apart, the attachment points and the ends of the blanks are coated with glue. Additionally, the box is knocked down with small nails or twisted with screws.
In the upper part of the plywood blank, a handle is cut with a hacksaw, jigsaw or grinder. Prepared grooves are lubricated with glue. After that, a partition is installed in them.
From the blocks are made pads for the handle. The corners of the workpieces are processed with a planer and sandpaper, fastened with glue or cloves. From wooden slats cut to the size of the partition, you need to make holders that are placed horizontally on the partition. Suitable holes are drilled for screwdrivers with a drill. Pliers, wire cutters, etc. are placed in rectangular grooves.
The entire structure must be covered with a protective compound. To do this, you can use varnish or paintwork material with special additives.
Organizer in a stool
With this organizer design, you can carry the tool to the right place and sit on it and reach out to a place that is slightly higher than your height. Materials and tools are the same as in the previous case. Cut out of plywood:
- Cover 550x380 mm with a cutout in the center 140x40 mm.
- Longitudinal drawers 470x150x540 mm and a bevel angle of 75 °.
- Two sidewalls 306x380 mm.
- The legs and handle are made of bars 385x40x50 mm. At the ends, saw off the bevels at an angle of 15 °.
Assembly is done with screws. Sharp corners are rounded with sandpaper. The product is cleaned of dust and covered with a protective composition.
Type of homemade carrying
If you want to make something more elegant with embossed forms of the side racks, this homemade tool box is just right. First you need to take boards with a thickness of 16 mm. Make parts from them, as in the diagram, and take a round aluminum stick or other metal tube.
Along lines parallel to the edges, holes are drilled on the side walls for self-tapping screws to fasten the structure. With sanding paper or an electric machine, burrs are removed and sharp corners are smoothed out. After that, the prepared parts are assembled: the bottom and sides are fastened with glue and screws.
Using the same marking method, vertical racks are installed, between which a horizontal handle is fixed. Screwdriver holders are screwed with self-tapping screws. The entire surface is cleaned of excess glue and dust.
For protection, the product is varnished or painted. After drying, the box is ready for use.
Almost every man has a set of tools in his house or garage. Therefore, it is worth keeping them in perfect order. How best to do this, a new review will tell. Surely everyone will be able to find in it examples of the organization of the storage place that interested him.
1. Plastic cans
Cropped canisters are perfect for storing nails, screws, bolts and nuts. And in order not to dig for a long time in search of the necessary, it is better to mark the containers.
2. Wooden shelf
A narrow wooden shelf with holes is a great place to store screwdrivers.
3. Stand
To prevent pliers from being scattered throughout the garage, make a special wooden stand for them.
4. Railing
A thin metal rod is perfect for hanging paint brushes.
5. Individual cells
From the remnants of PVC pipes, you can make convenient cells for the careful storage of small power tools.
6. Wooden rack
A homemade wooden rack for storing wrenches will allow you to forget about the mess and tedious search for the right tool forever.
7. Open locker
An open wooden cabinet is the best place to store spray paints, which are most often randomly scattered in the garage.
8. Mobile stand
A small stand on wheels is perfect for storing hand tools. This rack is very compact and will always have the right tool at hand.
9. Wooden stand
Stylish wooden stand with a shelf, which is suitable for storing a wide variety of tools. Such a product will help not only to streamline hand tools, but will also become a real decoration for the men's monastery.
10. Homemade rack
An unnecessary pallet can be turned into a convenient stand for storing garden tools, which often take up a lot of space in the garage.
11. Hanger
A simple wooden block with metal hooks will solve the problem of storing power tools forever.
12. Hangers for clothes
Simple manipulations with an ordinary clothes hanger will allow you to turn it into a convenient organizer for storing electrical tape and adhesive tape.
13. Storage system
Pitchforks, shovels, rakes and other garden tools are not very stable and also take up a lot of space in the garage. Reliable wooden hooks on the walls will help you correctly place garden tools along the walls of the garage or shed.
14. Folding table
A homemade wooden folding table and wall-mounted storage rack for hand tools is a terrific idea for small garage owners.
15. Glass jars
Ordinary glass jars with metal lids are perfect for storing various small items. For greater convenience and reliability, the lids of the cans should be screwed to the shelves.
16. Vertical storage
The usual average garage looks very cluttered. The competent organization of storage systems will help to solve this problem. Instead of another closet, equip the walls with various shelves and hooks, which will allow you to neatly place a variety of things, from tools to a huge boat and bicycles.
17. Magnets
Magnetic tape or separate small magnets are a great idea for storing screwdriver bits, drill bits, and other small metal parts.
In continuation of the topic, we will talk about anywhere.
A box for storing various small things and products is considered an indispensable attribute in a modern economy. Thanks to this design, all things are in their place, while not forming a mess. For example, vegetables and fruits should be stored in a ventilated building where fresh air can freely enter.
For tools, monolithic products without any holes are suitable. For various little things, designs with additional doors and a folding mechanism are suitable.
We offer original options for storage boxes made by hand. Here you will find out what materials and tools will be needed for the manufacture of these products.
What materials are used to build structures?
Most often, boxes are made of wood and other materials. For tools, it is better to choose solid pine or maple. Alder or aspen is suitable for products. These tree species are distinguished by their durability and strength. They do not emit resinous secretions and do not dry out over time.
Plywood is suitable for the manufacture of decorative products. Here you can place every little thing. To fix the parts, a special adhesive composition is used.
Master class on creating a box with your own hands
We offer step-by-step instructions on how to make a box at home. To do this, you will need the following tools and materials:
- tape measure;
- simple pencil;
- board 25 mm thick;
- wooden trimmings 15 mm thick;
- thin plywood;
- metal corners;
- nails and screws;
- hacksaw;
- screwdriver;
- metal hinges for opening the lid structure;
- a hammer.
The first step is to familiarize yourself with the diagrams and drawings of how to make a box. This will allow you to correctly compare the dimensions of the finished product. Do not make structures that are too large, as they will take up a lot of free space.
When all the components are ready, you can proceed to the manufacture of a storage system for vegetables and fruits. The process includes several steps:
On the surface of the boards, we mark the size of the side parts of the product. Next, move on to the bottom of the box. We mark the size on the wooden trimmings. After that, using a hacksaw, we begin to cut the blanks.
We fix the boards together with small nails. We fasten the bottom details using the same method.
The cover of the product consists of a plywood sheet. It is installed on special hinges that allow you to control the closing process.
The do-it-yourself box photo shows the entire workflow.
Tool storage box
This kind of design is considered the best DIY drawer idea. This product will allow you to keep all the working tools in one place. Here you can make additional departments for storing screws, nails and nuts.
For this you need to prepare:
- thin board;
- thick plywood;
- hacksaw;
- electric jigsaw;
- a hammer;
- screwdriver;
- tape measure;
- drawing of the finished product;
- metal corners.
On sheets of thick plywood, we make markings for the details of the box. After that, we drill holes for fastening metal loops. Next, we connect the side parts to each other.
Let's start making the bottom for the storage system. To do this, we attach a thin board to the side of the box. So that it does not fall under the weight of the tools, it must be strengthened with thin boards. To do this, several wooden elements are stuffed on the bottom surface.
In the side parts of the plywood we draw the markings for the handles. They will be cut inside the main body of the product. Here you need an electric jigsaw. The cutting base is installed at the beginning of the markup.
In the process of cutting parts, do not make sudden movements. They can cause cracks on the surface of the product.
Now let's start installing partitions. To do this, cut out a small square from thin plywood. It is fixed with metal corners in the middle of the structure.
The diagram shows a detailed image of the tool box. The drawing shows the exact number of parts:
- side parts - 4 pcs.;
- bottom - 1 pc.;
- partition wall;
- handles - 2 pcs.
DIY drawer photo
The various designs of tool boxes discussed in the article are united by the ease of doing it yourself. Choose the right project and, guided by our drawings and photographs, make yourself a convenient portable storage for the tools and equipment used in your work.
simple open box
This box is good because the tools in it are located in their places and are in sight. You can’t put many devices in it, but there is a place for the main ones. An open box is useful in household use when you need to repair something outside the workshop: they reported to the box what was missing and went to work.
A wooden tool carrier comes out heavier than factory counterparts, so you should not plan it too bulky. The box will not beat the knees if you make it narrow. The high handle also adds convenience - you don't have to bend down low to pick it up.
Pick up suitable pieces of plywood and pine board trimmings. Mark and cut out the details of the box. Select the grooves in the blanks with a hand router or make two cuts with a circular saw and clean the recess with a narrow chisel.
Details of the box body: 1 - wall (2 pcs.); 2 - sidewall (2 pcs.); 3 - bottom; 4 - groove along the thickness of the partition and a depth of 1/2-1/3 of the thickness of the material
Sand the surfaces and assemble a rectangular box from blanks. Lubricate the ends with carpentry glue and fasten the parts with small carnations.
Saw out a central partition from 5 mm plywood, the width of which should be 1 mm less than the distance between the grooves in the walls of the box. Mark the location of the cutout for the hand, drill the entry hole for the file, and cut the plywood with a jigsaw.
Partition drawing
Spread the grooves with glue and install the partition in place.
Make two pads for the handle from a block with a section of 20x45 mm, rounding the corners of the blanks with a planer. Prepare holders for hand tools from the rails: in one, cut out recesses for pliers and tongs with a jigsaw, and in the other, drill holes for screwdrivers with a drill. Using glue and screws, fix the parts to the partition by placing them at different heights.
So that the surfaces do not get dirty for a long time, cover the box with varnish.
Toolbox in stool
In this upside down stool, you can move the tool to any place in the house or yard, and put it on its legs, reach for a shelf or hammer a nail where your height is almost not enough.
Using plywood or OSB with a thickness of 10-15 mm, cut out the cover (item 1), longitudinal sides (item 2) and sidewalls (item 3) according to the dimensions indicated on the drawings.
Make a handle and four legs with bevels at the ends at an angle of 15 ° from bars with a section of 40x50 mm.
Assemble the stool by fastening the parts with screws.
Box assembly scheme: 1 - cover; 2 - tsarga; 3 - handle; 4 - leg; 5 - sidewall
Round the edges of the cover and the oblong cut in it, apply a finishing coat.
Box for the young master
If your child enjoys crafting or repairing, make a small box with him for his favorite tools.
Take planed 16mm boards and cut out the pieces according to the drawings. Prepare a round birch stick for the handle.
Drawings of the details of the box: 1 - sidewall; 2 - bottom; 3 - handle; 4 - handle stand; 5 - holder
Draw lines parallel to the edges on the sidewalls corresponding to the positions of the handle posts, drill through holes for the screws between them.
Remove the burrs with sandpaper and proceed to assemble the box. Connect the bottom and sides with glue and screws, then install the handle stand along the marking lines.
Now replace the second post while inserting the handle into the blind holes. Screw on the screwdriver holders.
Color the box in the color your child chooses.
Wooden box with lid
The necessary set of tools varies depending on the hobby or profession, respectively, and the internal structure of the box may be different. The next tool carrying option is suitable for any equipment, it is distinguished by its solidity and reliability.
Use light wood for the box: pine, linden or poplar. The optimal thickness of planed boards is 12 mm, thinner ones are more difficult to fasten, and thicker ones will increase the weight of the structure.
Required accessories:
- Pen.
- Corners - 8 pcs.
- Latch — 2 pcs.
- Loop - 2 pcs.
Mark the lumber according to the drawings and cut the blanks.
Cutting blanks for the box
Table. Parts list
Make sure the cutting is correct by folding the box out of the blanks. Sand one by one all the parts with sandpaper No. 220 and mark them. Assemble the bottom and lid of the drawer using clamps, corner clamps, or mounting brackets to secure the blanks. Lubricate both joining surfaces with wood glue.
Drill guide holes for the screws and countersink for the hats, and after fastening the parts, wipe off excess glue with a rag.
Fasten the blanks of the body of the portable part. Replace the dividing partitions by screwing them on the sides and bottom with screws.
Screw the carrying handle in the middle.
Install support rails inside the drawer at a distance of 30 mm from the top.
Clean out pencil marks and burrs near the screws with a fine sandpaper, blow dust off the surface.
Cover the box with a layer of polyurethane varnish, after drying, remove the raised pile with a “zero” and repeat the finish.
Align the hinges with the gap between the body and the lid of the box. Mark and make pilot holes for screws 10 mm deep, fasten the hinges.
Screw on the corner pieces using small screws.
Install the handle and latches on the lid.
Fill the finished box with the tool.
If desired, place containers with dividers or cassettes for storing small items in the large compartment of the drawer.
If you decide to add partitions inside the box, make them removable so that you can change the free space for a new tool.
Home instruments have an amazing ability to get lost at the most inopportune moment. If hammers and screwdrivers are used periodically, they are stored anywhere: mezzanines, cabinet shelves, balcony.
Therefore, when the wife asks to hang a shelf, remembering exactly where the drill and self-tapping screws are located will be problematic. It is much more practical and efficient to store tools in a special box, which can be purchased ready-made or made by hand.
What to choose
We note right away that the tool box can be different, and the shape and dimensions directly depend on what is supposed to be stored inside the case.
For hand tools. Usually this is a rectangular design with a handle, where the interior space is delimited into one large compartment and 2-3 smaller compartments. It is convenient to store hammers, screwdrivers, fasteners here.
For power tools. Such cases are usually produced by the manufacturer of the instrument itself. Standard option: a portable box, where one cell is reserved for a power tool and exactly repeats its shape, the rest are intended for equipment: drills, batteries and other things.
Organizers. These are modular designs, consisting of several drawers of various shapes and sizes. Such options are suitable for professionals and home craftsmen, they are easy to store and transport, help to quickly find any little thing.
When the problem of tool storage arises, the first thing that comes to mind is to purchase a ready-made box in the store. However, this is not the best option. The fact is that factory designs are focused on the average buyer, so they may not be suitable for a specific model of grinder or drill. In addition, the number of tools is usually added and the interior space becomes small.
To avoid these problems, you can make a tool box yourself with a little effort and creativity.
From the boards
If there are few tools, they are used periodically and only for home use, it makes no sense to manufacture a complex structure. It is enough to make an ordinary wooden box from boards so that screwdrivers, hammers and self-tapping screws are simply in one place, and not lying around the whole apartment.
Given that we are talking about an elementary product, you can do without a preliminary drawing. The main thing is to decide on the size of the sides. For the material of manufacture, it is better to choose a softwood edged board: this is the most affordable option that is easy to process.
The homemade box consists of 5 parts:
- 2 side walls;
- 2 end walls;
The elements are cut out in accordance with the planned dimensions, treated with sandpaper and fastened together with self-tapping screws. For greater reliability, the side parts can be fixed with metal corners.
Such a homemade wooden box is inconvenient to carry, but it will help to store tools in one place and not look for them all over the apartment. It can be put in the trunk of a car, on a storage shelf or in a garage. Sizes vary depending on what exactly is supposed to be stored inside.
From plywood
DIY plywood tool boxes attract attention with an interesting design. They are easy to use and emphasize the professionalism and qualifications of the home master.
A convenient plywood box with a handle will consist of the following items:
- bottom - dimensions 450 * 200 mm, a shallow groove is cut in the middle for a transverse partition;
- walls - cut out in the amount of 4 pieces. A groove is also cut in the middle of the end elements;
- transverse rack - recommended height 400 mm, length adjusted to the width of the bottom, taking into account the sidewalls. The upper corners of the rack are sawn off to make a trapezoidal shape.
The assembly is carried out according to this scheme. To begin with, the body elements are glued together, tightly pressed against each other. While the glue dries, a hole is sawn out in the transverse rack, which will act as a handle, wooden dies can be glued in the upper part for ease of grip. Next, the rack is installed in pre-prepared grooves, fixed with glue.
After completion of the work, a plywood box for tools is obtained, convenient for carrying. However, the design can be made more functional. To do this, wooden dies with pre-drilled holes are glued to the transverse partition, where you can place screwdrivers, pliers, side cutters and other tools necessary for doing homework.
To prevent the box from drying out, it is covered with several layers of varnishes. For greater reliability, if desired, the bottom is fastened to the walls with corners.
Transformation into a stool
From plywood and wooden blocks, you can make a portable tool storage box, which, when turned upside down, will turn into a simple stool or stand for working at height. This universal design is made according to this scheme.
The bars are cut according to the given size. They will serve as legs and be tilted. To make the stool stable, the upper and lower ends are cut off at an angle of 15 degrees.
Sheets of plywood are nailed to the legs, which will become the end walls. The recommended width is 360 mm, the height is selected in such a way as to completely hide the legs without protruding beyond them.
The side walls are cut out of plywood, occupying about half the bar in width. The edges of the rectangle are cut at an angle to exactly match the angle of the legs.
The cover is made rectangular, attached to the ends of the racks with self-tapping screws.
After the work done, turn the resulting stool upside down, turning it into a deep box for storing tools. To make the structure convenient to carry, a wooden block is cut out, which in length will correspond to the distance between the walls. They round off sharp corners, screw the bar with self-tapping screws and get a convenient handle, which additionally acts as a stiffener.
drawer organizer
This is a more complex design, but it is ideal for storing large tools and additional small things: fasteners, corners, studs and much more. At first glance, such boxes seem to be a complex mechanism, but in fact they can be made on your own, spending a little free time.
The manufacturing process is conditionally divided into 3 stages:
- assemble the body. This is a deep plywood box with an open top, which is designed to store a large tool, such as a grinder, a screwdriver or an electric drill. However, you can do the opposite: delimit the internal space into several sections with wooden dies and store bolts, nuts and self-tapping screws here;
- additional boxes. There will be 4 of them, and they are installed on top of the main box, which must be taken into account when determining the dimensions. Additional drawers should not go beyond the boundaries of the base. To give the structure a complete look, the upper boxes are equipped with lids;
- separate elements are combined into a single whole. To do this, the organizer is assembled into a finished form, markings are made on the walls for installing metal plates: 3 pieces for a group of boxes on each side. Then, in accordance with the markings, holes are drilled where the bushings are installed.
To make the organizer easy to carry, the top drawers can be additionally equipped with handles.
Note that the simplest options are given here. With a little effort, you can turn an ordinary toolbox into a work of art that will become a real decoration of the garage, country house and city apartment.
