Diagram of the electrolux geyser. We bet on the electrolux gas column. Features of geysers Electrolux

Solving the problem of heating water in a private house or apartment today is not difficult. In this situation, it would be appropriate to use gas water heaters. good option This equipment is considered a device from Electrolux, which has proven itself well. Products in this category are safe, easy to use, and not very expensive.

Peculiarities

Electrolux water heaters are equipment that can heat water and maintain its temperature for a long time and without interruption. The design can perform its functions in any conditions. Technical features devices provide columns with reliability and safety. The water heating equipment of this company is able to work not only on one or several points of water intake. It has found wide use both in the domestic sphere and in offices.

Each model has its own characteristics and performance, so when choosing a product, the buyer should be guided by personal taste and needs. Consider the main characteristics of the Electrolux speakers.

• Power. The manufacturer sells a product that can be of three types and differ from each other in performance and power: low-power equipment - 17-19 kilowatts; medium power - 20-24 kilowatts; powerful - 25-31 kilowatts. Each presented option can work for a certain number of water intake points.
• Control method. The manual control method has long been outdated, it has been replaced by a new, more advanced one. Modern models of Electrolux geysers have a built-in burner with independent power modeling. Thanks to this, the equipment is able to control the temperature mode, as well as maintain it at required level even at low pressure. Automatic system independently selects and regulates the temperature.
• Ignition type. The manufacturer sells several models of gas water heaters: with manual, automatic and piezo ignition. The equipment of the first option is now practically not found. Automatic ignition is the most convenient option to use.
• Safety. Electrolux speakers are equipped with three-level and four-level security. When unexpected interruptions occur in the system, for example, a pressure change, a gas or water leak occurs, the device turns itself off.

Electrolux water heating equipment is characterized not only by improved technical parameters, but also attractive design. Everyone can choose for themselves perfect option which will fit perfectly into the interior. Geysers are presented both in a minimalist style and with an improved external panel. Devices on the front panel of which you can change pictures that fit the style of the room are very popular.

Electrolux appliances have good quality. The service life of gas water heaters is ten to fifteen years, but subject to their regular maintenance and careful attitude to the equipment.

Device and principle of operation

All geysers have a similar design and functioning system. Geyser Electrolux on the body has handles - toggle switches, they regulate the heating power and water supply. Each device has its own throughput, some columns can heat up to sixteen liters of liquid per minute. Thanks to the optimal chimney connector, the equipment of this manufacturer is characterized by versatility. Geysers can work together with an exhaust system.

Equipment elements:

• control pads and adjustment buttons (many Electrolux models are equipped with a display on which you can see the water temperature and all other indicators);
• solenoid valve;
• copper heat exchanger;
• openings for water and gas inlet;
• a hole for the exit of the heated liquid;
• chimney hole;
• drain tap;
• fastener elements.

Thanks to the quality of parts and construction, this equipment is absolutely adapted for use in our country. If the water supply pressure or gas pressure changes in the line, the device will function at the same level. Two pipes are mounted in the body of gas water heaters, the first for gas supply, the second for water. At the bottom of the equipment there are burners that have a main view and an ignition one. Depending on the chosen model, the device has electric ignition, piezo ignition or manual ignition.

There is nothing complicated in the principle of work water heater. The heat exchanger passes cold water, in it the liquid heats up thanks to the burners located below. The oxygen necessary for combustion penetrates into the apparatus through ventilation system. The gas that is exhausted exits through the chimney. The flow of heated water enters the sink through a pipe.

Popular Models

Electrolux has established itself with the most better side. This is evidenced by customer reviews and experts. Electrolux GWH 265 ERN Nano Plus is a heater in demand today, which is characterized by a power of 20 kW, as well as a capacity of ten liters of water per minute. Thanks to the presence of electric ignition, it is easy to use the equipment, for this you need to change the batteries in a timely manner and open the mixer. The dimensions of the device allow you to install it even in a small room.

The steel burner of this model and the copper heat exchanger have long term use. The radiator does not contain oxygen and lead, so the equipment is absolutely safe for others. Nano Plus has a temperature limiter that protects the device from overheating. Judging by the feedback from consumers, this model is not only compact, but also easy to use. There are practically no shortcomings, but buyers say that if the equipment is configured incorrectly, it can malfunction and make noise. That is why it is necessary to strictly follow the rules in the instructions.

Another one interesting model equipment is a geyser Electrolux GWH 350 RN. Its main advantages:

• long service life;
• simplicity of design;
• productivity up to fourteen liters of water per minute;
• the presence of a window for controlling the flame;
• the presence of piezo ignition, so the device does not need to change batteries.

In consumer reviews there is information about some of the shortcomings, that arise when using this model:

• large body dimensions;
• the flame does not ignite instantly.

Often users prefer the water heater model Electrolux equipment GWH 275 SRN. This device is characterized by unpretentiousness, simplicity and reliability. Advantages:

• simple and at the same time interesting design;
• simple design, which is not burdened by electronics;
• long service life;
• reliable elements, thanks to which water leaks are excluded;
• quick connection and no need to change batteries.

Flaws:

• the geyser must be turned off during a long absence, since an igniter is built into it;
• the knobs are too sensitive, so there are some difficulties in setting the temperature.

User manual

Everyone who has purchased water heating equipment must use it correctly, without violating safety rules. Basic rules of use:

• it is forbidden to use a geyser at a time when there is no draft in the chimney;
• do not use broken equipment;
• the room in which the geyser is installed should not have leaks - if such a situation occurs, it is necessary to urgently ventilate the room and call the gas service.

Every gas column owner must remember that gas leaks can be very dangerous. The operating instructions supplied with the kit must be fully complied with. There are situations when the column does not work when the water is turned on or slightly heats the water. In this case, it will be necessary to check its heating elements. It is important to know that any heating element has an expiration date, so the user must have batteries in stock to change at the right time.

Everyone who has just purchased Electrolux equipment is interested in the question of how to turn on the column and light it up. The first step is to turn on the taps for supplying water and gas. This is done in three ways.

• Manually.
• Piezo ignition, which is quite simple to use. To turn on the device, it is enough to press the button, as a result of which the filter is ignited.
• Automatically. Using equipment with such a system is a pleasure, because you don’t need to do anything, everything is done by the technician.

To properly set up the operation of the gas column, you do not have to use a lot of knowledge and skills. On the panel of the device there is a scale and two handles. There are divisions on the first scale, and using the handle, the required fluid supply is set. At the same time, the second scale and the handle are intended for setting and adjusting the gas supply. It is necessary to set up the functioning of the gas column immediately after installing the device. Thus, the operation of the device and the consumption of water and gas are optimized.

It is necessary to adjust the water flow, guided by the nominal pressure, which is indicated in technical passport goods. In order to set the performance value, the valve is opened with hot water, the handle is installed on the scale, and the tap is closed.

For work preparation gas cock, first of all, you need to install the equipment at the minimum mark. After that, you need to connect the column to the network or insert batteries. Next, the valve on the gas pipe opens. After the hot water tap is opened, the device will automatically turn on and the liquid will be heated. Many Electrolux models have an economy mode, the setting of which is described in the instructions for the equipment.

Faults and their elimination

Geysers are devices that are used continuously, so even the most expensive model can break down. The main problems that the user faces when using this type of equipment are as follows.

Column does not light up

There are several reasons for this situation. First of all, you need to check the burning of the igniter, if it is faulty, then you should call the master who will clean the element. In columns with electronic ignition, it is recommended to check the solenoid valve, it often cuts off gas supply. The solution to the problem can be a simple battery replacement. The geyser does not turn on if there is no draft in the ventilation well. Removing the blockage will help return it. As the reason for the lack of ignition, wear of the water membrane can be considered. In case of deformation, spare parts should be changed. Also, we must not forget about the possible clogging of the filter, which can be easily replaced by yourself.

Electrolux has been present on the Russian market for several decades. But before it was known to our consumers, mainly due to its quality household appliances. Refrigerators, washing machines, electric water heaters And microwaves from this famous Swedish manufacturer have long won respect not only from the Russian consumer, but throughout the world.

And so, relatively recently, the company began to supply the market, in particular, and geysers Electrolux, reviews of which are both positive and negative. Let's try and disassemble this geyser, using the example of the Electrolux GWH 265 ERN Nano Plus model.

We will try to find the advantages and disadvantages of this model, to understand the principle of operation, having considered it. specifications and device. Based on this instruction manual, everyone will be able to draw conclusions and make their own reviews about the Electrolux geyser, which you can now buy inexpensively, at a low price.

Features of geysers Electrolux

One of the first models on the market was the Electrolux GWH 275 SRN, which had very good reviews from owners and specialists, mainly due to its high-quality European assembly (Spain). IN last years the company supplies two models to the Russian market: Electrolux GWH 285 ERN Nano Pro and Electrolux GWH 265 ERN Nano Plus automatic.

Geyser Electrolux Nano Plus

Model "Nano Plus" outwardly differs from "Nano Pro" by the presence of an informative digital LCD display on the control panel. It displays the water temperature at the outlet of the column, there are indicators of the flow and battery level, which flashes when the gas column does not turn on when the water is turned on.

The display shows errors in the operation of the Electrolux Nano Plus gas column, for example:

E0 - emergency worked temperature sensor hot water;
E1 - low battery level;
E2 - the emergency flame sensor has tripped.

The principle of operation of a gas water heater

When we open the hot water faucet on the mixer, the water flow sensor is automatically activated. After half a second, the information display will turn on, which will show 2 indicators of blue color: "battery" and "shower".

After a few seconds, the flame indicator will light up. After switching on gas burner all indicators are lit, except for the battery indicator, which now simply shows the level of their charge.

When we stop using hot water, turn off the faucet. The flow sensor shuts off the gas supply to the gas burner of the column, all indicators turn off. Only error codes can be displayed in the event of a device malfunction.

Electrolux Nano Plus Geyser Display

Like most gas instantaneous water heaters, the Electrolux GWH 265 ERN NanoPlus geyser consists of gas and water units, a heat exchanger for heating water, a gas burner with stainless steel nozzles and an open combustion chamber.

A feature of the device of the Electrolux Nano Plus model is the presence of a copper heat exchanger that is safe for human health, does not contain oxygen and lead, made according to special technology Oxygen Free.

Let's take a closer look at the scheme, what else can be found under the body of this device.

Electrolux geyser device

2 - hot water outlet

3 - water temperature sensor

4 - LCD display

5 - threaded fitting for connecting the bellows

6 - fitting for draining water

7 - electrode for ignition of the burner
8 - flame ionization electrode

9 - column electronics unit

10 - open combustion chamber

11 - sensor for protection against overheating of combustion products

12 - emergency hot water overheating sensor

13 - heat exchanger

14 - gas burner

15 - rod with a membrane of the water unit
16 - the water unit itself
17 - double battery case
18 - entrance cold water
19 - gas part
20 - branch pipe for gas pressure control

Geyser Electrolux NanoPlus: technical characteristics of the water heater

The rated power of this model is 20 kW and the hot water output is 10 l/min. The column is able to turn on at a water pressure in the pipeline from 0.15 atm., Which is a good indicator compared to the models of the previous generation of Electrolux gas water heaters.

The chimney diameter is 110 mm, and the dimensions of the device are very compact: 55 x 32.8 x 18 cm. The diameter of the pipes for connecting gas, cold and hot water is 1/2 inch. It is possible to transfer the operation of the device from natural to bottled (liquefied) gas.

In addition, this water heater has a built-in burner flame modulator, unlike, for example, a direct competitor - a geyser. This function allows you to set the desired water temperature. We set it once, and the device itself will maintain the temperature set by us. Other parameters and characteristics are indicated in this table.

Technical characteristics of the Electrolux Nano Pro model

1. The column does not turn on.

The batteries may need to be replaced or they are inserted incorrectly, observe the polarity of the batteries.

2. The outlet water does not heat up well, not hot enough.

Try reducing the flow of cold water to the column or increasing the gas supply.

3. Smells like gas in the kitchen or apartment.

Probably there was a gas leak in the pipeline. In this case, you should not look for the cause of the smell of gas yourself, be sure to contact gas specialists.

Advantages of the Electrolux GWH 265ERN Nano Plus geyser:

– compact size
– environmentally friendly copper heat exchanger
- stainless steel burner
- smooth modulation of the burner
– low price from 8500 rubles
- famous brand

Disadvantages of geysers Electrolux:

- Chinese assembly
- poor performance
- narrow the lineup
- hard to find spare parts

Generally, geyser Electrolux Nano Plus is worth the money, despite different reviews. It is modern, has all the necessary functions and good technical characteristics. If you are not embarrassed by the Chinese assembly and its low productivity, then you can safely buy the Electrolux GWH 265 ERN Nano Plus geyser in the stores of your city. Watch video review.

A gas water heater, or, to put it simply, a gas water heater is a device thanks to which we can enjoy comfortable conditions hot water, all year round regardless of centralized water heating. Geyser Electrolux - a common option for providing premises warm water, on a household scale.

But before you make your choice and buy an Electrolux geyser, you should pay attention to design features of this device, the advantages and disadvantages of its operation and the varieties available today.

It should be noted about the high quality of products manufactured by Electrolux. Having a founding date back in the early 20th century, the Swedish company never ceases to delight its consumers with the products it provides, including gas water heaters.

1 The device and purpose of the geyser Electrolux

In order to understand what the principle of operation of the Electrolux systems is, it is necessary to consider the design in detail. An example for this would be the Electrolux gwh 350 rn geyser. The Electrolux gas column device has an energy-intensive design, in a minimalist manifestation.

There are toggle switches on the body, with the help of which the heating power is regulated, as well as the water supply. Electrolux geyser instruction provides throughput device in 16 liters of water per minute.

The geyser Electrolux automatic machine has good versatility, since the outlet chimney connector is 110 mm, which will allow the use of the device, paired with any exhaust system.

If we analyze in detail the design of a gas water heater, we will see the following elements:

• Control block, together with adjustment buttons. (Most models also have a display that shows the water temperature and other necessary information);
• Solenoid valve for geyser;
• Copper heat exchanger;
• Inlets for water and gas;
• Outlet openings for hot water supply, as well as an opening for a chimney;
• Tap for draining water (required when dismantling the device);
• Fasteners.

It is important to point out main feature gas water heaters from the Electrolux company - excellent suitability for operation in the Russian market. This means that they can be operated without fear, even if the pressure in the water or gas supply lines is below average.

Electronic geyser, has the main purpose of supplying hot water. By which, such a device provides proper living and sanitary conditions both in residential premises (apartments, houses), and in offices and industrial buildings.

2 Advantages and disadvantages in the operation of the Electrolux geyser

You can buy Electrolux gas water heaters only after weighing all the advantages and disadvantages. A gas water heater with electric ignition will provide you with the following advantages:

1. Compact dimensions;
2. Ease of installation (with minimal knowledge and experience in plumbing);
3. The presence of a multi-level protection system, in most models of geysers Electrolux. For example, Electrolux GWH 265 ERN NANO PLUS has a 4-stage protection system. The first level of protection is a thrust sensor. It works when there is no draft in the chimney, or when reverse thrust. The second level is provided by a protective thermostat (means for protecting the main components of the device from overheating). Third level safety valve(hydraulic) which controls the water level in the heat exchanger. The fourth level is the control of the ionization of the flame, which is the most important guarantee of the safety of the operation of the geyser, control over the presence of a flame on the burner .;
4. Informative management and control system;
5. Variability in the choice of water pressure and power of its supply;
6. Durability.

In addition, reviews of the Electrolux geyser indicate that during the operation of the device, several characteristic disadvantages of the system can be distinguished:

1. Lack of a water intake tank (water is heated only by a flow path);
2. Electrolux geyser does not ignite;

Lack of traction;

1. Reducing water pressure;
2. Display failure (usually due to mechanical damage).

2.1 Types and differences of geysers Electrolux and reviews about them

The price of an Electrolux geyser fluctuates around 100-150 USD.

The Electrolux company offers its customers, as a rule, geysers with flow heating, which makes them accessible to the general consumer.

Exist the following criteria for selection of Electrolux water heaters:

1. By type of ignition, available today: electric or forced;
2. According to the security system: with a simple security system (single-stage), with a complex one (from two to four degrees);

Also during selection. desired device you should take into account the power (capacity of the device), the diameter of the chimney outlet, the presence of a display, as well as the presence of optional functions.

Analyzing reviews of the Electrolux gas water heater, we can conclude that these devices are well suited for the domestic market, affordable prices, and the possibility of installation in different rooms and operation in a variety of conditions.

2.2 Electrolux geyser overview - video

There are many options for solving problems with hot water supply. In this case, the Electrolux geyser is often used, which is able to cope with its tasks for a long time, even if low pressure. The equipment meets all quality and safety criteria, equipped with various sensors and controllers that monitor the operation of the device.

Technical features

Electrolux water heaters are considered reliable and safe units that can operate both for one and several water intake points. That is why they are successfully used in apartments, private houses, country cottages or office buildings.

All indicators are displayed

The performance of devices depends on the correct choice of model, focusing on personal preferences and needs. Based on the information specified in the instruction manual, it should be noted that all modifications of Electrolux gas water heaters differ in 5 main criteria:

• power indicator;
• type of control;
• type of ignition;
• security level;
• design decision.

To decide on the option, you should study each item in detail and highlight for yourself the main criteria by which the selection will be carried out.

Power

On this moment the company produces modifications of three groups, differing in the level of performance, power:

• low-power - 17-19 kW;
• medium power - 20-24 kW;
• powerful - 25-31 kW.

Each of the options involves working on a certain number of sampling points. For example, low-power ones are able to function with just 1 mixer, medium-power ones - for 2-3, powerful ones - from 3 or more water intake points.

Control

Units with manual method controls have long been considered obsolete, so gas water heater manufacturers have developed updated version. Modern models are equipped with a burner with modulating power.

In priority - elementary control of equipment operation

This aspect controls the temperature regime of water and maintains it at a given level even with a decrease or increase in pressure in plumbing system. Temperature selection will be carried out at an automated level.

Ignition type

The manufacturer of geysers Electrolux produces several series with different types ignition. Modifications come into operation according to one of the following principles:

• manual ignition using a lighter or matches is an outdated method that is practically not used in modern models;
• automatic ignition - carried out from a turbine or batteries, is considered the most reliable, since it starts working only when the tap is opened;
• piezo ignition - this option is used in the Electrolux Nano Pro series and differs in the principle of switching on, you need to press the key.

Versions with the first ignition method are very rare on sale, more often in the secondary market. Automatic ignition is considered the most convenient, but here you will need to change the batteries regularly. Piezo ignition can be inconvenient when turning on the gas column when the user is at arm's length.

VIDEO: How to properly ignite an instantaneous water heater

Security Level

The Electrolux geyser is equipped with a 3 or 4-level security system. In the event of a dangerous malfunction in the form of a gas or water leak, an increase in pressure in pipeline system the emergency shutdown device is activated in the device. Also, the following situations are dangerous for the health of the user:

• the formation of reverse thrust or its absence;
• extinction of the fire in the burner.

It should be noted that the formation of reverse thrust is considered especially dangerous factor in rooms with a chimney. When choosing a chimney geyser, you should pay attention to the presence of an automated shutdown function in its options.

Design solution

The model range of equipment of this brand is diverse in terms of technical parameters, and by the presence of various additional options. But there are also many design choices to be made. For example, the company produces models for conservative personalities with a minimalist style; this series should include a compact modification of the Electrolux Nano Plus geysers. There are more expensive variations, on the front panel of which you can install or change a picture suitable for general style rooms.

laconic performance and small size attract owners of apartments and country houses

But the most popular versions are units with a display that displays all the necessary information about the state of the device and its operation. Also, if a malfunction is detected, an error code is displayed on the screen. In operation, this is a very convenient and practical option.

Popular models of geysers Electrolux

Italian products are in demand all over the world thanks to high quality, durability and safety. Among the abundance of offers, users distinguish three versions of devices.

Electrolux GWH 275-SRN

This is an instantaneous water heater with a water treatment rate of 11 l/min. and a power of 19.2 kW. The design includes a piezoelectric ignition system with open cam combustion. The maximum level of water heating is 68 ° C, a gas control device is used as a security system.

Also available additional function as a limiter temperature regime warming up. There are 2 main adjustment levers on the case, so with the task of how to turn on gas water heater there will be no questions.

Unit Electrolux 275 s classic design sold at a price of 6,000 to 7,000 rubles.

We look at the reviews - the only inconvenience is associated with the need to periodically change the batteries for automatic ignition.

Electrolux GWH 265 Nano Plus

The Electrolux GWH 265 ERN Nanoplus geyser has a low price - 8,500-9,000 rubles, which makes it available to a wide range of consumers. Modification has it all necessary functions to ensure high quality hot water.

The main advantages are as follows:

• compact dimensions;
• modern design solution;
• reliable burner, consisting of stainless steel;
• modulation device;
• low price.

Users also noted some disadvantages. Since the unit is assembled in China, if it malfunctions, it may be difficult to find spare parts. Also, the power of the unit to operate at several water intake points will not be enough.

• User manual for instantaneous gas water heater series GWH 265 ERN NanoPlus

Electrolux GWH 285 ERN Nanopro

The Electrolux 285 Nano Pro geyser is considered a more advanced modification, since it is equipped with 4 security levels:

• hydraulic valve;
• traction controller;
• ionization device for tracking the work of fire;
• device for determining the correct functioning of the unit.

This version has been developed for houses located in regions where there are constant problems with the level of pressure in the centralized gas or water system. The unit is not included in the classification of powerful devices, but at the same time it can function at a low water pressure.

Judging by the reviews real people, electrical equipment is of high quality, reliable, but it heats water excessively, even when minimum values heating and high pressure. Some note problems with the heat exchanger.

Thanks to the average pricing policy for Electrolux devices, each consumer will be able to choose the most optimal modification, not only technical requirements but also cost. With a limited budget, experts recommend giving preference to the option with a minimum number of functions and average power. In order for the unit to provide the desired initial result, it is enough to adjust the pressure of water and gas.

VIDEO: How to fix e0, e1, e2 NanoPlus 265 errors