You can pick up the purchased goods yourself or use the delivery service in Moscow and the Moscow region. Having placed an order today, tomorrow you will receive it at your disposal. If necessary, you can use the service of prompt delivery and receive products today.
Delivery to the entrance (check with the manager about the possibility of raising to the floor)
Delivery is made daily from 9 am to 9 pm including weekends and holidays.
Specify exact terms of delivery at the manager!
Pickup points
Delivery cost in Moscow and the Moscow region:
- Within the Moscow Ring Road - from 0 to 500 rubles, (Individual shipping cost is indicated in the product card)
- Outside the Moscow Ring Road up to 10 km - 700 rubles,
- Outside the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
- In the regions, delivery by a transport company (calculated individually).
Shipping cost for
km from MKAD
700 rub.
Unloading of bulky goods is carried out by the forces and means of the customer.
Money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and ease of calculation.
Payment by bank card to the courier upon receipt
Couriers have a portable bank terminal available, which allows Teplovod-Service customers to pay for goods with bank plastic cards (check with the manager about the possibility of paying with a bank card).
Payment by credit card on the site
To select payment by bank card on the "Cart" page, select the item "Payment by bank card on the site".
Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:
After clicking on the "ONLINE PAYMENT" button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.
Please prepare your plastic card in advance. Additionally, you need to enter the full name, email, contact phone number, as well as the reservation number to identify the payer. The connection with the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.
If your bank supports the technology of secure online payments Verified By Visa or MasterCard Secure Code, you may also need to enter a special password to make a payment. You can check the methods and the possibility of obtaining passwords for making Internet payments at the bank that issued the card.
This site supports 256-bit encryption. The confidentiality of the reported personal information is provided by Sberbank of Russia OJSC. The entered information will not be provided to third parties, except as provided by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.
When paying by credit card, interest is not charged.
Payment is a transfer of funds from the buyer's current account to the seller's account, we work on a common taxation system with VAT. Delivery of goods is carried out after the receipt of funds to the account of the company "Teplovod-Service". This method is used in the calculations of legal entities.
Our details
Limited Liability Company "Teplovod-Service"
OGRN: 1105003006162
TIN: 5003088884
Checkpoint: 500301001
BIC: 044525225
Bank: PJSC Sberbank of Russia
R/s: 40702810838060011732
K/s: 30101810400000000225
Jur. the address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoye highway, 21 km., office B-6
Special conditions
- For any goods sent by a transport company, 100% payment is required.
For goods with the status "On order" worth up to 100,000 rubles. no prepayment required.
For goods with the status "On order" over 100,000 rubles. a 30% deposit is required.
Reviews about the product «Rinnai RB107EMF wall-mounted gas boiler»
There are no reviews for this product yet. Your review will be the first!
Model of a double-circuit gas boiler Rinnai BR-K12 equipped with a closed combustion chamber and wall-mounted. The device is made in a compact size, so it can be installed in rooms with a complex design. The unit is simple and reliable in operation, all component parts of the equipment have been technically tested during factory assembly.
Advantages and features of the heating boiler from the Rinnai trademark of the BR-K series:
- Gas wall-mounted heating boiler with built-in domestic hot water preparation;
- Closed combustion chamber;
- Possibility of changeover to liquefied gas;
- The power of the boiler is regulated by a modulating burner;
- Automatic switching to the mode of preparation of domestic hot water at its consumption from 2.3 l / min. and power control of the apparatus depending on the flow rate and temperature of the heated water;
- Forced removal of combustion products - coaxial chimney through the wall;
- QR code for quick transition to a brief boiler instruction for smartphone users;
- Internal software for status monitoring, parameter setting and troubleshooting;
- Built-in flowing stainless steel plate heat exchanger for hot water heating;
- Electronic ignition and control of all functions;
- Optimum draft is ensured by a continuously adjustable brushless fan of the smoke exhauster;
- Complete gas combustion and minimal NO2 and CO emissions.
Rinnai BR-K are ultra-modern heating boilers from the world famous Japanese brand. The models are characterized by maximum ease of use: modern electronics, which the devices are equipped with, practically do not need the user's presence. All boilers of the family have a built-in plate heat exchanger for organizing hot water supply.
Type of fuel
The types of fuels of heating boilers are divided into gaseous, liquid, solid or a substance that is burned to produce heat.
Among heating boilers, electric boilers can also be placed in a separate group - the most environmentally friendly of all types of boilers.
The cheapest type of fuel in Russia today is natural gas. This is followed by solid fuels, electricity and diesel fuel.
Nominal gas pressure, mbar
Nominal gas pressure (mbar) - gas pressure at which the boiler provides nameplate heat output. In passports for imported boilers, gas pressure is indicated in millibars.
According to Russian standards, low-pressure gas pipelines are used to supply gas to residential buildings. In the gas pipeline, the pressure should not exceed 0.003(0.03) MPa (kg/cm2) or 30 mbar.
The gas pressure supplied to the burner is always indicated in the boiler passport and is regulated during commissioning by service specialists.
Consumption of natural gas, cubic meters / h
Natural gas consumption (cub.m/h) - the amount of gas used by the boiler plant during the operation of the burner.
In addition to the traditional insulation of the building and pipelines, gas consumption for heating can be significantly reduced through the use of boiler automation with outdoor temperature control, boilers with modulating burners and the use of condensing boilers with low-temperature heating systems
flue Ø, mm
Ø chimney, mm - minimum diameter of flue pipes and chimney. This size is indicated in the boiler passport.
Underestimation of the cross-sectional area of the chimney Absolutely forbidden!
With household wall-mounted gas boilers with a fan burner, coaxial (pipe in pipe) chimneys are used, which allow fresh air to be supplied to the boiler and exhaust gases to be removed from the boiler.
Mounting
Boiler installation includes:
Installing and fixing the boiler in place;
Connecting the boiler to a central chimney or connecting a wall passage kit;
Connecting the boiler to heating pipes;
Installation of protective equipment (safety group, expansion tank)
Installation of a coarse filter;
Drain valve installation;
Make-up line connection;
If necessary, installation of a boiler pump, mixing pump, hydraulic separator, distribution manifold;
If necessary, partial assembly / disassembly of the boiler
Installation and connection of one heating group (each subsequent - 5000 rubles);
Filling the heating system with coolant;
Pressurization of the heating system.
Water heater installation includes:
Installing and fixing the water heater in place;
The device of a direct loading line from the boiler with its own pump;
Connecting the water heater to cold and hot water lines;
Arrangement, if necessary, of a recirculation line;
Installation of protective equipment (safety group, expansion tank);
Drain valve installation;
Installation of valves and instrumentation;
If necessary, install a heat-insulating casing;
Filling the water supply system with water;
Filling the heat exchanger line with coolant;
Pressure testing of heating and water supply systems.
Commissioning
Commissioning works include:
Checking the correct installation of all equipment
Checking the system for leaks
Grounding check
Connecting the boiler to the gas main (diesel)
Installation and wiring of weather-compensated automation (if available, additionally 6,000 rubles + 1,000 rubles for each additional circuit)
Automation setting
Setting the combustion process
Checking and adjusting the operation of the boiler in all modes
Commissioning also includes a detailed briefing of persons responsible for the operation of the boiler plant.
After commissioning, the equipment is put under warranty.
Annual service
Service includes :
Diagnostics of boiler equipment
Make-up of the system, pumping of expansion tanks (if necessary and if service valves are available)
Cleaning the combustion chamber of the boiler unit
Control and adjustment work on the burner
Control and adjustment work on the automation system
Mud filter cleaning
Prompt service on emergency calls of the Customer (departure, diagnostics, repair)
The cost of annual service includes the cost of the listed works and does not include the cost of spare parts, which are supplied free of charge under warranty or for a fee. Annual maintenance is a prerequisite for maintaining warranty obligations.
Choosing a heating system, the owners of private houses and small cottages are increasingly opting for wall-mounted gas boilers. They are quite compact, inexpensive, and a 12 kW device is enough to heat a room of about 120 square meters.
Classification and characteristics of wall-mounted gas boilers
Wall-mounted gas boilers are classified according to a number of criteria:
- by appointment: single-circuit - exclusively for heating, double-circuit - for heating and hot water;
- by type of heat exchanger: plate, bithermic;
- by type of burner: atmospheric single-stage, two-stage (with smooth modulation), pressurized (fan);
- by type of boiler: volatile, non-volatile;
- by type of combustion chamber: closed, open;
- according to the method of exhaust gases output: with forced draft, with natural draft.
Each of them has its own characteristic features. For example, boilers with an open combustion chamber require a mandatory connection to the chimney and are only suitable for detached houses. But models with forced draft can even be placed in apartments, since their installation requires only a small hole in the wall.
It should be borne in mind that in the case of connecting a low-power double-circuit boiler, heating losses are possible. At the same time, for houses with a small area, they will be insignificant. But saving on resources will positively affect your budget.
Why is it profitable to buy mounted boilers in the MirCli online store?
For more than 10 years, our company MirCli has been a leading supplier of heating devices in the Russian market. The catalog contains models of heating equipment from leading brands - Bosch, Ferroli, Leberg, Wolf, Termomax and many others.
The company's branches are located in 30 major cities of the country, including Moscow. In addition, we deliver goods throughout Russia, as well as to Belarus and Kazakhstan. Buying a domestic boiler at the best price is not difficult - just call the sales department or place an order directly on the website.
