Operating manual scher khan 5. Programming the Scher-Khan car alarm keyfobs. Purpose of the buttons on the key fob-communicator

Scher- Khan Magicar V - one of the past generations of the popular alarm system, combining security, control and boost performance characteristics car features. Scher-Khan Magicar V is one of those types of car alarms that have feedback carried out using the remote control.

The Scher-Khan Magicar V alarm is controlled remotely using a key fob with a display located on it. The key fob allows you to remotely control the alarm functions using several keys on the key fob (I, II, III, IV), various combinations of buttons and the length of pressing - short presses (0.5 sec) and long ones (2 sec).

Setting the time on the key fob

Setting the exact time on the key fob display is necessary procedure in order to be able to start the car engine on a timer in automatic mode. Since when the power is turned off exact time is reset, then the installation is carried out not only before the start of operation, but also when replacing the battery.

Setting the exact time on the key fob consists of several steps.

1. It is required to press a combination of buttons II and III. The duration of pressing is 2 seconds. After that, the programming mode is entered, about which the owner is notified by a sound signal from the key fob, a flashing alarm and a special symbol on the display.
2. Next, press the I button and hold it for 0.5 seconds. Thus, the mode of setting the exact time is activated, confirmed by a sound signal. The display of the device shows the current time flashing.
3. Next, the exact time is set. With button I you can change the hour, with button II you can change the minutes. To change by one step, you must hold the desired key for 0.5 seconds.
4. The last stage is the exit from the programming mode, which is carried out by pressing the combination of keys II and III. Exit from the mode is confirmed by a sound signal.

Reset to factory settings

Errors in self-programming of alarm functions may require a rollback to the factory settings. Resetting the programmable alarm functions to factory values ​​is carried out in 2 stages.

1. At the first stage, you should enter the programming mode - press buttons II and III simultaneously and hold them for 2 seconds.
2. At the second step, you need to press button III on the key fob three times (0.5 seconds each). Each press is accompanied by a flashing "emergency gang" and a sound signal. After a short period of time, 3 beeps should sound, it will also flash three times. alarm. Thus, the owner is notified about the reset of the function programming settings to the “default” settings.

Engine starting

The Scher-Khan Magicar V alarm allows you to start the car engine using the remote control. To do this, press button II of the keyfob and hold it for 2 seconds (long press). In this mode, the alarm goes into armed mode, the car doors are locked, and the engine starts. The duration of the motor can be programmed for different time periods:

• 5 minutes;
• 15 minutes;
• 25 minutes;
• 45 minutes.

The engine start is accompanied by several indicators confirming the successful execution of the request:

• siren signal
• key fob sound signal;;
• flashing "emergency gang";
• 5-fold headlights on the key fob display

If the engine start fails, the system will retry a maximum of 2 more times. If after them the engine start is not possible, then the alarm goes into normal mode.

In order to start moving the car, the driver, with the engine running from the key fob, needs to open the doors, insert the ignition key and turn it to the ON position. To do this, the driver has 20 seconds after opening the doors. If during this period the key is not turned to the desired position, the system will automatically turn off the engine.

The alarm may not start the engine for several reasons:

• the motor is already running;
• the ignition is already on;
• the doors or trunk are open;
• the reservation mode for vehicles with manual transmission has not been performed (the control lever has not been moved to the neutral position).

Therefore, in order to automatically start the engine, the driver of a car with a manual transmission must first, after stopping:

• set the gearbox lever to the "Neutral" position without turning off the engine;
• close the hood and trunk;
• press button II on the key fob;
• turn the ignition key to the off position and pull it out (the engine will continue to work);
• get out and slam the door (the engine will stall).

Autostart Programming

The Scher-Khan Magicar V alarm system allows automatic engine start in various modes:

• every 2 hours;
• every 24 hours.

Starting the engine every 24 hours allows you to start the engine at the same time every day, which is convenient, for example, for warming up in the morning. Starting every 2 hours allows you to maintain the temperature of the engine and interior on cold days or, conversely, to cool the interior in the summer season. Both timer modes cannot be used at the same time. The choice of the autostart mode is made through the menu of programmable functions.

To program the autostart every 2 hours, briefly press the buttons II and IV. In this case, the engine will automatically start 2 hours after pressing. Setting the time is not required in this case.

To automatically start the engine every 24 hours, you must first set the exact time on the key fob, if it is not set. (how to do this - see above). The automatic start of the motor is set as follows:

• you need to press buttons II and IV and turn off the Timer mark;
• select start time using keys I and II;
• press the II and IV keys again and turn off the Timer label.

When the engine is automatically started, the key fob display shows a countdown until the moment when the engine is turned off.

Auto start by temperature

Automatic start can be set when a certain air temperature is reached, which is determined by temperature sensors installed in the vehicle interior. Temperature autostart can only be used in combination with timer autostart. To set autostart only when a certain temperature is reached, you must:

• select auto start by timer;
• turn on temperature control - press the IV button 21 times;
• choose the required temperature regime(key II - -15 °C, key III - -25 °C, button IV - +60 °C);
• turn on the autorun mode by timer (see above).

How to register a keychain?

The Scher-Khan Magicar V alarm can "remember" 3 different key fobs. To sync new keychain with an alarm you need:

• turn the ignition key three times from the OFF position to the ON position - the emergency flasher should flash 1 time, confirming the entry into the programming mode;
• no later than 4 seconds after the flash, you need to press the I key on the new key fob;
• then you need to enter the key fob code into memory processor unit alarms.

The memory of the processor unit can store data of only 3 key fobs, so when the fourth key fob is registered, the code of the first one is deleted from the memory.

You can exit the programming mode without taking any action within 4 seconds after writing the last digit of the code.

How to turn off the alarm?

To disable security functions the system provides a special VALET mode. The deactivation function is necessary, for example, when transferring the car to the station after-sales service to prevent an alarm. To switch to the VALET mode, a short press of the I and III keys is enough. You can also turn on the mode with the ignition key - just like when registering a new key fob, you need to turn the key in the cell from the OFF position to the ON position three times, that is, enter the programming mode. Further, no action should be taken for 4 seconds, after which the system will automatically switch to VALET mode.

In the VALET mode, the function of opening / closing the doors is saved, for which you need to briefly press the button I. Exit VALET mode can be done by pressing the key combination I and III.

Shock sensor adjustment

The shock sensor notifies the owner of the car about an incident with the car while the car is parked with the alarm on.

Scher-Khan Magicar V alarm sensors are two-level: with a weak impact, a 4-time beep sounds and an alarm flashes 4 times. At strong blow the key fob goes into alarm mode, lasting 30 seconds - 30 flashes of the "emergency gang" and 30 short beeps. Shock sensors can be turned on or off by pressing the combination of buttons I and III and holding them for 2 seconds.

Adjusting the shock sensor helps to avoid false alarms from the accident warning sensor, since with a sensitive sensor, even the passage of a neighboring car can be falsely perceived by the system as an emergency impact. To adjust the sensitivity of the sensors, physical access to them is required; you can find out about the location of the shock sensors at a service station. Regulators are installed on the sensors themselves, turning clockwise increases sensitivity, counterclockwise - reduces until the sensor is completely turned off.

To set autostart from keychain Scher-Khan magicar 5, press button 2 on the key fob and hold it down for more than two seconds. With this manipulation, the car will be set to armed mode with the engine running, the doors will be locked, and after that the engine will be started. If the engine is started successfully, then the key fob will display information about how much time is left for the engine to run before stopping (it is most convenient if the time interval is programmed in minutes - from 5 to 45 minutes). If the launch has taken place, then in the distance you can see light smoke from the exhaust pipe.

To start a trip, during the set autostart interval, when it has not yet expired, open the driver's door, insert the ignition key into the lock and switch it to the position that corresponds to the inscription on the ignition on. All these actions must be done in no more than 20 seconds, if you delay in time, the ignition will not turn on and the engine will be turned off. As you understand, this is provided to prevent malicious attempts to steal your car.

If the launch fails, the Sherkhan Magikar 5 system will make a second and then a third attempt to start the engine. If all three attempts to start did not take place, then the security system will stabilize in standby mode. To re-initiate the autostart function, you must first make sure that the engine is working.

Why autorun Scher-Khan magicar 5 does not work

Possible reasons for autorun failure are as follows:

• discharged battery;
• the temperature outside the window in winter has reached a critically low level (preventing the easy operation of this function);
• other ICE systems could malfunction, making it difficult to start the engine;
• car electrical failure
• problems are related to the immobilizer, which prevents autorun;
• the indicator shows smoke, although the engine did not start, so the system does not attempt to start 2.

If, when the key is flogged, the ignition works, and the auto start from a distance does not work, then you need to reprogram it, you can try to do the following - make the start periods shorter and set the response temperature higher.

How the Sherkhan Magikar 5 alarm works during launch:

When it is not possible to set to autorun:

• with the ignition off;
• if not all car doors are closed;
• if the motor is already running;
• in cars with mechanical transmission - if the "redundancy" mode is not active.

If the remote start is successful, then the corresponding systems behave as follows:

When the engine is automatically stopped, the systems behave as follows:

How to set the warm-up interval for autorun Sherkhan Magikar 5

To get started Scher-Khan installation magicar 5 in time, simultaneously with two fingers, press the first and second buttons on the key fob and hold the buttons like that for some time. (The autostart interval is possible 2, 4 or 6 hours - which specific value to choose depends on the condition of the battery and engine.)

1. Briefly press the Roman buttons 2 and 4 once without holding them down - this will turn off the timer.

2. Press the Roman button 4 13 times (after each pressing, the siren will confirm), then wait until the siren confirms the received signals 13 times.

3. It remains to select the autorun interval: to set autorun after two hours, press the Roman button 4, so that after 4 hours, press the Roman 3, after 8 hours, press the Roman 2.

4. Finally, finish the auto-start setting by turning on the timer by pressing Roman buttons 2 and 4 once and immediately releasing them.

How to set autorun Sherkhan Magikar 5 by temperature in the cabin

1. First, in a way already known to us, you need to turn on the autorun mode by time - to do this, press button 4 13 times (after each press, the siren will confirm), and then wait until the siren confirms the received signals 13 times.

2. Switch to programming mode. To do this, simultaneously press two fingers on the first and second buttons on the key fob and hold the buttons like that for some time.

1. Deactivate the timer (if it is not already off) by briefly pressing buttons 2 and 4 simultaneously.
2. Press 21 times on the Roman button 4 - the siren should turn on.
3. Wait until the siren sounds 21 times, and then proceed to the temperature selection.
4. To turn on autostart at minus 25°С, press button 3, at minus 15°С, press button 2.
5. Restart the timer? by pressing buttons 2 and 4.

How to program the warm-up duration

The warm-up time on the Sherkhan Magikar 5 alarm can be selected in the form of specific time periods in minutes (5, 15, 25 or 45 minutes).

1. First you need to turn on the programming function by simultaneously long pressing buttons 1 and 2.
2. Press button 4 12 times, each press will be accompanied by an audible confirmation, and the final confirmation of programming is 12 siren sounds in a row.
3. It remains to set the warm-up time. To warm up for 45 minutes, press button 4 to 25 minutes. – button 3, 15 min. – button 2 and 5 min. – button 1.

How to program autostart by on-board voltage

You can program auto start, in case the battery is discharged to 11.5 volts.

• Enter the time trigger mode by pressing button 4 13 times.
• Activate the programming function by simultaneously long pressing buttons 1 and 2.
• Press button 4 20 times without stopping, after which the siren will also sound 20 times.
• Press button 2 - in this way you will turn on the autostart operation mode by battery voltage.

The most common problems with autorun

1. The “Valet” mode is activated when the car is urgently disarmed (zzzz signs appear on the key fob). To solve the problem, you need to, with two fingers at the same time, press buttons 1 and 3 for more than 2 seconds.
2. When the ignition is off, the car does not stall. The doors are locked, and in order to deactivate autorun, you need to activate the car's doors. To get out of this situation, you need to use button 2 to perform functions from 1 to 16. To turn off the engine, you must turn the ignition key to the "Ignition Off" position.
3. If you urgently need to remotely turn off the engine when autostart is running, then press button 2 and hold it.

Video: Setting up the autostart alarm Scher Khan magicar 5 on a manual transmission

Video: The car does not start with the Scher Khan magicar 5 alarm. Finding the cause

If the video is not showing, refresh the page or

Today, anti-theft systems are very popular among owners of various vehicles. Thanks to latest developments highly intelligent car alarms prove their effectiveness. Their installation makes driving safe and comfortable.

What are the main features of the presented system are very popular today, experts' reviews will help to understand. Having studied the instructions from the manufacturer, as well as the recommendations of experts, you can be sure of the safety of your car.

Main characteristics

Auto which in without fail studied by the user before starting work, is a popular anti-theft system. It is known for its versatility and reliability. The alarm software is compatible with almost all transmissions that are installed in modern vehicles.

Experts say that this is one of the most reliable and effective systems that are on the auto market today. "Sherkhan Magikar 5" was created on the basis of a vehicle. Information about its status is displayed on the LCD key fob display. A clear interface, ease of setup allows the user to fully control the state of their car systems.

Alarm "Sherkhan Magikar 5", instruction which will allow you to use existing functions fully, has a whole list of built-in programs. They improve the safety of the car, the driver and all participants. traffic. Some programs increase the comfort of use vehicle. The first of these is the autorun function. However, this is far from the only program that improves driver comfort.

Each vehicle owner can choose a specific set of commands for himself. To do this, it is important to carefully study the instructions, as well as the advice of specialists. This will highlight the most appropriate list of system functions.

Peculiarities

Wiring diagram "Sherkhan Magikar 5" presented in the manufacturer's manual, which is supplied with the device. She is quite complex. The alarm involves installation in the engine compartment of the car. In order for all systems to work correctly, it is better to entrust this work to a specialist. Only in this case, you can be sure that the software will work without failures. Special companies give a guarantee for the installation of car alarm components.

"Sherkhan Magikar 5" is compatible with gasoline or diesel engines. Its versatility allows installation on almost all modern machines. The limitation set by the manufacturer applies exclusively to the voltage in the wiring. It should be 12 V. This ensures stable operation of all system components.

A computer installed in the car collects signals from sensors. They are mounted in the main systems of the car. After processing the received data, the on-board computer transmits information to the key fob of its owner. The remote control has a liquid crystal display.

This allows the driver to understand the state in which this moment are the systems of his car. If necessary, he gives commands to the software at a distance. The signal range in open areas is about 1.5 km. The car should be parked in an open area. Houses, tree branches and other obstacles can delay the signal and reduce its range. The driver must see his car.

Expert reviews

Signaling "Sherkhan Magikar 5" has a lot of advantages. High manufacturability, ease of operation make it in demand. Experts say that when correct installation this system is different high level reliability. All of its sensors have a special protection class. The antenna and processor are also completely closed from unauthorized entry inside software. If desired, the installation of the system can be done independently. However, experts argue that this increases the likelihood of a user making a mistake. This compromises the reliability of the equipment.

A loud siren is installed in the engine department. It has virtually no failures. All components of the system were manufactured using the latest scientific developments. Thanks to the unique standards that were used in the development and creation of the alarm system, Sherkhan Magikar 5 is considered one of the most high-tech, intelligent systems protection. During the manufacturing process of all components, testing is carried out at all stages of production. This ensures high reliability of the system.

"Sherkhan Magikar 5", price which is about 5-6 thousand rubles, belongs to the middle segment of security products. This product is available to almost everyone. Separately, you can purchase a keychain with an LCD display for 1.2-1.4 thousand rubles. Removable covers are also sold separately. Their cost is about 300 rubles. They help protect the remote control from scratches. Availability additional elements The presented alarm system allows each car owner, if necessary, to update his security system.

Beginning of work

Alarm "Sherkhan Magikar 5", installation and the operation of which must be carried out exactly according to the recommendations of the manufacturer, is considered a simple, understandable system. Before starting work, you must carefully study all the provisions of the instructions. Experts recommend immediately highlighting those functions that will be used by the driver. This will simplify the process of remembering and managing the device. After completing this task, you can start working with the security system.

First of all, you need to insert the battery into the remote control. It comes with a keychain. After installation, you can turn on the remote control. It has 4 buttons and a display. The set of functions includes a vibrating alert, automatic backlight. The screen displays information about the state of charge of the battery and the temperature in the passenger compartment of the car.

By pressing certain combinations of the available 4 buttons, you can set various commands control unit. Signal transmission encoding is highly reliable. She is unique. Any other remote control, even from a similar system, will not be able to control the car alarm.

The key fob must be linked to the system. The package may also include additional key fobs. They also need to be registered in the program memory. Moreover, this procedure is performed simultaneously for all remotes. You can overwrite if necessary.

Arming

Alarm setting "Sherkhan Magikar 5" carried out in accordance with established rules. First of all, experts recommend mastering security mode. To do this, you need to turn on the alarm. All vehicle doors must be well locked. Glass should be raised to the stop. The driver must check that the trunk and hood are closed.

If all the doors and windows in the car are tightly closed, the user presses the first button on his main key fob. The locks should be locked at this point. It also disables the starter. Keychain alarm "Sherkhan Magikar 5" it will emit a special signal. The siren will also produce the sound provided by the program. The machine must turn the headlights on and off 5 times.

The interior indicator will light up. If it flickers with a certain frequency, this indicates the successful activation of the security mode. Periodicity light signal LED should be once per minute.

If the driver did not close the doors tightly, did not fully raise the windows or open the trunk, the key fob will beep 3 times. The siren will also emit 3 beeps. This needs to be monitored closely. If the indicator does not light up, then it is necessary to check the operation of the system. This will help you avoid trouble in the future.

PIN code programming

Understanding the issue how to set up "Sherkhan Magikar 5", you must also consider the procedure for setting a special password for the system. It may be required if, due to certain circumstances, the driver cannot disarm the alarm. The on-board computer may in some cases not respond to the key fob signals.

The driver sets the password himself. It can be two or four digits long. Each code element can be set from one to four. To program a password, the vehicle owner must follow a specific procedure.

First, the security mode is disabled. Next, the driver must open the car and insert the key into the ignition socket. It is turned to the ON position. The motor remains off. On the remote control, you must simultaneously hold down the second and fourth buttons. The siren will sound once and the headlights will turn on and off.

You should press any button on the key fob. This procedure must be done within 4 seconds. The button number specifies the first digit of the code. After that, an identical number of signals will sound. The remaining digits of the password are set in the same way. After completing the procedure, the system will exit the setup mode. The siren will sound twice, the headlights will flash twice.

Disarming

Alarm "Sherkhan Magikar 5", instruction which examines in detail all cases of disarming, in rare cases does not turn off in a standard way(for example, a key fob is lost). In this case, you must enter the previously set password.

We need to open the car. The siren will sound an alarm. Three times the key is turned in the ignition from the OFF position to the ON position. The siren will stop. Within 4 seconds, the key must be turned the number of times corresponding to the first digit of the code. The headlights will turn on and off once. Then the remaining digits of the password are entered.

The block will be removed. If the password is entered incorrectly, the alarm will turn on again. Therefore, the password to the system should be remembered accurately.

Autostart security system

A few more settings to learn alarm "Sherkhan Magikar 5". How to set up autoplay? The manufacturer's recommendations will help. This is a convenient program that allows you to increase the comfort of driving.

To enable it, the driver must close all the doors of the car and turn on the security mode. Next, you need to activate the autorun function on the key fob. It will turn on the security mode on its own. This feature improves system reliability. If the driver forgets to turn on the security mode, when the auto start is on, the alarm will block the car in 30 seconds.

Information about the inclusion of autorun is displayed. The screen should show the word PASSIVE. Every 10 seconds, the system transmits data on the state of the armed mode to the display.

Auto engine start

Autorun "Sherkhana Magikar 5" produced in time. It is possible to set the engine start period by temperature or battery voltage. However, these functions are secondary. They cannot be started without programming an auto start time.

To enable the mode, you must turn off the security mode, ignition, open the door. The engine can be started every two, four or eight hours. At the same time, the first and second buttons of the key fob are clamped. Next, you need to press the fourth button 13 times. The siren beeps every time. If you press the second button, the engine will automatically turn on every 8 hours. The third button sets the frequency once every four hours, and the fourth - once every two hours.

Auto start by battery temperature and voltage

Has additional features alarm "Sherkhan Magikar 5". How to set up autoplay motor temperature and on-board voltage, we will tell you now. To do this, follow a sequential procedure.

You need to enter the program mode by pressing the first and second buttons. To set the auto start function by temperature, you need to press the fourth button 21 times. The siren will make an appropriate sound each time. If you press the second button on the remote control, the motor will start at an interior temperature of -15 ºС. The third button corresponds to the level -25 ºС, and the fourth one -60 ºС. Next, the timer is turned on (press buttons two and four).

In some cases, the driver wants to turn on auto start to limit the start of the engine when the voltage drops in onboard network. To do this, as before, enter the programming mode and press the fourth button 20 times. To activate the timed engine start restriction mode, press the second button on the key fob.

Certain management features are different alarm "Sherkhan Magikar 5". How to set up autoplay turn on the security mode and other functions, you now know. In this case, the reliability of the system will be high.

Programming the Sherkhan 5 key fob may be needed in the following cases:

1. The alarm does not turn on and off from one remote control, others work fine.
2. Hull damage or printed circuit board switch.
3. Incorrect operation of the main unit and remote control.
4. Use of additional key fobs.

Three pagers can be stored in the memory of the anti-theft system. This is not difficult to do, but the procedure has its own characteristics.

Binding a new key fob to the Scher Khan Magicar 5 alarm

The instruction manual will help you to record a new communicator into the memory of Magikar 5. Please read it carefully before performing any operation on the remote control.

The key fob of the anti-theft system can be programmed only when the security mode is disabled. If you are connecting new remotes, do not forget to overwrite the old ones, otherwise they will be deleted from the system memory.

1. For four sec. switch the ignition on and off three times. The lights will flash once. The programming mode has been entered.
2. Enter the remote control code by pressing button 1. This must be done within four seconds. The vehicle lights will turn on once.
3. If necessary, record the following switches in the same way.
4. Do nothing for four seconds after programming the last remote control and the system will automatically exit the settings.

Firmware and reprogramming Sherkhan 5

You can reflash the Magikar 5 version keychain using a PIN code. Record remote control codes by following the instructions below.

1. Turn the ignition key from "Off" to "On" three times within four seconds. Switch off the ignition.
2. Switch the ignition back on within four seconds. The number of inclusions must match the first value secret code. The light optics will light up once, confirming that a second value can be entered.
3. Turn on the ignition. The number of inclusions must correspond to the second digit of the code. The "emergency" flashes once, confirming the correct action.
4. Enter the rest of the secret number in the same way.
5. After entering all the numbers, press button 1 of the switch. The lights will flash once, confirming the pager entry. After four seconds, the system will exit programming mode.

An additional Magicar 5 keychain is not prescribed: reasons

There are frequent situations with the anti-theft system communicator when it is not programmed. There are a number of reasons for this:

• the remote control is damaged;
• the "Jack" mode is activated;
• the system does not recognize the "ignition on" command.

If it is not possible on your own, having tried all the options, register the key fob, you should replace it with a new one or contact the service center.

Autorun setup instructions

Starting the engine is a very convenient function of the security system. Having carefully studied the instruction manual, every motorist will be able to start the car from the key fob on their own. Before programming, disarm the car, turn off the ignition, turn off the " free hands”, just in case, open one door.

Time setting.

1. To enter programming, simultaneously hold down keys 1 and 2.
2. Enter the timed autorun settings by pressing button 4 thirteen times. After each press, the system should emit a single beep.
3. You take right time auto start: button 2-8 hours, 3-4 hours, 4-2 hours.
4. Then start the timer by pressing buttons 2 and 4 at the same time. The display will show the “timer” symbol.

Automatic start of the engine by temperature.

1. Enter programming mode: buttons 1 and 2.
2. Press the 4 key twenty-one times.
3. You take required temperature: key 2 - (-15), 3 - (-25), 4 - (+60).
4. Start the timer by pressing 2 and 4 at the same time. The display will show “timer”.

How to remove the Jack mode without a keychain

On the Sherkhan alarm, it is quite easy to accidentally turn on the “Valet” mode by accidentally pressing it. Very often this is mistaken for a system breakdown: the alarm does not respond to shocks, autostart fails, key fobs are not programmed, the LED is constantly on. Only central locking and trunk opening works.

To turn off the "Jack" without a key fob, use the multifunctional button located in a prominent place.

1. Turn on the ignition, do not start the engine.
2. Hold down the multifunction key for two seconds. "Valet" is disabled.

Are all Sherkhan Magicar 5 keychains interchangeable?

The alarm panel is such a thing that is constantly lost, forgotten, broken, falls into the water. It is not possible to connect a second key fob due to its absence. Replacement with the original remote is also unrealistic. You have to look for a family communicator more or less compatible with yours. The pager may be completely, partially, or not at all. The compatibility of key fobs of the Sherkhan Magikar 5 anti-theft system was considered by us.

Video help to activate remotes

Press and hold for 2 sec. key fob button III, after which the trunk will open. If the system is armed (doors locked), it will disarm, the doors will unlock, and the starter will be disabled. To implement this function, it is necessary to have a trunk lock solenoid connected to the corresponding output of the main unit of the system car alarm.

When opening the trunk:

Checking System Status [Button (IV)]

If you need to check the status of the system, briefly press the button IV of the keyfob-communicator. Information about the state of the system will be shown on the keyfob-communicator display, as well as confirmed by siren and alarm signals.

When checking the status of the SCHER - KHAN V car alarm system:

When checking the status of the car security system, the current time indicator shows the temperature value in the car interior. The temperature can be displayed in either °F or °C.

The temperature inside the car is 10°C.

Repeated short pressing of the button IV of the keyfob-communicator within 6 seconds after the first one allows you to view information about the car battery voltage in volts.

The voltage on the car battery is 13.9V.

Panic Mode or JackStop™ (anti-grab) [Button (IV)-]

When you press the button IV of the key fob for 2 seconds. The car alarm system will go into Panic mode or JackStop™ mode (protection from hijacking) - programmable function 1-4. The siren will sound for 90 seconds, the alarm will flash for 90 seconds. The "Panic" mode stops the automatic engine start mode. After 90 sec. the car security system SCHER - KHAN V will switch to the armed mode until it is disarmed by the key fob or emergency shutdown mode. Panic mode can be stopped with a short press of the I button. Panic and JackStop™ modes are used in case of danger or when it is necessary to draw attention to the vehicle.

When activating Panic and JackStop™ modes:

Differences in the "Panic" and JackStop ™ algorithms (depending on the selected value of the programmable function 1-4):

ATTENTION!

Jack Stop Mode™ should only be used in an emergency. It is not a regular constantly used STSTS mode, because. it provides for stopping the engine while driving. When choosing one or another mode of the SCHER - KHAN V car alarm, consult with a specialist.

Siren Silence [Button (1+11)]

By briefly simultaneously pressing the buttons I + II of the key fob, you can turn on or turn off the siren signals. In this case, the key fob signals and alarm signals will work as usual. The presence of the symbol serves as an indication of the inclusion of the siren. on the key fob display.

When the siren is turned on:

When turning off the siren signals:

VALET mode [Button (I+III)]

To disable the security functions of the SCHER - KHAN 5 car alarm system and when transferring the car to a service station for maintenance, you can use the VALET mode. To do this, briefly press the buttons I + III of the key fob.

In VALET mode, you can control the locking and unlocking of the door locks. To lock or unlock the locks, briefly press button I.

The VALET mode is shown on the display with the symbol

To exit the VALET mode, briefly press the buttons I + III of the key fob

When VALET mode is enabled:

When turning off VALET mode:

Disabling the two-level shock sensor [Button (I+III)]

You can turn off the two-level shock sensor of the SCHER - KHAN 5 car security system. Press and hold for 2 seconds at the same time. buttons 1+ III of the key fob, as a result, the sensors will be turned on or off. The indication of the sensor disconnection is the symbol on the key fob display. Switching off the sensor is necessary if you leave the car where false alarms are possible (the car is parked near tram tracks, a child or an animal remains in the car).

When the shock sensor is disabled:

When you turn on the shock sensor car alarm SCHER - KHAN 5:

The shock sensor is called two-level, because it has two levels of response from the impact on the car.

In case of a weak impact, the car security system warns with 4 short siren sounds and 4 alarm flashes. Key fob - communicator gives a short tone signal, the symbol of impact on the car flashes on the display. If the impact is strong, the system goes into alarm mode for 30 seconds.

Central locking control for turning the ignition on and off [Button (I + IV)]

By briefly simultaneously pressing the buttons I + IV of the key fob, you can turn on or off automatic control central locking (CL) for turning the ignition on and off. If the function is enabled, the door locks will be automatically locked after 30 seconds. after the engine is started and all doors, the hood/trunk will be closed. The locks are unlocked immediately when the ignition is switched off. The function activation is indicated by the presence of a symbol on the key fob display.

When the central locking control function from ignition is turned on:

When the central locking control function is turned off from the ignition:

Passive arming [Button (II+III)]

The passive arming function can be turned on/off by briefly pressing the buttons II+III of the key fob. When passive arming is enabled, the car security system will automatically arm itself after 30 seconds. after closing the last door or after disarming with the key fob. The system warns of passive arming with alarms and (or) siren every 10 seconds. If within 30 sec. doors (hood/trunk) were opened, the system will arm itself in 30 seconds. after closing the doors (hood/trunk).

When passive arming is enabled:

When turning off passive arming:

Setting the timer to automatically start the car engine [Button (II + IV)]

Briefly press buttons II + IV of the key fob to turn the engine start on or off by timer. The presence of the label "TIMER" serves as an indication of the inclusion of starting the engine by timer; on the key fob display. The system provides two modes of starting the engine by timer. The first mode allows you to start the engine every day in advance set time, the second mode allows you to start the engine periodically, every 2 hours to warm up (or cool the interior in countries with a hot climate). Two modes cannot be used at the same time, the mode you need can be selected by programmable function 2-3.

To automatically start the engine by timer at the right time (24 hours), it is necessary to make a reservation for this mode. For this:

1. Press the buttons II + IV and turn off the label - TIMER

2. Select start time (table)

3. Press the buttons II + IV and turn off the label - TIMER

In order to enable or disable the engine start by timer every 2 hours, briefly press the buttons II + IV of the car alarm key fob. Setting the start time in this mode is not required, the first engine start will occur 2 hours after the mode is turned on.

When the timer engine start is enabled:

When turning off the engine start by timer:

Note: Automatic engine start timer every 24 hours is useful for starting the engine daily at certain time if your car is parked outside the range of the car alarm key fob.

ATTENTION!

The start time of the car engine according to the 24 hour timer can be shifted up to ± 2 minutes per day.

TURBO mode [Button (II + IV)]

If the car has a Turbo - engine, then after long work at high speeds it is not recommended to stop it immediately. The engine should idle for some time to cool the turbine. To do this, the SCHER - KHAN MAGICAR V system provides a TURBO mode (turbo timer). If the TURBO mode is on, then at the end of the trip the engine will run for 2 minutes. To enable or disable the TURBO mode, briefly press the buttons III + IV of the key fob.

When TURBO mode is enabled:

When turning off the TURBO mode:

To activate the mode at the end of the trip, do the following:

1. Put the gear lever in neutral or "P" position.

2. Turn the key in the ignition lock from the ON position to the OFF position. The car engine will continue to run after this for another 2 minutes.

3. Get out of the car, close the doors. As soon as the doors are closed, the alarm will flash.

Now you can put the car alarm system into car security mode. The engine will then run until the expiration of 2 minutes. interval. When the car is armed, the door, hood/trunk sensors, the driver call sensor are immediately armed, and the shock sensor will start working after the engine stops. The engine will be immediately stopped when the door, hood/trunk sensor is triggered, and the system will go into alarm mode. If necessary, you can urgently stop the engine by pressing for 2 seconds. key fob button II.