Together with the production process, the installation of metal structures is a defining step for the formation high performance reliability, strength and durability of the structure.
Installation price metal structures determined depending on the following factors:
- Building area. When installing metal structures, the price per square meter will be reduced with an increase total area premises.
- Types of facilities and level of complexity (in any case, installing a garage will cost less compared to a shopping or industrial complex).
- The pricing policy of the company.
- Weight of metal structures. The cost of a building depends on total weight mounted frame.
- The location of the object. When installing metal structures, the administrative location of the building, the amount of expenses for the delivery of equipment and the transportation of workers are always taken into account.
- Availability of necessary infrastructure. For the installation of metal structures, provides big influence the availability of the necessary communications for work: the ability to connect to the network, roads for the passage of equipment, regardless of weather conditions.
- Order fulfillment deadlines. If the work needs to be done faster, then it becomes necessary to use additional teams, increase the amount of special equipment used during installation, and introduce a written schedule.
Naturally, all of the above affects the final cost of the project and increases it.
How much does it cost to install a ton of steel structures?
When working with metal structures, it is necessary to indicate the cost of work with their volume, which is measured by the weight of the mounted frame components. When planning the installation of metal structures, the cost of work per 1 ton is always calculated individually, taking into account the following works:
- transportation, loading/unloading of metal products;
- lifting them to a height with the help of special equipment;
- performance of welding and bolted connections.
As a result, the price may be slightly adjusted by the manager of the company, depending on the features. a certain object. For this reason, in every separate case, calculating the cost of installation of metal structures per ton, it usually becomes indicative.
The final price may be affected by the terrain on the site, which causes some difficulties during welding. Moreover, always take into account individual requirements client: installations of one ton of metal structures, which were made according to original sketches, taking into account the features of the further operation of the facility.
At the same time, coefficients can be applied to the established prices, which allow taking into account such points as:
- the complexity of the project itself;
- urgency of the order;
- remoteness of the construction site;
- weather conditions during construction.
The cost of installation of metal structures in the table
The cost of works on the installation of metal structures indicated in the table allows you to navigate the pricing policy, the range of work performed, technical capabilities enabling the project to be implemented. Although the amount for welding work is accurate, it is always determined on the basis of project documentation, based on all the features of the building (area, number of floors, a complex of additional factors).The cost of installation of metal structures, depending on the name of the product
Table 2. Price list for the installation of metal structures, depending on the product name
Cost in rubles per ton
Today, in specialized companies, you can easily order the installation of metal structures of any complexity. As you can see, experts offer low prices and quality assurance. The exact amount will be calculated only on the basis of project data, which usually takes no more than one working day.
Along with the production process, the installation of metal structures becomes a defining stage for the formation of high indicators of strength, reliability and durability of the entire structure.
The price for the installation of metal structures can vary greatly depending on many factors:
- The type of structure and the degree of its complexity (installation of a garage in any case will cost less in comparison with a production or shopping complex).
- Building area. When installing metal structures, the cost of work per square meter will decrease with an increase in the total area of \u200b\u200bthe building.
- pricing policy construction company.
- Weights of metal structures. The cost of a prefabricated building largely depends on total weight mounted frame.
- The location of the object. Performing the installation of metal structures in Moscow, the administrative location of the construction site, the amount of transportation costs for delivery are always taken into account necessary equipment, transportation of workers.
- Opportunities for mechanization of the assembly process, the use of special equipment. A hindrance can be, for example, an operating building located in the immediate vicinity, features of the terrain.
- Availability of necessary infrastructure. The cost of installation of metal structures is greatly influenced by the availability of communications necessary for operation: roads for the passage of equipment, regardless of weather conditions, the ability to connect to the power grid.
- Order fulfillment deadlines. Short deadlines require the involvement of additional teams of workers, an increase in the volume of special equipment used during the installation, and the introduction of a shift schedule.
All this is reflected in the final cost of the project in the direction of its increase.
Installation of metal structures: price per 1 ton
When working with metal structures, it is customary to link the cost of performing work with their volume, measured by the weight of the mounted frame elements. When planning the installation of metal structures, the price of work per ton is calculated by specialists, taking into account the work:
- for transportation, loading / unloading of products;
- their rise to required height with the help of special equipment;
- making bolted and welded joints.
Subsequently, it can be somewhat adjusted by the managers of the construction company, depending on the characteristics of a particular object. Therefore, in each individual case, when determining the cost of installation of metal structures, the price per 1 ton in Moscow, as a rule, becomes indicative.
The final cost can be affected, for example, by the terrain on construction site, which will cause additional difficulties when performing assembly work. In addition, the individual requirements of the customer are always taken into account: the installation of 1 ton of metal structures made according to unique sketches, taking into account the features of the subsequent operation of the building.
Also, coefficients can be applied to the established prices, allowing to take into account such parameters as:
- the complexity of the project;
- urgency of the order;
- remoteness of the construction site;
- weather conditions during the construction period.
Table 1. The cost of installation of metal structures
Prices for the installation of metal structures in Moscow
Indicated in the price list, the cost of works on the installation of metal structures allows you to navigate the pricing policy of the construction company, the range of work performed by its specialists, and the technical capabilities for the implementation of the project. Although the exact amount that will be required to complete the assembly work is always determined on the basis of project documentation, taking into account all the features of the building (number of floors, area, a set of additional factors).
Table 2. Price list for the installation of metal structures, depending on the product name
Table 3. Price list for the installation of metal structures, depending on the parameters of the building
Call us and order the installation of metal structures of any complexity in our company. We can offer best prices and also provide quality assurance. The exact amount of the project implementation will be calculated by the manager based on the project data on the day of the request.
Estimate for the manufacture of metal structures - This Full description and calculation of the cost of all structures. Based on the estimate, each customer makes a payment. If you apply to PROEKTSTROY-P LLC, on the basis of your order, an estimate and a service agreement are drawn up.
What is included in the estimate for the manufacture of metal structures
- The estimate has four columns. The first column indicates the name of the ordered metal structures, the second - the quantity expressed in meters, pieces, the third column contains all information on the cost of a square or running meter metal structures, the fourth - the full cost of the goods.
- At the end of the estimate is the column "Total". It contains all the calculations made, on the basis of which payment will be made.
- When placing an order for the manufacture of metal structures, you will immediately fill out an estimate. Each client is immediately aware of how much they will have to pay for the full cycle of work performed.
- For the manufacture of metal structures, you can see an example of an estimate on our official website.
- If, in addition to the manufacture of metal structures, you order installation, the estimate will indicate the full cost installation work and delivery made in one or more flights.
- Remember, the estimate is an important document. It can only be compiled by a specialist in the field of calculations.
- After filling out the estimate, everything should be carefully checked and recalculated.
We manufacture steel structures in our own factory
If you plan to order the manufacture and installation of metal structures, please note that it is very important to find a company that offers the manufacture of products in conditions own production. You do not have to overpay for the services of intermediaries. As a result, the cost of the finished product and installation will be acceptable.
The LLC PROEKTSTROY-P company has its own plant with new imported equipment. We are ready to produce metal structures in any volume and a high degree of complexity.
Installation is carried out by highly professional specialists with extensive experience. During installation, all technical standards and rules. Therefore, our metal structures are considered to be of the highest quality. The service life is several decades. Agree, this is a kind of quality guarantee, which, by the way, we confirm in writing to each client.
When building objects various types and dimensions, the basis for the implementation of the project is the estimated cost. Metal structures are widely used in construction. Their installation is a separate extensive stage, requiring careful calculations of the estimated costs of manufacture and installation.
Steel structures are used in construction industrial buildings(offices, hangars, warehouses, etc.) and residential facilities. At the same time, the cost of their installation and manufacture can vary greatly. The main purpose of budgeting is to identify and further exploit opportunities to reduce costs and increase economic efficiency the entire project.
Components of the estimate documentation
Calculations of costs for the manufacture and installation of metal structures are included in the design documentation of the facility. This is the important part that without fail reflects:
- list of estimated costs;
- general calculation of costs for the installation of metal structures;
- costs for other planned types of work and materials;
- unforeseen expenses and possible risks.
The estimate documentation is very extensive and includes a certain number of constituent elements. These include the following.
- Local estimates.
- Installation work schedule.
- Overhead calculations.
- Explanatory note.
The local estimate is primary document. It is compiled for specific types of work and reflects unit prices. These include, for example, the cost of installing 1,000 kg of metal structures. It also provides a general calculation of the final price.
The statement of calculation of installation work is compiled on the basis of completed structural elements. Overhead calculations include the calculation of exactly those costs that are required to create suitable conditions for mounting.
Explanatory note to budget documentation is a reflection of all the characteristics of the object, which are designed to give an idea about it and about all the standards that apply to the object.
The procedure for carrying out estimates
The cost of erecting steel structures can vary greatly, depending on various variables (size of the object, its type, construction features). The procedure for calculating the final price for installation is strictly defined. It implies that relatively small costs are initially indicated, and then, in increasing order, more serious ones.
Not so significant costs include types of work, for example, installation of 1 ton. In a more serious one, it is worth including the costs of manufacturing metal structures for the entire facility under construction.
The list of estimated costs must include columns that reflect the necessary budget to cover any unforeseen costs. This allows you to have some reserve for dealing with emergency situations, changes in the cost of materials or other factors that affect the amount of total costs.
Thus, a document is drawn up that reflects all the necessary information about the installation of metal structures:
- list of works;
- their volume;
- the required costs for the creation of appropriate conditions;
- specifications and norms erected structural elements;
- possible risks.
The total cost depends on the type of facility under construction, its dimensions and technical parameters. This value can be adjusted during the procurement of the required materials.
What determines the cost of installation
Together with the manufacture of metal structures, their construction is milestone, which has a direct impact on the durability, stability, strength and reliability of the entire future object.
The final cost of installation depends on many factors. Among them are the following:
- The type of the object being built. Different kinds structures have their own specifics and complexity of construction. This also affects the cost of construction. metal frame. Thus, the construction of a garage box will be much cheaper than a warehouse.
- The total area of the building. The cost of one square meter will decrease in proportion to the increase in the total area of the future object.
- Contractor pricing policy.
- Weight of structural elements. This factor largely affects the final price of the construction of a prefabricated structure.
- Location building object. The further it is from the administrative center, the more expensive the final construction price will be, since it will include the cost of supplying materials, transporting equipment and workers to a remote construction area.
- Availability of opportunities for mechanized assembly through the use of special equipment. This may be influenced by nearby buildings and structures, as well as the features of the landscape and topography of the construction site.
- Infrastructure. If there are all the necessary communications near the construction site (electricity, roads allowing the passage of special equipment, etc.), then the process of installation and preparation for it will be greatly simplified, which means that its cost will be an order of magnitude lower.
- Urgency. If it is necessary to perform work in a shorter time, there is a need to increase the involved work force, special equipment, the use of shift work schedule. All this has a significant impact on the estimated cost in the direction of its increase.
The final price is calculated by specialists indicating the types of work, their volume and the weight of the structural elements being erected. Also, in the prices for the construction of the frame, the following are taken into account:
- delivery of materials and equipment;
- loading and unloading operations;
- the need to rise to a certain height individual elements through the use of special equipment;
- execution of bolted and welding type connections.
In the future, the cost of building a frame can be changed depending on various individual conditions. Therefore, the price of erecting 1 ton, which becomes the basis for calculations, is usually a guideline and can be adjusted both upwards and downwards. In this matter, such factors as manufacturing according to individual sketches and features of the operation of the future building often play a significant role.
Along with this, additional coefficients can be applied to fixed prices, which allow taking into account the degree of complexity of the project, its urgency, seasonality and climatic conditions, as well as remoteness from the construction site.
Estimate for the manufacture of metal structures
AT general list the cost of erecting structural elements, a significant part of the budget falls on the production of the required materials. Therefore, this article, as a rule, is drawn up in the form of a separate estimate.
Calculations of this nature reflect the cost of manufacturing metal structures, as well as the costs associated with this process. The cost plan for the production of structural elements is compiled according to the rules for the implementation of calculations that are uniform for all.
They imply that only those costs that are directly or indirectly related to its production can be included in the cost price. That is, the costs associated with servicing the household needs of the enterprise, overhaul and others cannot be reflected in the estimate for the manufacture of metal structures. The costs associated with a departure from technological process or a manufacturing defect.
An example of drawing up an estimate for the installation of metal structures
Download an example of drawing up an estimate for the installation of metal structures -
Dear friends!
Today we will talk about the features of compilation. Consider the prices that are necessary to calculate the installation price.
estimate on a metal structure includes, as a rule, two sections:
● Manufacturing of metal structures;
● Installation of metal structures
Often, in estimate for metal structures there are structures made in the "factory conditions". In the factory, the manufacturing process is an order of magnitude more intensive, since qualified personnel repeat similar operations daily, labor is mechanized and automated.
However, the contractor often performs work on the manufacture of metal structures in construction conditions (in the conditions of production bases). Those. manufactures metal structures independently.
Manufacturing of metal structures
Calculation estimates for the manufacture of metal structures produced in the event that the metal structures will be manufactured in construction conditions (in the conditions of production bases).
For the manufacture of metal structures as part of the estimate and regulatory framework, there is a collection of norms and prices GESNm-2001-38 "Production of technological metal structures in the conditions of production bases."
The norms of the collection GESNm-2001-38 "Production of technological metal structures in the conditions of production bases" are intended solely for calculating the cost of work for the manufacture of technological metal structures, but not for their installation. With the consent of the customer and the contractor, according to the norms (prices) of the GESNm-2001-38 Collection, it is possible to form an estimate for the manufacture of conventional metal structures that are performed by the contractor itself. At the same time, overhead costs and estimated profit when using the rates of this collection are applied as follows: overhead costs - either at an individual rate, or in the amount of 66% of the wage fund, estimated profit - 65% of wages construction workers and machinists or according to an individual rate agreed with the customer.
If the cost of metal structures is taken into account according to the collection estimated prices for materials, products and structures, then the prices of the Collection of GESNm-2001-38 should not be applied.
Installation of metal structures
The cost of installation of metal structures is determined regardless of the conditions of manufacture.
When calculating estimates for the installation (or dismantling) of metal structures the collection GESN-2001-09 (FER-2001-09) "Building metal structures" is used.
This collection contains federal unit rates (hereinafter referred to as rates) intended to determine estimated cost for the performance of works on the installation of building steel and aluminum structures of industrial, civil buildings and structures for various purposes.
At dismantling of metal structures a reduction factor is used, according to Table 2 of the collection GESN-2001-09 (FER-2001-09) "Building metal structures".
In the appendix to the article, you can sample estimate for the manufacture and installation of metal structures.
Previously reported on budgeting when calculating the cost of metal structures. You will be able to create professionally estimates for the manufacture and installation of metal structures. You can learn as online mode(with remote contact with the teacher), and in person.
