Coffee table with LED lighting. Unique do-it-yourself infinity table Structurally, tables are

Ordinary dressing tables, as a rule, need to be installed in a well-lit area. Models with external and built-in lighting from the Heggi catalog remove this limitation. Now the furniture can be placed even in the corner, and at the same time uniform, comfortable lighting for cosmetic procedures will be quite enough.

Model range of dressing tables with mirror and lighting

The collection includes several modifications of furniture:

traditional dressing tables with lighting and a mirror (one or three canvases). Equipped with open closed shelves, drawers, poof. Materials: solid wood, veneered MDF, metal;
dressers with several drawers at the bottom. Convenient if you need extra storage space in the room. A mirror and a niche for cosmetic accessories are installed under a hinged lid;
designs that combine the functions of a dressing table and a desk. The mirror and cosmetic compartments are hidden under the mobile top. When folded, the furniture turns into a comfortable workplace.

Each model belongs to one of the furniture series for the bedroom and living room. Buy dressing table with lighting can be separately or complete with a wardrobe, chest of drawers, bed, bedside tables. Goods are delivered throughout Russia (check the timing and cost with managers). In Moscow, the possibility of self-delivery from the warehouse of the store is provided.

Reading time ≈ 6 minutes

You can make the interior unique and original with the help of unusual pieces of furniture, for example, a table with an infinity effect. Making such a little thing yourself is not difficult if you follow a simple instruction. The finished product will organically complement any modern interior and will cause genuine delight among households and guests!

Table with LED lighting.

Table feature

Externally, the table is not much different from any ordinary coffee table. However, as soon as the backlight is turned on, the tabletop of the product begins to flicker and glow with hundreds of lights, creating the illusion of infinity. You want to admire such magic all the time, but those who are indifferent to unusual table not found among adults or among children.

Coffee table with backlight looks especially impressive when the lights are off in the evening.

The effect of infinity is achieved due to the special design of the tabletop - its box consists of two mirrors, and a diode tape is installed on the sides. At the same time, for top cover a translucent mirror is selected so that the light pattern is more visible and pronounced.

A more detailed design of the product is shown in the photo below:

Design.

You can turn on the product using remote control or a special switch on the box.

To illuminate the countertop, you can choose diodes of any desired shade or combine several colors. But experts especially recommend taking a closer look at the red diodes - due to the small dispersion, the endless tunnel acquires more depth.

Such an unusual piece of furniture is perfect for both home use and office placement. It can be made in absolutely any size and from any material.

Table with lilac backlight.

Materials and tools

You can make an exclusive piece of furniture with your own hands. To do this, prepare necessary materials, tools and follow the step-by-step instructions.

To make a table you will need:

boards for the frame (made of wood or chipboard);
mirror according to the parameters of the countertop;
translucent mirror. Dimensions should be 10 cm larger than the lower mirror;
self-adhesive diode tape, length depending on the size of the table, but not less than 1.5 m;
materials for connecting the tape: controller, programmer, wires, power supply with USB;
consumables: sandpaper, glue, screws, metal corners.

Instead of a translucent mirror for the top cover, you can take ordinary glass and self-paste it with a tint film.

Idea: to cut down on work, you can buy the simplest table in any furniture store and use it as a finished base.

Why choose LEDs:

They give a rich, beautiful, deep shade.
Longer service life without burnout (at the same time, the number of on / off does not affect the service life).
No heating.
High efficiency.
A variety of colors.
Acceptable cost.
Light bulb safety.

Assembly

Before assembly, it is necessary to develop a drawing of the table, calculate the distance between the mirrors, the number of diodes, and consider the location of the electrical elements.

To get an idea of how the flickering lights will look in the finished product, just place any light source between the bottom and top of the table and look at the result.

Regarding the distance between the mirrors, everything is individual and depends on your wishes. But often the average value is chosen - 8 cm. To calculate the depth of infinity, the distance between the covers must be multiplied by 16. Also keep in mind that the depth of the tunnel will depend on the light transmission of the top cover. After all the calculations, you can proceed directly to the assembly.

Step-by-step instructions for making a table with an infinity effect with your own hands - making a base:

From bars with a section of 5 * 5 cm and metal corners you need to make a frame for the future table. For fastening, use screws and a screwdriver.
With help sandpaper carefully process all edges and corners to give them smoothness, eliminate burrs.
Drill holes for electrical elements with a drill, follow the drawing. The holes need to be sanded tighter.
For additional fastening of the structure, you can process the joints with glue. After that, the frame must dry for at least 24 hours.

Frame assembly.

Tabletop assembly step by step:

To plywood sheet right size attach boards (section 5 * 1 cm) along the outer perimeter, and at a distance of 5-6 cm along the inner perimeter. You should get a kind of gutter between the boards - this is where the wiring and electrical elements(see photo above).
Place a mirror on the bottom of the countertop with the reflective side facing up.
To inside smaller frame, you need to attach the LED strip with double-sided tape.
Wiring is laid in the space between the frames.
Attach the top mirror cover to the tabletop.
The whole structure is fastened with screws.

Tabletop assembly.

At the end of all the work, you should get something like this table with a mirror surface:

Finished product with backlight off.

However, it should be understood that you can make a table with an infinity effect from any material that you know how to handle - for example, plexiglass, plastic, metal.

When working with mirrors and glass, remove the protective film only at the end of all processes.
Be sure to thoroughly study the diode connection diagram to avoid short circuit or, even worse, fires.
Use a moisture-resistant adhesive for fastening.
In the event of a breakdown of electronic parts, it will be convenient to have Free access, therefore, it is better to place the controller and programmer not inside the table, but outside - placing it in a neat box and fixing it under the table top.

There are many creative ideas used furniture makers when making masterpieces with your own hands. A bright, original and memorable product that will perfectly decorate a modern interior and create a unique atmosphere is Coffee table ir with infinity effect. It is not very easy to make it, but it is quite possible with some skills in working with wood and glass.

You can place a table with backlight as in office space either in the country or at home. The LED lamps used in the assembly of such furniture are absolutely safe for human health, as well as for environment. Such lamps are durable and economical, so the operation of a table with an infinity effect will not lead to increased power consumption.

The illusion of an endless tunnel is created through the use of two mirror surfaces and LEDs located between them. The colors of the lamps used can be any, however, experts say that red diodes allow the tunnel to be deeper, since the red color is less prone to scattering than other colors.

To control the backlight, an on-off button or a special remote control can be used.

Preparing to start work

To make a coffee table with a mirror, you need to prepare necessary tools and materials. The master will need:

boards - wood or chipboard;
sandpaper - it is needed to process the boards after cutting them (if the material is purchased cut into suitable elements, then there is no need to use sandpaper);
an ordinary mirror - for a coffee table with a diameter of about 60-70 cm;
translucent mirror - its width should be about 10 cm more than the width of a regular mirror (an additional size is needed so that the glass can be glued to the strips with LEDs); in the absence of a translucent mirror, you can use glass on which a mirror film is glued;
power supply with USB output;
self-adhesive LED strip with a length of at least 1.5–2 m;
wires;
USB to power the microcontroller;
microcontroller and programmer for it;
self-tapping screws;
Super glue;
screwdriver

Some masters prefer to make a table with their own hands using a New Year's garland instead led strip. In this case, there is no need to purchase equipment that equips designs with LED strips (microcontroller, USB).

Table top assembly procedure

First, a frame (sidewalls) is assembled from 4 boards using self-tapping screws future design, then this frame is glued on top of the mirror, on its front side. In this case, the size of the frame must correspond to the dimensions of the mirror.

At the next stage, a frame with LEDs is assembled with your own hands. The outer diameter of the frame can be equal to the outer diameter of the frame or be greater than it, but the inner diameter must be less than the inner diameter of the frame by 1-2 cm on each side. When the frame is ready, with her bottom side, an LED strip is attached along the inner edge. Then the frame is attached to the sidewalls with screws. Holes are drilled in the frame through which the wires are brought out.

When all these works are completed, it remains to attach a translucent mirror to the frame. It is fastened with special screws. It is advisable to choose screws that can be removed without much difficulty (in case the LEDs need to be replaced). Masters recommend attaching small strips to the edges of the frame, which in height form a single plane with glass. At the final stage of work, it will be possible to attach to these strips upper frame providing secure fixation countertops.

Not every craftsman can equip a table with such a mirror, because this material is quite rare. Many furniture makers use plexiglass and self-adhesive mirror film, which is applied to the bottom surface of the glass (the one that will be turned towards the mirror).

Mirror-coated glass is also popular, but it must be chosen correctly. To determine if mirror-coated glass is suitable for making an infinity effect coffee table, you can put a piece of mirror and a piece of glass in parallel, and place any light source between them and visually evaluate the effect.

Another affordable option, which is often preferred by novice masters, is the use of the usual window glass. But in this case, it will not be possible to achieve a sufficient depth of the infinite tunnel. In addition, the observer will be able to see everything that is inside the table.

One of the most important characteristics One thing to pay attention to when assembling a mirror table is the depth of the tunnel. It is determined by two factors:

the distance between the mirrors (actual distance should be multiplied by 16 to get the approximate apparent depth of the tunnel; in most cases, the actual distance from the lower mirror to the upper one is 75-80 mm);
throughput translucent material.

To ensure long-term operation of the backlight and save energy, it is recommended to use a power supply with a 50% power reserve.

There is an easier way to make a do-it-yourself table with an infinity effect. In this case, instead of the LED strip, the usual one is used. christmas garland. First, a square or rectangular frame is made from the bars, then the number of light bulbs on the garland is counted.

After that, marks are applied to the frame in those places where the light bulbs will be located. It is recommended to place them at a distance of about 2 cm from each other. At the next stage of work, holes for light bulbs are drilled in the frame of the future table.

Then light bulbs are inserted into these holes and fixed there. Then you need to stick the frame on the mirror with your own hands, and stick the glass on top of the frame with mirror film.

When the backlit tabletop is ready, it remains to make the base and legs of the table. The legs should be thick enough (about 10 cm in diameter) so that a hole for wires can be drilled inside one of them. Leading wires through the leg is a solution that allows you to make the product as aesthetic as possible. It is possible to run the wires directly from the table top, but this will make the table less beautiful and easier to use.

When the legs are made, in one of them you need to form through hole with a diameter of about 5 cm. In the upper part of the leg, two grooves should be made through which the wires will pass, and also cut out the corner hole necessary to fix the table top.

The height of the hole should be equal to the height of the countertop. The depth of the hole must be calculated individually in each case, it must ensure reliable fixation of the table top. Similar corner holes are made on all four legs.

In addition to the legs, you need to prepare a base in which the countertop will be placed. The width of the base should be such that the base protrudes 8-10 cm on each side of the countertop placed inside it. Free space around the countertop is needed to accommodate wires and related equipment.

A hole is formed in each corner of the tabletop into which the leg is inserted. Then, with the help of self-tapping screws, an external frame is attached to the base, the height of which is equal to the height of the countertop. Then the legs are screwed, and the countertop is placed in the finished structure. In the spaces between the table top and the outer frame, wires are placed, which are led out through the table leg.

When the assembly of the base and tabletop is completed, it remains only to close the space with wires and additionally fix the tabletop inside the base. For this, a special frame is made.

The width of each side of the frame is calculated as follows: the width of the gutter with wires + the thickness of the outer frame + a few centimeters to ensure that the tabletop is fixed by the frame. This frame is assembled from four blanks and fastened with self-tapping screws. Then it is bolted to the outer frame, as well as to the frame of the tabletop with LEDs.

Bolt holes must be pre-drilled to avoid delamination of the wood. The design is ready!

The desire to make an excellent interior and saturate your life bright colors inherent not only to young entrepreneurs, but also ordinary people who want to make their life happier. But with your own hands you can even make such an interesting piece of furniture as a table shimmering with lights.

Kinds

Illuminated tables can be customized different kind and appointments.

Dressing tables with lighting around the mirror. Light bulbs are located around the mirror frame. Lamps should only be white color. Colored lamps are not allowed.
With backlight, but without a mirror. Lighting is a design element and does not carry any technical role. As a rule, it is presented in the form of an LED strip. AT different options tape can be located in different places. Gives a contrasting, perhaps even "futuristic" tone, suitable for many interiors.

Structurally, tables are:

A table with no internal storage space. Not highly recommended, but if not necessary, you can consider this option. There are, of course, tables in the form of a triangle, a circle and other shapes.
Table with cabinet. This modification allows you to store cosmetics, and a lot of various tools for care. The number of pedestals does not vary much: one or two. It has a suspended compartment and a stand with drawers. The retractable drawer is definitely handy when working with make-up or hair. According to people's experience, it is considered very convenient for storing cosmetics, body care products and other similar products.

Table with drawers. Almost the most popular model table. Looks good, takes up little space. Subspecies: hanging, attached and corner tables. Do not forget that there are very original solutions which are not available in all stores.

How to choose?

Price, like quality, is one of the key issues, so before making a purchase, you need to carefully familiarize yourself with the market and study brands. Purchases can only be made in verified places. It is necessary to avoid dubious market points, dubious resources on the Internet. Special attention must be paid for compliance with GOST. Many dishonest manufacturers or craftsmen may use recycled or even hazardous material. Sometimes it is better to pay a third more, but at the same time win several times over in quality. The saying “the miser pays twice” does not lose its relevance here.

The material from which the table is made must also match the situation.

Be careful with too heavy, but at the same time small furniture if there are children or animals at home.

Where to buy?

Despite the external originality of such a furniture product, it is quite simple to acquire such a miracle.

The easiest, and probably the most obvious option is a furniture store.

Often such neon tables are part of a set and create overall design for the room, but you can also find specimens living on their own. It is important that such a table is not only convenient to use and fits the dimensions, but also becomes an integral part of the interior.

The second option is a specialized cosmetic store.

The advantage of this choice is that the options for tables offered in them are very practical. This is not just an interior decoration. This is an item that is designed for long-term use. As a rule, it has LED backlight.

The third option is, in principle, obvious, like the two previous ways. Like all products in the world, the table has not escaped the "showcases" of online stores.

Before you buy a table, be sure to read reviews on the forums or ask friends who have experience with such tables. It is noteworthy that such tables are still not such sold-out types of furniture, so it is better to look in advance on the search engine for the sites of stores nearby to you.

As a rule, serious stores have their own managers or sales assistants who have the duty to advise potential buyers by phone. Perhaps this approach will save a lot of time and reduce shopping trips to a couple of times.

How to do it yourself?

In fact, such a table can be made by yourself, at home. This does not require deep technical knowledge or special ingenuity. To do this, you will need sheets of wood or plywood, an LED strip, a special microcircuit, wires, a round mirror.

In addition to this, you will need glue (perhaps several types), paint and screws.

Work begins with the most basic. Cut out two circles desired diameter(usually 45-100 cm). The mirror is selected with the appropriate diameter.

Of course, that the table top can have not only the shape of a circle, respectively, the shape of the cut-out table top and mirror can be chosen at your discretion.

We put a mirror between the two rims and carefully circle the mirror with LED strip. Next, a hole is made to pass the wire through. We fix the microcircuit on the bottom of the tabletop and fasten the legs.

After the brainchild is ready, you can varnish or special paint to cover the legs and edges.

If you still have difficulties with manufacturing, you can contact a familiar carpenter. For a carpenter, this will not be difficult, since this is a daily task for him, and in half an hour he will do what would take several hours or even days. Such a person, most likely, is well versed in coloring and adhesive materials. Most likely, he has experience in other industrial or construction areas, has a “full hand”.

You will have to look for the diode tape, plywood, electrical stuffing and other elements of the product yourself.

Again, there's nothing wrong with that. Plywood and wood sheet can be found in hardware store, glue with coloring varnish can be found there. Diode tape is also sold at a hardware store. Small parts can be ordered online, possibly even at better rates.

Don't limit yourself to templates. It is worth thinking carefully about creating a table, perhaps there will be a desire to make an original stained glass window. The variety of stained glass tables is huge. For example, you can make a 3D table. This solution is also called the infinity effect. To do this, you need a few neon ribbons and a few mirrors. Due to the reflection of light, the surface acquires a three-dimensional image. There are many photos of colored tables on the Internet. You can see sites furniture stores or ready design solutions. Thoughtful interior professional designer, who posted his work on the network, can become the basis for the idea when creating his table.

When working with diode tape, you must be extremely careful. Hands must be dry, and rubber slippers must be worn on the feet.

In fact, it is possible that independent production would be the cheapest and fastest way. Another plus is that you can choose the interior yourself.

And if you like it, you can open a store of such tables yourself. This table would make a great gift.

There are many creative ideas used by furniture makers when making masterpieces with their own hands. A bright, original and memorable product that will perfectly decorate a modern interior and create a unique atmosphere is a coffee table with an infinity effect. It is not very easy to make it, but it is quite possible with some skills in working with wood and glass.

You can place a table with backlight both in the office space or in the country, and at home. LED lamps used in the assembly of such furniture are absolutely safe for human health, as well as for the environment. Such lamps are durable and economical, so the operation of a table with an infinity effect will not lead to increased power consumption.

To control the backlight, an on-off button or a special remote control can be used.

Preparing to start work

To make a coffee table with a mirror, you need to prepare the necessary tools and materials. The master will need:

boards - wood or chipboard;
sandpaper - it is needed to process the boards after cutting them (if the material is purchased cut into suitable elements, then there is no need to use sandpaper);
an ordinary mirror - for a coffee table with a diameter of about 60-70 cm;
translucent mirror - its width should be about 10 cm more than the width of a regular mirror (an additional size is needed so that the glass can be glued to the strips with LEDs); in the absence of a translucent mirror, you can use glass on which a mirror film is glued;
power supply with USB output;
self-adhesive LED strip with a length of at least 1.5–2 m;
wires;
USB to power the microcontroller;
microcontroller and programmer for it;
self-tapping screws;
Super glue;
screwdriver

Some masters prefer to make a table with their own hands using a New Year's garland instead of an LED strip. In this case, there is no need to purchase equipment that equips designs with LED strips (microcontroller, USB).

Table top assembly procedure

First, the frame (sidewalls) of the future structure is assembled from 4 boards using self-tapping screws, then this frame is glued on top of the mirror, on its front side. In this case, the size of the frame must correspond to the dimensions of the mirror.

At the next stage, a frame with LEDs is assembled with your own hands. The outer diameter of the frame can be equal to the outer diameter of the frame or be greater than it, but the inner diameter must be less than the inner diameter of the frame by 1-2 cm on each side. When the frame is ready, an LED strip is attached to its underside, along the inner edge. Then the frame is attached to the sidewalls with screws. Holes are drilled in the frame through which the wires are brought out.

When all these works are completed, it remains to attach a translucent mirror to the frame. It is fastened with special screws. It is advisable to choose screws that can be removed without much difficulty (in case the LEDs need to be replaced). Masters recommend attaching small strips to the edges of the frame, which in height form a single plane with glass. At the final stage of work, it will be possible to attach an upper frame to these slats, which ensures reliable fixation of the tabletop.

Another affordable option, which is often preferred by novice craftsmen, is the use of ordinary window glass. But in this case, it will not be possible to achieve a sufficient depth of the infinite tunnel. In addition, the observer will be able to see everything that is inside the table.

One of the most important characteristics that you need to pay attention to when assembling a mirror table is the depth of the tunnel. It is determined by two factors:

the distance between the mirrors (actual distance should be multiplied by 16 to get the approximate apparent depth of the tunnel; in most cases, the actual distance from the lower mirror to the upper one is 75-80 mm);
throughput of a translucent material.

To ensure long-term operation of the backlight and save energy, it is recommended to use a power supply with a 50% power reserve.

There is an easier way to make a do-it-yourself table with an infinity effect. In this case, instead of an LED strip, a regular New Year's garland is used. First, a square or rectangular frame is made from the bars, then the number of light bulbs on the garland is counted.

Then light bulbs are inserted into these holes and fixed there. Then you need to stick the frame on the mirror with your own hands, and stick glass with a mirror film on top of the frame.

When the legs are made, in one of them you need to form a through hole with a diameter of about 5 cm. In the upper part of the leg, two grooves should be made through which the wires will pass, and also cut out the corner hole necessary to fix the table top.

When the assembly of the base and tabletop is completed, it remains only to close the space with wires and additionally fix the tabletop inside the base. For this, a special frame is made.

Bolt holes must be pre-drilled to avoid delamination of the wood. The design is ready!