Floor-standing gas cast iron boiler baxi slim. Heating boilers Baxi. Video on the topic

Series Slim FM boilers from Baxi Corporation (website – baxi. ru) includes several cast iron floor boilers for gas fuel with different power– from 22 to 60.7 kW. They are completely non-volatile. Their design and energy efficiency fully comply with modern European standards. They have a light gray (traditional for Baxi products) body, a black control panel with an LCD display.

Main Feature of this equipment- thoughtful automatic system regulation of boiler operation. There is a thermocouple, which, in the event of combustion failure, closes the inlet valve gas fuel. As a result, the device does not require electricity. This optimal solution, if natural coolant circulation is selected.

In this model range manufacturer There are several energy-independent boilers. The most popular of them are those that can be used for heating private houses.

– basic information

This convection heating the boiler is capable of operating with a maximum power of 22 kW. It is sufficient to heat the premises, total area 200-250 m2. It is non-volatile. Can be integrated into a heating circuit. To organize hot water supply, you must additionally purchase a boiler indirect heating. Its efficiency is 88%. Designed for floor installation.

This model has mechanical control using a display located on the front panel. Operating parameters can be monitored using a thermometer and pressure gauge. Optional connection available remote control. It is possible to use it in systems with both gravity and forced coolant circulation circuits (with a circulation pump).

boiler baxi slim ef 1.22 – technical specifications

Essential workers characteristics of this equipment are as follows:

1. Burner gas atmospheric ignition, made of stainless steel;
2. The combustion chamber is open;
3. The heat exchanger is made of cast iron;
4. Maximum flow natural gas– 2.64 kW per hour, liquefied gas – 1.64 kg per hour;
5. The maximum achievable coolant temperature is 95 degrees C;
6. Pressure in heating circuit– 4 atm;
7. Overall dimensions – 40x85x59.5 cm.

The boiler safety system includes gas control, overheating and freezing protection, as well as a safety valve. There is an option to connect a room thermostat.

– basic information and characteristics

This model has a power of 30.5 kW and is intended for heating residential premises with a total area of ​​270-350 m2, and is energy independent. It can operate on natural main gas or (after reconfiguring the burner) on a propane-butane mixture.

Coefficient useful action– 87.6%, the boiler is capable of heating the coolant to a temperature of 95 degrees C. Like other Slim EF models, this product has a stainless steel pilot burner. The combustion chamber is open. The operation of the equipment is controlled using a panel with an LCD display located in the upper part of the case. Connection possible remote control.

If you decide buy boiler Slim EF, contact our store. Price You can check with our manager for a particular model. As agreed with the customer, delivery is made to the specified address.

Thanks to direct cooperation with the manufacturer, we are able to supply additional equipment and spare parts. High quality Products guaranteed!

The choice of equipment such as a gas boiler is always taken seriously.

The cost, as well as the important role that the device will perform, makes it necessary to carefully study all options.

When you are planning to purchase a Baxi gas boiler, most likely you are looking for information about the manufacturer, models and user reviews. We offer a complete review.

BAXI GROUP is a large holding company operating in Europe since 1866. What is not produced under the Baxi brand! From cast iron bathtubs and enamelware, to equipment powered by solar energy. In general, everything related to heating and microclimate in the house.

In terms of sales volume, Baksi ranks third and is represented on the Russian market (since 2002). large selection its products.

Types of Baxi boilers

• One-
• Dual-circuit.

If in the first version only the house is heated, then the double-circuit boiler also supplies the consumer with hot water. Both options have their adherents.

Connecting a pair of devices in one housing provides aesthetics, space saving, and maintenance of only one device. On the other hand, separate water supply and heating is considered more reliable and wears out equipment less.

• Wall models.
• Floor-standing.

Wall-mounted appliances, as a rule, have low power, are neatly mounted on the wall and can even be “hidden” in kitchen cabinet. More powerful boilers inevitably have large sizes. Therefore, their installation requires a reliable foundation and separate room. The choice here comes down to calculating the required power according to the size of the home.

• With open (atmospheric).
• And a closed (with turbine) combustion chamber.

An open combustion chamber is also called a chimney chamber, since for the normal removal of combustion products it requires draft created by a long flue (similar to a chimney pipe).

In a closed or turbine combustion chamber, the draft is created by a fan, so the chimney can no longer be routed through the roof, but rather made small coaxial pipe leading through the wall. This option is convenient for apartment residents, it minimizes installation costs, but makes the heating system tied to electricity (the solution is to install a UPS, but this option will be more expensive).

Floor standing boiler Baxi Slim

If there is an F at the end of the Baxi boiler model name, this means that it has an open combustion chamber. Example: Baxi ECO – 5 Compact 1.24F

• Convection.
• Condensation.

The principle of convection underlies the operation of any gas boiler: the flame heats the coolant, and part of the heat evaporates into the pipe.

In condensing models, a heat exchanger is added, on which hot gas condenses and additional heating coolant.

Their strengths and both options have disadvantages. The presence of an additional heat exchanger requires more complex maintenance; the device itself is more expensive and larger in volume. A convection boiler is simpler and costs less, but the efficiency is lower.

Assortment

For convenience, Baksi boilers are combined into lines under the general name, with common features. And within the line, devices may differ in power and other characteristics. Let's consider wall and floor options separately.

Wall-mounted gas boilers Baxi

• Main;
• Eco Four;
• Baxi Four Tech;
• Eco Compact;
• Luna;
• Baxi Nuvola.

Wall-mounted boiler Baxi

Key Features:

• Baxi Main(means “Basic, main”). Wall-mounted gas double-circuit boiler with a bithermic heat exchanger installed.
• Eco Four- These are double-circuit boilers with two separate heat exchangers. Hydraulic tubes made of copper.
• Four Tech– modification developed on the basis of Eco Four. Due to the fact that the supply tubes are made of plastic (rather than copper), the cost of the devices is reduced.
• Baxi Eco Compact– a model similar to Eco Four but more compact.
• Baxi Luna– for the most part, double-circuit (with the exception of model 3 1.310Fi) boilers. Self-diagnosis system, floor heating mode, all protective functions, LCD display.
• Baxi Nuvola– a boiler is built into the design large capacity. They can be with an atmospheric or turbine chamber. Copper heat exchanger.

Wall boilers

Single-circuit

Models with only one heating circuit:

• ECO-5 Compact 1.14F;
• ECO Four1.14, also with F;
• LUNA 3 Comfort1.240;
• ECO Four1.24;
• Luna-3 Comfort 1.310Fi.

Average price for such models 28 - 47 thousand rubles.

Single-circuit boilers

Popular model in its class: Baxi ECO Four1.14 (power 14 kW, chimney diameter 120 mm, overall dimensions 73 x 40 x 29.9 cm, with circulation pump, air vent, 8-liter expansion tank, weight 25.5 kg, self-diagnosis, LCD display, copper heat exchanger, average price 28 thousand rubles).

Double-circuit atmospheric

• ECOFour 24F;
• ECO-5 Compact 14F;
• ECO4S 18F;
• Main 5.14F and 5.24F.

Prices for atmospheric double-circuit units also range from 27 to 37 thousand rubles.

Popular model in the class: Baxi MAIN-5 14F Average price 27.5 - 28 thousand rubles.

Double-circuit turbocharged boilers

Boilers with a turbine combustion chamber and having two circuits can cost 77 - 103 thousand rubles.

These, for example, include models:

1. Luna Duo-Tec1.28;
2. Duo – Tec Compact Ht 1.24 Ga and others.

An example of a people's favorite at an affordable price: Baxi Luna3 Comfort 240Fi. Technical Parameters: Power 25 kW. Overall dimensions 76 x 45 x 34.5 cm. Weight 37 kg. Diameter for chimney 60/100 mm. Copper heat exchanger. About 14 liters of hot water are produced per minute. Price 35 – 40 thousand rubles.

The central element of a gas boiler is the burner. You can make such a device yourself. For manufacturing instructions, see the article.

You can read consumer reviews about Conord gas boilers.

Lemax gas boilers are quite popular. Affordable prices and a wide range of models are the main advantages of the devices. This topic details the characteristics of the devices, as well as an overview of the models.

Condensation

1. Luna Platinum+;
2. Luna Duo- TecMpi +;
3. Duo-Tec Compact;
4. Nuvola Duo – Tec +.

In condensation models were introduced latest developments and technology. Each of them can be in single- and double-circuit versions. The equipment adapts to the conditions (pressure drop in the line, adaptive combustion control, etc.). They can also be translated into liquefied gas. Heat exchangers made of stainless steel. Electronic control, LCD display. Power various models 12 – 32 kW.

Luna Duo - Tec Mp is the only type of boiler that has increased power (can only be in a single-circuit version), and the models are compact, which allows them to be placed on the wall. Devices can be from 33 to 110 kW. They can also be combined in a cascade of up to 16 boilers.

If you need a wall-mounted boiler increased power, pay attention to Baxi Luna Duo - Tec Mp (single-circuit condensing).

Gas floor-standing boilers Baxi

Choice floor models Baxi is not as big as wall-mounted ones. The most popular line is SLIM. The devices have a cast iron heat exchanger and can have a power from 22 to 107 kW. Case width 35 cm.

Condensation

1. Power Ht45-150 (stainless steel heat exchanger).
2. Power Ht230-650 (silumin heat exchanger).

Super-powerful boilers of the new generation (the numbers in the model name mean possible thermal power in kW). Provided cascade connection to provide heat to large objects. The width of the units is only 45 cm.

Atmospheric

• Slim 2.230 i;
• Slim 1.230 i and in;
• Slim 1.150 i;
• Slim 1.620 in.

In addition, the entire SlimHPS and Slim EF line is available with an atmospheric burner.

The body is horizontally located (with a height of 1 m, width 1.14 - 1.24 m). Weight 266 – 380 kg.

SlimHPS has a sectional cast iron heat exchanger. Power 78 – 107 kW. Distinctive feature this series - in gas automation with a thermocouple that prevents gas supply when the flame goes out. The thermocouple is a non-volatile element, so the boiler remains operational even when the electricity is turned off. natural circulation liquids. Power 22 – 60 kW.

How to choose a Baxi gas boiler?

The approximate power of boilers is taken at the rate of 1 kW per 10 m2 of housing area. However, such calculations are very approximate and do not take into account the degree of insulation and heat loss through the windows. In addition, they are not suitable for double-circuit boilers because it is necessary to include power consumption for heating water.

Double-circuit boilers need to be purchased if the house does not have hot water supply at all. In case of seasonal and emergency shutdowns, it is better to purchase a separate water heater (instantaneous or storage).

For hard water, it is recommended to choose the ECO series, where the heat exchanger will not be affected as strongly as in other models.

Possible malfunctions, reviews

Sensitive equipment may not tolerate well or completely break down due to power surges, which occur quite often in the network.

And the more expensive and complex the unit, the more vulnerable it is to poor-quality power supply. Buyers, taught by bitter experience, are strongly advised not to skimp on a UPS and be sure to install it before the first start-up.

It is imperative that the outlet is grounded. By the way, there are opinions that the Luna series has more reliable electronics than the others.

Helps deal with breakdowns service centers, of which there are many throughout the country.

So, Baksi equipment can be selected to suit any capabilities and tastes. The cost of the units themselves is relatively low (especially when compared with solid fuel or pellet boilers). However, delicate electronics and sensors often break down and bad experience use is reflected in many reviews, along with positive ones.

Baxi boilers are widely popular due to the availability offline mode performance and reliability. and the structure of the unit, read carefully.

Which gas heater it is better to choose for a tent, see. Useful tips by choice and price overview.

Video on the topic

Baxi SLIM- floor-standing, quite compact gas boilers with electronic flame modulation. The boilers have a cast iron heat exchanger and atmospheric burner. Model range quite wide and includes boilers with a power from 15 to 62 kW, which allows you to select a boiler for heating a room with an area of ​​up to 620 sq. m.

Double-circuit boilers are manufactured with closed camera combustion outputs of 24 kW and 30 kW, with an open power of only 24 kW. Single-circuit Baxi boilers are produced with a closed chamber with a power of 24 and 30 kW, with open camera combustion: from 15 to 62 kW.

Floor-standing gas boilers Baxi SLIM designed for heating residential and non-residential premises. Baxi boilers are available with open and closed combustion chambers. For the combustion process, air is supplied into the open chamber directly from the room itself in which it is located. Air is supplied to the closed chamber from the street through special chimney which is more a comfortable option. This is especially important for residential premises. In addition, boilers gas Baxi SLIM are offered by the manufacturer as single- and double-circuit. It should be borne in mind that single-circuit boilers are intended only for heating the room, while double-circuit boilers both heat and provide hot water. IN double-circuit boilers Built-in stainless steel boiler with a capacity of 50 or 60 liters for hot water. If necessary, to single-circuit boilers You can connect boilers with a capacity of 80 or 120 liters made of enameled and stainless steel.

Baxi SLIM floor-standing gas boilers are available in various modifications. Boiler markings may be as follows:

• numbers 1 or 2 in the model name indicate the number of circuits in the boiler (1 - single-circuit, 2 - double-circuit);
• iN - model with an open combustion chamber, without hydraulic accessories (pump, expansion tank, pressure gauge);
• i - model with an open combustion chamber, with hydraulic accessories;
• FiN - model with a closed combustion chamber, without hydraulic accessories;
• Fi - model with a closed combustion chamber, with hydraulic accessories.

Advantages of Baxi SLIM series boilers

Boilers Baxi SLIM have a number of advantages. They are equipped necessary means control ensuring them safe work. For example, a relay minimum pressure gas will put the boiler into standby mode if the gas pressure decreases, and when it resumes, it will resume its operation. All boilers are distinguished by their compact design and modern design. Thanks to the built-in electronic self-diagnosis system, up to ten various types possible malfunctions heating system operation.

Long-lasting operation of the boiler, as well as savings in gas consumption, is ensured by continuous flame modulation instead of stepwise switching. Manufacturers provide trouble-free operation boiler when there are differences in gas inlet pressure, as well as automatic protection from freezing (when water temperature drops to 5 degrees). The boilers have a built-in weather-compensating automatic system. By connecting an outdoor temperature sensor, it is possible to automatically change the heating in accordance with the outside air temperature. In double-circuit boilers Baxi SLIM an antibacterial protection system is provided. Thanks to its activation once a week, it is ensured environmental safety water supply for the consumer.

Floor standing gas boilers with cast iron heat exchanger. The range of Baxi Slim boilers is quite wide and will satisfy the desires of any consumer. For sale there are models for heating with an open and closed combustion chamber, models with a built-in boiler of 50 and 60 liters. Baxi Slim power range is from 15 to 62 kW. Electronic flame modulation and built-in self-diagnosis system provide increased ease of operation and maintenance. A modern design and minimal overall dimensions (width only 35 cm) will allow you to easily place the boiler in any interior.

Brief description by model:

1. Baxi Slim 2.300 Fi, 2.230 i, 2300 i are equipped with a built-in boiler;
2. Models with the letter F in the series have a combustion chamber closed type, i - open type, IN - do not have a circulation pump;
3. Baxi Slim 2300 Fi, 2230 i, 2300 i, 1230 Fi, 1300 Fi, 1150 i, 1230 i, 1300 i - equipped expansion tank 10 liters and circulation pump.

Gas system Baxi Slim:

1. Continuous electronic flame modulation, both in heating and DHW modes;
2. Smooth electronic ignition;
3. Stainless steel burner;
4. Boilers are adapted to Russian conditions;
5. Operate stably when the inlet pressure of natural gas decreases to 5 mbar;
6. Can be reconfigured to run on liquefied gas.

Hydraulic system Baxi Slim:

1. Cast iron primary heat exchanger;
2. High-speed circulation pump with automatic air vent (except iN models);
3. Separate pump for the boiler (in models with a built-in boiler);
4. Pressure gauge (except iN models);
5. Pump post-circulation;
6. Possibility of connecting external storage boiler for hot water.

Temperature control Baxi Slim:

1. Two temperature control ranges in the heating system: 30–85°C and 30–45°C (warm floors mode);
2. Remote control device with climate regulator (supplied separately);
3. Built-in weather-dependent automation (possibility of connecting an outdoor temperature sensor);
4. Regulation and automatic maintenance set temperature in the heating circuit;
5. Regulation and automatic maintenance of the set temperature in the boiler (for models with a built-in or separate boiler);
6. Possibility of connecting a programmable timer;
7. Electronic temperature display.

Control and safety devices Baxi devices Slim:

1. Electronic self-diagnosis system;
2. Ionization flame control;
3. Protective thermostat against water overheating in the primary heat exchanger;
4. Draft sensor to control the safe removal of combustion products (pneumatic relay - for models with a closed combustion chamber, thermostat - for models with an open chamber);
5. Pump blocking protection system (turns on automatically every 24 hours);
6. Safety valve in the heating circuit (3 atm.) (except iN models);
7. Safety valve in the DHW circuit at 8 atm. (models with built-in boiler);
8. Frost protection system in the heating circuit and boiler;

Operating instructions and booklets Baxi Slim:

Floor-standing gas boiler Baxi Slim

When you need to heat a house quickly and at minimal cost, a floor-standing baxi gas boiler is preferably chosen. Especially if there is a gas main nearby. The owner of the house will have to collect the necessary papers, install a step-down station, install a gas pipeline and buy a gas boiler.

The manufacturer Baxi produces various modifications of boiler equipment from wall-mounted to floor-standing cast iron boilers.

The most popular models for large cottages, today, cast iron is considered floor standing boilers baxi slim. They are distinguished by high thermal efficiency, low gas fuel consumption and fairly modest size and weight. If we take as an example a floor-standing gas boiler of average power (no more than 30 kW), then it can weigh no more than 130-140 kg. This fact will mean the following - you will no longer have to choose an additional room in the form of a separate extension to install a gas boiler. It is enough to select the basement of the house, install the boiler inside, connect gas, water and electricity, and we can assume that in a short time the heating boiler will be able to heat the house. Modern Baxi slim floor standing boiler must have a connection to electricity, from which both the power supply unit of the heating boiler works together with the automation, and circulation pumps, valued for their ability to accelerate the coolant to the required speed in the heating system if there is a gas shortage. Most of the floor-standing cast iron boilers BAXI manufactured in single-circuit form. This fact means that one heating circuit can heat the house and at the same time provide hot water using an indirect heating boiler of impressive capacity (up to 2000 liters), which will provide an abundance of hot water needed for household needs. To do this, the boiler manufacturer BAXI uses a control panel installed on the front cover of the boiler, which in turn switches the pumps to the boiler, heating or mixing unit. And there is last advantage– no more need to light the fire floor cast iron boiler manually (using a burning piece of newspaper), since it has own system electric ignition, thanks to which the floor-standing boiler can turn on and off completely automatically. If we sum up all the positive advantages of cast iron floor-standing boilers baxi, then it becomes obvious that they are considered the most relevant and practical for those houses that have electricity, gas and tap water.