Gas boiler baxi eco 5 compact 24f. Gas boilers. gas system

A year ago

I've been using it since September 2017 and nothing has ever broken. A huge plus is that it is low-temperature (heating from 30 ° C), and can be directly connected to a warm floor without installing additional mixing devices. Has a small size. It heats up generally well, up to the set temperature, and tries to maintain it in the off / on mode. It has a lot of technical settings.

2 years ago

2 years ago

Appearance, compactness

2 years ago

A double-circuit boiler works for heating and hot water, or for underfloor heating. Looks good, has a compact size, informative display.

3 years ago

Pretty easy to manage. Maintains the set temperature. Got it from the builder.

A year ago

The boiler works disgustingly on liquefied gas (while there are no problems on the main line). You can not use liquefied gas for cars, due to the large amount of butane, the boiler starts to ignite worse than usual. When working from cylinders, if it does not ignite, it immediately falls into error, and only manually exits it. It is not possible to connect an external control to remotely change settings or reset errors. Only as a temperature sensor. The boiler of this model has a "smart" fan for supplying air to the chamber, which can change speed, which often caused problems during ignition.

2 years ago

very low reliability

2 years ago

Error E01 does not come out of it. Which only service companies did not come, changed the control board, measured the gas pressure, calibrated and adjusted the valve, turned the plug in the socket (changed the phase) - the result is the same - it turns off several times a day due to this damned error. At night you wake up from the cold and go turn it on. Plus, it makes a lot of noise even with one open tap.

2 years ago

Low power. If you set the temperature of hot water to medium mode, 40-50 degrees, then the boiler constantly (how to call it more culturally) switches from heating to hot water and back. If you set the temperature to the maximum, then it is not able to heat the water to the maximum temperature with the tap fully open, and this is provided that only one water distribution point in the adjacent room (bathroom) is working, if you wash the dishes at the same time, then there will be no water heating power to miss completely (you will have to wash either with cold water or with a weak pressure). At the same time, with everything, if the boiler reaches the maximum mode, something starts to whistle in it, and the hum is unpleasant and clearly indicates some kind of malfunction. When switching the boiler from water heating to heating mode or vice versa, something very

3 years ago

Dust penetrated under the cover immediately (repair). The fan buzzed (dust in the bearing), the master said it was necessary to have three covers in the design so that it was, and not one plus a decorative one. It won't stop the dust. He spoke badly about the water pump.

The gas wall-mounted boiler Baxi ECO-5 Compact 24 F is designed for heating private houses, cottages, country houses, summer cottages up to 230 sq. m. and also for the organization of hot water supply.

This boiler has separate heat exchangers, which is a great advantage where the water is rich in calcium and magnesium salts, in other words, the water is hard. By default, the boiler runs on natural main gas, but if necessary, the boiler can be converted to work on liquefied gas, for this you need to purchase a set of jets.

For the control board of a wall-mounted gas boiler to work, it must be connected to a 220 V electrical network. To maintain the warranty, manufacturers recommend installing a voltage stabilizer. How to choose a stabilizer, you can consult our specialist.

A closed combustion chamber (in other words, such boilers are called turbocharged) implies the presence of a fan in this boiler, which forcibly takes in air and removes combustion products to the street or a collective chimney. For such boilers, coaxial chimneys are usually used - "pipe in pipe"

The Baxi Eco5 Compact 24F boiler with a power of 24 kW is made using innovative technologies. The wall heating system runs on natural and liquefied gas. The energy-efficient boiler provides fast heating of all rooms of the facility, up to 230 kVm, using a simple programming system.
For comfortable use, the Baxi Eco5 Compact 24F boiler is equipped with a large, easy-to-read display and a knob that allows you to quickly program the equipment.
The perfect combination of comfort and practicality
The Baxi Eco5 Compact 24F boiler is a functional, reliable, high-performance, comfortable equipment with a digital display. It displays operating parameters as well as faults with symbols and codes. Thanks to this, the user can easily control the operation of the boiler and adjust the parameters to ensure the required temperature and water heating (DHW) in the premises.

Specifications

• Useful thermal power: 24 kW.
• Productivity maximum: 90.5%.
• Closed combustion chamber, natural draft.
• Tank capacity / pressure - 8 liters / 0.5 bar.
• Range of regulation of the temperature of the consumed water (DHW) - from 35°С to 60°С.
• The minimum expense of the used water - 2 l/min.
• Hot water flow rate 3.7 (l/min)/9.8 (l/min) at 25°C/35°C.
• Pressure in the DHW circuit - maximum / minimum: 8 / 0.17 bar.
• Electrical power/voltage - 110/230 W/V.
• The pressure of natural gas at the inlet is 13-20 millibars.
• Removable water filter and flue gas separator.

Hydraulic system

• Three-way valve.
• Steel burner.
• Corrosion resistant copper alloy heat exchanger.
• Automatic bypass.
• High efficiency circulation pump.
• Locking security systems.
• Hydraulic relief valve 3 bar.

Security

• Protective thermostat against overheating of the primary heat exchanger.
• Hydraulic pressure switch, in case of lack of water.
• Safety pressure switch to ensure the safe discharge of flue gases.
• Heating circuit sensor.
• Digital Thermometer.

Options for organizing smoke removal:

1. Horizontal coaxial chimney
2. Separate smoke exhaust system
3. Vertical coaxial chimney

Description from the manufacturer

gas system

• Continuous electronic flame modulation in heating and hot water modes;
• The boilers are adapted to Russian conditions. They work stably when the input pressure of natural gas drops to 4 mbar in the supply voltage range of 170-270 V;
• Increased adaptability of the boiler to smoke removal conditions that differ from the standard ones;
• Smooth electronic ignition;
• The flame spreaders on the burner are made of stainless steel;
• Reconfiguration for work on liquefied gas is possible.

Hydraulic system

• Hydraulic group made of composite materials;
• Turbine hot water flow sensor (flow meter);
• Energy-saving circulation pump with built-in automatic air vent;
• Primary copper heat exchanger coated with a special composition for additional protection against corrosion;
• Secondary stainless steel plate heat exchanger (two-circuit models);
• Three-way valve with electric actuator (two-circuit models);
• pressure gauge;
• Automatic bypass;
• Post-circulation pump;
• Cold water inlet filter;
• Possibility of connection to solar collectors.

Temperature control

• Two ranges of temperature control in the heating system: 30-85°C and 30-45°C ("warm floors" mode);
• Built-in weather-dependent automation (the ability to connect an outdoor temperature sensor);
• Regulation and automatic maintenance of the set temperature in the heating and hot water circuits;
• Digital indication of temperature;
• Possibility to connect a room thermostat and a programmable timer.

Control and safety devices

• Liquid crystal display with push-button control;
• Electronic self-diagnosis system;
• Possibility of outputting a signal about the blocking of the boiler to the dispatcher's console;
• Ionization flame control;
• Pump blocking protection system (turns on automatically every 24 hours);
• Three-way valve blocking protection system (turns on automatically every 24 hours);
• Protective thermostat against water overheating in the primary heat exchanger;
• Updated traction control system for ionization current and flue gas temperature;
• Pressure switch in the heating system - works when there is a lack of coolant pressure;
• Safety valve in the heating circuit (3 atm.);
• Frost protection system for heating and hot water circuits.

Modern household gas boiler BAXI (BAXI)ECO5COMPACT 24 always characterized by high performance and operates with minimal noise. The presented equipment was designed for use in modern premises in residential areas, it is comfortable to use, does not require frequent maintenance and is characterized by economical fuel consumption.

Features and benefits of wall-mounted gas boilers BBaxi series ECO-5 Compact

- Gas system

• Continuous electronic flame modulation in heating and hot water modes;
• The boilers are adapted to Russian conditions. They work stably when the input pressure of natural gas drops to 4 mbar in the supply voltage range of 170-270 V;
• Increased adaptability of the boiler to smoke removal conditions that differ from the standard ones;
• Smooth electronic ignition;
• The flame spreaders on the burner are made of stainless steel;
• Reconfiguration for work on liquefied gas is possible.

- Hydraulic system

• Hydraulic group made of composite materials;
• Turbine hot water flow sensor (flow meter);
• Energy-saving circulation pump with built-in automatic air vent;
• Primary copper heat exchanger coated with a special composition for additional protection against corrosion;
• Secondary stainless steel plate heat exchanger (two-circuit models);
• Three-way valve with electric actuator (two-circuit models);
• pressure gauge;
• Automatic bypass;
• Post-circulation pump;
• Cold water inlet filter;
• Possibility of connection to solar collectors.

- Temperature control

• Two ranges of temperature control in the heating system: 30-85°C and 30-45°C ("warm floors" mode);
• Built-in weather-dependent automation (the ability to connect an outdoor temperature sensor);
• Regulation and automatic maintenance of the set temperature in the heating and hot water circuits;
• Digital indication of temperature;
• Possibility to connect a room thermostat and a programmable timer.

- Control and safety devices

• Liquid crystal display with push-button control;
• Electronic self-diagnosis system;
• Possibility of outputting a signal about the blocking of the boiler to the dispatcher's console;
• Ionization flame control;
• Pump blocking protection system (turns on automatically every 24 hours);
• Three-way valve blocking protection system (turns on automatically every 24 hours);
• Protective thermostat against water overheating in the primary heat exchanger;
• Updated traction control system for ionization current and flue gas temperature;
• Pressure switch in the heating system - works when there is a lack of coolant pressure;
• Safety valve in the heating circuit (3 atm.);
• Frost protection system for heating and hot water circuits.

Baxi wall-mounted gas boilers of the ECO-5 Compact series are reliable and economical advanced devices with modern high-tech equipment, presented in distinctively compact slim cases. The equipment of this series is used in modern domestic premises and serves to establish hot water and heating systems.

Specifications

Comfort

Security

Connection

Before buying ask about technical specifications and a complete set by the seller

The wall-mounted gas boiler of the fifth generation ECO Compact is an economy class model with two separate heat exchangers for heating and hot water
and developed using the same platform as the MAIN 5 boiler.
This platform includes: even more compact body dimensions with a new original boiler interior layout;
the use of a power adaptation system and traction control by means of flue gas ionization and temperature control, and a new electronic board.

GAS SYSTEM
Continuous electronic flame modulation in heating and hot water modes;
The boilers are adapted to Russian conditions. They work stably when the input pressure of natural gas drops to 4 mbar in the supply voltage range of 170–270 V;
Increased adaptability of the boiler to conditions that differ from the standard ones;
Smooth electronic ignition;
Flame spreaders on the burner are made of stainless steel;
Reconfiguration for work on liquefied gas is possible.

TEMPERATURE CONTROL
Two ranges of temperature control in the heating system: 30-85°C and 30-45°C ("warm floors" mode);
Built-in weather-dependent automation (the ability to connect an outdoor temperature sensor);
Regulation and automatic maintenance of the set temperature in the heating and hot water circuits;
Digital indication of temperature;
Possibility to connect a room thermostat and a programmable timer.

HYDRAULIC SYSTEM
Hydraulic group made of composite materials;

CONTROL AND SAFETY DEVICES
Liquid crystal display with push-button control;
Electronic self-diagnosis system;
Possibility to signal blocking
Turbine sensor of the hot water flow of the boiler to the dispatcher's console; (flow meter);
Ionization flame control;
Pump blocking protection system (turns on automatically every 24 hours);
Three-way valve blocking protection system (turns on automatically every 24 hours);
Protective thermostat against water overheating in the primary heat exchanger;
Updated traction control system for ionization current and flue gas temperature;
Pressure switch in the heating system - works when there is a lack of water pressure;
Safety valve in the heating circuit (3 atm.);
Frost protection system for heating and hot water circuits.
Energy-saving circulation pump with built-in automatic air vent;
Primary copper heat exchanger coated with a special composition for additional protection against corrosion;
Secondary stainless steel plate heat exchanger (two-circuit models);
Three-way valve with electric actuator (two-circuit models);
pressure gauge;
Automatic bypass;
Post-circulation pump;
Cold water inlet filter;
Possibility of connection to solar collectors.