Decorative palm tree made from bottles. DIY palm tree made from plastic bottles step by step with photos and videos. Step-by-step execution of work

If you want to create an exotic tropical island on own dacha , as a decoration you will need a palm tree from plastic bottles. Making this prop with your own hands is not so difficult - you should collect two-liter bottles as much as possible, find reinforcement for the base of the palm tree and strong wire for fastening. And also allocate a little of your time, show imagination and creativity. If you like making things, read one of our previous articles. And right now we will deal with the queen of the tropical islands and the mistress of green oases - Her Majesty the palm tree.

In addition to the aesthetic, such a palm tree also performs a practical function - it helps recycle unnecessary bottles, which lie unnecessarily in the garage at the dacha or are lying around in the neighbors’ barn. Install a palm tree from plastic bottles near a country mini-pond or next to living plants, and you will get a nice photo zone with a real jungle. Well, let's start getting creative!

Palm tree made from plastic bottles: step-by-step instructions for beginners

There are several ways to create durable plastic palm tree from unnecessary bottles. Right now we will show you step-by-step instructions on how to make a palm tree from plastic bottles - for beginners in country decor.

For such a palm tree you will need:

about 100 plastic bottles, volume 2 or 1.5 liters(brown and green);
sharp knife;
scissors;
thick wire or cable;
iron fittings or strong pin;
metal bushings and tubes;
metal sheet.

As you can see, financial costs for making this craft are minimal. Palm tree materials can be found around your home or at summer cottage, ask friends or neighbors. By the way, if you don’t have bottles of the required color, it doesn’t matter, transparent ones will do. Subsequently they can be painted and the tree will look even brighter. We have previously told you which ones can be made from scrap materials.

Let's go directly to the master class, according to which you can make a palm tree from plastic bottles with your own hands step by step for beginners. We are sure that the result will be your pride and will serve as an excellent garden decoration or a summer cottage.

First of all, we'll make leaves, for which we will need green bottles without labels. Cut the bottle in half, and make longitudinal cuts along the top of the bottle. Do not cut to the end, use the photo as a guide.
On a cable with a diameter of about 12-14 mm, string bottles nested inside each other in the form of a leaf.
You will need 7 of these leaves; you can adjust their length yourself by adding sections.
To make a barrel, cut the brown bottles so that you get a 6 wide stripes on each bottle.
Place the blanks on a wire or thick cable, gradually stringing the bottles one on top of the other.
Let's move on to securing elements into one design.
Take 2 metal rods or fittings and weld them to a sheet of metal. The length of the rods is about 25 cm.
Attach tubes with a diameter of about 2 cm on top of the rods.
At the end of the rod, weld metal bushings that will hold the leaves.
Attach the leaves to the palm tree by threading the ends of the cable through the welded grommets.
Form a trunk by placing the bottles with their necks to the ground and stacking one inside the other from bottom to top.
Assemble the entire structure and install it on your site, lightly burying it in the ground about half a meter.

The design turns out to be strong and reliable; it is not afraid of snow, wind, or summer heat.

Other ways to make a plastic palm tree

There are other ways to make a trunk and leaves for a palm tree. Here is one of them, in detailed pictures step by step.

Thanks to these photo instructions, the overseas palma will very soon be next to you on the beach. Even if you are relaxing by the river.

Paper palm trees are great for budget-friendly decoration of terraces, verandas, gazebos and patios, all kinds of parties, as well as school and kindergarten events. These palm trees are easy to make and even a child can do it. But even better is that, for all their cheapness and rudimentary nature, these palm trees really look very realistic.

To you will be required:
— Long cardboard rolls of paper towels or decorative wrapping paper (for a palm tree trunk, which can be made from a wooden, metal or plastic pole/stick, and other analogues);
- Brown paper, a lot - you can crumple it, you can use paper bags with at least 1 side of a single color - in general, everything that fits the definition;
— Dense green colored paper(you can glue a regular colored one in 2 layers for greater rigidity);
— Brown thin elastic bands or thin brown twine/rope;
— Stapler;
- Scissors;
— Adhesive tape;
— A stable decorative container in which you will “plant” your palm tree;
— Decorative pebbles or small shells;
- Sand.

1. If you use cardboard rolls as the trunk of a palm tree, you will have to glue several pieces together in length to get a palm tree required height. Glue it as securely as possible so that the palm tree does not suddenly bend at the wrong moment. You can even stuff the rolls inside with something hard and long at the junction. If you already have a long stem base, skip this step.

2. Using your hands, tear the brown paper into pieces with deliberately jagged edges, but wide and long enough to wrap around the base of the palm trunk in a spiral with a good overlap. Before wrapping the trunk, remember the paper with your hands for a more realistic palm tree look in the end.

3. Secure the wrapped paper to the trunk with rubber bands or thin brown rope. Place the rope and elastic bands with large distances between the turns so that the paper holds firmly, but its uneven edges can be bent to the sides. Wrap the entire trunk - bend the horizontal edges of the paper away from the trunk - this will look more like the bark of a palm tree.

4. Cut from thick double-sided green paper large leaves the most common slightly elongated and pointed shape - 8 pcs. Don't try to make them look like long rectangles with rounded corners, like living palm trees - this is not necessary. When you attach the finished leaves to the palm tree, they will look as expected. Fold the cut leaves in half along their entire length.

6. Take 4 of the 8 finished leaves, fold them together (in a stack) with their lower tips, but point the leaves themselves towards different sides- unevenly, naturally. Fasten the folded ends 2-3 times with a stapler. Repeat with the remaining 4 sheets.

7. Crumple up a nice ball of brown paper if you made the base of the palm tree from cardboard rolls. Insert the fastened lower ends of the two “bundles” of palm leaves quite deeply inside the upper roll of the trunk opposite each other, having first coated both the ends and the inner surface of the roll with glue. Place a ball of paper tightly on top to prevent the leaves from falling out and also to cover the hole in the trunk at the top. Spread the leaves and adjust their position a little if necessary.

If the trunk does not have a hole, simply use glue at the top and bottom of the fastened ends of the leaves, then wrap them tightly with thin brown rope around the top of the palm trunk. You should also put a drop of glue under the rope everywhere.

Add-ons:

— Try placing 2-3 palm trees in one large - wide and deep - container different heights and leaf size;

— To make this project even more eco-friendly, glue together newspaper leaves and paint them green with tempera, then cut out palm leaves from the resulting material.

What gardener wouldn't want exotic palm decorated it personal plot?

The first stage is preparatory. In order for the design of such an original decoration item to be successful, you must have everything necessary for this at hand. The main material from which the tree will be made is plastic bottles of green and brown. We will use green bottles to create the leaves of an evergreen plant, brown ones for the trunk. Quantity plastic containers determines the size of your tree, i.e. the more bottles, the taller and more luxuriant the tree; you will get the most luxuriant leaves using a 2-liter container. Before you begin crafting, all bottles must be cleaned of paper stickers and labels.

As auxiliary tool for mastery, you need to prepare:

stationery knife
sharp scissors
wide tape for fixation
metal base with rods, which will subsequently act as a trunk
rope with which you will tie the bases of the leaves on the palm tree.

The next step is the manufacture of the product itself.

Remember that in order for the tree to look aesthetically pleasing and beautiful, all bottles must be same size and diameter. During production we will use two colors - brown and green, so if you have green bottles of “different sizes”, then smaller containers can be attached to the base of the crown, but as for brown ones, vessels of the same size are needed.

Making exotic wood involves three main stages:

- creating leaves;

— barrel assembly;

- collecting all the parts and forming the tree itself.

Using a sharp stationery knife, cut the bottle into two parts, where the upper half will serve as foliage, and we do not need the lower half. In the upward direction towards the neck, with scissors or a knife, the bottle is cut into small longitudinal strips, and this is done with each green bottle. Then such peculiar foliage from half bottles is strung on top of each other, connecting them with a strong cord or rope. A cork is screwed onto the last and first bottle, through which a tourniquet is threaded and tied in a knot so that the container fits tightly together. The top of the palm tree should consist of 5-6-7 leaves, so depending on the amount of containers available, you create your own tree, controlling the size and splendor.

After the foliage is ready in in full, we move on to the trunk. The barrel, as said earlier, is made from brown bottles of similar diameter, we cut off the lower base with a knife, after which wide longitudinal cuts are made towards the neck, there should be 6 such longitudinal fragments. After a similar action has been done with each brown bottle, they are secured to each other, like the green vessels, only plastic barrel Now you need to put it on the metal rod in a vertical position.

The foliage is fixed at the upper base of the trunk, evenly distributed on all sides. Using tape and a tourniquet, the leaves are attached to the trunk. Our tree is ready, all that remains is to find a place for it in your garden.

Let's move on to installation. Ideally, this is a welded metal platform; failing this, it is immersed in the ground by 40-50 cm. For the longevity of your craftsmanship, it would be good to compact the tree installation site with soil or concrete.

This evergreen tree African savannah will turn your garden plot into a real oasis!

You will also be interested in the article “How to make a palm tree from plastic bottles, step by step instructions.” see for yourself.

Stretch ceilings: step-by-step instructions for DIY installation and dismantling DIY flowers from plastic bottles Crafts from plastic bottles for cottage and garden decor (100 photos) DIY chandelier: manufacturing principles with photos Decorative fireplace in the apartment Design garden paths: 25 interesting solutions Leaf crafts Do-it-yourself smokehouse - instructions, videos, and creation schemes Bathroom design 3 sq. m. Superiority wooden windows over plastic

A spectacular and eye-catching bottle palm tree will serve as a excellent option cottage decorations, garden plot, areas in the yard or kindergarten. Made with your own hands according to a simple scheme, it will not only decorate the surrounding area, but will also help a person to recycle large number plastic containers.

How to make a palm tree from bottles with your own hands

Those who like to make their most incredible fantasies come true will enjoy the master class on how to make a palm tree from plastic bottles. For the tree, dark brown containers are suitable for stem blanks and green containers for leaves. If there is no green container, it can be replaced with the most different colors: blue, yellow, red. Containers of kvass, carbonated sweet drinks or beer are useful for trees.

The principle of creating a palm tree differs depending on what the craftsmen found. To form a trunk, you can use a round support made of wood, where the bottoms are nailed, or a cable with wire is suitable, where containers with cut off bottoms will simply be strung. The leaves are distinguished by their splendor and length. If you want to get palm fans, then they are cut, notched and bent, and the elongated leaves are strung on a cable.

The area of the leaves and trunk depends on the size of the bottles, but you shouldn’t get carried away and use 6-liter or 20-liter water containers. Wood made from 1.5 and 2-liter plastic containers looks much neater different colors. The corks from them will also serve as a material for decoration - they are used to decorate the base of a palm tree, you can use them to make a mosaic for flower beds and the walls of children's houses.

How to make palm leaves

To make a spectacular palm tree with your own hands, you need to pay attention to the manufacture of its leaves. To make them, you need:

Cut the green bottles in half with scissors, top part cut into longitudinal strips so that the narrow diameter neck remains intact half a finger from the lid. The thinner the cut plastic strips, the more magnificent the crown turns out and the more natural it looks in the photo.
It is not necessary to take the same containers for leaves - this will not affect appearance. The resulting blanks must be strung on a prepared rigid high-voltage cable with a diameter slightly smaller than the neck to obtain one lush sheet. The number of leaves varies according to the prepared holes on the metal pipe used as a support. Then they should be secured to the stem blank.

Step-by-step instructions for making a bottle palm tree trunk

The next detail in the question of how to make a palm tree from plastic bottles will be the trunk. Step by step instructions:

The trunk is made from dark brown dense containers, from which the bottom is cut off right along the contour.
Then the resulting workpiece is cut to obtain inwardly curved petal segments that serve as an imitation of a tuberous trunk. They should be cut 2/3 of the way up, without touching the top.
Do required quantity The cost of segments depends on the desired height of the plastic palm tree.
When all the pieces are ready, you need to string them on metal tubes. To do this, the container is seated with its neck down on another slightly shifted to obtain a beautiful lumpy trunk. The principle of stringing is similar to making a cone. After this, all parts are secured.

Connecting individual parts and installing a palm tree on the site

The last step on how to make a beautiful palm tree from plastic bottles is to connect all the pieces together. What to do:

Prepare tough solid foundation from metal sheet approximately 40*60 cm in size and at least 5 mm thick to support the weight.
2 metal rods with a length of 25 cm or more should be welded to the base or holes should be drilled for fastening. They need to put metal pipes on them required height- this will be the base of the tree. In this case, the diameter of the pipes is left slightly smaller than the neck of the bottles for the barrel.
The upper part of the supports will externally resemble the drum of a revolver; for this purpose, 6-7 sections of pipes are welded onto them. The bottles for the barrel need to be assembled onto rods, and palm leaves are inserted into the holes of the “revolver”. For fixation, the cable inside them is bent, fixed from the top and inside the neck of the outermost bottle. To stabilize the bottle structure and hide the unsightly lower part, the base is buried half a meter.

To create a mini bottle tree that would decorate a room in an apartment, you will need the following principles:

The barrel needs to be made like this: cut off a third of the bottle from the neck, cut out 8 triangle petals on each part, without touching the neck by half a finger. Each segment is turned outward to produce scales. To save money, the second half is used in the same way, but first the required hole is punched in it with a hot knife.
Wide fan leaves can be made as follows: cut off the bottom of a 1.5 liter plastic bottle, divide the side part into 3 parts without touching the neck. Give the segment a petal shape by rounding at the end and narrowing at the throat. Bend it outward, cut the parts on both sides, form a fringe so that the uncut middle remains up to 1.5 cm wide. For fluffiness, manually shape each strip, bending it successively up and down.
Make the assembly in the same way as a large palm tree, only use a simpler base.

Video

A simple and inexpensive way to renovate the area near your home or on the playground can be to make crafts from ordinary plastic bottles. With a little time and imagination, you can create from this universal material everything you can do with your imagination. You can, for example, make a banana tree. And so that you can understand how to do this, we created a master class on a palm tree from plastic bottles that are unnecessary on the farm, quickly and easily with your own hands, it contains detailed step by step instructions and photo and video lessons.

This tree will serve as a wonderful decoration for a holiday for children or a theme party. The more plastic bottles you use to create one palm tree, the taller and more magnificent it will be.

Making a palm tree from plastic bottles with your own hands step by step

To create a palm tree we will need the following materials:

Plastic bottles different sizes and flowers
Scissors
Scotch
The basis for the future palm tree. Usually a metal rod is used.
Frame for future palm tree thick wire or metal pipe.
Styrofoam or artificial bananas
Yellow paint
Wire

Making a palm tree trunk:

1) In order to make a palm tree trunk, you need to take 1.5 liter brown bottles 2 and 2.5. First you need to cut the bottle from the neck side by about a third. You will need the upper part, but don’t rush to throw away the lower part - you can also make a barrel out of it by analogy.

2) Cut the bottom of each bottle with a heated knife. We will attach the frame of our palm tree to this cut.

It is necessary to cut the part of the bottle with the neck into 8 equal parts. You need to cut from the wide edge to the narrow.

Now we need to make these parts pointed in shape so that it looks like a petal.

3) Bend the resulting petals onto outside– it will look like a blooming flower.

Palm foliage:

1) In order for our banana tree to have leaves, you need to take green bottles (preferably different shades), white and yellow. The more colors you use, the brighter the palm will look.

2) Cut off the edge of the neck and the base of the bottle. We cut the resulting blank from the bottom of the bottle towards the narrow part into 3 approximately equal parts, but not all the way. There should be about 3 cm left to the end of the bottle. We give the edges of each part a shape like a narrowed semicircular petal. We begin to carefully bend these petals outward just as we did the trunk of a palm tree. The result will be something vaguely reminiscent of a three-blade fan. Now we cut each resulting sheet from the edge to the middle. You need to leave a little uncut space in the middle - about 2 cm. It looks like a fringe. The narrower the width of the strips you make, the more magnificent the fringe will turn out, and therefore the foliage of our palm tree.

3) Now the fringe strips need to be bent in different directions. 1- bend it up, 2- leave it as is, 3- down. This is how the sheet becomes voluminous.

4) There are 2 ways to decorate leaves. In the first case, we leave our blanks as is, and in the second, the blanks need to be strung on a flexible wire to create long, voluminous branches. In the second case, you will need more bottles, but the palm tree will also acquire a luxurious crown.

Top of a palm tree.

We take a dark brown bottle and cut it like a blank into leaves - from top to bottom into thin strips. We collect the pieces and wrap them inside.

Palm tree decoration.

We cut out blanks for bananas from foam plastic and paint them with yellow paint and carefully pass a thin wire through the top.

Collecting a palm tree:

1) Take a palm tree frame prepared in advance. This could be a thick wire or a metal pipe. And we begin to put the finished barrel blanks on the frame with the neck down. We put on the blanks first larger size and we begin to compose the details like a designer. We compose until there is approximately 30 cm left to the edge. Try to arrange the petals of each part in a checkerboard pattern. We secure the parts at the base with glue or tape.

2) Depending on what kind of leaves you chose to make, there are 2 methods of attachment: 1-We begin to attach palm branches to the remaining empty upper part of the trunk. This is done in the same way as the trunk was assembled. Don't forget to use pieces of different colors and arrange the leaves in a checkerboard pattern. 2 – attach the cable with the leaves strung on it to the frame of the palm tree at the very top and secure each leaf with tape.

3) Install the crown - glue the workpiece to the edge of the frame with the neck down.

4) We tie artificial bananas to palm branches

To secure our palm tree, we stick a metal pin into the ground about 30 cm deeper for stability (if desired, you can fill it with concrete), but so that at least 40 cm stick out from the ground - to string the trunk and put our palm tree on top.

Now our palm tree made of plastic bottles is ready.