Scher khan magicar 5 programming instructions. Scher-Khan car alarm programming. Auto start by battery temperature and voltage

Sherkhan 5 is the possibility of remote security control using a key fob. The car alarm consists of two components - the switch itself with an LCD display and processor unit built into the car.

[ Hide ]

Description and characteristics

The processor unit connects directly to the car battery and runs on 12 volts. Its main function is driving, receiving and transmitting information from sensors.

The key fob switch is used to control the system by the user. In particular, setting the PIN code, programming functions, as well as turning on and off the car's protection.

The equipment is supplied with an additional key fob and detailed instructions. At the same time, there is a manual for both operation and installation of the system. However, not recommended self-assembly systems. It is better to ask to put it to the car service masters.

Main functions

Key fob-switch is designed for direct impact on the system by the user. It is equipped with four control buttons and a display that displays all the necessary current information.

With it, you can turn the system on and off, as well as program the main unit. The power source is only one AAA battery.

The choice of a particular command is displayed on the screen, and is also accompanied by sound and vibration. The display is backlit automatically when the buttons are pressed, as well as during an alarm.

The functionality of the electronic key fob also includes:

• MAGIC CODE - protection against interception of encoded data;
• display of the current battery level;
• displaying the voltage level of the car battery;
• the possibility of remote engine start, including delayed.

You can also check the temperature in the cabin at this moment and see the current time.

The key fob has a special signal reception range and is able to function at a distance of up to one and a half meters from the car. The processor unit is directly responsible for the protection of the transport and the reaction to pressing the key fob buttons.

Its main functions are:

• automatic engine start on command;
• indication of the delay time for turning on accessories;
• disabling car protection by PIN-code in the absence of a key fob;
• obtaining access to the salon by PIN2;
• control of the car's central lock and trunk lock;
• control alarm;
• the ability to protect the car with the engine running.
• The settings allow you to start the engine in the following ways:
• with a frequency of two, four or eight hours;
• every day at a certain time;
• by analyzing the performance of the car - temperature or voltage.

Another available function is programming the maximum and minimum starter rotation times, as well as setting it to increase with an increase in the number of start attempts.

PIN codes are set by the user and are used for emergency access to the vehicle.

Technical specifications

This system can be built into any car, regardless of the type of engine and gearbox. It is possible to start engines equipped with a turbine.

Alerts are divided into three types:

• sound to the siren - lasts for thirty seconds, sounds continuously;
• optical - power one hertz, also lasts thirty seconds, works on two channels, is emitted intermittently;
• through a radio channel - a range of up to one and a half meters, lasts one hundred milliseconds at a frequency of 0.35 hertz, sounds intermittent.

The exact range of the switch depends on a number of factors, including obstacles, interference, certain weather conditions, and battery level.

The system is managed in one of the following ways:

• remotely using a key fob;
• from the ignition key;
• by triggering the driver call sensor;
• as a response to certain sensor signals.

Electrical circuits are protected by fuses, resistors, and transistors. Additionally equipped with varistors that protect against power surges and interference. The functioning of the system even when the polarity of the power sources is reversed is ensured by diodes.

There are contact sensors that react to opening doors or turning the ignition switch. In this case, the system generates an alarm signal without the possibility of disabling it.

The system also responds to shocks by issuing a signal lasting up to 30 seconds in one cycle. All keyfob radio transmissions occur over a secure channel using special encoding.

The processor unit is characterized by the following parameters:

• work at a voltage of 9 to 18 volts;
• current strength from 20 to 35 milliamps is allowed;
• operates at temperatures ranging from -40 to +85 degrees Celsius;
• the total weight of the device is 270 grams;
• dimensions 150x120x32 mm.

User guide

The system can be configured through the unit or from the key fob. The first is controlled with the help of strokes, and the second - with the buttons. The functionality of the key fob is very wide.

With it, you can:

• set automatic arming;
• stop the alarm mode;
• block the ignition or starter;
• activate the option " Free hands»;
• remotely turn on and off the engine;
• activate the "Panic" mode;
• open trunk;
• connection of the "Turbo" mode;
• program the PIN1 code.

The system block allows you to apply and change PIN2, as well as activate a call to the owner of the car.

PIN code programming

Setting your own PIN1 code takes a few minutes and is not a complicated procedure.

To switch to the programming mode, you need to perform a number of actions:

1. Disable security first.
2. Then open the car door.
3. Turn on the ignition, but do not turn on the engine.
4. Then make a long (about 2 seconds) joint pressing of buttons 3 and 4 on the remote control.

The system will respond with a single beep and flash. However, if you receive a triple beep in response, it means that you have not entered programming mode. Check if you did everything right. It is important that the security mode is disabled, and the ignition, on the contrary, is turned on.

The first digit of the PIN code is given four seconds after the beep. This is done by pressing the key fob button. Its number is equal to the selected number. The selection is confirmed by the appropriate number of beeps and flashes.

The remaining four digits of the code are entered in the same way. They also need to be specified within four seconds. Entering the latter automatically ends the programming mode. This will be indicated by the double sound of the siren and two flashes of the alarm.

After completing the input, you can turn off the ignition and close the car doors.

The PIN2 code is set in the same way:

1. To do this, you need to remove the security mode, open the door and turn on the ignition.
2. Then you need to hit ten times on the call sensor with an interval between hits of less than one and a half seconds. For each hit, the LED will respond with a red indication.

The activation of the programming mode will be accompanied by a fast flashing of the blue LED. Each digit is programmed by strokes. Their number corresponds to the number. One and a half seconds after the input, the input is confirmed. The unit emits the corresponding number of blue flashes, after which it returns to flashing mode.

Enter the rest of the code in the same way. Confirmation of data entry and exit from the programming mode will be accompanied by a single siren sound and a single alarm flash.

Arming

In order to enable the security mode, you must turn off the car ignition and close all doors. After that, a single short press of button 1 on the key fob is performed. Thus, the mode is connected, the starter is blocked and all doors are locked.

Activation of the mode is accompanied by the following indication:

• single siren sound;
• single flashing of the alarm;
• blinking of the indicator with an interval of one second;
• car headlights flashing five times and the closed lock icon on the key fob;
• single switch signal.

The closed padlock icon then lights up and remains displayed until the vehicle is unlocked. From this point on, the system continuously analyzes and monitors the sensor readings. Thirty seconds later, the shock sensor is activated.

If the engine remains on, the installation process guard mode somewhat different. As in the previous case, it is necessary to close all doors and press button 1 on the switch once.

The mode activation indication is similar to the previous case. In this case, the shock sensor will be disabled until the vehicle ignition is turned off. Thirty seconds after the engines stop, the analysis of such signals is turned on.

Button 2 on the key fob is used to disable the security mode.

Keychain - communicator

Before you can start using the key fob, you need to set it up. The first step is to install the power supply.

The symbols on the display show the following information:

• transmitter signal strength;
• battery level;
• clock indicator, as well as the voltage level and temperature in the car;
• state of the lock (open/closed) and security mode;
• disable the shock sensor;
• turning on the vibration signal;
• information about the running timer;
• TURBO mode (enabled/disabled);
• state of the VALET mode;
• display of an open trunk and / or car doors;
• signaling siren;
• inclusion of dimensions;
• visual display of the alarm.

There are also some other symbols representing certain processes.

System check

By pressing the fourth button, you can check the status of the system. The information will be shown on the display.

Cabin temperature Battery voltage

Also, the information is confirmed by a siren and alarm.

Table of signals when checking the status of the vehicle system

Autostart security system

It is possible to automatically turn on the car security system. It can be programmed with a key fob.

In this case, the system will be armed 30 seconds after all doors are locked. At the same time, an appropriate indication and a siren are issued. For another thirty seconds, you can still open the trunk or car doors. If this is done, the auto-on countdown is delayed by another half minute.

If this function is enabled, the PASSIVE indicator will be displayed on the keyfob display.

Auto engine start

The system assumes automatic start of the engine. This is essential in order to maintain certain parameters car, as well as warming up when it is in the parking lot.

Automatic start can be controlled by both sensors and set user timer.

Auto start by battery temperature and voltage

Automatic start of the engine on the machine can occur on a timer or based on the readings of temperature and voltage sensors.

Thus, the number of timer starts is controlled depending on the temperature in the cabin or the voltage level of the car battery. This is configured with a key fob.

The temperature threshold can take one of the following values: -15, -25, +60 degrees Celsius. Restriction according to the voltage level can take only one value - 11.5 volts. Thus, it is possible to adjust the activation of the timer depending on the current parameters of the sensors. This allows you to regulate the temperature of the passenger compartment, as well as maintain the operating voltage in the battery.

Autostart by timer

It is necessary to set the remote autostart of the system by timer in this way: simultaneously press buttons 2 and 4. It is also with their help that the start time is set.

When the timer is turned on, the TIMER indicator on the display lights up, and the engine is controlled according to the time specified by the user.

There are four different engine start modes according to the pre-set timer:

• daily at the specified time;
• periodically, every eight hours;
• every four hours;
• every two hours.

Periodic activation is used to control the temperature in the cabin (heating or cooling the space).

It is possible to install only one mode, it is not supposed to combine them. Setting another behavior automatically disables the previous one.

Turning the engine start on and off according to the timer is accompanied by sound signals and light indication. The display flashes five times.

The exact time of automatic start needs to be specified only for daily switching. In all other modes, the report starts from the moment the function is enabled.

Why the autostart of the Scher-Khan Magicar 5 alarm may not work

If the Sherkhan Magikar 5 autostart system cannot start the engine remotely, the key fob will emit three short beeps. Accordingly, there will be three flashes of the alarm, and after three seconds a series of flashes will occur. This series displays which error has occurred.

Therefore, depending on the number of flashes, you can determine why the engine does not start:

1. If there is one flash, it means that the engine is already on.
2. If two, the ignition is on.
3. If three - opening one of the doors prevents starting.
4. If four - a similar situation, but with a trunk or hood.
5. In the event that the system responded to you with five flashes, the start reservation for the car in manual transmission has not been made.

If the remote engine start does not work, the system will try to start it again. In the event that this fails to be done three times in a row, the alarm will go into standby mode. If this happens, then the car will no longer start, you must contact service center to determine the cause of the problem.

Video "Autostart stopped working"

What to do if the car does not start from autorun is described in the video from Seryoga.

The instruction manual attached to Sherkhan Magikar 5 consists of sections devoted to setting up and installing the security complex. The documentation has been translated into Russian, there are additional graphic explanations that allow the driver to adjust the alarm on their own.

Specifications

Technical parameters of the alarm Scher-Khan Magicar 5:

• frequency range - 433.92 MHz;
• transmitter power - no more than 10 mW;
• communication range of the communicator - up to 1500 m;
• current consumption - up to 35 mA;
• mass of the central block - 270 g;
• supply voltage - 9-18 V;
• product protection class - IP40 (except for the siren).

Equipment

In a set of automotive sherhan alarm Magic Car 5 included components:

• head unit with processor and relay units;
• communicator with 2-way communication channel;
• auxiliary console;
• shock sensor;
• driver call shock sensor;
• antenna unit with connecting harness;
• temperature sensor;
• separate relay with mounting block;
• siren and additional limit switch;
• kit power cables with connectors;
• instructions for installation and configuration;
• sticker set.

Functions

Alarm with auto start Scher-Khan 5 has the following functions:

• support for supercharged engines;
• disabling password protection;
• 2-stage deprotection;
• giving alarm signals with lamps and a siren;
• automatic and remote start of the motor;
• joint work with standard blocks of the central lock;
• additional channel for controlling the luggage compartment lock;
• automatic activation of protection;
• cabin light off delay mode;
• support for the protection of a car with a running engine.

Panic and JackStop modes

To enable the function, a long action on the IV button is used (the type of activated mode is indicated when programming the processor unit). If the alarm has been disabled, then when a signal is received, the doors and start circuits are blocked. Sound and light alarm is activated, which lasts 90 seconds. When the "Panic" function starts, all programmed algorithms for automatic engine start are canceled. To disable the modes, briefly press the buttons marked I and II.

Hands free mode

The design of Magic 5 provides for the possibility automatic shutdown and the inclusion of protection. When the alarm mode is active, the alarm responds to the radiation of the transmitter, which is captured at a distance of 15 m. When the owner moves away from the car, automatic arming occurs, and when he returns, the protection is turned off.

To activate the "Hands Free" mode, you need to perform a long press on the I button. After the icon with the text Auto appears and the melody is broadcast, you need to briefly press the IV button. An icon with the text "Holy hands" is turned on on the scoreboard. The mode is deactivated by long pressing the I key.

Valet mode

When transferring the car to a service station, the mode of temporary disabling of the security functionality is provided. To turn on, use the complex pressing of the keys I and III, which are held for 2 seconds. When the function is activated, the ability to control the door locks remains, the icon in the form of 4 letters Z is turned on on the communicator display. Repeated long-term pressing of the buttons allows you to disable the mode.

Advantages and disadvantages

Advantages of car alarm Scher-Khan 5:

• no failures in work;
• a small number of false positives;
• signal reception range;
• automatic engine start;
• long battery life in the communicator.

Disadvantages of equipment noted in the reviews of the owners:

• interruptions in operation at air temperatures below -35 ° C;
• there is no cellular communication block;
• a simple encoding algorithm that is opened by signal scanners;
• there were cases of involuntary triggering of the owner's call sensor;
• the standard siren has a low volume;
• Chinese copies are common on the market, imitating the original packaging and products.

Installation instructions

The algorithm for "dummies" is given in the factory documentation:

1. Place the antenna unit in the corner part of the windshield; it is allowed to mount the unit under the interior trim. If the owner installs the unit discreetly, then the range of the remotes may be reduced (due to antenna shielding).
2. Place the call sensor on the surface of the windshield, the installation point is preliminarily degreased.
3. Mount the siren under the hood of the car. The node is located at a distance from sources of heat and moisture.
4. Locate additional limit switches in areas not exposed to moisture.
5. Fix the processor module inside the instrument panel. Screws or plastic clamps are used for fastening. Equipment shipped from the factory does not have key fobs stored in memory. Before use, it is required to program the remote control codes.
6. Glue the shock sensor inside the car (on a metal base). Provide free access to the sensitivity adjustment rotary potentiometer in advance.

Wiring diagram

After the installation is completed, connect the Sherkhan 5 alarm to the on-board network and connect the electronic units to each other. The instructions include a connection diagram, before starting the connection, you should study the documentation. The connectors use cables equipped with insulation different color, which allows you to determine the purpose of the cord. Cable connection points are protected insulating tape, it is necessary to provide protective fuses (mounting locations and rating are indicated in the diagram).

How to use the alarm

The User's Guide that came with your equipment contains a section on how to use your device. There is a separate chapter describing the functioning of the security complex. The driver of the car is recommended to study the manual, and then draw up individual sections (for example, a description of the emergency shutdown algorithm) in the form of a memo that is stored along with the documents for the car.

Symbols on the display

Before you start using the alarm, you need to remove the safety insert glued on the contacts of the communicator. When the battery is correctly installed, a melodic signal is given, indicating that the device is ready for operation.

On the LCD screen of the Scher-Khan 5 alarm communicator there are symbols for displaying:

• the state of the battery;
• operating mode of the device;
• fields for displaying hours;
• protection mode status indicators;
• siren operation mode icons and shock sensor;
• explanatory inscriptions when the engine is actively started by a timer or a turbo timer is running;
• indicators of open body panels;
• turning on the "Hands free" mode;
• the icon of a call coming from the car;
• indication of the operation of lighting equipment or a power unit;
• service mode activation signal Valet.

Button assignment

The buttons located on the communicator support 4 modes of operation:

• short exposure;
• long (more than 2 seconds) pressing;
• fast complex action on 2 keys;
• long-term joint holding of 2 buttons.

The driver, by pressing the buttons of the communicator or the auxiliary remote control, turns on or off the security mode, activates remote start and other functions. The keys are used to configure the remote control with a display, are used during programming of the central unit. The purpose of the buttons is indicated in the relevant sections of the operating and configuration instructions.

Time setting

To program the clock, a joint long press on the II and III keys is performed, and then the driver enters the settings menu (by briefly pressing the I button). To adjust the values ​​of hours and minutes, the keys I and II are used, to store the result in memory, a long action is made on II and III (until the buzzer sounds).

Arming and disarming

To turn on the alarm, you must press the I key. A siren will sound, external lighting will work, and then the engine start circuits will be blocked and the locks will be locked. Explanatory icons appear on the communicator display.

To disable the protection, the II key is used, the complex gives a double signal with a siren and external lighting equipment.

The control diode turns off, the icons in the form of car headlights and a lock with an open shackle flash 5 times on the display.

Remote start from key fob

The start is made by a long action on the button II. After the locks are locked, the engine starts, the display of the communicator shows the remaining operating time (pre-programmed). The driver can disable the security, place the key in the lock, and then activate the ignition and start driving. You have 20 seconds to complete the action, otherwise the engine will turn off.

Trunk opening

Car alarm Scher-Khan Magicar 5 allows you to control the lock of the luggage compartment lid, to unlock you need to long press the button III. At the same time, the security mode is disarmed and the doors are unlocked. The driver can program a mode in which the side doors remain locked or the armed mode is not disabled (the lid limit switch and the shock sensor are temporarily turned off). In this case, after locking the lid, the protection is automatically activated.

Silence the siren

A complex short-term pressing of the keys marked I and II allows you to turn on or off the signaling of the siren and lamps. The value of the function is preset when programming the block. When the silent mode is enabled, the communicator's buzzer remains active. After the mode is canceled, the icon with the image of a playing pipe turns on on the screen.

Programming instructions

Before starting the setup, the security mode and the “Hands Free” function are disabled. To start the setting, a long press on the buttons I and II or on I and IV (to enter table 1 and 2, respectively) is performed. Then, by successive pressing (corresponding to the function number) on the IV button, a section is selected. The security complex gives siren signals confirming each keystroke. After entering the section, an additional signal is given by lamps and a siren (according to the serial number of the function).

The programming table given in the documentation contains explanations that allow you to correctly set the parameters. By pressing the buttons mounted on the communicator, the driver selects the desired parameter value (confirmed by the siren and flashing alarm). To set up each function, you need to go through the entire algorithm again.

How to enable autoplay

To activate autorun, it is required to perform a complex action on the key fob buttons marked with numbers II and IV. The message Timer will turn on on the remote control panel, the frequency of repetitions is indicated in advance in the programming menu of the processor unit. Car alarm Sherkhan Magic does not allow simultaneous activation of 2 modes.

To ensure that the motor starts on a timer, it is necessary to set the clock and the operating parameters of the alarm clock. After pressing the buttons II and III together, the inscription Pro9 is activated on the display, further pressing the button II turns on the timer adjustment. The driver uses the buttons marked I and II respectively to change the hours and minutes. After adjusting the parameter, press the keys II and III.

The Sher Khan Madjikar 5 complex supports starting from external equipment. Additional programming of the processor unit is required to enable the motor to turn on. To save battery life, the number of restarts is set, the driver programs the number of repetitions, and the restriction can be removed.

The equipment supports starting on a signal from temperature sensor located in the cabin, or critical voltage in the car's onboard network.

Before using the function, it is necessary to enter the threshold values ​​by programming the central unit. Simultaneous activation of automatic start by timer, temperature and voltage is allowed. The motor starts when the parameters fall below the threshold, but the repetition rate is limited by the timer settings.

Faults and their elimination

When the control panel and the head unit are out of sync, the command translation process is disrupted. The algorithm for re-entering the remote into memory depends on the settings of the head unit. To start the procedure, you need to turn the ignition on 3 times, and then turn the key to the "Off" position. After the flash is fired by external lighting equipment, the I button on the programmable remote control is pressed, and then, by analogy, the remaining devices are recorded (no more than 3). Each step of the procedure takes 4 seconds.

If a password entry algorithm has been programmed, then after a triple switching it is required to enter the first register of the code (by turning the ignition circuits on and off). The number of turns corresponds to the previously programmed figure. Then, using a similar procedure, the second register is entered (4 seconds are allotted for each setting step). After confirming the input (single flash of the lamps), the remote control codes are entered into the alarm memory.

A common malfunction of the Scher-Khan Magicar V 5 is a breakdown of the control panel caused by wear on the button mechanisms or moisture on the electronic components. To restore functionality, you need to disassemble the device, and then remove traces of oxidation and replace worn components. If repair is not possible, a new communicator must be purchased, which is then registered in the central unit.

If the alarm does not arm, it is recommended to check the settings. When turned on remote mode Valet happening automatic shutdown security (only locks work). The cause of the malfunction is the breakdown of sensors or limit switches, as well as damage or breakage of the connecting harnesses. The check is performed by a test device, for a detailed analysis of the causes of failure, it is recommended to contact the service center.

To set autorun with Scher-Khan keychain magicar 5, press button 2 on the key fob and hold it down for more than two seconds. With this manipulation, the car will be set to armed mode with the engine running, the doors will be locked, and after that the engine will be started. If the engine is started successfully, then the key fob will display information about how much time is left for the engine to run before stopping (it is most convenient if the time interval is programmed in minutes - from 5 to 45 minutes). If the launch has taken place, then in the distance you can see light smoke from the exhaust pipe.

To start a trip, during the set autostart interval, when it has not yet expired, open the driver's door, insert the ignition key into the lock and switch it to the position that corresponds to the inscription on the ignition on. All these actions must be done in no more than 20 seconds, if you delay in time, the ignition will not turn on and the engine will be turned off. As you understand, this is provided to prevent malicious attempts to steal your car.

If the launch fails, the Sherkhan Magikar 5 system will make a second and then a third attempt to start the engine. If all three attempts to start did not take place, then the security system will stabilize in standby mode. To re-initiate the autostart function, you must first make sure that the engine is working.

Why autorun Scher-Khan magicar 5 does not work

Possible reasons for autorun failure are as follows:

• discharged battery;
• the temperature outside the window in winter has reached a critically low level (preventing the easy operation of this function);
• other ICE systems could malfunction, making it difficult to start the engine;
• car electrical failure
• problems are related to the immobilizer, which prevents autorun;
• the indicator shows smoke, although the engine did not start, so the system does not attempt to start 2.

If, when the key is flogged, the ignition works, and the auto start from a distance does not work, then you need to reprogram it, you can try to do the following - make the start periods shorter and set the response temperature higher.

How the Sherkhan Magikar 5 alarm works during launch:

When it is not possible to set to autorun:

• with the ignition off;
• if not all car doors are closed;
• if the motor is already running;
• in cars with mechanical transmission - if the "redundancy" mode is not active.

If the remote start is successful, then the corresponding systems behave as follows:

When the engine is automatically stopped, the systems behave as follows:

How to set the warm-up interval for autorun Sherkhan Magikar 5

To get started Scher-Khan installation magicar 5 in time, simultaneously with two fingers, press the first and second buttons on the key fob and hold the buttons like that for some time. (The autostart interval is possible 2, 4 or 6 hours - which specific value to choose depends on the condition of the battery and engine.)

1. Briefly press the Roman buttons 2 and 4 once without holding them down - this will turn off the timer.

2. Press the Roman button 4 13 times (after each pressing, the siren will confirm), then wait until the siren confirms the received signals 13 times.

3. It remains to select the autorun interval: to set autorun after two hours, press the Roman button 4, so that after 4 hours, press the Roman 3, after 8 hours, press the Roman 2.

4. Finally, finish the auto-start setting by turning on the timer by pressing Roman buttons 2 and 4 once and immediately releasing them.

How to set autorun Sherkhan Magikar 5 by temperature in the cabin

1. First, in a way already known to us, you need to turn on the autorun mode by time - to do this, press button 4 13 times (after each press, the siren will confirm), and then wait until the siren confirms the received signals 13 times.

2. Switch to programming mode. To do this, simultaneously press two fingers on the first and second buttons on the key fob and hold the buttons like that for some time.

1. Deactivate the timer (if it is not already off) by briefly pressing buttons 2 and 4 simultaneously.
2. Press 21 times on the Roman button 4 - the siren should turn on.
3. Wait until the siren sounds 21 times, and then proceed to the temperature selection.
4. To turn on autostart at minus 25°С, press button 3, at minus 15°С, press button 2.
5. Restart the timer? by pressing buttons 2 and 4.

How to program the warm-up time

The warm-up time on the Sherkhan Magikar 5 alarm can be selected in the form of specific time periods in minutes (5, 15, 25 or 45 minutes).

1. First you need to turn on the programming function by simultaneously long pressing buttons 1 and 2.
2. Press button 4 12 times, each press will be accompanied by a sound confirmation, and the final confirmation of programming is 12 siren sounds in a row.
3. It remains to set the warm-up time. To warm up for 45 minutes, press button 4 to 25 minutes. – button 3, 15 min. – button 2 and 5 min. – button 1.

How to program autostart by on-board voltage

You can program auto start, in case the battery is discharged to 11.5 volts.

• Enter the time trigger mode by pressing button 4 13 times.
• Activate the programming function by simultaneously long pressing buttons 1 and 2.
• Press button 4 20 times without stopping, after which the siren will also sound 20 times.
• Press button 2 - in this way you will turn on the autostart operation mode by battery voltage.

The most common problems with autorun

1. The “Valet” mode is activated when the car is urgently disarmed (zzzz signs appear on the key fob). To solve the problem, you need to, with two fingers at the same time, press buttons 1 and 3 for more than 2 seconds.
2. When the ignition is off, the car does not stall. The doors are locked, and in order to deactivate autorun, you need to activate the car's doors. To get out of this situation, you need to use button 2 to perform functions from 1 to 16. To turn off the engine, you need to turn the ignition key to the "Ignition Off" position.
3. If you urgently need to remotely turn off the engine when autostart is running, then press button 2 and hold it.

Video: Setting up an auto-start alarm Scher Khan magicar 5 on manual transmission

Video: The car does not start with the Scher Khan magicar 5 alarm. Finding the cause

If the video is not showing, refresh the page or

Programming the CTCTS functions using a key fob consists of four steps.

1. Enter programming mode and select the programming menu. To enter Menu No. 1, press the I + II buttons simultaneously for 2 seconds. To enter Menu No. 2, press the I + IV buttons simultaneously for 2 seconds. The siren will sound one short beep and the vehicle alarm will flash once, confirming the successful completion of STEP 1.

2. Press the IV button to select the Menu function you want to change. The number of presses must correspond to the number of the selected function. For example, to select function 4, you need to briefly press the keyfob button IV four times. Each button press will be confirmed by a short siren tone (if enabled) and a flash of the car alarm.

3. Wait a few seconds. The system will confirm the number of the selected function to be changed with short siren beeps and car alarm flashes. The number of signals will correspond to the number of the selected function.

Note:

If, when choosing a function, you made a mistake with the number of clicks and (or) there are no siren and alarm signals, then you must repeat all the actions starting from STEP 1.

4. Press the I button to select the factory setting for the function. To confirm this, the siren will give one short signal, the alarm will flash once. Press the II, III, or IV button to select optional function values. To confirm this, the siren will give two, three or four short beeps, the car alarm will flash two, three or four times.

Note:

If you hear one long signal from the car alarm siren, this means that the system has exited the function programming mode. To continue programming, repeat all steps from STEP 1.

ATTENTION!

If you want to change more than one function from the Menu you have selected, then the selection of each function to change must begin with STEP I.

Menu of programmable functions

Menu #1 [Button (I + II)-]

Note on function 1-4: This function allows you to select "Panic" or Jack Stop mode™ (robbery protection):

Resetting all programmable functions of Menu No. 1 to factory defaults

1. Enter programming mode. Press buttons I + II simultaneously for 2 sec. The car alarm siren will sound one short beep and the alarm will flash once, confirming the success of STEP 1

2. Briefly press button III on the car alarm key fob three times. Each press will be confirmed by a short siren tone and an alarm flash. After some time, three siren sounds will sound, the alarm will flash three times, confirming the factory settings of all menu 1 programmable functions.

Menu #2 [Button (I+IV)-]

Resetting all programmable functions of Menu No. 2 to factory defaults

To reset the programmable features to factory defaults, two steps are required.

1. Enter programming mode. Press buttons I + IV simultaneously for 2 sec. The car alarm siren will beep once, the alarm will flash once, confirming the success of STEP 1

2. Briefly press button III on the key fob three times. Each press will be confirmed by a short siren tone and an alarm flash. After some time after this, three siren sounds will sound, the car alarm will flash three times, confirming the factory settings of all programmable car alarm functions of menu No. 2

KEYFOB-COMMUNICATOR CAR ALARM SCHER - KHAN 5

Preparing the key fob-communicator for work

Before using the key fob, you must bring it into working condition, because. during transportation and storage, an insulating gasket is installed between the contact of the battery and the contact plate of the key fob, which prevents the battery from discharging before operation. Before using the key fob, remove it. To do this, release the battery cover lock, press the cover and slide it in the direction opposite to the antenna. Remove the battery. Remove the insulating pad between the battery and the collector plate. Install the battery back, observing the polarity indicated on the bottom of the battery compartment. If there is no indication of the polarity of the battery, then it is set with a negative terminal towards the antenna. Close the battery cover. After that, the keychain is ready to work.

Symbols on the display of the key fob-communicator of the car security system

	Timer start indicator
	TURBO mode indicator
	Passive arming indicator
	"Hands free" mode activation indicator
	Siren indicator
	Shock sensor off indicator
	Vibrating alert indicator
	Power indicator automatic control CZ for ignition
	Door open indicator
	Trunk/hood open indicator
	Shock sensor alarm indicator (optional sensor)
	Car owner call indicator